Commit Graph

547 Commits

Author SHA1 Message Date
Thomas Lorblanches a0c1424acb hwmon: (it87) Add support for IT8786E
IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck 0ea2f1db8e hwmon: (jc42) Add support for additional IDT temperature sensors
TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck 7bc32d298b hwmon: (it87) Add support for IT8781F
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Kevin Hilman add513be1c hwmon: (ina2xx) Add ina231 compatible string
Add support for "ina231" as compatible string, and update
Documentation and Kconfig accordingly.

Tested with the Exynos5422-based odroid-xu3 board which has on-board
INA231 sensors.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski 72a87a47a8 hwmon: (ina2xx) implement update_interval attribute for ina226
This attribute allows to configure the update interval of ina226. Although
the bus and shunt voltage conversion times remain hardcoded to 1.1 ms, we can
now modify said interval by changing the averaging rate.

While we're at it - add an additional variable to ina2xx_data, which holds
the current configuration settings - this way we'll be able to restore the
configuration in case of an unexpected chip reset.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Bartosz Golaszewski 8a5fc79513 hwmon: (ina2xx) make shunt resistance configurable at run-time
The shunt resistance can only be set via platform_data or device tree. This
isn't suitable for devices in which the shunt resistance can change/isn't
known at boot-time.

Add a sysfs attribute that allows to read and set the shunt resistance.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-01-25 21:23:59 -08:00
Guenter Roeck 907a6d5824 hwmon: (tmp401) Detect TMP435 on all addresses it supports
TMP435 supports a range of I2C addresses, not just 0x4c.

Cc: Patrick Titiano <ptitiano@baylibre.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-08 06:48:37 -08:00
Patrick Titiano 06adbaec2a hwmon: (tmp401) Add support for TI TMP435
Signed-off-by: Patrick Titiano <ptitiano@baylibre.com>
[Bartosz Golaszewski: prepared for submission, code review fixes]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Guenter Roeck: Merged two patches into one]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-04 10:59:42 -08:00
Guenter Roeck dfcd4c53be hwmon: (lm95234) Add support for LM95233
LM95233 is similar to LM95234, but it only supports two
instead of four external temperature sensors.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 06:11:53 -08:00
Guenter Roeck 162a8dfe73 hwmon: (lm95245) Add support for LM95235
LM95235 is register compatible to LM95245.

Also update link to LM95245 data sheet, and drop the link to the
datasheet from the driver source to simplify code maintenance.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-12-02 03:44:18 -08:00
Guenter Roeck 8aefb93f09 hwmon: (nct6775) Add support for NCT6792D
NCT6792D is similar to NCT6791D. Only beep control and temperature
monitoring registers are different.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck b6e6dd8e9f hwmon: (nct6775) Documentation updates
Document support for NCT6102D/NCT6104D/NCT6106D and NCT6791D.
Document that NCT5573D is compatible to NCT6775F with the same chip ID.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Michael Thalmeier 799fc60214 hwmon: (lm75) Add support for the NXP LM75B
It is basically a faster lm75 with improved (11 bit) resolution.

Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck 3434f37835 hwmon: Driver for Nuvoton NCT7802Y
NCT7802Y is an I2C based hardware monitoring chip from Nuvoton.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-30 20:13:13 -08:00
Guenter Roeck 7ad8966f4f Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUItc7AAoJEFGvii+H/HdhxTEP/A0Gg35acsBa8JPWUGuTcGTi
 GHDdnDh1sJtJWadKhs+JV9tOX80YY/5OaHr0TKXcb0eAZopqG4G4yyJXmju+rkFn
 sp4nQ4QzM8gNzmVpo6K45xdZw913QQbVcwDThnZwq1xMHVvMT2TFZ+PQLXZ2e2kN
 HRs65Ftw9geNlZ6cLSXPa+fmhbhC90izXRYB/+eSv9LfxJkARVBtRwVkjLnbe52h
 V7gm/sqcdLs4S0Iauv3qPCjmNCtLWjzJsjq+umiEmmwRvWXGHcLWxCSbmrMsi075
 VmMTY1G+ys2OaNo4wpMEx3s2+Cg/dxyMKfuJn3Zz+Wk196v4UaQWFKBfH8IcjcuJ
 zKy9RntFZ6Esut/PeaMlk7nlgkSXOEbQZFcMDhn8LFwL8LzVDUIMtmcIEsfwHfme
 SWGt6lYUkeSC0yxdylYtIvAKVhkSInkg0z7YiChB0eHflBgWsNn4r8v5iGk9yAXu
 keR9sQlXKS2gFbMtZ8e+VgNVqPmapJx+1E1F5/JbjVpiQG+fzsleHi9UF91pyLJL
 IGZM51l2FEMBMuKSNEUy+mcLX4Y/63iEg3fGvv5nX52A0MVrL47ADDJSEoaZoUpg
 Yz3AW/+yYKi5cmcZ7sUirrCHawvfIYGeR1jZjYaIk8lAeqjFHTDzayIXUoOoQfN7
 vi+fRCxYLA/Z/Rnfylmt
 =keMM
 -----END PGP SIGNATURE-----

Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-next

Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24 09:25:06 -07:00
Andreas Werner 964356938f hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver
Added driver to support the 14F021P00 BMC Hardware Monitoring.
The BMC is a Board Management Controller including monitoring of the
board voltages.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24 15:36:33 +01:00
Aravind Gopalakrishnan f89ce2706d hwmon: (k10temp) Add support for F15h M60h
This patch adds temperature monitoring support for F15h M60h processor.
 - Add new pci device id for the relevant processor
 - The functionality of REG_REPORTED_TEMPERATURE is moved to
   D0F0xBC_xD820_0CA4 [Reported Temperature Control]
   - So, use this to get CUR_TEMP value
   - Since we need an indirect register access, protect this with
     a mutex lock
 - Add Kconfig, Doc entries to indicate support for this processor.

Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
[Guenter Roeck: Declare new mutex and function static]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-22 11:14:52 -07:00
Kamil Debski d82d57767c hwmon: Add pwm-fan driver
The pwm-fan driver enables control of fans connected to PWM lines.
This driver uses the PWM framework, so it is compatible with all
PWM devices that provide drivers through the PWM framework.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
[Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Neelesh Gupta 24c1aa8587 hwmon: (powerpc/powernv) hwmon driver for power, fan rpm, voltage and temperature
This patch adds basic kernel support for reading power values, fan
speed rpm, voltage and temperature data on powernv platforms which
will be exported to user space through sysfs interface.

Test results:
-------------
[root@tul163p1 ~]# sensors
ibmpowernv-isa-0000
Adapter: ISA adapter
fan1:        5465 RPM  (min =    0 RPM)
fan2:        5152 RPM  (min =    0 RPM)
fan3:        5521 RPM  (min =    0 RPM)
fan4:        4891 RPM  (min =    0 RPM)
fan5:           0 RPM  (min =    0 RPM)
fan6:           0 RPM  (min =    0 RPM)
fan7:        7480 RPM  (min =    0 RPM)
fan8:        7944 RPM  (min =    0 RPM)
temp1:        +39.0°C  (high =  +0.0°C)
power1:      190.00 W

[root@tul163p1 ~]# ls /sys/devices/platform/
alarmtimer  ibmpowernv.0  power  rtc-generic  serial8250  uevent
[root@tul163p1 ~]# ls /sys/devices/platform/ibmpowernv.0/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]# ls /sys/class/hwmon/hwmon0/
device	    fan2_min	fan4_min    fan6_min	fan8_min   power
fan1_fault  fan3_fault	fan5_fault  fan7_fault	in1_fault  power1_input
fan1_input  fan3_input	fan5_input  fan7_input	in2_fault  subsystem
fan1_min    fan3_min	fan5_min    fan7_min	in3_fault  temp1_input
fan2_fault  fan4_fault	fan6_fault  fan8_fault	in4_fault  temp1_max
fan2_input  fan4_input	fan6_input  fan8_input	name	   uevent
[root@tul163p1 ~]#

Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Zhu, Richard \(NSN - CN/Beijing\) a8bfeceb0c hwmon: (pmbus) Add tps40422 front-end driver
For TI power management chip TPS40422, READ_TEMPERATURE_2 command is supported on
page 1 of the chip, but the original driver(pmbus.c) only tried to detect this command
on page 0, this will lead to a result that the temperature sensor in page 1 couldn't
be detected. This change is to isolate the tps40422 driver from pmbus.c into a solo
front-end driver.

Signed-off-by: Zhu Laiwen <richard.zhu@nsn.com>
[Guenter Roeck: Dropped unnecessary license text (fixes checkpatch warning)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00
Guenter Roeck 05c77ab240 hwmon: (tmp421) Add support for TMP441 and TMP442
TMP441 and TMP442 are compatible to TMP421 and TMP422.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:38 -07:00
Guenter Roeck a63ee9d83b hwmon: (tmp421) Strengthen detect function
Not all supported chips support the entire I2C address range.
Only accept specific chips at the addresses supported by that chip.
Check for invalid values in conversion rate and status registers.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-08-04 07:01:37 -07:00
Johannes Pointner ed67f0872b hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS
This patch adds support for the ntc thermistor B57330V2103 from EPCOS.

Signed-off-by: Johannes Pointner <johannes.pointner@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:35 -07:00
Frans Klaver c83959f89f hwmon: (lm75) Add support for TMP112
TMP112 is compatible to LM75.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:34 -07:00
Heiko Schocher d17a7dca04 hwmon: Driver for TI TMP103 temperature sensor
Driver for the TI TMP103.

The TI TMP103 is similar to the TMP102.  It differs from the TMP102
by having only 8 bit registers.

Signed-off-by: Heiko Schocher <hs@denx.de>
[linux@roeck-us.net: Select REGMAP_I2C in Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Scott Kanowitz f4ff415564 hwmon: Add support for Lattice's POWR1220 power manager IC
This patch adds support for Lattice's POWR1220 power manager IC. Read
access to all the ADCs on the chip are supported through the hwmon
sysfs files.

Signed-off-by: Scott Kanowitz <skanowitz@echo360.com>
[Guenter Roeck: Removed some extra ( )]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:33 -07:00
Naveen Krishna Chatradhi 8b6f5e0f19 hwmon: (ntc_thermistor) Use the manufacturer name properly
Murata Manufacturing Co., Ltd is the vendor for
NTC (Negative Temperature coefficient) based Thermistors.
But, the driver extensively uses "NTC" as the vendor name.

