Both drivers shut down all crtc beforehand already, which will shut up
any pending vblank (the only thing vblank_cleanup really does is
disable the disable timer). Hence we don't need this here and can
remove it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-2-daniel.vetter@ffwll.ch
For RK3399's GRF module, if we want to operate the graphic related grf
registers, we need to enable the pclk_vio_grf which supply power for VIO
GRF IOs, so it's better to introduce an optional grf clock in driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
For RK3399 HDMI, there is an external clock need for HDMI PHY,
and it should keep the same clock rate with VOP DCLK.
VPLL have supported the clock for HDMI PHY, but there is no
clock divider bewteen VPLL and HDMI PHY. So we need to set the
VPLL rate manually in HDMI driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
RK3399 and RK3288 shared the same HDMI IP controller, only some light
difference with GRF configure.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
All layers of all supported chips support this, the only variable is the
base address of the lookup table in the register map.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-3-git-send-email-peda@axentia.se
Now that we're using the atomic helpers for fence waits, we can use
the same codepath as drm_atomic_helper_commit() does for async,
getting rid of our custom vc4_commit struct.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-3-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
We should allow SIGIO and things to interrupt us before we get to the
no-error stage of the commit process. This code is effectively copied
from drm_atomic_helper_commit().
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-2-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This way drm_atomic_helper_wait_for_fences() will actually do
something. The vc4_seqno_cb has been doing the fence waits on V3D
manually, so far.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621185002.28563-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
With instantaneous high precision vblank timestamping
that updates at leading edge of vblank, the emulated
"hw vblank counter" from vblank timestamping which
increments at leading edge of vblank, and reliable
page flip execution and completion at leading edge
of vblank, we should meet the requirements for fast
vblank irq disable/enable.
Testing against rpi-4.12-rc5 Linux kernel with timing
measurement equipment indicates this works fine,
so allow immediate vblank disable for power saving.
For debugging in case of unexpected trouble, booting
with kernel cmdline option drm.vblankoffdelay=0
would keep vblank irqs on to approximate old behavior.
v2: Respin onto drm-misc-next, per Eric's suggestion.
Drop !vc4->firmware_kms check, as the firmware_kms
implementation does not exist in upstream.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622012811.2139-1-mario.kleiner.de@gmail.com
Add an helper to wait for all page flips of an atomic state to be done.
v2:
- Pimp kerneldoc as discussed with Boris on irc
- Add missing doc for @dev.
- Use old_state for consitency with wait_for_vblanks
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v1)
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-2-git-send-email-boris.brezillon@free-electrons.com
Now that we have a callback to check if crtc supports a given mode
we can use it in arcpgu so that we restrict the number of probbed
modes to the ones we can actually display.
This is specially useful because arcpgu crtc is responsible to set
a clock value in the commit() stage but unfortunatelly this clock
does not support all the needed ranges.
Also, remove the atomic_check() callback as mode_valid() callback
will be called before.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Changes v4->v5:
- Change commit message to "arcpgu" (Alexey)
Changes v3->v4:
- Do not use aux function (Laurent)
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/c3bcd69016c77f68a03ff3cb6b22ca6f90e930b0.1495720737.git.joabreu@synopsys.com
It doesn't do anything in the driver load error paths that the drm
core doesn't also do (cleanup is done in drm_dev_fini).
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-10-daniel.vetter@ffwll.ch
VBLANK events are missed when the CRTC is being disabled because the
driver does not wait till the end of the frame before stopping the
HVS and PV blocks. In this case, we should explicitly issue a VBLANK
event if there's one waiting.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1497601833-24588-1-git-send-email-boris.brezillon@free-electrons.com
I've failed to remember that we have virtual drivers like vgem which
have no underlying struct device. Fix this asap.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 5c484cee7e ("drm: Remove drm_driver->set_busid hook")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621130429.20537-1-daniel.vetter@ffwll.ch
drm_fbdev_cma_hotplug_event() already checks for NULL pointers before
dereferencing, so callers don't need to do that.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329144401.1804-11-thierry.reding@gmail.com
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8836 744 0 9580 256c drivers/gpu/drm/armada/armada_crtc.o
File size after constify armada_lcd_of_match:
text data bss dec hex filename
9220 328 0 9548 254c drivers/gpu/drm/armada/armada_crtc.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ff9a9a908cf347775ab62cfadfde986de72dcf13.1497935382.git.arvind.yadav.cs@gmail.com
drm_fbdev_cma_set_suspend{,_unlocked} use an integer parameter
to describe whether the intended state is a suspend or a resume.
It then passes the value to drm_fb_helper_set_suspend{,_unlocked}
which uses a boolean. Switch to using bool everywhere.
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620102320.8849-1-Liviu.Dudau@arm.com
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
15845 640 0 16485 4065 drivers/gpu/drm/sti/sti_hqvdp.o
File size after constify hqvdp_of_match:
text data bss dec hex filename
16229 224 0 16453 4045 drivers/gpu/drm/sti/sti_hqvdp.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/0a6ae44cf7d0fb54380809ae0e52234dbd3f367a.1497934979.git.arvind.yadav.cs@gmail.com
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4222 664 0 4886 1316 drivers/gpu/drm/sti/sti_dvo.o
File size after constify dvo_of_match:
text data bss dec hex filename
4638 248 0 4886 1316 drivers/gpu/drm/sti/sti_dvo.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/d5ac3cb4c43338419308d658b9bcb59b7540471e.1497868332.git.arvind.yadav.cs@gmail.com
It's not obvious that when using the new color manager stuff you still
need to wire up the legacy helper to get legacy LUT support. Improve
this with more links. drm_crtc_funcs->gamma_set already explains this
properly.
