In case of an unknown broadcast message is sent mstb will remain unset,
so check for this.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-3-imre.deak@intel.com
Handle any error due to partial reads, timeouts etc. to avoid parsing
uninitialized data subsequently. Also bail out if the parsing itself
fails.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-2-imre.deak@intel.com
Pick up
1ed134e652 drm/vc4: Fix VBLANK handling in crtc->enable() path
From drm-misc-next-fixes, it was applied after the last pull request
was sent from that branch. We'll send it through drm-fixes instead.
When we are enabling a CRTC, drm_crtc_vblank_get() is called before
drm_crtc_vblank_on(), which is not supposed to happen (hence the
WARN_ON() in the code). To solve the problem, we delay the 'update
display list' operation after the CRTC is actually enabled.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1498163126-26678-1-git-send-email-boris.brezillon@free-electrons.com
Fixes: 34c8ea400f ("drm/vc4: Mimic drm_atomic_helper_commit() behavior")
[ 236.821534] WARNING: kmemcheck: Caught 64-bit read from uninitialized memory (ffff8802538683d0)
[ 236.828642] 420000001e7f0000000000000000000000080000000000000000000000000000
[ 236.839543] i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
[ 236.850420] ^
[ 236.854123] RIP: 0010:[<ffffffff81396f07>] [<ffffffff81396f07>] fence_signal+0x17/0xd0
[ 236.861313] RSP: 0018:ffff88024acd7ba0 EFLAGS: 00010282
[ 236.865027] RAX: ffffffff812f6a90 RBX: ffff8802527ca800 RCX: ffff880252cb30e0
[ 236.868801] RDX: ffff88024ac5d918 RSI: ffff880252f780e0 RDI: ffff880253868380
[ 236.872579] RBP: ffff88024acd7bc0 R08: ffff88024acd7be0 R09: 0000000000000000
[ 236.876407] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880253868380
[ 236.880185] R13: ffff8802538684d0 R14: ffff880253868380 R15: ffff88024cd48e00
[ 236.883983] FS: 00007f1646d1a740(0000) GS:ffff88025d000000(0000) knlGS:0000000000000000
[ 236.890959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 236.894702] CR2: ffff880251360318 CR3: 000000024ad21000 CR4: 00000000001406f0
[ 236.898481] [<ffffffff8130d1ad>] i915_gem_request_retire+0x1cd/0x230
[ 236.902439] [<ffffffff8130e2b3>] i915_gem_request_alloc+0xa3/0x2f0
[ 236.906435] [<ffffffff812fb1bd>] i915_gem_do_execbuffer.isra.41+0xb6d/0x18b0
[ 236.910434] [<ffffffff812fc265>] i915_gem_execbuffer2+0x95/0x1e0
[ 236.914390] [<ffffffff812ad625>] drm_ioctl+0x1e5/0x460
[ 236.918275] [<ffffffff8110d4cf>] do_vfs_ioctl+0x8f/0x5c0
[ 236.922168] [<ffffffff8110da3c>] SyS_ioctl+0x3c/0x70
[ 236.926090] [<ffffffff814b7a5f>] entry_SYSCALL_64_fastpath+0x17/0x93
[ 236.930045] [<ffffffffffffffff>] 0xffffffffffffffff
We only set the timestamp before we mark the fence as signaled. It is
done before to avoid observers having a window in which they may see the
fence as complete but no timestamp. Having it does incur a potential for
the timestamp to be written twice, and even for it to be corrupted if
the u64 write is not atomic. Instead use a new bit to record the
presence of the timestamp, and teach the readers to wait until it is set
if the fence is complete. There still remains a race where the timestamp
for the signaled fence may be shown before the fence is reported as
signaled, but that's a pre-existing error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reported-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214124001.1930-1-chris@chris-wilson.co.uk
The right variable to check here is port, not dp.
This issue was detected using Coccinelle and the following semantic patch:
@@
expression x;
identifier fld;
@@
* x = devm_kzalloc(...);
... when != x == NULL
x->fld
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170706215833.GA25411@embeddedgus
All atomic state should be cleared when drm_modeset_backoff() is
called, because it drops all locks and the state becomes invalid.