This patch corrects the vendor name also updates the
compatibility strings according to the vendor-prefix.txt

Note: Drivers continue to support the previous compatible strings
but further addition of these compatible strings in device tree
is deprecated.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-25 07:09:13 -07:00
Tomas Pop 1a539d372e hwmon: add support for Sensirion SHTC1 sensor
Add support for Sensirion SHTC1 and compatible temperature and humidity
sensors.

Signed-off-by: Tomas Pop <tomas.pop@sensirion.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-06-12 08:36:48 -07:00
Linus Torvalds f456205265 New driver for NCT6683D
New chip support to existing drivers:
 	Add support for STTS2004 and AT30TSE004 to jc42 driver
 	Add support for EMC1402/EMC1412/EMC1422 to emc1403 driver
 
 Other notable changes:
 	Document hwmon kernel API
 	Convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421,
 	and tmp102 drivers to use new hwmon API functions
 	Replace function macros in lm80, lm92, and jc42 drivers with
 	real code
 	Convert emc1403 driver to use regmap, add support for additional
 	attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
 	Various additional cleanup and minor bug fixes in several drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjUZbAAoJEMsfJm/On5mBnY4P/A15UCpfNzNa/tYzHUYtb0/Y
 7yI6fEWhgSegiWuWl3I7jOJrz+uU2emrIdOVW1ci8Y7WNjoL+TWYTlvvwf0OYwMz
 k7duMcNWcIOzBAm+swyaKvPQjoLcxtKYn+pSCxb1dzVkjzpelnjHctBNnfbvrNQt
 FCMs+t2azIZGkgNf9G1U/uV702/vKKYWrBc69/EB3osDxSRLKvM2sPqnScxmBR6q
 oohZ5pxbpDhO0gXc9s7AprUFf4puMEWw6eul3QPMzBAgZqh44iOv+yNvJk6pjG5L
 FwWkand4U2BVMGY3+dnBCeA8fsYq9owPCK8WN+5NI1W+CLMnKQFHK4iOEDbiaSHH
 PsgGrFnj5ArVxcmPKUQ3l2nWQcwXUvuBTxRmc707HNLt93y2JrdIncdSnhNR5PVk
 nlUNwTXCqfQmv0aY/yTDIzrgYfXXxhngaw59kEZXBPyO7rH7IcXZw6sq/scn8+G3
 Nd8lHLaFOAZwZVNU1hUWkow88t/NwkW/CZ2c2796pjsjAuJfBS1P+C4hkkUQ7+QB
 SavLg8S9E+Ienxacx2tZs8OdcAXsvlrHMeM0TTiWLbKPosDz3FbwbPeqlCpcVQAY
 kSPIXA+l1Dps0v8Yf6pdJCL1eX1jyzdfA+YKMT0aCPALTQYEPQXAE4Nced+qCZ52
 1vm6eTqDAf1KQfOmxxxT
 =dytt
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next

Pull hwmon updates from Guenter Roeck:
 "New driver for NCT6683D

  New chip support to existing drivers:
   - add support for STTS2004 and AT30TSE004 to jc42 driver
   - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver

  Other notable changes:
   - document hwmon kernel API
   - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
     tmp102 drivers to use new hwmon API functions
   - replace function macros in lm80, lm92, and jc42 drivers with real
     code
   - convert emc1403 driver to use regmap, add support for additional
     attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
   - various additional cleanup and minor bug fixes in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
  hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
  hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
  hwmon: (ultra45_env) Introduce managed version of kzalloc
  hwmon: Driver for NCT6683D
  hwmon: (lm80) Rearrange code to avoid forward declarations
  hwmon: (lm80) Convert fan display function macros into functions
  hwmon: (lm80) Convert voltage display function macros into functions
  hwmon: (lm80) Convert temperature display function macros into functions
  hwmon: (lm80) Normalize all temperature values to 16 bit
  hwmon: (lm80) Simplify TEMP_FROM_REG
  hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm83) Rearange code to avoid forward declarations
  hwmon: (lm83) Drop FSF address
  hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max1619) Drop function macros
  hwmon: (max1619) Rearrange code to avoid forward declarations
  hwmon: (max1619) Drop FSF address
  hwmon: (max1619) Fix critical alarm display
  hwmon: (jc42) Add support for STTS2004 and AT30TSE004
  hwmon: (jc42) Convert function macros into functions
  ...
2014-06-03 11:09:43 -07:00
Jean Delvare 0132514588 hwmon: Document temp[1-*]_min_hyst sysfs attribute
The temp[1-*]_min_hyst sysfs attribute is already implemented by 3
hwmon drivers (adt7x10, lm77 and lm92) but was missing from the
standard interface.

Also add temp[1-*]_lcrit_hyst for consistency, even though no driver
implement that one for the time being.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2014-05-25 17:23:07 +02:00
Guenter Roeck 41082d66bf hwmon: Driver for NCT6683D
Nuvoton NCT6683D is an eSIO with hardware monitoring capabilities.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:27 -07:00
Guenter Roeck 175c490c9e hwmon: (jc42) Add support for STTS2004 and AT30TSE004
Also fix links to datasheets for other supported sensors from
ST Microelectronics, and add links to several Atmel datasheets.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:25 -07:00
Guenter Roeck 84899d394e hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-only
All chips in this chip series only support a single hysteresis value. Having
multiple writable hysteresis attributes is therefore confusing, since a single
write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst)
read-only.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:24 -07:00
Guenter Roeck 57d60b1b7e hwmon: (emc1403) Add driver documentation
With the driver now supporting several chip variants,
it is about time to document what is supported.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck a9622663e0 hwmon: Document hwmon kernel API
The hwmon subsystem has been around for a while. Time to document
its kernel API.

