Commit Graph

534108 Commits

Author SHA1 Message Date
Dong Aisheng 4800e87a2e mmc: sdhci-esdhc-imx: fix cd regression for dt platform
Current card detect probe process is that when driver finds a valid
ESDHC_CD_GPIO, it will clear the quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION
which is set by default for all esdhc/usdhc controllers.
Then host driver will know there's a valid card detect function.

Commit 8d86e4fccc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()")
breaks GPIO CD function for dt platform that it will return directly
when find ESDHC_CD_GPIO for dt platform which result in the later wrongly
to keep SDHCI_QUIRK_BROKEN_CARD_DETECTION for all dt platforms.
Then MMC_CAP_NEEDS_POLL will be used instead even there's a valid
GPIO card detect.

This patch adds back this function and follows the original approach to
clear the quirk if find an valid CD GPIO for dt platforms.

Fixes: 8d86e4fccc ("mmc: sdhci-esdhc-imx: Call mmc_of_parse()")
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:37 +02:00
Dong Aisheng 1cd55947f2 dts: imx7: fix sd card gpio polarity specified in device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:36 +02:00
Dong Aisheng cf75eb15be dts: imx25: fix sd card gpio polarity specified in device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:36 +02:00
Dong Aisheng 89c1a8cf63 dts: imx6: fix sd card gpio polarity specified in device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:35 +02:00
Dong Aisheng 94d7694685 dts: imx53: fix sd card gpio polarity specified in device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:35 +02:00
Dong Aisheng aca45c0e95 dts: imx51: fix sd card gpio polarity specified in device tree
cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:34 +02:00
Joakim Tjernlund 8e91125ff3 mmc: sdhci-esdhc: Make 8BIT bus work
Support for 8BIT bus with was added some time ago to sdhci-esdhc but
then missed to remove the 8BIT from the reserved bit mask which made
8BIT non functional.

Fixes: 66b50a0099 ("mmc: esdhc: Add support for 8-bit bus width and..")
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:34 +02:00
Tomas Winkler 9098f84cce mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler,
let's add it.

Fixes: add710eaa8 ("mmc: boot partition ro lock support")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:34 +02:00
Geert Uytterhoeven c2b22fff71 mmc: MMC_MTK should depend on HAS_DMA
If NO_DMA=y:

    ERROR: "dma_alloc_coherent" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_unmap_sg" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_map_sg" [drivers/mmc/host/mtk-sd.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/mmc/host/mtk-sd.ko] undefined!

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:33 +02:00
Peng Fan 7ac020366b mmc: sdhci check parameters before call dma_free_coherent
We should not call dma_free_coherent if host->adma_table is NULL,
otherwise may trigger panic.

Fixes: d1e49f77d7 ("mmc: sdhci: convert ADMA descriptors to a...")
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:27 +02:00
Vignesh R 5027cd1e32 mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
Sometimes BADA, DEB or CEB error interrupts occur when sd card is
unplugged during data transfer. These interrupts are currently ignored
by the interrupt handler. But, this results in card not being
recognised on subsequent insertion. This is because mmcqd is waiting
forever for the data transfer(for which error occurred) to complete.
Fix this, by reporting BADA, DEB, CEB errors to mmc-core as -EILSEQ, so
that the core can do appropriate handling.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:21 +02:00
Kishon Vijay Abraham I 408806f740 mmc: omap_hsmmc: Fix DTO and DCRC handling
DTO/DCRC errors were not being informed to the mmc core since
commit ae4bf788ee ("mmc: omap_hsmmc: consolidate error report handling of
HSMMC IRQ"). This commit made sure 'end_trans' is never set on DTO/DCRC
errors. This is because after this commit 'host->data' is checked after
it has been cleared to NULL by omap_hsmmc_dma_cleanup().

Because 'end_trans' is never set, omap_hsmmc_xfer_done() is never invoked
making core layer not to be aware of DTO/DCRC errors. Because of this
any command invoked after DTO/DCRC error leads to a hang.

Fix this by checking for 'host->data' before it is actually cleared.

