mirror of https://gitee.com/openkylin/linux.git
45988 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
9ff7258575 |
Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull proc updates from Eric Biederman: "This has four sets of changes: - modernize proc to support multiple private instances - ensure we see the exit of each process tid exactly - remove has_group_leader_pid - use pids not tasks in posix-cpu-timers lookup Alexey updated proc so each mount of proc uses a new superblock. This allows people to actually use mount options with proc with no fear of messing up another mount of proc. Given the kernel's internal mounts of proc for things like uml this was a real problem, and resulted in Android's hidepid mount options being ignored and introducing security issues. The rest of the changes are small cleanups and fixes that came out of my work to allow this change to proc. In essence it is swapping the pids in de_thread during exec which removes a special case the code had to handle. Then updating the code to stop handling that special case" * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: proc_pid_ns takes super_block as an argument remove the no longer needed pid_alive() check in __task_pid_nr_ns() posix-cpu-timers: Replace __get_task_for_clock with pid_for_clock posix-cpu-timers: Replace cpu_timer_pid_type with clock_pid_type posix-cpu-timers: Extend rcu_read_lock removing task_struct references signal: Remove has_group_leader_pid exec: Remove BUG_ON(has_group_leader_pid) posix-cpu-timer: Unify the now redundant code in lookup_task posix-cpu-timer: Tidy up group_leader logic in lookup_task proc: Ensure we see the exit of each process tid exactly once rculist: Add hlists_swap_heads_rcu proc: Use PIDTYPE_TGID in next_tgid Use proc_pid_ns() to get pid_namespace from the proc superblock proc: use named enums for better readability proc: use human-readable values for hidepid docs: proc: add documentation for "hidepid=4" and "subset=pid" options and new mount behavior proc: add option to mount only a pids subset proc: instantiate only pids that we can ptrace on 'hidepid=4' mount option proc: allow to mount many instances of proc in one pid namespace proc: rename struct proc_fs_info to proc_fs_opts |
|
|
Linus Torvalds
|
9fb4c5250f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina: - simplifications and improvements for issues Peter Ziljstra found during his previous work on W^X cleanups. This allows us to remove livepatch arch-specific .klp.arch sections and add proper support for jump labels in patched code. Also, this patchset removes the last module_disable_ro() usage in the tree. Patches from Josh Poimboeuf and Peter Zijlstra - a few other minor cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: MAINTAINERS: add lib/livepatch to LIVE PATCHING livepatch: add arch-specific headers to MAINTAINERS livepatch: Make klp_apply_object_relocs static MAINTAINERS: adjust to livepatch .klp.arch removal module: Make module_enable_ro() static again x86/module: Use text_mutex in apply_relocate_add() module: Remove module_disable_ro() livepatch: Remove module_disable_ro() usage x86/module: Use text_poke() for late relocations s390/module: Use s390_kernel_write() for late relocations s390: Change s390_kernel_write() return type to match memcpy() livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols livepatch: Remove .klp.arch livepatch: Apply vmlinux-specific KLP relocations early livepatch: Disallow vmlinux.ko |
|
|
Linus Torvalds
|
631d691408 |
sound updates for 5.8-rc1
It was another busy development cycle, and the majority of changes
are found in ASoC side. Below are Some highlights.
ASoC core:
- Lots of core cleanups and refactorings, still on-going work by
Morimoto-san
ASoC drivers:
- Continued work on cleaning up and improving the Intel SOF stuff,
along with new platform support including SoundWire
- Fixes to make the Marvell SSPA driver work upstream
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
USB-audio:
- Improvement for sync and implicit feedback streams with the more
accurate frame size calculation and full-duplex support
- Support for RME Babyface Pro and Prioneer DJ DJM
HD-audio:
- Fixes for Mic mute LED on HP machines
- Re-enable support of Intel SST driver for SKL/KBL platforms
FireWire:
- Lots of refactoring, add support for RME FireFace and MOTU
UltraLite-mk3
-----BEGIN PGP SIGNATURE-----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=E+d+
-----END PGP SIGNATURE-----
Merge tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was another busy development cycle, and the majority of changes are
found in ASoC side. Below are Some highlights.
ASoC core:
- Lots of core cleanups and refactorings, still on-going work by
Morimoto-san
ASoC drivers:
- Continued work on cleaning up and improving the Intel SOF stuff,
along with new platform support including SoundWire
- Fixes to make the Marvell SSPA driver work upstream
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
USB-audio:
- Improvement for sync and implicit feedback streams with the more
accurate frame size calculation and full-duplex support
- Support for RME Babyface Pro and Prioneer DJ DJM
HD-audio:
- Fixes for Mic mute LED on HP machines
- Re-enable support of Intel SST driver for SKL/KBL platforms
FireWire:
- Lots of refactoring, add support for RME FireFace and MOTU
UltraLite-mk3"
* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
ALSA: es1688: Add the missed snd_card_free()
ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
ASoC: qcom: q6asm-dai: kCFI fix
ASoC: soc-card: add snd_soc_card_remove_dai_link()
ASoC: soc-card: add snd_soc_card_add_dai_link()
ASoC: soc-card: add snd_soc_card_set_bias_level_post()
ASoC: soc-card: add snd_soc_card_set_bias_level()
ASoC: soc-card: add snd_soc_card_remove()
ASoC: soc-card: add snd_soc_card_late_probe()
ASoC: soc-card: add snd_soc_card_probe()
ASoC: soc-card: add probed bit field to snd_soc_card
ASoC: soc-card: add snd_soc_card_resume_post()
ASoC: soc-card: add snd_soc_card_resume_pre()
ASoC: soc-card: add snd_soc_card_suspend_post()
ASoC: soc-card: add snd_soc_card_suspend_pre()
ASoC: soc-card: move snd_soc_card_subclass to soc-card
ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
...
|
|
|
Linus Torvalds
|
86c67ce20d |
LEDs pull request for 5.8-rc1.
New drivers: aw2013, sgm3140, some fixes. Nothing much to see here, next release should be more interesting. -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXtjlggAKCRAw5/Bqldv6 8mi4AJ9sFTwt9zcnIB3dZcD+C9J/GtCU7ACgwlN9UsQ1qvpEG1xE0mSgLlPvebQ= =HymN -----END PGP SIGNATURE----- Merge tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "New drivers: aw2013, sgm3140, some fixes Nothing much to see here, next release should be more interesting" * tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: add aw2013 driver dt-bindings: leds: Add binding for aw2013 leds: trigger: remove redundant assignment to variable ret leds: netxbig: Convert to use GPIO descriptors leds: add sgm3140 driver dt-bindings: leds: Add binding for sgm3140 leds: ariel: Add driver for status LEDs on Dell Wyse 3020 leds: pwm: check result of led_pwm_set() in led_pwm_add() leds: tlc591xxt: hide error on EPROBE_DEFER leds: tca6507: Include the right header leds: lt3593: Drop surplus include leds: lp3952: Include the right header leds: lm355x: Drop surplus include |
|
|
Bjorn Helgaas
|
51755de739 |
Merge branch 'remotes/lorenzo/pci/rcar'
- Fix rcar OB window programming (Andrew Murray)
- Add rcar suspend/resume support (Kazufumi Ikeda)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
- Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode
(Lad Prabhakar)
- Move shareable code to pcie-rcar.c (Lad Prabhakar)
- Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar)
- Add endpoint support for multiple outbound memory windows (Lad
Prabhakar)
- Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar)
* remotes/lorenzo/pci/rcar:
MAINTAINERS: Add file patterns for rcar PCI device tree bindings
PCI: rcar: Add endpoint mode support
dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
PCI: endpoint: Add support to handle multiple base for mapping outbound memory
PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
PCI: rcar: Fix calculating mask for PCIEPAMR register
PCI: rcar: Move shareable code to a common file
PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
dt-bindings: pci: rcar: add r8a77961 support
PCI: rcar: Add suspend/resume
PCI: rcar: Fix incorrect programming of OB windows
|
|
|
Bjorn Helgaas
|
210d8ea82a |
Merge branch 'remotes/lorenzo/pci/misc'
- Correct MAINTAINERS typo for NXP LAYERSCAPE GEN4 (Lukas Bulwahn) - Make PCI endpoint doc section labels unique (Bryce Willey) * remotes/lorenzo/pci/misc: Documentation: PCI: Give unique labels to sections MAINTAINERS: correct typo in new NXP LAYERSCAPE GEN4 |
|
|
Bjorn Helgaas
|
b9fcf4910b |
Merge branch 'remotes/lorenzo/pci/dwc'
- Simplify computation of msix_tbl (Jiri Slaby)
- Make hisi_pcie_platform_ops static (Zou Wei)
- Warn about resources above 4G (Alan Mikhak)
- Make intel_pcie_cpu_addr() static (Jason Yan)
- Use devm_platform_ioremap_resource_byname() to simplify code and
improve error checking (Wei Yongjun)
- Fix inner MSI IRQ domain registration so it doesn't confuse debugfs
(Marc Zyngier)
- Don't use FAST_LINK_MODE on meson (Marc Zyngier)
- Add Socionext UniPhier Pro5 PCIe endpoint controller driver and DT
description (Kunihiko Hayashi)
* remotes/lorenzo/pci/dwc:
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
PCI: dwc: intel: Make intel_pcie_cpu_addr() static
PCI: dwc: Program outbound ATU upper limit register
PCI: dwc: Make hisi_pcie_platform_ops static
PCI: dwc: Clean up computing of msix_tbl
|
|
|
Bjorn Helgaas
|
712879510f |
Merge branch 'remotes/lorenzo/pci/cadence'
- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits'
bindings in favor of deriving them from 'ranges' and 'dma-ranges'
(Kishon Vijay Abraham I)
- Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
|
|
|
Bjorn Helgaas
|
a1dcc1aa6f |
Merge branch 'remotes/lorenzo/pci/brcmstb'
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Remove unnecessary clk_put(); devm_clk_get() handles this automatically
(Jim Quinlan)
- Fix outbound memory window register stride offset (Jim Quinlan)
- Add "aspm-no-l0s" property for brcmstb and disable ASPM L0s when
present (Jim Quinlan)
- Add property to notify Raspberry Pi firmware of xHCI reset (Nicolas
Saenz Julienne)
- Add Raspberry Pi VL805 xHCI init function to trigger VL805 firmware
load (Nicolas Saenz Julienne)
- Wait in brcmstb probe for Raspberry Pi VL805 firmware initialization
(Nicolas Saenz Julienne)
- Load Raspberry Pi VL805 firmware in USB early handoff quirk (Nicolas
Saenz Julienne)
* remotes/lorenzo/pci/brcmstb:
USB: pci-quirks: Add Raspberry Pi 4 quirk
PCI: brcmstb: Wait for Raspberry Pi's firmware when present
firmware: raspberrypi: Introduce vl805 init routine
soc: bcm2835: Add notify xHCI reset property
PCI: brcmstb: Disable L0s component of ASPM if requested
dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'
PCI: brcmstb: Fix window register offset from 4 to 8
PCI: brcmstb: Don't clk_put() a managed clock
PCI: brcmstb: Assert fundamental reset on initialization
|
|
|
Linus Torvalds
|
0486a39a6d |
linux-watchdog 5.8-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAl7Xe/kACgkQ+iyteGJfRsqNGQCfeElXEDv9j+KHROxL94EYYoKP Up8AoI/Gnhfmi/WVCyrwvfdtuAbfehcN =72fM -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add new arm_smc_wdt watchdog driver - da9062 and da9063 improvements - clarify documentation about stop() that became optional - document r8a7742 support - some overall fixes and improvements * tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: m54xx: Add missing include dt-bindings: watchdog: renesas,wdt: Document r8a7742 support watchdog: Fix runtime PM imbalance on error watchdog: riowd: remove unneeded semicolon watchdog: Add new arm_smc_wdt watchdog driver dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog watchdog: imx2_wdt: update contact email watchdog: iTCO: fix link error watchdog: da9062: No need to ping manually before setting timeout watchdog: da9063: Make use of pre-configured timeout during probe watchdog: da9062: Initialize timeout during probe watchdog: clarify that stop() is optional watchdog: imx_sc_wdt: Fix reboot on crash watchdog: ts72xx_wdt: fix build error |
|
|
Linus Torvalds
|
302d5b3321 |
- Core Frameworks
- Add backlight_device_get_by_name() to the API
- New Device Support
- Add support for WLED5 to Qualcomm WLED
- Fix-ups
- Convert to GPIO descriptors; l4f00242t03
- Device Tree fix-ups; qcom-wled
- Bug Fixes
- Properly disable regulators on .probe() failure
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl7XZbwACgkQUa+KL4f8
d2FvuA//bkTfuewuIz8KEAjpDRftXqvhroq5++kzvziYCcleQzk1SytpaCUXxw20
Cn/sEXzdmzDbfwvZI9X+Ptsg3rf+MzP3dXc6azkmcYRP8gGdAJ7Tz4lH9Y9pH3lk
AckZO4FWnmQ5a9KEPxhW+FZwwCeMH0DZd2eXUpgD+GwZePDi7TmdNWcaD7nhsaRd
14DTce1I0ZJrV39KcOXZbx80v6l6b8jtiIjYLPVS9wQx4KiGoHlPERztEANDakIp
FDexk4smP+wfFQuhcYunNB31ZzTE50uT1SsilMOoIs0OIgPt/dfDr2DiRN8wp2Rv
5kSXO1qou3KNRFTvn1WqfWXBQmmJRQfZUvQypppMHbzx48xlAbStQF1h9eYod6EU
J8EoO/EbyOPNXc7do0NKwnfNvdz1tmI9Qpj4Hz3T9C9spzQ9FPU3G+5VsdB/Rv5G
B2AJAOG/GJqILDG8hLJ0ZaFYArmLyQCFbJhaRtvPqOSMmlWKgeFdSC8AzSNhf6EC
3Xkk4f5toKao7lgcEOWRbVYKVsdjSSxr4pwyW5VNi5XfR1DsKQj8gyCf5qrmasQE
11v8juUP/R/6XrHvCco0zgMlVk7k/O0IQ9k0ozRKqGBtz+UKN28EzsuV/TJ0qIVN
UTwNoKuh9QixnTRb9Jnfl3EioFIv7JjXQVpLPhj+sGInjKv3y4Y=
=sHzj
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Add backlight_device_get_by_name() to the API
New Device Support:
- Add support for WLED5 to Qualcomm WLED
Fix-ups:
- Convert to GPIO descriptors in l4f00242t03
- Device Tree fix-ups for qcom-wled
Bug Fixes:
- Properly disable regulators on .probe() failure"
* tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Add backlight_device_get_by_name()
backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs
dt-bindings: backlight: qcom-wled: Add WLED5 bindings
backlight: qcom-wled: Add callback functions
dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format
backlight: l4f00242t03: Convert to GPIO descriptors
backlight: lp855x: Ensure regulators are disabled on probe failure
|
|
|
Linus Torvalds
|
512b7d37ee |
- Core Frameworks
- Constify 'properties' attribute in core header file
- New Drivers
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
- Rework Intel's SCU IPC collection
- Eliminate near duplicate IPC functionality
- Split out MFD related activities into a dedicated MFD driver
- Fix-ups
- Use new I2C API; htc-i2cpld
- Remove superfluous code; sprd-sc27xx-spi
- Improve error handling; stm32-timers
- Device Tree additions/fixes; mt6397
- Defer probe betterment; wm8994-core
- Improve module handling; wm8994-core
- Staticify; stpmic1
- Trivial (spelling, formatting); tqmx86
- Bug Fixes
- Fix incorrect register/PCI IDs; intel-lpss-pci
- Fix unbalanced Regulator API calls; wm8994-core
- Fix double free(); wcd934x
- Remove IRQ domain on failure; stmfx
- Reset chip on resume; stmfx
- Disable/enable IRQs on suspend/resume; stmfx
- Do not use bulk writes on H/W which does not support them; max77620
-----BEGIN PGP SIGNATURE-----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=746a
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Constify 'properties' attribute in core header file
New Drivers:
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
Fix-ups:
- Use new I2C API in htc-i2cpld
- Remove superfluous code in sprd-sc27xx-spi
- Improve error handling in stm32-timers
- Device Tree additions/fixes in mt6397
- Defer probe betterment in wm8994-core
- Improve module handling in wm8994-core
- Staticify in stpmic1
- Trivial (spelling, formatting) in tqmx86
Bug Fixes:
- Fix incorrect register/PCI IDs in intel-lpss-pci
- Fix unbalanced Regulator API calls in wm8994-core
- Fix double free() in wcd934x
- Remove IRQ domain on failure in stmfx
- Reset chip on resume in stmfx
- Disable/enable IRQs on suspend/resume in stmfx
- Do not use bulk writes on H/W which does not support them in max77620"
* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
mfd: Add support for PMIC MT6360
mfd: max77620: Use single-byte writes on MAX77620
mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
mfd: stmfx: Fix stmfx_irq_init error path
mfd: stmfx: Reset chip on resume as supply was disabled
mfd: wm8994: Silence warning about supplies during deferred probe
mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
mfd: wm8994: Fix driver operation if loaded as modules
dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
mfd: Constify properties in mfd_cell
mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
mfd: sprd: Remove unnecessary spi_bus_type setting
mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
mfd: stpmic1: Make stpmic1_regmap_config static
mfd: htc-i2cpld: Convert to use i2c_new_client_device()
MAINTAINERS: Add entry for mp2629 Battery Charger driver
power: supply: mp2629: Add impedance compensation config
...