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:23 -07:00
Guenter Roeck 50bf46509f hwmon: (lm77) Do not preserve hysteresis when updating critical temp limit
Updating the hysteresis value when updating the critical temperature limit
was following the rule of 'least surprise'. However, it had the undesirable
side effect of changing the hysteresis for all other attributes, which
defeats the purpose of least surprise. In addition, it could result in
invalid hysteresis values if the resulting hysteresis was too large. In such
cases the resulting hysteresis ended up changed anyway, which again defeats
the purpose. So drop that code and document the new behavior.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21 16:02:20 -07:00
Linus Torvalds 3e76b749ea Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon updates from Jean Delvare:
 "This includes a number of driver conversions to
  devm_hwmon_device_register_with_groups, a few cleanups, and
  support for the ITE IT8623E"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (it87) Add support for IT8623E
  hwmon: (it87) Fix IT8603E define name
  hwmon: (lm90) Convert to use hwmon_device_register_with_groups
  hwmon: (lm90) Create all sysfs groups in one call
  hwmon: (lm90) Always use the dev variable in the probe function
  hwmon: (lm90) Create most optional attributes with sysfs_create_group
  hwmon: Avoid initializing the same field twice
  hwmon: (pc87360) Avoid initializing the same field twice
  hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Avoid initializing the same field twice
  hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Create all sysfs groups in one call
  hwmon: (lm63) Introduce 'dev' variable to point to client->dev
  hwmon: (lm63) Add additional sysfs group for temp2_type attribute
  hwmon: (f71805f) Fix author's address
2014-04-05 18:45:11 -07:00
Rudolf Marek 574e9bd8fa hwmon: (it87) Add support for IT8623E
Add support for the IT8623E found on Asus motherboards. It has same
hardware monitoring block as IT8603E.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04 18:01:35 +02:00
Aravind Gopalakrishnan ec0159503a hwmon: (k10temp) Add support for AMD F16 M30h processor
Adding new PCI ID to support AMD F16 M30h processor (Mullins).
While at it, modify Kconfig and Doc files to reflect the
support for newer processors

Note: PCI ID for this processor will make it into pci_ids.h
as part of this patch:
http://marc.info/?l=linux-kernel&m=139291362126057&w=2
which should be pulled into 3.15 when merge window opens
(It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-02 22:09:14 -07:00
Guenter Roeck f76992b00a hwmon: (pmbus/ltc2978) Add support for LTM4676
The chip's programming interface is quite similar to LTC3880
and supports the same set of sensors.

Reviewed-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-19 18:59:40 -07:00
Guenter Roeck a41a8927e7 hwmon: (lm95245) Make temp2_crit_hyst read-only
The hysteresis register is shared among both temperature sensors.
This means changing one also affects the other. To avoid confusion,
established way to express this is to make only the first instance writable
and keep all other instances as read-only. Otherwise users may be
confused that changing the second writable value also affects the first,
while it is more obvious that a writable value may affect a different
read-only value.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
2014-03-03 08:01:06 -08:00
Guenter Roeck b4c9c1a798 hwmon: Driver for TI ADC128D818
ADC128D818 is a System Monitor with Temperature Sensor. It is similar to LM80
and LM96080, but has 16 bit wide sensor registers and no fan speed monitoring.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:04 -08:00
Guenter Roeck 6700ce035f hwmon: Driver for Linear Technologies LTC2945
LTC2945 is a system monitor that measures current, voltage, and power.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:03 -08:00
Guenter Roeck 69e1ded651 hwmon: Driver for Linear Technologies LTC4260
LTC4260 is a Positive Voltage Hot Swap Controller.
The driver currently only supports voltage monitoring, not voltage control.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:03 -08:00
Jean Delvare 7c81c60f37 Update Jean Delvare's e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Rudolf Marek c145d5c628 hwmon: (it87) Add support for the ITE IT8603E
Add support for IT8603E.

This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861

[JD: Fixes and clean-ups.]

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Linus Torvalds 16cd9d1c0f Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon fixes and updates from Jean Delvare:
 "All lm90 driver fixes and improvements"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  Documentation: dt: hwmon: Add OF document for LM90
  hwmon: (lm90) Add power control
  hwmon: (lm90) Add support for TI TMP451
  hwmon: (lm90) Use enums for the indexes of temp8 and temp11
  hwmon: (lm90) Add support to handle IRQ
  hwmon: (lm90) Define status bits
  hwmon: (lm90) Fix max6696 alarm handling
2013-11-15 16:35:10 -08:00
Wei Ni 1daaceb26d hwmon: (lm90) Add support for TI TMP451
TI TMP451 is mostly compatible with ADT7461, except for
local temperature low byte and max conversion rate.
Add support to the LM90 driver.