Fixes: ae4bf788ee ("mmc: omap_hsmmc: consolidate error report handling of
HSMMC IRQ")

CC: stable@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:13 +02:00
Dave Airlie 02bbc4dc68 Merge tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91 into drm-fixes
single hlcdc fix.

* tag 'drm-atmel-hlcdc/fixes-for-4.2' of https://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: fix vblank initial state
2015-07-24 14:27:44 +10:00
NeilBrown e6030cb06c md/raid5: clear R5_NeedReplace when no longer needed.
This flag is currently never cleared, which can in rare cases
trigger a warn-on if it is still set but the block isn't
InSync.

So clear it when it isn't need, which includes if the replacement
device has failed.

Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:38:04 +10:00
Goldwyn Rodrigues 90382ed9af Fix read-balancing during node failure
During a node failure, We need to suspend read balancing so that the
reads are directed to the first device and stale data is not read.
Suspending writes is not required because these would be recorded and
synced eventually.

A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep().
area_resyncing() will respond true for the entire devices if this
flag is set and the request type is READ. The flag is cleared
in recover_done().

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reported-By: David Teigland <teigland@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:37:59 +10:00
Goldwyn Rodrigues 33e38ac688 md-cluster: fix bitmap sub-offset in bitmap_read_sb
bitmap_read_sb is modifying mddev->bitmap_info.offset. This works for
the first bitmap read. However, when multiple bitmaps need to be opened
by the same node, it ends up corrupting the offset. Fix it by using a
local variable.

Also, bitmap_read_sb is not required in bitmap_copy_from_slot since
it is called in bitmap_create. Remove bitmap_read_sb().

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:37:55 +10:00
Goldwyn Rodrigues b0c26a79d6 md: Return error if request_module fails and returns positive value
request_module() can return 256 (process exited) in some cases,
which is not as specified in the documentation before the
request_module() definition. Convert the error to -ENOENT.

The positive error number results in bitmap_create() returning
a value that is meant to be an error but doesn't look like one,
so it is dereferenced as a point and causes a crash.

(not needed for stable as this is "experimental" code)
Fixes: edb39c9ded ("Introduce md_cluster_operations to handle cluster functions")
Signed-off-By: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:37:51 +10:00
Goldwyn Rodrigues f735727319 md: Skip cluster setup in case of error while reading bitmap
If the bitmap read fails, the error code set is -EINVAL. However,
we don't check for errors and go ahead with cluster_setup.
Skip the cluster setup in case of error.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:37:48 +10:00
NeilBrown 34cab6f420 md/raid1: fix test for 'was read error from last working device'.
When we get a read error from the last working device, we don't
try to repair it, and don't fail the device.  We simple report a
read error to the caller.

However the current test for 'is this the last working device' is
wrong.
When there is only one fully working device, it assumes that a
non-faulty device is that device.  However a spare which is rebuilding
would be non-faulty but so not the only working device.

So change the test from "!Faulty" to "In_sync".  If ->degraded says
there is only one fully working device and this device is in_sync,
this must be the one.

This bug has existed since we allowed read_balance to read from
a recovering spare in v3.0

Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Fixes: 76073054c9 ("md/raid1: clean up read_balance.")
Cc: stable@vger.kernel.org (v3.0+)
Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24 13:37:21 +10:00
Dave Airlie b37b425f2e Merge tag 'topic/drm-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Regression fix for systemd getting confused about unknown connector state
after resume. Just stop setting the state to unknown, turned out to be a
silly idea anyway. What drivers imo really should do (and i915 still does
that) is forcing a full reprobe on resume to make sure connector changes
while suspended are caught. Most drivers seem to get this wrong. Otoh it
took us years to get fixes merged where some probe races resulted in
eating uevents, I guess userspace expectations for reliable hpd are just
really low :(

* tag 'topic/drm-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  drm: Stop resetting connector state to unknown
2015-07-24 11:52:35 +10:00
Dave Airlie 4db9a82f1e Merge tag 'drm-intel-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-fixes
arb_timer kernel side fix from Chris.

* tag 'drm-intel-fixes-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Use two 32bit reads for select 64bit REG_READ ioctls
2015-07-24 11:52:09 +10:00
Dave Airlie 762043aa77 Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Some amdgpu fixes.