|
|
|
Linus Torvalds
|
a484a497c9 |
Keyrings changes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl7WfNsACgkQ+7dXa6fL C2t5ag//Qn+FR6IGeGOig9mDE5IVqY/CUB15xjYYO28aV5bjOBFmwhFVKjbJfzX5 jOO11pGMbVkkNavsEXxw4DA5LXXpFG7frub9DysO5xDU8dTvHB2Cov1jQOFP76Hf Gx91Xq0W8FE51genxy7Wp1BFxU/OPX3K1+LoE7ocDKTq5ctdZhZP8Fgr6Ip+1Tdi ECbRGpWP54V6+KO8RfayiEF4E7Hry+NT/5ogSbAMTHLnZyMpqjCPGxhEa11vfr/v ZVQ0Esp7rBJdLw6gYWf6TDYuwARiKo2LDQFQnGyvf0QUZSfDtoTdQihszHmalcBE Uh+6B+BlKQX8VPqsgw8yEgXqFzf8sw5WpwfeQFkS3Pn8J90R9S3q//4kNfNOgeZV ydqWG1VCORwm+X/8rAy8l0lXlA/JR++B7T7kvdM6Yslt5SB/4KQigS7n2tlp6+Ms 9SwUf2GnGBJWS4kFCgEkSP6QAP9wimGkqZx+rwYytqnjCc/X18FUrRge99o2MHcs kHGHvok4dy/BPHap4GAoFZbfvg7LuU2SwRfNdMRB87sUi7dqqYvUiy0OGLmDuK3X 7lvuJpmEjKkHFSUXRlV9yvvZdciJ/k+VoKOZf/oEQE4t2m0rsCQcCOlljwpLKaED m1dQzEq1OkgA2goCnHehR+Fkq61JWkUGrM+jbPmu8Chg9psuqIs= =RnLl -----END PGP SIGNATURE----- Merge tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring updates from David Howells: - Fix a documentation warning. - Replace a zero-length array with a flexible one - Make the big_key key type use ChaCha20Poly1305 and use the crypto algorithm directly rather than going through the crypto layer. - Implement the update op for the big_key type. * tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Implement update for the big_key type security/keys: rewrite big_key crypto to use library interface KEYS: Replace zero-length array with flexible-array Documentation: security: core.rst: add missing argument |
|
|
Miklos Szeredi
|
df820f8de4 |
ovl: make private mounts longterm
Overlayfs is using clone_private_mount() to create internal mounts for underlying layers. These are used for operations requiring a path, such as dentry_open(). Since these private mounts are not in any namespace they are treated as short term, "detached" mounts and mntput() involves taking the global mount_lock, which can result in serious cacheline pingpong. Make these private mounts longterm instead, which trade the penalty on mntput() for a slightly longer shutdown time due to an added RCU grace period when putting these mounts. Introduce a new helper kern_unmount_many() that can take care of multiple longterm mounts with a single RCU grace period. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> |
|
|
Linus Torvalds
|
a98f670e41 |
media updates for v5.8-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl7XUmwACgkQCF8+vY7k 4RU4zg//fT32wiVAPHCCp+pDZVnWNeipXE1gnpqghd/qZXfzBPiLEC9sPS74VVkA jf1hhR33VZpKAKTPg/b074qhRZBywEOdHZnT/0CEE1oNB61shVOnyDYzLGSq95cO 6V55ovbi5IOkrg0QEJbHpG5YHzt+pq5XeWOkqGNsHwla7N7iMGMVYfHepVVDWPnZ 0wGYFF9cAJP+X/uxqkZLDVMA/K1I+QKh6vrj/qx53/eRt8VID3+i8ig3guk4PlUq 7RLw5w/CywtNaGE5zaz7T3i2eoED71JHOTXi6RxdP1z8IDvELZ9mT95GQ+enlwqt AS6Ju1sV40wviHMv5prJWQjJkrrtYH3S907lIjwBpQLNGbh2+5crCd/6CwumkGgv 1cCZ1dVmXpCe++9mU9AXmSkjsjGPStNcmHMOpc1Pwn9jUV3LQOOSDp8+RYdt1WHU Iw9cyM8NOpz5Mv/B1/ZPQ1gPb9lr1gE09XyUekxtAI/nl4nNHGWO8QDuX7Odfrv9 8nfo14lk/p6XCTA8dsWJCgI5B1fgnqD4frHKWO9Uctppc/KBW41c8JpQUjBNlG/T MhtlGwYMVgSQxpQ6wK018JUAFoWkn1Sr0zMKRayqCnMjMLHsaMwE6kq+LgmRBqbB ersKV/9ZLYqCU1d6PhEVG6xUs6GsWdLcyhALlmHsddPSdpFXdf8= =KNAo -----END PGP SIGNATURE----- Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h> media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ... |
|
|
Linus Torvalds
|
ee01c4d72a |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "More mm/ work, plenty more to come Subsystems affected by this patch series: slub, memcg, gup, kasan, pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs, thp, mmap, kconfig" * akpm: (131 commits) arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined riscv: support DEBUG_WX mm: add DEBUG_WX support drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() powerpc/mm: drop platform defined pmd_mknotpresent() mm: thp: don't need to drain lru cache when splitting and mlocking THP hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs sparc32: register memory occupied by kernel as memblock.memory include/linux/memblock.h: fix minor typo and unclear comment mm, mempolicy: fix up gup usage in lookup_node tools/vm/page_owner_sort.c: filter out unneeded line mm: swap: memcg: fix memcg stats for huge pages mm: swap: fix vmstats for huge pages mm: vmscan: limit the range of LRU type balancing mm: vmscan: reclaim writepage is IO cost mm: vmscan: determine anon/file pressure balance at the reclaim root mm: balance LRU lists based on relative thrashing mm: only count actual rotations as LRU reclaim cost ... |
|
|
Christoph Hellwig
|
cddf8a2c4a |
fs: move fiemap range validation into the file systems instances
Replace fiemap_check_flags with a fiemap_prep helper that also takes the inode and mapped range, and performs the sanity check and truncation previously done in fiemap_check_range. This way the validation is inside the file system itself and thus properly works for the stacked overlayfs case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
|
|
Changhee Han
|
5b94ce2fca |
tools/vm/page_owner_sort.c: filter out unneeded line
To see a sorted result from page_owner, there must be a tiresome preprocessing step before running page_owner_sort. This patch simply filters out lines which start with "PFN" while reading the page owner report. Signed-off-by: Changhee Han <ch0.han@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/20200429052940.16968-1-ch0.han@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
c843966c55 |
mm: allow swappiness that prefers reclaiming anon over the file workingset
With the advent of fast random IO devices (SSDs, PMEM) and in-memory swap devices such as zswap, it's possible for swap to be much faster than filesystems, and for swapping to be preferable over thrashing filesystem caches. Allow setting swappiness - which defines the rough relative IO cost of cache misses between page cache and swap-backed pages - to reflect such situations by making the swap-preferred range configurable. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Link: http://lkml.kernel.org/r/20200520232525.798933-4-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alex Shi
|
0a27cae138 |
mm: memcontrol: document the new swap control behavior
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-18-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mike Kravetz
|
282f421438 |
hugetlbfs: clean up command line processing
With all hugetlb page processing done in a single file clean up code.
- Make code match desired semantics
- Update documentation with semantics
- Make all warnings and errors messages start with 'HugeTLB:'.
- Consistently name command line parsing routines.
- Warn if !hugepages_supported() and command line parameters have
been specified.
- Add comments to code
- Describe some of the subtle interactions
- Describe semantics of command line arguments
This patch also fixes issues with implicitly setting the number of
gigantic huge pages to preallocate. Previously on X86 command line,
hugepages=2 default_hugepagesz=1G
would result in zero 1G pages being preallocated and,
# grep HugePages_Total /proc/meminfo
HugePages_Total: 0
# sysctl -a | grep nr_hugepages
vm.nr_hugepages = 2
vm.nr_hugepages_mempolicy = 2
# cat /proc/sys/vm/nr_hugepages
2
After this patch 2 gigantic pages will be preallocated and all the proc,
sysfs, sysctl and meminfo files will accurately reflect this.
To address the issue with gigantic pages, a small change in behavior was
made to command line processing. Previously the command line,
hugepages=128 default_hugepagesz=2M hugepagesz=2M hugepages=256
would result in the allocation of 256 2M huge pages. The value 128 would
be ignored without any warning. After this patch, 128 2M pages will be
allocated and a warning message will be displayed indicating the value of
256 is ignored. This change in behavior is required because allocation of
implicitly specified gigantic pages must be done when the
default_hugepagesz= is encountered for gigantic pages. Previously the
code waited until later in the boot process (hugetlb_init), to allocate
pages of default size. However the bootmem allocator required for
gigantic allocations is not available at this time.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Longpeng <longpeng2@huawei.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200417185049.275845-5-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Kirill A. Shutemov
|
71a2c112a0 |
khugepaged: introduce 'max_ptes_shared' tunable
'max_ptes_shared' specifies how many pages can be shared across multiple processes. Exceeding the number would block the collapse:: /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_shared A higher value may increase memory footprint for some workloads. By default, at least half of pages has to be not shared. [colin.king@canonical.com: fix several spelling mistakes] Link: http://lkml.kernel.org/r/20200420084241.65433-1-colin.king@canonical.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: http://lkml.kernel.org/r/20200416160026.16538-9-kirill.shutemov@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Daniel Jordan
|
ec3b39c731 |
padata: document multithreaded jobs
Add Documentation for multithreaded jobs. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Josh Triplett <josh@joshtriplett.org> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Robert Elliott <elliott@hpe.com> Cc: Shile Zhang <shile.zhang@linux.alibaba.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Link: http://lkml.kernel.org/r/20200527173608.2885243-9-daniel.m.jordan@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mike Rapoport
|
237e506cd5 |
docs/vm: update memory-models documentation
To reflect the updates to free_area_init() family of functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-22-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mike Rapoport
|
3f08a302f5 |
mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option
CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Hoan Tran <hoan@os.amperecomputing.com> [arm64] Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Baoquan He <bhe@redhat.com> Cc: Brian Cain <bcain@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Tom Zanussi
|
daceabf1b4 |
tracing/doc: Fix ascii-art in histogram-design.rst
This fixes the Sphinx parallel build error when building htmldocs: docutils.utils.SystemMessage: /home/sfr/next/next/Documentation/trace/histogram-design.rst:219: (SEVERE/4) Unexpected section title. It also fixes a bunch of other warnings I noticed when fixing the above, caused by mixing ascii-art and text. Link: https://lkml.kernel.org/r/69c291c76964642a417e5dd170d183ba6b552010.camel@kernel.org Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Linus Torvalds
|
cb8e59cc87 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
|
Linus Torvalds
|
039aeb9deb |
ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
|
|
|
周琰杰 (Zhou Yanjie)
|
8211d1e83a |
dt-bindings: clock: Add documentation for X1830 bindings.
Add documentation for the clock bindings of the X1830 Soc from Ingenic. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Linus Torvalds
|
f1e455352b |
kgdb patches for 5.8-rc1
By far the biggest change in this cycle are the changes that allow much earlier debug of systems that are hooked up via UART by taking advantage of the earlycon framework to implement the kgdb I/O hooks before handing over to the regular polling I/O drivers once they are available. When discussing Doug's work we also found and fixed an broken raw_smp_processor_id() sequence in in_dbg_master(). Also included are a collection of much smaller fixes and tweaks: a couple of tweaks to ged rid of doc gen or coccicheck warnings, future proof some internal calculations that made implicit power-of-2 assumptions and eliminate some rather weird handling of magic environment variables in kdb. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAl7WfPsACgkQfOMlXTn3 iKGhvBAAmalPhPvJ74djkSfSuz+fNVgjer5wKGQNhz4lSd+0W3lCkY8T2fkUIpL5 jR3Q0gzJSA2WMSA7RrIwegDt0kCiQI0rtRKDkQxo33HBVSLlh2p5oXg7P5lQ4uOi QZyPI176V1KncFZjPKK2HzhTjoPNlx8GqVys6PBQETvTvxKR3f9qoq5qOKl/f9kQ Q4Dzb/npl6/XGJnQfdnkRcrXXtlK08yRxfXQyBEv0X6U9PUe1xmEZb1i9WBrrOYv u6N94fy2z6vqRgnbv4F6FTiQEHR1VFW2nPGpJ6GFv3KGFpT4QSWuyqTjm1Biee2y Gjn5ACAhW6tdPL+tCK3MRNGih7MaKoR01SnXz5D4T9V1zFTOhW7vyw+t3zoLfR7R fJoymQWKyfWbtj0Do8POiF31V+hvGVuqhzG/lTpnynSRJL38x4il6sFmtuRxMW+8 vyxaetrPX+omf+fq1ueYTJS5Y5bl1Zp3avajD3VPXq2Vq2m4zl++AOlzTOJDF5A+ P9RbwfWJh5Tm3VdCCWv849IDCK3R15DjoNLsuJkNRzqAYrJMVjA/QWyIAT14KR3z Nx3ix/QVKFkNnP5g1N38i2AvWRWZ/QuAmAFRgsmgnYPapeeX4EPtgdmqnloV9AAx CgO7KgUJF4LSIKTfoeWNJ4mpgSVR8zxkOR9w6DX0EQHDbfwlx8o= =uLAB -----END PGP SIGNATURE----- Merge tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "By far the biggest change in this cycle are the changes that allow much earlier debug of systems that are hooked up via UART by taking advantage of the earlycon framework to implement the kgdb I/O hooks before handing over to the regular polling I/O drivers once they are available. When discussing Doug's work we also found and fixed an broken raw_smp_processor_id() sequence in in_dbg_master(). Also included are a collection of much smaller fixes and tweaks: a couple of tweaks to ged rid of doc gen or coccicheck warnings, future proof some internal calculations that made implicit power-of-2 assumptions and eliminate some rather weird handling of magic environment variables in kdb" * tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Remove the misfeature 'KDBFLAGS' kdb: Cleanup math with KDB_CMD_HISTORY_COUNT serial: amba-pl011: Support kgdboc_earlycon serial: 8250_early: Support kgdboc_earlycon serial: qcom_geni_serial: Support kgdboc_earlycon serial: kgdboc: Allow earlycon initialization to be deferred Documentation: kgdboc: Document new kgdboc_earlycon parameter kgdb: Don't call the deinit under spinlock kgdboc: Disable all the early code when kgdboc is a module kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles kgdboc: Remove useless #ifdef CONFIG_KGDB_SERIAL_CONSOLE in kgdboc kgdb: Prevent infinite recursive entries to the debugger kgdb: Delay "kgdbwait" to dbg_late_init() by default kgdboc: Use a platform device to handle tty drivers showing up late Revert "kgdboc: disable the console lock when in kgdb" kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb kgdb: Return true in kgdb_nmi_poll_knock() kgdb: Drop malformed kernel doc comment kgdb: Fix spurious true from in_dbg_master() |
|
|
Tali Perry
|
cd020be04b |
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
Added device tree binding documentation for Nuvoton BMC NPCM I2C controller. Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Linus Torvalds
|
8226f11318 |
MIPS updates for v5.8:
- added support for MIPSr5 and P5600 cores - converted Loongson PCI driver into a PCI host driver using the generic PCI framework - added emulation of CPUCFG command for Loogonson64 cpus - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA - ioremap cleanup - fix for a race between two threads faulting the same page - various cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl7WK54aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAbjA/9EEFeqNg9UNUH6/TS18QV qkxKp0+LC4Jk+SduzLyYsYy6l/dSaKYl8m9jyJsWjM6BvBZTcMJJOnzIPRafI0s+ MK8GCSZunAkm25DsDvfobQUkbQ/UHjY/fuRpNslbDcsYqIKv90hUMd21ccXY6KC5 RY+aMlpjgksg1X8JJ7k1Rs05sXyUPqpESteyqehF1b/+Iyv7H2L3v5EvQwvPDs6f TyVgNJU2B3RCU6/uAcWmHdVLxXd+Y8fM0vC8DCO0pg0rGf4be0FbZztHmeq6r2wy g7wsO7acKWGzulFQD5ftVSQ6i8KHIDNDePmDMtU5oFcXkzUDdGvd3j3Gst19/nve ZftNmQHOY1JqGUOhdq1fDG/4M3Vc5bvh3W6eMG22TuMLEWsOF8teY8uUa/vxOb+B 2NsJ9q6ylRS7RDWWOrApJWfFYPvhr5wlLxT+azWNa9y3bjV8vDLjNdU0mRLA1nsu yLzYMwIhtWfZhkJZ+xJVSmQ6LjAHDN5TF/LEx/9itLg5t9wrEosFPAtOv8V15hy4 KBNvvWeoy7RRmBTNuKh7r9Ui4jw7GgxL4D1OwzCsF//GAiGyuuh0zMuUE8EXA6K5 MpdGt+bSOcLl8ILTtGir8e4MXLawDH8n94f8QWLb9FcOvU4KHUjRKU7EQ6dyD5dk a7xskGLXWdVO3IJ/Xvxcaeo= =eAtN -----END PGP SIGNATURE----- Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for MIPSr5 and P5600 cores - converted Loongson PCI driver into a PCI host driver using the generic PCI framework - added emulation of CPUCFG command for Loogonson64 cpus - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA - ioremap cleanup - fix for a race between two threads faulting the same page - various cleanups and fixes * tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits) MIPS: ralink: drop ralink_clk_init for mt7621 MIPS: ralink: bootrom: mark a function as __init to save some memory MIPS: Loongson64: Reorder CPUCFG model match arms MIPS: Expose Loongson CPUCFG availability via HWCAP MIPS: Loongson64: Guard against future cores without CPUCFG MIPS: Fix build warning about "PTR_STR" redefinition MIPS: Loongson64: Remove not used pci.c MIPS: Loongson64: Define PCI_IOBASE MIPS: CPU_LOONGSON2EF need software to maintain cache consistency MIPS: DTS: Fix build errors used with various configs MIPS: Loongson64: select NO_EXCEPT_FILL MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe() MIPS: mm: add page valid judgement in function pte_modify mm/memory.c: Add memory read privilege on page fault handling mm/memory.c: Update local TLB if PTE entry exists MIPS: Do not flush tlb page when updating PTE entry MIPS: ingenic: Default to a generic board MIPS: ingenic: Add support for GCW Zero prototype MIPS: ingenic: DTS: Add memory info of GCW Zero MIPS: Loongson64: Switch to generic PCI driver ... |
|
|
Linus Torvalds
|
f6aee505c7 |
X86 timer specific updates:
- Add TPAUSE based delay which allows the CPU to enter an optimized power
state while waiting for the delay to pass. The delay is based on TSC
cycles.
- Add tsc_early_khz command line parameter to workaround the problem that
overclocked CPUs can report the wrong frequency via CPUID.16h which
causes the refined calibration to fail because the delta to the initial
frequency value is too big. With the parameter users can provide an
halfways accurate initial value.
-----BEGIN PGP SIGNATURE-----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=199V
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"X86 timer specific updates:
- Add TPAUSE based delay which allows the CPU to enter an optimized
power state while waiting for the delay to pass. The delay is based
on TSC cycles.
