mirror of https://gitee.com/openkylin/linux.git
3901 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
926b02d3eb |
pci-v4.21-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlwtMCIUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vwQUQ/+P5/VDpo4abjudGO2c7FU1bJOwvfN cfV5dvDCw0kpx0Em5SmnpAD7Punllxxvb/04K75lqarGyx/Txqaw+lbIF+qSj6my GsQ16Iy8T48x5hr+Pf6vTh1eE+NaAVZfOPDOt7CyTNAgwfzHeVNyfNvz7pfKTIIJ Mk/jRE4kkeWo60jsY5p3sFo3OVOxBOsRdN+2sruaQuWFXrKHLyNDR+7Z9ZPxubFk cCO/TYPhNXmmKhCAR4V/rGiqz9OL2wyFixGhGhmD3tnC9nAb/wTMzjARsyBopBPi b/KkR2eLFEyXN0HJrwqxiURo4J3nveAYEuNXH5KjRBQZnoBCGSCIlqFhlrp9vdBk B4KIdT8h/M6LsVGeVSEIxIEXCp67YE31kxraFrk4Vsggdh2TFQ0llh1sajj8IFJB XekutedAOlTSOaM1/jvVPUJYg04X90bp3uXn3IU45XlQ8nBOG3immFVITRLkvd3w ywH+SEdeZAhWl3RGy8SHhqdeCJ7nNQbcRaRJ5CoWJBDNJTBGF1X+zJD2Swi6H9vA nWGNRlb3CPPIMPF127nADnOE7Cj2FlpAEIEu52HpcpIrhEdrGvLkGeQfgdWBjbyU aHwC04bLWnvsA9SEFVnuMIBaFQmJ1RuaWAHdtscyyO2uoeCtN8Aa+BX6jXFbVZQN 9eFzpiv0kUiXlAQ= =g1ia -----END PGP SIGNATURE----- Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ... |
|
|
Linus Torvalds
|
b23b0ea370 |
ARM: SoC: late updates
A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a build
fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante
GPU, 256MB RAM, Wifi). This includes some acked platform-specific
drivers (serial, etc). This also include DTs for two boards with this
SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs.
-----BEGIN PGP SIGNATURE-----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=qgZw
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
|
|
|
Linus Torvalds
|
b7badd1d7a |
ARM: Device-tree updates
As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlwqgVYPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3ybAQAKAhd7XI5oY/wgdZZmxwcX+p7sU6LXeIlpWU XsPN1c14KU0siQv/znVA5OpF+fgn9eRqfWnMoDPlvdScTq07FM2NBmOJfVJYDPJa uvsll5m+84FCYanIR//YybS0tCM0b0BHoHo2DoyIxWeAwmw7BBVslddBdNg6R7hG S9rU9rUeqfCj7HbcPLqVn0DecMtEe7R8zmDtG1CSMqrhncifmoV4gtUnbYAg0GGT cSvj/zT8A1j0oJcU2Upl/Fr+7WJ7XB9pnku91nUOSXLv5VkyctLGomKq5F7O2/Xs 2DhpH2yKwQt7S7TDiDd0jy64Of6+Xup35wEHevCeKrzGXcVRqqHwCkanLz9FdjVt yg4UrI/P1nY7h4ifZPplgigv+kA+IjRGiMrTRIEgSE5YK9U5AYkgembTWksRDikd 5EpeJcMj2tBv4SDellNNtzh6GGTPBf3GJw3P9uRuxnQY/T31N2eX0XGeRikL+Lzf 9nbQdJealmql3rCa5oFEJwSxrSaAv/ub7/294kPdEmXj8+3qUuH3hZAZOI9LSXGW GCuxsgccB2GF1M48x48/QpHgxb93okyXmndONZnU8uN8ba0zS4b8QLwvIY5rqv5Z kqD1VPBQf9kGVyzDyABRjFmGCDJcoOJf4QrzvNk9+xo8fXVk1xNtxu4MUsHvc2lS cU2RYWm/ =sFVi -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ... |
|
|
Linus Torvalds
|
0922275ef1 |
ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups
- SoCFPGA adds explicit selection of ARM errata and removes some unused code
This tag also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release.
-----BEGIN PGP SIGNATURE-----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=m7me
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
|
|
|
Olof Johansson
|
8a66c20e66 |
Samsung DTS ARM64 changes for v4.21, part 2
Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to Exynos5433 TM2(e) boards. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwZUDoQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD1w6DD/0Uew7/eRS16gt6EChKidNjbMsAeMoe790n +CxlMEcopK4Eab1q0gftu1D++nTNHD0k6jxYLNQgKqg+zovDg/csYZiLX4F6W1Re jSWNXUQvoTXKc85MvCJW2tpo5if9rEJLm+OBDSL4ih524SMzPvySp9eRFNKP7jy3 PPgdkwkXiCtRhzIIGa/fWxYhbkJ//k6poKFRPgVwQbcqKhbRLsHZCXRe7NRzTejU o8hGonjoekrou9JRR0jC82qNOan3vrAH//aAZJNlYdpjRC+tW/iGMLXK9wfPMQGO I1SaMETdfEES+uORqaVhcz778rCoBtj9jk9S2QnKLUhpLV6d+RcLHUMkXBQ3A9ZX EgtuzGcedcQHQiHvn0OBwOJYfY2cmQ+cQMWgL2jiETqlJD7bpAl8Zsv5rjZ/+vdI WGPC/4NSukbS8Va8gqqkLs6UElSJlV18NUayBqSPDvH2UMMSwn/ILV39fSxVpG/0 y1Tu2cpsMMwapHv3zC6RigvWZkOMx5DwD0TJg43iyCvvVhmo+9JV/GWhe7wM0ymX 29GL2F6PmIzpzAa3HdNeS7iAqYWmMvZ5e2c+6gvc0LGoP+QO2a2eRH8sy+iVF5JU uk8BZbXFfVeKU+K71Z83fm0zpQZY2GD9GJZYwEKVfQ0wGoXtjeJ5iQhWPohCC15V coWHMUKp2A== =JVh0 -----END PGP SIGNATURE----- Merge tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late Samsung DTS ARM64 changes for v4.21, part 2 Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to Exynos5433 TM2(e) boards. * tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: exynos: Add IMEM clock controller to Exynos5433 arm64: dts: exynos: Add all CPUs in cooling maps arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
a2edaf7893 |
i.MX8MQ device tree support for 4.21:
- It contains the initial device tree support for i.MX8MQ - the first
ARM64 i.MX processor. It features a quad Cortex-A53 core that
operates at speeds of up to 1.3 GHz, a Cortex-M4 core for
low-power processing, a DRAM controller that supports 32-bit/16-bit
LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video
playback.
