Commit d5e136a21b ("clk: samsung: Register
clk provider only after registering its all clocks", merged to v3.17-rc1)
modified a way that driver registers registers to core framework. This
change has not been applied to s5pv210 clocks driver, which has been
merged in parallel to that commit. This patch adds a missing call to
samsung_clk_of_add_provider(), so the driver is operational again.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: stable@vger.kernel.org # v3.17+
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Current critical clock list for pistachio enables
only mips and sys clocks by default but there are
also other clocks that are not claimed by anyone and
needs to be enabled by default.
This patch updates the critical clocks that need
to be enabled by default.
Add a separate struct to distinguish the critical clocks
as listed:
1.) core clocks:
a.) mips clock
2.) peripheral system clocks:
a.) sys clock
b.) sys_bus clock
c.) DDR clock
d.) ROM clock
Fixes: b35d7c33419c("CLK: Pistachio: Register core clocks")
Cc: <stable@vger.kernel.org> # 4.1
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Damien.Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
.recalc_rate callback for the fractional PLL doesn't take operating
mode into account when calculating PLL rate. This results in
the incorrect PLL rates when PLL is operating in integer mode.
Operating mode of fractional PLL is based on the value of the
fractional divider. Currently it assumes that the PLL will always
be configured in fractional mode which may not be
the case. This may result in the wrong output frequency.
Also vco was calculated based on the current operating mode which
makes no sense because .set_rate is setting operating mode. Instead,
vco should be calculated using PLL settings that are about to be set.
Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver")
Cc: <stable@vger.kernel.org> # 4.1
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Zdenko Pulitika <zdenko.pulitika@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
PLL enable callbacks are overriding PLL mode (int/frac) and
Noise reduction (on/off) settings set by the boot loader which
results in the incorrect clock rate.
PLL mode and noise reduction are defined by the DSMPD and DACPD bits
of the PLL control register. PLL .enable() callbacks enable PLL
by deasserting all power-down bits of the PLL control register,
including DSMPD and DACPD bits, which is not necessary since
these bits don't actually enable/disable PLL.
This commit fixes the problem by removing DSMPD and DACPD bits
from the "PLL enable" mask.
Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver")
Cc: <stable@vger.kernel.org> # 4.1
Reviewed-by: Andrew Bresitcker <abrestic@chromium.org>
Signed-off-by: Zdenko Pulitika <zdenko.pulitika@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit fixes 32bit integer overflows throughout the pll driver
(i.e. wherever the result of integer multiplication may exceed the
range of u32).
One of the functions affected by this problem is .recalc_rate. It
returns incorrect rate for some pll settings (not for all though)
which in turn results in the incorrect rate setup of pll's child
clocks.
Fixes: 43049b0c83f17("CLK: Pistachio: Add PLL driver")
Cc: <stable@vger.kernel.org> # 4.1
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Zdenko Pulitika <zdenko.pulitika@imgtec.com>
Signed-off-by: Govindraj Raja <govindraj.raja@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The latest Tegra clk pull had some problems. Fix them.
drivers/clk/tegra/clk-tegra124.c:1450:6: warning: symbol 'tegra124_clock_assert_dfll_dvco_reset' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra124.c:1466:6: warning: symbol 'tegra124_clock_deassert_dfll_dvco_reset' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra124.c:1476:5: warning: symbol 'tegra124_reset_assert' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra124.c:1486:5: warning: symbol 'tegra124_reset_deassert' was not declared. Should it be static?
drivers/clk/tegra/clk-dfll.c:590 dfll_load_i2c_lut() warn: inconsistent indenting
drivers/clk/tegra/clk-dfll.c:1448 dfll_build_i2c_lut() warn: unsigned 'td->i2c_lut[0]' is never less than zero.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This contains the DFLL driver needed to implement CPU frequency scaling
on Tegra.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QWKO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
clk: tegra: Changes for v4.3-rc1
This contains the DFLL driver needed to implement CPU frequency scaling
on Tegra.