- Add tsc_early_khz command line parameter to workaround the problem
that overclocked CPUs can report the wrong frequency via CPUID.16h
which causes the refined calibration to fail because the delta to
the initial frequency value is too big. With the parameter users
can provide an halfways accurate initial value"
* tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Add tsc_early_khz command line parameter
x86/delay: Introduce TPAUSE delay
x86/delay: Refactor delay_mwaitx() for TPAUSE support
x86/delay: Preparatory code cleanup
|
|
|
Linus Torvalds
|
dabc4df27c |
The truly boring timer and clocksource updates for 5.8:
- Not a single new clocksource or clockevent driver! - Device tree updates for various chips - Fixes and improvements and cleanups all over the place -----BEGIN PGP SIGNATURE----- iQJGBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7WEEkTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZxrD/dy2y712euXcZLgclXXQYLDnlRyqLN2 t/6XMeoVulah8UAHccCL+RjLLDHp2pJl1yGPe730GJe9Jxv9+ZVUtXak0VoIoQbO HpNdNLD/Clq2jv1mgoXh1gb5xnEkQsAWcIFAyH4frB+mWZaOhpwqf51JT6QuwnPf OAq09gGdRogslXKuliEuRgbHL/a6WjC5IG4gzzB/coxYPnjGpBc8eYY+QbISqALD D84KJaNu/rOTwh8fXawBmFz5GwSk6LiGkh+Br/vSodYh3T23SWjVPJRsNX0UVT/S m1tEx2njKBBzmyYjrCU2tF0cwdJ0AduARrCFPB11nrsldp4E36fuoRjs+bW5HZAO JDajzHrPunYMN3pmh/D5Qk4/4v4XpPFluybqaoBIAee9L/8ulNKUMrEmjJHbHe+N 5pSmkUsxciRmRRyjfMK3xD8K1/P/J+dJnCY3qOEbDZ7O4nei7wdemY9awCIRdVWb vJYWZwkbGFEsicEUjGgBSqesWuSg+pJRC896PQboonarZ4DZFEZ3B7sODNIrzb82 78nhJ/IGYNuJ4eL7yrxmNDllCOava4vwV87tedbWgAtguE4sDLljKb/V3abwOAOt ZcNvZLCkMiXKdKKEbVJu/WRtQ+lvO1HNM4yB6S6I4R3kegWZu3zqsUL/xzDhk7O5 lrj0DKbKzUqn =FFm0 -----END PGP SIGNATURE----- Merge tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The truly boring timer and clocksource updates for 5.8: - Not a single new clocksource or clockevent driver! - Device tree updates for various chips - Fixes and improvements and cleanups all over the place" * tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) dt-bindings: timer: Add renesas,em-sti bindings clocksource/drivers/timer-versatile: Clear OF_POPULATED flag clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes clocksource: mips-gic-timer: Register as sched_clock clocksource: dw_apb_timer_of: Fix missing clockevent timers clocksource: dw_apb_timer: Affiliate of-based timer with any CPU clocksource: dw_apb_timer: Make CPU-affiliation being optional dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare() clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect" clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly drivers/clocksource/arm_arch_timer: Remove duplicate error message clocksource/drivers/arc_timer: Remove duplicate error message clocksource/drivers/rda: drop redundant Kconfig dependency clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly ... |
|
|
Linus Torvalds
|
f6606d0c00 |
The generic interrupt departement provides:
- Cleanup of the irq_domain API - Overhaul of the interrupt chip simulator - The usual pile of new interrupt chip drivers - Cleanups, improvements and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7WDy0THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoU8gD/9kxzl/q7oZ0lnsbtORSZ68hZ+n9rwH XkLXZVCqOpXgU0Wbe8TLmSUQfxJeMBhTqI6gxkyLWFduRKBP30ChKHbAcvRV9Xj4 s3sdkypiOgilu3skGRm0cUXDPDrACJW0QzZK0TIxVEou5j51opeM+tWb+pGbr7ao UaKARUsVzcNhYs0K3LoM2NrfXL2NtjPkGM6CE4sx7CaEx73dJyJZHgakleLEAGAo 4ok7A71eB4DHRkeiwAPRLUzaBwGFJT86034+FvFCqwouW0FV40TpKi94Mf+a9IQv H8HFIUwfTCvfsouzmHYUfqalmShUMGqNOU4qbHeKzf2Nf/OASTOPiQ3ejWEWMkr0 IHSjVzIeE+66RyMe2gkEmQnehrWeR9Djc7yZheo03IuO2oP3YQlpXvyA95hN7T1J kZ2MVgjNaB7bxQ6eJyA6/xQxv4EJI0a/jQ0ojd1jnomCyRB7k40s9GU2etDmgr08 lA5z8+n9w1lbPWhaZl0BITE2mNoz/b+W+MTiRgN+CqTEXWK7Ee/otoYnZf5nkJpk 0ixxwMvREFoO9JhnxlfG1knQXmL2mLx5I3TGrz7rpx9Ycgoer1hmDWCdMFQaAADL aVVnw3w8G8cwfqBkBYFHW6hq6228uicutcr22/klXsHnN6OYTHxVRvMb8HP3R7AJ ExGk4kquk9DhCQ== =Pi5h -----END PGP SIGNATURE----- Merge tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The generic interrupt departement provides: - Cleanup of the irq_domain API - Overhaul of the interrupt chip simulator - The usual pile of new interrupt chip drivers - Cleanups, improvements and fixes all over the place" * tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms dt-bindings: interrupt-controller: Add Loongson PCH MSI irqchip: Add Loongson PCH MSI controller dt-bindings: interrupt-controller: Add Loongson PCH PIC irqchip: Add Loongson PCH PIC controller dt-bindings: interrupt-controller: Add Loongson HTVEC irqchip: Add Loongson HyperTransport Vector support genirq: Check irq_data_get_irq_chip() return value before use irqchip/sifive-plic: Improve boot prints for multiple PLIC instances irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map() irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs irqdomain: Allow software nodes for IRQ domain creation irqdomain: Get rid of special treatment for ACPI in __irq_domain_add() irqdomain: Make __irq_domain_add() less OF-dependent iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create() irqchip/gic-v3-its: Balance initial LPI affinity across CPUs irqchip/gic-v3-its: Track LPI distribution on a per CPU basis genirq/irq_sim: Simplify the API irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical users ... |
|
|
Florian Fainelli
|
d4f2b12e6d |
dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
BCM7211 supports wake-up interrupts in the form of optional interrupt lines, one per bank, plus the "all banks" interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200531001101.24945-3-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Florian Fainelli
|
879c93f706 |
dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
Document the brcm,bcm7211-gpio compatible string in the brcm,bcm2835-gpio.txt document. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200531001101.24945-2-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Benjamin Gaignard
|
a45c0ec26d |
dt-bindings: pinctrl: stm32: Add missing interrupts property
Driver use interrupt-parent field so update the bindings to allow it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200513145935.22493-15-benjamin.gaignard@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Farhan Ali
|
d8cac29b1d |
vfio-ccw: Introduce a new CRW region
This region provides a mechanism to pass a Channel Report Word that affect vfio-ccw devices, and needs to be passed to the guest for its awareness and/or processing. The base driver (see crw_collect_info()) provides space for two CRWs, as a subchannel event may have two CRWs chained together (one for the ssid, one for the subchannel). As vfio-ccw will deal with everything at the subchannel level, provide space for a single CRW to be transferred in one shot. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-7-farman@linux.ibm.com> [CH: added padding to ccw_crw_region] Signed-off-by: Cornelia Huck <cohuck@redhat.com> |
|
|
Linus Torvalds
|
f3cdc8ae11 |
for-5.8-tag
-----BEGIN PGP SIGNATURE-----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=qTt8
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- speedup dead root detection during orphan cleanup, eg. when there
are many deleted subvolumes waiting to be cleaned, the trees are
now looked up in radix tree instead of a O(N^2) search
- snapshot creation with inherited qgroup will mark the qgroup
inconsistent, requires a rescan
- send will emit file capabilities after chown, this produces a
stream that does not need postprocessing to set the capabilities
again
- direct io ported to iomap infrastructure, cleaned up and simplified
code, notably removing last use of struct buffer_head in btrfs code
Core changes:
- factor out backreference iteration, to be used by ordinary
backreferences and relocation code
- improved global block reserve utilization
* better logic to serialize requests
* increased maximum available for unlink
* improved handling on large pages (64K)
- direct io cleanups and fixes
* simplify layering, where cloned bios were unnecessarily created
for some cases
* error handling fixes (submit, endio)
* remove repair worker thread, used to avoid deadlocks during
repair
- refactored block group reading code, preparatory work for new type
of block group storage that should improve mount time on large
filesystems
Cleanups:
- cleaned up (and slightly sped up) set/get helpers for metadata data
structure members
- root bit REF_COWS got renamed to SHAREABLE to reflect the that the
blocks of the tree get shared either among subvolumes or with the
relocation trees
Fixes:
- when subvolume deletion fails due to ENOSPC, the filesystem is not
turned read-only
- device scan deals with devices from other filesystems that changed
ownership due to overwrite (mkfs)
- fix a race between scrub and block group removal/allocation
- fix long standing bug of a runaway balance operation, printing the
same line to the syslog, caused by a stale status bit on a reloc
tree that prevented progress
- fix corrupt log due to concurrent fsync of inodes with shared
extents
- fix space underflow for NODATACOW and buffered writes when it for
some reason needs to fallback to COW mode"
* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
btrfs: fix space_info bytes_may_use underflow during space cache writeout
btrfs: fix space_info bytes_may_use underflow after nocow buffered write
btrfs: fix wrong file range cleanup after an error filling dealloc range
btrfs: remove redundant local variable in read_block_for_search
btrfs: open code key_search
btrfs: split btrfs_direct_IO to read and write part
btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
fs: remove dio_end_io()
btrfs: switch to iomap_dio_rw() for dio
iomap: remove lockdep_assert_held()
iomap: add a filesystem hook for direct I/O bio submission
fs: export generic_file_buffered_read()
btrfs: turn space cache writeout failure messages into debug messages
btrfs: include error on messages about failure to write space/inode caches
btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
btrfs: make checksum item extension more efficient
btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
btrfs: unexport btrfs_compress_set_level()
btrfs: simplify iget helpers
...
|
|
|
Linus Torvalds
|
96ed320d52 |
New code for 5.8:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being done
via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and application
programmers can take advantage of the (still experimental DAX) feature.
-----BEGIN PGP SIGNATURE-----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=rS19
-----END PGP SIGNATURE-----
Merge tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull DAX updates part one from Darrick Wong:
"After many years of LKML-wrangling about how to enable programs to
query and influence the file data access mode (DAX) when a filesystem
resides on storage devices such as persistent memory, Ira Weiny has
emerged with a proposed set of standard behaviors that has not been
shot down by anyone! We're more or less standardizing on the current
XFS behavior and adapting ext4 to do the same.
This is the first of a handful pull requests that will make ext4 and
XFS present a consistent interface for user programs that care about
DAX. We add a statx attribute that programs can check to see if DAX is
enabled on a particular file. Then, we update the DAX documentation to
spell out the user-visible behaviors that filesystems will guarantee
(until the next storage industry shakeup). The on-disk inode flag has
been in XFS for a few years now.
Summary:
- Clean up io_is_direct.
- Add a new statx flag to indicate when file data access is being
done via DAX (as opposed to the page cache).
- Update the documentation for how system administrators and
application programmers can take advantage of the (still
experimental DAX) feature"
Link: https://lore.kernel.org/lkml/20200505002016.1085071-1-ira.weiny@intel.com/
* tag 'vfs-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Documentation/dax: Update Usage section
fs/stat: Define DAX statx attribute
fs: Remove unneeded IS_DAX() check in io_is_direct()
|
|
|
Linus Torvalds
|
16d91548d1 |
New code for 5.8:
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean up
other inode flush warts.
- Refactor log recovery so that each log item recovery functions now live
with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks, since
they're just part of the disk format now due to a historic lack of log
atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when quotas
are enabled.
- Refactor inode fork reading and verification to run directly from the
inode-from-disk function. This means that we now actually guarantee
that _iget'ted inodes are totally verified and ready to go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a
stale disk contents exposure vector if the system goes down before
the write completes.
- More lockdep whackamole.
-----BEGIN PGP SIGNATURE-----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=/NYc
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Most of the changes this cycle are refactoring of existing code in
preparation for things landing in the future.
We also fixed various problems and deficiencies in the quota
implementation, and (I hope) the last of the stale read vectors by
forcing write allocations to go through the unwritten state until the
write completes.
Summary:
- Various cleanups to remove dead code, unnecessary conditionals,
asserts, etc.
- Fix a linker warning caused by xfs stuffing '-g' into CFLAGS
redundantly.
- Tighten up our dmesg logging to ensure that everything is prefixed
with 'XFS' for easier grepping.
- Kill a bunch of typedefs.
- Refactor the deferred ops code to reduce indirect function calls.
- Increase type-safety with the deferred ops code.
- Make the DAX mount options a tri-state.
- Fix some error handling problems in the inode flush code and clean
up other inode flush warts.
- Refactor log recovery so that each log item recovery functions now
live with the other log item processing code.
- Fix some SPDX forms.
- Fix quota counter corruption if the fs crashes after running
quotacheck but before any dquots get logged.
- Don't fail metadata verification on zero-entry attr leaf blocks,
since they're just part of the disk format now due to a historic
lack of log atomicity.
- Don't allow SWAPEXT between files with different [ugp]id when
quotas are enabled.
- Refactor inode fork reading and verification to run directly from
the inode-from-disk function. This means that we now actually
guarantee that _iget'ted inodes are totally verified and ready to
go.
- Move the incore inode fork format and extent counts to the ifork
structure.
- Scalability improvements by reducing cacheline pingponging in
struct xfs_mount.
- More scalability improvements by removing m_active_trans from the
hot path.
- Fix inode counter update sanity checking to run /only/ on debug
kernels.
- Fix longstanding inconsistency in what error code we return when a
program hits project quota limits (ENOSPC).
- Fix group quota returning the wrong error code when a program hits
group quota limits.
- Fix per-type quota limits and grace periods for group and project
quotas so that they actually work.
- Allow extension of individual grace periods.
- Refactor the non-reclaim inode radix tree walking code to remove a
bunch of stupid little functions and straighten out the
inconsistent naming schemes.
- Fix a bug in speculative preallocation where we measured a new
allocation based on the last extent mapping in the file instead of
looking farther for the last contiguous space allocation.
- Force delalloc writes to unwritten extents. This closes a stale
disk contents exposure vector if the system goes down before the
write completes.
- More lockdep whackamole"
* tag 'xfs-5.8-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (129 commits)
xfs: more lockdep whackamole with kmem_alloc*
xfs: force writes to delalloc regions to unwritten
xfs: refactor xfs_iomap_prealloc_size
xfs: measure all contiguous previous extents for prealloc size
xfs: don't fail unwritten extent conversion on writeback due to edquot
xfs: rearrange xfs_inode_walk_ag parameters
xfs: straighten out all the naming around incore inode tree walks
xfs: move xfs_inode_ag_iterator to be closer to the perag walking code
xfs: use bool for done in xfs_inode_ag_walk
xfs: fix inode ag walk predicate function return values
xfs: refactor eofb matching into a single helper
xfs: remove __xfs_icache_free_eofblocks
xfs: remove flags argument from xfs_inode_ag_walk
xfs: remove xfs_inode_ag_iterator_flags
xfs: remove unused xfs_inode_ag_iterator function
xfs: replace open-coded XFS_ICI_NO_TAG
xfs: move eofblocks conversion function to xfs_ioctl.c
xfs: allow individual quota grace period extension
xfs: per-type quota timers and warn limits
xfs: switch xfs_get_defquota to take explicit type
...
|
|
|
Max Gurtovoy
|
3a578152a9 |
RDMA/core: Remove FMR device ops
After removing FMR support from all the RDMA ULPs and providers, there is no need to keep FMR operation for IB devices. Link: https://lore.kernel.org/r/11-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
|
|
Max Gurtovoy
|
4e373d5417 |
RDMA/core: Remove FMR pool API
This ancient and unsafe method for memory registration is no longer used by any RDMA based ULP. Remove the FMR pool API from the core driver. Link: https://lore.kernel.org/r/4-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
|
|
Linus Torvalds
|
750a02ab8d |
for-5.8/block-2020-06-01
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl7VOwMQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpoR7EADAlz3TCkb4wwuHytTBDrm6gVDdsJ9zUfQW Cl2ASLtufA8PWZUCEI3vhFyOe6P5e+ZZ0O2HjljSevmHyogCaRYXFYVfbWKcQKuk AcxiTgnYNevh8KbGLfJY1WL4eXsY+C3QUGivg35cCgrx+kr9oDaHMeqA9Tm1plyM FSprDBoSmHPqRxiV/1gnr8uXLX6K7i/fHzwmKgySMhavum7Ma8W3wdAGebzvQwrO SbFSuJVgz06e4B1Fzr/wSvVNUE/qW/KqfGuQKIp7VQFIywbgG7TgRMHjE1FSnpnh gn+BfL+O5gc0sTvcOTGOE0SRWWwLx961WNg8Azq08l3fzsxLA6h8/AnoDf3i+QMA rHmLpWZIic2xPSvjaFHX3/V9ITyGYeAMpAR77EL+4ivWrKv5JrBhnSLDt1fKILdg 5elxm7RDI+C4nCP4xuTlVCy5gCd6gwjgytKj+NUWhNq1WiGAD0B54SSiV+SbCSH6 Om2f5trcxz8E4pqWcf0k3LjFapVKRNV8v/+TmVkCdRPBl3y9P0h0wFTkkcEquqnJ y7Yq6efdWviRCnX5w/r/yj0qBuk4xo5hMVsPmlthCWtnBm+xZQ6LwMRcq4HQgZgR 2SYNscZ3OFMekHssH7DvY4DAy1J+n83ims+KzbScbLg2zCZjh/scQuv38R5Eh9WZ rCS8c+T7Ig== =HYf4 -----END PGP SIGNATURE----- Merge tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: "Core block changes that have been queued up for this release: - Remove dead blk-throttle and blk-wbt code (Guoqing) - Include pid in blktrace note traces (Jan) - Don't spew I/O errors on wouldblock termination (me) - Zone append addition (Johannes, Keith, Damien) - IO accounting improvements (Konstantin, Christoph) - blk-mq hardware map update improvements (Ming) - Scheduler dispatch improvement (Salman) - Inline block encryption support (Satya) - Request map fixes and improvements (Weiping) - blk-iocost tweaks (Tejun) - Fix for timeout failing with error injection (Keith) - Queue re-run fixes (Douglas) - CPU hotplug improvements (Christoph) - Queue entry/exit improvements (Christoph) - Move DMA drain handling to the few drivers that use it (Christoph) - Partition handling cleanups (Christoph)" * tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits) block: mark bio_wouldblock_error() bio with BIO_QUIET blk-wbt: rename __wbt_update_limits to wbt_update_limits blk-wbt: remove wbt_update_limits blk-throttle: remove tg_drain_bios blk-throttle: remove blk_throtl_drain null_blk: force complete for timeout request blk-mq: drain I/O when all CPUs in a hctx are offline blk-mq: add blk_mq_all_tag_iter blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx blk-mq: use BLK_MQ_NO_TAG in more places blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG blk-mq: move more request initialization to blk_mq_rq_ctx_init blk-mq: simplify the blk_mq_get_request calling convention blk-mq: remove the bio argument to ->prepare_request nvme: force complete cancelled requests blk-mq: blk-mq: provide forced completion method block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds block: blk-crypto-fallback: remove redundant initialization of variable err block: reduce part_stat_lock() scope block: use __this_cpu_add() instead of access by smp_processor_id() ... |
|
|
Linus Torvalds
|
faa392181a |
drm pull for 5.8-rc1
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling
-----BEGIN PGP SIGNATURE-----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=H7IS
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- Core DRM had a lot of refactoring around managed drm resources to
make drivers simpler.