- A couple of patches from Baruch that add watchdog device for i.MX8MQ
enable it for imx8mq-evk board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcFjGjAAoJEFBXWFqHsHzOqtcIAJqypaN00zz50FHWeZG3Z6qK
lcaseee6AMTxBZRpQdU1sZoONQ3Q4azlV4KJk/XZqCso6pqYkCc3yLrTb4y1YlBu
usH9Ap66KkqUXjT6239bysxOAxL73wV8ekn+al52PAcjEuYAWzmKoIbnRWijyZaE
BaLXpEInQxh8GhM7CddCZV6xbNem+d9zOm0YE46YltgZdfJGgxrTxdnWyC/8uGrX
FK+mnjaxjWa6gsnYf4PpYXZowpzsq1MOY1Hwk8snfSJPTA3wxus9VRIyEL2KalS+
mQ5pWwL1naRloQAa3/VLmp69+7B4MXnh0ws7WZmh/BB1JxZIes4RSE1jp1hWMJI=
=OAS0
-----END PGP SIGNATURE-----
Merge tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late
i.MX8MQ device tree support for 4.21:
- It contains the initial device tree support for i.MX8MQ - the first
ARM64 i.MX processor. It features a quad Cortex-A53 core that
operates at speeds of up to 1.3 GHz, a Cortex-M4 core for
low-power processing, a DRAM controller that supports 32-bit/16-bit
LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video
playback.
- A couple of patches from Baruch that add watchdog device for i.MX8MQ
enable it for imx8mq-evk board.
* tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
arm64: add basic Kconfig symbols for i.MX8
arm64: dts: ls1046a: add qdma device tree nodes
arm64: dts: ls1043a: add qdma device tree nodes
arm64: dts: ls1088a: Add missing dma-ranges property
arm64: dts: ls1088a: Move fsl-mc node
arm64: dts: fsl: Add all CPUs in cooling maps
arm64: dts: Add support for NXP LS1028A SoC
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
arm64: dts: fsl: Add the status property disable PCIe
arm64: dts: ls1012a: Add FRWY-LS1012A board support
dt-bindings: Add binding for i.MX8MQ CCM
arm64: dts: add LX2160AQDS board support
arm64: dts: add LX2160ARDB board support
arm64: dts: add QorIQ LX2160A SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Linus Torvalds
|
457fa3469a |
Char/Misc driver patches for 4.21-rc1
Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems to
be the "collection of various driver subsystems not big enough to have
their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems. This was discussed at the
Plumbers conference a few months ago and knocked into mergable shape
very fast by Christian Brauner. Who also has signed up to be
another binder maintainer, showing a distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXCZCUA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymF9QCgx/Z8Fj1qzGVGrIE4flXOi7pxOrgAoMqJEWtU
ywwL8M9suKDz7cZT9fWQ
=xxr6
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc driver patches for 4.21-rc1.
Lots of different types of driver things in here, as this tree seems
to be the "collection of various driver subsystems not big enough to
have their own git tree" lately.
Anyway, some highlights of the changes in here:
- binderfs: is it a rule that all driver subsystems will eventually
grow to have their own filesystem? Binder now has one to handle the
use of it in containerized systems.
This was discussed at the Plumbers conference a few months ago and
knocked into mergable shape very fast by Christian Brauner. Who
also has signed up to be another binder maintainer, showing a
distinct lack of good judgement :)
- binder updates and fixes
- mei driver updates
- fpga driver updates and additions
- thunderbolt driver updates
- soundwire driver updates
- extcon driver updates
- nvmem driver updates
- hyper-v driver updates
- coresight driver updates
- pvpanic driver additions and reworking for more device support
- lp driver updates. Yes really, it's _finally_ moved to the proper
parallal port driver model, something I never thought I would see
happen. Good stuff.
- other tiny driver updates and fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
MAINTAINERS: add another Android binder maintainer
intel_th: msu: Fix an off-by-one in attribute store
stm class: Add a reference to the SyS-T document
stm class: Fix a module refcount leak in policy creation error path
char: lp: use new parport device model
char: lp: properly count the lp devices
char: lp: use first unused lp number while registering
char: lp: detach the device when parallel port is removed
char: lp: introduce list to save port number
bus: qcom: remove duplicated include from qcom-ebi2.c
VMCI: Use memdup_user() rather than duplicating its implementation
char/rtc: Use of_node_name_eq for node name comparisons
misc: mic: fix a DMA pool free failure
ptp: fix an IS_ERR() vs NULL check
genwqe: Fix size check
binder: implement binderfs
binder: fix use-after-free due to ksys_close() during fdget()
bus: fsl-mc: remove duplicated include files
bus: fsl-mc: explicitly define the fsl_mc_command endianness
misc: ti-st: make array read_ver_cmd static, shrinks object size
...
|
|
|
Arnd Bergmann
|
54518ed457 |
Second Round of Renesas ARM Based SoC Fixes for v4.20
* R-Car D3 (r8a77995) SoC based Draak board - Correct CVBS input to allow probing of the VIN -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlwSVfcACgkQ189kaWo3 T755mg//dGKetDkpFwQJ1JQ6zYnWHBAO0Qqxft4RAAMOyg6S3B/cUxMisudk2Tg0 zANTzfJdUDqWb2dZZt5mz2eoNKvtO2akqePlPGfaqPB8NV4wzpqSA9Fpzwu21w32 8RjRGqPCisIjZ/aHex5rzeUP0FfQf3fM0yOxWA76MK1GsoaNrWtqRO8An/wg9+Nm lAQz+Ol9tdh7Hiz5fUleg2gfgLcPoQrYKkuDYcNC4xIhrU0+chVhw4Gzdk/xi2KW xAmk/RcAxGuxXErbL6kAhmcjPBPRMZa5sbCIikmMVXROoeMr2Up+Ndj0eQCUA6OT dk8Mi9E0YLvHq7aye2IG/V4fGhjKt039Ap4HLIs32sWnbHMDA5sZCUzSyCEZocUu mnDi//Kdo8Bk42hHRppvmkEN4vFH7dfWOq32qF7K/XranehRJoh1fdfOnpCmecYH j0z889q5kCMGJV2h0WPLqVI3XU4BKQKe/yqgZRuOAtklDIRaE6n/NQYPQDeRwhy1 dzWftWHuReW1rgVuMjiMzU2eQa6OfBte+lCrjYzPnWMTP9nyiTI1Zzr9qT9wY3O2 OmPdu+/FkUi5WMiRiqdqs0RO5gg1oj6uw68VSaFqjV4cxEXU1ZOiqEJdg98H11pR d3YhO8/UqBIL3K7s0tnQ5EXq83/BFlV87BPrZiOKGkjuTXy2EZk= =BNeo -----END PGP SIGNATURE----- Merge tag 'renesas-fixes2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC Fixes for v4.20 * R-Car D3 (r8a77995) SoC based Draak board - Correct CVBS input to allow probing of the VIN * tag 'renesas-fixes2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: draak: Fix CVBS input |
|
|
Arnd Bergmann
|
bda090cfeb |
Allwinner arm64 DT changes for 4.21 - round 2
