Commit Graph

704 Commits

Author SHA1 Message Date
Lijun Pan fd7e5b7a87 powerpc/mpc85xx: Remove P1023 RDS support
P1023RDS is no longer supported/manufactured by Freescale while P1023RDB is.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-05-22 18:08:31 -05:00
Martijn de Gouw 2b09c60389 powerpc/85xx: Add OCA4080 board support
OCA4080 overview:
- 1.466 GHz Freescale QorIQ P4080E Processor
- 4Gbyte DDR3 on board
- 8Mbyte Nor flash
- Serial RapidIO 1.2
- 1 x 10/100/1000 BASE-T front ethernet
- 1 x 1000 BASE-BX ethernet on AMC connector

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive.nl>
[scottwood@freescale.com: minor conflict-related changes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-05-22 18:08:20 -05:00
Valentin Longchamp 497c8b6096 powerpc/mpc85xx: add support for Keymile's kmcoge4 board
This patch introduces the support for Keymile's kmcoge4 board which is
the internal reference design for boards based on Freescale's
P2040/P2041 SoCs. This internal reference design is named kmp204x.

The peripherals used on this board are:
- SPI NOR Flash as bootloader medium
- NAND Flash with a ubi partition
- 2 PCIe busses (hosts 1 and 3)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 4 Local Bus windows, with one dedicated to the QRIO reset/power mgmt
  CPLD
- 2 I2C busses
- last but not least, the mandatory serial port

The patch also adds a defconfig file for this reference design that is
necessary because of the lowmem option that must be set higher due to
the number of PCIe devices with big ioremapped mem ranges on the boad.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-05-22 18:08:18 -05:00
Alistair Popple 2a2c74b2ef IBM Akebono: Add the Akebono platform
This patch adds support for the IBM Akebono board.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-01 08:26:26 +10:00
Linus Torvalds 5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Gautham R. Shenoy 81f359027a cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
Enable CPUFreq for PowerNV. Select "performance", "powersave",
"userspace" and "ondemand" governors. Choose "ondemand" to be the
default governor.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07 14:35:28 +02:00
Al Viro 4597e695b8 get rid of DEBUG_WRITECOUNT
it only makes control flow in __fput() and friends more convoluted.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:12 -04:00
Benjamin Herrenschmidt cd42748535 Merge remote-tracking branch 'scott/next' into next
Freescale updates from Scott. Mostly support for critical
and machine check exceptions on 64-bit BookE, some new
PCI suspend/resume work and misc bits.
2014-03-24 10:26:10 +11:00
Anton Blanchard e45fbae515 powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
Our netfilter options are stale and important things like masquerading
are no longer enabled. Instead of trying to keep up with any updates,
set CONFIG_NETFILTER_ADVANCED=n on ppc64* and pseries* defconfigs.
This enables the most common netfilter modules for us.

While here, enable the network bridge module which is heavily used in
KVM setups.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:35 +11:00
Aneesh Kumar K.V 1907a2c2c3 powerpc/defconfigs: Enable THP in pseries defconfig
We also set it to be enabled always. This helps in wider testing

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-24 09:48:35 +11:00
Prabhakar Kushwaha 2eb1b9a41b powerpc/config: Remove unnecssary CONFIG_FSL_IFC
CONFIG_FSL_IFC gets enabled by Kconfig dependancies.
So remove unnecssary define from the defconfigs

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19 17:38:13 -05:00
Paul Gortmaker 3c8464a9b1 powerpc: Delete old PrPMC 280/2800 support
This processor/memory module was mostly used on ATCA blades and
before that, on cPCI blades.  It wasn't really user friendly, with
custom non u-boot bootloaders (powerboot/motload) and no real way
to recover corrupted boot flash (which was a common problem).

As such, it had its day back before the big ppc --> powerpc move
to device trees, and that was largely through commercial BSPs that
started to dry up around 2007.

Systems using one were largely in a "deploy and sustain" mode,
so interest in upgrading to new kernels in the field was nil.
Also, requiring 50A, 48V power supplies and a 2'x2'x2' ATCA
chassis largely rules out any hobbyist/enthusiast interest.

The point of all this, is that we might as well delete the in
kernel files relating to this platform.  No point in continuing
to build it via walking the defconfigs or via linux-next testing.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 15:54:48 +11:00
송은봉 847443774b powerpc: : Kill CONFIG_MTD_PARTITIONS
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc.
 Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b.

Signed-off-by: Eunbong Song <eunb.song@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-07 15:50:11 +11:00
Benjamin Herrenschmidt fac515db45 Merge remote-tracking branch 'scott/next' into next
Freescale updates from Scott:

<<
Highlights include 32-bit booke relocatable support, e6500 hardware
tablewalk support, various e500 SPE fixes, some new/revived boards, and
e6500 deeper idle and altivec powerdown modes.
>>
2014-01-15 14:22:35 +11:00
Olof Johansson 5906b0a701 powerpc: add SATA_MV to ppc64_defconfig
This makes ppc64_defconfig bootable without initrd on pasemi systems,
most of whom have MV SATA controllers. Some have SIL24, but that driver
is already enabled.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15 13:58:48 +11:00
Stephen Chivers be2019816e powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100
Add support for the Motorola/Emerson MVME5100 Single Board Computer.

The MVME5100 is a 6U form factor VME64 computer with:

	- A single MPC7410 or MPC750 CPU
	- A HAWK Processor Host Bridge (CPU to PCI) and
	  MultiProcessor Interrupt Controller (MPIC)
	- Up to 500Mb of onboard memory
	- A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip
	- Two 16550 compatible UARTS
	- Two Intel E100 Fast Ethernets
	- Two PCI Mezzanine Card (PMC) Slots
	- PPCBug Firmware

The HAWK PHB/MPIC is compatible with the MPC10x devices.

There is no onboard disk support. This is usually provided by installing a PMC
in first PMC slot.

This patch revives the board support, it was present in early 2.6
series kernels. The board support in those days was by Matt Porter of
MontaVista Software.

CSC Australia has around 31 of these boards in service. The kernel in use
for the boards is based on 2.6.31. The boards are operated without disks
from a file server.

This patch is based on linux-3.13-rc2 and has been boot tested.

Only boards with 512 Mb of memory are known to work.

Signed-off-by: Stephen Chivers <schivers@csc.com>
Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-09 17:52:20 -06:00
LEROY Christophe 189046981b powerpc 8xx: defconfig: slice by 4 is more efficient than the default slice by 8 on Powerpc 8xx.
On PPC_8xx, CRC32_SLICEBY4 is more efficient (almost twice) than CRC32_SLICEBY8,
as shown below:

With CRC32_SLICEBY8:
[    1.109204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    1.114401] crc32: self tests passed, processed 225944 bytes in 15118910 nsec
[    1.130655] crc32c: CRC_LE_BITS = 64
[    1.134235] crc32c: self tests passed, processed 225944 bytes in 4479879 nsec

With CRC32_SLICEBY4:
[    1.097129] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    1.101878] crc32: self tests passed, processed 225944 bytes in 8616242 nsec
[    1.116298] crc32c: CRC_LE_BITS = 32
[    1.119607] crc32c: self tests passed, processed 225944 bytes in 3289576 nsec

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07 19:11:20 -06:00
Lijun Pan 3d73eb69fb powerpc/85xx: Merge 85xx/p1023_defconfig into mpc85xx_smp and mpc85xx
mpc85xx_smp_defconfig and mpc85xx_defconfig already have CONFIG_P1023RDS=y.
Merge CONFIG_P1023RDB=y and other relevant configurations into
mpc85xx_smp_defconfig and mpc85_defconfig.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07 19:06:04 -06:00
Anatolij Gustschin 84953f969b powerpc/52xx: Re-enable bestcomm driver in defconfigs
The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-10 11:25:08 +11:00
Olof Johansson fbae00e63d powerpc/pasemi: Turn on devtmpfs in defconfig
At least some distros expect it these days; turn it on. Also, random
churn from doing a savedefconfig for the first time in a year or so.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-10 11:25:08 +11:00
Anton Blanchard f53e462e90 powerpc: Add pseries_le_defconfig
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:23 +11:00
Anton Blanchard 65508689d4 powerpc: Enable virtio on ppc64 and pseries configs
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:02:09 +11:00
Anton Blanchard b7697592ef powerpc: Enable multipath modules on ppc64 and pseries
Enable a few modules required to boot on a POWER multipath
box.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:02:03 +11:00
Anton Blanchard 4d16bd39c0 powerpc: sync ppc64, ppc64e and pseries configs
Run savedefconfig over the ppc64, ppc64e and pseries config

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30 16:01:56 +11:00
Christian Kujau b60c5a7a82 powerpc/6xx: CONFIG_MCU_MPC8349EMITX cannot be a module
During "make ppc6xx_defconfig" the following happens:

  HOSTCC  scripts/basic/fixdep
  GEN     /usr/local/src/tmp/lnx/Makefile
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX

Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning
go away. This too has been reported by Geert Uytterhoeven a long time ago:
https://lkml.org/lkml/2011/11/13/11  - I only came across this because I
needed a "clean" defconfig for this Powerbook G5.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
[scottwood@freescale.com: cleaned up commit message slightly]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28 21:11:24 -05:00
Kevin Hao 9e0967572e powerpc/85xx: use one kernel option for all the CoreNet_Generic boards
Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28 21:11:21 -05:00
Shengzhou Liu 788d399d3c powerpc/fsl/defconfig: enable CONFIG_AT803X_PHY
Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28 21:11:17 -05:00
Mingkai Hu 622e03eb34 powerpc/85xx: Add C293PCIE board support
C293PCIE board is a series of Freescale PCIe add-in cards to perform
as public key crypto accelerator or secure key management module.

 - 512KB platform SRAM in addition to 512K L2 Cache/SRAM
 - 512MB soldered DDR3 32bit memory
 - CPLD System Logic
 - 64MB x16 NOR flash and 4GB x8 NAND flash
 - 16MB SPI flash

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Po Liu <Po.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23 19:43:24 -05:00
Chunhe Lan 75898156bc powerpc/85xx: Add P1023RDB board support
P1023RDB Specification:
-----------------------
Memory subsystem:
   512MB DDR3 (Fixed DDR on board)
   64MB NOR flash
   128MB NAND flash

Ethernet:
   eTSEC1: Connected to Atheros AR8035 GETH PHY
   eTSEC2: Connected to Atheros AR8035 GETH PHY

PCIe:
   Three mini-PCIe slots

USB:
   Two USB2.0 Type A ports

I2C:
   AT24C08 8K Board EEPROM (8 bit address)

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23 19:14:21 -05:00
Kevin Hao d01dd2b8ac powerpc/mpc85xx: Only emulate the unimplemented FP instructions on corenet64
We have split the math emulation into two parts. This makes it
possible to just emulate the unimplemented floating point instructions
on these boards.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:59:31 +10:00
Kevin Hao 195c4940f7 powerpc/85xx: Enable the math emulation for the corenet64_smp_defconfig
I got the following error on my t4240qds board.
  ntpd[2713]: unhandled signal 4 at 0fd5b448 nip 0fd5b448 lr 0fd5b424 code 30001

The root cause is that the float point instruction 'fsqrt' is used.
But this instruction is not implemented on e6500 core. Even this
does seem a gcc bug, I would like to enable the math emulation
in the kernel to workaround this kind of issue.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14 14:59:00 +10:00
Benjamin Herrenschmidt a12e4537ad Merge remote-tracking branch 'scott/next' into next
Merge some Freescale updates from Scott Wood
2013-08-09 16:01:40 +10:00
Zhenhua Luo dcbe39fed7 powerpc/fsl: Enable CONFIG_DEVTMPFS_MOUNT so /dev can be mounted correctly
When using recent udev, the /dev node mount requires CONFIG_DEVTMPFS_MOUNT
is enabled in Kernel. The patch enables the option in defconfig of Freescale
QorIQ targets.

Changed defconfig list:
   arch/powerpc/configs/85xx/p1023rds_defconfig
   arch/powerpc/configs/corenet32_smp_defconfig
   arch/powerpc/configs/corenet64_smp_defconfig
   arch/powerpc/configs/mpc85xx_smp_defconfig
   arch/powerpc/configs/mpc85xx_defconfig
   arch/powerpc/configs/mpc83xx_defconfig

Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
[scottwood@freescale.com: added mpc83xx and non-smp mpc85xx]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07 18:38:11 -05:00
Bjorn Helgaas 7cd29f4b22 PCI: hotplug: Convert to be builtin only, not modular
Convert CONFIG_HOTPLUG_PCI from tristate to bool.  This only affects
the hotplug core; several of the hotplug drivers can still be modules.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-07-25 14:11:06 -06:00
Benjamin Herrenschmidt 7a9cdd95fe Merge remote-tracking branch 'agust/next' into next
From Anatolij:

"There are small cleanups and fixes for mpc512x common code,
mpc512x_defconfig updates and soft reboot support for mpc5125
based boards."
2013-07-02 18:31:08 +10:00
Benjamin Herrenschmidt dd8164c1dd Merge remote-tracking branch 'scott/next' into next
Merge Freescale updates
2013-07-02 17:42:17 +10:00
Chunhe Lan 2dd1c132d5 powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
On the most boards of Freescale platform, they use the PCI-Express
Intel(R) PRO/1000 gigabit ethernet card to work. So enable the
corresponding driver for it.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-07-01 18:38:32 -05:00
Aruna Balakrishnaiah 99b308e3bb powerpc/pseries: Enable PSTORE in pseries_defconfig
Since now we have pstore support for nvram in pseries, enable it
in the default config. With this config option enabled, pstore
infra-structure will be used to read/write the messages from/to nvram.

Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-25 17:24:40 +10:00
Anatolij Gustschin dd0120dea6 powerpc/mpc512x: enable USB support in defconfig
Enable USB EHCI, mass storage and USB gadget support.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-06-25 08:51:19 +02:00
Gerhard Sittig 6d18c9042c powerpc/mpc512x: commit re-generated defconfig
This patch does not change the content, it merely re-orders
configuration items and drops explicit options which already
apply as the default.

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-06-25 08:37:17 +02:00
Alistair Popple b9ef7d6b11 powerpc: Update default configurations
Update default configurations for systems with CONFIG_BOOTX_TEXT
selected so that they continue to print early debug messages as is
currently the case.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:12 +10:00
Alan Stern 98f541c6e3 USB: remove remaining instances of USB_SUSPEND
Commit 84ebc10294 (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel.  This patch (as1677) removes the
remaining instances of that symbol.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15 13:44:44 -04:00
Benjamin Herrenschmidt bc23100a0d Merge remote-tracking branch 'kumar/next' into next
From Kumar Gala:
<<
Add support for T4 and B4 SoC families from Freescale, e6500 altivec
support, some various board fixes and other minor cleanups.
>>
2013-04-30 11:10:09 +10:00
Benjamin Herrenschmidt 28bf41a1fe Merge remote-tracking branch 'agust/next' into next
From Anatolij Gustschin:
<<
There are some changes for mpc5121 generic platform code
to support mpc5125 SoC and DTS files for ac14xx and
MPC5125-TWR boards.
>>
2013-04-30 11:08:45 +10:00
Geoff Levand 36d69d5c0f powerpc/ps3: Update ps3_defconfig
Refresh and set CONFIG_RD_LZMA=y.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-04-18 13:03:50 +10:00
Roy ZANG c897848d8d powerpc/85xx: enable Silicon image 3132 PCIe to SATA controller
Some 85xx board, for example, P1020RDB-PC has on board silicon image
PCIe to SATA controller and when booting up, the filesystem will auto mount
to the SATA disk. So enable silicon image 3132 pcie to sata controller
by default

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11 08:26:34 -05:00
Shaveta Leekha a2edcdce5e powerpc/85xx: Update corenet64_smp_defconfig for B4_QDS
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10 10:15:31 -05:00
Matteo Facchinetti b9e7196ecd powerpc/512x: move mpc5121_generic platform to mpc512x_generic.
This provides a base for using 512x_generic platform on mpc5125 boards.

By this way 512x_GENERIC it could be used for all generic mpc512x boards
and kernel could be compiled with mpc512x_defconfig.

Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it>
[agust: applied s/mpc5121/mpc512x in mpc512x_generic.c]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-01 09:25:00 +02:00
Prabhakar Kushwaha 5274bf9b98 powerpc: add CONFIG(s) require for using flash controller
Add CONFIG(s) required for NAND and NOR flash controller usage.
It defines MTD, Jffs2 and UBIFS file system required for controllers.

It also enables IFC controller

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-18 14:00:11 -05:00
Roy Zang 714b720eff powerpc/85xx: enable E1000 NIC to mpc85xx_defconfig
E1000 NIC is a common used Ethernet card. Enable it as default
for mpc85xx platform.

other change is due to make savedefconfig

Reported-by: Fu Jiwei <b36666@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-15 10:59:25 -05:00
Scott Wood 19c29f1747 powerpc/85xx: add CONFIG_E1000E to corenet64_smp_defconfig
This is a commonly used ethernet card, especially with mainline kernels
which lack datapath support.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 16:00:25 -05:00
Kumar Gala 40d6b79dd8 powerpc/85xx: Update corenet64_smp_defconfig for T4240
* Add support for up to 24 cores on T4240 (includes threads)
* Enable AltiVec support (on T4240)
* Add T4240QDS board into build
* Other changes are due to general kernel update of defconfig

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:35 -05:00
Linus Torvalds 9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00
Benjamin Herrenschmidt 877d66856e Merge remote-tracking branch 'kumar/next' into next
<<
Mostly misc code cleanups in various board ports and adding support for a
new MPC85xx board - ppa8548.
>>
2013-02-19 11:51:39 -06:00
Stef van Os e0e8398e3a powerpc/85xx: Board support for ppa8548
Initial board support for the Prodrive PPA8548 AMC module. Board
is an MPC8548 AMC platform used in RapidIO systems. This module is
also used to test/work on mainline linux RapidIO software.

PPA8548 overview:
- 1.3 GHz Freescale PowerQUICC III MPC8548 processor
- 1 GB DDR2 @ 266 MHz
- 8 MB NOR flash
- Serial RapidIO 1.2
- 1 x 10/100/1000 BASE-T front ethernet
- 1 x 1000 BASE-BX ethernet on AMC connector

Signed-off-by: Stef van Os <stef.van.os@prodrive.nl>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-15 13:54:10 -06:00
Michael Neuling 81afe7d101 powerpc: Add transactional memory to pseries and ppc64 defconfigs
Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-15 17:02:25 +11:00
Geoff Levand 69fde0210e powerpc/ps3: Refresh ps3_defconfig
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-15 16:54:45 +11:00
Holger Brunck ed59b3eca0 powerpc/83xx: update kmeter1_defconfig
Synchronize this defconfig with latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13 07:49:08 -06:00
Paul Gortmaker d5bc813f40 powerpc/85xx: enable MTD options in sbc8548 defconfig
This board has soldered on flash, and a SODIMM flash module.
Both can be used for booting, via switching JP12 and SW2.8
and using the sbc8548-altflash.dts when booting from SODIMM.

Here we enable MTD in kernel so that we can see the bootloader
(and other flash sectors) from linux.

Normal configuration:

 root@sbc8548:~# cat /proc/mtd
 dev:    size   erasesize  name
 mtd0: 007a0000 00020000 "space"
 mtd1: 00060000 00020000 "bootloader"
 mtd2: 03f00000 00080000 "space"
 mtd3: 00100000 00080000 "bootloader"
 root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 4a 61 6e 20 31 39  |10-dirty (Jan 19|
 00000020  20 32 30 31 33 20 2d 20  31 39 3a 34 30 3a 31 31  | 2013 - 19:40:11|
 00000030
 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 44 65 63 20 31 33  |10-dirty (Dec 13|
 00000020  20 32 30 31 32 20 2d 20  31 35 3a 30 30 3a 30 37  | 2012 - 15:00:07|
 00000030
 root@sbc8548:~#

Alternate configuration, with sbc8548-altflash.dts:

 root@sbc8548:~# cat /proc/mtd
 dev:    size   erasesize  name
 mtd0: 03f00000 00080000 "space"
 mtd1: 00100000 00080000 "bootloader"
 mtd2: 007a0000 00020000 "space"
 mtd3: 00060000 00020000 "bootloader"
 root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 44 65 63 20 31 33  |10-dirty (Dec 13|
 00000020  20 32 30 31 32 20 2d 20  31 35 3a 30 30 3a 30 37  | 2012 - 15:00:07|
 00000030
 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C
 1+0 records in
 1+0 records out
 00000000  27 05 19 56 55 2d 42 6f  6f 74 20 32 30 31 32 2e  |'..VU-Boot 2012.|
 00000010  31 30 2d 64 69 72 74 79  20 28 4a 61 6e 20 31 39  |10-dirty (Jan 19|
 00000020  20 32 30 31 33 20 2d 20  31 39 3a 34 30 3a 31 31  | 2013 - 19:40:11|
 00000030
 root@sbc8548:~#

Note that in the latter, the larger SODIMM device appears 1st,
as mtd0 and mtd1, as indicated in the sizes, and in the date
of the u-boot image.

The kernel configuration is the same in both cases; only the dtb
needs to be changed in accordance with the JP12/SW2.8 settings.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13 07:49:00 -06:00
Scott Wood 34f364fef4 powerpc/fsl: Remove CONFIG_IRQ_ALL_CPUS from mpc85xx/mpc86xx defconfig
While this should be harmless now that distribute_irqs
obeys MPIC_SINGLE_DEST_CPU, there's no reason to enable this
on mpc85xx/mpc86xx since MPIC_SINGLE_DEST_CPU will always be set.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-29 11:35:05 +11:00
Frederic Weisbecker abf917cd91 cputime: Generic on-demand virtual cputime accounting
If we want to stop the tick further idle, we need to be
able to account the cputime without using the tick.

Virtual based cputime accounting solves that problem by
hooking into kernel/user boundaries.

However implementing CONFIG_VIRT_CPU_ACCOUNTING require
low level hooks and involves more overhead. But we already
have a generic context tracking subsystem that is required
for RCU needs by archs which plan to shut down the tick
outside idle.

This patch implements a generic virtual based cputime
accounting that relies on these generic kernel/user hooks.

There are some upsides of doing this:

- This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING
if context tracking is already built (already necessary for RCU in full
tickless mode).

- We can rely on the generic context tracking subsystem to dynamically
(de)activate the hooks, so that we can switch anytime between virtual
and tick based accounting. This way we don't have the overhead
of the virtual accounting when the tick is running periodically.

And one downside:

- There is probably more overhead than a native virtual based cputime
accounting. But this relies on hooks that are already set anyway.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27 19:23:27 +01:00
Anton Blanchard 0b9fd94a1c powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig
We need devtmpfs enabled to boot on recent versions of Fedora. EFI
partitions will be useful for large block devices. tmpfs ACL support
is used by some distros for managing access to devices.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:25 +11:00
Anton Blanchard f648ef2c1f powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfig
Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17
and RHEL6) as well as the x86 defconfigs. Userspace these days is
most likely to expect utf8 anyway.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:22 +11:00
Anton Blanchard e6fde82224 powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig
No changes, just update the configs with savedefconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:01:19 +11:00
Olof Johansson e95e09ce67 powerpc/pasemi: Enable PRINTK_TIME in defconfig
Enable PRINTK_TIME in pasemi_defconfig. Also regenerate it, it seems
that a lot of options have moved around since last time savedefconfig
was ran on it.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:00:22 +11:00
Nishanth Aravamudan be812195d8 powerpc/pseries: Double NR_CPUS in defconfig
Anticipating growth in coming years, we should ensure we are getting a
good lead on testing.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:59:17 +11:00
David Woodhouse ffe3150125 UAPI Disintegration 2012-10-09
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUHPmWhOxKuMESys7AQLCZRAAsZAuAK0MxZ4iuq/+fmy7Uxb1jrzLOYSb
 3UgbTgXAjR0WAUHNegVZLX1Xc+12KxvMCj/8sO62Ai+wtgHeDAuUl2T0FbSZjlGK
 qqx/qQqTFHUfJRbm3Lu9iarZ2K49v1kTDk4C+nC8J9mEEW4WFlVPD10n90j+4hxr
 ZCEYril7qOQQV65oor3BT2V64+X1WDHriTLugH1o8RziRF9jh6Z2hgZAWnThcGxu
 lPsmXF2e7jDqGcM3gWtxZWu/yTBPxw549R+JUg4aVKho9WI5ClyjNAKnE7wtd3iW
 HyrylRH+ch2oeYFa5+xoyopRARUUPmujKaHU+ZI1o++eNzuw5JYiwuMlZBLyUc9I
 foWMSUw31U7695exyf66HiH7GEKI1PVpgJVNu41eJvl0iWSWCpKCB6Gs8Sw4xnp2
 auUCYSniXHNTFhFktjNdIUAn0+1X/b/SEfb/id4GvLp1K98QGOfe8dMCC8hEnXiF
 4iIViM8Sv1GB1us5huSjbMeRPbZ3x/loqEpApfgcaqcyrUR29FTE/lFQ4fj9xviL
 JjckPLMMZb4Ho5wrkCi5NtXJ16mx1qKzbBGDdqzmqaNdN+08rNF//kA9m9hCwgD8
 XfAV286DKDC0SllZIG+Uz7YLnSZjNAUhjvWN3ipV+SdT5DGybL3uSW5tYiSAzI2E
 3cayGTWINMg=
 =U9Qq
 -----END PGP SIGNATURE-----

Merge tag 'disintegrate-mtd-20121009' of git://git.infradead.org/users/dhowells/linux-headers

UAPI Disintegration 2012-10-09

Conflicts:
	MAINTAINERS
	arch/arm/configs/bcmring_defconfig
	arch/arm/mach-imx/clk-imx51-imx53.c
	drivers/mtd/nand/Kconfig
	drivers/mtd/nand/bcm_umi_nand.c
	drivers/mtd/nand/nand_bcm_umi.h
	drivers/mtd/nand/orion_nand.c
2012-10-09 15:04:25 +01:00
Linus Torvalds 5f3d2f2e1a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...
2012-10-06 03:16:12 +09:00
Linus Torvalds d66e6737d4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Optimised AES/SHA1 for ARM.
 - IPsec ESN support in talitos and caam.
 - x86_64/avx implementation of cast5/cast6.
 - Add/use multi-algorithm registration helpers where possible.
 - Added IBM Power7+ in-Nest support.
 - Misc fixes.

Fix up trivial conflicts in crypto/Kconfig due to the sparc64 crypto
config options being added next to the new ARM ones.

[ Side note: cut-and-paste duplicate help texts make those conflicts
  harder to read than necessary, thanks to git being smart about
  minimizing conflicts and maximizing the common parts... ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: x86/glue_helper - fix storing of new IV in CBC encryption
  crypto: cast5/avx - fix storing of new IV in CBC encryption
  crypto: tcrypt - add missing tests for camellia and ghash
  crypto: testmgr - make test_aead also test 'dst != src' code paths
  crypto: testmgr - make test_skcipher also test 'dst != src' code paths
  crypto: testmgr - add test vectors for CTR mode IV increasement
  crypto: testmgr - add test vectors for partial ctr(cast5) and ctr(cast6)
  crypto: testmgr - allow non-multi page and multi page skcipher tests from same test template
  crypto: caam - increase TRNG clocks per sample
  crypto, tcrypt: remove local_bh_disable/enable() around local_irq_disable/enable()
  crypto: tegra-aes - fix error return code
  crypto: crypto4xx - fix error return code
  crypto: hifn_795x - fix error return code
  crypto: ux500 - fix error return code
  crypto: caam - fix error IDs for SEC v5.x RNG4
  hwrng: mxc-rnga - Access data via structure
  hwrng: mxc-rnga - Adapt clocks to new i.mx clock framework
  crypto: caam - add IPsec ESN support
  crypto: 842 - remove .cra_list initialization
  Revert "[CRYPTO] cast6: inline bloat--"
  ...
2012-10-04 09:06:34 -07:00
Huang Shijie b8c4bf2610 defconfigs: remove CONFIG_MTD_NAND_VERIFY_WRITE
CONFIG_MTD_NAND_VERIFY_WRITE was killed recently, so remove it from
defconfigs as well.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29 15:00:49 +01:00
Chunhe Lan 1919aac36c powerpc/85xx: Enable USB support in p1023rds_defconfig
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-19 08:38:16 -05:00
Benjamin Herrenschmidt caa1d631fc Merge remote-tracking branch 'kumar/next' into next 2012-09-18 16:04:33 +10:00
Michael Neuling b92a66a65c powerpc: Add denormalisation exception handling for POWER6/7
On POWER6 and POWER7 if the input operand to an instruction is a
denormalised single precision binary floating point value we can take
a denormalisation exception where it's expected that the hypervisor
(HV=1) will fix up the inputs before the instruction is run.

This adds code to handle this denormalisation exception for POWER6 and
POWER7.

It also add a CONFIG_PPC_DENORMALISATION option and sets it in
pseries/ppc64_defconfig.

This is useful on bare metal systems only.  Based on patch from Milton
Miller.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-17 16:31:47 +10:00
David S. Miller b48b63a1f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/netfilter/nfnetlink_log.c
	net/netfilter/xt_LOG.c

Rather easy conflict resolution, the 'net' tree had bug fixes to make
sure we checked if a socket is a time-wait one or not and elide the
logging code if so.

Whereas on the 'net-next' side we are calculating the UID and GID from
the creds using different interfaces due to the user namespace changes
from Eric Biederman.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-15 11:43:53 -04:00
Timur Tabi 34f84b5b5b powerpc/85xx: introduce support for the Freescale / iVeia P1022RDK
The Freescale / iVeia P1022RDK reference board is a small-factor board
with a Freescale P1022 SOC.  It includes:

1) 512 MB 64-bit DDR3-800 (max) memory
2) 8MB SPI serial flash memory for boot loader
3) Bootable 4-bit SD/MMC port
4) Two 10/100/1000 Ethernet connectors
5) One SATA port
6) Two USB ports
7) One PCIe x4 slot
8) DVI video connector
9) Audio input and output jacks, powered by a Wolfson WM8960 codec.

Unlike the P1022DS, the P1022RDK does not have any localbus devices,
presumably because of the localbus / DIU multiplexing restriction of
the P1022 SOC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:07 -05:00
Timur Tabi 4c30c143f0 powerpc/85xx: Add support for P5040DS board
Add support for the Freescale P5040DS Reference Board ("Superhydra"), which
is similar to the P5020DS.  Features of the P5040 are listed below, but
not all of these features (e.g. DPAA networking) are currently supported.

Four P5040 single-threaded e5500 cores built
    Up to 2.4 GHz with 64-bit ISA support
    Three levels of instruction: user, supervisor, hypervisor
CoreNet platform cache (CPC)
    2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
 support Up to 1600MT/s
    Memory pre-fetch engine
DPAA incorporating acceleration for the following functions
    Packet parsing, classification, and distribution (FMAN)
    Queue management for scheduling, packet sequencing and
	congestion management (QMAN)
    Hardware buffer management for buffer allocation and
	de-allocation (BMAN)
    Cryptography acceleration (SEC 5.0) at up to 40 Gbps SerDes
    20 lanes at up to 5 Gbps
    Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
    Two 10 Gbps Ethernet MACs
    Ten 1 Gbps Ethernet MACs
High-speed peripheral interfaces
    Two PCI Express 2.0/3.0 controllers
Additional peripheral interfaces
    Two serial ATA (SATA 2.0) controllers
    Two high-speed USB 2.0 controllers with integrated PHY
    Enhanced secure digital host controller (SD/MMC/eMMC)
    Enhanced serial peripheral interface (eSPI)
    Two I2C controllers
    Four UARTs
    Integrated flash controller supporting NAND and NOR flash
DMA
    Dual four channel
Support for hardware virtualization and partitioning enforcement
    Extra privileged level for hypervisor support
QorIQ Trust Architecture 1.1
    Secure boot, secure debug, tamper detection, volatile key storage

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:07 -05:00
Cong Wang 965505015b netfilter: remove xt_NOTRACK
It was scheduled to be removed for a long time.

Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netfilter@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-09-03 13:36:40 +02:00
Benjamin Herrenschmidt 2c39bf49fd Revert "powerpc: Update g5_defconfig"
This reverts commit b1acf1bb54.

Something went horribly wrong when I did savedefconfig, not sure what,
but what's in there is busted so let's revert it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-08-24 20:55:55 +10:00
Kim Phillips 1267643dc3 powerpc/fsl: fix "Failed to mount /dev: No such device" errors
Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot,
at least over nfs, with:

Failed to mount /dev: No such device

Configuring DEVTMPFS fixes it.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23 10:46:20 -05:00
Kim Phillips 823f74733d powerpc/fsl: update defconfigs
run make savedefconfig on fsl defconfigs.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-23 10:46:15 -05:00
Zhao Chenhui 8e90e4cc33 powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-10 07:46:45 -05:00
Seth Jennings 322cacce0a powerpc/crypto: rework Kconfig
This patch creates a new submenu for the NX cryptographic
hardware accelerator and breaks the NX options into their own
Kconfig file under drivers/crypto/nx/Kconfig.

This will permit additional NX functionality to be easily
and more cleanly added in the future without touching
drivers/crypto/Makefile|Kconfig.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01 17:47:52 +08:00
Andrew Morton c255a45805 memcg: rename config variables
Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
Anton Blanchard fd297b3a73 powerpc: Enable pseries hardware RNG and crypto modules
Enable the hardware RNG and crypto modules. I verified they both
autoload via the VIO subsystem, so there is no need to build them in.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 11:42:32 +10:00
Benjamin Herrenschmidt b1acf1bb54 powerpc: Update g5_defconfig
This updates the g5 defconfig to include nouveau instead of nvidiafb
(which works much better nowadays, in fact the latter crashes on modern
distros), and to set CONFIG_VT_HW_CONSOLE_BINDING without which takeover
from the firmware offb by nouveau doesn't work properly (and leads to
unexplained black screens for some users).

The rest is churn of going through defconfig / savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-27 11:42:32 +10:00
Shengzhou Liu 478a4829d8 powerpc/85xx: Update corenet64_smp_defconfig
Enable USB, MMC, SATA, LBC, MTD, NAND, SPI, PCIe, EDAC, VFAT, NFS, etc.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11 07:45:50 -05:00
Shengzhou Liu 9d23298734 powerpc/85xx: Update corenet32_smp_defconfig
- Enable NAND support
 - Enable CONFIG_PCI_MSI and CONFIG_MMC_SDHCI_OF

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-11 07:45:43 -05:00
Timur Tabi ab2aba4743 Revert "powerpc/p3060qds: Add support for P3060QDS board"
This reverts commit 96cc017c5b.

The P3060 was cancelled before it went into production, so there's no point
in supporting it.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:22 -05:00
Paul Gortmaker b048b4e17c powerpc: remove Wind River SBC8560 support
This reference board dates back to 2004, and is largely a legacy
EOL product.  The MPC8560 is a pre e500v2 CPU.  The SBC8548 is
a more modern, better e500v2 target for people to use as a
reference board with today's kernels, should they require one.

Removing support for it will also allow us to remove some
sbc8560 specific quirk handling in 8250 UART code, and some
MTD mapping support.

Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:21 -05:00
Holger Brunck 5d1d67e361 powerpc/82xx: add SPI support for mgcoge
Add spi support for mgcoge into the platform code and the dts
file. Additionaly SPIDEV is switched on in the defconfig and the
updates for the newer kernel version are committed. The SPI
interface is used to drive the Maxim DS3106 clock chip.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:20 -05:00
Holger Brunck 7ee0bf5336 powerpc/83xx: update defconfig for kmeter1
Switch on UBIFS, HOTPLUG and TIPC and update the config to
the latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:20 -05:00
Shengzhou Liu 5a9e0d2e7a powerpc/85xx: Enable MTD/NOR/NAND options by default in defconfig
Enable MTD/NOR/NAND options by default in mpc85xx_defconfig and
mpc85xx_smp_defconfig to support NOR, NAND flash.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:19 -05:00
Kim Phillips a6fceddd7b powerpc/fsl: Distribute interrupts on all CPUs by default
At least for crypto/IPSec, doing so provides users with a better
performance experience out of the box.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:19 -05:00
Michael Ellerman db9112173b powerpc: Turn on BPF_JIT in ppc64_defconfig
Matt added BPF_JIT support in commit 0ca87f05, but currently none of our
defconfigs build it. Turn that sucker on.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-10 19:19:02 +10:00
Anton Blanchard 641bd53a61 powerpc: Enable jump label support
When looking through some instruction traces I noticed our tracepoint
checks were inline. It turns out we don't have CONFIG_JUMP_LABEL
enabled.

By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with
a nop at every tracepoint call. For example in do_IRQ:

CONFIG_JUMP_LABEL disabled:
        stdx 3,11,9
        lwz 0,8(29)
        cmpwi 7,0,0
        bne- 7,.L124
        bl .irq_enter

CONFIG_JUMP_LABEL enabled:
        stdx 3,11,9
        nop
        bl .irq_enter

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-03 14:14:40 +10:00
Linus Torvalds 2e341ca686 Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00
Linus Torvalds 6f73b3629f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "Here are the powerpc goodies for 3.5.  Main highlights are:

   - Support for the NX crypto engine in Power7+
   - A bunch of Anton goodness, including some micro optimization of our
     syscall entry on Power7
   - I converted a pile of our thermal control drivers to the new i2c
     APIs (essentially turning the old therm_pm72 into a proper set of
     windfarm drivers).  That's one more step toward removing the
     deprecated i2c APIs, there's still a few drivers to fix, but we are
     getting close
   - kexec/kdump support for 47x embedded cores

  The big missing thing here is no updates from Freescale.  Not sure
  what's up here, but with Kumar not working for them anymore things are
  a bit in a state of flux in that area."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc: Fix irq distribution
  Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
  powerpc: Fixing a cputhread code documentation
  powerpc/crypto: Enable the PFO-based encryption device
  powerpc/crypto: Build files for the nx device driver
  powerpc/crypto: debugfs routines and docs for the nx device driver
  powerpc/crypto: SHA512 hash routines for nx encryption
  powerpc/crypto: SHA256 hash routines for nx encryption
  powerpc/crypto: AES-XCBC mode routines for nx encryption
  powerpc/crypto: AES-GCM mode routines for nx encryption
  powerpc/crypto: AES-ECB mode routines for nx encryption
  powerpc/crypto: AES-CTR mode routines for nx encryption
  powerpc/crypto: AES-CCM mode routines for nx encryption
  powerpc/crypto: AES-CBC mode routines for nx encryption
  powerpc/crypto: nx driver code supporting nx encryption
  powerpc/pseries: Enable the PFO-based RNG accelerator
  powerpc/pseries/hwrng: PFO-based hwrng driver
  powerpc/pseries: Add PFO support to the VIO bus
  powerpc/pseries: Add pseries update notifier for OFDT prop changes
  powerpc/pseries: Add new hvcall constants to support PFO
  ...
2012-05-23 09:02:42 -07:00
Anton Blanchard 694caf0255 powerpc: Remove CONFIG_POWER4_ONLY
Remove CONFIG_POWER4_ONLY, the option is badly named and only does two
things:

- It wraps the MMU segment table code. With feature fixups there is
  little downside to compiling this in.

- It uses the newer mtocrf instruction in various assembly functions.
  Instead of making this a compile option just do it at runtime via
  a feature fixup.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-30 15:37:26 +10:00
Robert Richter 392d65a9ad perf: Remove PERF_COUNTERS config option
Renaming remaining PERF_COUNTERS options into PERF_EVENTS.

Think we can get rid of PERF_COUNTERS now.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333643084-26776-5-git-send-email-robert.richter@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-04-26 13:52:52 +02:00
Geoff Levand 3252c8a3d0 powerpc/ps3: Refresh ps3_defconfig
Signed-off-by: Geoff Levand <geoff@infradead.org>
2012-04-24 18:18:01 -07:00
Mark Brown 1eecb8280b Linux 3.4-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPgOpXAAoJEHm+PkMAQRiG8eUIAJ3Hjo0o5hqzxol8LWHDGF8s
 3h59qwRtts82u2psStZULPLbBzw6yjn8U5Mcrh7pffwCG2BzBL5rXcmXfvoPaET3
 TjylIj986Jv+jwZyuyZcLzYyoUtgjtq7hnt4tgVVEPlexYs7LxUl8vO8QjxT+bVO
 7eKgzLsXlBC9kw4P5M7kOBQ9NE5vmEcKf+fB3Hu3DqfVJtw9Lb7EeDQj/cbQsGqI
 vavSxe7lMTPsgMP2+hRz4txGTDJNRazkO2BdwfYrcNwTSa8tfBFlamww3y4+eJtq
 MFQfdNxQpumh2++T4IC2i/nLaawH7kWj2EdaRCRLMy9hVlb/v8/wcgd+1nfLkU8=
 =0on9
 -----END PGP SIGNATURE-----

Merge tag 'v3.4-rc2' into for-3.5

Linux 3.4-rc2 contains some bug fixes we need, including the addition of
an export for regcache_sync_region().
2012-04-09 11:53:45 +01:00
Benjamin Herrenschmidt e31c6dfa8e Merge remote-tracking branch 'kumar/next' into merge 2012-04-02 13:57:46 +10:00
Shawn Guo a23dc69482 ASoC: imx: merge sound/soc/imx into sound/soc/fsl
Freescale PowerPC and ARM/IMX families share the same SSI IP block.
The patch merges sound/soc/imx into sound/soc/fsl, so that the possible
code sharing and consolidation can happen.

This is a plain merge, except that menuconfig SND_POWERPC_SOC is added
in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for
IMX platform.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:28:26 +01:00
Grant Likely d4886bc670 irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG rename
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-29 14:31:20 -06:00
Shaveta Leekha 2a78aeb107 powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigs
Enable I2C char dev interface for user space testing of I2C controler.
Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it
was missing.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-29 08:14:13 -05:00
Benjamin Herrenschmidt 4286f84ef6 Merge remote-tracking branch 'kumar/next' into next 2012-03-21 10:56:04 +11:00
Heiko Schocher 70a3e5a029 powerpc/mpc5200: add options to mpc5200_defconfig
Add the following options to the mpc5200_defconfig, needed
for the a4m072 board support:

CONFIG_AMD_PHY=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM87=m
CONFIG_RTC_DRV_PCF8563=m

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-03-21 10:40:28 +11:00
Heiko Schocher dd83191625 powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
Add following options to mpc5200_defconfig:

- CONFIG_MTD_PLATRAM=y
  (selects CONFIG_MTD_RAM, so this is removed)
- CONFIG_FIXED_PHY=y
- CONFIG_SENSORS_LM80=y
- CONFIG_FB_FOREIGN_ENDIAN=y
- CONFIG_FB_SM501=m
- CONFIG_RTC_DRV_DS1374=y

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-03-18 23:59:42 +01:00
Timur Tabi 0c350a9a5c powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectable
Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS,
so that large physical address support is a selectable option for non-CoreNet
reference boards.

The option is enabled in mpc85xx_[smp_]defconfig so that the default is
unchanged.  However, now it can be deselected.

The P1022DS had this option defined because the default device tree for
this board uses 36-bit addresses.  This had the side-effect of forcing
this option on for all boards that use mpc85xx_[smp_]defconfig.  Some
users may want to disable this feature to create an optimized configuration
for boards with <= 2GB of RAM.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16 14:57:03 -05:00
Martyn Welch e041013ac0 powerpc/85xx: Board support for GE IMP3A
Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020
processor.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16 11:15:48 -05:00
Martyn Welch 6518bb69f4 gpio: Move GE GPIO driver to reside within GPIO subsystem
The GE GPIO driver provides basic support (set direction, read/write state)
for the GPIO provided on some GE single board computers. This patch moves
the driver from the 86xx specific platform directrory to the GPIO subsystem
so that it can be used on non-86xx boards.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16 11:08:08 -05:00
Stephen Rothwell 3d066d77cf powerpc: remove CONFIG_PPC_ISERIES from the architecture Kconfig files
After this, we can remove the legacy iSeries code more easily.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-27 11:33:58 +11:00
Stephen Rothwell a1a1d1bfc9 powerpc: Remove legacy iSeries from ppc64_defconfig
Since we are heading towards removing the Legacy iSeries platform, start
by no longer building it for ppc64_defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-16 16:15:08 +11:00
Linus Torvalds e4e88f31bc Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.
2012-01-06 17:58:22 -08:00
Timur Tabi 3900fad3d3 powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
Commit 7c4b2f09 (powerpc: Update mpc85xx/corenet 32-bit defconfigs)
accidentally disabled the ePAPR byte channel driver in the defconfig for
Freescale CoreNet platforms.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04 15:33:58 -06:00
Kumar Gala 389a6c527e powerpc/fsl: Update defconfigs to enable some standard FSL HW features
corenet64_smp_defconfig:
 - enabled rapidio

corenet32_smp_defconfig:
 - enabled hugetlbfs, rapidio

mpc85xx_smp_defconfig:
 - enabled P1010RDB, hugetlbfs, SPI, SDHC, Crypto/CAAM

mpc85xx_smp_defconfig:
 - enabled hugetlbfs, SPI, SDHC, Crypto/CAAM

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04 15:33:58 -06:00
Suzuki Poulose 0f890c8d20 powerpc: Rename mapping based RELOCATABLE to DYNAMIC_MEMSTART for BookE
The current implementation of CONFIG_RELOCATABLE in BookE is based
on mapping the page aligned kernel load address to KERNELBASE. This
approach however is not enough for platforms, where the TLB page size
is large (e.g, 256M on 44x). So we are renaming the RELOCATABLE used
currently in BookE to DYNAMIC_MEMSTART to reflect the actual method.

The CONFIG_RELOCATABLE for PPC32(BookE) based on processing of the
dynamic relocations will be introduced in the later in the patch series.

This change would allow the use of the old method of RELOCATABLE for
platforms which can afford to enforce the page alignment (platforms with
smaller TLB size).

Changes since v3:

* Introduced a new config, NONSTATIC_KERNEL, to denote a kernel which is
  either a RELOCATABLE or DYNAMIC_MEMSTART(Suggested by: Josh Boyer)

Suggested-by: Scott Wood <scottwood@freescale.com>
Tested-by: Scott Wood <scottwood@freescale.com>

Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux ppc dev <linuxppc-dev@lists.ozlabs.org>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-20 10:20:19 -05:00
Benjamin Herrenschmidt 1e7342e778 Merge remote-tracking branch 'jwb/next' into next
Conflicts:
	arch/powerpc/platforms/40x/ppc40x_simple.c
2011-12-16 11:24:25 +11:00
Benjamin Herrenschmidt efdad722ef Merge branch 'ps3' into next 2011-12-16 11:09:15 +11:00
Tony Breeds 228d550533 powerpc/47x: Add support for the new IBM currituck platform
Based on original work by David 'Shaggy' Kleikamp.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-12-09 07:51:40 -05:00
Anton Blanchard 7c637b04fb powerpc: Enable squashfs as a module
Most distros use it so we may as well enable it and get regular compile
testing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 14:22:54 +11:00
Benjamin Herrenschmidt 11eab297f5 powerpc: Add support for OpenBlockS 600
So I've had one of these for a while and it looks like the vendor never
bothered submitting the support upstream.

This adds it using ppc40x_simple and provides a device-tree.

There are some changes to the boot wrapper because the way u-boot works
on this thing, it seems to expect a multipart image with the kernel,
initrd and dtb in it.

The USB support is missing as it needs the yet unmerged driver for
the DWC OTG part and the GPIOs may need further definition in the dts.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 14:22:52 +11:00
Geoff Levand 987706acf8 powerpc/ps3: Update ps3_defconfig
Refresh ps3_defconfig to latest kernel sources and
change the options:

  CONFIG_PPP=m to CONFIG_PPP=n.
  CONFIG_NAMESPACES=y to CONFIG_NAMESPACES=n
  CONFIG_NUMA=y to CONFIG_NUMA=n

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-08 14:05:56 +11:00
Becky Bruce 1257a76547 powerpc: Enable hugetlb by default for corenet64 platforms
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07 16:26:23 +11:00
Becky Bruce 41caebd123 powerpc: Enable Hugetlb by default for 32-bit 85xx/corenet
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07 16:26:23 +11:00
Tanmay Inamdar d5b9ee7b51 powerpc/40x: Add APM8018X SOC support
The AppliedMicro APM8018X embedded processor targets embedded applications that
require low power and a small footprint. It features a PowerPC 405 processor
core built in a 65nm low-power CMOS process with a five-stage pipeline executing
up to one instruction per cycle. The family has 128-kbytes of on-chip memory,
a 128-bit local bus and on-chip DDR2 SDRAM controller with 16-bit interface.

Signed-off-by: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-11-30 10:02:15 -05:00
Jimi Xenidis cc35b67668 powerpc/book3e: Add Chroma as a new WSP/PowerEN platform.
This patch add the Chroma platform to WSP/PowerEN, which is a PCIe
card (a defconfig is included).

The card includes an H8 service processor that is used to manage the
card.  The H8 is connected over the second serial UART on the PowerEN
chip so this patch includes a simple 16550 driver to enable
communication, mostly for "power off" and "rebooting".

This patch also includes a, WSP specific, "halt" method that will shut
of all A2 cores but still leave power on at the chip level.  This is
desirable, especially if you wish to interrogate the chip with a
hardware probe after the halt.

Signed-off-by: Jimi Xenidis <jimix@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25 14:11:29 +11:00
Tony Breeds 49e44064d7 powerpc/44x: Add mtd ndfc to the ppx44x defconfig
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25 10:06:00 +11:00
Benjamin Herrenschmidt f81f5e14de Merge remote-tracking branch 'agust/next' into merge 2011-11-08 14:53:55 +11:00
Michael Neuling 88cf11b4cc powerpc: Add KVM as module to defconfigs
Add HV mode KVM to Book3 server 64bit defconfigs as a module.

Doesn't add much to the size:
   text	   data	    bss	     dec	    hex	filename
8244109	4686767	 994000	13924876	 d47a0c	vmlinux.vanilla
8256092 4691607  994128 13941827         d4bc43 vmlinux.kvm

This should enable more testing of this configuration.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-08 14:51:03 +11:00
Linus Torvalds 1197ab2942 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-06 17:12:03 -08:00
Shengzhou Liu 96cc017c5b powerpc/p3060qds: Add support for P3060QDS board
The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
The P3060 Processor combines six e500mc Power Architecture processor cores with
high-performance datapath acceleration architecture(DPAA), CoreNet fabric
infrastructure, as well as network and peripheral interfaces.

P3060QDS Board Overview:
Memory subsystem:
  - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
  - 128M Bytes NOR flash single-chip memory
  - 16M Bytes SPI flash
  - 8K Bytes AT24C64 I2C EEPROM
Ethernet:
  - 4x1G + 4x1G/2.5G Ethernet controllers
  - 2xRGMII + 1xMII, three VSC8641 PHYs on board
  - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
PCIe: Two PCI Express 2.0 controllers/ports
USB:  Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
I2C:  Four I2C controllers
UART: Supports up to four UARTs
RapidIO: Supports two serial RapidIO ports

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-03 13:20:47 -05:00
Becky Bruce 5c4a5b8de6 powerpc: Update corenet64_smp_defconfig
Updates from make savedefconfig.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 23:28:40 -05:00
Becky Bruce 7c4b2f099f powerpc: Update mpc85xx/corenet 32-bit defconfigs
Results from updates via make savedefconfig.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 23:28:38 -05:00
Holger Brunck 2a05e333c2 powerpc/82xx: updates for mgcoge
Add:
 - Setup dts node for USB
 - pin description and setup for SMC1 (serial interface)

Update and cleanup mgcoge_defconfig:
- enable: TIPC, UBIFS, USB_GADGET driver, SQUASHFS, HIGHRES timers
          POSIX_MQUEUE, EMBEDDED
- disable: EXT3, PPC_PMAC

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11 16:18:41 -05:00
Mingkai Hu d31337657b powerpc/85xx: Rename p2040_rdb.c to p2041_rdb.c
There's only p2041rdb board for official release, but the p2041 silicon
on the board can be converted to p2040 silicon without XAUI and L2 cache
function, then the board becomes p2040rdb board. so we use the file name
p2041_rdb.c to handle P2040RDB board and P2041RDB board which is also
consistent with the board name under U-Boot.

During the rename we make few other minor changes to the device tree:
* Move USB phy setting into p2041si.dtsi as its SoC not board defined
* Convert PCI clock-frequency to decimal to be more readable

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-06 23:32:57 -05:00
Heiko Schocher 6ecc07b966 powerpc, tqm5200: update tqm5200_defconfig to fit for charon board.
added:

CONFIG_MTD_OF_PARTS
CONFIG_MTD_PLATRAM
CONFIG_FIXED_PHY
CONFIG_SENSORS_LM80
CONFIG_MFD_SM501
CONFIG_FB
CONFIG_FB_FOREIGN_ENDIAN
CONFIG_FB_SM501
CONFIG_FRAMEBUFFER_CONSOLE
CONFIG_RTC_DRV_DS1374

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-29 15:36:33 +02:00
Wolfram Sang 7b72c9f875 powerpc: update 512x-defconfig
Activate all MPC512x related boards. Also enable GPIO-driver, SPI driver
and at25 to test SPI. Enable DEVTMPFS. Bump to 3.1-rc6.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-23 00:20:07 +02:00
Wolfram Sang c68308dd50 gpio: move mpc8xxx/512x gpio driver to drivers/gpio
Move the driver to the place where it is expected to be nowadays. Also
rename its CONFIG-name to match the rest and adapt the defconfigs.
Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to
the platforms, because this option is per-platform and not per-driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-23 00:14:15 +02:00
Timur Tabi 40dc7e8b4a powerpc/5200: enable audio in the defconfig
Audio support for the MPC5200 exists, so enable it by default.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:24:06 +02:00
David S. Miller 8decf86879 Merge branch 'master' of github.com:davem330/net
Conflicts:
	MAINTAINERS
	drivers/net/Kconfig
	drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
	drivers/net/ethernet/broadcom/tg3.c
	drivers/net/wireless/iwlwifi/iwl-pci.c
	drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
	drivers/net/wireless/rt2x00/rt2800usb.c
	drivers/net/wireless/wl12xx/main.c
2011-09-22 03:23:13 -04:00
Benjamin Herrenschmidt 1cce058b29 Merge remote-tracking branch 'origin/master' into next
(Merge in order to get the PCIe mps/mrss code fixes)
2011-09-20 15:52:38 +10:00
Kim Phillips e09e2fb513 powerpc/85xx: enable caam crypto driver by default
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver,
caam, and the algorithms it supports, and disable the
SEC2/3 driver, talitos.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30 21:27:30 -05:00
Timur Tabi 39c428f753 powerpc/85xx: enable the audio drivers in the defconfigs
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio
is enabled on the Freescale P1022DS reference board.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30 21:27:29 -05:00
Tony Breeds 3b3bceef26 net: fix IBM EMAC driver after rename.
In commit 9aa3283595 (ehea/ibm*: Move the
IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC*

The conversion was incomplete so that even if the driver was added to
the .config it wasn't built, but there were no errors).  In this commit
we also update the various defconfigs that use EMAC to use the new
Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard.

We do not explicitly select the Kconfig dependencies, as this would force
EMAC on.  Doing it in the defconfig allows more flexibility.

Tested on a canyondlands board.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18 21:33:49 -07:00
Josh Boyer 9fcd768d0c powerpc/40x: Remove obsolete HCU4 board
The HCU4 board is unmaintained.  Remove it.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11 13:56:43 -04:00
Benjamin Herrenschmidt 4b575f3e8a Merge remote-tracking branch 'jwb/next' into next 2011-07-22 13:16:41 +10:00
Anton Blanchard 7a0200f66b powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs
As a result of changes to Kconfig files, we no longer enable
the lockup and hung task detectors. Both are very light weight
and provide useful information in the event of a hang, so
reenable them.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:06 +10:00
Anton Blanchard b260281cd1 powerpc: Add mpt2sas driver to pseries and ppc64 defconfig
Add mpt2sas driver to pseries and ppc64 defconfig.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:06 +10:00
Anton Blanchard 241590c35f powerpc: Disable IRQs off tracer in ppc64 defconfig
The IRQs off tracer enables mcount which has a big impact on
performance. Disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:06 +10:00