- Intel Tigerlake support is on by default
- amdgpu now support p2p PCI buffer sharing and encrypted GPU memory
Details:
core:
- uapi: error out EBUSY when existing master
- uapi: rework SET/DROP MASTER permission handling
- remove drm_pci.h
- drm_pci* are now legacy
- introduced managed DRM resources
- subclassing support for drm_framebuffer
- simple encoder helper
- edid improvements
- vblank + writeback documentation improved
- drm/mm - optimise tree searches
- port drivers to use devm_drm_dev_alloc
dma-buf:
- add flag for p2p buffer support
mst:
- ACT timeout improvements
- remove drm_dp_mst_has_audio
- don't use 2nd TX slot - spec recommends against it
bridge:
- dw-hdmi various improvements
- chrontel ch7033 support
- fix stack issues with old gcc
hdmi:
- add unpack function for drm infoframe
fbdev:
- misc fbdev driver fixes
i915:
- uapi: global sseu pinning
- uapi: OA buffer polling
- uapi: remove generated perf code
- uapi: per-engine default property values in sysfs
- Tigerlake GEN12 enabled.
- Lots of gem refactoring
- Tigerlake enablement patches
- move to drm_device logging
- Icelake gamma HW readout
- push MST link retrain to hotplug work
- bandwidth atomic helpers
- ICL fixes
- RPS/GT refactoring
- Cherryview full-ppgtt support
- i915 locking guidelines documented
- require linear fb stride to be 512 multiple on gen9
- Tigerlake SAGV support
amdgpu:
- uapi: encrypted GPU memory handling
- uapi: add MEM_SYNC IB flag
- p2p dma-buf support
- export VRAM dma-bufs
- FRU chip access support
- RAS/SR-IOV updates
- Powerplay locking fixes
- VCN DPG (powergating) enablement
- GFX10 clockgating fixes
- DC fixes
- GPU reset fixes
- navi SDMA fix
- expose FP16 for modesetting
- DP 1.4 compliance fixes
- gfx10 soft recovery
- Improved Critical Thermal Faults handling
- resizable BAR on gmc10
amdkfd:
- uapi: GWS resource management
- track GPU memory per process
- report PCI domain in topology
radeon:
- safe reg list generator fixes
nouveau:
- HD audio fixes on recent systems
- vGPU detection (fail probe if we're on one, for now)
- Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
- SVM improvements/fixes
- NVIDIA format modifier support
- Misc other fixes.
adv7511:
- HDMI SPDIF support
ast:
- allocate crtc state size
- fix double assignment
- fix suspend
bochs:
- drop connector register
cirrus:
- move to tiny drivers.
exynos:
- fix imported dma-buf mapping
- enable runtime PM
- fixes and cleanups
mediatek:
- DPI pin mode swap
- config mipi_tx current/impedance
lima:
- devfreq + cooling device support
- task handling improvements
- runtime PM support
pl111:
- vexpress init improvements
- fix module auto-load
rcar-du:
- DT bindings conversion to YAML
- Planes zpos sanity check and fix
- MAINTAINERS entry for LVDS panel driver
mcde:
- fix return value
mgag200:
- use managed config init
stm:
- read endpoints from DT
vboxvideo:
- use PCI managed functions
- drop WC mtrr
vkms:
- enable cursor by default
rockchip:
- afbc support
virtio:
- various cleanups
qxl:
- fix cursor notify port
hisilicon:
- 128-byte stride alignment fix
sun4i:
- improved format handling"
* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
drm/amd/display: Fix potential integer wraparound resulting in a hang
drm/amd/display: drop cursor position check in atomic test
drm/amdgpu: fix device attribute node create failed with multi gpu
drm/nouveau: use correct conflicting framebuffer API
drm/vblank: Fix -Wformat compile warnings on some arches
drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
drm/amd/display: Handle GPU reset for DC block
drm/amdgpu: add apu flags (v2)
drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
drm/amdgpu: fix pm sysfs node handling (v2)
drm/amdgpu: move gpu_info parsing after common early init
drm/amdgpu: move discovery gfx config fetching
drm/nouveau/dispnv50: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau: fix runtime pm imbalance on error
drm/nouveau/debugfs: fix runtime pm imbalance on error
drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
...
|
|
|
Linus Torvalds
|
cfa3b8068b |
hmm related patches for 5.8
This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification for
hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl7VQr8ACgkQOG33FX4g
mxrpcg/+O+oZ2p8FDTZi/0BTaU0crUiKwJngmmv78UuvD8nzhOZ0fkhK2lsXn9Uo
70lYbfDUSX2TbReP7y39VArW0v+Bj7wo9/7AZ+R2o5A0ajC6kccjGdnb7uEc3L6v
CR+uumRYf/ZNz13cbuRBbYEz477DGnz+3vhBb4FLNTFj9XiNAC61jA1WUI0ep6x3
lDrkhDatqmdBJ+EqZDMq2+UH+lWbkptQT7hPqgEp6o7FqdnySxRd+rT3hALz5wNP
fbryfWXM7V1eh7Kxr2mBJJqIkgbdhGLj2yLl1Iz11BbG6u7AT20r23WTvJ7hUCyt
18574twdltZ81gheqqN7KVYYAo+5seMfP14QdthqzzBMo3pOeLG0JMVqQNisDPgn
Tf4lWF/GR7ajKxyRbLdvUgRE7pFQ9VMAiP86GoIpBFmSZQQDwcecnoYxg60zsTwR
yuf60gopfNsSWNmDqKT3td12PQyFQYHYT6ue1eW6Rb9P+yA++tZaGkvGFn7kHeNV
ZeUqsKEy6a9l6cDrFzNmsCcdNZg/qmw9mKFfa/4RRulU5jlskt/e52NiLaLU2rsr
0Tot3j5tMufLLorZPprMI3Z/M9ohVAS5DkX6ttcZDs5v0iGQEUOOnq0cXmwlJQ9I
0CHr2ImjiDr9v2fS+5ixaRNSHfnQWnHxcqq79UZiTjtPW1Daauo=
=twev
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This series adds a selftest for hmm_range_fault() and several of the
DEVICE_PRIVATE migration related actions, and another simplification
for hmm_range_fault()'s API.
- Simplify hmm_range_fault() with a simpler return code, no
HMM_PFN_SPECIAL, and no customizable output PFN format
- Add a selftest for hmm_range_fault() and DEVICE_PRIVATE related
functionality"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: add HMM selftests
mm/hmm/test: add selftests for HMM
mm/hmm/test: add selftest driver for HMM
mm/hmm: remove the customizable pfn format from hmm_range_fault
mm/hmm: remove HMM_PFN_SPECIAL
drm/amdgpu: remove dead code after hmm_range_fault()
mm/hmm: make hmm_range_fault return 0 or -1
|
|
|
Linus Torvalds
|
118d6e9829 |
ACPI updates for 5.8-rc1
- Update the ACPICA code in the kernel to upstream revision
20200430:
* Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
* Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
* Add status checks to the dispatcher (Erik Kaneda).
* Fix required parameters for _NIG and _NIH (Erik Kaneda).
* Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with
only one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two
places (Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei).
-----BEGIN PGP SIGNATURE-----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=xH3i
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20200430, fix several reference counting errors related to ACPI
tables, add _Exx / _Lxx support to the GED driver, add a new
acpi_evaluate_reg() helper, add new DPTF battery participant driver
and extend the DPFT power participant driver, improve the handling of
memory failures in the APEI code, add a blacklist entry to the
backlight driver, update the PMIC driver and the processor idle
driver, fix two kobject reference count leaks, and make a few janitory
changes.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200430:
- Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
- Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
create operators (Erik Kaneda).
- Add status checks to the dispatcher (Erik Kaneda).
- Fix required parameters for _NIG and _NIH (Erik Kaneda).
- Make acpi_protocol_lengths static (Yue Haibing).
- Fix ACPI table reference counting errors in several places, mostly
in error code paths (Hanjun Guo).
- Extend the Generic Event Device (GED) driver to support _Exx and
_Lxx handler methods (Ard Biesheuvel).
- Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
code to use it (Hans de Goede).
- Add new DPTF battery participant driver and make the DPFT power
participant driver create more sysfs device attributes (Srinivas
Pandruvada).
- Improve the handling of memory failures in APEI (James Morse).
- Add new blacklist entry for Acer TravelMate 5735Z to the backlight
driver (Paul Menzel).
- Add i2c address for thermal control to the PMIC driver (Mauro
Carvalho Chehab).
- Allow the ACPI processor idle driver to work on platforms with only
one ACPI C-state present (Zhang Rui).
- Fix kobject reference count leaks in error code paths in two places
(Qiushi Wu).
- Delete unused proc filename macros and make some symbols static
(Pascal Terjan, Zheng Zengkai, Zou Wei)"
* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
ACPI: DPTF: Add battery participant driver
ACPI: DPTF: Additional sysfs attributes for power participant driver
ACPI: video: Use native backlight on Acer TravelMate 5735Z
arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
ACPI: APEI: Kick the memory_failure() queue for synchronous errors
mm/memory-failure: Add memory_failure_queue_kick()
ACPI / PMIC: Add i2c address for thermal control
ACPI: GED: add support for _Exx / _Lxx handler methods
ACPI: Delete unused proc filename macros
ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
ACPI: utils: Add acpi_evaluate_reg() helper
ACPI: debug: Make two functions static
ACPI: sleep: Put the FACS table after using it
ACPI: scan: Put SPCR and STAO table after using it
ACPI: EC: Put the ACPI table after using it
ACPI: APEI: Put the HEST table for error path
ACPI: APEI: Put the error record serialization table for error path
...
|
|
|
Linus Torvalds
|
355ba37d75 |
Power management updates for 5.8-rc1
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
|
|
|
Linus Torvalds
|
a5a82e0a59 |
platform-drivers-x86 for v5.8-1
* Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
* ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA
* Big refactoring of Intel SCU driver with Elkhart Lake support has been added
* Slim Bootloarder firmware update signaling WMI driver has been added
* Thinkpad ACPI driver can handle dual fan configuration on new P and X models
* Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
* Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models
* Intel Speed Select tools update
* Plenty of small cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- replace space by * in modalias
New drivers:
- Add Elkhart Lake SCU/PMC support
- Add Slim Bootloader firmware update signaling driver
asus-laptop:
- Drop duplicate check for led_classdev_unregister()
asus-nb-wmi:
- Revert "Do not load on Asus T100TA and T200TA"
- Do not load on Asus T100TA and T200TA
asus-wmi:
- Ignore WMI events with code 0x79
- Add support for SW_TABLET_MODE
- Move asus_wmi_input_init and _exit lower in the file
- Drop duplicate check for led_classdev_unregister()
- Reserve more space for struct bias_args
- remove redundant initialization of variable status
dcdbas:
- Check SMBIOS for protected buffer address
dell-laptop:
- don't register micmute LED if there is no token
dell-wmi:
- Ignore keyboard attached / detached events
device property:
- export set_secondary_fwnode() to modules
eeepc-laptop:
- Drop duplicate check for led_classdev_unregister()
hp-wmi:
- Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
- Convert simple_strtoul() to kstrtou32()
- Refactor postcode_store() to follow standard patterns
intel_cht_int33fe:
- Fix spelling issues
- Switch to use acpi_dev_hid_uid_match()
- Convert to use set_secondary_fwnode()
- Convert software node array to group
intel-hid:
- Add a quirk to support HP Spectre X2 (2015)
intel_mid_powerbtn:
- Convert to use new SCU IPC API
intel_pmc_core:
- avoid unused-function warnings
- Change Jasper Lake S0ix debug reg map back to ICL
intel_pmc_ipc:
- Convert to MFD
- Move PCI IDs to intel_scu_pcidrv.c
- Drop intel_pmc_ipc_command()
- Start using SCU IPC
intel_scu_ipc:
- Add managed function to register SCU IPC
- Introduce new SCU IPC API
- Move legacy SCU IPC API to a separate header
- Log more information if SCU IPC command fails
- Split out SCU IPC functionality from the SCU driver
intel_scu_ipcutil:
- Convert to use new SCU IPC API
intel-speed-select:
- Fix speed-select-base-freq-properties output on CLX-N
intel_telemetry:
- Add telemetry_get_pltdata()
- Convert to use new SCU IPC API
intel-vbtn:
- Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
- Detect switch position before registering the input-device
- Move detect_tablet_mode() to higher in the file
- Fix probe failure on devices with only switches
- Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types
- Do not advertise switches to userspace if they are not there
- Split keymap into buttons and switches parts
- Use acpi_evaluate_integer()
ISST:
- Increase timeout
lg-laptop:
- Drop duplicate check for led_classdev_unregister()
MAINTAINERS:
- Add me as maintainer of Intel SCU drivers
- Update entry for Intel Broxton PMC driver
Merges of immutable branches:
- Merge branch 'for-next'
- Merge branch 'ib-mfd-x86-usb-watchdog-v5.7'
- Merge branch 'ib-pdx86-properties'
mfd:
- intel_soc_pmic_mrfld: Convert to use new SCU IPC API
- intel_soc_pmic_bxtwc: Convert to use new SCU IPC API
- intel_soc_pmic: Add SCU IPC member to struct intel_soc_pmic
samsung-laptop:
- Drop duplicate check for led_classdev_unregister()
software node:
- Allow register and unregister software node groups
sony-laptop:
- Make resuming thermal profile safer
- SNC calls should handle BUFFER types
thinkpad_acpi:
- Replace custom approach by kstrtoint()
- Use strndup_user() in dispatch_proc_write()
- Replace next_cmd(&buf) with strsep(&buf, ",")
- Drop duplicate check for led_classdev_unregister()
- Remove always false 'value < 0' statement
- Add support for dual fan control
tools/power/x86/intel-speed-select:
- Fix invalid core mask
- Increase CPU count
- Fix json perf-profile output output
- Update version
- Enable clos for turbo-freq enable
- Fix CLX-N package information output
- Check support status before enable
- Change debug to error
toshiba_acpi:
- Drop duplicate check for led_classdev_unregister()
touchscreen_dmi:
- Update Trekstor Twin 10.1 entry
- Add info for the Trekstor Yourbook C11B
- Drop comma in terminator line
- add Vinga J116 touchscreen
- Add info for the ONDA V891 v5 tablet
- Add touchscreen info for techBite Arc 11.6.
- Add info for the MP-man MPWIN895CL tablet
usb:
- typec: mux: Convert the Intel PMC Mux driver to use new SCU IPC API
watchdog:
- iTCO: fix link error
- intel-mid_wdt: Convert to use new SCU IPC API
wmi:
- Describe function parameters
- Fix indentation in some cases
- Replace UUID redefinitions by their originals
x86/platform/intel-mid:
- Add empty stubs for intel_scu_devices_[create|destroy]()
-----BEGIN PGP SIGNATURE-----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=pprB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Add a support of the media keys on the ASUS laptop UX325JA/UX425JA
- ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA,
T200TA
- Big refactoring of Intel SCU driver with Elkhart Lake support has
been added
- Slim Bootloarder firmware update signaling WMI driver has been added
- Thinkpad ACPI driver can handle dual fan configuration on new P and X
models
- Touchscreen DMI driver has been extended to support
- MP-man MPWIN895CL tablet
- ONDA V891 v5 tablet
- techBite Arc 11.6
- Trekstor Twin 10.1
- Trekstor Yourbook C11B
- Vinga J116
- Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet
models
- Intel Speed Select tools update
- Plenty of small cleanups here and there
* tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits)
platform/x86: dcdbas: Check SMBIOS for protected buffer address
platform/x86: asus_wmi: Reserve more space for struct bias_args
platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type
platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)
platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry
platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B
platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut
platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()
platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns
platform/x86: acerhdf: replace space by * in modalias
platform/x86: ISST: Increase timeout
tools/power/x86/intel-speed-select: Fix invalid core mask
tools/power/x86/intel-speed-select: Increase CPU count
tools/power/x86/intel-speed-select: Fix json perf-profile output output
platform/x86: dell-wmi: Ignore keyboard attached / detached events
platform/x86: dell-laptop: don't register micmute LED if there is no token
platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint()
platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()
platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",")
platform/x86: intel-vbtn: Detect switch position before registering the input-device
...
|
|
|
Linus Torvalds
|
c5d6c13843 |
MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update.