Bluetooth using a Broadcom (now Cypress) chip connected to an UART on the Bananapi M64 is enabled using serdev and the updated bindings for Broadcom Bluetooth. The patch series had been sitting on the mailing lists for a month, and the driver bits were just merged on 2018/12/19. -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlwaESQOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDCxXhAA2DA6aAVAezB2jupaTWW1QoEaMBiBZonSpTkn cF0JvfVvHM0/Hz8wgF/ZcFR1Zw/Vr64B9QyEmLB2WCT/fsfXpMi7QAqqAJ4WNtnh nIaTMQmQEpJn8aZtivdsGmRwKIFn7OGZcBWWn9ZAI5sLffOqOYgSEdNdtFXG0fjc 2NRF3zsUfhEsVt/88R8mfy8b1QQcCTlppF/c3NfIveQiKxKmAgKHymePm/rxELiJ 7FIawzC60FVEZjSAjpwPWskrgmMoQX9tmvCmociX5WXyy3TBZT/f2pJRyB9MojYZ nggEU/8V0rJgaUUTslwePQlqWMiMsdPbBdcAY2UwqhdVtQx51jfTV27CcK6987TQ KoYbFk+fhaLyccYOm/FKD8mSDfcz1n1vjGh1RITW8LrLzetfW/OqnizalMw8YPKg qryOagfKlryeWwFxrvbMUb1VG4LfhHdcAwxk2Crjz3iuDX/vxJY0EXNbDJlK0qGc CouAUDgI6GpZJlIzUmaWQ642f9xu0Y2gD68pd3z8MhX+SuhWmCitzh32pluvMLxC 9pvDw2xOIb6LjvXClKm52S7jI0jQwch1KzIoQrevpsJVOhWxVkQNnhOHTVIcCwDe XDt9QB8ULvDBymef+Q+CZvWXGTc5OoVqABTiIVEhRpEp0oF1LhYJLH8y5gKMHS1L AypbTVs= =Ks3Q -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.21 - round 2 Bluetooth using a Broadcom (now Cypress) chip connected to an UART on the Bananapi M64 is enabled using serdev and the updated bindings for Broadcom Bluetooth. The patch series had been sitting on the mailing lists for a month, and the driver bits were just merged on 2018/12/19. * tag 'sunxi-dt64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Arnd Bergmann
|
f1a6caf73c |
Freescale QSPI device tree cleanup for 4.21:
- It contains a series from Schrempf Frieder that cleans up FSL QSPI
device tree nodes. The current device trees are broken because they
use an inconsistent scheme for assigning the reg properties. It
becomes a problem with ongoing QSPI driver under SPI framework. So
the cleanup is a preparation for new driver landing in the next
cycle.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcFg+pAAoJEFBXWFqHsHzOC3UH/RsA0ysBXsaUF9aNpfmwFpKP
bApnoyo+MhLZSvFqD8eU1K0BhXFOkOmMXMbTle0b3uF7qaknnXEoWTCNz+hJGDsz
fFeOqz7xjyG8Q4U8PT4ImG0OPuFNNGBs1byJKZygxJp/xBlAGMKDp/rRKbM4c8+8
WzoKcWcLqFe+Vau0vuesjcT7J/B3nWvzOWsWX5MHOp10rEWyv9Y4Ct3cAzSMVhAM
1eLQpYegOvUckX0if7BZpj7vSIhDNp/urx6U7D5KGAf9iHK50euMX55LhveiSM8w
CdnnZn2MUXEt2A81Aqb97IOhMsEra47Ffomr1nIV2OGbmDY27HrlUrNSEKNER28=
=I3dR
-----END PGP SIGNATURE-----
Merge tag 'imx-qspi-dt-clean' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale QSPI device tree cleanup for 4.21:
- It contains a series from Schrempf Frieder that cleans up FSL QSPI
device tree nodes. The current device trees are broken because they
use an inconsistent scheme for assigning the reg properties. It
becomes a problem with ongoing QSPI driver under SPI framework. So
the cleanup is a preparation for new driver landing in the next
cycle.
* tag 'imx-qspi-dt-clean' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
arm64: dts: Remove unused properties from FSL QSPI driver nodes
ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
ARM: dts: Remove unused properties from FSL QSPI driver nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
Arnd Bergmann
|
10f9d7fd56 |
AM65x DT changes for 4.21. Includes:
- Pinctrl support - I2C support - ECAP PWM support - Power domain handling for UARTs - McSPI support -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEtQ6szHmfiBT7fujkyvq9MXlQGhEFAlwTdrAQHHQta3Jpc3Rv QHRpLmNvbQAKCRDK+r0xeVAaEc2MEACH5s+PG7jESFPKiHDWcQcUwHibBkby8bDU WaDwEUpwiNfwG4QnBkeDMiiMGr4afUzWtgXIKkA/AttrMVvt7vU+NTuD5K3XT5mo gc4kTZ5DWxo5IJuwUqXKSH9eu/TSoGH8xJam/acGAPdzlyFZfbrpjyOPEKa8rUBO r/KAHBoGPCxoS+ycYQr+HUYG7iicngQOiXhPM412zxAJLtFh+Gfup77EY0EgRgWT PZaqo6j6G/FY0ryQZSDI3h0Zm3oSeHGB9+CRv5WsVBcMGFEef1zSReLBufzMs6on 66h0JeRuxEIhnRAuxZk4CzgCdYHtrSP2cZlxLQ4PG1NJ2bFMX5yvdke6sIzeM5EZ 3fMZDK2+dT0Z+uGBjO0JY05J768sys/ud0KkNx0HjzcZxLQo1d+P6azF6cg78spg xtIzSqii1++KgCIDGnZ4FAmtD1aP2IH2TUbU5OO5pbVFxz3lDf6B2OJBOOjfmWYa 7QcCHV8GFi3TQpT1nLMGUKpi6PFjym7J5e5TWLck5hZVEqq65doBq6dx36Di8cNJ RpGe0OZo/y+8EOqntVafLU67pIuLbIUDWVsRFKFMhx04Dpw9UozCXep8YiQbNOn1 t0c/fED2HfPovWV0Tb/IHgjkU/NCxJJlNm7MMTVVcVumecc/SLSgjMEJzRh7b5bt 1A6++3yLIQ== =wUbp -----END PGP SIGNATURE----- Merge tag 'am654-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt AM65x DT changes for 4.21. Includes: - Pinctrl support - I2C support - ECAP PWM support - Power domain handling for UARTs - McSPI support * tag 'am654-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions arm64: dts: ti: k3-am654: Fix wakeup_uart reg address Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Arnd Bergmann
|
5385c226b6 |
arm64: dts: zynqmp: DT changes for v5.0
- Fix node names - Fix wakeup-source - Wire ddrc - Label gpio controller (PS gpio) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEABECAAYFAlwSeVMACgkQykllyylKDCE1dwCfVyz11cDu9/j5dgSNnDOO9f4A txUAoIrpD9f5nfAb//SEq/GRZn2mXMgw =i6pK -----END PGP SIGNATURE----- Merge tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/dt arm64: dts: zynqmp: DT changes for v5.0 - Fix node names - Fix wakeup-source - Wire ddrc - Label gpio controller (PS gpio) * tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Fix node names which contain "_" arm64: dts: zynqmp: Add missing gpio-controller to ps gpio arm64: dts: zynqmp: Add DDRC node arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property arm64: dts: zynqmp: Use mmc@ instead sdhci@ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Chen-Yu Tsai
|
c266a2b440 |
arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side identifies as BCM43430, while the Bluetooth side identifies as BCM43438. The Bluetooth side is connected to UART1 in a 4 wire configuration. Same as the WiFi side, due to being the same chip and package, DLDO2 provides overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC clock output provides the LPO low power clock at 32.768 kHz. This patch enables Bluetooth on this board, and also adds the missing LPO clock on the WiFi side. There is also a PCM connection for Bluetooth, but this is not covered here. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