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels
  drm/amdgpu/cz: implement voltage validation properly
  drm/amdgpu: add VCE harvesting instance query
  drm/amdgpu: implement VCE 3.0 harvesting support (v4)
  drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC
  drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC
2015-07-24 11:51:18 +10:00
Alexandre Courbot f135b978c2 drm/ttm: recognize ARM64 arch in ioprot handler
Return proper pgprot for ARM64. This is required for objects like
Nouveau fences to be mapped with expected coherency.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-07-24 11:51:14 +10:00
Peter Hurley 61e86cc90a tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection()
Pasting text with gpm on a VC produced warning [1]. Reset task state
to TASK_RUNNING in the paste_selection() loop, if the loop did not
sleep.

[1]
WARNING: CPU: 6 PID: 1960 at /home/peter/src/kernels/mainline/kernel/sched/core.c:7286 __might_sleep+0x7f/0x90()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8151805e>] paste_selection+0x9e/0x1a0
Modules linked in: btrfs xor raid6_pq ufs qnx4 hfsplus hfs minix ntfs msdos jfs xfs libcrc32c .....
CPU: 6 PID: 1960 Comm: gpm Not tainted 4.1.0-rc7+tty-xeon+debug #rc7+tty
Hardware name: Dell Inc. Precision WorkStation T5400  /0RW203, BIOS A11 04/30/2012
 ffffffff81c9c0a0 ffff8802b0fd3ac8 ffffffff8185778a 0000000000000001
 ffff8802b0fd3b18 ffff8802b0fd3b08 ffffffff8108039a ffffffff82ae8510
 ffffffff81c9ce00 0000000000000015 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff8185778a>] dump_stack+0x4f/0x7b
 [<ffffffff8108039a>] warn_slowpath_common+0x8a/0xc0
 [<ffffffff81080416>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff810ddced>] ? __lock_acquire+0xe2d/0x13a0
 [<ffffffff8151805e>] ? paste_selection+0x9e/0x1a0
 [<ffffffff8151805e>] ? paste_selection+0x9e/0x1a0
 [<ffffffff810ad4ff>] __might_sleep+0x7f/0x90
 [<ffffffff8185f76a>] down_read+0x2a/0xa0
 [<ffffffff810bb1d8>] ? sched_clock_cpu+0xb8/0xe0
 [<ffffffff8150d1dc>] n_tty_receive_buf_common+0x4c/0xba0
 [<ffffffff810dc875>] ? mark_held_locks+0x75/0xa0
 [<ffffffff81861c95>] ? _raw_spin_unlock_irqrestore+0x65/0x80
 [<ffffffff810b49a1>] ? get_parent_ip+0x11/0x50
 [<ffffffff8150dd44>] n_tty_receive_buf2+0x14/0x20
 [<ffffffff81518117>] paste_selection+0x157/0x1a0
 [<ffffffff810b77b0>] ? wake_up_state+0x20/0x20
 [<ffffffff815203f8>] tioclinux+0xb8/0x2c0
 [<ffffffff81515bfe>] vt_ioctl+0xaee/0x11a0
 [<ffffffff810baf75>] ? sched_clock_local+0x25/0x90
 [<ffffffff810bbe11>] ? vtime_account_user+0x91/0xa0
 [<ffffffff8150810c>] tty_ioctl+0x20c/0xe20
 [<ffffffff810bbe11>] ? vtime_account_user+0x91/0xa0
 [<ffffffff810b49a1>] ? get_parent_ip+0x11/0x50
 [<ffffffff810b4a69>] ? preempt_count_sub+0x49/0x50
 [<ffffffff811ab71c>] ? context_tracking_exit+0x5c/0x290
 [<ffffffff811ab71c>] ? context_tracking_exit+0x5c/0x290
 [<ffffffff81248b98>] do_vfs_ioctl+0x318/0x570
 [<ffffffff810dca8d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff810dc9b5>] ? trace_hardirqs_on_caller+0x115/0x1e0
 [<ffffffff81254acc>] ? __fget_light+0x6c/0xa0
 [<ffffffff81248e71>] SyS_ioctl+0x81/0xa0
 [<ffffffff81862832>] system_call_fastpath+0x16/0x7a