The call to drm_atomic_state_clear was missing in atomic_remove_fb,
so add the missing call there.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629115954.26029-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: db8f6403e8 ("drm: Convert drm_framebuffer_remove to atomic, v4.")
Cc: stable@vger.kernel.org # v4.12-rc1+
Commit 3fcdcb2709 ("drm/vblank: Switch to bool in_vblank_irq in
get_vblank_timestamp") inverted a condition by mistake that resulted in
vblank timestamps always being 0 on hardware without a vblank counter.
Fix it.
Fixes: 3fcdcb2709 ("drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629123720.27173-1-laurent.pinchart+renesas@ideasonboard.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZUGOmAAoJEHm+PkMAQRiGhX8H/3fIhingPD01MBf98U0xGrJo
yIXmhu6nFs7TM0lDVDcHsKgqLQIT69ll7PrSZrMkc1RGUIPINoCuJVuJqDre0kfB
of5TX2KegqSx8h1vOWjGBCBjdYfPGyMdf9icf6KsGc/SlIdhN6WA99kglAjJA0Ve
qPTNagF0ntUNg1lsXffxyfcHqFpyqw/Z/C4ie/byFsn9iJ1VG9mNlTWSud09vhuM
3tvHzTUVAIWWuRrrgrvgqQpnwL+q5BfSDsXScMjBau0EK3RGGqG8EN6Kbkfa7VQ6
aBoeboQjUijSJnVwvySdQ11MChTIOwZdfrNPra/1HD3WJNsSu4BIRt5JcAKcOhc=
=qmSg
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc7' into drm-next
Linux 4.12-rc7
Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
The "supported input formats" table in dw_hdmi.h was incorrectly formatted,
using "+" signs where "|" needs to be. That, in turn, causes the PDF build
to fail.
Fixes: def23aa7e9 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
Pull x86 fix from Thomas Gleixner:
"A single fix to unbreak the vdso32 build for 64bit kernels caused by
excess #includes in the mshyperv header"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mshyperv: Remove excess #includes from mshyperv.h
Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:
- Plug a subtle race due to a missing READ_ONCE() in the timekeeping
code where reloading of a pointer results in an inconsistent
callback argument being supplied to the clocksource->read function.
- Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
time keeping core code, to prevent a possible discontuity.
- Apply a similar fix to the arm64 vdso clock_gettime()
implementation
- Add missing includes to clocksource drivers, which relied on
indirect includes which fails in certain configs.
- Use the proper iomem pointer for read/iounmap in a probe function"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
time: Fix clock->read(clock) race around clocksource changes
clocksource: Explicitly include linux/clocksource.h when needed
clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- Return the proper error code if aux buffers for a event are not
supported.
- Calculate the probe offset for inlined functions correctly
- Update the Skylake DTLB load/store miss event so it can count 1G
TLB entries as well"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf probe: Fix probe definition for inlined functions
perf/x86/intel: Add 1G DTLB load/store miss support for SKL
perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)
Pull irq fix from Thomas Gleixner:
"A single fix for the MIPS GIC to prevent ftrace recursion"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Mark count and compare accessors notrace
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 to ignore timeout bit on Lifebook AH544
- a fixup to Synaptics RMI function 54 that was breaking some Dells
- a fix for memory leak in soc_button_array driver
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - only read the F54 query registers which are used
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
Input: soc_button_array - fix leaking the ACPI button descriptor buffer
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc7 that have been queued
up for the last 2 weeks. This includes:
- Fix a TMR related kref underflow detected by the recent refcount_t
conversion in upstream.
- Fix a iscsi-target corner case during explicit connection logout
timeout failure.
