openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
855,686 Commits 19 Branches 27 Tags 3.4 GiB
Commit Graph

19351 Commits

Author SHA1 Message Date
Olof Johansson 7bd9d46514 i.MX fixes for 5.3: 
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
  - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
  - Fix typo of clock frequency property name in a few i.MX6UL board
    I2C buses.
  - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
    with i.MX6SX SAI.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdNs2iAAoJEFBXWFqHsHzOyZ8H/3u3AjWSJxUa845cro1Q/Ibh
 Ap2Skk9NgX3Wo9oRaet6Nc44iXG4zBXYfhVyzUG5H6t2mk4S2c2RaKLd55n6mHz0
 6q1G57Z9ogxBzXrWgbiZtlCOlzZCNXVWZiB5eIUT12Mway+0HMEe4zcKAEvADZnt
 c2tFf2AbjRe0ye1M2a6V09/TunIT8Hv2XH88vA4MxAJauOWNTkx4TrmXVNnokax+
 S5Ha0Djr7seuHf6HLr95lB7QAj0ozTpZY17HsOmdFaO2UREVftm7JMhaNmxL072u
 by1hwAALp9vYaDDzfw+7NjaquJiF6rGO6Vgi78d3brBFcXPSXmXpufUffl1aFWE=
 =pQlh
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.3:
 - Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
 - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
 - Fix typo of clock frequency property name in a few i.MX6UL board
   I2C buses.
 - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
   with i.MX6SX SAI.

* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-23 10:13:24 -07:00
Arnd Bergmann 3a9d2569e4 ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux 
The mdio-bus-mux has no #address-cells/#size-cells property,
which causes a few dtc warnings:

arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value

Add the normal cell numbers.

Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de
Fixes: 2bebdfcdcd ("ARM: dts: BCM5301X: Add support for Linksys EA9500")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-23 10:12:55 -07:00
Sébastien Szymanski 2ca9939633 ARM: dts: imx6ul: fix clock frequency property name of I2C buses 
A few boards set clock frequency of their I2C buses with
"clock_frequency" property. The right property is "clock-frequency".

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-07-22 15:42:22 +08:00
Fabio Estevam 6e998ef24d ARM: dts: imx7ulp: Fix usb-phy unit address format 
The following warning is seen when building with W=1:

arch/arm/boot/dts/imx7ulp.dtsi:189.31-195.5: Warning (simple_bus_reg): /bus@40000000/usb-phy@0x40350000: simple-bus unit address format error, expected "40350000"

Fix it as suggested by removing the extra "0x" notation.

Fixes: 5b7bd45631 ("ARM: dts: imx7ulp: add imx7ulp USBOTG1 support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-07-22 09:42:19 +08:00
Linus Torvalds af6af87d7e ARM: Device-tree updates 
We continue to see a lot of new material. I've highlighted some of it
 below, but there's been more beyond that as well.
 
 One of the sweeping changes is that many boards have seen their ARM Mali
 GPU devices added to device trees, since the DRM drivers have now been
 merged.
 
 So, with the caveat that I have surely missed several great
 contributions, here's a collection of the material this time around:
 
 New SoCs:
 
  - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
 
  - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
 
  - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
 
 New Boards / platforms:
 
  - Aspeed BMC support for a number of new server platforms
 
  - Kontron SMARC SoM (several i.MX6 versions)
 
  - Novtech's Meerkat96 (i.MX7)
 
  - ST Micro Avenger96 board
 
  - Hardkernel ODROID-N2 (Amlogic G12B)
 
  - Purism Librem5 devkit (i.MX8MQ)
 
  - Google Cheza (Qualcomm SDM845)
 
  - Qualcomm Dragonboard 845c (Qualcomm SDM845)
 
  - Hugsun X99 TV Box (Rockchip RK3399)
 
  - Khadas Edge/Edge-V/Captain (Rockchip RK3399)
 
 Updated / expanded boards and platforms:
 
  - Renesas r7s9210 has a lot of new peripherals added
 
  - Polish and fixes for Rockchip-based Chromebooks
 
  - Amlogic G12A has a lot of peripherals added
 
  - Nvidia Jetson Nano sees various fixes and improvements, and is now at
    feature parity with TX1
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yUswPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3BrEP/2Hrqr9MHWSZ65iLmRkrMIMQ0nxxngN5//Jt
 AlrmyBixwnV3l1eP5lpZT9VlXQL8lo7fkx+03fHPUaKxBihl6DN8LGsSnsT7Wnzu
 aGA8SiJmdZhk8f1C30gGNssBBvOdJeTmc0vQzeKXJA6g4ra3+bmwn+T6OLEEGZlO
 g0pl7BXST9lNLFlSBEG6DcjNL7m1mqCWpaRmWe70zjbFT86KKb/5YISY61fC7Qkf
 AHccunoSXFBM6ttoIubxCInTkhfhKalJyZ2cUPZ6MRxhoE0+ABVOk2lw1oMmF3er
 OOz8Qs9AcZcsC6k+WAxJgMjT8snTc8wRh273Df8drGfTzSgGkuXj0Uimmgmaqsts
 3xPKu+6+UY+HxDt52NOQ4p/eo8yPMgVutfG7ciGynHZSgsklscLXMvUL7EGH67hR
 AfJQFWJ3K+Jk/KeyyGgi1pa2C4BoJ1VmPw1P9oLHRMuuCLrY1B2XzG7nySX81uNG
 2uTbLL236o2oUX3E/yaLN1k2tkreddG1G48HVw/srcIImAxD5Dl1sysRzMQRUWBw
 tN5ZecSuz/JMQj5HaieZ8zL/v9dXzq6Gielee8SAJaO38nbnmxv3DfTHLLEoy3nv
 mS/1OtySzbzI9obMZIsw+bpxDokvb525k89gthxBfWybm6KCRGJO119zc5nZ9r8G
 PX5wvaPi
 =sHZs
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
 "We continue to see a lot of new material. I've highlighted some of it
  below, but there's been more beyond that as well.

  One of the sweeping changes is that many boards have seen their ARM
  Mali GPU devices added to device trees, since the DRM drivers have now
  been merged.

  So, with the caveat that I have surely missed several great
  contributions, here's a collection of the material this time around:

  New SoCs:

   - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)

   - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)

   - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)

  New Boards / platforms:

   - Aspeed BMC support for a number of new server platforms

   - Kontron SMARC SoM (several i.MX6 versions)

   - Novtech's Meerkat96 (i.MX7)

   - ST Micro Avenger96 board

   - Hardkernel ODROID-N2 (Amlogic G12B)

   - Purism Librem5 devkit (i.MX8MQ)

   - Google Cheza (Qualcomm SDM845)

   - Qualcomm Dragonboard 845c (Qualcomm SDM845)

   - Hugsun X99 TV Box (Rockchip RK3399)

   - Khadas Edge/Edge-V/Captain (Rockchip RK3399)

  Updated / expanded boards and platforms:

   - Renesas r7s9210 has a lot of new peripherals added

   - Fixes and polish for Rockchip-based Chromebooks

   - Amlogic G12A has a lot of peripherals added

   - Nvidia Jetson Nano sees various fixes and improvements, and is now
     at feature parity with TX1"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
  ARM: dts: gemini: Set DIR-685 SPI CS as active low
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
  ARM: dts: exynos: Move Mali400 GPU node to "/soc"
  ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
  arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
  arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
  arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
  arm64: dts: rockchip: enable rk3328 watchdog clock
  ARM: dts: rockchip: add display nodes for rk322x
  ARM: dts: rockchip: fix vop iommu-cells on rk322x
  arm64: dts: rockchip: Add support for Hugsun X99 TV Box
  arm64: dts: rockchip: Define values for the IPA governor for rock960
  arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
  arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
  arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
  Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
  ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
  arm64: dts: qcom: sdm845-cheza: add initial cheza dt
  ARM: dts: msm8974-FP2: Add vibration motor
  ...
 2019-07-19 17:19:24 -07:00
Linus Walleij f90b8fda3a ARM: dts: gemini: Set DIR-685 SPI CS as active low 
The SPI to the display on the DIR-685 is active low, we were
just saved by the SPI library enforcing active low on everything
before, so set it as active low to avoid ambiguity.

Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-15 17:33:09 -07:00
Linus Torvalds 17a20acaf1 USB / PHY patches for 5.3-rc1 
Here is the big USB and PHY driver pull request for 5.3-rc1.
 
 Lots of stuff here, all of which has been in linux-next for a while with
 no reported issues.  Nothing is earth-shattering, just constant forward
 progress for more devices supported and cleanups and small fixes:
   - USB gadget driver updates and fixes
   - new USB gadget driver for some hardware, followed by a quick revert
     of those patches as they were not ready to be merged...
   - PHY driver updates
   - Lots of new driver additions and cleanups with a few fixes mixed in.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXjYA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynMYACgnSRP3GylwMywrkc9paVmDeiIgNwAn0N2sika
 JEW7C3lkBJZJ7R6V/Ynm
 =drla
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
 "Here is the big USB and PHY driver pull request for 5.3-rc1.

  Lots of stuff here, all of which has been in linux-next for a while
  with no reported issues. Nothing is earth-shattering, just constant
  forward progress for more devices supported and cleanups and small
  fixes:

   - USB gadget driver updates and fixes

   - new USB gadget driver for some hardware, followed by a quick revert
     of those patches as they were not ready to be merged...