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 18:08:29 -07:00
Peter Hurley e144c58cad serial: core: Fix crashes while echoing when closing
While closing, new rx data may be received after the input buffers
have been flushed but before stop_rx() halts receiving [1]. The
new data might not be processed by flush_to_ldisc() until after
uart_shutdown() and normal input processing is re-enabled (ie.,
tty->closing = 0). The race is outlined below:

CPU 0                         | CPU 1
                              |
uart_close()                  |
   tty_port_close_start()     |
      tty->closing = 1        |
      tty_ldisc_flush()       |
                              | => IRQ
                              |   while (LSR & data ready)
                              |      uart_insert_char()
                              |   tty_flip_buffer_push()
                              | <= EOI
   stop_rx()                  |   .
   uart_shutdown()            |   .
      free xmit.buf           |   .
   tty_port_tty_set(NULL)     |   .
   tty->closing = 0           |   .
                              | flush_to_ldisc()
                              |   n_tty_receive_buf_common()
                              |      __receive_buf()
                              |         ...
                              |         commit_echoes()
                              |            uart_flush_chars()
                              |               __uart_start()
                              | ** OOPS on port.tty deref **
   tty_ldisc_flush()          |

Input processing must be prevented from echoing (tty->closing = 1)
until _after_ the input buffers have been flushed again at the end
of uart_close().

[1] In fact, some input may actually be buffered _after_ stop_rx()
since the rx interrupt may have already triggered but not yet been
handled when stop_rx() disables rx interrupts.

Fixes: 2e75891083 ("serial: core: Flush ldisc after dropping port
mutex in uart_close()")
Reported-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 18:08:28 -07:00
Peter Hurley 7525a9901b m32r: Add ioreadXX/iowriteXX big-endian mmio accessors
commit c627f2ceb6 ("serial: 8250: Add support for big-endian MMIO accesses")
added support for 32-bit big-endian mmio to the 8250 driver. Support for
ioreadXXbe/iowriteXXbe io accessors was missing from m32r arch, which caused
build errors.

Add trivial macro mmio accessors.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 18:08:28 -07:00
David Jander 907eda32a3 Revert "serial: imx: initialized DMA w/o HW flow enabled"
This reverts commit 068500e08d.

According to some tests, SDMA support is broken at least for i.MX6 without
HW flow control. Different forms of data-corruption appear either with
the ROM firmware for the SDMA controller as well as when loading Freescale
provided SDMA firmware versions 1.1 or 3.1.

Signed-off-by: David Jander <david@protonic.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 17:40:14 -07:00
Bo Svangård dec273ecc1 sc16is7xx: fix FIFO address of secondary UART
Calls to regmap_raw_read/write needed register rewrite in a
similar way as function calls to regmap_read/write already had.
This enables reading/writing the serial datastream to the device.

Signed-off-by: Bo Svangård <bo.svangard@embeddedart.se>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:32:32 -07:00
Jakub Kicinski 32aa6339d9 sc16is7xx: fix Kconfig dependencies
When I2C=m and SPI=y or-ing them will produce =y while
what we need is the lower bound, i.e. =m.  Fortunately
SPI is a boolean so we need to handle only one special
case.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:32:32 -07:00
Axel Lin d8c2c0d892 serial: etraxfs-uart: Fix release etraxfs_uart_ports
In probe, we use dev_id as array index of etraxfs_uart_ports and store the
index in port->line. So etraxfs_uart_ports[port->line] should be released
when unload the module.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Niklas Cassel <nks@flawful.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:25:38 -07:00
Martin K. Petersen f3f5da624e block: Do a full clone when splitting discard bios
This fixes a data corruption bug when using discard on top of MD linear,
raid0 and raid10 personalities.