Fix the enable bit of the pseudorandom number generator clock.
Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Fixes: 3966fab8b6 "clk: qcom: Add MSM8916 Global Clock Controller support"
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Init data marked const should be annotated with __initconst for
correctness and not __initdata. This also fixes LTO builds that
otherwise fail with section mismatch errors.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
[sboyd@codeaurora.org: Dropped hunks that moved const char *
arrays to const char * const]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll
does have an init callback to make sure the boot-selected frequency is
using the expected pll settings and resets the same frequency using
the values provided in the driver if necessary.
The setting itself also involves remuxing the pll-mux temporarily to
the xin24m source to let the new pll rate settle. Until now this worked
flawlessly, even when it had the flaw of accessing the mux settings
before the mux actually got registered.
With the recent clock-core conversions this flaw became apparent in
null pointer dereference in
[<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8)
[<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320)
So to fix that, simply register the pll-mux before the pll, so that
it will be fully initialized when the pll clock executes its init-
callback and possibly touches the pll-mux clock.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The base addresses for the Ux500 PRCC controllers are hardcoded,
let's move them to the clock node in the device tree and delete
the constants.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
__clk_set_parent_after() actually used the second argument then we
could put this duplicate logic in there and call it with a different
order of arguments in the success vs. error paths in this function.
Cc: Mike Turquette <mturquette@linaro.org>
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use the provider based method to get a clock's name so that we
can get rid of the clk member in struct clk_hw one day. Mostly
converted with the following coccinelle script.
@@
struct clk_hw *E;
@@
-__clk_get_name(E->clk)
+clk_hw_get_name(E)
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kevin Cernekee <cernekee@chromium.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
On Hi6220, there have some clocks which can use mailbox channel to send
messages to power controller to change frequency; this includes CPU, GPU
and DDR clocks.
For dynamic frequency scaling, firstly need write the frequency value to
SRAM region, and then send message to mailbox to trigger power controller
to handle this requirement. This driver will use syscon APIs to pass SRAM
memory region and use common mailbox APIs for channels accessing.
This init driver will support cpu frequency change firstly.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
PLL VCO frequency is given by Fvco = Fref * 2 * NF / NR
in integer-N mode, or by Fvco = Fref * SSN / NR in Spread
Spectrum (fractional-N) mode. Thus fix the missing part
of NR
Signed-off-by: Guo Zeng <guo.zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
bit4 thcpum_cpudiv4_clken r/w
thcpum_cpudiv4_clk clock enable (default: 1)
Root clock CPU_CLK must be enabled for this clock to be enabled
bit3 coresight_tpiu_clken r/w
coresight_tpiu_clk clock enable (default: 0)
Root clock TPIU_CLK must be enabled for this clock to be enabled
Signed-off-by: Guo Zeng <guo.zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
I cannot believe that I spend quite a lot time in finding this bug.
It seems a pitfall people tend to fall in.
In "int64 = int32 * int32", conversion from 32-bits to 64-bits comes
after the multiplication. So this statement may not work as expected.
Signed-off-by: Yibo Cai <yibo.cai@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
this patch makes mux clks can be referenced by device drivers.
Signed-off-by: Guo Zeng <guo.zeng@csr.com>
Signed-off-by: Barry Song <Barry.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The debug base clock can be bypassed from the main PLL to the OSC1 clock.
The bypass register is the staysoc1(0x10) register that is in the clock
manager.
This patch adds the option to get the correct parent for the debug base
clock.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This code is unused and not coming back. Let's kill it off.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Remove these APIs now that we've converted all users to the
replacement struct clk_hw based versions.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This driver uses __clk_get_name() when it's dealing with struct
clk_hw pointers. Use the simpler form so that we can get rid of
the clk member in struct clk_hw one day.
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API. This code is
calling the consumer APIs to change the parent to a 1 MHz fixed
rate clock for each of the clocks that the driver provides. Move
to using the assigned-clock-parents DT property for this instead.