Signed-off-by: Wei Ni <wni@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-11-15 10:40:39 +01:00
Guenter Roeck 3f08d7f49f hwmon: (pmbus/ltc2978): Add support for LTC2978A
Detect LTC2978A chip ID. Treat it as LC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c24c407e96 hwmon: (pmbus/ltc2978): Add support for LTC2977
LTC2977 is a pin compatible replacement for LTC2978.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:03 -07:00
Guenter Roeck c8ccab7ab5 hwmon: (pmbus/lm25066) Add support for LM25063
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-10-18 09:12:02 -07:00
Linus Torvalds 7b4022fa17 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (emc6w201) Do not declare enum variable
  hwmon: (w83792d) Update module author
2013-09-07 10:54:19 -07:00
Linus Torvalds 2e515bf096 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "The usual trivial updates all over the tree -- mostly typo fixes and
  documentation updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
  doc: Documentation/cputopology.txt fix typo
  treewide: Convert retrun typos to return
  Fix comment typo for init_cma_reserved_pageblock
  Documentation/trace: Correcting and extending tracepoint documentation
  mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
  power: Documentation: Update s2ram link
  doc: fix a typo in Documentation/00-INDEX
  Documentation/printk-formats.txt: No casts needed for u64/s64
  doc: Fix typo "is is" in Documentations
  treewide: Fix printks with 0x%#
  zram: doc fixes
  Documentation/kmemcheck: update kmemcheck documentation
  doc: documentation/hwspinlock.txt fix typo
  PM / Hibernate: add section for resume options
  doc: filesystems : Fix typo in Documentations/filesystems
  scsi/megaraid fixed several typos in comments
  ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
  treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
  page_isolation: Fix a comment typo in test_pages_isolated()
  doc: fix a typo about irq affinity
  ...
2013-09-06 09:36:28 -07:00
Shane Huang f85b520510 hwmon: (w83792d) Update module author
w83792d was written by me in 2004, I'd like to update my first name
into my current one to keep consistent, and delete invalid address.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2013-09-06 14:05:42 +02:00
William Markezana f060c658b8 hwmon: (htu21) Add Measurement Specialties HTU21D support
Signed-off-by: William Markezana <william.markezana@meas-spec.com>
[Guenter Roeck - minor formatting changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-29 09:09:12 -07:00
Wei Hu 30b146d1cb hwmon: (k10temp) Add support for Fam16h (Kabini)
The temperature reporting interface stays the same, so we just
add the PCI-ID to the list.

Verified on AMD Olive Hill.

Signed-off-by: Wei Hu <wei@aristanetworks.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-27 08:28:01 -07:00
Masanari Iida ac20ad14c3 doc: Fix typo "is is" in Documentations
Fix double words "is is" in Documentations.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-27 10:50:52 +02:00
Stefan Huber 780d7bd4eb Documentation/hwmon/abituguru-datasheet fix a typo
Corrected the word adventerous to adventurous.

Signed-off-by: Stefan Huber <steffhip@gmail.com>
Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-20 12:41:10 +02:00
Evgeniy Dushistov 60c1f31fc5 hwmon: (ads1015) Add support for ADS1115
This patch adds support for ads1115 device to ads1015 driver.
Based on work of Emiliano Carnati <carnatiatebneuro.com>.
Tested on ARM CPU based board.

Signed-off-by: Evgeniy A. Dushistov <dushistov@mail.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-11 22:10:40 -07:00
Linus Torvalds ddcf6600b1 New driver to support GMT G762/G763 pwm fan controllers
Add support for DS1631, DS1721, and DS1731 to ds1621 driver
 Remove detect function from ds1621 driver as unreliable
 Bug fixes in nct6775, iio_hwmon, and adm1021 drivers
 Remove redundant platform_set_drvdata in various drivers
 Add device tree support to ina2xx driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0I8LAAoJEMsfJm/On5mBPp8P+wedtxZpljmca+YnuBnZnnZN
 7HLFdGvbwOA+ThfYx7UhpyRgJ+D4ggB0jTiVCPHGUJzmwYjEVk5e9qZkIX/1fBIB
 Iun9TZdJPG+fYFkr8H91dnJcaeELog76yOvx3VRU1QYO11L1wx56oJ2b3a+lnIb5
 UNyovFhvJuZ4jDpzQNUGY5/CMScj2rtPiRPT5NC/3HoSmkXFuV1uw4nhn3C79ycR
 NoZFyjFi7J1hCTB7ExoHHSQBGdLFDXQiEZqNaQS4WXnW1jmiTsQl0rRLoP5KqUDU
 3NovVA557nOfOHAjB98nQrBM7Syn2jKYeZP+M5OR1iKIXxv5uUs/Ajmpnk5x2t1d
 Wf5uHW99SEDTn19U8icgOO4zLvNX0lSXHs+FC6hzKTpLp/FLVjP2uOYj9TcxtPzn
 pLAYsE5UIySH4ybJ0Jdf2pKA+8D2eAOVo1joFhaoz8qFjMNdSxBlf8/xOUsBaJoi
 dAQ/SmWc9z0Tk03Hxn1b/XVKHLbb3AIpPTe1PCK9bUBzLQyZp2UmBmSPHIVxdjO/
 zyRABp64pkoVMqomJPzujEgT2NaqSfr+wwLyUOPBtmaMM8N6aOUlRjrJyOHrSrmB
 3CTT23h8xp8lEgjezQ0jYlhNQPgpGmlu/yuFfL2GyqRw00clAkUem0BrstZg0EOD
 lepSJCaSpyqr3jfhIBwN
 =OdGw
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - new driver to support GMT G762/G763 pwm fan controllers
 - add support for DS1631, DS1721, and DS1731 to ds1621 driver
 - remove detect function from ds1621 driver as unreliable
 - bug fixes in nct6775, iio_hwmon, and adm1021 drivers
 - remove redundant platform_set_drvdata in various drivers
 - add device tree support to ina2xx driver