   - PHY driver updates

   - Lots of new driver additions and cleanups with a few fixes mixed
     in"

* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  Revert "usb: gadget: storage: Remove warning message"
  Revert "dt-bindings: add binding for USBSS-DRD controller."
  Revert "usb:gadget Separated decoding functions from dwc3 driver."
  Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
  Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
  Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
  Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
  usb :fsl: Change string format for errata property
  usb: host: Stops USB controller init if PLL fails to lock
  usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
  usb: phy: Workaround for USB erratum-A005728
  usb: fsl: Set USB_EN bit to select ULPI phy
  usb: Handle USB3 remote wakeup for LPM enabled devices correctly
  drivers/usb/typec/tps6598x.c: fix 4CC cmd write
  drivers/usb/typec/tps6598x.c: fix portinfo width
  usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  usb: renesas_usbhs: add a workaround for a race condition of workqueue
  usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
  usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
  USB: gadget: function: fix issue Unneeded variable: "value"
  ...
 2019-07-11 15:40:06 -07:00
Linus Torvalds 4d2fa8b44b Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...
 2019-07-08 20:57:08 -07:00
Olof Johansson 35051f8434 Samsung DTS ARM changes for v5.3, third round 
1. Fix imprecise abort on Exynos4210 caused by newly added Mali nodes,
 2. Reorganize Mali nodes under /soc,
 3. Adjust buck regulators voltages on Arndale Octa and Odroid XU3/XU4
    family to sane values.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl0iMskQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1wlMD/0Wr9gCWjL+f4axGqL9A/54mTwcaGo67Wrm
 iynRK9e3miII8ijQGVf6xkpfXGSCpOcYDcy8cR97G4gLRO1zc/lHO2GJBxPf/ALR
 rvIvrmPqPOe7t/rzruzoiykg4p1C8o4rX0/b6rxsmaSDja0zvEK2J0/E5cmZFy/A
 w+45dr/AuDkKnzhcy+GjuLmkyRcDTwuPPPXtFEBYvSWBwZMvLwAfckpO5q5iQCkR
 eTUwtpwnJa2tp1qDM20VaGcqJd6XeADS6cEX1kM5AQ291ZK5F6XmkhJ1pIyeibwp
 TbBLePAnwUV5/RGYdcVpaKLqESyZ0ctKz5WYMB43TILIgYq0iLq9pxujKGHHTZNX
 zI9t0yZ/wr4ypXe824S9v1g2rSJPGs6WtZETukZL07CjF5d0/ambJ34hFv7cpgXo
 AYZi9haVOb/aFzuXvFtF6nhpuggpDpesrYxo+iXmnDU/WSDOPeCljhOzk1gstyue
 Dt7dJZSWXIZ6i+vY5K7kCUOmpOw4KMaeTH81G+abP/TWaolafnn5tdFalf4+FL+9
 f4DguaY0VQ73dhiaIjWHjnkW1zshZIfiLaG2rQjuam1O+foR24TfVfpMj299m29o
 ahxbN1ynh8o5Ny2ErIqcsprsDEav9fbQijOl9zV/8jMraMI2s+Ny4Z4t5wtEXaxm
 MZf4lsSKhA==
 =4yv0
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-5.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.3, third round

1. Fix imprecise abort on Exynos4210 caused by newly added Mali nodes,
2. Reorganize Mali nodes under /soc,
3. Adjust buck regulators voltages on Arndale Octa and Odroid XU3/XU4
   family to sane values.

* tag 'samsung-dt-5.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
  ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
  ARM: dts: exynos: Move Mali400 GPU node to "/soc"
  ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210

Link: https://lore.kernel.org/r/20190707180115.5562-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-07 13:33:03 -07:00
Olof Johansson 2659dc8d22 This set of patches fixes regressions introduced in v5.2 kernel when DA8xx 
OHCI driver was converted over to use GPIO regulators.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdG3dJAAoJEGFBu2jqvgRNUdEP/06CH3kwX/VLJjyjG8lpm504
 T8Xr1akrvwjUCtdMy2XFvGfP7Mg8cABIKN8eUqbCjusw4E4mCCh1AMnLoXUtZN1M
 LK/MNQ4WznREu4ZNjj/nqAAfKV/mGB2Ym7GToj57p0C6DXXxXE4GKpD2Tlrpxm8g
 cLk7efyCU5j5/MM9fgWVViV5LEf15tR6jRY4M4FRhZUF0CP/MWsAnrsmZuywIfSi
 ihGrYfdkyhAjgYInCQw3ZMNtUD+0Ohf1QmKkzmHhE7UF5FklBLFY6uOPHdwcYqPL
 ymhToPRquYIAU95vuCXHZRSV5HaeM47yn1SegCeNvSLr0QiEI5+31l9QOAku/dbs
 JLlW4hXeLvsayVF3c27K0QztDTEpv+jYDEJQ2sxjkoJkdJsQZc//tWJObw8cfWlV
 b61gM1bcbYOVQX3uFDdznjreKmdk+6oGhzFAeGY05jIHBL/y+afFYw0U6knolJAy
 p9FisEcI8XdAP2CBxc9W+Yy7YM5/H6Lvx5MmFCWfzOYl+InKL1IyIjNuCXmyjLSr
 WBxnM9Dpry2aaZYY6XN5h1wO34jmIduyQGBQO+n2fsgnBuy4J4i1+SEodZcfeFgv
 FZmLxJVGi/CHs2iypDoa3hU8Ny9/hr5ErN8fSai3a5vDNKML8VEpml+IbA6Xbxe1
 l/PRRsxag7uvJOfoQW6f
 =vwpF
 -----END PGP SIGNATURE-----

Merge tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes

This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.

* tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da830-evm: fix GPIO lookup for OHCI
  ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
  ARM: davinci: da830-evm: add missing regulator constraints for OHCI
  + Linux 5.2-rc7

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-02 15:13:20 -07:00
Olof Johansson adfbb80d38 Display support for rk3228/rk3229 (up to hdmi output) and more love 
for rk3288-veyron boards.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl0Z0DEQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgbHRB/40x1DBDesIZnjpbnFPTBGcqhMXgc/tfawK
 jtU7fwFiToyvXXzauY877+njhC54MCwF9JhtRfxn0c5O7WRBCnZnzRIfQpqKxdXD
 VmIx5cKMI057oG0p4RB9tSDTHNAfg0lw9M9DQVw4f/Yl2M0kY/yk3TnL2vReMxMQ
 mGd0j8KDAHnpdBgYpKQPSxQdbV8i5EFkb0RcvrEZ/VPHrikg74y91nbgSjBu3EgI
 +NecSglseOG+SVzPzxbnU1kZ4E7Z/zXq6UQmpoVw2710MNn+QWrd1+F7bAcnszaO
 KJCdHRM8Icpx9mNnekjonzYuNWOAEZf+LFS2FncR6qjrzFgBWi7c
 =8Tz/
 -----END PGP SIGNATURE-----

Merge tag 'v5.3-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Display support for rk3228/rk3229 (up to hdmi output) and more love
for rk3288-veyron boards.

* tag 'v5.3-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add display nodes for rk322x
  ARM: dts: rockchip: fix vop iommu-cells on rk322x
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
  ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
  ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on veyron

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-01 15:15:22 -07:00
Olof Johansson 180ae50952 mvebu fixes for 5.2 (part 2) 
Use the armada-38x-uart compatible strings for Armada XP 98dx3236 SoCs
 in order to not loose character anymore.
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXRYouQAKCRALBhiOFHI7
 1XlVAJ0Qjg4gFXUrf7MUpn8LuUi6UTEf3ACdGLW5ZT78BM78TiEGG79H+WsJ/ow=
 =jxUU
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu into arm/fixes

mvebu fixes for 5.2 (part 2)

Use the armada-38x-uart compatible strings for Armada XP 98dx3236 SoCs
in order to not loose character anymore.

* tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-07-01 15:14:09 -07:00
Krzysztof Kozlowski 841ed60264 ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa 
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78]
voltage regulators values.

1. The voltage tables for configuring their registers mention range of
   voltages: 0.750 V to 3.55 V,
2. The constrains in electrical specifications say output voltage range
   to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V).

Adjust the ranges to match the electrical specifications to stay on the
safe side.  Anyway these regulators stay at default value so this should
not have effect.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-07-01 20:28:37 +02:00
Krzysztof Kozlowski a19a209ee4 ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family 
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78]
voltage regulators values.

1. The voltage tables for configuring their registers mention range of
   voltages: 0.750 V to 3.55 V,
2. The constrains in electrical specifications say output voltage range
   to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V).

Adjust the ranges to match the electrical specifications to stay on the
safe side.  Also change the name of regulators to match reality.  Anyway
these regulators stay at default value so this should not have effect.

Reported-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-07-01 20:28:32 +02:00
Marek Szyprowski 8386e6a7b0 ARM: dts: exynos: Move Mali400 GPU node to "/soc" 
Mali400 GPU hardware module is a standard hardware module integrated to
Exynos3210/4210/4412 SoCs, so it should reside under the "/soc" node.
The only SoC components which are placed in the DT root, are those, which
are a part of CPUs: like ARM architected timers and ARM performance
measurement units.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-07-01 20:27:37 +02:00
Marek Szyprowski 47f28b41df ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 
The PMU module of Mali400 GPU is optional and it looks that it is not
present on Exynos4210, because any access to its registers causes external
abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the
driver will skip the PMU module. This fixes following fault during kernel
boot:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    (lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0)
    (lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8)
    (lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c)
    (platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400)
    (really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8)
    (driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60)
    (device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160)
    (__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4)
    (bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c)
    (bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c)
    (driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430)
    (do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0)
    (kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c)
    (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)

The PMU module seems to work fine on Exynos4412 SoCs, so the patch also
moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi
respectively, to keep only the common part in exynos4.dtsi.