|
|
Honghui Zhang
|
41c5c5b0e7 |
arm64: dts: mt7622: Remove un-used property for PCIe
The "num-lanes" property for PCIe is not used, remove it. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> |
|
|
Marek Szyprowski
|
74ebbdda7c |
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
TM2(e) boards have a Broadcom Bluetooth chip connected to 3rd UART port. Add a device tree node describing it and its resources (control GPIO lines and clock). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
|
|
Baruch Siach
|
3bbc9abbfb |
arm64: dts: imx8mq-evk: enable watchdog
The external nWDOG signal connects to the EVK board reset circuit. Tested on the i.MX8MQ EVK rev B3. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Baruch Siach
|
d3a2d72bcf |
arm64: dts: imx8mq: add watchdog devices
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Lucas Stach
|
9079aca4aa |
arm64: add support for i.MX8M EVK board
This is the evaluation kit board for the i.MX8M. The current level of support yields a working console and is able to boot userspace from SD card or Network. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> (v1) Reviewed-by: Rob Herring <robh@kernel.org> (v3) Tested-by: Tested-by: Baruch Siach <baruch@tkos.co.il> (v1) Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Lucas Stach
|
748f908cc8 |
arm64: add basic DTS for i.MX8MQ
This adds the basic DTS for the i.MX8MQ. For now only the following peripherals are supported: - IOMUXC (pin controller) - CCM (clock controller) - GPIO - UART - uSDHC (SD/eMMC controller) - FEC (ethernet controller) - i2c This is enough to get a very basic board support up and running. One known limitation is that the driver for the GPC interrupt controller is still missing, rendering the CPU sleep states unusable as there is nothing waking them up anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Frieder Schrempf
|
30648e9f86 |
arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
We will move the FSL QSPI driver to the SPI framework soon. To prepare and to make sure the full buswidth is used (as it is with the current driver), let's add the right properties. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Frieder Schrempf
|
a0578d2419 |
arm64: dts: Remove unused properties from FSL QSPI driver nodes
The properties 'num-cs' and 'bus-num' were never read by the driver and can be removed. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Vignesh R
|
5da94b5047 |
arm64: dts: ti: k3-am654: Enable main domain McSPI0
Enable McSPI0 of main domain and add DT node for the SPI NOR flash connected to CS0. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
2cd7d393f4 |
arm64: dts: ti: k3-am654: Add McSPI DT nodes
There are 3 instances of McSPI in MCU domain and 4 instances in Main domain. Add DT nodes for all McSPI instances present on AM654 SoC. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
c484fc9572 |
arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
Populate power-domain property for UART nodes, this is required for Linux to enable UART clocks via PM calls. Without this UART instances not initialized by bootloader (like main_uart1) fails to work in Linux. Also, drop current-speed property from main_uart1 and main_uart2 nodes as these UARTs are not initialized before Linux boots up and current speed is unknown. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
e577d79424 |
arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
Enable ECAP PWM which is used for LCD backlight. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
07c663b0ee |
arm64: dts: ti: k3-am65-main: Add ECAP PWM node
Add DT entry for ECAP0 PWM node present in main domain Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
19a1768fc3 |
arm64: dts: ti: k3-am654-base-board: Add I2C nodes
Add DT entries for I2C instances present in AM654 SoC. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Vignesh R
|
3f94859fd7 |
arm64: dts: ti: am654-base-board: Add pinmux for main uart0
Add pinmux for main uart0 that is serves as console on AM654 EVM Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
1d79b4375f |
arm64: dts: ti: k3-am65: Add pinctrl regions
Add pinctrl regions for the main and wkup mmr. The range for main pinctrl region contains a gap at offset 0x2e4, and because of this, the pinctrl range is split into two sections. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> |
|
|
Kamil Konieczny
|
72d7e948fe |
arm64: dts: exynos: Add IMEM clock controller to Exynos5433
Add node for IMEM clock controller, necessary for Security SubSystem (SSS) on Exynos5433. Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
|
|
Laurent Pinchart
|
6f61a2c8f1 |
arm64: dts: renesas: draak: Fix CVBS input
A typo in the adv7180 DT node prevents successful probing of the VIN.
Fix it.
Fixes:
|
|
|
Olof Johansson
|
b125eb0bf4 |
arm64: dts: Amlogic updates for v4.21, round2
Highlights: - fix IRQ trigger type - AXG: enable GPIO IRQs, PHY IRQ, watchdog -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlwRndwACgkQWTcYmtP7 xmW4Yg/+PfUUjs99MtbY2MBZ6mVABpKhlGVUr2cHA9+B3EojSWGCNLtBaL34tGWO Q5GjG75WFSBFNiteT5eAZKGQBe4hVE067BmxHtkpzEHAfXgTnCchQjevIDXVfDgt uHoZ9djbzhe7PVQFuEdma/sqNI7YepzomCLkgSO3jcumjaAdRfJH1iAaGS35b7/W DFSYNEz6l1Bz4I78A9VwRvrNm25ttwyJwLXLDp4d/yUw7bamgkZ01hmOtLdsCr8I yIiOs3CzIsAYerUbbDFRBJVtX2atKXTftOwzlxeaXzYz3pjwC0+iUFswpWmcFQ1u KiVoYX3nD0NlpyC5kok/0XWHYmSEfqxOX3vDyGfbqFfgF/Ax28fvyjyKYXoKgP1b NEM+oKPgfzNlMj74UNWrIMCE96XPvtc4I5O0uZi4GFGD4grgPKkyoRvm4dqRny6o K3AZGDjnwdmBGvEtGVabj46vHSFWJHP44JFLWY85kJ/blBWO1U2Ugmva7e3lKkuP VDsfAEnIDv/Wo2jFErk4+vb6Ea8MfflmnjMmVX4m04l5Bi+h/llIELLDHhoXHSoi KQRMM6X5dTjGbSxQqtHelTcqs2q2Giv6d1TYkaKnN9+JUbTjcpWAU72wh4GaE8fo Jub1MNpMMFZg4HMUrR2ERzu83+O53sSaWQnK1RkudBDRtUUxgoA= =J/po -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2-redo' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt arm64: dts: Amlogic updates for v4.21, round2 Highlights: - fix IRQ trigger type - AXG: enable GPIO IRQs, PHY IRQ, watchdog * tag 'amlogic-dt64-2-redo' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: Fix IRQ trigger type for macirq arm64: dts: meson-axg: Enable GPIO interrupt controller arm64: dts: meson-axg: s400: Enable PHY interrupt arm64: dts: meson: add clock controller clock inputs dt-bindings: clk: meson: add main controller clock input dt-bindings: clk: meson: add ao controller clock inputs arm64: dts: meson-axg: remove alternate xtal arm64: dts: meson-axg: Enable watchdog on Meson AXG SoCs Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