Because this is an ABI break, detect if the property is missing
and fall back to setting the parent explicitly before the clocks
are registered.
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: "Emilio López" <emilio@elopez.com.ar>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs. This also
removes a clk_get() in this driver that can just as easily use
of_clk_get_parent_name() instead.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We're removing struct clk from the clk provider API, so switch
this code to using the clk_hw based provider APIs.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This code is never called with a basic clock type, so the check
here is not doing anything useful and is blocking the removal of
__clk_get_flags(). Remove the check so we can delete the
__clk_get_flags() API.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Mostly converted with the following snippet:
@@
struct clk_hw *E;
@@
-__clk_get_flags(E->clk)
+clk_hw_get_flags(E)
Acked-by: Tero Kristo <t-kristo@ti.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk providers shouldn't need to use the consumer APIs (clk.h).
Add provider APIs to replace the __clk_*() APIs that take a
struct clk_hw as their first argument instead of a struct clk.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=tdwi
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Devicetree changes for v4.3-rc1
Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.
* tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add gpio-ranges property
ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
ARM: tegra: Add Tegra124 PMU support
ARM: tegra: jetson-tk1: Add GK20A GPU DT node
ARM: tegra: venice2: Add GK20A GPU DT node
ARM: tegra: Add IOMMU node to GK20A
ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
ARM: tegra: Add entries for cpufreq on Tegra124
ARM: tegra: Enable the DFLL on the Jetson TK1
ARM: tegra: Add the DFLL to Tegra124 device tree
pinctrl: tegra: Only set the gpio range if needed
clk: tegra: Add the DFLL as a possible parent of the cclk_g clock
clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend
clk: tegra: Add Tegra124 DFLL clocksource platform driver
clk: tegra: Add DFLL DVCO reset control for Tegra124
clk: tegra: Introduce ability for SoC-specific reset control callbacks
clk: tegra: Add functions for parsing CVB tables
clk: tegra: Add closed loop support for the DFLL
clk: tegra: Add library for the DFLL clock source (open-loop mode)
clk: tegra: Add binding for the Tegra124 DFLL clocksource
Signed-off-by: Olof Johansson <olof@lixom.net>
- add cpu clock configuration data and instantiate cpu clock
for exynos3250, 4210, 4412 and 5250 SoCs to support Samsung
specific cpu-clock type
* Note this branch has been provided to clk tree as a topic branch
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=AWdl
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
Samsung clk driver updates for v4.3
- add cpu clock configuration data and instantiate cpu clock
for exynos3250, 4210, 4412 and 5250 SoCs to support Samsung
specific cpu-clock type
* Note this branch has been provided to clk tree as a topic branch
* tag 'samsung-clk-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos4x12: add cpu clock configuration data and instantiate cpu clock
clk: exynos3250: Add cpu clock configuration data and instaniate cpu clock
clk: exynos5250: add cpu clock configuration data and instantiate cpu clock
Signed-off-by: Olof Johansson <olof@lixom.net>
DPLL for am4372 cpsw Ethernet driver. Also add ARM global and
local timers for am4372.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4z1B
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Fix up bogus RTC compatible change for am4372 and add missing
DPLL for am4372 cpsw Ethernet driver. Also add ARM global and
local timers for am4372.
* tag 'omap-for-v4.3/dt-pt4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: boot: dts: am4372: add ARM timers and SCU nodes
ARM: dts: AM4372: Add the am4372-rtc compatible string
ARM: dts: am4372: Set the default clock rate for dpll_clksel_mac_clk clock
ARM: dts: AM437X: add dpll_clksel_mac_clk node
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add audio and eTSEC device support and update dspi node for LS1021A.
- Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable
a bunch of device support for i.MX6UL, including RTC, power key, USB,
QSPI, and dual FEC.
- Enable HDMI and LVDS dual display support for a few imx6qdl boards.
- Support of imx6sl-warp board rev1.12, the version which will be
publicly available for the customers.
- A few i.MX7D device additions, watchdog, cortex-a7 coresight
components, RTC, power key, power off.
- Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc.,
update ADC node, and define stdout-path property.
- A few random updates for i.MX27 and i.MX53 devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVyhktAAoJEFBXWFqHsHzOjQwH/0CXyzRUCJjHqxAHsnvHzOZG
AvjYWqaimxP5PD6TRG1bRxfWWXNL7zZGqj9Jd/l5HIWdWfUxnOLeMy40yfcs+AsH
9CHUunu0rahIDY6YF4gA7F5jyfnSIzxwE8Bkva7nmXvf0XmazTwhCXxYPzdBjMSG
Cf39datyTj9ZS3DD/DAKzRN//zebQCJmPuAdmIlRZljBkoLVPeEZrVxkSN0trRin
vKPQIpamM2DXIMmdiPK52J0j8Vwq4qbiGvvAwUKsaRCUVYfpunpVcZSYgMqm8iEa
7PKuurbVeuvZLzS0Bdq05tCkwVXt0upk0ayf0i8DkHFExX79TNTbONOLJwmigjo=
=iAvA
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree updates for 4.3:
- Add audio and eTSEC device support and update dspi node for LS1021A.
- Add initial i.MX6UL and imx6ul-14x14-evk board support, and enable
a bunch of device support for i.MX6UL, including RTC, power key, USB,
QSPI, and dual FEC.
- Enable HDMI and LVDS dual display support for a few imx6qdl boards.
- Support of imx6sl-warp board rev1.12, the version which will be
publicly available for the customers.
- A few i.MX7D device additions, watchdog, cortex-a7 coresight
components, RTC, power key, power off.
- Some Vybrid updates: add device support for I2C, QSPI, eSDHC etc.,
update ADC node, and define stdout-path property.
- A few random updates for i.MX27 and i.MX53 devices.
* tag 'imx-dt-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
ARM: dts: imx6ul: add snvs power key support
ARM: dts: imx6ul: add RTC support
ARM: dts: imx6ul: enable GPC as extended interrupt controller
ARM: dts: imx6sx: correct property name for wakeup source
ARM: dts: add property for maximum ADC clock frequencies
ARM: dts: imx7d: enable snvs rtc, onoffkey and power off
ARM: dts: imx6ul-14x14-evk: add fec1 and fec2 support
ARM: dts: imx: add fec1 and fec2 nodes for SOC i.MX6UL
ARM: dts: imx27: add support of internal rtc
ARM: dts: vf-colibri: define stdout-path property
ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR
ARM: dts: ls1021a: Add the eTSEC controller nodes
ARM: dts: imx6ul: add qspi support
ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h
ARM: dts: imx6ul: add usb host and function support
ARM: dts: vfxxx: Add io-channel-cells property for ADC node
ARM: dts: ls1021a: Add dts nodes for audio on LS1021A
ARM: imx6qdl-sabreauto.dtsi: enable USB support
ARM: dts: imx: update snvs to use syscon access register
ARM: dts: imx: add imx6ul and imx6ul evk board support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=IHq6
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clock fix from Stephen Boyd:
"A one-liner for a regression found in the PXA clock driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: pxa: pxa3xx: fix CKEN register access
With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos4x12.
Based on the earlier work by Thomas Abraham.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
pclk_pd_pmu needs to keep running and with the upcoming gpio clock
handling this is not always the case anymore. So add it to the list
of critical clocks for now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Neither spdif_src nor spdif_pll exists, judging by the vendor kernel in
both cases spdif_pre was meant. This brings the naming in line and
hierachy in line with that of sclk_i2s0.
Also allow sclk_spdif and spdif_frac to change their parents rate as
that the upstream dividers are purely there to feed sclk_spdif
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Nothing uses it, and I can't find any evidence that anything ever has.