Fixes: 13efd80aca ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-07-01 20:25:57 +02:00
Greg Kroah-Hartman f254e65ad6 usb: changes for v5.3 merge window 
The biggest part here is a set of patches removing unnecesary variables
 from several drivers.
 
 Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap.
 
 Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based
 SoCs.
 
 DWC3 also got support for Intel Elkhart Lake platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCAA7FiEElLzh7wn96CXwjh2IzL64meEamQYFAl0UdeMdHGZlbGlwZS5i
 YWxiaUBsaW51eC5pbnRlbC5jb20ACgkQzL64meEamQbuBxAAqMp9nwVgYu9beeXP
 1xEjfnc/OxA8oMPcbJVPiYseVowbrj5Ue3SK8XcDCeSDfEI09PNOqfpNtLXvjVie
 NxDMj1zj31Ggb0XfoweOZQHXXpq/6tlfqVJ/oXfkxQ92wuSlyKzkoA7ZuCxAy9ay
 p+E+/cSa1E5LGigI/XEyX2C9JuANd9vSM/CaA5Z2XbosThLK9svtHWlNRIPolIGB
 fUBRm3JVi1jLxAMfbu/8Ng05xYGIPnwi8JDcQ8swAdm5nENtuq9Z0eMm8EAxLdvn
 UwArRR14uI4Vgs69IH4R28tmM4MMsuUVnKv3nxOYcoqQ01u9dySiEYsT5x7RETLu
 GH7v4NMdTqTIfN8ECFLUfaE8+tLBx6MjFOBxNHIeu1tc+MrRzb7a7Z00dkpUlMkg
 jaddCfwbAx3CgJ77nDILBYnVRpaEzlKhZWrNkoSCUI1Ty0QlsnInUkhXtUuayi+R
 AjCBc1PBXPOc6FHx5ECQrA0HWBhC0MW23ncdAFxz1eqqJPYhNbPn5zPEaZ8nNvmz
 R1aUlxDi8FDyRvKbjmGoeRrLbiwzcu/9xiLZ13U4H/kPG4+1g+rx3F8ExIvWr1p+
 XrCJCDdYKN+D9KxbO/5ERg38fARsynryXp4Yll4cLR7IWCQZykkVJ+MuLDwejNF1
 itw69proXZUqZ3Voa9C5a1V/gCQ=
 =3HLl
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v5.3 merge window

The biggest part here is a set of patches removing unnecesary variables
from several drivers.

Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap.

Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based
SoCs.

DWC3 also got support for Intel Elkhart Lake platforms.

* tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (30 commits)
  usb: dwc3: remove unused @lock member of dwc3_ep struct
  usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices
  usb: Replace snprintf with scnprintf in gether_get_ifname
  usb: gadget: ether: Fix race between gether_disconnect and rx_submit
  usb: gadget: storage: Remove warning message
  usb: dwc3: gadget: Add support for disabling U1 and U2 entries
  usb: gadget: send usb_gadget as an argument in get_config_params
  doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2
  usb: dwc3: qcom: Use of_clk_get_parent_count()
  usb: dwc3: Fix core validation in probe, move after clocks are enabled
  usb: dwc3: qcom: Improve error handling
  usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
  usb: dwc3: qcom: Add support for booting with ACPI
  soc: qcom: geni: Add support for ACPI
  Revert "usb: dwc2: host: Setting qtd to NULL after freeing it"
  usb: gadget: net2272: remove redundant assignments to pointer 's'
  usb: gadget: Zero ffs_io_data
  USB: omap_udc: Remove unneeded variable
  fotg210-udc: Remove unneeded variable
  usb: gadget: at91_udc: Remove unneeded variable
  ...
 2019-07-01 12:01:33 +02:00
Olof Johansson 61c615ac53 Qualcomm Device Tree Changes for v5.3 
* Add vibrator motor for MSM8974 based Fairphone 2
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdFaWJAAoJEFKiBbHx2RXVn1MP/iZCUC0pYRsVD6yoptpwhOtG
 6O71IPq+oMCeNEQklNF4zRHOn9kGiHgDOL84Ah9jeloG0wCq1t1kxCjiK7EWcSRu
 TpWbIoqVgyn9Rt+J5RNFBJkP3qXOwmQXBev5eWx6oCJ3EXO1Zkp0UkVwLHlA8Uz+
 YHsSbg1TdR2BPs96+TFho4G9udyczQAqGYZOlXAH0IsDks79rfL/QKPEV7Gprpze
 97ich97LwuEmNvG4tae6XHgAzE+AvWO5Q8g5DaRs3hMy64hKHF2Ygn7Kc3fU3qVQ
 G+dHN3k+cOj+yR1ovVGM14EUtcPXalNTxpysZoYpsphsh4c9Mjlped2doIZnVCbM
 yzwNkqNlH/o2rnWof300VD1ezKrZgHNJyqJgKq93rk86bbHG40Ybm5aGrzx0GUYC
 BAsfyswU4sfLRWWLEEIOc6qMzOERDBTm5/AbjhxsDWODQVpJuQMd9/F6FUE4uZHx
 cSEVjFBwE7HBCX0TXcSyQ/bTHQkQRa5CM1ZrCnQkt9kyVmzs1IwjfuHjrLSLlebF
 LXxnph/qvqZHS6icdvmga4APn6r3MYRJCFZmS+as/K4+tOeTL0IdHayHoIUUc4Jc
 S52x2XhNC2yOD2JpqYAelqhjP7gzKx2drN9dVYllJvkVw5BJ+VpDZh+ZtaVGMqZO
 +fmEiAsMz2Xytg+/aRYd
 =W5di
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm Device Tree Changes for v5.3

* Add vibrator motor for MSM8974 based Fairphone 2

* tag 'qcom-dts-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: msm8974-FP2: Add vibration motor

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-27 23:29:06 -07:00
Linus Torvalds fe2da896fd ARM: SoC fixes 
A smaller batch of fixes, nothing that stands out as risky or scary.
 
 Mostly DTS tweaks for a few issues:
  - GPU fixlets for Meson
  - CPU idle fix for LS1028A
  - PWM interrupt fixes for i.MX6UL
 
 Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
 two MAINTAINER tweaks.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0ULP8PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3h3sP/AkPQ+18tw5r6eY01k7a+JtDIbzKUizc6qh5
 /IBOpynFVv28+VRVrmu1xqek+5iJ7pVkQrJO5Nf0ChbFjo6Hqdk/84tivccyozrY
 4eO/7BALoV57g6inDTLWvhYL3V8bwLYT/1XCP4cN1Di9WBqBhZoe+h8BQr3ztrep
 p3QDjs3WDSzsJ8Oy8NBDUFXtWnZznXaSRzXFKGaUEVIpnlV4OHNW5XbXkLFFHygO
 SmoJdJRPIoKki6Gq0GvZH4U/0U53sa927uwT/02DaxIzlPFfhQtyNw8ZCo//6adg
 tyUTJn7zzOTxFSJZ512EJ4OG6MG9T/3wDGPlT+KJ4Bgv19jSeksdnvCfZrtAuPfu
 j1APenXGRNImSDJOeDrxeKAbW29RpxQjYzvMvGT3iYqH93sD/lz6uIoObCcGzwXQ
 BGIvMKOs3luw6Bk3pJpfBmzMPBkrDWerDgL3qdHnQEYenmbeTCyKFQVOM7f+PQqg
 jKT7gitFq1bT4JXImcInEdY/2nFlBJUgdIwwK273uS0RmeOHmF8TNJpKeaYbO7ds
 fcG177RaLqPoIfx6GbT7kZRVSgBHJrUh6gRmuQcoJaaP4zXdX0+N3S1WYQkGMkos
 t0SU9YPsqDyCpmtCN7TTY5MwhR/jTGLmxArCGBf1+IrfFx1cdmaFPjnJvEI8fCJM
 CJRPfzKQ
 =Jr9u
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
 2019-06-28 08:37:04 +08:00
Joshua Scott 8003136174 ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node 
Switch to the "marvell,armada-38x-uart" driver variant to empty
the UART buffer before writing to the UART_LCR register.

Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>.
Cc: stable@vger.kernel.org
Fixes: 43e28ba877 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
 2019-06-27 17:34:38 +02:00
Justin Swartz 519574e325 ARM: dts: rockchip: add display nodes for rk322x 
Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
a few hdmi pinctrl entries to allow for HDMI output.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[added assigned-clock settings for hdmiphy output]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2019-06-27 11:57:20 +02:00
Justin Swartz 836e2abff0 ARM: dts: rockchip: fix vop iommu-cells on rk322x 
iommu-cells obviously needs to start with a "#".