Commit 20d0189b10 "block: Introduce new bio_split()" permits sharing
the bio_vec between the two resulting bios. That is fine for read/write
requests where the bio_vec is immutable. For discards, however, we need
to be able to attach a payload and update the bio_vec so the page can
get mapped to a scatterlist entry. Therefore the bio_vec can not be
shared when splitting discards and we must do a full clone.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Seunguk Shin <seunguk.shin@samsung.com>
Tested-by: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Seunguk Shin <seunguk.shin@samsung.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: <stable@vger.kernel.org> # v3.14+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-23 16:21:34 -06:00
Dongxing Zhang 08b33249d8 tty/vt: Fix the memory leak in visual_init
If vc->vc_uni_pagedir_loc is not NULL, its refcount needs to be
decreased before vc_uni_pagedir_loc is re-assigned.

unreferenced object 0xffff88002cdd13b0 (size 512):
  comm "setfont", pid 503, jiffies 4294896503 (age 722.828s)
  hex dump (first 32 bytes):
    40 92 61 2b 00 88 ff ff 00 00 00 00 00 00 00 00  @.a+............
    00 00 00 00 00 00 00 00 a0 ad 61 2b 00 88 ff ff  ..........a+....
  backtrace:
    [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240
    [<ffffffff814ae7d3>] con_do_clear_unimap.isra.2+0x83/0xe0
    [<ffffffff814ae9b2>] con_clear_unimap+0x22/0x40
    [<ffffffff814a8db8>] vt_ioctl+0xeb8/0x1170
    [<ffffffff8149b458>] tty_ioctl+0x208/0xca0
    [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510
    [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0
    [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75
    [<ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffff88002b619240 (size 256):
  comm "setfont", pid 503, jiffies 4294896503 (age 722.828s)
  hex dump (first 32 bytes):
    90 bc 84 d5 00 88 ff ff 58 85 84 d5 00 88 ff ff  ........X.......
    88 ac 84 d5 00 88 ff ff e0 b1 84 d5 00 88 ff ff  ................
  backtrace:
    [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240
    [<ffffffff814ae286>] con_insert_unipair+0x86/0x170
    [<ffffffff814af107>] con_set_unimap+0x1b7/0x280
    [<ffffffff814a8d65>] vt_ioctl+0xe65/0x1170
    [<ffffffff8149b458>] tty_ioctl+0x208/0xca0
    [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510
    [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0
    [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Dongxing Zhang <dongxing.zhang@intel.com>
Signed-off-by: Xiaoming Wang <xiaoming.wang@intel.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:11:08 -07:00
Krzysztof Kozlowski 97a60eac33 serial: amba-pl011: Fix devm_ioremap_resource return value check
Value returned by devm_ioremap_resource() was checked for non-NULL but
devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of
error this could lead to dereference of ERR_PTR.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Cc: <stable@vger.kernel.org>
Fixes: 3873e2d7f6 ("drivers: PL011: refactor pl011_probe()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:05:53 -07:00
Peter Hurley 3b19e03229 n_tty: signal and flush atomically
When handling signalling char, claim the termios write lock before
signalling waiting readers and writers to prevent further i/o
before flushing the echo and output buffers. This prevents a
userspace signal handler which may output from racing the terminal
flush.

Reference: Bugzilla #99351 ("Output truncated in ssh session after...")
Fixes: commit d2b6f44779 ("n_tty: Fix signal handling flushes")
Reported-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:05:53 -07:00
Bernhard Bender 968491709e Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30
touch screen.  Due to a missing delay between the RESET and SET_RATE
commands, the touch screen may become unresponsive during system startup or
driver loading.

According to the DMC documentation, a delay is needed after the RESET
command to allow the chip to complete its internal initialization. As this
delay is not guaranteed, we had a system where the touch screen
occasionally did not send any touch data. There was no other indication of
the problem.

The patch fixes the problem by adding a 150ms delay between the RESET and
SET_RATE commands.