Its role is now filled by the core clock in the firmware driver.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
While children of orphan clocks are not carried in the orphan-list itself,
they're nevertheless orphans in their own right as they also don't have an
input-rate available. To ease tracking if a clock is an orphan or has an
orphan in its parent path introduce an orphan field into struct clk and
update it and the fields in child-clocks when a clock gets added or removed
from the orphan-list.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: kernel@pengutronix.de
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Barry Song <baohua@kernel.org>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
Cc: emilio@elopez.com.ar
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
[sboyd@codeaurora.org: s/clk/core/ in new function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The gates were handled with a common piece of framework that was
registering all gates array, that was not using the CLK_OF_DECLARE logic,
and was not using clock-indices but some private masks that were pretty
much equivalent.
Move this code in a new driver that handles all the gates array and solves
both these issues.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
[sboyd@codeaurora.org: Include clk.h for consumer API usage]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The i.MX clock updates for 4.3:
- Provide a better IPU clock initial settings on imx6dl for getting
HDMI and LVDS at the same time.
- Add clock driver support for i.MX6UL SoC
- Add a second clock for RTC device on i.MX31 and i.MX35
Add Clock Domain support to the RZ Clock Pulse Generator (CPG) driver
using the generic PM Domain. This allows to power-manage the module
clocks of SoC devices that are part of the CPG/MSTP Clock Domain using
Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Clock Domain support to the R-Car Gen2 Clock Pulse Generator (CPG)
driver using the generic PM Domain. This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Clock Domain support to the R-Car H1 Clock Pulse Generator (CPG)
driver using the generic PM Domain. This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Also update the reg property in the DT binding doc example to match the
actual dtsi, which uses #address-cells and #size-cells == 1, not 2.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG)
driver using the generic PM Domain. This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add Clock Domain support to the Clock Pulse Generator (CPG) Module Stop
(MSTP) Clocks driver using the generic PM Domain. This allows to
power-manage the module clocks of SoC devices that are part of the
CPG/MSTP Clock Domain using Runtime PM, or for system suspend/resume.
SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a
proper "power-domains" property.
The CPG/MSTP Clock Domain code will scan such devices for clocks that
are suitable for power-managing the device, by looking for a clock that
is compatible with "renesas,cpg-mstp-clocks".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add CAAM clock support to the i.MX6 clocking infrastructure.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We have a driver now for IIC, so disable reset for them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Clocks 0 to 31 are on CKENA, and not CKENB. The clock register names
were inadequately inverted. As a consequence, all clock operations were
happening on CKENB, because almost all but 2 clocks are on CKENA.
As the clocks were activated by the bootloader in the former tests, it
escaped the testing that the wrong clock gate was manipulated. The error
was revealed by changing the pxa3xx-nand driver to a module, where upon
unloading, the wrong clock was disabled in CKENB.
Fixes: 9bbb8a338f ("clk: pxa: add pxa3xx clock driver")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2014320
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The imx35 don't define clocks for rtc.
This patch add two clocks, as needed
by the mxc rtc driver.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mxc rtc driver needs two clock.
It was defined only one clock, so we
define the second clock.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Fix earlyprintk, jump trampoline for SMP
- Update git tree location
- Setup PL310 aux (bit 22)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEABECAAYFAlW7MWAACgkQykllyylKDCHkTACfT3Kzs+Cl7jc9A4kQ6dkbUqtC
E1MAn0g3yHcqGHgUtfyHu6lXtptJFbDn
=DuTZ
-----END PGP SIGNATURE-----
Merge tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/soc
arm: Xilinx Zynq SoC patches for v4.2
- Fix earlyprintk, jump trampoline for SMP
- Update git tree location
- Setup PL310 aux (bit 22)
* tag 'zynq-soc-for-4.3' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: reserve space for jump target in secondary trampoline
clk: zynq: remove redundant $(CONFIG_ARCH_ZYNQ) in Makefile
MAINTAINERS: Update Zynq git tree location
ARM: zynq: Set bit 22 in PL310 AuxCtrl register (6395/1)
ARM: zynq: Fix earlyprintk in big endian mode
Signed-off-by: Olof Johansson <olof@lixom.net>
*of_iomap()* will check the device node pointer, and if the pointer is
NULL it will return error code. So refine clock's init flow by checking
the device node with this simple way; and polish a little for the print
out message.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Kbuild descends into drivers/clk/zynq/ only when CONFIG_ARCH_ZYNQ
is enabled. (see drivers/clk/Makefile)
$(CONFIG_ARCH_ZYNQ) in drivers/clk/zynq/Makefile always evaluates
to 'y'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The ">" should be ">=" or we end up reading beyond the end of the array.