8e22bce990 |
rockpro64 regulator fixes that cause stability issues
-----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlwQxV0QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgQfMCACQoDDe2VXgehKylXYMEYk1JtypTCdkbGDO C4QUhupe7QC3kdFP1dEgy9sluMeZbUjnzXZPOaEUUxF3j2OEqp+ucSrm0mv3e3/d /Z2OO9aVf1+CevIY5cP3ZUZMDA6zRo8VjAhKKyrxSV8Ji5lroApox6obrOseWI9u Avw9dfFF1SXpBEvy7HkhfjGnZz2nXWN48trAksEmXv5Z3r558kSV8LJAmmENtZV2 uIULebOZvQ3Xod65A5zFCMdvjdEjlHrci/9Ci0H6TU6bGHztbNw5XO8nfkXV0yJX rI9Uec640SoZyAnjKHqUHe+abn5ZdGGbLv1Zj6q+DT70/SzIYDAm =Cgwo -----END PGP SIGNATURE----- Merge tag 'v4.20-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes rockpro64 regulator fixes that cause stability issues * tag 'v4.20-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
69c5f266d8 |
Allwinner H3/H5 changes for 4.21
Our usual pull request with the changes shared between the H3 and H5 SoCs. The major changes for this release are: - Addition of the video engine for the H5 - H3 Camera support - New board: Emlid Neutis N5, Mapleboard MP130 -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqJJwAKCRDj7w1vZxhR xTq4AP9SxrPeKDTBD4mKV+PVuJ2qq919M6o+mcxDkCecEMfbagD+JLkt2uGzdpb8 eC6CuieHvJq1y/akfDpRBf0ZZD0/bw0= =yRd0 -----END PGP SIGNATURE----- Merge tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner H3/H5 changes for 4.21 Our usual pull request with the changes shared between the H3 and H5 SoCs. The major changes for this release are: - Addition of the video engine for the H5 - H3 Camera support - New board: Emlid Neutis N5, Mapleboard MP130 * tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: Add Video Engine node ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes arm64: dts: allwinner: h5: Add system-control node with SRAM C1 ARM: dts: sun8i: h3: Fix the system-control register range ARM: dts: sun8i: Add the H3/H5 CSI controller ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130 arm64: dts: allwinner: new board - Emlid Neutis N5 dt-bindings: vendor-prefix: new vendor - Emlid ARM: dts: sun8i-h3: add sy8106a to orange pi plus Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
5cc60b0497 |
Support for the onboard LEDs of the 2 96boards (ficus, rock960),
hdmi output for rockpro64, vpu node on rk3399 and adding the always on 32kHz clock on rk3399-Gru to get a more complete clock tree. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlwQxHMQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgTbOCACON4DSK2x1MpKOOcUMniqPW6Q7KP3o5MJ6 vTgBHdnjTK4LQLrq/B0LBwe4czJSj0uKxdf4bPddZgZSvM1bSdjQ7YHoZNRB5UTx pO4qiiGdLw4CAAMEhaOivN51KBxri+qyUNq/Pyh5lhhyrqjPswDzyA4ou22SaXzY 2BqT8tzHDUmCzXM+0mD+81VMCQax5rezjDFeod6MRT5oSqa4xht7fd4M2Wc5Vqkr B0YfdWvH9ey06vF8bLm2828yA6Gr3uCEHbkVD15PNBGixN0aRSSH6BEThFih+PHq nMkN51wZepnkW3q8wIU6O46UERWE7ySmyZD8ph45IuPtEBXy+aOG =s5pB -----END PGP SIGNATURE----- Merge tag 'v4.21-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Support for the onboard LEDs of the 2 96boards (ficus, rock960), hdmi output for rockpro64, vpu node on rk3399 and adding the always on 32kHz clock on rk3399-Gru to get a more complete clock tree. * tag 'v4.21-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add on-board LED support on rk3399-rock960 arm64: dts: rockchip: Add on-board LED support on rk3399-ficus arm64: dts: rockchip: enable hdmi output on rk3399-rockpro64 arm64: dts: rockchip: add VPU device node for RK3399 arm64: dts: rockchip: Add 32k clk on rk3399-gru Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
ba97d019fc |
UniPhier ARM SoC DT updates for v4.21
- Add bindings for all SoCs/boards of UniPhier platform - Move binding docs to socionext directory - Add all CPUs in cooling maps - Add MIO DMAC nodes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcDpUOAAoJED2LAQed4NsGF5UP+QFPDavs9f3HYR+WJIP9FAk/ yztsRuaygRuJdGwi7xHw1fDdi5N5u4O5olDTiULYDxd+GjlCgbgXB9MKLoVktB0z 81MvrcAsh4d/NvU22R2QadsbeQdGLPRlfyRtwxi0DPzx/LAvUEGA29rFF4fTqYXw 4Lm8UVJl+3yyfl8ysVHhgALmgwYGG/oC9wF/b2Y2/KuO6qm68yxYPX952G3j/AaH HXiWXdQzkYAP7nND8VcN8KBnlV/lJH/HanYVFgWzpV6Kwo7sUbNdMssePZQSsr+J 6Fl36/VtzGTeUlP3tX07Hu4v1i4V09kmG3TLAB6XsIAohpq0g9LRGSrVIohShZGE lNiv2qrXUHUHBq+UoJQDjD/QEvaLTEo3g7S8hWBnPgMyPF8CyMsUYs6EhOuIiinM wtwtAE/EmigvY4xbElJG2WQ/svJmd3qrMazqot8nzPnIKz0FtMmA4jqAyhlmAs3K grH4hG5G0THpX2Netei1mCfb060CMvlabWRFZNjaFk6oxQN4n1J0AUXGeFiHK2Eg FkkVp5PiEg2dn1lhLiUyeauOVzrUKum2CBrLO9war4GLHaUynu4/8ZP+fVgJa3gb DMUh+j4ky/+iZcB5id59OIpALVZvpFk6FfgpFN5d2x4LpRmd1M0oPi+K9FYrmIQb kDx41tyCAx9npRmYN979 =zPKy -----END PGP SIGNATURE----- Merge tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt UniPhier ARM SoC DT updates for v4.21 - Add bindings for all SoCs/boards of UniPhier platform - Move binding docs to socionext directory - Add all CPUs in cooling maps - Add MIO DMAC nodes * tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add MIO DMAC nodes arm64: dts: uniphier: Add all CPUs in cooling maps ARM: dts: uniphier: Add all CPUs in cooling maps dt-bindings: uniphier: move cache-uniphier.txt to vendor directory dt-bindings: uniphier: add bindings for UniPhier SoC family Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
dd980900e2 |
Freescale arm64 device tree update for 4.21:
- Add device tree for LS1028A SoC and NXP FRWY & QDS boards support
based on this SoC.
- Add device tree for LX2160A SoC and NXP QDS & RDB boards support
based on this SoC.
- Add qdma devices for LS1043A and LS1046A SoC.
- Disable PCIe device by default in SoC device tree and let board level
device tree to enable as needed.
- Drop compatible string "snps,dw-pcie" from LayerScape PCIe devices to
avoid incorrect matching.
- Move fsl-mc device as a child node of soc node, and add missing
dma-ranges property for LS1088A SoC.
