Commit Graph

82 Commits

Author SHA1 Message Date
Devendra Naga d99b5ac65e staging/slicoss: disable pci device at remove
at probe we enabled the device, and we should disable it at remove.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 17:26:02 -07:00
Devendra Naga 0ab1900539 staging/slicoss: return -ENODEV if no devid matches
if no case matches we are simply asserting and doing break.
and i think we may need to return that -ENODEV , no device is
present, rather assert'ing.

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09 13:06:21 -07:00
Devendra Naga 2add5f4661 staging/slicoss: remove not-needed ASSERT
As the private pointer is valid at the remove of driver, and remove wont' be called if probe fails, so no point for checking of ASSERT

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09 13:06:21 -07:00
Justin P. Mattock 493b67b73c staging: slicoss: Fix a typo.
The below patch fixes a typo found while reading through staging/slicoss

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-18 17:23:52 -07:00
Greg Kroah-Hartman 2140dc9ce7 staging: clean up Greg's email address in some TODO files
My old email address was in some TODO files, so this fixes that issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-15 14:45:40 -08:00
Randy Dunlap 07de7a5ecb staging: slicoss depends on NET
The slicoss driver uses network interfaces so it should depend
on NET.  Fixes the following build errors:

ERROR: "eth_change_mtu" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "eth_validate_addr" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "register_netdev" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "alloc_etherdev_mqs" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "__netif_schedule" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "netif_rx" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "eth_type_trans" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "skb_put" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "skb_pull" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "__alloc_skb" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "free_netdev" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "unregister_netdev" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "consume_skb" [drivers/staging/slicoss/slicoss.ko] undefined!
ERROR: "dev_kfree_skb_irq" [drivers/staging/slicoss/slicoss.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 15:00:48 -08:00
Linus Torvalds edb34a4dbd Remove stale "depends on NETDEV_1000"in staging drivers
Mark Einon points out that the Kconfig option for NETDEV_1000 no longer
exists, and the merge of the staging drivers should have removed that
for the et131x driver.

And while checking for it, I noticed that slicoss had the same stale
dependency.  Remove that one too.

Reported-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-26 17:21:19 +02:00
Jiri Pirko afc4b13df1 net: remove use of ndo_set_multicast_list in drivers
replace it by ndo_set_rx_mode

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17 20:22:03 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Vasiliy Kulikov 20caa14c59 staging: slicoss: use free_netdev(netdev) instead of kfree()
Freeing netdev without free_netdev() leads to net, tx leaks.
I might lead to dereferencing freed pointer.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

@@
struct net_device* dev;
@@

-kfree(dev)
+free_netdev(dev)

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-30 04:14:21 -07:00
Denis Kirjanov 1033f1f7ef Staging: slicoss: Remove explicit arch dependencies
Remove explicit arch dependencies

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31 11:52:28 -07:00
Denis Kirjanov 9092de6df3 Staging: slicoss: Remove net_device_stats from the driver's private
Remove net_device_stats from the driver's private.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-02 18:25:26 -07:00
Denis Kirjanov 4d6ea9c322 Staging: slicoss: kill functions prototypes and reorder functions
Reorder functions to kill their prototypes.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-22 11:05:20 -07:00
Kulikov Vasiliy 78af7f826b staging: slicoss: error handling with goto
This patch makes error handling more readable due to 'goto err' pattern.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-08 13:16:43 -07:00
Kulikov Vasiliy 3746bfd51d staging: slicoss: error handling with goto
This patch makes error handling more readable due to 'goto err' pattern.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-08 13:16:43 -07:00
Kulikov Vasiliy 9020dea380 staging: slicoss: Remove STATUS_XXX defines.
Remove defines of STATUS_XXX from header file.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-08 13:16:43 -07:00
Kulikov Vasiliy d19397860a staging: slicoss: Change return codes to -EYYY.
Change defined STATUS_XXX return codes to standard -EYYY.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-08 13:16:43 -07:00
Jiri Pirko 22bedad3ce net: convert multicast list to list_head
Converts the list and the core manipulating with it to be the same as uc_list.

+uses two functions for adding/removing mc address (normal and "global"
 variant) instead of a function parameter.
+removes dev_mcast.c completely.
+exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for
 manipulation with lists on a sandbox (used in bonding and 80211 drivers)

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:22:15 -07:00
Greg Kroah-Hartman f341dddf1d Staging: merge staging patches into Linus's main branch
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch.  This merge resolves those merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-04 08:39:02 -08:00
Joe Perches c7e10c9956 Staging: Fix continuation line formats
String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:55 -08:00
Ben Hutchings 5d929a7190 staging: declare MODULE_FIRMWARE in various drivers
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:43 -08:00
kirjanov@gmail.com a5c252411f staging: slicoss Use pci_set_consistent_dma_mask.
Use pci_set_consistent_dma_mask() in the case of 64-bit consistent allocations.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com 30ae835f89 staging: slicoss Use compare_ether_addr.
Use compare_ether_addr.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com 5d372900aa staging: slicoss Use PCI_DEVICE_TABLE.
Use PCI_DEVICE_TABLE: defines array as const and puts
it into the __devinitconst section.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com 6c7aeb654d staging: slicoss Use dev->stats rather than adapter->stats.
Use dev->stats rather than adapter->stats.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com d9c057ab0b staging: slicoss No need to check pointer in debugfs_remove()
No need to check pointer expicitly since it has been done in debugfs_remove()