- Address last fallout in iscsi-target immediate data handling from
v4.4 target-core now allowing control CDB payload underflow"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
target: Fix kref->refcount underflow in transport_cmd_finish_abort
- fix warnings of host programs
- fix "make tags" when COMPILE_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZTumLAAoJED2LAQed4NsGUHYP/12pK+wpjj3hPS6dlgC3n6CR
ZzIgBPVVMH+W5wjcKU4JIrhFT3aXHNnV9QTjCakK5Ufubfm7YBpCY+cVWaFzUl4A
CTKGs0NguV200E6bLUnLAWrjC6mSZ17tPuxomx4AClmVkc3y7rT8Hl5L9UMLJ98n
qxWMs3pOvkXKId67zWLuIAu0UTT94s20gkjTRAUxSfV+zahLyWsdwvmIubp2Wa1N
1GrXyA+bHQ+iY4kMuN+sWvIOSn8B7E3ZZGEg9IFd8hVv/ispIYU3Pcm0nNEudxGE
V54/r7noIPgsI9sHYx5mhkxag/AGlXu99IVqMbhLyvM02OndvZFen+GyWMUp+ZTk
j3hQUKtGyUkTqpjQFN3LfONVS5p1Gxlrvj9L4CGjZHNIsxwDDNWHBbkkyQTi3+iR
CPfiV47oPfUoOFg6Yk8GKnHD3tMI3TUtcqHvTCYpMfQz2IU3oMFW6s8h+i7+800W
lmfHHTXmKp+w6Q5+WAcI9LHLdXp2oG68HmNptb/YasDDBYX8q1FGBPJqvDX1snq3
bJS+9KlGarYmWaWa+Y5I0yWzK0kA3E3VP8LO0LgjihzFL45GbTcx2PQ3FumC+/sB
3IPMMCT8EjEkuR1sNAqXY0FpItsGvS1tKPriO753N2cb+uDPQxe2gmHAR4yGD3+E
CWX6t9Cg5KurUHSgGbDc
=yDPZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:
- fix warnings of host programs
- fix "make tags" when COMPILED_SOURCE=1 is specified along with O=
- clarify help message of C=1 option
- fix dependency for ncurses compatibility check
- fix "make headers_install" for fakechroot environment"
* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix sparse warnings in nconfig
kbuild: fix header installation under fakechroot environment
kconfig: Check for libncurses before menuconfig
Kbuild: tiny correction on `make help`
tags: honor COMPILED_SOURCE with apart output directory
genksyms: add printf format attribute to error_with_pos()
Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
from posix timers that has existed since posix timers have been in the
kernel.
This patch is slightly simpler than my earlier version of this patch
as I discovered in testing that I had misspelled "#ifdef
CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
setting of resched_timer uncondtional.
I have tested this and verified that without this patch there is a
nasty hang that is easy to trigger, and with this patch everything
works properly"
Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
I missed.
Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Only reschedule timers on signals timers have sent
A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.
The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.
Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.
Remove the includes and unbreak the build.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes: dee863b571 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- three fixes for kprobes/ftrace/livepatch interactions.
- properly handle data breakpoints when using the Radix MMU.
- fix for perf sampling of registers during call_usermodehelper().
- properly initialise the thread_info on our emergency stacks
- add an explicit flush when doing TLB invalidations for a process
using NPU2.
Thanks to:
Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi Bangoria,
Masami Hiramatsu.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2Ax
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.12. Most of these actually came in last
week but got held up for some more testing.
- three fixes for kprobes/ftrace/livepatch interactions.
- properly handle data breakpoints when using the Radix MMU.
- fix for perf sampling of registers during call_usermodehelper().
- properly initialise the thread_info on our emergency stacks
- add an explicit flush when doing TLB invalidations for a process
using NPU2.
Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
Bangoria, Masami Hiramatsu"
* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Initialise thread_info for emergency stacks
powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
powerpc/perf: Fix oops when kthread execs user process
powerpc/64s: Handle data breakpoints in Radix mode
powerpc/kprobes: Skip livepatch_handler() for jprobes
powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
powerpc/kprobes: Pause function_graph tracing during jprobes handling
- I2C and SPI devices are expected to be enumerated by the
I2C and SPI subsystems, respectively, but due to a change made
during the 4.11 cycle, in some cases the ACPI core marks them
as already enumerated which causes the I2C and SPI subsystems
to overlook them, so fix that (Jarkko Nikula).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZTRdgAAoJEILEb/54YlRx+IgP/17SwIqNGDJMl6t/R+dRtLTv
JWGzp967HLo0UchZUQpIvYT6CTPWytSV4hHxoCFSKSYLmQ8XI/qpu1fNysjsf0lK
PZp6H/qsTRyh9MRbadEhJKYLvb7SVgSLRsht8ts5kiqc1TfgdfT8b/VJF0ggQ4+O
z/QM3yMlnEIkAds23SdRbiy+Y0W45XTvPYHq9H03HIL809DvuQ5MdPTC9Cyr/PI9
KyhGs8zx3ZOuWmuRVmGJvWqw40WMa2ZhUGXbQGYTaVHzcIIeiv345WQn6luWsYPL
ln52ifM+T7wbNsmvCH4MtkW8Ix5yDJNkDM3x2gwkF07egJpYYOa7q/02sPmHz+2Z
daQbh6mKb861a75UiEcZmF1DL4sCpcwGAvKv9ERvrWBsYX6y14K84SLas2j0lKO/
9SzDhKKLVV46u/rmM0qz+9n6tEDoo1Hi7460FToucLEJpjc4aqsE8kUSjshlO+QX
mqdlrHKlWfAq52Ccno7Sn2FhGJG+p9CoQk+BE9rExIoBMlLrtw+fe/oPiHVvTzs8
TP7U5ioHyfdL9sRLfkKXHF21zAwpxvh7EVPED5LK3GwNZ0QjVryN5HAlnwGrDnUe
zL32+hLEpRW5hPmsZOHjSzhZ4o7ihZwpcCTy62uG4zZVf+qLpIM0Xd0dFC1CpZTm
F5/BD8Gj5Dl5n4SO7VM4
=ORkn
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes the ACPI-based enumeration of some I2C and SPI devices
broken in 4.11.
Specifics:
- I2C and SPI devices are expected to be enumerated by the I2C and
SPI subsystems, respectively, but due to a change made during the
4.11 cycle, in some cases the ACPI core marks them as already
enumerated which causes the I2C and SPI subsystems to overlook
them, so fix that (Jarkko Nikula)"
* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / scan: Fix enumeration for special SPI and I2C devices
Pull i2c fix from Wolfram Sang.
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Use correct function to write to register
MVEBU PWM controller embedded in the GPIO controller before
we release v4.12. Hopefully.
-----BEGIN PGP SIGNATURE-----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=+/4l
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
controller embedded in the GPIO controller before we release v4.12.
Hopefully"
* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: change compatible string for PWM support
-----BEGIN PGP SIGNATURE-----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=MKIT
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A varied bunch of fixes, one for an API regression with connectors.
Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
ones being the most important"
* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
drm: Fix GETCONNECTOR regression
drm/radeon: add a quirk for Toshiba Satellite L20-183
drm/radeon: add a PX quirk for another K53TK variant
drm/amdgpu: adjust default display clock
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
drm/amdgpu: add Polaris12 DID
drm/i915: Don't enable backlight at setup time.
drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
drm/i915: Fix deadlock witha the pipe A quirk during resume
drm/i915: Remove __GFP_NORETRY from our buffer allocator
drm/i915: Encourage our shrinker more when our shmemfs allocations fails
drm/i915: Differentiate between sw write location into ring and last hw read
random_for_linus_stable pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllIfggACgkQ8vlZVpUN
gaMzCAgAgsCFSH9vGm+DgUjABNH++fPB/MVsd8lq8sGzg+rTGCe1pBap409feDkF
+xZfF41Dqts8rchXYn6hqTDuOMfCX9cOxDxxOdhdKG6ntmdGHSZ4T+hM17v6Jgbe
a7M1xs/7Xrfunqsz9bkb1AdReO1wxG7f3a6JixPnQ1K6yc6HZpFZK5mTrd73lSfY
ta+KVrZBvPyVyAcWNQn6ssgTRhrTFwFy/nG4Mz2XteATyo9Z9622z8TGW5tZacnQ
dMgMi9ZMqYuIW/1tA1MmIs5GFkmbZVOqgpbipjhrXEquNCGwj4LQCeeN4qrKnXsw
enAy3z6DRu9C/F7gMHcvpbYETEmSjQ==
=HSEU
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random fixes from Ted Ts'o:
"Fix some locking and gcc optimization issues from the most recent
random_for_linus_stable pull request"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: silence compiler warnings and fix race
to crash
- a DM io reference count fix that resolves a NULL pointer seen when
issuing discards to a DM mirror target's device whose mirror legs do
not all support discards
- a couple DM integrity fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZTBU6AAoJEMUj8QotnQNaDJEH/3ujmjAnN1gpB4PhMh7kGyKA
i8qB476EYTEH8mPha88lvGoGoTk07cgwuWgQtulbcIlM0PbtbjcRs4lxEPCJW8sm
BeBnwKnBtnd+I+INKK0RCkYNHxO1ciCv4jMe08xNvSOrcmNVI1E4HjQ5GtJX7IMO
eQCEdTsDhf+ZXGnE6ErzfLVYnrazhNhk40+2jSlDFxDL8Qpd43EwMw5iHzeh0ztm
Frf9+JjWlckUS6oVm1AkTygbRrS3FEJ/cM3ei61/kj6hYzFGcP4Ba95Zd/E5k1Ls
9byBw93KTW3Pi5BKeVTo/JgxITcVQUZAWn95qF7HofZn6oBLdEiHzXLHQctl9Qs=
=fZVe
-----END PGP SIGNATURE-----
Merge tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a revert of a DM mirror commit that has proven to make the code prone
to crash
- a DM io reference count fix that resolves a NULL pointer seen when
issuing discards to a DM mirror target's device whose mirror legs do
not all support discards
- a couple DM integrity fixes
* tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm io: fix duplicate bio completion due to missing ref count
dm integrity: fix to not disable/enable interrupts from interrupt context
Revert "dm mirror: use all available legs on multiple failures"
dm integrity: reject mappings too large for device
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
fs/exec.c: account for argv/envp pointers
ocfs2: fix deadlock caused by recursive locking in xattr
slub: make sysfs file removal asynchronous
lib/cmdline.c: fix get_options() overflow while parsing ranges
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
mm, thp: remove cond_resched from __collapse_huge_page_copy
When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included. This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.
For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).
The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely. Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).
[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea393 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Another deadlock path caused by recursive locking is reported. This
kind of issue was introduced since commit 743b5f1434 ("ocfs2: take
inode lock in ocfs2_iop_set/get_acl()"). Two deadlock paths have been
fixed by commit b891fa5024 ("ocfs2: fix deadlock issue when taking
inode lock at vfs entry points"). Yes, we intend to fix this kind of
case in incremental way, because it's hard to find out all possible
paths at once.
This one can be reproduced like this. On node1, cp a large file from
home directory to ocfs2 mountpoint. While on node2, run
setfacl/getfacl. Both nodes will hang up there. The backtraces:
On node1:
__ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
ocfs2_write_begin+0x43/0x1a0 [ocfs2]
generic_perform_write+0xa9/0x180
__generic_file_write_iter+0x1aa/0x1d0
ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2]
__vfs_write+0xc3/0x130
vfs_write+0xb1/0x1a0
SyS_write+0x46/0xa0
On node2:
__ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
ocfs2_xattr_set+0x12e/0xe80 [ocfs2]
ocfs2_set_acl+0x22d/0x260 [ocfs2]
ocfs2_iop_set_acl+0x65/0xb0 [ocfs2]
set_posix_acl+0x75/0xb0
posix_acl_xattr_set+0x49/0xa0
__vfs_setxattr+0x69/0x80
__vfs_setxattr_noperm+0x72/0x1a0
vfs_setxattr+0xa7/0xb0
setxattr+0x12d/0x190
path_setxattr+0x9f/0xb0
SyS_setxattr+0x14/0x20
Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is
exported by commit 439a36b8ef ("ocfs2/dlmglue: prepare tracking logic
to avoid recursive cluster lock").
Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com
Fixes: 743b5f1434 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Eric Ren <zren@suse.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bf5eb3de38 ("slub: separate out sysfs_slab_release() from
sysfs_slab_remove()") made slub sysfs file removals synchronous to
kmem_cache shutdown.
Unfortunately, this created a possible ABBA deadlock between slab_mutex
and sysfs draining mechanism triggering the following lockdep warning.
======================================================
[ INFO: possible circular locking dependency detected ]
4.10.0-test+ #48 Not tainted
-------------------------------------------------------
rmmod/1211 is trying to acquire lock:
(s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40
but task is already holding lock:
(slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (slab_mutex){+.+.+.}:
lock_acquire+0xf6/0x1f0
__mutex_lock+0x75/0x950
mutex_lock_nested+0x1b/0x20
slab_attr_store+0x75/0xd0
sysfs_kf_write+0x45/0x60
kernfs_fop_write+0x13c/0x1c0
__vfs_write+0x28/0x120
vfs_write+0xc8/0x1e0
SyS_write+0x49/0xa0
entry_SYSCALL_64_fastpath+0x1f/0xc2
-> #0 (s_active#120){++++.+}:
__lock_acquire+0x10ed/0x1260
lock_acquire+0xf6/0x1f0
__kernfs_remove+0x254/0x320
kernfs_remove+0x23/0x40
sysfs_remove_dir+0x51/0x80
kobject_del+0x18/0x50
__kmem_cache_shutdown+0x3e6/0x460
kmem_cache_destroy+0x1fb/0x2d0
kvm_exit+0x2d/0x80 [kvm]
vmx_exit+0x19/0xa1b [kvm_intel]
SyS_delete_module+0x198/0x1f0
entry_SYSCALL_64_fastpath+0x1f/0xc2
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(slab_mutex);
lock(s_active#120);
lock(slab_mutex);
lock(s_active#120);
*** DEADLOCK ***
2 locks held by rmmod/1211:
#0: (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80
#1: (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0
stack backtrace:
CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
Call Trace:
print_circular_bug+0x1be/0x210
__lock_acquire+0x10ed/0x1260
lock_acquire+0xf6/0x1f0
__kernfs_remove+0x254/0x320
kernfs_remove+0x23/0x40
sysfs_remove_dir+0x51/0x80
kobject_del+0x18/0x50
__kmem_cache_shutdown+0x3e6/0x460
kmem_cache_destroy+0x1fb/0x2d0
kvm_exit+0x2d/0x80 [kvm]
vmx_exit+0x19/0xa1b [kvm_intel]
SyS_delete_module+0x198/0x1f0
? SyS_delete_module+0x5/0x1f0
entry_SYSCALL_64_fastpath+0x1f/0xc2
It'd be the cleanest to deal with the issue by removing sysfs files
without holding slab_mutex before the rest of shutdown; however, given
the current code structure, it is pretty difficult to do so.
This patch punts sysfs file removal to a work item. Before commit
bf5eb3de38, the removal was punted to a RCU delayed work item which is
executed after release. Now, we're punting to a different work item on
shutdown which still maintains the goal removing the sysfs files earlier
when destroying kmem_caches.
Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org
Fixes: bf5eb3de38 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using get_options() it's possible to specify a range of numbers,
like 1-100500. The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.
Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing. Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks. Update index properly.
Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes: 9973c98ecf ("dax: add support for fsync/sync")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return
ERR_PTR(status)
with that status to follow_automount(), which will then dereference an
invalid pointer.
So treat a positive status the same as zero, and map to ENOENT.
See comment in systemd src/core/automount.c::automount_send_ready().
Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Existing code that uses vmalloc_to_page() may assume that any address
for which is_vmalloc_addr() returns true may be passed into
vmalloc_to_page() to retrieve the associated struct page.
This is not un unreasonable assumption to make, but on architectures
that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need
to ensure that vmalloc_to_page() does not go off into the weeds trying
to dereference huge PUDs or PMDs as table entries.