-----BEGIN PGP SIGNATURE-----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=1bkc
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update"
* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
dt-bindings: mmc: Convert sdhci-pxa to json-schema
mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
mmc: core: Export device/vendor ids from Common CIS for SDIO cards
mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
mmc: sdhci-of-at91: fix CALCR register being rewritten
mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
mmc: sdhci-esdhc-imx: fix the mask for tuning start point
mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
mmc: mmci_sdmmc: fix DMA API warning max segment size
mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
mmc: sdhci-of-arasan: Add support for Intel Keem Bay
dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
mmc: sdhci-cadence: fix PHY write
mmc: sdio: Sort all SDIO IDs in common include file
mmc: sdio: Fix Cypress SDIO IDs macros in common include file
mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
mmc: sdio: Move SDIO IDs from ath10k driver to common include file
mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
mmc: sdio: Move SDIO IDs from smssdio driver to common include file
mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
...
|
|
|
Linus Torvalds
|
94709049fb |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: "A few little subsystems and a start of a lot of MM patches. Subsystems affected by this patch series: squashfs, ocfs2, parisc, vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup, swap, memcg, pagemap, memory-failure, vmalloc, kasan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) kasan: move kasan_report() into report.c mm/mm_init.c: report kasan-tag information stored in page->flags ubsan: entirely disable alignment checks under UBSAN_TRAP kasan: fix clang compilation warning due to stack protector x86/mm: remove vmalloc faulting mm: remove vmalloc_sync_(un)mappings() x86/mm/32: implement arch_sync_kernel_mappings() x86/mm/64: implement arch_sync_kernel_mappings() mm/ioremap: track which page-table levels were modified mm/vmalloc: track which page-table levels were modified mm: add functions to track page directory modifications s390: use __vmalloc_node in stack_alloc powerpc: use __vmalloc_node in alloc_vm_stack arm64: use __vmalloc_node in arch_alloc_vmap_stack mm: remove vmalloc_user_node_flags mm: switch the test_vmalloc module to use __vmalloc_node mm: remove __vmalloc_node_flags_caller mm: remove both instances of __vmalloc_node_flags mm: remove the prot argument to __vmalloc_node mm: remove the pgprot argument to __vmalloc ... |
|
|
Christoph Hellwig
|
ed1f324c5f |
mm: remove map_vm_range
Switch all callers to map_kernel_range, which symmetric to the unmap side (as well as the _noflush versions). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Gao Xiang <xiang@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-17-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Jakub Kicinski
|
4b82ab4f28 |
mm/memcg: automatically penalize tasks with high swap use
Add a memory.swap.high knob, which can be used to protect the system from SWAP exhaustion. The mechanism used for penalizing is similar to memory.high penalty (sleep on return to user space). That is not to say that the knob itself is equivalent to memory.high. The objective is more to protect the system from potentially buggy tasks consuming a lot of swap and impacting other tasks, or even bringing the whole system to stand still with complete SWAP exhaustion. Hopefully without the need to find per-task hard limits. Slowing misbehaving tasks down gradually allows user space oom killers or other protection mechanisms to react. oomd and earlyoom already do killing based on swap exhaustion, and memory.swap.high protection will help implement such userspace oom policies more reliably. We can use one counter for number of pages allocated under pressure to save struct task space and avoid two separate hierarchy walks on the hot path. The exact overage is calculated on return to user space, anyway. Take the new high limit into account when determining if swap is "full". Borrowing the explanation from Johannes: The idea behind "swap full" is that as long as the workload has plenty of swap space available and it's not changing its memory contents, it makes sense to generously hold on to copies of data in the swap device, even after the swapin. A later reclaim cycle can drop the page without any IO. Trading disk space for IO. But the only two ways to reclaim a swap slot is when they're faulted in and the references go away, or by scanning the virtual address space like swapoff does - which is very expensive (one could argue it's too expensive even for swapoff, it's often more practical to just reboot). So at some point in the fill level, we have to start freeing up swap slots on fault/swapin. Otherwise we could eventually run out of swap slots while they're filled with copies of data that is also in RAM. We don't want to OOM a workload because its available swap space is filled with redundant cache. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Chris Down <chris@chrisdown.name> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Link: http://lkml.kernel.org/r/20200527195846.102707-5-kuba@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yafang Shao
|
a6f5576bb1 |
mm, memcg: add workingset_restore in memory.stat
There's a new workingset counter introduced in commit
|
|
|
NeilBrown
|
8d92890bd6 |
mm/writeback: discard NR_UNSTABLE_NFS, use NR_WRITEBACK instead
After an NFS page has been written it is considered "unstable" until a
COMMIT request succeeds. If the COMMIT fails, the page will be
re-written.
These "unstable" pages are currently accounted as "reclaimable", either
in WB_RECLAIMABLE, or in NR_UNSTABLE_NFS which is included in a
'reclaimable' count. This might have made sense when sending the COMMIT
required a separate action by the VFS/MM (e.g. releasepage() used to
send a COMMIT). However now that all writes generated by ->writepages()
will automatically be followed by a COMMIT (since commit
|
|
|
Matthew Wilcox (Oracle)
|
8151b4c8be |
mm: add readahead address space operation
This replaces ->readpages with a saner interface: - Return void instead of an ignored error code. - Page cache is already populated with locked pages when ->readahead is called. - New arguments can be passed to the implementation without changing all the filesystems that use a common helper function like mpage_readahead(). Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Gao Xiang <gaoxiang25@huawei.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Link: http://lkml.kernel.org/r/20200414150233.24495-12-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Andrew Morton
|
a3df69278c |
Documentation/vm/slub.rst: s/Toggle/Enable/
"toggle" means to change a boolean thing's state. This operation doesn't do that - it sets it to "true". Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mauro Carvalho Chehab
|
3700bec332 |
docs: filesystems: convert gfs2-glocks.txt to ReST
- Add a SPDX header; - Adjust document and section titles; - Some whitespace fixes and new line breaks; - Add table markups; - Use notes markups; - Add it to filesystems/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> |
|
|
Ben Boeckel
|
352780b61e |
Documentation: security: core.rst: add missing argument
This argument was just never documented in the first place. Signed-off-by: Ben Boeckel <mathstuf@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> |
|
|
Douglas Anderson
|
f71fc3bc7b |
Documentation: kgdboc: Document new kgdboc_earlycon parameter
The recent patch ("kgdboc: Add kgdboc_earlycon to support early kgdb
using boot consoles") adds a new kernel command line parameter.
Document it.
Note that the patch adding the feature does some comparing/contrasting
of "kgdboc_earlycon" vs. the existing "ekgdboc". See that patch for
more details, but briefly "ekgdboc" can be used _instead_ of "kgdboc"
and just makes "kgdboc" do its normal initialization early (only works
if your tty driver is already ready). The new "kgdboc_earlycon" works
in combination with "kgdboc" and is backed by boot consoles.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.9.I7d5eb42c6180c831d47aef1af44d0b8be3fac559@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
|
Farhan Ali
|
24c986748b |
vfio-ccw: Introduce a new schib region
The schib region can be used by userspace to get the subchannel- information block (SCHIB) for the passthrough subchannel. This can be useful to get information such as channel path information via the SCHIB.PMCW fields. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-5-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> |
|
|
Cornelia Huck
|
430220b0bb |
vfio-ccw: document possible errors
Interacting with the I/O and the async regions can yield a number of errors, which had been undocumented so far. These are part of the api, so remedy that. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20200407111605.1795-1-cohuck@redhat.com> |
|
|
Jared Rossi
|
725b94d741 |
vfio-ccw: Enable transparent CCW IPL from DASD
Remove the explicit prefetch check when using vfio-ccw devices. This check does not trigger in practice as all Linux channel programs are intended to use prefetch. It is expected that all ORBs issued by Linux will request prefetch. Although non-prefetching ORBs are not rejected, they will prefetch nonetheless. A warning is issued up to once per 5 seconds when a forced prefetch occurs. A non-prefetch ORB does not necessarily result in an error, however frequent encounters with non-prefetch ORBs indicate that channel programs are being executed in a way that is inconsistent with what the guest is requesting. While there is currently no known case of an error caused by forced prefetch, it is possible in theory that forced prefetch could result in an error if applied to a channel program that is dependent on non-prefetch. Signed-off-by: Jared Rossi <jrossi@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20200506212440.31323-2-jrossi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> |
|
|
Joerg Roedel
|
cc69fc4861 | Merge branches 'arm/msm', 'arm/allwinner', 'arm/smmu', 'x86/vt-d', 'hyper-v', 'core' and 'x86/amd' into next | |
|
Anson Huang
|
2a975ac9c3 |
dt-bindings: mailbox: Convert imx mu to json-schema
Convert the i.MX MU binding to DT schema format using json-schema Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Anson Huang
|
e6b12afe65 |
dt-bindings: power: Convert imx gpcv2 to json-schema
Convert the i.MX GPCv2 binding to DT schema format using json-schema Example is updated based on latest DT file and consumer's example is removed since it is NOT that useful. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Anson Huang
|
0c03fa00fd |
dt-bindings: power: Convert imx gpc to json-schema
Convert the i.MX GPC binding to DT schema format using json-schema >From latest reference manual, there is actually ONLY 1 interrupt for GPC, so the additional GPC interrupt is removed. Consumer's example is also removed since it is NOT that useful. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Linus Torvalds
|
b23c4771ff |
A fair amount of stuff this time around, dominated by yet another massive
set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7 +NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw= =fDC/ -----END PGP SIGNATURE----- Merge tag 'docs-5.8' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "A fair amount of stuff this time around, dominated by yet another massive set from Mauro toward the completion of the RST conversion. I *really* hope we are getting close to the end of this. Meanwhile, those patches reach pretty far afield to update document references around the tree; there should be no actual code changes there. There will be, alas, more of the usual trivial merge conflicts. Beyond that we have more translations, improvements to the sphinx scripting, a number of additions to the sysctl documentation, and lots of fixes" * tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits) Documentation: fixes to the maintainer-entry-profile template zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst tracing: Fix events.rst section numbering docs: acpi: fix old http link and improve document format docs: filesystems: add info about efivars content Documentation: LSM: Correct the basic LSM description mailmap: change email for Ricardo Ribalda docs: sysctl/kernel: document unaligned controls Documentation: admin-guide: update bug-hunting.rst docs: sysctl/kernel: document ngroups_max nvdimm: fixes to maintainter-entry-profile Documentation/features: Correct RISC-V kprobes support entry Documentation/features: Refresh the arch support status files Revert "docs: sysctl/kernel: document ngroups_max" docs: move locking-specific documents to locking/ docs: move digsig docs to the security book docs: move the kref doc into the core-api book docs: add IRQ documentation at the core-api book docs: debugging-via-ohci1394.txt: add it to the core-api book docs: fix references for ipmi.rst file ... |
|
|
Linus Torvalds
|
533b220f7b |
arm64 updates for 5.8
- Branch Target Identification (BTI)
* Support for ARMv8.5-BTI in both user- and kernel-space. This
allows branch targets to limit the types of branch from which
they can be called and additionally prevents branching to
arbitrary code, although kernel support requires a very recent
toolchain.
* Function annotation via SYM_FUNC_START() so that assembly
functions are wrapped with the relevant "landing pad"
instructions.
* BPF and vDSO updates to use the new instructions.
* Addition of a new HWCAP and exposure of BTI capability to
userspace via ID register emulation, along with ELF loader
support for the BTI feature in .note.gnu.property.
* Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
- Shadow Call Stack (SCS)
* Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each
task that holds only return addresses. This protects function
return control flow from buffer overruns on the main stack.
* Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
* Core support for SCS, should other architectures want to use it
too.
* SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
- CPU feature detection
* Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a
concern for KVM, which disabled support for 32-bit guests on
such a system.
* Addition of new ID registers and fields as the architecture has
been extended.
- Perf and PMU drivers
* Minor fixes and cleanups to system PMU drivers.
- Hardware errata
* Unify KVM workarounds for VHE and nVHE configurations.
* Sort vendor errata entries in Kconfig.
- Secure Monitor Call Calling Convention (SMCCC)
* Update to the latest specification from Arm (v1.2).
* Allow PSCI code to query the SMCCC version.
- Software Delegated Exception Interface (SDEI)
* Unexport a bunch of unused symbols.
* Minor fixes to handling of firmware data.
- Pointer authentication
* Add support for dumping the kernel PAC mask in vmcoreinfo so
that the stack can be unwound by tools such as kdump.
* Simplification of key initialisation during CPU bringup.
- BPF backend
* Improve immediate generation for logical and add/sub
instructions.
- vDSO
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
- ACPI
- Work around for an ambiguity in the IORT specification relating
to the "num_ids" field.
- Support _DMA method for all named components rather than only
PCIe root complexes.
- Minor other IORT-related fixes.
- Miscellaneous
* Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
* Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
* Refactoring and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
=w3qi
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"A sizeable pile of arm64 updates for 5.8.
Summary below, but the big two features are support for Branch Target
Identification and Clang's Shadow Call stack. The latter is currently
arm64-only, but the high-level parts are all in core code so it could
easily be adopted by other architectures pending toolchain support
Branch Target Identification (BTI):
- Support for ARMv8.5-BTI in both user- and kernel-space. This allows
branch targets to limit the types of branch from which they can be
called and additionally prevents branching to arbitrary code,
although kernel support requires a very recent toolchain.
- Function annotation via SYM_FUNC_START() so that assembly functions
are wrapped with the relevant "landing pad" instructions.
- BPF and vDSO updates to use the new instructions.
- Addition of a new HWCAP and exposure of BTI capability to userspace
via ID register emulation, along with ELF loader support for the
BTI feature in .note.gnu.property.
- Non-critical fixes to CFI unwind annotations in the sigreturn
trampoline.
Shadow Call Stack (SCS):
- Support for Clang's Shadow Call Stack feature, which reserves
platform register x18 to point at a separate stack for each task
that holds only return addresses. This protects function return
control flow from buffer overruns on the main stack.
- Save/restore of x18 across problematic boundaries (user-mode,
hypervisor, EFI, suspend, etc).
- Core support for SCS, should other architectures want to use it
too.
- SCS overflow checking on context-switch as part of the existing
stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
CPU feature detection:
- Removed numerous "SANITY CHECK" errors when running on a system
with mismatched AArch32 support at EL1. This is primarily a concern
for KVM, which disabled support for 32-bit guests on such a system.
- Addition of new ID registers and fields as the architecture has
been extended.
Perf and PMU drivers:
- Minor fixes and cleanups to system PMU drivers.
Hardware errata:
- Unify KVM workarounds for VHE and nVHE configurations.
- Sort vendor errata entries in Kconfig.
Secure Monitor Call Calling Convention (SMCCC):
- Update to the latest specification from Arm (v1.2).
- Allow PSCI code to query the SMCCC version.
Software Delegated Exception Interface (SDEI):
- Unexport a bunch of unused symbols.
- Minor fixes to handling of firmware data.
Pointer authentication:
- Add support for dumping the kernel PAC mask in vmcoreinfo so that
the stack can be unwound by tools such as kdump.
- Simplification of key initialisation during CPU bringup.
BPF backend:
- Improve immediate generation for logical and add/sub instructions.
vDSO:
- Minor fixes to the linker flags for consistency with other
architectures and support for LLVM's unwinder.
- Clean up logic to initialise and map the vDSO into userspace.
ACPI:
- Work around for an ambiguity in the IORT specification relating to
the "num_ids" field.
- Support _DMA method for all named components rather than only PCIe
root complexes.
- Minor other IORT-related fixes.
Miscellaneous:
- Initialise debug traps early for KGDB and fix KDB cacheflushing
deadlock.
- Minor tweaks to early boot state (documentation update, set
TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
KVM: arm64: Check advertised Stage-2 page size capability
arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
ACPI/IORT: Remove the unused __get_pci_rid()
arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
arm64/cpufeature: Introduce ID_MMFR5 CPU register
arm64/cpufeature: Introduce ID_DFR1 CPU register
arm64/cpufeature: Introduce ID_PFR2 CPU register
arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
arm64: mm: Add asid_gen_match() helper
firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
arm64: vdso: Fix CFI directives in sigreturn trampoline
arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
...
|
|
|
Andrii Nakryiko
|
97abb2b396 |
docs/bpf: Add BPF ring buffer design notes
Add commit description from patch #1 as a stand-alone documentation under Documentation/bpf, as it might be more convenient format, in long term perspective. Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200529075424.3139988-6-andriin@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
|
|
Linus Torvalds
|
bb548bedf5 |
Misc dependency fixes, plus a documentation update about memory protection keys support.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7VK9cRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ibgw//acOg/6o7HzHS19nEDfRf2grtipPq0lZN laIBlGNQdyQHoTMbvF4X8hE1VuALdcr+kVCXirvHnTVsE62fqR8KzdTeEPHHSamy VWZkaOGq+jZiJnM4EZ1j6y0E6Cf9SWU2Zho4Ov/j88s3aYhkYG6EU+8dZMpI2pLU EqZAqzuZ8lJYDchv+Xbd/dN3p8DoCzbcZ5nJN+mDaHiVruLB3fk3cqBjAhAbvYFO X2Fk4yNccvHWjGbBNbgoddTRt/ZHC+PhiIGvE+KzcDLZipjUj4M7WxznLGdILFT/ Vpys3Uewa64bQk/GURuxh7A/IjzqohCKq0pLugU3B1FW6nASCUuySbN8KroIiGo8 Vnesc6G4G+KtxJGq18/umSaDoX9RmNM7iyeGt2G3yyV5MFPz83XZmtCVHizY6ayk PPDB1lPXks3NpdKBgH/SYDfm7GBI3CwH7ttr3+DSl8nfadfIjQtu5hnhdBLeGWj4 AVhWSTyaLfABkRoU+DEg9YbzvcywjNOp0sblIxhxFiPKECymhNdBmljQmW6EMTRg j1El5pdYp0D+MNyBTewgD033yMm5pLsHZX+aiyG5ULizevemjWrnprzFYFnSYBZY ivfRnsK7zzWh+cejJJiZKPPR4RDu+VNneCd2PWjqX6VwPd03QjmOI8zw7WeLSbZl kzzhOThwvdo= =idS6 -----END PGP SIGNATURE----- Merge tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build updates from Ingo Molnar: "Misc dependency fixes, plus a documentation update about memory protection keys support" * tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Update config and kernel doc for MPK feature on AMD x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage x86/boot/build: Add cpustr.h to targets and remove clean-files |
|
|
Linus Torvalds
|
ae1a4113c2 |
Misc updates:
- Add the initrdmem= boot option to specify an initrd embedded in RAM (flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES.