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ds1621) Fix temperature rounding operations
  hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775
  hwmon: (nct6775) Fix temperature alarm attributes
  Add support for GMT G762/G763 PWM fan controllers
  hwmon: (ina2xx) Add device tree support to pass the shunt resistor
  hwmon: (ds1621) Update documentation
  hwmon: (ds1621) Add DS1731 chip support to ds1621 driver
  hwmon: (iio_hwmon) add alias table
  hwmon: (adm1021) Do not create min sysfs attributes for LM84
  hwmon: (ds1621) Remove detect function
  hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation
  hwmon: (ds1621) Add ds1721 update interval sysfs attribute
  hwmon: (ds1621) Add ds1721 chip support
  hwmon: (w83627ehf) Remove redundant platform_set_drvdata()
  hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata()
  hwmon: (i5k_amb) Remove redundant platform_set_drvdata()
  hwmon: (coretemp) Remove redundant platform_set_drvdata()
  hwmon: (abituguru3) Remove redundant platform_set_drvdata()
2013-07-03 19:56:35 -07:00
Arnaud Ebalard 594fbe713b Add support for GMT G762/G763 PWM fan controllers
GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:42 -07:00
Tang Yuantian 31e7ad74f6 hwmon: (ina2xx) Add device tree support to pass the shunt resistor
Adding another way that is device tree to pass the shunt resistor
value to driver except for platform data.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
[Guenter Roeck: Added missing of.h include]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:42 -07:00
Robert Coulson 87438c2c54 hwmon: (ds1621) Update documentation
Replace some written information with tables to improve readability
and to simplify adding newer devices in the future.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:40 -07:00
Robert Coulson 260f81ffc1 hwmon: (ds1621) Add DS1731 chip support to ds1621 driver
These changes add DS1731 chip support to the ds1621 driver,
Kconfig, and documentation.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:30:43 -07:00
Robert Coulson ed7c34e89d hwmon: (ds1621) Remove detect function
Due to a lack of device and vendor identification registers, the
Dallas/Maxim DS16xx devices cannot be uniquely detected, sometimes
resulting in false positives. Therefore, the detect function is
being removed in favor of explicit device instantiation.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:02 -07:00
Robert Coulson 79c1cc1c90 hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation
Add definitions, information, and code for ds1631 chip support
to the ds1621 driver.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:02 -07:00
Robert Coulson 3a8fe33155 hwmon: (ds1621) Add ds1721 update interval sysfs attribute
The ds1721 device can be configured for 9..12 bit resolutions;
add a sysfs attribute for userspace to configure this attribute.
The definition, description, details, and usage are shown in the
documentation and were crafted from an LM73 driver patch done by
Chris Verges & Guenter Roeck).

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:29:01 -07:00
Robert Coulson cd6c8a4297 hwmon: (ds1621) Add ds1721 chip support
Update the ds1621 documentation, driver, and Kconfig with
ds1721 chip support.

Signed-off-by: Robert Coulson <rob.coulson@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:28:59 -07:00
Stephen Rothwell 40b313608a Finally eradicate CONFIG_HOTPLUG
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 14:20:18 -07:00
Jean Delvare 3fbc81e3c0 hwmon: (lm75) Add support for the Dallas/Maxim DS7505
Basically it's the same as the original DS75 but much faster.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2013-05-04 14:49:36 +02:00
Jean Delvare 0cd2c72d76 hwmon: (lm75) Tune resolution and sample time per chip
Most LM75-compatible chips can either sample much faster or with a
much better resolution than the original LM75 chip. So far the lm75
driver did not let the user take benefit of these improvements. Do it
now.

I decided to almost always configure the chip to use the best
resolution possible, which also means the longest sample time. The
only chips for which I didn't are the DS75, DS1775 and STDS75, because
they are really too slow in 12-bit mode (1.2 to 1.5 second worst case)
so I went for 11-bit mode as a more reasonable tradeoff. This choice is
dictated by the fact that the hwmon subsystem is meant for system
monitoring, it has never been supposed to be ultra-fast, and as a
matter of fact we do cache the sampled values in almost all drivers.

If anyone isn't pleased with these default settings, they can always
introduce a platform data structure or DT support for the lm75. That
being said, it seems nobody ever complained that the driver wouldn't
refresh the value faster than every 1.5 second, and the change made
it faster for all chips even in 12-bit mode, so I don't expect any
complaint.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2013-05-04 14:49:36 +02:00
Linus Torvalds 151173e8ce Highlights:
- OpenFirmware/DeviceTree support for the Power Supply core: the core now
   automatically populates supplied_from hierarchy from the device tree.
   With these patches chargers and batteries can now lookup each other
   without the board files support shim. Rhyland Klein at NVIDIA did the
   work;
 
 - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the
   AB85xx core and depends on some recent changes to it, so that is why the
   driver comes through the battery tree. It has an appropriate ack from
   the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson
   and Hongbo Zhang at Linaro authored the driver;
 
 - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes
   touch mfd parts, but these were acked by the appropriate MFD maintainer
   (i.e. Samuel Ortiz). Lee Jones at Linaro did most of the work and lead
   the submission process.
 