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2019-06-27 11:57:08 +02:00
Olof Johansson 9aa7ae4330 Samsung DTS ARM changes for v5.3, second round 
1. Add camera flash to Galaxy S3 boards,
 2. Fix PMU affinity interrupt warning on Exynos4,
 3. Improve regulator configuration on Odroid XU3/XU4/HC1 family and
    Arndale Octa by disabling unneeded regulators and adding suspend
    configuration.  The suspend configuration brings significant reduce of
    energy usage in Suspend to RAM (e.g. 120 -> ~7 mA on Odroid HC1).
 4. Add Mali nodes to Exynos3 and Exynos4.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl0SdgQQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD11tPEACbB82Sh9TMuCVDRsgVup2mjbE/3uZyD0/J
 7kiOSrQdK82OEwE/hZ5GrSTbIhIts2wsVRWJHpyTB9DCXJpFi5C8Gjm70BaxP7nu
 wrTnlbdccwEngs1MQHo4HxUJLarVY6iRd+OiuoyB1Peb4DEQ57JEPGSXRD0XlbY6
 vC48/KDT3maTX8IAEfwO2uHvY+G3c/VdmktR+VEBYfrzYLmaPzDMAv6m4wIpYrGn
 aEERUoaEsZnSFd4Laipq0Y3YP4RXOAOpYiJgREIesblcXdgSALtF39N9qf1brFYR
 lxoeT2cOU58F3EnAGKL5m0N5qbbPKxpi+xwbEwMxpiZa0CSn68js/3+PyByc89tJ
 ANTi8GCuZ0sNR7ZdecvlvUXNW0mdN7Ia3N4h7CjueeT89cm1hE6Mhz/xfFeF4MIf
 I+m0Mr3c7K/tJqlEmLaeMh3pVO8DAqqQboCeNLvgev8MkVZV5iQyPJ8vOA2CtX+c
 nKmYukykJ658KVstYSUMUrRJH4liOo3X1rHpbfSAiRZVQOExpFZEPI/NORroTZn7
 Vqrm7haiP1FhHACvUA7OGkgV4696mdZrnjJ6qftMSCuZFKpKDnjohrHBmVThN0ue
 /hjZQCcJFZJgJ8ezUB7suyBbcndM2H2omAWdnQ8R2yVMJRzIuScBNvCIAraOyAgq
 RLgKMsR+Dg==
 =ZMHl
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-5.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.3, second round

1. Add camera flash to Galaxy S3 boards,
2. Fix PMU affinity interrupt warning on Exynos4,
3. Improve regulator configuration on Odroid XU3/XU4/HC1 family and
   Arndale Octa by disabling unneeded regulators and adding suspend
   configuration.  The suspend configuration brings significant reduce of
   energy usage in Suspend to RAM (e.g. 120 -> ~7 mA on Odroid HC1).
4. Add Mali nodes to Exynos3 and Exynos4.

* tag 'samsung-dt-5.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
  ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
  dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
  ARM: dts: exynos: Use proper regulator for eMMC memory on Arndale Octa
  ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family
  ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa board
  ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 board
  ARM: dts: exynos: Fix language typo and indentation
  ARM: dts: exynos: Add PMU interrupt affinity to Exynos4 boards
  ARM: dts: exynos: Add flash support to Galaxy S3 boards

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-26 19:23:08 -07:00
Olof Johansson 2bfd84b3a5 UniPhier ARM SoC DT updates for v5.3 
- Migrate to the new binding for the Denali NAND controller
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl0SOlAeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGYr8P+gM/RghlOZf93sDT
 2C0rgzly2ZdwB9aZMAqYjxl+YIujWSuws/W+p/Kvl5xKJLHVkrWZ2x8AZkrAuaQK
 q3yV0HGRQUnuzIMU+nrK8Regwf4L1oOOB+qXVJPS3ZG/9K0lBumUq3rM0FlEh9pu
 UCVhvPa85u5dICH1PxQRW8oXSaVdAFil8FJpKu8lvdJt/qJkgR2bYwO88Y3lBTzD
 K3+B+ywmsGAKY6rl6iVs1tJNAotGAffsF55ULnepG+y2eFnJ2tzCYJe56E1SqIvo
 VWmOTz0c2pM5jPSq6lz89ao5nTed2yaIrlx39PnROykXZ/hOhMilFudayMj8+v/e
 rjWFNQRPEkFdpDxHJtIXtzvWgAOAdZ/Dkc6TDUGG3F8c1s4VjHvVx2Gxvnq+KkPT
 fn5JqB0JqMDAX97jEmsUqGfB6k2PMSjZvhCPt6GnqpbibayzhccPL7DZUbqSf3UG
 74ugMoliZFhwUcKHnAehALuSOiWA87amZ+ycg1ji6fPsr8XI1vNvR/WeJHl+3Zzf
 la7IvVn0TxefWugkmntnYQlRETB8wx9fv8hyFWi+f4f6m+XceemBedGcNNEorHL4
 cIV5z6lCNN3kQbslJedcwn3XHb1u4Na0GL7htH9ryi156/XG6lFjT1VifAhT6jlX
 RMovjZFNsjxUKCa0QO3zgDwVOkp+
 =Ezcw
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-dt-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt

UniPhier ARM SoC DT updates for v5.3

- Migrate to the new binding for the Denali NAND controller

* tag 'uniphier-dt-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: update to new Denali NAND binding

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-26 19:20:30 -07:00
Matthias Kaehlcke fe32553c87 Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" 
This reverts commit 288ceb85b5.

The commit assumes that the minnie panel is a AUO B101EAN01.1 (LVDS
interface), however it is a AUO B101EAN01.8 (eDP interface). The eDP
panel doesn't need the 200 ms delay.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2019-06-27 00:01:22 +02:00
Douglas Anderson 4db11c378a ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron 
This is the other half of the hacky solution from commit f497ab6b4b
("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on
veyron").  Specifically the LPM driver that the Broadcom Bluetooth
expects to have (but is missing in mainline) has two halves of the
equation: BT_HOST_WAKE and BT_DEV_WAKE.  The BT_HOST_WAKE (which was
handled in the previous commit) is the one that lets the Bluetooth
wake the system up.  The BT_DEV_WAKE (this patch) tells the Bluetooth
that it's OK to go into a low power mode.  That means we were burning
a bit of extra power in S3 without this patch.  Measurements are a bit
noisy, but it appears to be a few mA worth of difference.

NOTE: Though these pins don't do much on systems with Marvell
Bluetooth, downstream kernels set it on all veyron boards so we'll do
the same.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2019-06-26 23:58:55 +02:00
Luca Weiss e914633951 ARM: dts: msm8974-FP2: Add vibration motor 
Add a node describing the vibration motor on the Fairphone 2.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Andy Gross <agross@kernel.org>
 2019-06-25 13:29:32 -05:00
Masahiro Yamada bc8841f0c1 ARM: dts: uniphier: update to new Denali NAND binding 
With commit d8e8fd0ebf ("mtd: rawnand: denali: decouple controller
and NAND chips"), the Denali NAND controller driver migrated to the
new controller/chip representation.

Update DT for it.

In the new binding, the number of connected chips are described in
DT instead of run-time probed.

I added just one chip to the reference boards, where we do not know
if the on-board NAND device is a single chip or multiple chips.
If we added too many chips into DT, it would end up with the timeout
error in nand_scan_ident().

I changed all the pinctrl properties to use the single CS.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 2019-06-26 00:06:50 +09:00
Olof Johansson 09253fccca i.MX arm32 DT changes for 5.3: 
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
    Meerkat96 board, and NXP LS1021A-TSN board.
  - A series from Andrey Smirnov to update vf610-zii-dev and
    imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
    adding QSPI device, and dropping unused pinmux.
  - Update imx6sl and imx6qdl device tree to assign corresponding clocks
    instead of dummy clock.
  - Update i.MX6/7 boards from NXP to assign corresponding power supply
    for LDOs.
  - Update i.MX6/7 device trees to enable SNVS poweroff key support
    according to board design.
  - Update coresight DT binding for i.MX7 according to consolidations
    for CoreSight replicator and funnel.
  - A series from Marek Vasut to update M53Menlo board on various devices
    like UART, USB, ethernet PHY, GPIOs etc.
  - Enable USBOTG support for imx7ulp and evk board.
  - A series from Peter Robinson to update imx6sx-udoo board, switching
    to SPDX License Identifier, enabling I2C devices and bluetooth
    support.
  - Add video capture support for i.MX53 and imx53-smd board.
  - Add PXP device for i.MX6UL.
  - Other random small updates on various boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEbs9AAoJEFBXWFqHsHzOkIoIAKBS9jB7Lp6DSGpYIgwdjBmK
 PY0ogud8FZEfHFdDi9WGt3d1KFkr0xBJPvJ1Tn48BdpN/k3TMrFs1sj/PRNlIRe5
 llnBpCD5oV7SHAdIkFcGIQeWwHMfnpxe1NdhMiCpT6pKtk2oieRWVs0RvdZ5UgRI
 aULSFbxs/ZEjvVa3Jcx7KjFmceCHP8naICtYm7ZYjn3vDI7y1ZosaD9pWFSL3N/k
 l/F3B05Zh6HA4HpldGxCbxSVr94GE9HgLXGigo/nEGjiHmhecc2rievsegJP9AKa
 z1bTtIK+qrsYmUtXWGPgNTXLpVfjRf+0Q6z60uVDhsfuNJx2IVJkyBeAebXCSMk=
 =pBgY
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm32 DT changes for 5.3:
 - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
   Meerkat96 board, and NXP LS1021A-TSN board.
 - A series from Andrey Smirnov to update vf610-zii-dev and
   imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
   adding QSPI device, and dropping unused pinmux.
 - Update imx6sl and imx6qdl device tree to assign corresponding clocks
   instead of dummy clock.
 - Update i.MX6/7 boards from NXP to assign corresponding power supply
   for LDOs.
 - Update i.MX6/7 device trees to enable SNVS poweroff key support
   according to board design.
 - Update coresight DT binding for i.MX7 according to consolidations
   for CoreSight replicator and funnel.
 - A series from Marek Vasut to update M53Menlo board on various devices
   like UART, USB, ethernet PHY, GPIOs etc.
 - Enable USBOTG support for imx7ulp and evk board.
 - A series from Peter Robinson to update imx6sx-udoo board, switching
   to SPDX License Identifier, enabling I2C devices and bluetooth
   support.
 - Add video capture support for i.MX53 and imx53-smd board.
 - Add PXP device for i.MX6UL.
 - Other random small updates on various boards.

* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
  ARM: dts: imx7ulp-evk: enable USBOTG1 support
  ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
  ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
  ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
  ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
  ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
  ARM: dts: Add support for 96Boards Meerkat96 board
  ARM: dts: imx6ul: Add PXP node
  ARM: dts: imx6sll: Enable SNVS poweroff according to board design
  ARM: dts: imx7s: Enable SNVS power key according to board design
  ARM: dts: imx6sll: Enable SNVS power key according to board design
  ARM: dts: imx6ul: Enable SNVS power key according to board design
  ARM: dts: imx6sx: Enable SNVS power key according to board design
  ARM: dts: imx6qdl: Enable SNVS power key according to board design
  ARM: dts: imx53: Bind CPLD on M53Menlo
  ARM: dts: Introduce the NXP LS1021A-TSN board
  ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
  ARM: dts: imx7d: Update cpufreq OPP table
  ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
  ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:52:17 -07:00
Olof Johansson 276610709d This is the pxa devicetree changes for 5.3 cycle : 
- devicetree pinmux support for bias on pxa3xx
  - devicetree pinmux bias usage for raumfeld
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEExgkueSa0u8n4Ls+HA/Z63R24yxIFAl0QmYwXHHJvYmVydC5q
 YXJ6bWlrQGZyZWUuZnIACgkQA/Z63R24yxIe+w/+I0IPxGYZk+N+3n8Fc5d5kYBD
 0ppzLj2lN5FI3vRBeIZQFLhncqF4COQFtPu2v0/+eCF0P7b8s3Be6mfH1pBJr7tT
 lwDUZBBiGAYOTo+oH87opvtQFFi/sD4PhPQfYcNrFkHlob7UeuTAc9wHFWr512dW
 8Snf2bJRIsWAv7U79qdx90pLH4HGsWUnOU309nAOneWEZQ9Q2EyHsZatgu6AyFTN
 fMedFb7KTUK8hcoru576Bh68cddFxUHFGhsQLmdET5Z97yu+ZrRfvYYJ/Kqm7ZhC
 wbQo0JZVXitdUmKD78MiOBmRCJQPWBdoRm65LIPqnumO0H35mTln72SXQ/VdpwQO
 Sw4ujshfGuZDjNgVZkNT/oomCYgT3Ryq5gkK4iZXRjUnm4oNMmUmTulq74W8dlDj
 /4iFhndvA2fNLAA5FMLuuG+dXOxLvNV0zejZUfK9Omu76eYOkvgFlzwkG9rgbYST
 7Eax4aJpqV6XD7BxmUnldgKn4xcO9i7XgjkOy33JX3HDr2RFQyVuTkWPMbQaXdiL
 cEEt8ZFg1iNPzgoo810VLlJD1RNXfs2XlQkFrHh7L8l4kuUdTu9dA912BFekbjui
 AEDW4ERVqHbp7izOeRPo0nRuBU9mCeqJk13meDC8ppjk+AsHtTT/2BvnCih5SLJh
 2iBpzkFz4ZvJUoP7R40=
 =IzUY
 -----END PGP SIGNATURE-----

Merge tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux into arm/dt

This is the pxa devicetree changes for 5.3 cycle :
 - devicetree pinmux support for bias on pxa3xx
 - devicetree pinmux bias usage for raumfeld

* tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320
  ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node
  ARM: pxa: raumfeld-controller: add pinctrl for charger pins
  ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key
  ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down}

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:50:23 -07:00
Olof Johansson 28705661dd AT91 DT for 5.3 
- switch to new sckc bindings
  - convert soc bindings to json-schema
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl0NPGIACgkQ2wIijOdR
 NOVOVw/+PFUFDqq2olVAqH2J0OBBZ6kiC/+dboTUUZtkOMjHww6YlUa4NsB+dd9l
 fpKvP8QeY9Y108OcMa1UKSZhRPr1xtay54L/zXyZ4LtVwj/BKg65v72XU+gV5i6t
 16+FBwgRTo/0m4Pl9+o8wg1YSEVIitUCz4P48muCSZtyh0e7V5iyhzjx8n1bG++y
 VtjS9w5BhRGCVCVNhJA5TLGjzXJADlCstvU48O4MvUQ/CPRPfI7spFZJ0FD6ry+f
 kK4kJcj8XFaiZQH9yW7cZbJIepkMdB5vPEXv5RDceDzMYIxcD41to0XAeHU4OhEv
 MaollJyzt7BXYukPmZCUqIL9hQI22dl4gk7APO7NSlbkjmqlEHfvM+AJ9UN5/s8Z
 Cdw+Q2G1vH5WCK0KacRDhn+lgFtD9gB5nHumEajZygPRIx9SdryRHr7xdqixlrtX
 HbRSTg/ZZA4VRvZcn0z4mhjdVzzNaFxhjXDWvu92Mh7cKmCOZhzHgiUJsK2kaKt6
 0FHnQgY5NjXORgH3PKDwhiTOsrF7gPnAusk1jQNGyRd7BzwxP6qpqq2/DZCu1oU1
 G4Ie7XeN6ePuZhs2IdApxaxbR/34MKvISem0OxGE8nDq2WPzQ1Ht2N9gr5jed1Oc
 qf+52z9lvW9RB+V8pG+ry3wu1zzinRY3NxF8WS3TCp2V6F7xQG8=
 =aj7b
 -----END PGP SIGNATURE-----

Merge tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT for 5.3

 - switch to new sckc bindings
 - convert soc bindings to json-schema

* tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  dt-bindings: arm: Convert Atmel board/soc bindings to json-schema
  ARM: dts: at91: sama5d3: switch to new sckc bindings
  ARM: dts: at91: at91sam9rl: switch to new sckc bindings
  ARM: dts: at91: at91sam9g45: switch to new sckc bindings
  ARM: dts: at91: at91sam9x5: switch to new sckc bindings
  ARM: dts: at91sam9261ek: remove unused chosen nodes

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:49:42 -07:00
Olof Johansson b9569a3cc3 STM32 DT updates for v5.3, round 1 
Highlights:
 ----------
 
 MPU part:
  -Add stm32mp157a-avenger board support:
   This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
   , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
   2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
   10/100/1000, WiFi 5 GHz & 2.4GHz, ...
  -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
   it.
  -Add I2S and SAI support on stm32mp157c.
  -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
   (EV1 and DK2 inherit of it).
  -Add camera support:
   -Add DCMI support on stm32mp157c SOC
   -Enabled OV5640 camera support on stm32mp157c-ev1 board
  -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
   board.
 
 MCU part:
  -Add STMFX support en stm32746g-eval and enable connections on it:
   leds and joystick
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCgA2FiEEctl9+nxzUSUqdELdf5rJavIecIUFAl0M6c8YHGFsZXhhbmRy
 ZS50b3JndWVAc3QuY29tAAoJEH+ayWryHnCFRfgP/i5BxDdRTYvDKY+DCNDZm/yf
 Cs4t8Ta25ilAKlCEEig2ZrsROcymwa875AJL+V/HSpY35hQHk6vXaA3iB2lE3VuA
 RDXnQ17d3ZQ5m6DDt7nsjL2gwfE+XKZKPxBAOLDJxAF5aNhDx85V19cDnvuZDtdl
 CJk9wAXdwX3BI8VtFFMPUpedFTGgCtccYKVN1U1zYB+GlvyMbm3NZiikJGB6u699
 2tg6h2IUf6k569VnrNiNkIVxVuKQdJfOUzuDiVmsq0vItjvRcmXmHO/kdYAkT2ml
 lsifua1Ef/udL/eF2G8NAuWVSLaEc4XRJ9kxv93fXsTYrotMxxl0raZkmXATIzmr
 qR10vtbFJCw9LkJjlTQf/kNLGmWl+aMUL7XbOhTBe8Hjn9mMX5v2Ve6TFn03301O
 UH9lmUXApYAyPKbfnskz8pi8agkfMGW8Y4Ce921BnZ/x7LTelFcUzaymBVX1q+cW
 lTQYKs+jVA8opfKmbPiCzY4AUpjHUkytwqVx1TXLF2oBxTle2BHGlJiSSozrtK9i
 zqXb5zyDGj/5Cd6phowMTKZzlIf8MTda33szzS85k6H/t+vnrFBUm6xi4P/ey7Pq
 5Vj4oC9ARVNjMFgNnUu25AeD6KB5JVjqtKEtQHku7gP9Vjfuitl5/6vVLN14e9G1
 /aJRieeJZZPbZVpjyIrV
 =3ZUA
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.3, round 1

Highlights:
----------

MPU part:
 -Add stm32mp157a-avenger board support:
  This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
  , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
  2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
  10/100/1000, WiFi 5 GHz & 2.4GHz, ...
 -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
  it.
 -Add I2S and SAI support on stm32mp157c.
 -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
  (EV1 and DK2 inherit of it).
 -Add camera support:
  -Add DCMI support on stm32mp157c SOC
  -Enabled OV5640 camera support on stm32mp157c-ev1 board
 -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
  board.