- Various fixes and smaller cleanups.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U/uh
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- Add the initrdmem= boot option to specify an initrd embedded in RAM
(flash most likely)
- Sanitize the CS value earlier during boot, which also fixes SEV-ES
- Various fixes and smaller cleanups"
* tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Correct relocation destination on old linkers
x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
x86/boot: Fix -Wint-to-pointer-cast build warning
x86/boot: Add kstrtoul() from lib/
x86/tboot: Mark tboot static
x86/setup: Add an initrdmem= option to specify initrd physical address
|
|
|
Linus Torvalds
|
d861f6e682 |
Misc cleanups in the SMP hotplug and cross-call code.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7VJfsRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1ihcA/+Ko18kdGRPAlShM9qkDWO5N80p1LEp7F0 ku1OxPAz9ii7K/jlnGr9wYYPxsIL3lbFeqFE7q5q5socXufaN8MUj9sVCmN7ScmR zO84aTHtxrJJhKIPM6HkUTbVl5KrQaud3F/J56CCjuKPsJWy9iuCGnKtfKK38bx+ qJEfVKVm95Bv0NSEvqvci3DKKPYjzpKzuuttHXQ8Z80zG94FEkwj0JwZzttIjLl1 rgRMgWTH7+3tQCMnZEfXG8xBxbXS9i3hKyr/v5QTNgIICyXGquPkf5MiwjJFS2Xb wpPqNh8HTo5kUJstYygRjcftatU7K72h2Rz/CoUkN2roNYlvRAhdBaBMwN0cGaG8 pPhnLHHHRYZjl4fiROgRwVV3A6LcAHSrIcKzwGrvpCSpqyVozPGsmD/e8ZG1JYpC vxESTZbCDywng2Ls8jqQBut+dFGElvopXl1s004bCak89IFR4p15qojMJK2MSsqu BxhjIoqp8/f1fsAX+1p0RBEYnEr1KFtWa+nY8aVKL6bEx+Y7Qyq0ypMGtKavP06X VMcPMm1gYeXoGpLaTLYBRL5t7Rmm7i+xufuDQKUJetenfh2YS4aQ9lfV+rsQH1YE wavQrbwThfBZ9K1XkEmOkSqONysZ2YAtK9slKzciQIZvY3V8NbKAmBudCgqTgarp xqeW9NFfeFc= =Rr2n -----END PGP SIGNATURE----- Merge tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP updates from Ingo Molnar: "Misc cleanups in the SMP hotplug and cross-call code" * tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove __freeze_secondary_cpus() cpu/hotplug: Remove disable_nonboot_cpus() cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted" smp: Use smp_call_func_t in on_each_cpu() |
|
|
Linus Torvalds
|
58ff3b7604 |
The EFI changes for this cycle are:
- preliminary changes for RISC-V
- Add support for setting the resolution on the EFI framebuffer
- Simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on symbol
annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character strings
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XG4E
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The EFI changes for this cycle are:
- preliminary changes for RISC-V
- Add support for setting the resolution on the EFI framebuffer
- Simplify kernel image loading for arm64
- Move .bss into .data via the linker script instead of relying on
symbol annotations.
- Get rid of __pure getters to access global variables
- Clean up the config table matching arrays
- Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them
consistently
- Simplify and unify initrd loading
- Parse the builtin command line on x86 (if provided)
- Implement printk() support, including support for wide character
strings
- Simplify GDT handling in early mixed mode thunking code
- Some other minor fixes and cleanups"
* tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
efi/x86: Don't blow away existing initrd
efi/x86: Drop the special GDT for the EFI thunk
efi/libstub: Add missing prototype for PE/COFF entry point
efi/efivars: Add missing kobject_put() in sysfs entry creation error path
efi/libstub: Use pool allocation for the command line
efi/libstub: Don't parse overlong command lines
efi/libstub: Use snprintf with %ls to convert the command line
efi/libstub: Get the exact UTF-8 length
efi/libstub: Use %ls for filename
efi/libstub: Add UTF-8 decoding to efi_puts
efi/printf: Add support for wchar_t (UTF-16)
efi/gop: Add an option to list out the available GOP modes
efi/libstub: Add definitions for console input and events
efi/libstub: Implement printk-style logging
efi/printf: Turn vsprintf into vsnprintf
efi/printf: Abort on invalid format
efi/printf: Refactor code to consolidate padding and output
efi/printf: Handle null string input
efi/printf: Factor out integer argument retrieval
efi/printf: Factor out width/precision parsing
...
|
|
|
Linus Torvalds
|
a7092c8204 |
Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
|
|
|
Linus Torvalds
|
60056060be |
The biggest change to core locking facilities in this cycle is the introduction
of local_lock_t - this primitive comes from the -rt project and identifies CPU-local locking dependencies normally handled opaquely beind preempt_disable() or local_irq_save/disable() critical sections. The generated code on mainline kernels doesn't change as a result, but still there are benefits: improved debugging and better documentation of data structure accesses. The new local_lock_t primitives are introduced and then utilized in a couple of kernel subsystems. No change in functionality is intended. There's also other smaller changes and cleanups. Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7VAogRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1h67BAAusYb44jJyZUE74rmaLnJr0c6j7eJ6twT 8LKRwxb21Y35DMuX6M5ewmvnHiLFYmjL728z+y8O+SP8vb4PSJBX/75X+wsawIJB cjHdxonyynVVC4zcbdrc37FsrOiVoKLbbZcpqRzHksKkCq2PHbFVxBNvEaKHZCWW 1jnq0MRy9wEJtW9EThDWPLD+OPWhBvocUFYJH4fiqCIaDiip/E16fz3i+yMPt545 Jz4Ibnsq+G5Ehm1N2AkaZuK9V9nYv85E7Z/UNiK4mkDOApE6OMS+q3d86BhqgPg5 g/HL3HNXAtIY74tBYAac5tAQglT+283LuTpEPt9BEjNM7QxKg/ecXO7lwtn7Boku dACMqeuMHbLyru8uhbun/VBx1gca7HIhW1cvXO5OoR7o78fHpEFivjJ0B0OuSYAI y+/DsA41OlkWSEnboUs+zTQgFatqxQPke92xpGOJtjVVZRYHRqxcPtw9WFmoVqWA HeczDQLcSUhqbKSfr6X9BO2u3qxys5BzmImTKMqXEQ4d8Kk0QXbJgGYGfS8+ASey Am/jwUP3Cvzs99NxLH5gECKRSuTx3rY7nRGaIBYa+Ui575bdSF8sVAF13riB2mBp NJq2Pw0D36WcX7ecaC2Fk2ezkphbeuAr8E7gh/Mt/oVxjrfwRGfPMrnIwKygUydw 1W5x+WZ+WsY= =TBTY -----END PGP SIGNATURE----- Merge tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The biggest change to core locking facilities in this cycle is the introduction of local_lock_t - this primitive comes from the -rt project and identifies CPU-local locking dependencies normally handled opaquely beind preempt_disable() or local_irq_save/disable() critical sections. The generated code on mainline kernels doesn't change as a result, but still there are benefits: improved debugging and better documentation of data structure accesses. The new local_lock_t primitives are introduced and then utilized in a couple of kernel subsystems. No change in functionality is intended. There's also other smaller changes and cleanups" * tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: zram: Use local lock to protect per-CPU data zram: Allocate struct zcomp_strm as per-CPU memory connector/cn_proc: Protect send_msg() with a local lock squashfs: Make use of local lock in multi_cpu decompressor mm/swap: Use local_lock for protection radix-tree: Use local_lock for protection locking: Introduce local_lock() locking/lockdep: Replace zero-length array with flexible-array locking/rtmutex: Remove unused rt_mutex_cmpxchg_relaxed() |
|
|
Stephen Boyd
|
166e4b4841 |
Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next
- Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - New clk driver for Baikal-T1 SoCs * clk-vc5: dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 * clk-hsdk: CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first * clk-mediatek: clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC * clk-baikal: clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding |
|
|
Stephen Boyd
|
5debcd01e2 |
Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and 'clk-silabs' into clk-next
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series |
|
|
Stephen Boyd
|
b6f3162d0e |
Merge branches 'clk-unisoc', 'clk-trivial', 'clk-bcm', 'clk-st' and 'clk-ast2600' into clk-next
* clk-unisoc: clk: sprd: add mipi_csi_xx gate clocks clk: sprd: add dt-bindings include for mipi_csi_xx clocks dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A clk: sprd: check its parent status before reading gate clock clk: sprd: return correct type of value for _sprd_pll_recalc_rate clk: sprd: mark the local clock symbols static * clk-trivial: clk: versatile: remove redundant assignment to pointer clk clk: clk-xgene: Fix a typo in Kconfig clk: Remove unused inline function clk_debug_reparent * clk-bcm: clk: bcm2835: Constify struct debugfs_reg32 clk: bcm2835: Remove casting to bcm2835_clk_register clk: bcm2835: Fix return type of bcm2835_register_gate * clk-st: clk: clk-flexgen: fix clock-critical handling * clk-ast2600: clk: ast2600: Fix AHB clock divider for A1 |
|
|
Stephen Boyd
|
8c88e568b5 |
Merge branches 'clk-tegra', 'clk-imx', 'clk-zynq', 'clk-socfpga', 'clk-at91' and 'clk-ti' into clk-next
- Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - Support for Intel Agilex clks * clk-tegra: clk: tegra: Add Tegra210 CSI TPG clock gate clk: tegra30: Use custom CCLK implementation clk: tegra20: Use custom CCLK implementation clk: tegra: cclk: Add helpers for handling PLLX rate changes clk: tegra: pll: Add pre/post rate-change hooks clk: tegra: Add custom CCLK implementation clk: tegra: Remove the old emc_mux clock for Tegra210 clk: tegra: Implement Tegra210 EMC clock clk: tegra: Export functions for EMC clock scaling clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210 clk: tegra: Rename Tegra124 EMC clock source file dt-bindings: clock: tegra: Add clock ID for CSI TPG clock * clk-imx: clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice clk: imx: add imx8m_clk_hw_composite_bus clk: imx: add mux ops for i.MX8M composite clk clk: imx8m: migrate A53 clk root to use composite core clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code clk: imx8mp: Define gates for pll1/2 fixed dividers clk: imx: imx8mp: fix pll mux bit clk: imx8m: drop clk_hw_set_parent for A53 dt-bindings: clocks: imx8mp: Add ids for audiomix clocks clk: imx: Add helpers for passing the device as argument clk: imx: pll14xx: Add the device as argument when registering clk: imx: gate2: Allow single bit gating clock clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait clk: imx: clk-sscg-pll: Remove unnecessary blank lines clk: imx: drop the dependency on ARM64 for i.MX8M clk: imx7ulp: make it easy to change ARM core clk clk: imx: imx6ul: change flexcan clock to support CiA bitrates * clk-zynq: clk: zynqmp: Make zynqmp_clk_get_max_divisor static clk: zynqmp: Update fraction clock check from custom type flags clk: zynqmp: Add support for custom type flags clk: zynqmp: fix memory leak in zynqmp_register_clocks clk: zynqmp: Fix invalid clock name queries clk: zynqmp: Fix divider2 calculation clk: zynqmp: Limit bestdiv with maxdiv * clk-socfpga: clk: socfpga: agilex: add clock driver for the Agilex platform dt-bindings: documentation: add clock bindings information for Agilex clk: socfpga: add const to _ops data structures clk: socfpga: remove clk_ops enable/disable methods clk: socfpga: stratix10: use new parent data scheme * clk-at91: clk: at91: allow setting all PMC clock parents via DT clk: at91: allow setting PCKx parent via DT clk: at91: optimize pmc data allocation clk: at91: pmc: decrement node's refcount clk: at91: pmc: do not continue if compatible not located clk: at91: Add peripheral clock for PTC * clk-ti: clk: ti: dra7: remove two unused symbols clk: ti: dra7xx: fix RNG clock parent clk: ti: dra7xx: mark MCAN clock as DRA76x only clk: ti: dra7xx: fix gpu clkctrl parent clk: ti: omap5: Add proper parent clocks for l4-secure clocks clk: ti: omap4: Add proper parent clocks for l4-secure clocks clk: ti: composite: fix memory leak |
|
|
Linus Torvalds
|
2227e5b21a |
The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl7U/r0RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hSNxAAirKhPGBoLI9DW1qde4OFhZg+BlIpS+LD
IE/0eGB8hGwhb1793RGbzIJfSnRQpSOPxWbWc6DJZ4Zpi5/ZbVkiPKsuXpM1xGxs
kuBCTOhWy1/p3iCZ1JH/JCrCAdWGZkIzEoaV7ipnHtV/+UrRbCWH5PB7R0fYvcbI
q5bUcWJyEp/bYMxQn8DhAih6SLPHx+F9qaGAqqloLSHstTYG2HkBhBGKnqcd/Jex
twkLK53poCkeP/c08V1dyagU2IRWj2jGB1NjYh/Ocm+Sn/vru15CVGspjVjqO5FF
oq07lad357ddMsZmKoM2F5DhXbOh95A+EqF9VDvIzCvfGMUgqYI1oxWF4eycsGhg
/aYJgYuN23YeEe2DkDzJB67GvBOwl4WgdoFaxKRzOiCSfrhkM8KqM4G9Fz1JIepG
abRJCF85iGcLslU9DkrShQiDsd/CRPzu/jz6ybK0I2II2pICo6QRf76T7TdOvKnK
yXwC6OdL7/dwOht20uT6XfnDXMCWI4MutiUrb8/C1DbaihwEaI2denr3YYL+IwrB
B38CdP6sfKZ5UFxKh0xb+sOzWrw0KA+ThSAXeJhz3tKdxdyB6nkaw3J9lFg8oi20
XGeAujjtjMZG5cxt2H+wO9kZY0RRau/nTqNtmmRrCobd5yJjHHPHH8trEd0twZ9A
X5Wjh11lv3E=
=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
|
|
|
Linus Torvalds
|
ca1f5df23f |
Printk changes for 5.8
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl7U1TIACgkQUqAMR0iA lPI0mQ//TcVlRJgts/iwv0M2Simje28t9tziOHgWmEeiyGwE7vwDPDzt8QFiKzBa IrJ5iTRMtCrEF+eapqeH4g+Ve4Npm5Cobl8/h9JEiVu3SNC48TuaiUzU3+Bfl1zV vcDfZtN9QD1/CdLGlyKO75xjkCOaJRCFnx5ToXnd3llshMKI2XebUCnEH4TDe6Fz NGTjJL4kCPwzmae++UhlMfKwkayBtNbqcLkaTb7d67Tw2DcuuIVixUER77oC9QPN SfxdS07s0UVc4C9bCVe3KtYZR5YU/riOjKNJNutzP3JDtQNugywrrtI0qBwEisqM puMJ3xLeLssTn10FJxRK9ewRlXy2zT9mmcCuaVU6LtiyGnHOuEwIU+Ewu0itiJGu JuFovsNqTvOiZqFP7+pkDktOjffF2hsY/a6NxHr6aof8CrdO2w9dmCAgzGvnwV1N /zlmmPSEigVLz47eeivIIdQrPUejrEV7g1wOYYApnIlNCmGjdkGnXKNaUrLGDehQ QIlpx1uvmhntjiw1hTSbOV7KOQxLGtuy6DWLYC7uHD3H3aGDQyQO8dZYXSfOY1Qu cvQ/K8ykW0Kq2JKEHjkwSRHKDpxhvbQg7N5JCHQA49ahdZD3O5bOfeTofw+7nFO0 j9g2Qv6nWFjLbAIAFtqjh6wz0UtGNoTl2cqQswsS10wlDcsq8vs= =pUBG -----END PGP SIGNATURE----- Merge tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Benjamin Herrenschmidt solved a problem with non-matched console aliases by first checking consoles defined on the command line. It is a more conservative approach than the previous attempts. - Benjamin also made sure that the console accessible via /dev/console always has CON_CONSDEV flag. - Andy Shevchenko added the %ptT modifier for printing struct time64_t. It extends the existing %ptR handling for struct rtc_time. - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported SEEK_CUR. - Tetsuo Handa removed unused pr_cont_once(). ... and a few small fixes. * tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove pr_cont_once() printk: handle blank console arguments passed in. kernel/printk: add kmsg SEEK_CUR handling printk: Fix a typo in comment "interator"->"iterator" usb: pulse8-cec: Switch to use %ptT ARM: bcm2835: Switch to use %ptT lib/vsprintf: Print time64_t in human readable format lib/vsprintf: update comment about simple_strto<foo>() functions printk: Correctly set CON_CONSDEV even when preferred console was not registered printk: Fix preferred console selection with multiple matches printk: Move console matching logic into a separate function printk: Convert a use of sprintf to snprintf in console_unlock |
|
|
Linus Torvalds
|
afdb0f2ec5 |
fscrypt updates for 5.8
- Add the IV_INO_LBLK_32 encryption policy flag which modifies the encryption to be optimized for eMMC inline encryption hardware. - Make the test_dummy_encryption mount option for ext4 and f2fs support v2 encryption policies. - Fix kerneldoc warnings and some coding style inconsistencies. There will be merge conflicts with the ext4 and f2fs trees due to the test_dummy_encryption change, but the resolutions are straightforward. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXtScMBQcZWJpZ2dlcnNA Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKxC6AP0eOEkMrc9e10YftdN6xsyRjvqiPyFg oMjuU+SvQ+/sVgEAo0mBFITnl75ZGb8PyqXCNMDAy6uHaxcEjVGufx5q2QE= =dbxy -----END PGP SIGNATURE----- Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fscrypt updates from Eric Biggers: - Add the IV_INO_LBLK_32 encryption policy flag which modifies the encryption to be optimized for eMMC inline encryption hardware. - Make the test_dummy_encryption mount option for ext4 and f2fs support v2 encryption policies. - Fix kerneldoc warnings and some coding style inconsistencies. * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: add support for IV_INO_LBLK_32 policies fscrypt: make test_dummy_encryption use v2 by default fscrypt: support test_dummy_encryption=v2 fscrypt: add fscrypt_add_test_dummy_key() linux/parser.h: add include guards fscrypt: remove unnecessary extern keywords fscrypt: name all function parameters fscrypt: fix all kerneldoc warnings |
|
|
Linus Torvalds
|
829f3b9401 |
Fixes and new features for pstore
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
|
|
|
Linus Torvalds
|
81e8c10dac |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Introduce crypto_shash_tfm_digest() and use it wherever possible. - Fix use-after-free and race in crypto_spawn_alg. - Add support for parallel and batch requests to crypto_engine. Algorithms: - Update jitter RNG for SP800-90B compliance. - Always use jitter RNG as seed in drbg. Drivers: - Add Arm CryptoCell driver cctrng. - Add support for SEV-ES to the PSP driver in ccp" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits) crypto: hisilicon - fix driver compatibility issue with different versions of devices crypto: engine - do not requeue in case of fatal error crypto: cavium/nitrox - Fix a typo in a comment crypto: hisilicon/qm - change debugfs file name from qm_regs to regs crypto: hisilicon/qm - add DebugFS for xQC and xQE dump crypto: hisilicon/zip - add debugfs for Hisilicon ZIP crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC crypto: hisilicon/qm - add debugfs to the QM state machine crypto: hisilicon/qm - add debugfs for QM crypto: stm32/crc32 - protect from concurrent accesses crypto: stm32/crc32 - don't sleep in runtime pm crypto: stm32/crc32 - fix multi-instance crypto: stm32/crc32 - fix run-time self test issue. crypto: stm32/crc32 - fix ext4 chksum BUG_ON() crypto: hisilicon/zip - Use temporary sqe when doing work crypto: hisilicon - add device error report through abnormal irq crypto: hisilicon - remove codes of directly report device errors through MSI crypto: hisilicon - QM memory management optimization crypto: hisilicon - unify initial value assignment into QM ... |
|
|
Ido Schimmel
|
5eb18a2b6c |
devlink: Add ACL control packet traps
Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Ido Schimmel
|
d77cfd162a |
devlink: Add layer 3 control packet traps
Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Ido Schimmel
|
515eac677f |
devlink: Add layer 2 control packet traps
Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Ido Schimmel
|
30a4e9a29a |
devlink: Add 'control' trap type
This type is used for traps that trap control packets such as ARP request and IGMP query to the CPU. Do not report such packets to the kernel's drop monitor as they were not dropped by the device no encountered an exception during forwarding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Ido Schimmel
|
9eefeabed6 |
devlink: Add 'mirror' trap action
The action is used by control traps such as IGMP query. The packet is flooded by the device, but also trapped to the CPU in order for the software bridge to mark the receiving port as a multicast router port. Such packets are marked with 'skb->offload_fwd_mark = 1' in order to prevent the software bridge from flooding them again. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Ido Schimmel
|
678eb199cc |
devlink: Create dedicated trap group for layer 3 exceptions
Packets that hit exceptions during layer 3 forwarding must be trapped to the CPU for the control plane to function properly. Create a dedicated group for them, so that user space could choose to assign a different policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Linus Torvalds
|
d30fc97c60 |
regulator: Updates for v5.8
The big change in this release is that Matti Vaittinen has factored out
the linear ranges support into a separate library in lib/ since it is
also useful for at least the power subsystem (and most likely others
too), it helps subsystems which need to map register values into more
useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U8oETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Fi+B/47cqB4/3uchKAXCHn4WE0hDANfeK4k
SkyBl9OH/UC0I/+V/nFrl1CfZgPMm18MuXG+D6fO+qqd1Df7EIgtehxh3MOjD15m
ZFFGybKBG2xg5G/dULE58/N5ZNTd03x8kgYePFmJEFe+m4qUvuICDEoOTHq+tvOO
sgeZPKYuipmGNrUAV4l49SSPuTFBhvAIg5VoR+K9TxxWAacMu7JM7GuGUMij8XwR
i1AryKGvDuCa7hfdWGVwbE+W/XmXiAWsmyz04YDXsYLTk9TjqviCJgf1Bst5EphP
ACr+KMDUIl+Y06wd7DE1UYnXtIxQg/MQ6wlJxG+wtIiZUt2vZcP2pbT6
=w291
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is that Matti Vaittinen has factored
out the linear ranges support into a separate library in lib/ since it
is also useful for at least the power subsystem (and most likely
others too), it helps subsystems which need to map register values
into more useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998"
* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: max8998: max8998_set_current_limit() can be static
dt-bindings: regulator: Convert anatop regulator to json-schema
regulator: core: Add regulator bypass trace points
regulator: extract voltage balancing code to the separate function
regulator/mfd: max8998: Document charger regulator
regulator: max8998: Add charger regulator
MAINTAINERS: Add maintainer entry for linear ranges helper
regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
lib: linear_ranges: Add missing MODULE_LICENSE()
regulator: use linear_ranges helper
power: supply: bd70528: rename linear_range to avoid collision
lib/test_linear_ranges: add a test for the 'linear_ranges'
lib: add linear ranges helpers
regulator: db8500-prcmu: Use true,false for bool variable
regulator: bd718x7: remove voltage change restriction from BD71847
regulator: max77826: Remove erroneous additionalProperties
regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
regulator: Document bindings for max77826
regulator: max77826: Add max77826 regulator driver
regulator: tps80031: remove redundant assignment to variables ret and val
...