Cc: stable@vger.kernel.org
Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com>
Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23 14:43:17 -07:00
Greg Kroah-Hartman 00243b1d18 3rd round of IIO fixes for the 4.2 cycle.
* bmc150_magn - add missing regmap dependency and ensure on a wrong chip
   case report hte chip id rather than a previous return value.
 * mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic
   that results in North and South being swapped.
 * mlx96014 - correct the offset value reported to userspace (wrong sign)
 * vf610 - Prevent non aligned register reading.
 * mcp320x - Another null pointer deference bug.
 * mma8452 - change threshold type from THRESH to MAG to reflect the fact
   that the sign of the signal is not known when the event is signaled.
 * stk3310 - move device registert to end of probe to avoid race conditions
   when coming up, check for invalid client->irq values and make it work
   for both endian types of host.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVsUrgAAoJEFSFNJnE9BaI0U4P/1io/Qzbsoj0BTShAfIo4sxo
 7zdewcepjkC/X6VwyOgUsLfX9qq4HUOjCyq7HlJVgRpc34QySE0TRQY1sw72LeH8
 L5fu2GWk1U7e1+pVN6fA2xz/OY/Emus1FAIAnWI6fzfT4GCSJ3jPbnCmk7Z0c6ce
 CxJmKPGWs17eMhazhfKXu0NAP8WHGhfoUsKr5I8o1tU/gIZJck2NI4PPjGRT5tLX
 tACKXba9DIsB7vZPaSGNskvlIBDM0Wxy4RL9ZzmWxBSG63HasLmjqUv9taZf+UX/
 eYsbDGhPZwy3CVaf9xa+56juyMYrRR87p33D0bZ7gMsBtTx210WjOBtaPNkO4LyC
 KjkSKYi46iSwKIOM575wDJPw5pxUXTYZaiS4u3RZ7mDiHsPmkKe7I5/OA/zKJ91J
 /xHRkU8GXzZdDwzZjaoZ+0BO0q4feWEvOEKkJVUgE6IlLuE//+AQj0N+aMWmVyV5
 M/1SfyQFdZhovjrJtSjPkbQFl0l9QhkzBr5vt8Q2c6z2dOokxkahbNOvV1yBX7HA
 FCreFGbW4eTmNCY8a8CZ0WyOUZXj8jKBShaFkfYBBm8icgw2Zq/CXv5LeypuihzC
 MP8wmxUbKxZTBWSk4TxWMFYpWCQaGQP42TxQju8DpHQpEiKHhE6SGpX9P+3u1NRo
 Dej1LTUx5LlKzPpTXBBG
 =AEVb
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

3rd round of IIO fixes for the 4.2 cycle.

* bmc150_magn - add missing regmap dependency and ensure on a wrong chip
  case report hte chip id rather than a previous return value.
* mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic
  that results in North and South being swapped.
* mlx96014 - correct the offset value reported to userspace (wrong sign)
* vf610 - Prevent non aligned register reading.
* mcp320x - Another null pointer deference bug.
* mma8452 - change threshold type from THRESH to MAG to reflect the fact
  that the sign of the signal is not known when the event is signaled.
* stk3310 - move device registert to end of probe to avoid race conditions
  when coming up, check for invalid client->irq values and make it work
  for both endian types of host.
2015-07-23 13:32:05 -07:00
Linus Torvalds 45b4b782e8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace fixes from Eric Biederman:
 "While reading through the code of detach_mounts I realized the code
  was slightly off.  Testing it revealed two buggy corner cases that can
  send the code of detach_mounts into an infinite loop.

  Fixing the code to do the right thing removes the possibility of these
  user triggered infinite loops in the code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: In detach_mounts detach the appropriate unmounted mount
  mnt: Clarify and correct the disconnect logic in umount_tree
2015-07-23 13:16:21 -07:00
Linus Torvalds d1a343a023 virtio/vhost: fixes for 4.2
Bugfixes and documentation fixes. Igor's patch that allows
 users to tweak memory table size is borderline,
 but it does fix known crashes, so I merged it.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVpBzpAAoJECgfDbjSjVRpQXEIAMEqetqPuRduynjIw2HNktle
 fe/UUhvipwTsAM4R2pmcEl5tW04A/M54RkXN4iVy0rPshAfG3Fh4XTjLmzSGU0fI
 KD6qX8/Zc/+DUWnfe3aUC6jOOrjb7c4xRKOlQ9X8lZgi2M6AzrPeoZHFTtbX34CU
 2kcnv5Sb1SaI/t2SaCc2CaKilQalEOcd59gGjje2QXjidZnIVHwONrOyjBiINUy6
 GzfTgvAje8ZiG6951W3HDwwSfcqXezin27LJqnZgaLCwTCKt2gdQ2MAKjrfP2aVF
 +gX2B4XxcFLutMVx/obsjvA1ceipubyUauRLB3mnO3P5VOj1qbofa2lj4pzQ80k=
 =EKPr
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio/vhost fixes from Michael Tsirkin:
 "Bugfixes and documentation fixes.