- Update LayerScape SoCs' cooling maps to include all devices affected
by individual trip points.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDgwJAAoJEFBXWFqHsHzObhIH/0knVFbw3ubCvjxdYh3wKkKp
B7D39BTQZUwJXNc9To79TKsnFbCW9QucofRKeZN6Ln/qIkvPrlmyQ7bafaz6Lah4
i++bNIyDtHUQ0ZBB/37vl5n+KRbX7CnRsGwEiZnOCBXdKJcsaMYBXKh7q3o4vFRy
PgacoiipkfYVSosQmxoC/b4PUeYCWa8Mkh0p6X+1aadI1PT58SZo374/NDAiu4aG
ao2FJgWCyYOCXRVPaDS2XDOUU3cogMJSk3M9c3xtEDI2yfzlKQ1TkoyYYG3WwcH7
5aEqGd5Iky27G2S8p16zoqyhHiC4Vq8fsWRRAnF/mVorNtpJC7BdI86VIzvKQlQ=
=sarB
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.21:
- Add device tree for LS1028A SoC and NXP FRWY & QDS boards support
based on this SoC.
- Add device tree for LX2160A SoC and NXP QDS & RDB boards support
based on this SoC.
- Add qdma devices for LS1043A and LS1046A SoC.
- Disable PCIe device by default in SoC device tree and let board level
device tree to enable as needed.
- Drop compatible string "snps,dw-pcie" from LayerScape PCIe devices to
avoid incorrect matching.
- Move fsl-mc device as a child node of soc node, and add missing
dma-ranges property for LS1088A SoC.
- Update LayerScape SoCs' cooling maps to include all devices affected
by individual trip points.
* tag 'imx-dt64-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls1046a: add qdma device tree nodes
arm64: dts: ls1043a: add qdma device tree nodes
arm64: dts: ls1088a: Add missing dma-ranges property
arm64: dts: ls1088a: Move fsl-mc node
arm64: dts: fsl: Add all CPUs in cooling maps
arm64: dts: Add support for NXP LS1028A SoC
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
arm64: dts: fsl: Add the status property disable PCIe
arm64: dts: ls1012a: Add FRWY-LS1012A board support
arm64: dts: add LX2160AQDS board support
arm64: dts: add LX2160ARDB board support
arm64: dts: add QorIQ LX2160A SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Olof Johansson
|
457a728d80 |
mt8173: add node for the command queue device
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlwNjGcXHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00MMzg/+KeoHkvcyFg3Kd5ZHQSx/idyS iEoxjLJzFB+KqAXmVdbmJKstNcvusk+/3KNaG+g9vfz8DAwX2Syr/dZM0wFYuTrX lph2jzSriwkRj7q6XJF2xipA7lqzM4L5fRJvzwyO7W7pvbjelyjC0HyKY77Y61qN a6CXmZlwvD2wxzisa9rKQDxsFPHTdRPQUvoRI4HclI6JJDUY1vUi6QrlKX0nQGRa i9Tw5s+kYsPUmNFV9yau+N+jc3nhyelFkt3dwhvrBlMVLpkwLzWsLqxZefvD+1HH niIli6KUMJTKZYtN9QPLsMaUZCWQD3UmlBtCav5jMOgadJhyqR94bIW3Z+oYb9Yd b2FCO7igXKhCnVMMIkluirDuYIUZ4R3HYPAI4QX+uTpzvonylSuvZn70S+BDX064 kNe8ujcRVtOhLpS8V9eOSvfauUmaRF8+IiujcREwBMNXpzGUghHNC++FwNHuBsXn bPtlFRFX+DjnVnULVLvRG42R/y1BkDnGL2Tn3PsD7cTkTWJa7lasOZFidIPl+QGq 83Kf2vsOnvGTgh/paSZg1CWgQETjFIoufuB9XrjnjartEtZnHGh5uqD6uxRdYqvw E8Sc1frhu3bq2JIOgVq/ifYJpHLLxw4gndclwS+Lw+SEklMl/+HXvcOWlepGU7LJ zwNFg7ZYSZuI+Rp5RwQ= =Mneu -----END PGP SIGNATURE----- Merge tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt mt8173: add node for the command queue device * tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: Add GCE node Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
333524bcd3 |
Samsung DTS ARM64 changes for v4.21
1. Update DWC3 hardware modules to Exynos5433 specific variant. 2. Update cooling maps to include all CPU devices in multiple DTS files. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAlwM920QHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD14IfD/4iMXDbb3VKcQyKFjepxhxtXsQ/cgOuDepG enamjIVBkXFocbldVtEiKb2KM0j278It+8Q/vT5gvHESc/UL4nOJsmLUcaaIG6Jf yqk3QDM3IzvKimT/UQFK871D6yMOYkLilaX9QL8RwdEtaBIEQNpT7OJORVjcxwbK MXDyfO+B6qjcT4puulPv37/RWQEajN8qtTEwAlshvRoD8VPqIwU0sLKuMbKrU0wL J4SZU6jPejwsB1xHJRE+Qq8aJVFCSdSd1vKYRObYfb1q0pBKg6npcEzEURl/G1OB wcRfbT1Sg9u38a+qTSVMaEAgqfISB/mfeZbjJ/wJ/QaokAXoAxHhTX6M9BtWBAv2 iSRa9RR9I2dN7ZLeuq7SFxLsrglpnxundGUCg9ahmGLcnc+mUfM+ghNYYAIjsgLb hUE8purXZMUJssvkOp6KjN9D5HW7nLvghNZ5ivQ99qIrPAwFZsZLIbcyrFKN8zCK oa9gtSbDSOxOB43Uqh/93c7/1sCgJSuQgQnvDbV00ttQrApgHBFRBssaU9ByZz12 lBr7cAfEHAUrN+qvioOCWGp8jGBDbIoLeHm0KAV298TkLzVj1fnewrbcZjjew/+K c398nGabl8AToLi6AHepCw6KPz8QWVX/mphw8hiUIWHMQfclSWMPLqEbdjdGHKqU 8LXDEUQZaQ== =vgas -----END PGP SIGNATURE----- Merge tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DTS ARM64 changes for v4.21 1. Update DWC3 hardware modules to Exynos5433 specific variant. 2. Update cooling maps to include all CPU devices in multiple DTS files. * tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add all CPUs in cooling maps arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
d4dcfc7c93 |
mvebu dt64 for 4.21 (part 1)
- complete the description of the clearfog-gt-8k board (Armada 8040
based board)
- declare eMMC on espressobin (Armada 3720 based board) which still
need to be enable by the bootloader as it is not present on all the
board.
- add a new version of the Macchiatobin (Armada 8040 based board): the
Single Shot (without the 10G 3310 PHYs).
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXAuF0wAKCRALBhiOFHI7
1Z0ZAJ41K0DWU/kNuQ8ZKTWhUFIVNNVxagCgnumdAUE7jxpgXu+WaVMNMXSJi+A=
=9Qkr
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.21 (part 1)
- complete the description of the clearfog-gt-8k board (Armada 8040
based board)
- declare eMMC on espressobin (Armada 3720 based board) which still
need to be enable by the bootloader as it is not present on all the
board.
- add a new version of the Macchiatobin (Armada 8040 based board): the
Single Shot (without the 10G 3310 PHYs).
* tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB
arm64: dts: add support for Macchiatobin Single Shot board
arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definition
arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USB
arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal
arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarity
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Olof Johansson
|
e7828317a4 |
Qualcomm ARM64 Updates for v4.21 Part 2
* Switch to use dwc3-qcom glue driver on MSM8996 * Fix issue with xo clk name on MSM8998 * Add cooling maps on MSM8916 * Add UART nodes on SDM845 * Add camera subsystem support on MSM8996 and MSM8916 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcCv8oAAoJEFKiBbHx2RXVPU8P/RdMSnKQp4hWtXyi/n0x8A7W 221Q/VQNzv4HjujdBP/+QsDBErrkb2JKUvqS5VPYqh1MPHnmbXuv185Ccr9m6L+D YMNpZoMe1bWhUmdQnSS95DSeLzIpCS8sSyczWUdQlm1faVoFZ7A6XyGdFUKVCBqf 6x3egZb8gBDKfUS1KnzEo8bhWxltdzK7TOmjZQJzZIqFmQ5eb42YV+mBhRAwj6nt 1wi93eof+f7DOSVOtBebyiDiWAKVcuDAZgMDe0cDVJzxgNx9ODAxheF1DPM9P2XK izak3TRdlEgZLMUuH65mlqxR3FGqMoKpPrl+WYrQIFO6NdgUiB308TJDPW85B9eE 1ZSZOFr059K4btP8kG27PBKxISKuLsiFW348zP2Cx1QOquQUX/R2t7yfsShAABQX S3MpUvHzGwfCuHih+SNSmk3cd10C65efNR9UN4MwbKtFqVRfiWRSKWGgWMQNkOQ0 ga6NKK2OfTqGeJ5MYnqM0Ke25+ACkdW1UMhGaFg3IPqTwdZZ2ClKDq2I8AvqnZ1G k656Z4KGud8RifPBeRARqzRe8ZCxomns7f66IAyCP6xO/pxC+JcjBL0GY3bBDNsE QA4kfrLQ27LTDvICEOdUsshUoiDBg+keEttbLI0QCh6GTyZKL8yqDp8xICp1AEvq InAboFK/dxsqdmRNkgAh =EMri -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm ARM64 Updates for v4.21 Part 2 * Switch to use dwc3-qcom glue driver on MSM8996 * Fix issue with xo clk name on MSM8998 * Add cooling maps on MSM8916 * Add UART nodes on SDM845 * Add camera subsystem support on MSM8996 and MSM8916 * tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8996: Use dwc3-qcom glue driver for USB arm64: dts: qcom: msm8998: Fixup clock to use xo_board arm64: dts: qcom: sdm845: Add UART nodes arm64: dts: qcom: msm8996: Add CAMSS support arm64: dts: qcom: msm8996: Add VFE SMMU node arm64: dts: qcom: Add pinctrls for camera sensors arm64: dts: qcom: Add Camera Control Interface pinctrls arm64: dts: qcom: msm8916: Add CAMSS support arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank arm64: dts: msm8916: Add all CPUs in cooling maps Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
ee261c7e82 |
Allwinner arm64 DT changes for 4.21
Our usual set of arm64 DT changes, with the biggest additions being: - Support for the video decoding engine in the A64 - Support for the audio codec in the A64 - USB Support in the H6 - HDMI Support in the H6 - EMAC Support in the H6 - New board: Orange Pi Lite2 -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqGvQAKCRDj7w1vZxhR xeObAQDZGMVjFjiWlC0jYjBQoCHMf1dlu6iPd4qe8h3GS1XUVQD/c8SJaMj5oLX1 HKjtqQD+sJRUQdcWlwAsqEEKyKUhfQs= =aAr3 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.21 Our usual set of arm64 DT changes, with the biggest additions being: - Support for the video decoding engine in the A64 - Support for the audio codec in the A64 - USB Support in the H6 - HDMI Support in the H6 - EMAC Support in the H6 - New board: Orange Pi Lite2 * tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits) arm64: dts: allwinner: a64: Fix up RTC device node and clock references arm64: dts: allwinner: a64: Add Video Engine node arm64: dts: allwinner: a64: Add support for the SRAM C1 section arm64: dts: allwinner: a64: pinebook: enable power supplies arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies arm64: dts: allwinner: axp803: add AC and battery power supplies arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec arm64: dts: allwinner: a64: enable sound on Pinebook arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine arm64: dts: allwinner: a64: add nodes necessary for analog sound support arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator arm64: dts: allwinner: h6: fix EMAC compatible string sequence arm64: dts: allwinner: a64: Add device node for Mali-400 GPU dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali arm64: dts: allwinner: h6: enable USB2 on Pine H64 arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64 arm64: dts: allwinner: h6: add USB2-related device nodes arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board ... Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
2c94db389b |
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqFhwAKCRDj7w1vZxhR
xcQzAQDJu0dPrs3SQlWdDhOa0iFVp/7gmN4iRMxMScIIjrRUgAEAzmhUjQNNTNLc
OPF9XzMdT12rs2SAbk2XXtWH1hN8KQA=
=vSCG
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
ARM: dts: sunxi: Fix PMU compatible strings
ARM: dts: sun8i: r40: Add RTC device node
ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
ARM: dts: sun8i: a23/a33: Fix up RTC device node
ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
ARM: dts: suniv: Add device tree for Lichee Pi Nano
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: dts: axp81x: add AC power supply subnode
ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Manivannan Sadhasivam
|
953d9f3903 |
arm64: dts: rockchip: Add on-board LED support on rk3399-rock960
Add on-board LED support for Rock960 board based on the following standard used by rest of the 96Boards: green:user1 default-trigger: heartbeat green:user2 default-trigger: mmc0/disk-activity(onboard-storage) green:user3 default-trigger: mmc1 (SD-card) green:user4 default-trigger: none, panic-indicator yellow:wlan default-trigger: phy0tx blue:bt default-trigger: hci0-power Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Manivannan Sadhasivam
|
ba0abee70a |
arm64: dts: rockchip: Add on-board LED support on rk3399-ficus
Add on-board LED support for Ficus board based on the following standard used by other 96Boards: red:user1 default-trigger: heartbeat red:user2 default-trigger: mmc0/disk-activity (onboard-storage) red:user3 default-trigger: mmc1 (SD-card) red:user4 default-trigger: none, panic-indicator red:wlan default-trigger: phy0tx red:bt default-trigger: hci0-power Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Olof Johansson
|
91eac9139e |
arm64: tegra: Device tree change for v4.21-rc1