|
|
|
Linus Torvalds
|
a36de5ebac |
spi: Updates for v5.8
This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with some
of that work still not landed. Otherwise it's been fairly quiet for the
subsystem. Highlights include:
- Lots of performance improvements and fixes for the DesignWare driver
from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement Leger,
Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4,
and Intel Elkhart Lake.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U6r0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LasB/9npXOMe6tOT03YqtIhN4pxrdUo+LsN
A5Rc8prfQo7srnIZMndt5/wcTftomVdvjSNrtyXMXtzj+Logx01Pndrr6UVUP6Qq
Sy0R+4QXBSlj5QtUOBvGFTlzKw2BEaOBYftxVKQM6s4eoefvl0BFALHpEeaHvsDO
YXfwU8EK6sZylDzvsuVy2uoJlTcY4+wKop7JWY5Ze+LTUjsuJQVEG9zbxpZNEpOn
ZHO3FVS2MlIAuhcVmy0TfvYxTldTrT89zv8x4sKaPaXwDJFzYjJBwz77vYAjD8u5
i52JhrAMkZyU4SZdnciJLJx9oTdT8+Rj32oQBU6uK8nRN7U3zflNHHQw
=qm1J
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
|
|
|
Linus Torvalds
|
129b9a5c40 |
hwmon updates for v5.8
Infrastructure - Add notification support New drivers - Baikal-T1 PVT sensor driver - amd_energy driver to report energy counters - Driver for Maxim MAX16601 - Gateworks System Controller Various - applesmc: avoid overlong udelay() - dell-smm: Use one DMI match for all XPS models - ina2xx: Implement alert functions - lm70: Add support for ACPI - lm75: Fix coding-style warnings - lm90: Add max6654 support to lm90 driver - nct7802: Replace container_of() API - nct7904: Set default timeout - nct7904: Add watchdog function - pmbus: Improve initialization of 'currpage' and 'currphase' -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAl7UYTAACgkQyx8mb86f mYHRexAAqqP6Wc0ntc3vJXD9wyjW3KDtZI7BLmhq82VCLoxIel7mhWUCOQvSINtS OtW5VsXWo1UeKZnc00sHf91cv3IO2ANBAdgP8RM3lMeUq2ZwTCfNB5G9tf6CsRjJ yagrJgLWrQYTJWiD9VkdUE2vYbsK4xuNv6sqJIdYhdlEMzdJbiK1E9gQIYUBdHEx EKHiopQbpxYG/t1hwhkPVfWDdCK1D5jjQ6YVYlC2Y4L3b//vcOrpHvqKuNPTCBSI EemAyOOGIJBsvDdTc697+6ilA9GxNuDjlnQb8WZdv8gODQP60Bq6YZvZ//jlJMY8 V6qEdTZJNqzist0MMKzuf2X0mgQ1ZavpBizMu1G90Ri60lhYfMdciYmGkI63WtL4 /RMdppLhuG5CQNEmyquM6ZalZMx1ja48jqB76GQeSNS5b2L+oT6iCowyA0LN9Vio FAhGTuQ8/f/5af6mapGKR6G9Ua8D6+KbeQmMUV+2puBfDA+FuP1A1y6fZ5RTT4kV qBiGdD5XQJid6uTGuof4Q49iCNzwQhugB/f2oO3Go84S8PRvsqMb2JLWFsXm9MtB 90PuV2vLca6WdNVG3QZSHKm2nhr/PRFu3DvU1Y6hDA9zmKFBhoaeVqW2L3JEEZzL uaNchz6Uni4rUNf9f+E+s4CosaeRnAsgXi/DUVS7wGhd1K48ylo= =QZKO -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Infrastructure: - Add notification support New drivers: - Baikal-T1 PVT sensor driver - amd_energy driver to report energy counters - Driver for Maxim MAX16601 - Gateworks System Controller Various: - applesmc: avoid overlong udelay() - dell-smm: Use one DMI match for all XPS models - ina2xx: Implement alert functions - lm70: Add support for ACPI - lm75: Fix coding-style warnings - lm90: Add max6654 support to lm90 driver - nct7802: Replace container_of() API - nct7904: Set default timeout - nct7904: Add watchdog function - pmbus: Improve initialization of 'currpage' and 'currphase'" * tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits) hwmon: Add Baikal-T1 PVT sensor driver hwmon: Add notification support dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding hwmon: (applesmc) avoid overlong udelay() hwmon: (nct7904) Set default timeout hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init() MAINTAINERS: add entry for AMD energy driver hwmon: (amd_energy) Add documentation hwmon: Add amd_energy driver to report energy counters hwmon: (nct7802) Replace container_of() API hwmon: (lm90) Add max6654 support to lm90 driver hwmon : (nct6775) Use kobj_to_dev() API hwmon: (pmbus) Driver for Maxim MAX16601 hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase' hwmon: (adt7411) update contact email hwmon: (lm75) Fix all coding-style warnings on lm75 driver hwmon: Reduce indentation level in __hwmon_device_register() hwmon: (ina2xx) Implement alert functions hwmon: (lm70) Add support for ACPI hwmon: (dell-smm) Use one DMI match for all XPS models ... |
|
|
Richard Weinberger
|
a8dfb61d63 |
Raw NAND core changes:
* Stop using nand_release(), patched all drivers.
* Give more information about the ECC weakness when not matching the
chip's requirement.
* MAINTAINERS updates.
* Support emulated SLC mode on MLC NANDs.
* Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
* Take check_only into account.
* Add an invalid ECC mode to discriminate with valid ones.
* Return an enum from of_get_nand_ecc_algo().
* Drop OOB_FIRST placement scheme.
* Introduce nand_extract_bits().
* Ensure a consistent bitflips numbering.
* BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
* Fix nand_gpio_waitrdy().
* Propage CS selection to sub operations.
* Add a NAND_NO_BBM_QUIRK flag.
* Give the possibility to verify a read operation is supported.
* Add a helper to check supported operations.
* Avoid indirect access to ->data_buf().
* Rename the use_bufpoi variables.
* Fix comments about the use of bufpoi.
* Rename a NAND chip option.
* Reorder the nand_chip->options flags.
* Translate obscure bitfields into readable macros.
* Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
* Fixed many error paths.
* Arasan
- New driver
* Au1550nd:
- Various cleanups
- Migration to ->exec_op()
* brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
* Cadence
- Make cadence_nand_attach_chip static.
* Cafe:
- Set the NAND_NO_BBM_QUIRK flag
* cmx270:
- Remove this controller driver.
* cs553x:
- Misc cleanup
- Migration to ->exec_op()
* Davinci:
- Misc cleanup.
- Migration to ->exec_op()
* Denali:
- Add more delays before latching incoming data
* Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
* Fsmc:
- Change to non-atomic bit operations.
* GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
* Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
* Marvell:
- Misc cleanup and small fixes
* Nandsim:
- Fix the error paths, driver wide.
* Omap_elm:
- Fix runtime PM imbalance.
* STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl7TdZMACgkQJWrqGEe9
VoRthQgAttWsImXpEUa8C8CXvPhjpb6uZ7QYM4PSE0bheuVi7ivoDPyYWopno30h
R6UntGbsBqPyvDFDUxUEvyvn5F0JQK1dLif+7X0Ki5on6LkYdEuanHaSMZmSIXD8
atNhLVO1FeD3EulN8Dw9hGy6OrNT8O2bESbiJrCpOk9s6yAPINhKqZVJsyShcTs5
tc94/J0DIF7og8cdH4wYoz+AWw0WaHvPsn5VWnTy08gk7dB7hsq/DeftZmrJLL0g
B7Et1pvcLBSNBGBpzS6rEjXb/e3+wdKnNy0AQvrMdEZUzN3h9aY5sCLSFOsFfKQ+
xjxJgmyoKk0C9uCeNaPt8c7gTgAZAA==
=Gz6y
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
Raw NAND core changes:
* Stop using nand_release(), patched all drivers.
* Give more information about the ECC weakness when not matching the
chip's requirement.
* MAINTAINERS updates.
* Support emulated SLC mode on MLC NANDs.
* Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
* Take check_only into account.
* Add an invalid ECC mode to discriminate with valid ones.
* Return an enum from of_get_nand_ecc_algo().
* Drop OOB_FIRST placement scheme.
* Introduce nand_extract_bits().
* Ensure a consistent bitflips numbering.
* BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
* Fix nand_gpio_waitrdy().
* Propage CS selection to sub operations.
* Add a NAND_NO_BBM_QUIRK flag.
* Give the possibility to verify a read operation is supported.
* Add a helper to check supported operations.
* Avoid indirect access to ->data_buf().
* Rename the use_bufpoi variables.
* Fix comments about the use of bufpoi.
* Rename a NAND chip option.
* Reorder the nand_chip->options flags.
* Translate obscure bitfields into readable macros.
* Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
* Fixed many error paths.
* Arasan
- New driver
* Au1550nd:
- Various cleanups
- Migration to ->exec_op()
* brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
* Cadence
- Make cadence_nand_attach_chip static.
* Cafe:
- Set the NAND_NO_BBM_QUIRK flag
* cmx270:
- Remove this controller driver.
* cs553x:
- Misc cleanup
- Migration to ->exec_op()
* Davinci:
- Misc cleanup.
- Migration to ->exec_op()
* Denali:
- Add more delays before latching incoming data
* Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
* Fsmc:
- Change to non-atomic bit operations.
* GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
* Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
* Marvell:
- Misc cleanup and small fixes
* Nandsim:
- Fix the error paths, driver wide.
* Omap_elm:
- Fix runtime PM imbalance.
* STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
|
|
|
Randy Dunlap
|
e35b5a4c49 |
Documentation: fixes to the maintainer-entry-profile template
Do some wordsmithing and copy editing on the maintainer-entry-profile profile (template, guide): - fix punctuation - fix some wording - use "-rc" consistently Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-nvdimm@lists.01.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/fbaa9b67-e7b8-d5e8-ecbb-6ae068234880@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
|
|
Sedat Dilek
|
9469b39072 |
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
Recently, I switched over from swap-file to zramswap.
When reading the Documentation/vm/zswap.rst file I fell over this typo.
The parameter is called accept_threshold_percent not accept_threhsold_percent
in /sys/module/zswap/parameters/ directory.
Fixes:
|
|
|
Rafael J. Wysocki
|
a34024d98e |
Merge branches 'pm-devfreq', 'powercap', 'pm-docs' and 'pm-tools'
* pm-devfreq: PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting * powercap: powercap: RAPL: remove unused local MSR define powercap/intel_rapl: add support for ElkhartLake * pm-docs: Documentation: admin-guide: pm: Document intel-speed-select * pm-tools: cpupower: Remove unneeded semicolon |
|
|
Rafael J. Wysocki
|
ac7ccfc75f |
Merge branch 'pm-cpufreq'
* pm-cpufreq: cpufreq: Fix up cpufreq_boost_set_sw() cpufreq: fix minor typo in struct cpufreq_driver doc comment cpufreq: qoriq: Add platform dependencies clk: qoriq: add cpufreq platform device cpufreq: qoriq: convert to a platform driver cpufreq: qcom: fix wrong compatible binding cpufreq: imx-cpufreq-dt: support i.MX7ULP cpufreq: dt: Add support for r8a7742 cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS cpufreq: intel_pstate: Use passive mode by default without HWP |
|
|
Rafael J. Wysocki
|
f1ecbf7955 |
Merge branch 'pm-cpuidle'
* pm-cpuidle: cpuidle: Fix three reference count leaks cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver Documentation: ABI: make current_governer_ro as a candidate for removal Documentation: cpuidle: update the document cpuidle: sysfs: Remove sysfs_switch and switch attributes cpuidle: Make cpuidle governor switchable to be the default behaviour cpuidle: sysfs: Accept governor name with 15 characters cpuidle: sysfs: Fix the overlap for showing available governors cpuidle: psci: Fixup execution order when entering a domain idle state cpuidle: sysfs: Minor coding style corrections cpuidle: sysfs: Remove the unused define_one_r(o/w) macros |
|
|
Rafael J. Wysocki
|
be6018a44c |
Merge branches 'pm-core' and 'pm-sleep'
* pm-core: PM: runtime: Replace pm_runtime_callbacks_present() PM: runtime: clk: Fix clk_pm_runtime_get() error path PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() * pm-sleep: PM: hibernate: Restrict writes to the resume device PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling PM: sleep: Helpful edits for devices.rst documentation Documentation: PM: sleep: Update driver flags documentation PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED PM: sleep: core: Rename DPM_FLAG_NEVER_SKIP PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended() PM: sleep: core: Rename dev_pm_may_skip_resume() PM: sleep: core: Rework the power.may_skip_resume handling PM: sleep: core: Do not skip callbacks in the resume phase PM: sleep: core: Fold functions into their callers PM: sleep: core: Simplify the SMART_SUSPEND flag handling |
|
|
Tom Zanussi
|
5bbf959de4 |
tracing: Fix events.rst section numbering
The in-kernel trace event API should have its own section, and the duplicate section numbers need fixing as well. Link: https://lkml.kernel.org/r/90ea854dfb728390b50ddf8a8675238973ee014a.camel@kernel.org Reported-by: Li Xinhai <lixinhai.lxh@gmail.com> Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Steven Rostedt (VMware)
|
0906844545 |
tracing/doc: Fix typos in histogram-design.rst
There's a few typos in the histogram-design.rst document that need need to be fixed. Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Tom Zanussi
|
16b585fe71 |
tracing: Add histogram-design document
Add a new Documentation/trace/histogram-design.rst file describing the ftrace histogram low-level design, meant to help developers trying to understand the internals when extending or making use of the hist triggers for higher-level tools. This documentation refers to the hist_debug files implemented by 'tracing: Add hist_debug trace event files for histogram debugging' so users wishing to try out the test examples here should make sure CONFIG_HIST_TRIGGERS_DEBUG is enabled. Link: http://lkml.kernel.org/r/256b29c3274bb89a10157c4a8d1a8bce7e74849e.1585941485.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
|
|
Mark Brown
|
5fb565b69d
|
Merge remote-tracking branch 'regulator/for-5.8' into regulator-linus | |
|
Mark Brown
|
358c7c61fd
|
Merge remote-tracking branch 'asoc/for-5.8' into asoc-linus | |
|
Mark Brown
|
a72ff08faf
|
Merge remote-tracking branch 'asoc/for-5.7' into asoc-linus | |
|
Rafael J. Wysocki
|
4573e9ef51 |
Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework changes for v5.8 from Viresh Kumar: "This contains: - support for interconnect bandwidth in the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - support for regulator enable/disable (Kamil Konieczny). This is based on three patches from the interconnect tree which shall get merged via Greg's tree." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings |
|
|
Paolo Bonzini
|
380609445c |
KVM/arm64 updates for Linux 5.8:
- Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl7RLp8PHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpD/iAQAJOHsS1PT9y/Gefam5os9FqKpogj68e3rx9k XfPcweexBVqmDWSI4vmL9xHW2F7z4EwAE4dIDsTCKHpihK30+jH8l12tOJBz35yp MR1hYjv43F54xzKkkuP4F4wo3Ygg4ipjHZPReGkaGj1QOQs6N/YKa1aSSYfzkzCz VLCSqPQz45CkGPYEGwuPn13AjHqGQAwPhteJNAoCxViw1KAldmoqDk6kbKB+b+7a 2oIvxiTZejICsgSX6UvqQYNG52AyZ/5Daq8iraaigQ8sGyKr+/2Yi+3RUUH6p7ns aCsictk+RS3BzMAKDw6MPYc7OhJBhxQEV1pdiPpt0tpS4L9LNmBagKzlaBKZhwdr dYDAjOlbgZZUJpKnlBAipuVlQySHdm2WjXr4msdY69D7OGxmkzU/zkSIokqdA2hr MuL5W1v2Z1UpxyVltb+c/4lPcFZNnRI0Mz1WcvliEojlf2zzKYMcBAl3bTiAuil5 aTT2+1G0OSCfUfr8Zart4LoAHeczw4zG/Pern+hl92eMXUlX3pIcqzQaLtVmmEE/ ecPShMowKsXOOGGp/T8Q04N1fr6KzmufP5+kgJDFZfo6iJ6r5uQ9G8nuLmp3wQOX c9mNCwdSxrFBTJ10KfLHquKqwfl18VXzKDx1pzO5nSupmKWfWZ5YFO8j2709e83x R42MqKEG =aD+9 -----END PGP SIGNATURE----- Merge tag 'kvmarm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.8: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches |
|
|
Jon Doron
|
f97f5a56f5 |
x86/kvm/hyper-v: Add support for synthetic debugger interface
Add support for Hyper-V synthetic debugger (syndbg) interface. The syndbg interface is using MSRs to emulate a way to send/recv packets data. The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled and if it supports the synthetic debugger interface it will attempt to use it, instead of trying to initialize a network adapter. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200529134543.1127440-4-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Peter Shier
|
850448f35a |
KVM: nVMX: Fix VMX preemption timer migration
Add new field to hold preemption timer expiration deadline
appended to struct kvm_vmx_nested_state_hdr. This is to prevent
the first VM-Enter after migration from incorrectly restarting the timer
with the full timer value instead of partially decayed timer value.