 Minor changes, but still worth mentioning:
 
 - Battery temperature reporting fix for Nokia N900 phones;
 - Versatile Express poweroff driver moved into drivers/power/reset/.
 - Tree-wise: use devm_kzalloc() where appropriate;
 - Tree-wise: dev_pm_ops cleanups/fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf1BPAAoJEGgI9fZJve1bwyoP/3Gv+qStzbN7mUtIVEvH3EAe
 aVJwlODFzEZjk5xoiw7Dc8PuBE8O948hWOnQyCuUQ8+OfK6SyNIjexPYy3Z25a0F
 cX9JMj7rtPWHvxo2q/YuKwBPZoxj/JIPyxwUT7akwXoHAV059fvcy9R1DfFX2Qur
 hSP0NXTg+guvEpxGV4bC2l+LWZPmDFK9n0RsorttYaBvsiRDWl0c2TY2byofYlBw
 ++m/rI8Qgl8db8pKq/WDue62HtMt3kmZj6ZIgej3Wb0+GIRmYHMyPIyAkf82Wlw2
 g2sGNPT7cstrSNOozegzJ7UghJObcYDFf10NCgvFMNjmAT1dAwdneQHEWy6Ek7pT
 9X3e0LmaFqVbufFp4xFiLkMutsCLLTnGyXIbzs7RkTm3XBVIUqiDWtI6I6X44ohG
 6PJn8vUlufu7owXrqFpgSBar2U1vfoQdhInmz4hbQeff0qn2nX/BGNwhxYptZ549
 TudsI9WGzJ6fvYQ56zh6+BfiA0FmjhUiSKOtrXImrhxE6gUf3IOJyMQlkxLx5t8D
 uuhBmO0J6kDi2lqF6alOEo+UDefJj4mUJn2tnIdis90+lNQlSV02GEtiwFT1zt1z
 LFW0xshQkxZ4lMa28h35FB1/Z11ApUOe4Es+OKADDJhAnxdZzXcAwIRyPRRPgdsy
 jTnJno+Kxk9wXLcekxVE
 =5BdE
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:

   - OpenFirmware/DeviceTree support for the Power Supply core: the core
     now automatically populates supplied_from hierarchy from the device
     tree.  With these patches chargers and batteries can now lookup
     each other without the board files support shim.  Rhyland Klein at
     NVIDIA did the work

   - New ST-Ericsson ABX500 hwmon driver.  The driver is heavily using
     the AB85xx core and depends on some recent changes to it, so that
     is why the driver comes through the battery tree.  It has an
     appropriate ack from the hwmon maintainer (i.e.  Guenter Roeck).
     Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
     the driver

   - Final bits to sync AB85xx ST-Ericsson changes into mainline.  The
     changes touch mfd parts, but these were acked by the appropriate
     MFD maintainer (ie Samuel Ortiz).  Lee Jones at Linaro did most of
     the work and lead the submission process.

  Minor changes, but still worth mentioning:

   - Battery temperature reporting fix for Nokia N900 phones
   - Versatile Express poweroff driver moved into drivers/power/reset/
   - Tree-wide: use devm_kzalloc() where appropriate
   - Tree-wide: dev_pm_ops cleanups/fixes"

* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
  pm2301-charger: Fix suspend/resume
  charger-manager: Use kmemdup instead of kzalloc + memcpy
  power_supply: Populate supplied_from hierarchy from the device tree
  power_supply: Add core support for supplied_from
  power_supply: Define Binding for power-supplies
  rx51_battery: Fix reporting temperature
  hwmon: Add ST-Ericsson ABX500 hwmon driver
  ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
  ab8500_{bmdata,fg}: Add const attributes to some data arrays
  ab8500_bmdata: Eliminate CamelCase warning of some variables
  ab8500_btemp: Make ab8500_btemp_get* interfaces public
  goldfish_battery: Use resource_size()
  lp8788-charger: Use PAGE_SIZE for the sysfs read operation
  max8925_power: Use devm_kzalloc()
  da9030_battery: Use devm_kzalloc()
  da9052-battery: Use devm_kzalloc()
  ds2760_battery: Use devm_kzalloc()
  ds2780_battery: Use devm_kzalloc()
  gpio-charger: Use devm_kzalloc()
  isp1704_charger: Use devm_kzalloc()
  ...
2013-04-30 15:15:24 -07:00
Guenter Roeck 29dd3b64b9 hwmon: (tmp401) Add support for TMP432
TMP432 is similar to TMP431 with a second external temperature sensor.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-21 08:56:48 -07:00
Hongbo Zhang 0bbb06ed56 hwmon: Add ST-Ericsson ABX500 hwmon driver
Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:27:52 -07:00
Masanari Iida 1754e4c5c7 documentation: hwmon: Fix typo in documentation/hwmon
Correct spelling typo in Documentation/hwmon

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-12 18:24:09 -07:00
Guenter Roeck 2c7fd30da2 hwmon: (nct6775) Expand scope of supported chips
NCT6775, NCT6776, and NCT6779 have a number of variants with the same
chip ID but different chip labels. Add text "or compatible" to the
message displayed when the driver is loaded and rephrase the Kconfig
entry to reflect that it also supports compatible chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck e1eb49063b hwmon: Add driver for LM95234
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck a1fac92b8b hwmon: (tmp401) Add support for TMP431
TMP431 is compatible to TMP401.