Fixes: 6e973d2c43 ('clk: vexpress: Add separate SP810 driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver.
However TSADC is present only on Exynos4210 so on Trats2 board (with
Exynos4412 SoC) the exynos-adc driver could not be probed:
ERROR: could not get clock /adc@126C0000:adc(0)
exynos-adc 126c0000.adc: failed getting clock, err = -2
exynos-adc: probe of 126c0000.adc failed with error -2
Instead on Exynos4x12 SoCs the main clock used by Analog to Digital
Converter is located in different register and it is named in datasheet
as PCLK_ADC. Regardless of the name the purpose of this PCLK_ADC clock
is the same as purpose of TSADC from Exynos4210.
The patch adds gate clock for Exynos4x12 using the proper register so
backward compatibility is preserved. This fixes the probe of exynos-adc
driver on Exynos4x12 boards and allows accessing sensors connected to it
on Trats2 board (ntc,ncp15wb473 AP and battery thermistors).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: c63c574330 ("ARM: dts: Add ADC's dt data to read raw data for exynos4x12")
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:
IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN
For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Mike Turquette <mturquette@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The array of parent names can be made as array of const pointers to
const strings.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch cleans up the driver for,
- Use devm_kcalloc() variant instead of devm_kzalloc() for array
allocation.
- clk_prepare()/unprepare(), remove "ret" variable as it is not required
- use __exit for cleanup function
As I am referring this driver as a reference for my 88pm800 clk driver,
applying same changes here as well.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The recursive spinlock implementation trips up sparse and it
complains that these functions have lock imbalances. That isn't
really true though, so add some __acquires() and __releases()
information so that sparse is quiet.
drivers/clk/clk.c:116:22: warning: context imbalance in 'clk_enable_lock' - wrong count at exit
drivers/clk/clk.c:141:9: warning: context imbalance in 'clk_enable_unlock' - unexpected unlock
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The basic clock types use conditional locking for the register
accessor spinlocks. Add __acquire() and __release() markings in
the right locations so that sparse isn't tripped up on the
conditional locking.
drivers/clk/clk-mux.c:68:12: warning: context imbalance in 'clk_mux_set_parent' - different lock contexts for basic block
drivers/clk/clk-divider.c:379:12: warning: context imbalance in 'clk_divider_set_rate' - different lock contexts for basic block
drivers/clk/clk-gate.c:71:9: warning: context imbalance in 'clk_gate_endisable' - different lock contexts for basic block
drivers/clk/clk-fractional-divider.c:36:9: warning: context imbalance in 'clk_fd_recalc_rate' - different lock contexts for basic block
drivers/clk/clk-fractional-divider.c:68:12: warning: context imbalance in 'clk_fd_set_rate' - different lock contexts for basic block
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The missing license causes the clk-qcom.ko module to taint the
kernel. Add the appropriate license to avoid taint.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Let's encourage const arrays of parent names like other basic
clock types.
Cc: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit allows certain Broadcom STB clock dividers to be used with
clk-divider.c. It allows for a clock whose field value is the equal
to the divisor, execpt when the field value is zero, in which case the
divisor is 2^width. For example, consider a divisor clock with a two
bit field:
value divisor
0 4
1 1
2 2
3 3
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Convert the code to use GENMASK() helper instead of div_mask() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Legacy drivers which are not yet ported, such as cpufreq-pxa[23]xx, rely
on pxaXXx_get_clk_frequency_khz() to find the CPU core frequency.
This reporting was broken because the expected unit is kHz and not
Hz. Fix the reporting for pxa25x, pxa27x and pxa3xx.