Given that vmalloc() and vmap() themselves never create huge mappings or
deal with compound pages at all, there is no correct answer in this
case, so return NULL instead, and issue a warning.
When reading /proc/kcore on arm64, you will hit an oops as soon as you
hit the huge mappings used for the various segments that make up the
mapping of vmlinux. With this patch applied, you will no longer hit the
oops, but the kcore contents willl be incorrect (these regions will be
zeroed out)
We are fixing this for kcore specifically, so it avoids vread() for
those regions. At least one other problematic user exists, i.e.,
/dev/kmem, but that is currently broken on arm64 for other reasons.
Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a partial revert of commit 338a16ba15 ("mm, thp: copying user
pages must schedule on collapse") which added a cond_resched() to
__collapse_huge_page_copy().
On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in
atomic context and thus scheduling is not possible. This is only a
possible config on arm and i386.
Although need_resched has been shown to be set for over 100 jiffies
while doing the iteration in __collapse_huge_page_copy, this is better
than doing
if (in_atomic())
cond_resched()
to cover only non-CONFIG_HIGHPTE configs.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.
The driver already prints a warning message, there's no need to panic
users by printing something that looks like an oops as well.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ysyU
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.
The driver already prints a warning message, there's no need to panic
users by printing something that looks like an oops as well"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Remove WARN_ON from clear task context.
scsi: qedi: Remove WARN_ON for untracked cleanup.
- don't allow swapon on files on the realtime device, because the swap
code will swap pages out to blocks on the data device, thereby
corrupting the filesystem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qkCp
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I have one more bugfix for you for 4.12-rc7 to fix a disk corruption
problem:
- don't allow swapon on files on the realtime device, because the
swap code will swap pages out to blocks on the data device, thereby
corrupting the filesystem"
* tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't allow bmap on rt files
- Do not double the offset of inline expansions when using
'perf probe' on inlined functions (Björn Töpel)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=oZCf
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.12-20170622' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull 'perf probe' fix from Arnaldo Carvalho de Melo:
- Do not double the offset of inline expansions when using
'perf probe' on inlined functions (Björn Töpel)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.
Previous issues with the I2C controller or touchpad were addressed in:
commit 5b65c2a029 ("HID: rmi: check sanity of the incoming report")
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
hdlcd fixes.
* tag 'hdlcd-for-v4.13-v3' of git://linux-arm.org/linux-ld:
drm/arm: hdlcd: remove unused variables
drm/arm: hdlcd: Use CMA helper for plane buffer address calculation
drm/arm: hdlcd: Set the CRTC's port before binding the encoder.
Emergency stacks have their thread_info mostly uninitialised, which in
particular means garbage preempt_count values.
Emergency stack code runs with interrupts disabled entirely, and is
used very rarely, so this has been unnoticed so far. It was found by a
proposed new powerpc watchdog that takes a soft-NMI directly from the
masked_interrupt handler and using the emergency stack. That crashed
at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be
garbage.
To fix this, zero the entire THREAD_SIZE allocation, and initialize
the thread_info.
Cc: stable@vger.kernel.org
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move it all into setup_64.c, use a function not a macro. Fix
crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In commit 613f050d68 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.
Prior this patch:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626
After:
$ perf probe -m nf_nat -D in_range
p:probe/in_range nf_nat:in_range.isra.9+0
$ perf probe -m i40e -D i40e_clean_rx_irq
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
$ perf probe -m i40e -D i40e_clean_rx_irq:16
p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665
Committer testing:
Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:
# pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
__ew32
e1000_regdump
e1000e_dump_ps_pages
e1000_desc_unused
e1000e_systim_to_hwtstamp
e1000e_rx_hwtstamp
e1000e_update_rdt_wa
e1000e_update_tdt_wa
e1000_put_txbuf
e1000_consume_page
Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:
$ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
<SNIP>
<1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
<13e27c> DW_AT_name : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
<13e287> DW_AT_low_pc : 0x17a30
<3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e6f0> DW_AT_abstract_origin: <0x13ed2c>
<13e6f4> DW_AT_low_pc : 0x17be6
<SNIP>
<1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
<13ed2e> DW_AT_name : (indirect string, offset: 0xa54c3): e1000_consume_page
So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:
0x17be6 - 0x17a30 = 438
but above we have 876, which is twice as much.
Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13e86f> DW_AT_abstract_origin: <0x13ed2c>
<13e873> DW_AT_low_pc : 0x17d21
0x17d21 - 0x17a30 = 753
So we where adding it at twice the offset from the containing function as we
should.
And then after this patch:
# perf probe -m e1000e -D e1000e_rx_hwtstamp
p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37
# perf probe -m e1000e -D e1000_consume_page
p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
#
Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:
readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
673: 0000000000017a30 1626 FUNC LOCAL DEFAULT 2 e1000_clean_jumbo_rx_irq
674: 0000000000018090 2013 FUNC LOCAL DEFAULT 2 e1000_clean_rx_irq_ps
This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():
<3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
<13ec78> DW_AT_abstract_origin: <0x13ed2c>
<13ec7c> DW_AT_low_pc : 0x17f79
0x17f79 - 0x17a30 = 1353
So:
0x17a30 + 2 * 1353 = 0x184c2
And:
0x184c2 - 0x18090 = 1074
Which explains the bogus third expansion for e1000_consume_page() to end up at:
p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074
All fixed now :-)
[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 613f050d68 ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull cifs fixes from Steve French:
"Various small fixes for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix some return values in case of error in 'crypt_message'
cifs: remove redundant return in cifs_creation_time_get
CIFS: Improve readdir verbosity
CIFS: check if pages is null rather than bv for a failed allocation
CIFS: Set ->should_dirty in cifs_user_readv()
MIPS:
- Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.
PPC:
- Fix host crashes/hangs on POWER9.
- Properly restore userspace state after KVM_RUN ioctl.
s390:
- Fix address translation in odd-ball cases (real-space designation
ASCEs).
x86:
- Fix privilege escalation in 64-bit Windows guests.
All patches are for stable and the x86 also has a CVE.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZS9uIAAoJEED/6hsPKofou7UH/1AopK/4WzfZqIlObxf1O2K/
iqeoHlU/7TPz3+YVN4PxCyb9KWxOR1CS6IjmrrQRnl/ncYkFwUI11zb1Dao7mvYo
L/D4XeT9rLheNATj9RPlznIAbQicN3TFWWczMzR0T2kftHHDAe0rWF1hkyS3BDyY
n6V6LbG6h6ONacUHUFfDAgRugiI1rKAjKtOeFvylIS5nIe1ez1ocULBxoXVJFxv1
0XnX/OrWDocGeope0xt6Jmjr7N5cMU0fyjJ+VM4ap8HGmovVUPeXF+cKdaOUyZyS
L+4goghsHDK8fCrtQiPhL+TqQ7El0OtzzcSScb662vT1wd7haAtrQcv96WFAVE4=
=Zhvq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"MIPS:
- Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.
PPC:
- Fix host crashes/hangs on POWER9.
- Properly restore userspace state after KVM_RUN ioctl.
s390:
- Fix address translation in odd-ball cases (real-space designation
ASCEs).
x86:
- Fix privilege escalation in 64-bit Windows guests
All patches are for stable and the x86 also has a CVE"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix singlestepping over syscall
KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows
KVM: MIPS: Fix maybe-uninitialized build failure
KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1
KVM: PPC: Book3S HV: Save/restore host values of debug registers
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Context-switch EBB registers properly
KVM: PPC: Book3S HV: Cope with host using large decrementer mode
- Use address passed in, rather than hard coded value
- Correct clock-names value in DT binding documentation
-----BEGIN PGP SIGNATURE-----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=iygS
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- arizona: use address passed in, rather than hard coded value
- correct STM32 clock-names value in DT binding documentation
* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Update STM32 timers clock names
mfd: arizona: Fix typo using hard-coded register
Imre Deak