MCU part:
 -Add STMFX support en stm32746g-eval and enable connections on it:
  leds and joystick

* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
  ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
  ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
  dt-bindings: arm: stm32: Document Avenger96 devicetree binding
  dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
  ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
  ARM: dts: stm32: add sai id registers to stm32mp157c
  ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board
  ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
  ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
  ARM: dts: stm32: add DCMI pins to stm32mp157c
  ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
  ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
  ARM: dts: stm32: add i2s pins muxing on stm32mp157
  ARM: dts: stm32: add i2s support on stm32mp157c
  ARM: dts: stm32: add sai pins muxing on stm32mp157
  ARM: dts: stm32: add sai support on stm32mp157c
  ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:47:55 -07:00
Olof Johansson 2545de859c mvebu dt for 5.3 (part 1) 
Add LCD support on Netgear RN104
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQyyfAAKCRALBhiOFHI7
 1ZPaAJ9AaFGTVnIuqe8EjZLOiKdO03oWMgCgm8Eu0d9566U2ibYCHCbHN0FbUpU=
 =F0cP
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt for 5.3 (part 1)

Add LCD support on Netgear RN104

* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:46:25 -07:00
Olof Johansson cd75dd0058 Renesas ARM Based SoC DT Updates for v5.3 
* Renesas SoC based boards
   - Use ip=on for bootargs
 
 * Renesas R-Car Gen 2 SOC based boards
   - Configure PMIC IRQ pinmux
 
 * R-Car V2H (r8a7792) SoC
   - Describe CMT devices in DT
 
 * RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and
   RZ/G1N (r8a7744) based boards:
   - Correct SDHI2 VccQ regulator to fix SDR50 mode
 
 * RZ/A2M (r7s9210) based rza2mevb EVB
   RZ/A1H (r7s72100) based rskrza1 board
   - Describe input switch in DT
 
 * RZ/A2M (r7s9210) based rza2mevb EVB
   - Sort nodes to ease future maintenance
   - Add USB host, Ethernet and SDHI support
 
 * RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs
   - Describe IRQC device in DT
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MjzsACgkQ189kaWo3
 T75Niw/7BT5V9o55jLYBlMAzjLoFnZOm/LRW1Xxks4WbOcePsZsDFbg6NbsdbdrB
 gfs5O8F5qq9Owc0nfNlnifKZ2dPVX2h2TXx8LEEF1tNxhqR3ueZCQXToGwnVFLNS
 80pZAtilMnpR60eXBwHjpmhJb8gq94dmNgDaDcesi4RrStmIpKkkGqSJnTRE8CD2
 Gqx7UJ+XLvVWf9sldUIxGCV6wcwMh+Fv0dhBe+MObRcB+45zDfjgW3f32XWFAGwj
 h4An0Ka5fg9C/A39yKWcQtcSDEyVdHk09zm2mQYOds6xOxtgfpQwkyw+4YnW2dGf
 cNYok49+QUtj4IvbJCQevr9gm4lG8XlBU8dIqc3en1WWEbHHj8fXzbYBsKMqcB10
 htJhJpk6ea3uYuOPBWHRae2EQvJnagz4gijmzjf18IGXh5LtEVzNPZWwY/qplk7C
 PkBKa7cYUcrp25cNRSgJXCGakn6HSjujnVZB+HX6GVklrrc2LyuSkplwIZKA9xyd
 XFm2lytYUksjTRKnHTIK+9lfKG111FFsf070YEvgMK3yn40ty0ru6MDNey3mbpMf
 TWCAeuSzn6Cqj9+XmXSx8dMdHyXxieRtZGo36oKOMdWP6dlWl4cyRWRHr7Lpf7fU
 XFy0Jbm0Pyc4HBesvdWjwwfOMljtYfGH8JQU+IwC+jq+5Y/8XmU=
 =xc7g
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.3

* Renesas SoC based boards
  - Use ip=on for bootargs

* Renesas R-Car Gen 2 SOC based boards
  - Configure PMIC IRQ pinmux

* R-Car V2H (r8a7792) SoC
  - Describe CMT devices in DT

* RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and
  RZ/G1N (r8a7744) based boards:
  - Correct SDHI2 VccQ regulator to fix SDR50 mode

* RZ/A2M (r7s9210) based rza2mevb EVB
  RZ/A1H (r7s72100) based rskrza1 board
  - Describe input switch in DT

* RZ/A2M (r7s9210) based rza2mevb EVB
  - Sort nodes to ease future maintenance
  - Add USB host, Ethernet and SDHI support

* RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs
  - Describe IRQC device in DT

* tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792
  ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator
  ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor
  ARM: dts: rza2mevb: Add input switch
  ARM: dts: r7s9210: Add IRQC device node
  ARM: dts: rza2mevb: sort nodes of rza2mevb board
  ARM: dts: renesas: Use ip=on for bootargs
  ARM: dts: rza2mevb: Add USB Host support
  ARM: dts: r7s9210: Add USB Device support
  ARM: dts: r7s9210: Add USB Host support
  ARM: dts: rskrza1: Add input switches
  ARM: dts: r7s72100: Add IRQC device node
  ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  ARM: dts: rza2mevb: Add 48MHz USB clock
  ARM: dts: r7s9210: Add USB clock
  ARM: dts: rza2mevb: add ethernet aliases
  ARM: dts: rza2mevb: Add SDHI support
  ARM: dts: rza2mevb: Add Ethernet support
  ARM: dts: r7s9210: Add SDHI support
  ARM: dts: r7s9210: Add RIIC support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:44:18 -07:00
Olof Johansson 8fbf1bb715 This time we only have a single patch for our command branch between 
arm and arm64, a fix for the array syntax raised by our DT schemas.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
 xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
 PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
 =4UQl
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.

* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:42:05 -07:00
Olof Johansson d12a73cf3a Our usual bunch of patches: 
- Some work on the BPi M2-Berry to support various devices
   - Convert some bindings to a schema, and a lot of fixes reported by
     the schemas we introduced.
   - A few other fixes here and there
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQTgAKCRDj7w1vZxhR
 xYkmAQDT7s1MRH9OEFQpS80BcWCvQoj0drr1ghHdXwwEbfuBUgEAoIuLrfH1Vjyi
 ZcEJwPGowLmSEZezVWSLqTL76iajJg4=
 =PAul
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches:
  - Some work on the BPi M2-Berry to support various devices
  - Convert some bindings to a schema, and a lot of fixes reported by
    the schemas we introduced.
  - A few other fixes here and there

* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
  dt-bindings: pwm: Convert Allwinner PWM to a schema
  ARM: dts: sun8i: r40: Change the RTC compatible
  ARM: dts: sun8i: v3s: Add external crystals accuracy
  ARM: dts: sun8i: v3s: Fix the RTC node
  ARM: dts: sun6i: Add external crystals accuracy
  ARM: dts: sun6i: Fix RTC node
  ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
  ARM: dts: gr8-evb: Fix RTC vendor
  ARM: dts: sun7i: icnova-swac: Fix the model vendor
  ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
  ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
  ARM: dts: sun6i: Add default address and size cells for SPI
  ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
  dt-bindings: bus: Convert Allwinner RSB to a schema
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:40:52 -07:00
Olof Johansson 266050d80e ARM: dts: Amlogic updates for v5.3 
- SPDX updates
 - switch to generic ethernet PHY reset bindings
 - add the canvas module
 - mxiii-plus board: add regulators
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0L89UACgkQWTcYmtP7
 xmUu1A/6A5mbkoyYCxMoSeXpW7mQlI3BeV7MI2uIrtv//t9HvVhUSJfiMfHweb8l
 zwif2QT58nzBuleaAFxEmabveVc16UNkhOyKcaQ4TReotndLhv2y30L+YhEgbV7X
 BWbWMMt+1cJujngsUXgvTrvCyyltAVAZ/QKIkShqVeX3Bg8XzmOeVh2hxaAmUuQ+
 EBZoubt/COUiZGAof6VYmLzxG+X1eFf5TCUcTolzFXeII1RS1w45UqbGztrUgn6L
 IFmkiuTwMgIhM9do2TpJlXYyjio8XT5q/G/6xrxYi9Wrwad0v+NjGv0Lgkej0kq8
 1d9iHIG/asZc3UO3zDQ1kzxs8dI5I+MQUP3iopKbrnqFqJ7xkubCfiU4Ze+3JQTz
 lxalw3HIaiNdpxu7mBQqBAWR2J7Ba2srLTwckhqXiceJs9l9Wsijsv/ajHiHUrnI
 oNph5gfPiUD3KYUp/HPBQZOvZUqNYQLMV89FpDclJ/9aju2QslRQFq+ugNwZ4A14
 2H6C/DAHEQkr996itGKWI2/3sMP2tNOi1UuTeJmfeeFPqxK7ADkM55T9LsXKHWol
 e+9Msp2JwvYiOsLXCurfJ0LdGe5K5SwVUSZ6d4KgtOibUti5VgEsE3khZRu/CQzi
 PA6iW3q75I5sFs1LjcVJCT09ZsWju+qdEmgLhElGJMJZS4QqDPA=
 =kjgH
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.3
- SPDX updates
- switch to generic ethernet PHY reset bindings
- add the canvas module
- mxiii-plus board: add regulators

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: switch to the generic Ethernet PHY reset bindings
  ARM: dts: meson8b: update with SPDX Licence identifier
  ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier
  ARM: dts: meson8b-mxq: update with SPDX Licence identifier
  ARM: dts: meson8: update with SPDX Licence identifier
  ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier
  ARM: dts: meson6: update with SPDX Licence identifier
  ARM: dts: meson6-atv1200: update with SPDX Licence identifier
  ARM: dts: meson: update with SPDX Licence identifier
  ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805
  ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU
  ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator
  ARM: dts: meson8b: add the canvas module
  ARM: dts: meson8m2: update the offset of the canvas module
  ARM: dts: meson8: add the canvas module