  Igor's patch that allows users to tweak memory table size is
  borderline, but it does fix known crashes, so I merged it"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: add max_mem_regions module parameter
  vhost: extend memory regions allocation to vmalloc
  9p/trans_virtio: reset virtio device on remove
  virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio
  MAINTAINERS: separate section for s390 virtio drivers
  virtio: define virtio_pci_cfg_cap in header.
  virtio: Fix typecast of pointer in vring_init()
  virtio scsi: fix unused variable warning
  vhost: use binary search instead of linear in find_region()
  virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS
2015-07-23 13:07:04 -07:00
Tejun Heo 5aa2a96b34 block: export bio_associate_*() and wbc_account_io()
bio_associate_blkcg(), bio_associate_current() and wbc_account_io()
are used to implement cgroup writeback support for filesystems and
thus need to be exported.  Export them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-23 13:36:44 -06:00
Linus Torvalds b681268cb2 IOMMU Fixes for Linux v4.2-rc3
The fixes include:
 
 	* A couple of fixes for the new ARM-SMMUv3 driver to fix issues found
 	  on the first real implementation of that hardware.
 
 	* A patch for the Intel VT-d driver to fix a domain-id leak.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVsRnaAAoJECvwRC2XARrjl1IQANRhxppbl3HgCj8rB7z4rsoL
 VFWGcGHZGPBQ8roTp687U2l7nXnqLaFWswVgAkz0+Bao/HdySOFD93do2JX0TdBt
 nvPVTsoVDKLhatLrud1FwD6JIWpBEh/gwnXsJm6UBCWkk4iSnyMlhOzrWNMBvjyH
 z8jBv4DZa0LtYXqa8CWacKJZjv3k3/SjvYJdhBY5H4VaAC1azSqIDCJbPW6Oybi8
 I3+lidZvHnRPA8JLF+VNee62q9qwmbftw+HZ4UZD4fGHsCFtGr9Fdux/Ec4Lwqvt
 vlVqn2i8RssUg7KIzUUkWUnQGe21/+9th/A7G7t7qXoSG9wm1ICkDbWRUtT7hkrD
 2YV32kzn95F6dOmKdki3o/rt1MgzfV9TVGG5VmkkvZp7MzEvx41zM8pQIS42K11G
 xVciVlrR3Z03DMqwK+j/6Tk+CMtxfzoWodXkTUwMwnHmxFc8G+6z6sQplmeUVpoj
 rABSXbubUQnzM8vmf7tvlUBpz0eAMfB2Y7hAeJv/iigySjT3kUZ3R6sgSWLhUrec
 yDFugwnAlICroNG9tsODTDf5T9+Z3XwsIrOl4Vc8mhGTwms6/7kfFziTFeViAUm4
 rCKZ2619PW2JcMBrFQx7CSCCp27wsk+EkLnZ0WmSaSUrlxHx65T+bbWU/UMShTQM
 S1rZcEFKstSrN/ybUIRD
 =zWOU
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:
 "The fixes include:

   - a couple of fixes for the new ARM-SMMUv3 driver to fix issues found
     on the first real implementation of that hardware.

   - a patch for the Intel VT-d driver to fix a domain-id leak"

* tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix VM domain ID leak
  iommu/arm-smmu: Skip the execution of CMD_PREFETCH_CONFIG
  iommu/arm-smmu: Enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize
  iommu/arm-smmu: Fix the values of ARM64_TCR_{I,O}RGN0_SHIFT
  iommu/arm-smmu: Fix LOG2SIZE setting for 2-level stream tables
  iommu/arm-smmu: Fix the index calculation of strtab
2015-07-23 12:25:44 -07:00
Alex Deucher acc6a1a69b drm/amdgpu/cz/dpm: properly report UVD and VCE clock levels
VCE, UVD DPM work similarly to SCLK DPM.  Report the current
clock levels for UVD and VCE via debugfs.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 15:10:32 -04:00
Alex Deucher f2d52cd4db drm/amdgpu/cz: implement voltage validation properly
CZ uses a different set of registers compared to previous asics
and supports separate NB and GFX planes.