These changes add a bunch of features for Tegra194 and Tegra186, such as wake events, on-die RTC, temperature sensors, HDA for audio over HDMI and fan support on Jetson Xavier to allow cooling of the device. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlwKf7oTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zofceD/43trVxXm9WMt/mTWfVZuhJNmgnt8x2 38m8cM09nw/E4sBMUfNwyUPo18swxZ1AEmluSkw1Rc6kzEU2S3xMv2lqJX70fyZE nl3Rt9NUu6YwWaackGZuqq4LWa6BhnMxuNPuEvapMIoFIpFT+wT+12M7CxK99Z2I 0Du3Q0F/7v4Q9jvjMrdyerd/Jd43HkeysFR4hLJjaBkExVRfsntR7wb2P7kMWlRL A3rXhB5L9ZAze54z3jJyEayx8Eiq7qCh3iuKYZ3VeuOKcFbSUy4MjAg1ZoKrir2G 6YbCmSURnnsj4A4OJD+P9g/0sWjE+9QWnnxeN5bFEcA4SnSLJT3F65z9G19p65/k Y2CDl7LAMFJN+1iYxWhQOfVw+LUGycs0eTrpNxoSSzZ/MSntexCTgFox1SCqfF/x fP9zmZGoZIQ/G9H+trhT1eRiE0l25gJjJGIcxRQTYtgVicK1YpsF8oBzl6k8sikI XpK0dO6kCsyLjfqw3VKoR3ZTLl4YJq6qQObaxtoFz94QaCudRcJ42AaHjdCOGhSP IXlp4/YFih9z2Uw58e09YcM0TawcAXS0h2twKMif7ktMBcO2Eo79c3cEapCgbo3e MN7yyoscNrIbl3PKhdj1J5VTU0li2EKZXfXPQZAf0NSPXJ9IZN0KWP5E23FgrpJB 1+rrxD/8IhxoLg== =CDXO -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt arm64: tegra: Device tree change for v4.21-rc1 These changes add a bunch of features for Tegra194 and Tegra186, such as wake events, on-die RTC, temperature sensors, HDA for audio over HDMI and fan support on Jetson Xavier to allow cooling of the device. * tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits) arm64: tegra: Set reg property for display-hub on Tegra194 arm64: tegra: Set reg property for display-hub on Tegra186 arm64: dts: tegra186: Enable IOMMU for SDHCI arm64: tegra: Enable HDA controller on Jetson TX1 arm64: tegra: Add CEC controller on Tegra194 arm64: tegra: Enable HDA on Jetson Xavier arm64: tegra: Add HDA controller on Tegra194 arm64: tegra: Add CEC controller on Tegra186 arm64: tegra: Enable HDA on Jetson TX2 arm64: tegra: Add HDA controller on Tegra186 arm64: tegra: Add temperature sensor on P2888 arm64: tegra: Add gpio-keys on Jetson Xavier arm64: tegra: Add AON GPIO controller on Tegra194 arm64: tegra: p2888: Enable on-die RTC arm64: tegra: Add RTC support on Tegra194 arm64: tegra: Enable PMC wake events on Tegra194 arm64: tegra: p3310: Enable on-die RTC arm64: tegra: Add RTC support on Tegra186 arm64: tegra: Enable PMC wake events on Tegra186 arm64: tegra: Fix power key interrupt type on Jetson TX2 ... Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
e2bc560635 |
Second Round of Renesas ARM64 Based SoC DT Updates for v4.21
* R-Car D3 (r8a77995) SoC based Draak board - Add the backlight device for the LVDS1 output * R-Car H3 (r8a7795) ES1.0 SoC - Add missing power domains to IPMMU nodes * R-Car M3-N (r8a77965) SoC - Remove non-existent IPMMU-IR -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlwJf9UACgkQ189kaWo3 T773yRAAsSxQQcqYI9fnEkVtrsx7DbD6PU1/KPMCSs4pvjSZZcfOl3thU4Lvdd/d v2kTFxWPNrNK/Tl6D6+krsW1zrgk2cs3592iHNcF3D+Hk4QL4RR6ZxJD22vyRt14 5duTp3qzPb8HJwLFehBPXBYIW66eS75EXBDV2ujohV0giBmc7PYaQ7PGYrzXCJS4 lo6Rz5rb0Etl6CXs7ZcA7EylqNpN9EnfuL5J3Xz0XTjmdbo/qTje/unOzs65jdfV wB3Hy/TNfpIn0YxqhLIKtJm+n/GMiJ2/2xqMmyMIvo5e4py0ljHFjnY0zJmG3IM0 ayemUjZ61f+nkEXv7vZ2i6G2NaUwqr3HM760nGTNy7G3M+f4iWzw1/r0rtP1tKxR G0yHcnYDaLjijLUvOp3wNAsgLiU/5a73wUQPE5130oJD8Cwqt3SsQiyBrautq8dd FkTCHyaThMGGxbJGEJ1wDNXba6uPY64nrADEFH6+M5oel+fkJk3DkOyye6BT8yKP sA8bIT6J3bx/HYIXqaP5hKuiozMw9Jm93RCe/c/Jw7SrFZVBggCCIdowSkJabhtD FhgXIz9MIwZ/PFhiBTjg681JLK4iRodUmGsXIaMFpkRbtnw4pScV3FOlglVrJPjb +gCsGG1+g9NcxQIabxBeiVHZA/FF/ULIzPMRVCOa2KVpvqRluEA= =dL/P -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM64 Based SoC DT Updates for v4.21 * R-Car D3 (r8a77995) SoC based Draak board - Add the backlight device for the LVDS1 output * R-Car H3 (r8a7795) ES1.0 SoC - Add missing power domains to IPMMU nodes * R-Car M3-N (r8a77965) SoC - Remove non-existent IPMMU-IR * tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77995: draak: Add backlight arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Linus Torvalds
|
1dffab5e98 |
ARM: SoC fixes
The usual batch; most of them are DT tweaks to fix misdescribed
hardware. Beyond that:
- A bugfix for MMP2 CPU detection, it's been there quite a while but
makes sense to fix now anyway.
- Some power management tweaks;
+ disabling of CPU idle power state on Marvell Armada 7K/8K (Macchiatobin et al)
+ Increase of minimum voltage on BananaPi M3
+ Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX
- A couple of MAINTAINER updates; MMP has a new volunteer to look after
it, and Mediatek adds a few keywords, IRC channel and wiki URL.
-----BEGIN PGP SIGNATURE-----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=gJxg
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The usual batch; most of them are DT tweaks to fix misdescribed
hardware. Beyond that:
- A bugfix for MMP2 CPU detection, it's been there quite a while but
makes sense to fix now anyway.
- Some power management tweaks:
+ disabling of CPU idle power state on Marvell Armada 7K/8K
(Macchiatobin et al)
+ Increase of minimum voltage on BananaPi M3
+ Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX
- A couple of MAINTAINER updates:
+ MMP has a new volunteer to look after it
+ Mediatek adds a few keywords, IRC channel and wiki URL"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
ARM: imx: update the cpu power up timing setting on i.mx6sx
Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
ARM: dts: imx7d-pico: Describe the Wifi clock
ARM: dts: realview: Fix some more duplicate regulator nodes
MAINTAINERS: update entry for MMP platform
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
MAINTAINERS: mediatek: Update SoC entry
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
arm64: dts: mt7622: Drop the general purpose timer node
arm64: dts: mt7622: fix no more console output on BPI-R64 board
arm64: dts: mt7622: fix no more console output on rfb1
ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
|
|
|
Viresh Kumar
|
072ae88ad2 |
arm64: dts: uniphier: Add all CPUs in cooling maps
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Greg Kroah-Hartman
|
c4aa8b2a8b |
Merge 4.20-rc6 into char-misc-next
This should resolve the hv driver merge conflict. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |