This patch solves the following error:
arch/arm/boot/dts/rk3228-evb.dtb: ERROR (phandle_references): Reference to non-existent node or label "phy0"
Fixess db40f15b53 ("ARM: dts: rk3228-evb: Enable the integrated PHY for gmac")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MVPP22_XLG_CTRL1_FRAMESIZELIMIT define is used as an offset, but is
defined as BIT(0). Updated its name to contains "OFFS" as in offset and
fix its value using the offset value, 0.
Reported-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Fixes: 76eb1b1de5 ("net: mvpp2: set maximum packet size for 10G ports")
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-08-25
This series contains updates to i40e and i40evf only.
Mitch adjusts the max packet size to account for two VLAN tags.
Sudheer provides a fix to ensure that the watchdog timer is scheduled
immediately after admin queue operations are scheduled in i40evf_down().
Fixes an issue by adding locking around the admin queue command and
update of state variables so that adminq_subtask will have the accurate
information whenever it gets scheduled.
Anjali fixes a bug where the PF flag setup should happen before the VMDq
RSS queue count is initialized for VMDq VSI to get the right number of
queues for RSS in the case of x722 devices. Fixed a problem with the
hardware ATR eviction feature where the NVM setting was incorrect.
Jake separates the flags into two types, hw_features and flags. The
hw_features flags contain a set of features which are enabled at init
time and will not contain feature flags that can be toggled. Everything
else will remain in the flags variable, and can be modified anytime
during run time. We should not be directly copying a cpumask_t, since
it is bitmap and might not be copied correctly, so use cpumask_copy()
instead.
Stefan Assmann makes vf _offload_flags more "generic" by renaming it to
vf_cap_flags, which allows other capabilities besides offloading to be
added.
Alan makes it such that if adaptive-rx/tx is enabled, the user cannot
make any manual adjustments to interrupt moderation. Also makes it so
that if ITR is disabled by adaptive-rx/tx is then enabled, ITR will be
re-enabled.
v2: Dropped patches #1 & #8 from the original patch series submission,
while Jesse and Jake re-work their patches based on feedback from
David Miller. Also removed the duplicate patch 3 that was
accidentally sent out twice in the previous submission.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: SR-IOV ndos support
This set adds basic SR-IOV including setting/getting VF MAC addresses,
VLANs, link state and spoofcheck settings. It is wired up for both
vNICs and representors (note: ip link will not report VF settings on
VF/PF representors because they are not linked to the PF PCI device).
Pablo and team add the basic implementation, Simon and Dirk follow
up with the representor plumbing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic ndo_set/get_vf to support SR-IOV on all types
of port representors.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic ndo_set/get_vf to support SR-IOV.
VF to egress phy static mapping by now.
Use vfcfg ABI version 2 to write the info to the FW and collect
the return value from the mailbox.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Jimmy Kizito <jimmy.kizito@netronome.com>
Signed-off-by: Rami Tomer <rami.tomer@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syszkaller got a hang in tcp stack, related to a bug in
tcp_sendpage_locked()
root@syzkaller:~# cat /proc/3059/stack
[<ffffffff83de926c>] __lock_sock+0x1dc/0x2f0
[<ffffffff83de9473>] lock_sock_nested+0xf3/0x110
[<ffffffff8408ce01>] tcp_sendmsg+0x21/0x50
[<ffffffff84163b6f>] inet_sendmsg+0x11f/0x5e0
[<ffffffff83dd8eea>] sock_sendmsg+0xca/0x110
[<ffffffff83dd9547>] kernel_sendmsg+0x47/0x60
[<ffffffff83de35dc>] sock_no_sendpage+0x1cc/0x280
[<ffffffff8408916b>] tcp_sendpage_locked+0x10b/0x160
[<ffffffff84089203>] tcp_sendpage+0x43/0x60
[<ffffffff841641da>] inet_sendpage+0x1aa/0x660
[<ffffffff83dd4fcd>] kernel_sendpage+0x8d/0xe0
[<ffffffff83dd50ac>] sock_sendpage+0x8c/0xc0
[<ffffffff81b63300>] pipe_to_sendpage+0x290/0x3b0
[<ffffffff81b67243>] __splice_from_pipe+0x343/0x750
[<ffffffff81b6a459>] splice_from_pipe+0x1e9/0x330
[<ffffffff81b6a5e0>] generic_splice_sendpage+0x40/0x50
[<ffffffff81b6b1d7>] SyS_splice+0x7b7/0x1610
[<ffffffff84d77a01>] entry_SYSCALL_64_fastpath+0x1f/0xbe
Fixes: 306b13eb3c ("proto_ops: Add locked held versions of sendmsg and sendpage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang says:
====================
net_sched: clean up tc classes and u32 filter
Patch 1 and patch 2 prepare for patch 3. Major changes
are in patch 3 and patch 4, details are there too.
v2: Add patch 1 and 2, group all into a patchset
Fix a coding style issue in patch 4
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is ugly to hide a u32-filter-specific pointer inside Qdisc,
this breaks the TC layers:
1. Qdisc is a generic representation, should not have any specific
data of any type
2. Qdisc layer is above filter layer, should only save filters in
the list of struct tcf_proto.
This pointer is used as the head of the chain of u32 hash tables,
that is struct tc_u_hnode, because u32 filter is very special,
it allows to create multiple hash tables within one qdisc and
across multiple u32 filters.
Instead of using this ugly pointer, we can just save it in a global
hash table key'ed by (dev ifindex, qdisc handle), therefore we can
still treat it as a per qdisc basis data structure conceptually.
Of course, because of network namespaces, this key is not unique
at all, but it is fine as we already have a pointer to Qdisc in
struct tc_u_common, we can just compare the pointers when collision.
And this only affects slow paths, has no impact to fast path,
thanks to the pointer ->tp_c.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For TC classes, their ->get() and ->put() are always paired, and the
reference counting is completely useless, because:
1) For class modification and dumping paths, we already hold RTNL lock,
so all of these ->get(),->change(),->put() are atomic.
2) For filter bindiing/unbinding, we use other reference counter than
this one, and they should have RTNL lock too.
3) For ->qlen_notify(), it is special because it is called on ->enqueue()
path, but we already hold qdisc tree lock there, and we hold this
tree lock when graft or delete the class too, so it should not be gone
or changed until we release the tree lock.
Therefore, this patch removes ->get() and ->put(), but:
1) Adds a new ->find() to find the pointer to a class by classid, no
refcnt.
2) Move the original class destroy upon the last refcnt into ->delete(),
right after releasing tree lock. This is fine because the class is
already removed from hash when holding the lock.
For those who also use ->put() as ->unbind(), just rename them to reflect
this change.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like for TC actions, ->delete() is a special case,
we have to prepare and fill the notification before delete
otherwise would get use-after-free after we remove the
reference count.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is not needed if we move them up properly.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb_pad() function frees the skb on error, so this code has a double
free.
Fixes: 00e57a6d4a ("net-next/hinic: Add Tx operation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Lebrun says:
====================
net: updates for IPv6 Segment Routing
v2: seg6_lwt_headroom() is not relevant for lwtunnel_input_redirect()
use cases, and L2ENCAP only uses this redirection. Fix incoherence
between arbitrary MAC header size support and fixed headroom
computation by setting only LWTUNNEL_STATE_INPUT_REDIRECT for L2ENCAP
mode.
This patch series provides several updates for the SRv6 implementation. The
first patch leverages the existing infrastructure to support encapsulation
of IPv4 packets. The second patch implements the T.Encaps.L2 SR function,
enabling to encapsulate an L2 Ethernet frame within an IPv6+SRH packet.
The last three patches update the seg6local lightweight tunnel, and mainly
implement four new actions: End.T, End.DX2, End.DX4 and End.DT6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the following seg6local actions.
- SEG6_LOCAL_ACTION_END_T: regular SRH processing and forward to the
next-hop looked up in the specified routing table.
- SEG6_LOCAL_ACTION_END_DX2: decapsulate an L2 frame and forward it to
the specified network interface.
- SEG6_LOCAL_ACTION_END_DX4: decapsulate an IPv4 packet and forward it,
possibly to the specified next-hop.
- SEG6_LOCAL_ACTION_END_DT6: decapsulate an IPv6 packet and forward it
to the next-hop looked up in the specified routing table.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds three helper functions to be used with the seg6local packet
processing actions.
The decap_and_validate() function will be used by the End.D* actions, that
decapsulate an SR-enabled packet.
The advance_nextseg() function applies the fundamental operations to update
an SRH for the next segment.
The lookup_nexthop() function helps select the next-hop for the processed
SR packets. It supports an optional next-hop address to route the packet
specifically through it, and an optional routing table to use.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch ensures that the seg6local lightweight tunnel is used solely
with IPv6 routes and processes only IPv6 packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the L2 frame encapsulation mechanism, referred to
as T.Encaps.L2 in the SRv6 specifications [1].
A new type of SRv6 tunnel mode is added (SEG6_IPTUN_MODE_L2ENCAP). It only
accepts packets with an existing MAC header (i.e., it will not work for
locally generated packets). The resulting packet looks like IPv6 -> SRH ->
Ethernet -> original L3 payload. The next header field of the SRH is set to
NEXTHDR_NONE.
[1] https://tools.ietf.org/html/draft-filsfils-spring-srv6-network-programming-01
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables the SRv6 encapsulation mode to carry an IPv4 payload.
All the infrastructure was already present, I just had to add a parameter
to seg6_do_srh_encap() to specify the inner packet protocol, and perform
some additional checks.
Usage example:
ip route add 1.2.3.4 encap seg6 mode encap segs fc00::1,fc00::2 dev eth0
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
During NVM update, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated. This causes
incorrect input to i40e_nvmupd_check_wait_event and state transitions
don't happen.
This issue existed before but surfaced after commit 373149fc99
("i40e: Decrease the scope of rtnl lock")
This fix adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently the driver allows the user to change (or even disable)
interrupt moderation if adaptive-rx/tx is enabled when this should
not be the case.
Adaptive RX/TX will not respect the user's ITR settings so
allowing the user to change it is weird. This bug would also
allow the user to disable interrupt moderation with adaptive-rx/tx
enabled which doesn't make much sense either.
This patch makes it such that if adaptive-rx/tx is enabled, the user
cannot make any manual adjustments to interrupt moderation. It also
makes it so that if ITR is disabled but adaptive-rx/tx is then
enabled, ITR will be re-enabled.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
According to the header file cpumask.h, we shouldn't be directly copying
a cpumask_t, since its a bitmap and might not be copied correctly. Lets
use the provided cpumask_copy() function instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If we're going to bother initializing a variable to reference it we might
as well use it.
Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The current name of vf_offload_flags indicates that the bitmap is
limited to offload related features. Make this more generic by renaming
it to vf_cap_flags, which allows for other capabilities besides
offloading to be added.
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In i40e_vsi_add_vlan we treat attempting to add VID=0 as an error,
because it does not do what the caller might expect. We already special
case VID=0 in i40e_vlan_rx_add_vid so that we avoid this error when
adding the VLAN.
This special casing is necessary so that we do not add the VLAN=0 filter
since we don't want to stop receiving untagged traffic. Unfortunately,
not all callers of i40e_vsi_add_vlan are aware of this, including when
we add VLANs from a VF device.
Rather than special casing every single caller of i40e_vsi_add_vlan,
lets just move this check internally. This makes the code simpler
because the caller does not need to be aware of how VLAN=0 is special,
and we don't forget to add this check in new places.
This fixes a harmless error message displaying when adding a VLAN from
within a VF. The message was meaningless but there is no reason to
confuse end users and system administrators, and this is now avoided.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When a user gives an invalid command to change a private flag which is
not supported, either because it is read-only, or the device is not
capable of the feature, we simply ignore the request.
A naive solution would simply be to report error codes when one of the
flags was not supported. However, this causes problems because it makes
the operation not atomic. If a user requests multiple private flags
together at once we could end up changing one before failing at the
second flag.
We can do a bit better if we instead update a temporary copy of the
flags variable in the loop, and then copy it into place after. If we
aren't careful this has the pitfall of potentially silently overwriting
any changes caused by other threads.
Avoid this by using cmpxchg64 which will compare and swap the flags
variable only if it currently matched the old value. We'll report
-EAGAIN in the (hopefully rare!) case where the cmpxchg64 fails.
This ensures that we can properly report when flags are not supported in
an atomic fashion without the risk of overwriting other threads changes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes a problem with the HW ATR eviction feature where the
NVM setting was incorrect. This patch detects the issue on X720
adapters and disables the feature if the NVM setting is incorrect.
Without this patch, HW ATR Evict feature does not work on broken NVMs
and is not detected either. If the HW ATR Evict feature is disabled
the SW Eviction feature will take effect.
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Since commit b499ffb0a2 ("i40e: Look up MAC address in Open Firmware
or IDPROM"), we've had support for obtaining the MAC address
form Open Firmware or IDPROM.
This code relied on sending the Open Firmware address directly to the
device firmware instead of relying on our MAC/VLAN filter list. Thus,
a work around was introduced in commit b1b15df592 ("i40e: Explicitly
write platform-specific mac address after PF reset")
We refactored the Open Firmware address enablement code in the ill-named
commit 41c4c2b50d ("i40e: allow look-up of MAC address from Open
Firmware or IDPROM")
Since this refactor, we no longer even set I40E_FLAG_PF_MAC. Further, we
don't need this work around, because we actually store the MAC address
as part of the MAC/VLAN filter hash. Thus, we will restore the address
correctly upon reset.
The refactor above failed to revert the workaround, so do that now.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The number of flags found in pf->flags has grown quite large, and there
are a lot of different types of flags. Most of the flags are simply
hardware features which are enabled on some firmware or some MAC types.
Other flags are dynamic run-time flags which enable or disable certain
features of the driver.
Separate these two types of flags into pf->hw_features and pf->flags.
The hw_features list will contain a set of features which are enabled at
init time. This will not contain toggles or otherwise dynamically
changing features. These flags should not need atomic protections, as
they will be set once during init and then be essentially read only.
Everything else will remain in the flags variable. These flags may be
modified at any time during run time. A future patch may wish to convert
these flags into set_bit/clear_bit/test_bit or similar approach to
ensure atomic correctness.
The I40E_FLAG_MFP_ENABLED flag may be a good fit for hw_features but
currently is used by ethtool in the private flags settings, and thus has
been left as part of flags.
Additionally, I40E_FLAG_DCB_CAPABLE may be a good fit for the
hw_features but this patch has not tried to untangle it yet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The X722 pf flag setup should happen before the VMDq RSS queue count is
initialized for VMDq VSI to get the right number of queues for RSS in
case of X722 devices.
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently i40evf_close() can return before state transitions to
__I40EVF_DOWN because of the latency involved in processing and
receiving response from PF driver and scheduling of VF watchdog_task.
Due to this inconsistency an immediate call to i40evf_open() fails
because state is still DOWN_PENDING.
When a VF interface is in up state and we try to add it as slave,
The bonding driver calls dev_close() and dev_open() in short duration
resulting in dev_open returning error. The ifenslave command needs
to be run again for dev_open to succeed.
This fix ensures that watchdog timer is scheduled immediately after
admin queue operations are scheduled in i40evf_down(). In addition a
wait condition is added at the end of i40evf_close so that function
wont return when state is still DOWN_PENDING. The timeout value is
chosen after some profiling and includes some buffer.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Now that the kernel supports double VLAN tags, we should at least play
nice. Adjust the max packet size to account for two VLAN tags, not just
one.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
We now remove rndis filter before unregister_netdev(), which calls
device close. It involves closing rndis filter already removed.
This patch fixes this error.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series includes updates to mlx5 core driver.
From Gal and Saeed, three cleanup patches.
From Matan, Low level flow steering improvements and optimizations,
- Use more efficient data structures for flow steering objects handling.
- Add tracepoints to flow steering operations.
- Overall these patches improve flow steering rule insertion rate by a
factor of seven in large scales (~50K rules or more).
-Saeed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZntEwAAoJEEg/ir3gV/o+ghgIAJ5UBPWvZspnbQJHBopsJh47
d4qt4HrcxxoA07d7QflGSmzqqvoX87eo6mVMQ/WkB+0D8KxggXYr75EOk4lQeYYo
kiZ+4GdR6UaeQMhykcThKUyEpv60/8wLmXaHvhdWOaVsmzAFwQK0u5HGJlW14lzx
LHvJGWG377zu+SdpR6wNDrwaHhk2B4Azqb5bomiGTPCg1RdZv3i37/hbF00X9GHB
ZzPg3Mc5RQvF1fu9H35x4f15pturmMbtuGzmR2oKHMmNS2XQd6lFFlXfQxVUxtdg
hvAj7RYFrmY1fAPp9cMZbB5ibKkFUFE6idebfrTIrVQrbxv9o0nwRvZTB4lbe9U=
=hpBO
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2017-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2017-08-24
This series includes updates to mlx5 core driver.
From Gal and Saeed, three cleanup patches.
From Matan, Low level flow steering improvements and optimizations,
- Use more efficient data structures for flow steering objects handling.
- Add tracepoints to flow steering operations.
- Overall these patches improve flow steering rule insertion rate by a
factor of seven in large scales (~50K rules or more).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We never set the error code in this function.
Fixes: eabf0fad81 ("net-next/hinic: Initialize api cmd resources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
txq_reclaim() does the normal transmit queue reclamation and
rxq_deinit() does the RX ring cleanup, none of these are packet drops,
so use dev_consume_skb() for both locations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tg3_tx() does the normal packet TX completion,
tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a
new SKB that is suitable to workaround HW bugs, and finally
tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for
these 3 locations to be SKB drop monitor friendly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki says:
====================
ipv6: Route ICMPv6 errors with the flow when ECMP in use
This patch set is another take at making Path MTU Discovery work when
server nodes are behind a router employing multipath routing in a
load-balance or anycast setup (that is, when not every end-node can be
reached by every path). The problem has been well described in RFC 7690
[1], but in short - in such setups ICMPv6 PTB errors are not guaranteed
to be routed back to the server node that sent a reply that exceeds path
MTU.
The proposed solution is two-fold:
(1) on the server side - reflect the Flow Label [2]. This can be done
without modifying the application using a new per-netns sysctl knob
that has been proposed independently of this patchset in the patch
entitled "ipv6: Add sysctl for per namespace flow label
reflection" [3].
(2) on the ECMP router - make the ipv6 routing subsystem look into the
ICMPv6 error packets and compute the flow-hash from its payload,
i.e. the offending packet that triggered the error. This is the
same behavior as ipv4 stack has already.
With both parts in place Path MTU Discovery can work past the ECMP
router when using IPv6.
[1] https://tools.ietf.org/html/rfc7690
[2] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
[3] http://patchwork.ozlabs.org/patch/804870/
v1 -> v2:
- don't use "extern" in external function declaration in header file
- style change, put as many arguments as possible on the first line of
a function call, and align consecutive lines to the first argument
- expand the cover letter based on the feedback
v2 -> v3:
- switch to computing flow-hash using flow dissector to align with
recent changes to multipath routing in ipv4 stack
- add a sysctl knob for enabling flow label reflection per netns
---
Testing has covered multipath routing of ICMPv6 PTB errors in forward
and local output path in a simple use-case of an HTTP server sending a
reply which is over the path MTU size [3]. I have also checked if the
flows get evenly spread over multiple paths (i.e. if there are no
regressions) [4].
[3] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/pmtud
[4] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/load-balance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow our callers to influence the choice of ECMP link by honoring the
hash passed together with the flow info. This allows for special
treatment of ICMP errors which we would like to route over the same path
as the IPv6 datagram that triggered the error.
Also go through rt6_multipath_hash(), in the usual case when we aren't
dealing with an ICMP error, so that there is one central place where
multipath hash is computed.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 644d0e6569 ("ipv6 Use get_hash_from_flowi6 for rt6 hash") has
turned rt6_info_hash_nhsfn() into a one-liner, so it no longer makes
sense to keep it around. Also remove the accompanying comment that has
become outdated.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When forwarding or sending out an ICMPv6 error, look at the embedded
packet that triggered the error and compute a flow hash over its
headers.
This let's us route the ICMP error together with the flow it belongs to
when multipath (ECMP) routing is in use, which in turn makes Path MTU
Discovery work in ECMP load-balanced or anycast setups (RFC 7690).
Granted, end-hosts behind the ECMP router (aka servers) need to reflect
the IPv6 Flow Label for PMTUD to work.
The code is organized to be in parallel with ipv4 stack:
ip_multipath_l3_keys -> ip6_multipath_l3_keys
fib_multipath_hash -> rt6_multipath_hash
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow for functions that fill out the IPv6 flow info to also pass a hash
computed over the skb contents. The hash value will drive the multipath
routing decisions.
This is intended for special treatment of ICMPv6 errors, where we would
like to make a routing decision based on the flow identifying the
offending IPv6 datagram that triggered the error, rather than the flow
of the ICMP error itself.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One too many arguments compared to the non-stub version.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: ffd3cdccf2 ("devlink: Add support for dynamic table size")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reflecting IPv6 Flow Label at server nodes is useful in environments
that employ multipath routing to load balance the requests. As "IPv6
Flow Label Reflection" standard draft [1] points out - ICMPv6 PTB error
messages generated in response to a downstream packets from the server
can be routed by a load balancer back to the original server without
looking at transport headers, if the server applies the flow label
reflection. This enables the Path MTU Discovery past the ECMP router in
load-balance or anycast environments where each server node is reachable
by only one path.
Introduce a sysctl to enable flow label reflection per net namespace for
all newly created sockets. Same could be earlier achieved only per
socket by setting the IPV6_FL_F_REFLECT flag for the IPV6_FLOWLABEL_MGR
socket option.
[1] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make this const as it is only passed as an argument to the function
mlx5e_create_netdev and the corresponding argument is of type const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make these const as they are only used in a copy operation.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer says:
====================
xdp: more work on xdp tracepoints
More work on streamlining and performance optimizing the tracepoints
for XDP.
I've created a simple xdp_monitor application that uses this
tracepoint, and prints statistics. Available at github:
https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_kern.chttps://github.com/netoptimizer/prototype-kernel/blob/master/kernel/samples/bpf/xdp_monitor_user.c
The improvement over tracepoint with strcpy: 9810372 - 8428762 = +1381610 pps faster
- (1/9810372 - 1/8428762)*10^9 = -16.7 nanosec
- 100-(8428762/9810372*100) = strcpy-trace is 14.08% slower
- 981037/8428762*100 = removing strcpy made it 11.64% faster
V3: Fix merge conflict with commit e4a8e817d3 ("bpf: misc xdp redirect cleanups")
V2: Change trace_xdp_redirect() to align with args of trace_xdp_exception()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the net_device string name from the xdp_exception tracepoint,
like the xdp_redirect tracepoint.
Align the TP_STRUCT to have common entries between these two
tracepoint.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is too much overhead in the current trace_xdp_redirect
tracepoint as it does strcpy and strlen on the net_device names.
Besides, exposing the ifindex/index is actually the information that
is needed in the tracepoint to diagnose issues. When a lookup fails
(either ifindex or devmap index) then there is a need for saying which
to_index that have issues.
V2: Adjust args to be aligned with trace_xdp_exception.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wu