Fixes: fe7710fae4 ("clk: add pxa25x clock drivers")
Fixes: d40670dc61 ("clk: add pxa27x clock drivers")
Fixes: 9bbb8a338f ("clk: pxa: add pxa3xx clock driver")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
In the TRM we see that BWADJ is "a 12-bit bus that selects the values
1-4096 for the bandwidth divider (NB)":
NB = BWADJ[11:0] + 1
The recommended setting of NB: NB = NF / 2.
So:
NB = NF / 2
BWADJ[11:0] + 1 = NF / 2
BWADJ[11:0] = NF / 2 - 1
Right now, we have:
{ \
.rate = _rate##U, \
.nr = _nr, \
.nf = _nf, \
.no = _no, \
.bwadj = (_nf >> 1), \
}
That means we set bwadj to NF / 2, not NF / 2 - 1
All of this is a bit confusing because we specify "NR" (the 1-based
value), "NF" (the 1-based value), "NO" (the 1-based value), but
"BWADJ" (the 0-based value) instead of "NB" (the 1-based value).
Let's change to working with "NB" and fix the off by one error. This
may affect PLL jitter in a small way (hopefully for the better).
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* cleanup-clk-h-includes: (62 commits)
clk: Remove clk.h from clk-provider.h
clk: h8300: Remove clk.h and clkdev.h includes
clk: at91: Include clk.h and slab.h
clk: ti: Switch clk-provider.h include to clk.h
clk: pistachio: Include clk.h
clk: ingenic: Include clk.h
clk: si570: Include clk.h
clk: moxart: Include clk.h
clk: cdce925: Include clk.h
clk: Include clk.h in clk.c
clk: zynq: Include clk.h
clk: ti: Include clk.h
clk: sunxi: Include clk.h and remove unused clkdev.h includes
clk: st: Include clk.h
clk: qcom: Include clk.h
clk: highbank: Include clk.h
clk: bcm: Include clk.h
clk: versatile: Remove clk.h and clkdev.h includes
clk: ux500: Remove clk.h and clkdev.h includes
clk: tegra: Properly include clk.h
...
Use of_clk_parent_fill to fill in the parent clock names' array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use of_clk_parent_fill to fill in the parent clock names' array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: "Emilio López" <emilio@elopez.com.ar>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use of_clk_parent_fill to fill in the parent clock names' array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by Gabriel Fernandez <gabriel.fernandez@st.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use of_clk_parent_fill to fill in the parent clock names' array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use of_clk_parent_fill to fill in the parent clock names' array.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
MT8173 MMPLL frequency settings are different from common PLLs.
It needs different post divider settings for some ranges of frequency.
This patch add support for MT8173 MMPLL frequency setting by adding
div-rate table to lookup suitable post divider setting under a
specified frequency.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Avoid u32 overflow when calculate post divider setting, and
increase the max post divider setting from 3 (/8) to 4 (/16).
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Write postdiv and pcw settings at the same time for PLLs if postdiv
and pcw settings are on the same register.
This is need by PLLs such as MT8173 MMPLL and ARM*PLL.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk providers are using the consumer APIs to set min/max rates on
the clock they're providing. To encourage clk providers to move
away from the consumer APIs, add a provider API to set the
min/max rate of a clock. The assumption is that this is done
before the clock can be requested via clk_get() and that the
clock rate is already within the boundaries of the min/max that's
configured.
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use devm_clk_register() to simplify the code by removing
twl6040_clk_remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The devm_clk_unregister() in .probe error case is not necessary as it will
be automatically called when probe fails.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The CCF implementations for the various shmobile SoCs don't use clkdev
functionality, hence drop the inclusion of <linux/clkdev.h>.