Also add support for additional I2C addresses supported by TMP411B
and TMP411C.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-04-07 21:16:42 -07:00
Guenter Roeck 58615a94f6 hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck a7c69118bd hwmon: (pmbus/lm25066) Report VAUX as vmon
So far the driver reported the voltage on VAUX as "vout2". This was not
entirely appropriate as it is not an output voltage, and complicates
the code. Use the new virtual "VMON" register set and report the voltage
as "vmon" instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck fd9175d2f6 hwmon: (pmbus/ltc2978) Add support for LTC2974 and LTC3883
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck 8c770f3a47 hwmon: (pmbus/ltc2978) Clean up documentation
Some sysfs attributes are only supported on LTC2978 and not on LTC3880.
Update documentation to reflect which attributes are supported for which chips.

Output current attributes supported on LTC3880 were described as providing
input current values. Fix text to reflect that the attributes provide output
current values.

"reset history" attribute descriptions were misleading and seemed to imply
that all history was reset when writing a single attribute. Replace with more
accurate text.

Replace 'internal temperature" with "chip temperature". Temperature limits
not only apply to the chip temperature, but also to external temperatures
on LTC3880, so remove the word "chip" from the attribute description.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:41 -07:00
Guenter Roeck bbd8decd41 hwmon: (nct6775) Add support for weighted fan control
The NCT677X series support weighted fan control. In this mode, a secondary
temperature source is used in addition to the primary temperature source to
control fan speed. Add support for this feature.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck cdcaeceb74 hwmon: (nct6775) Add support for automatic fan control
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 77eb5b3703 hwmon: (nct6775) Add support for pwm, pwm_mode, and pwm_enable
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 1c65dc365e hwmon: (nct6775) Add support for fan speed attributes
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:39 -07:00
Guenter Roeck 9de2e2e84e hwmon: Driver for Nuvoton NCT6775F, NCT6776F, and NCT6779D
This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Lars-Peter Clausen 51c2a4871c hwmon: (adt7410) Add support for the adt7310/adt7320
The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Jean Delvare 25eba81b7f hwmon: (lm75) Fix tcn75 prefix
The TCN75 has its own prefix for a long time now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2013-03-18 21:19:49 +01:00
Jean Delvare ab302bb0b8 hwmon: (adt7410) Document ADT7420 support
The adt7410 driver supports the ADT7420, but its documentation file
makes no mention of that. Add this refrence, and a brief a description
of the differences between the ADT7410 and the ADT7420.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-03 21:45:48 -08:00
Guenter Roeck 6d21a41656 hwmon: (pmbus/ltc2978) Update datasheet links
Links to datasheets are no longer valid. Provide links to product information
instead (which provides links to the datasheets and is hopefully more
persistent).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck e3333e572f hwmon: Update my e-mail address in driver documentation
Most of the hwmon driver documentation still listed my old invalid e-mail
address. Fix it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03 21:45:47 -08:00
Guenter Roeck d476828037 hwmon: (jc42) Add support for MCP98244
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:58:07 -08:00
Guenter Roeck 50115ac9b6 hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer.
MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:06 -08:00
Guenter Roeck 1640eaecc4 hwmon: (pmbus/zl6100) Add support for VMON/VDRV
Some of the ZL6100 compatible chips support monitoring a separate voltage pin,
VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon.

The chips support implicit warning limits for VMON/VDRV, as percentage of the
respective critical voltage. Support by reading/writing the critical voltages
and calculating the associated warning voltages.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:58:05 -08:00
Guenter Roeck ceeadc5c51 hwmon: Driver for Texas Instruments INA209
Add support for the TI / Burr-Brown INA209 voltage / current / power
monitor.

Cc: Paul Hays <haysp@magma.net>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:59 -08:00
Chris Verges 2bf9233a10 hwmon: (lm73) Add support for max/min alarms
Add support for temp1_min_alarm and temp1_max_alarm

Signed-off-by: Chris Verges <kg4ysn@gmail.com>
[linux@roeck-us.net: cleanup; dropped platform data and interrupt support]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:58 -08:00
Chris Verges 8c14d126ae hwmon: (lm73) Add 'update_interval' attribute
The LM73 supports four A/D conversion resolutions.  The default used by
the existing lm73 driver is the chip's default, 11-bit (0.25 C/LSB).
This patch enables changing of this resolution from userspace via the
update_interval sysfs attribute.  Full details on usage are included in
Documentation/hwmon/lm73.

Signed-off-by: Chris Verges <kg4ysn@gmail.com>
[linux@roeck-us.net: cleanup]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:57 -08:00
Guenter Roeck b06367070d hwmon: (it87) Add support for IT8771E and IT8772E
Assume that IT8771E and IT8772E are fully compatible with IT8728F.

IT8771E support contributed by Kelly Anderson.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00
Guenter Roeck 5372d2d71c hwmon: Driver for Maxim MAX6697 and compatibles
Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693,
MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00