Cc: Peter Rosin <peda@axentia.se>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620094228.4757-1-daniel.vetter@ffwll.ch
Now that we have a callback to check if crtc and encoder supports a
given mode we can use it in vc4 so that we restrict the number of
probed modes to the ones we can actually display.
Also, remove the mode_fixup() calls as these are no longer needed
because mode_valid() will be called before.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Compile-tested and Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5bea792f91074688c88a2dab8b0a90eec6e98fdf.1495720737.git.joabreu@synopsys.com
I spotted a markup issue, plus adding the descriptions in drm_driver.
Plus a few more links while at it.
I'm still mildly unhappy with the split between fops and ioctls, but I
still think having the ioctls in the uapi chapter makes more sense. Oh
well ...
v2: Rebase.
v3: Move misplace hunk to the right patch.
Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092045.3950-1-daniel.vetter@ffwll.ch
The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch
Since
commit ca8e2ad710
Author: Thierry Reding <treding@nvidia.com>
Date: Fri Apr 11 15:23:00 2014 +0200
drm: Introduce drm_dev_set_unique()
the ->set_busid callback is optional. On top of that the udl one isn't
really fully compliant with the drm uabi, but since only modesetting
ever binds to it (there's no 3d accel on udl) it doesn't matter.
Still, can't harm to aling and use the default used by everyone else.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-4-daniel.vetter@ffwll.ch
We use drm_crtc_ for all the new-style vblank functions which directly
take a struct drm_crtc *. drm_accurate_vblank_count was the odd one
out, correct this to appease my OCD.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-13-daniel.vetter@ffwll.ch
I alwasy get confused about drm_wait_vblank for a split second until I
realize it's the ioctl handler. Unconfuse me, and do it for the legacy
modeset vblank control ioctl too.
While at it also noticed that I misplaced the irq ioctl handler in the
internal header file.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-12-daniel.vetter@ffwll.ch
Unify and review everything, plus make sure it's all correct markup.
Drop the kernel-doc for internal functions. Also rework the overview
section, it's become rather outdated.
Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but
that will change as soon as drm_driver is kernel-docified properly.
Also document properly that drm_vblank_cleanup is optional, the core
calls this already.
v2: Make it clear that cleanup happens in drm_dev_fini for drivers
with their own ->release callback (Thierry).
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-11-daniel.vetter@ffwll.ch
This allows mesa to set the tiling format for a BO and have that
tiling format be respected by mesa on the other side of an
import/export (and by vc4 scanout in the kernel), without defining a
protocol to pass the tiling through userspace.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-2-eric@anholt.net
Acked-by: Dave Airlie <airlied@redhat.com>
The T tiling format is what V3D uses for textures, with no raster
support at all until later revisions of the hardware (and always at a
large 3D performance penalty). If we can't scan out V3D's format,
then we often need to do a relayout at some stage of the pipeline,
either right before texturing from the scanout buffer (common in X11
without a compositor) or between a tiled screen buffer right before
scanout (an option I've considered in trying to resolve this
inconsistency, but which means needing to use the dirty fb ioctl and
having some update policy).
T-format scanout lets us avoid either of those shadow copies, for a
massive, obvious performance improvement to X11 window dragging
without a compositor. Unfortunately, enabling a compositor to work
around the discrepancy has turned out to be too costly in memory
consumption for the Raspbian distribution.
Because the HVS operates a scanline at a time, compositing from T does
increase the memory bandwidth cost of scanout. On my 1920x1080@32bpp
display on a RPi3, we go from about 15% of system memory bandwidth
with linear to about 20% with tiled. However, for X11 this still ends
up being a huge performance win in active usage.
This patch doesn't yet handle src_x/src_y offsetting within the tiled
buffer. However, we fail to do so for untiled buffers already.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Smaller scope reduces visibility of variable and makes usage of
uninitialized variable less possible.
Changes in v2:
- separate declaration and initialization
Changes in v3:
- add missing signed-off-by tag
Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com
According to the eLCDIF initialization steps listed in the MX6SX
Reference Manual the eLCDIF block reset is mandatory.
Without performing the eLCDIF reset the display shows garbage content
when the kernel boots.
In earlier tests this issue has not been observed because the bootloader
was previously showing a splash screen and the bootloader display driver
does properly implement the eLCDIF reset.
Add the eLCDIF reset to the driver, so that it can operate correctly
independently of the bootloader.
Tested on a imx6sx-sdb board.
Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com
This patch supports TM2e panel and the panel has 1600x2560 resolution
in 5.65" physical.
This identify panel type with compatibility string, also invoke
display mode that matches the type. So add the check code for s6e3ha2
compatibility and s6e3hf2 type and select the drm_display_mode of
default and edge type.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
[treding@nvidia.com: fixup checkpatch warnings]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com
The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected
using MIPI-DSI interfaces.
The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a
panel similar to the s6e3ha2. So add the compatible string and
comments.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-2-git-send-email-hoegeun.kwon@samsung.com
Without the dependency, we run into a link error:
drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe':
panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node'
Fixes: 7142afb3a1 ("drm/panel: Add driver for sitronix ST7789V LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de
The new S6E3HA2 driver fails to link when backlight is disabled:
ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
This adds a Kconfig dependency like we have it for some other panel drivers.
Fixes: ed29f9426d ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de
This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de
Daniel Vetter