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 15:09:27 -04:00
Chris Metcalf 3f81d2447b tile: use free_bootmem_late() for initrd
We were previously using free_bootmem() and just getting lucky
that nothing too bad happened.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: stable@vger.kernel.org
2015-07-23 14:11:09 -04:00
Eric W. Biederman fe78fcc85a mnt: In detach_mounts detach the appropriate unmounted mount
The handling of in detach_mounts of unmounted but connected mounts is
buggy and can lead to an infinite loop.

Correct the handling of unmounted mounts in detach_mount.  When the
mountpoint of an unmounted but connected mount is connected to a
dentry, and that dentry is deleted we need to disconnect that mount
from the parent mount and the deleted dentry.

Nothing changes for the unmounted and connected children.  They can be
safely ignored.

Cc: stable@vger.kernel.org
Fixes: ce07d891a0 mnt: Honor MNT_LOCKED when detaching mounts
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-23 11:31:15 -05:00
Leo Liu fa92754e9c drm/amdgpu: add VCE harvesting instance query
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-07-23 11:09:45 -04:00
Alex Deucher 6a585777c8 drm/amdgpu: implement VCE 3.0 harvesting support (v4)
For boards with bad VCE blocks, only configure the working
block.

v2: use the harvest info for pipe setup
v3: fix mask check as noted by Leo
v4: add dGPU support

Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23 11:09:44 -04:00
Michel Dänzer 5e6775abb5 drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTC
This doesn't seem strictly necessary with Tonga right now, but that might
change with future power management enhancements.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2015-07-23 11:09:43 -04:00
Michel Dänzer d84b272a12 drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTC
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.

Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2015-07-23 11:09:43 -04:00
Alex Williamson 46ebb7af7b iommu/vt-d: Fix VM domain ID leak
This continues the attempt to fix commit fb170fb4c5 ("iommu/vt-d:
Introduce helper functions to make code symmetric for readability").
The previous attempt in commit 7168440690 ("iommu/vt-d: Detach
domain *only* from attached iommus") overlooked the fact that
dmar_domain.iommu_bmp gets cleared for VM domains when devices are
detached:

intel_iommu_detach_device
  domain_remove_one_dev_info
    domain_detach_iommu

The domain is detached from the iommu, but the iommu is still attached
to the domain, for whatever reason.  Thus when we get to domain_exit(),
we can't rely on iommu_bmp for VM domains to find the active iommus,
we must check them all.  Without that, the corresponding bit in
intel_iommu.domain_ids doesn't get cleared and repeated VM domain
creation and destruction will run out of domain IDs.  Meanwhile we
still can't call iommu_detach_domain() on arbitrary non-VM domains or
we risk clearing in-use domain IDs, as 7168440690 attempted to
address.

It's tempting to modify iommu_detach_domain() to test the domain
iommu_bmp, but the call ordering from domain_remove_one_dev_info()
prevents it being able to work as fb170fb4c5 seems to have intended.
Caching of unused VM domains on the iommu object seems to be the root
of the problem, but this code is far too fragile for that kind of
rework to be proposed for stable, so we simply revert this chunk to
its state prior to fb170fb4c5.

Fixes: fb170fb4c5 ("iommu/vt-d: Introduce helper functions to make
                      code symmetric for readability")
Fixes: 7168440690 ("iommu/vt-d: Detach domain *only* from attached
                      iommus")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-07-23 14:17:39 +02:00
Paolo Bonzini 0da029ed7e KVM: x86: rename quirk constants to KVM_X86_QUIRK_*
Make them clearly architecture-dependent; the capability is valid for
all architectures, but the argument is not.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-23 08:24:42 +02:00