KVM_SET_NESTED_STATE restarts timer using migrated state regardless
of whether L1 sets VM_EXIT_SAVE_VMX_PREEMPTION_TIMER.
Fixes:
|
|
|
Jon Doron
|
f7d31e6536 |
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
The problem the patch is trying to address is the fact that 'struct kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit modes. In 64-bit mode the default alignment boundary is 64 bits thus forcing extra gaps after 'type' and 'msr' but in 32-bit mode the boundary is at 32 bits thus no extra gaps. This is an issue as even when the kernel is 64 bit, the userspace using the interface can be both 32 and 64 bit but the same 32 bit userspace has to work with 32 bit kernel. The issue is fixed by forcing the 64 bit layout, this leads to ABI change for 32 bit builds and while we are obviously breaking '32 bit userspace with 32 bit kernel' case, we're fixing the '32 bit userspace with 64 bit kernel' one. As the interface has no (known) users and 32 bit KVM is rather baroque nowadays, this seems like a reasonable decision. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200424113746.3473563-2-arilou@gmail.com> Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Vitaly Kuznetsov
|
72de5fa4c1 |
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
Introduce new capability to indicate that KVM supports interrupt based delivery of 'page ready' APF events. This includes support for both MSR_KVM_ASYNC_PF_INT and MSR_KVM_ASYNC_PF_ACK. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200525144125.143875-8-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Vitaly Kuznetsov
|
557a961abb |
KVM: x86: acknowledgment mechanism for async pf page ready notifications
If two page ready notifications happen back to back the second one is not delivered and the only mechanism we currently have is kvm_check_async_pf_completion() check in vcpu_run() loop. The check will only be performed with the next vmexit when it happens and in some cases it may take a while. With interrupt based page ready notification delivery the situation is even worse: unlike exceptions, interrupts are not handled immediately so we must check if the slot is empty. This is slow and unnecessary. Introduce dedicated MSR_KVM_ASYNC_PF_ACK MSR to communicate the fact that the slot is free and host should check its notification queue. Mandate using it for interrupt based 'page ready' APF event delivery. As kvm_check_async_pf_completion() is going away from vcpu_run() we need a way to communicate the fact that vcpu->async_pf.done queue has transitioned from empty to non-empty state. Introduce kvm_arch_async_page_present_queued() and KVM_REQ_APF_READY to do the job. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200525144125.143875-7-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Vitaly Kuznetsov
|
2635b5c4a0 |
KVM: x86: interrupt based APF 'page ready' event delivery
Concerns were expressed around APF delivery via synthetic #PF exception as in some cases such delivery may collide with real page fault. For 'page ready' notifications we can easily switch to using an interrupt instead. Introduce new MSR_KVM_ASYNC_PF_INT mechanism and deprecate the legacy one. One notable difference between the two mechanisms is that interrupt may not get handled immediately so whenever we would like to deliver next event (regardless of its type) we must be sure the guest had read and cleared previous event in the slot. While on it, get rid on 'type 1/type 2' names for APF events in the documentation as they are causing confusion. Use 'page not present' and 'page ready' everywhere instead. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200525144125.143875-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
|
|
Petr Mladek
|
8b390ab725 | Merge branch 'for-5.8-printf-time64_t' into for-linus | |
|
Lubomir Rintel
|
ae5c0585df |
dt-bindings: mmc: Convert sdhci-pxa to json-schema
Convert the sdhci-pxa binding to DT schema format using json-schema. At the same time, fix a couple of issues with the examples discovered by the validation tool -- a semicolon instead of a comma and wrong node names. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20200521091356.2211020-2-lkundrak@v3.sk Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
|
|
WeiXiong Liao
|
78c08247b9 |
mtd: Support kmsg dumper based on pstore/blk
This introduces mtdpstore, which is similar to mtdoops but more powerful. It uses pstore/blk, and aims to store panic and oops logs to a flash partition, where pstore can later read back and present as files in the mounted pstore filesystem. To make mtdpstore work, the "blkdev" of pstore/blk should be set as MTD device name or MTD device number. For more details, see Documentation/admin-guide/pstore-blk.rst This solves a number of issues: - Work duplication: both of pstore and mtdoops do the same job storing panic/oops log. They have very similar logic, registering to kmsg dumper and storing logs to several chunks one by one. - Layer violations: drivers should provides methods instead of polices. MTD should provide read/write/erase operations, and allow a higher level drivers to provide the chunk management, kmsg dump configuration, etc. - Missing features: pstore provides many additional features, including presenting the logs as files, logging dump time and count, and supporting other frontends like pmsg, console, etc. Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com> Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/ Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.com Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
WeiXiong Liao
|
7dcb7848ba |
pstore/blk: Support non-block storage devices
Add support for non-block devices (e.g. MTD). A non-block driver calls pstore_blk_register_device() to register iself. In addition, pstore/zone is updated to handle non-block devices, where an erase must be done before a write. Without this, there is no way to remove records stored to an MTD. Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com> Link: https://lore.kernel.org/lkml/20200511233229.27745-10-keescook@chromium.org/ Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
David S. Miller
|
1806c13dc2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Joe Perches
|
bdc48fa11e |
checkpatch/coding-style: deprecate 80-column warning
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Miquel Raynal
|
9630a05525 |
mtd: rawnand: Stop using nand_release()
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Now that all drivers have been converted to do not use nand_release() anymore, let's remove this helper. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-63-miquel.raynal@bootlin.com |
|
|
Álvaro Fernández Rojas
|
b1713b5b2c |
dt-bindings: mtd: brcmnand: add v2.1 and v2.2 support
Add brcm,brcmnand-v2.1 and brcm,brcmnand-v2.2 as possible compatible strings to support brcmnand controllers v2.1 and v2.2. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-5-noltari@gmail.com |
|
|
Manivannan Sadhasivam
|
a01822e94e |
dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
Add devicetree YAML binding for Qualcomm Inter-Processor Communication Controller (IPCC) block. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
|
|
Baolin Wang
|
fa75386538 |
dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
Add the Spreadtrum mailbox documentation. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@unisoc.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> |
|
|
Wolfram Sang
|
fad5972a1e |
i2c: add 'single-master' property to generic bindings
It is useful to know if we are the only master on a given bus. Because this is a HW description of the bus, add it to the generic bindings. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Adam Ford
|
d63ed4ff41 |
dt: Add bindings for IDT VersaClock 5P49V5925
IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers. Signed-off-by: Adam Ford <aford173@gmail.com> Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Serge Semin
|
11ea09b9e2 |
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
After being gained by the CCU PLLs the signals must be transformed to be suitable for the clock-consumers. This is done by a set of dividers embedded into the CCU. A first block of dividers is used to create reference clocks for AXI-bus of high-speed peripheral IP-cores of the chip. The second block dividers alter the PLLs output signals to be then consumed by SoC peripheral devices. Both block DT nodes are ordinary clock-providers with standard set of properties supported. But in addition to that each clock provider can be used to reset the corresponding clock domain. This makes the AXI-bus and System Devices CCU DT nodes to be also reset-providers. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Serge Semin
|
aec6adc560 |
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
Baikal-T1 Clocks Control Unit is responsible for transformation of a signal coming from an external oscillator into clocks of various frequencies to propagate them then to the corresponding clocks consumers (either individual IP-blocks or clock domains). In order to create a set of high-frequency clocks the external signal is firstly handled by the embedded into CCU PLLs. So the corresponding dts-node is just a normal clock-provider node with standard set of properties. Note as being part of the Baikal-T1 System Controller its DT node is supposed to be a child the system controller node. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
WeiXiong Liao
|
649304c936 |
Documentation: Add details for pstore/blk
Add details on using pstore/blk, the new backend of pstore to record dumps to block devices, in Documentation/admin-guide/pstore-blk.rst Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com> Link: https://lore.kernel.org/lkml/20200511233229.27745-7-keescook@chromium.org/ Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Pavel Tatashin
|
acf12c5e58 |
ramoops: Add "max-reason" optional field to ramoops DT node
Currently, it is only possible to get kmsg dumps for panic and oops, or just panic, via "no-dump-oops". With "max-reason" it is possible to dump messages for other kmsg_dump events, for example emerg and shutdown. Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/lkml/20200515184434.8470-7-keescook@chromium.org/ Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Kees Cook
|
791205e3ec |
pstore/ram: Introduce max_reason and convert dump_oops
Now that pstore_register() can correctly pass max_reason to the kmesg dump facility, introduce a new "max_reason" module parameter and "max-reason" Device Tree field. The "dump_oops" module parameter and "dump-oops" Device Tree field are now considered deprecated, but are now automatically converted to their corresponding max_reason values when present, though the new max_reason setting has precedence. For struct ramoops_platform_data, the "dump_oops" member is entirely replaced by a new "max_reason" member, with the only existing user updated in place. Additionally remove the "reason" filter logic from ramoops_pstore_write(), as that is not specifically needed anymore, though technically this is a change in behavior for any ramoops users also setting the printk.always_kmsg_dump boot param, which will cause ramoops to behave as if max_reason was set to KMSG_DUMP_MAX. Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/ Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Serge Semin
|
0029d09795 |
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding. Even though the corresponding node is supposed to be a child of the Baikal-T1 System Controller, its reg property is left required for compatibility. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Serge Semin
|
25d11e9ebe |
dt-bindings: i2c: Convert DW I2C slave to the DW I2C master example
dtc currently doesn't support I2C_OWN_SLAVE_ADDRESS flag set in the i2c "reg" property. If dtc finds an i2c-slave sub-node having an address higher than ten-bits wide it'll print an ugly warning: Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64: I2C bus unit address format error, expected "40000064" Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64:reg: I2C address must be less than 10-bits, got "0x40000064" In order to silence dtc up let's replace the corresponding DT binding example with a normal DW I2C master mode-based one. It's done by clearing the I2C_OWN_SLAVE_ADDRESS bit in the reg property and converting the sub-node to be compatible with normal EEPROM like "atmel,24c02". Just revert this commit when dtc is fixed. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Serge Semin
|
3264d9e5cf |
dt-bindings: i2c: Convert DW I2C binding to DT schema
Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces Synopsys DW I2C legacy bare text bindings with YAML file. As before the bindings file states that the corresponding dts node is supposed to be compatible either with generic DW I2C controller or with Microsemi Ocelot SoC I2C one, to have registers, interrupts and clocks properties. In addition the node may have clock-frequency, i2c-sda-hold-time-ns, i2c-scl-falling-time-ns and i2c-sda-falling-time-ns optional properties. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Thomas Gleixner
|
76fe06c1e6 |
irqchip updates for Linux 5.8:
- A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI) - A cleanup of the __irq_domain_add() API - A cleanup of the IRQ simulator to actually use some of the irq infrastructure - Some fixes for the Sifive PLIC when used in a multi-controller context - Fixes for the GICv3 ITS to spread interrupts according to the load of each CPU, and to honor managed interrupts - Numerous cleanups and documentation fixes -----BEGIN PGP SIGNATURE----- iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl7Q/OQPHG1hekBrZXJu ZWwub3JnAAoJECPQ0LrRPXpD/vQQAKnqdQ/RD1anm7mHNXzzbEnd9zqoke7er1EM kkZioYJ7KAFEc5SMHiyWwoAfxBvJ1hh/9d48N3dXVdNNaBezpS1uSyviUP92ofzL ZS+aEEyPA3CLAkYzJKmMUQ2LrLpdMc4QM7G+nHgquk0UBT1aNpduDoMRqToPpJ5C ZXfVjhZ8gaM//sueB2aRZZUGmu8lAqXiNBUn+encBFfCVp1iydBlumwD//viTD/g BMO956DAfzoVqb/0n/ZqdftbNR5gtb8wb5POH8I36HOfmqUIdF78OuRhzCm/Odqf uV/eRQ4tDgMVM5PuHNYACGax2DWRRlHVK1wCXcEgj9Wh1p2a7moPOq0zZuREQaEw 4DyIi2VeK1MDkWv4NrPSuVupicwAioha9wVeSnfm9SkKAo1GEj5gHs49MUKas11s ikVLzYCenRfdviu54P0axI1x5HCTvPTXuosPR8Sn7kMQhxQuZxMrYo+9X8WudVOU oEPmK1khRQaU+sf2+wPWvwWt6LMcVzTwWWsXarhWDN1H+budTulpxKsfb0b0rxCp 2viQJ+ncCks1usFrsmuD0bqxyJShDgqFMz46z0R6PYYO/4bJFU5t4UVjIsW1bJZV Vrnkkf9Aw6OiAV5eR7hsRDlYw8tRGm8CZiLRr3szVu4Py9RC4KdoprPf3xn78qqV TIujPzK6 =RX31 -----END PGP SIGNATURE----- Merge tag 'irqchip-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI) - A cleanup of the __irq_domain_add() API - A cleanup of the IRQ simulator to actually use some of the irq infrastructure - Some fixes for the Sifive PLIC when used in a multi-controller context - Fixes for the GICv3 ITS to spread interrupts according to the load of each CPU, and to honor managed interrupts - Numerous cleanups and documentation fixes |
|
|
Bartosz Golaszewski
|
91f3fd1124 |
dt-bindings: net: rename the bindings document for MediaTek STAR EMAC
The driver itself was renamed before getting merged into mainline, but the binding document kept the old name. This makes both names consistent. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Fugang Duan
|
29884aa680 |
dt-bindings: net: imx-dwmac: Add NXP imx8 DWMAC glue layer
Add description for NXP imx8 families like imx8mp/imx8dxl that integrate the Synopsys gmac IP version 5.10a. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Mark Brown
|
fb02b9eb4e
|
Merge remote-tracking branch 'spi/for-5.8' into spi-next | |
|
Thierry Reding
|
8f8986e932 |
dt-bindings: Merge gpio-usb-b-connector with usb-connector
The binding for usb-connector is a superset of gpio-usb-b-connector. One major difference is that gpio-usb-b-connector requires at least one of the vbus-gpios and id-gpios properties to be specified. Merge the two bindings by adding the compatible string combination for the GPIO USB-B variant and an extra conditional for the required properties list to the usb-connector.yaml file. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Geert Uytterhoeven
|
41a053886b |
dt-bindings: timer: renesas: cmt: Convert to json-schema
Convert the Renesas Compare Match Timer (CMT) Device Tree binding documentation to json-schema. Document missing properties. Update the example to match reality. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Anson Huang
|
dff49d55e0 |
dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
Convert the i.MX8QXP LPCG binding to DT schema format using json-schema. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> [robh: add additionalProperties] Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Anson Huang
|
df8cad689e |
dt-bindings: timer: Convert i.MX GPT to json-schema
Convert the i.MX GPT binding to DT schema format using json-schema. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Lad Prabhakar
|
fafcc40fd5 |
dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
Add thermal sensor support for r8a7742 SoC. The Renesas RZ/G1H (r8a7742) thermal sensor module is identical to the R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,rcar-gen2-thermal". Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Akash Asthana
|
41d455bda2 |
dt-bindings: serial: Add binding for UART pin swap
Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Akash Asthana
|
add953dc47 |
dt-bindings: geni-se: Add interconnect binding for GENI QUP
Add documentation for the interconnect and interconnect-names properties for the GENI QUP. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Akash Asthana
|
3c2088430d |
dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
Convert QUP geni-se bindings to DT schema format using json-schema. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> [robh: Fix up example warnings] Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Anson Huang
|
81227f49bd
|
dt-bindings: regulator: Convert anatop regulator to json-schema
Convert the anatop regulator binding to DT schema format using json-schema. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1590717551-20772-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Lad Prabhakar
|
b6f10d3f2e
|
dt-bindings: ASoC: renesas,rsnd: Add r8a7742 support
Document RZ/G1H (R8A7742) SoC bindings. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1590526904-13855-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> |