Add the missing #include <linux/slab.h>, which was included implicitly
through <asm/clkdev.h> before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add __force here so that sparse doesn't complain about us playing
tricks with __iomem.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Sparse complains about these structures missing static, but they
also don't look to be used. Remove them.
drivers/clk/ti/clk-3xxx.c:74:30: warning: symbol 'clkhwops_omap3430es2_ssi_wait' was not declared. Should it be static?
drivers/clk/ti/clk-3xxx.c:157:30: warning: symbol 'clkhwops_omap3430es2_hsotgusb_wait' was not declared. Should it be static?
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This variable isn't exported outside of this file so mark it
static. Silences the following sparse warning:
drivers/clk/ti/clk.c:36:24: warning: symbol 'ti_clk_features' was not declared. Should it be static?
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
smatch reports a failure to check kzalloc() here:
drivers/clk/ti/clk.c:232
omap2_clk_provider_init() error: potential null dereference 'io'.
(kzalloc returns null)
Check for an allocation failure and return -ENOMEM.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
From Tero Kristo:
"This pull request contains the TI clock driver set to move the
clock implementations under clock driver. Some small portions of
the clock driver code still remain under mach-omap2 after this,
it should be decided whether this code is now obsolete and should
be deleted or should someone try to fix it."
Slight merge conflicts with determine_rate prototype changes.
of_clk_get_parent_count() may return negative error code, so num_parents
needs to be int rather than unsigned int.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The other ce clocks have the flag set, but ce1 doesn't, so
clk_set_rate() doesn't propagate up the tree to the ce1_src_clk.
Set the flag as this is supported.
Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Fixes: 0282465320 ("clk: qcom: Add APQ8084 Global Clock Controller support")
Fixes: d33faa9ead ("clk: qcom: Add support for MSM8974's global clock controller (GCC)")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We don't unlock the mutex if we fail to allocate the parent names
array. Unlock it and return an error in this case as well.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There doesn't seem to be any reason why we can't use the standard
readb()/writeb() accessors here because ctrl_inb() and
ctrl_outb() match the generic implementation of readb() and
writeb() that the h8300 architecture uses. This allows us to test
compile this driver on other architectures besides h8300.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We don't need to print an error on allocation failures, drop it.
While we're here, change the sizeof() to be sizeof(*<ptr>) to
make code more future proof.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.
Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.
The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch add CPU clock configuration data and instantiate the CPU
clock type for Exynos3250 to support Samsung specific cpu-clock type.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos5250.
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: split exynos5250 support from the original patch]
[b.zolnierkie: moved E5250_CPU_DIV[0,1] macros to clk-exynos5250.c]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Neither of these includes are used in these files, remove them.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly. Also include slab.h instead of relying on clkdev.h
for it.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This file isn't a clock provider but uses the consumer API, so
include clk.h instead of clk-provider.h.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This file implements the clk API and so it should include clk.h
directly instead of indirectly including it through
clk-provider.h.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly. Also remove clkdev.h in files that aren't using it
and include slab.h when clkdev.h was being used to implicitly
include it.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock provider uses the consumer API, so include clk.h
explicitly.
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it and replace them with slab.h in files that were relying on the
implicit include of slab.h in clkdev.h.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are using
it. Also add in a clkdev.h include that was missing in a file
using clkdev APIs.
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Move the include of clk.h into
clk-common.c because that's the only file that's really using
clk.h, even if it's included into the atlas6 and prima2 files.
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are
using it. The clkdev.h header isn't always used either, so remove
it and add in slab.h where files were relying on it to include
slab for them.
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. The clk.h include is being included in all
mxs files because it's part of mxs/clk.h even though nothing
actually requires it in that file. Move the clk.h include to the
C files that are actually using it and remove the clk.h include
from the header file. The clkdev.h include isn't used either, so
drop it too.
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include the header if necessary. The
clkdev.h include isn't used here either, so drop it and add in
slab.h to keep things compiling.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, so drop
it and add in slab.h to keep things compiling.
Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.
Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We don't need to include clk.h in header files, just forward
declare struct clk here. This leads us to a few places where the
include of clk.h was missing in C files. Add them.
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Henry Chen <henryc.chen@mediatek.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also drop the clkdev.h include in files that
aren't using it.
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>