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:38:23 -07:00
Olof Johansson 19339e6a22 This pull request adds CPUFreq support for DA850 boards in device-tree 
boot using the generic CPUFREQ_DT driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdC0qMAAoJEGFBu2jqvgRNSxMQAJHdPnwb6v4UOQBagv5T8mbz
 GbIwiQeIoc5/+z9zZ5+8Avrrbz32nLi/PE5Y3i+0sGxcGTTwbb2G7z43GloPlMHl
 YGyIfqzxuv4gM7FKaeWlSz7yNTrfWCaj5yTeLNQClYmV06sqXEDAL1OMn12BVAs4
 MGaie45nf5WJda2FcXQyhuGMTs0WHoghxh2ajU19aVZGWOf3SEqej7Ot9FhwqXtT
 wuZ6X52JDLaAHKv0n/zFvF/YxyUxvFm6swPZ+Bq+6GBlxYxlTIruMwShLjUWh/J1
 18ZuIgUG0Y1Tud3h44xnW3hWMY/jN4Pv+JmLdtJe8jO0l7taotxzHE2hck2FmnXV
 5NFwlwqzODAmpAL2Jm/LpGQDc40XPg4IDdWvIk7tseiuoO1z1zswWnvmNu707+Ml
 8kXjmk3X59Ms8rflc3rUr24no+K7vbiUEbJcPjr+EpB5KcKpLS7LHNhZRs1J4ilA
 TbfHMkbjHdO0wKUg+/sWdBRrLXR41uTsmpfkgvTNvOtdHq1AtgW3Jv2vHfQSyFXb
 cmN6SQIk8von0vjbIkdyWXSmOZln8ZpPpJO8cxXqzRqoopV/R4mxThEQ5uTfypNl
 +8Vp9p4zC0X6hdaXvgOQNdL3igFWcRXk8KEZOT5ddibWuXlXM6Siuy75tG4Y33j5
 N04CB4BniX37bBPPFtVi
 =AF9Z
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

This pull request adds CPUFreq support for DA850 boards in device-tree
boot using the generic CPUFREQ_DT driver.

* tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: Enable CPUFREQ_DT
  ARM: dts: da850-evm: enable cpufreq
  ARM: dts: da850-lcdk: enable cpufreq
  ARM: dts: da850-lego-ev3: enable cpufreq
  ARM: dts: da850: add cpu node and operating points to DT

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:37:18 -07:00
Olof Johansson 97dd7871d1 ASPEED device tree updates for 5.3 
We have various device tree updates from the OpenBMC project to enable
 bits and pieces in existing systems, notably updates to Google's Zaius.
 
 There are some AST2500 machines under development:
 
   * Lenovo Hr630
   * IBM Swift
   * Facebook YAMP
 
 And some AST2400 machines that have been around but out of tree and have
 now joined the party:
 
   * YADRO VESNIN
   * Microsoft Olympus
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0LMRUACgkQa3ZZB4FH
 cJ65LBAAhtpaea/EsgjmRuEV22mrzY3YmDXL4uVahpoNftGdlrgPzBTSDXcxKbMI
 QiTuY2aCJLKLWHod/qpM//2kB0Y8EGLDT94ji6aglOy35+41PCPzAQ12SyPZ/hUx
 IofC8g0bqPkQiaUq9QRnQE9ns9jOr0nEArEBt/R0clgdOhgMl0NCrbI6rc7XBLfN
 L1tMUxhVMfn71nyE4Q1nkMEMdLsxHIRl12sg2pboTVtoes+LBj+ZQ/7AEXkYjxaL
 DSmLVwQwVES3+8rgcSxdtR/pB/H4SLZXst2tlf8I4AVafVUAHkZG7dsFUKnIC2qM
 q2cn0IlAnVshwtbdYWZ6w1kWQSZEuasRdhQCUjCedMDkT52NQTOaeVclpe2wjPk4
 F9WrPUFAkefxvD3MAog2WO8ORYs/cRyysIt+LxU+sv14qToTxcgrUwxLn/S6R7b9
 qK+vmMxxu2B/VLfemcFHvlg19thU2GaDiHf427fXat1vqGDEADzTVyYNFaN5RbB+
 hBg1OLm+vfki9uQ++bYuek4zYvgubSflxy+BwAtA0Xi34ayfPYCUiX/ntVHwHK1j
 p/oewNu+23GxV5XohkTsVPIJnnhrktw2MzPoFQEL4Fqv5QeumdlQyBpvG9EYu88C
 D5cUfCzTR5uX5/cz5R8Jaa5De9qbf5fLK9HGyLgkSjzpHruLX3o=
 =Hwcm
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.3

We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.

There are some AST2500 machines under development:

  * Lenovo Hr630
  * IBM Swift
  * Facebook YAMP

And some AST2400 machines that have been around but out of tree and have
now joined the party:

  * YADRO VESNIN
  * Microsoft Olympus

* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
  ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
  ARM: dts: aspeed: Add YADRO VESNIN BMC
  ARM: dts: aspeed: Add Microsoft Olympus BMC
  ARM: dts: aspeed: Adding Lenovo Hr630 BMC
  ARM: dts: aspeed: Add Facebook YAMP BMC
  ARM: dts: aspeed: swift: Add pca9539 devices
  ARM: dts: aspeed: Add Swift BMC machine
  ARM: dts: aspeed: cmm: enable ehci host controllers
  ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
  ARM: dts: aspeed: zaius: update 12V brick I2C address
  ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
  ARM: dts: aspeed: quanta-q71: Enable p2a node
  ARM: dts: aspeed: Add aspeed-p2a-ctrl node
  ARM: dts: aspeed: Add Power9 and Power9 CFAM description
  ARM: dts: aspeed: Rename flash-controller nodes

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:35:02 -07:00
Olof Johansson 791c6fdb0b Qualcomm Device Tree Changes for v5.3 
* Add display support to MSM8974
 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead
 * Update coresight bindings for MSM8974 and APQ8064
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCeMbAAoJEFKiBbHx2RXV8ikQAKrkShMW6iBQ1v/dnyHsNvI5
 rG0w2BKk6YVUjcP0DMgKMtVwvLCmk8sW1Hj9ZOO+eE/M0pNTmWzyeVlAqPW580WT
 Bu9RWzRrQud2shx9uXMsQypcIA/t5zJ6TtbkG6VXFodYVUAMWQCnjWIH3TEPMwOp
 HcZdz4bUVL7+mD20dXy4RTz6ZRaNEYf+IQUrc2WJehzv5IbIjS9UD1zzNeswEb/t
 rBNa5quvSYC9sc5eKC6tt4qrnbU3urFZp5ugOCl9hgEkEpHrFeDf2QNUjKqHqdx/
 xCPzFZpu61syRTivpykwvbwOkjqoYoT8+/RhcyPDYQiuMhcTr8XcTgRC1XVsm0Xd
 OVU+XXOdaA9GqVWKc20rPbXWpMejM7LZQLpWwPr6Y/z2nTEUlNH+vCMcS4z4zvZS
 7jIA/kRR1v0N0LO1644etthVGxmzTX0u+iLyjhAO7TItwdKsaCXygRjlR1GIjie7
 fwUSXvZTwBpw38+mQj0QEe8N7HQBaRhRIMB8CYs/s+ktdT3flgw2VD1tqU5jXETA
 syzKVcUjjoKkHo1ezErR+Zy8q/K43EqUbxbed0VWN0vvUAXxtnFzJPwhlRg5bpk5
 bGwVvBxeA6cn+3HDtVWecBlztTfyV2w2hNQsJ7NU2X3j5KWE/ynX8IJ+Ibns4uE7
 mON/7w9XG7d17CjY/vNE
 =q1ev
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm Device Tree Changes for v5.3

* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064

* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-hammerhead: add support for display
  ARM: dts: msm8974: add display support
  ARM: dts: qcom: msm8974-hammerhead: add support for backlight
  ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
  ARM: dts: qcom-msm8974: Update coresight DT bindings
  ARM: dts: qcom-apq8064: Update coresight DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:32:08 -07:00
Olof Johansson 0914acd87f ARM: DT: Hisilicon ARM32 SoCs updates for v5.3 
- Updated CoreSight funnel and replicator using new bindings to fix warning
   for the hip04.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCloiAAoJEAvIV27ZiWZcnLQP/Az5KoBhY1q9ve5jF/2vRKHU
 /vWlNp9fYpndza5XGOTFa53/59mI/D7BWUKPcLZ9V9weof8dVD+IDffAZrNozUTs
 anfvn2S7ZlpGxnSnNnDLELk2mAe9jq8JwCi/wPlkHcO7dn55LTREBSRJSDQJj9mg
 5YZmSN/1DM0aw85/PB2P69r1Ri5VNGOpNMEWv8mZGt8DhKfeW0/UMv4r7pzrgkr7
 MEyWopNoe/Ca0u6GjJWz4aSCgmI12IkXkZETYVGEvYnWHMZxzIaPXCuEnyo9aqvW
 L8zMPtVF7yIJcnv2JR8Dwv3VS1b6amThQiHBq4oKWJjZrJzlOA3XHbvLdkwYTOkl
 b2Xls0R/kgetHRoD27imIMMYL81Ftv3gyL8FV0zRybrKWL43tk5rYKgB/NXbZv3U
 02M9jK5BQlnzDVdhg56UWK/Ish3JhbHMbDbUPB/X72eA/2wEb3qJeBrxsVwr6cJx
 UmMOOL4TkKcP6KRGe0SNd6NhX4Go9H+3zlPAGrfU8pEMQF5FqW8BnThb50+AsWTk
 EpwjMudBtAv8eNHbBQonN0VnB3OeWQQUP2B5B5/RT1NNxFG8UFvQdM5pWSKi29tD
 wBmON4jJuwUdPbLbo9LaqEFA4w2IcSOPmvELc6d2t2fv4cFNScic9tITVmWQCZRs
 cdgbu5cMFjqTs25G1zqB
 =vaAE
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt

ARM: DT: Hisilicon ARM32 SoCs updates for v5.3

- Updated CoreSight funnel and replicator using new bindings to fix warning
  for the hip04.

* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hip04: Update coresight DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:30:50 -07:00
Olof Johansson e73f65930f i.MX fixes for 5.2, round 3: 
- A recent testing by Sébastien discovers that the PWM interrupts of
    i.MX6UL were wrongly coded in device tree.  It's a fix for it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEXKFAAoJEFBXWFqHsHzOnh4H/RVNWE/NwhLlcqXHnRq4TPpi
 CdKQ9ZdXYWfi7SkFQJK8bYefklxfY7JUg4Pa/igTbkyeuwpHQugkYRK7is/jsEcd
 TZSCllyvbn4QIOCZJiRsWd3/soEryjaQmZcHTVRLTJXZKhTPB89MuTX7j1BmGd22
 SiSCTRtgVRWOY0ORF9oMtjNq1BiHEtf8M7GwvkifhlZCUh3pyqI7sqg+Zer/CEmM
 TCOpDc42x56igw36/H/TMKyRQestYNlp8AKxg1cagwNrrLNE4D3Icm5UHdd44KuT
 cS5O68BQxUldhfgdejfIZUvVguVlYQkuEZbCW/l18GdiK9IECW/xZRliBqO8RSw=
 =Gn7a
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.2, round 3:
 - A recent testing by Sébastien discovers that the PWM interrupts of
   i.MX6UL were wrongly coded in device tree.  It's a fix for it.

* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:20:08 -07:00
Olof Johansson 4232db2e2a ARM: dts: Amlogic fixes for v5.2-rc 
- fix GPU interrupts and operating voltage
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0LBHEACgkQWTcYmtP7
 xmWjuw//aSfw9ezjFFhwVC2yEBb/lY85VSp5kA6R8p7TsieCFOU+qhY6zfhebu4x
 DRJ5vtrQ8s+FaRwTCoOfupSbRXwN4WyN6SJVhYEwR/Jj4ExMxtWvKc7NoSIi1xGl
 elvPEZ4wzoQ4eQIGKLwEa07vfSYKD03si9IWcp3TxEsmGMzzfhDyv2nT8ovS/t9B
 D0y2Y/s6A40q6Pr4eATzyLAVCVDScOVCtkYmX5OzPhgOD+5pBTQSt5TPzH03prqU
 dZ3cjOUmgvEt1WoZFajVJzngnN4qRTzVZnr9Aue4SS4qb0ytUrK9FtmnoU2LINbE
 cX+rciZuxeRIZiNE/2lxBz7S1R9HwWVzRdzLwaCemm9T0SlJ4CrU1sA+Mdk3eAVM
 Z6d3LYKm9Lbz99Jcy9sTbdjtrWJqYlucd9eJhjwfoQyk2gNuGQJvSWAHgLcw9N1O
 WWcf9Bocj+iQBtn1/uPVCYHgqZaAFndf8iz955Mj+edONeycUglclBmIXHpu4TNJ
 rFX3DalUsiGpHCto+9Hm9qGGXFnFE2FAimrtjeDKI7NcHQnGS1qgsWj/OTgGJVfD
 /iq7/EF27hpm1fX1bzLaWA3LIl5oW4ycksI8qHFfxONx6jXePVkI9gTG96HNbf9n
 XQ5xWcb1XaiG9Ox29sbqSkjrbLF4tGuoMtnkvZrFvLFAYWPEyIc=
 =SdFR
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes

ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:19:26 -07:00
Olof Johansson 98d70a5cd9 This pull request contain Broadcom ARM-based SoCs Device Tree changes 
for 5.3 please pull the following:
 
 - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
   controller
 
 - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
   and provides a fix for devices failing to boot after the removal of
   skelton.dtsi (that commit has been submitted as a separate fix)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl0O5KUACgkQh9CWnEQH
 BwRdAw//VtoEfHJkk90iBmQKmeBW/0hG9QocqGrPuP/PYMOID2rnqut08r0Bvpcy
 7U0YKSVbdZbdSVG8MMNzmtX1SVthUBaQroC1wocXrJL0Onr8loD0RUorbL0gmsIY
 wci3rUEUEn5Zi4R8ihjB+27CLnHnoD+A2ZNETNR8bE2VIbX6jW7qfZA0qMlYJu/S
 7So2MKbQC7ei1XNcFufx4VF/ZfuaHcvkZtpcU5/leRgyOa/0MBux4CbDKmhjvywL
 Ork8/F/TsC882ys5IRWVqC2rmnqqhSv+vFQw3bqSMY5bN5pqIufeP9BtLyWRb+mV
 sIP8RxMGJCwvQU9rVqZz70V4ORaP5b2fkTFG84Hn4n5vjhoQADYuIdSREadO8rRk
 nAc9uZkCS1GRSLPQZqo5WoBCStNtqqYFc9kYJJ27c2JzkafHq3GTuL0F6p/GT9TF
 7hQUJRUsXwIJ0rLrtm4cesIUj9OY32Y0KN0M/jDJuAx8R5009x7u+TnddFRZbvG8
 hulX8G9XCImJ04yyts2s0TwFOlI+8XjTeWfaJQY+I5j0PXxuM+eLYV3MetGY+OL2
 1yKRBNE2mAs22VpQ2e70d5iMwwM/+ydu4aD3pRd0Q8sPMV7HfBLdNMxXaPovzjoA
 0SdZTB73PNpXqBdM1fMD1G7TG+rtGgn1gKyfrShdMRMnRqhB/5Q=
 =AQ6F
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:

- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
  controller

- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
  and provides a fix for devices failing to boot after the removal of
  skelton.dtsi (that commit has been submitted as a separate fix)

* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Fix most DTC W=1 warnings
  ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
  ARM: dts: BCM63xx: Fix DTC W=1 warnings
  ARM: dts: BCM53573: Fix DTC W=1 warnings
  ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
  ARM: dts: Cygnus: Fix most DTC W=1 warnings
  ARM: dts: Fix BCM7445 DTC warnings
  ARM: bcm283x: Enable DMA support for SPI controller
  ARM: dts: bcm: Add missing device_type = "memory" property

Signed-off-by: Olof Johansson <olof@lixom.net>
 2019-06-25 04:15:53 -07:00
Krzysztof Kozlowski 13efd80aca ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4 
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412.  Describe the
GPU as much as possible however still few elements are missing:
1. Exynos4210 bus clock is not described in hardware manual therefore
   the IP gate clock was provided,
2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for
   gating entire IP block (it is now being disabled as unused),
3. Regulator supplies on Trats board.

Limited testing on Odroid U3 (Exynos4412).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-06-24 20:03:42 +02:00
Krzysztof Kozlowski 4a7bc07f5c ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250 
Add nodes for GPU (Mali 400) to Exynos3250.  This is still limited and
not tested:
1. No dynamic voltage and frequency scaling,
2. Not sure what to do with CLK_G3D clock responsible for gating entire
   IP block (it is now being disabled as unused).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-06-24 20:03:42 +02:00
Krzysztof Kozlowski 74b94e6b80 ARM: dts: exynos: Use proper regulator for eMMC memory on Arndale Octa 
The eMMC memory is supplied by LDO18 (PVDD_EMMC_1V8) and buck10
(PVDD_EMMCF_2V8), not by LDO10. The LDO10 (PVDD_PRE_1V8) supplies
instead VDDP_MMC pin of eMMC host interface and it is already marked as
always on.

This change only properly models the hardware and reflects in usage of
regulators.  There is no functional change because:
1. LDO18 cannot be turned off (e.g. by lack of consumers) because in
   off mode it is controlled by LDO18EN pin, which is pulled up by
   always-on regulator LDO2 (PVDD_APIO_1V8).
2. LDO10 is marked as always on so removing its consumer will not have
   effect.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-06-24 19:08:14 +02:00
Krzysztof Kozlowski 3e7f057681 ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family 
Add the PMIC regulator suspend configuration to entire Odroid
XU3/XU4/HC1 family of boards to reduce power usage during suspend.  The
configuration is based on vendor (Hardkernel) reference kernel with
additional buck9 suspend configuration (for USB hub suspend and proper
reset).

Energy consumption measurements from Marek Szyprowski during suspend to
RAM:
 - all at 5 V power supply,
 - before: next-20190620,
 - after: next-20190620 + this patch + suspend configuration for s2mps11
          regulator driver,

Board              | before [mA] | after [mA] |
Odroid HC1         |         120 |       7-10 |
Odroid XU4, sdcard |          88 |        6-9 |
Odroid XU4, eMMC   |         100 |        6-9 |

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
 2019-06-24 19:08:06 +02:00
Krzysztof Kozlowski 1f513ee3e0 ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa board 
Add the PMIC regulator suspend configuration to Arndale Octa board to
reduce power usage during suspend and keep necessary regulators on.  The
configuration is based on vendor (Insignal) reference kernel and the
board datasheet.  Comparing to vendor kernel, additionally turn off in
suspend all regulators controlled by external pin (LDO3, LDO7, LDO18 and
buck10).

This is purely for hardware description because board does not support
Suspend to RAM and the S2MPS11 driver does not support
"regulator-on-in-suspend" property.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-06-24 19:07:58 +02:00
Krzysztof Kozlowski d0b737f939 ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 board 
The eMMC memory on Odroid XU3/XU4 boards is supplied by two regulators
LDO18 and buck10 (and LDO13 for the host interface).

However the Odroid HC1 board does not have eMMC connector so this
regulator does not have to be always on.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
 2019-06-24 19:07:47 +02:00