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com f8771fa67d staging: slicoss No need type casting when using netdev_priv
No need type casting when using netdev_priv.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com a71b997881 staging: slicoss Check for valid hw address
Check for valid hw address.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
kirjanov@gmail.com 203fe0d2e9 staging: slicoss Convert to netdev_tx_t
Convert to netdev_tx_t.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03 16:42:28 -08:00
Jiri Pirko d59079425f staging: convert to use netdev_for_each_mc_addr
removed needless checks in arlan-main.c and slicoss.c
fixed bug in et131x_netdev.c to actually fill addresses in.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18 14:47:51 -08:00
Jiri Pirko 4cd24eaf0c net: use netdev_mc_count and netdev_mc_empty when appropriate
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss
anything). Used spatch and did small tweaks and conding style changes when
it was suitable.

Jirka

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 11:38:58 -08:00
Julia Lawall 72c71f4827 Staging: slicoss: remove duplicate structure field initialization
The definition of slic_netdev_ops has initializations of a local function
and eth_mac_addr for its ndo_set_mac_address field.  This change uses only
the local function.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 12:23:05 -08:00
Stoyan Gaydarov b6ac161364 Staging: ARRAY_SIZE changes
These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 12:02:06 -07:00
Patrick McHardy 6ed106549d net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions
This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05 19:16:04 -07:00
Greg Kroah-Hartman 04b17c935b Staging: slicoss: fix build warnings
This fixes some build warnings in the slicoss driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19 11:00:55 -07:00
Jean Delvare b0f434a7e9 Staging: slicoss: Add missing __devexit_p()
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-19 11:00:55 -07:00
Stephen Hemminger 1a92e82a86 staging: slicoss: update README
I looked, I gagged, I left

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17 11:06:31 -07:00
Lior Dotan f7ed550b3e Revert Staging: SLICOSS: use gfp_kernel where possible
Revert commit 2bb347361e

This commit has been reported to cause problems:
  Mar 24 11:50:31 linuxdev kernel: BUG: sleeping function called from invalid context at mm/slub.c:1599 Mar 24 11:50:31 linuxdev kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 3251, name: avahi-daemon

Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17 11:06:27 -07:00
Alexander Beregalov 79bd1096bb Staging: slicoss: convert to netdev_ops
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17 11:06:25 -07:00
Yang Hongyang 6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Greg Kroah-Hartman 976c032faa Staging: slicoss: slichw.h cleanup
Lots of spaces->tabs cleanups for slichw.h

It's much more sane and "Linux-like" now.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:08 -07:00
Greg Kroah-Hartman a750c1c525 Staging: slicoss: delete slicdbg.h
Move the ASSERT macro into slicoss.c as that's all that is currently
being used.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:08 -07:00
Greg Kroah-Hartman 8665b18474 Staging: slicoss: remove ASSERTMSG macro
No one uses it, so drop it.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:08 -07:00
Greg Kroah-Hartman 4bee4f6034 Staging: slicoss: remove DBG_ERROR macro
Use the dev_err() call instead, it is the standard and provides much
more information.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:08 -07:00
Greg Kroah-Hartman e5bac59803 Staging: slicoss: remove SLICLEVEL and SLIC_DISPLAY macros
They aren't needed or used anymore.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:08 -07:00
Greg Kroah-Hartman e52011e476 Staging: slicoss: remove SLIC_ETHTOOL_SUPPORT
It was always enabled, so just always use it.

Cleaned up the ioctl code a bit as well to make it more readable.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:07 -07:00
Greg Kroah-Hartman e8bc9b7a20 Staging: slicoss: remove DBG_MSG
It's not being used for anything, so delete it and all instances of it.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:07 -07:00
Greg Kroah-Hartman 47881dd946 Staging: slicoss: remove VALID_ADDRESS macro
It's quite wierd, and doesn't even do anything on x86_64, so just delete
it.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:07 -07:00
Greg Kroah-Hartman a0a1cbef86 Staging: slicoss: remove SLIC_PING_TIMER_ENABLED
It was always enabled, so just enable it properly.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:07 -07:00
Greg Kroah-Hartman 04ac01caa6 Staging: slicoss: remove LINUX_FREES_ADAPTER_RESOURCES
It was always enabled, so just enable it and take out the one place it
was being used.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:07 -07:00