Commit Graph

2306 Commits

Author SHA1 Message Date
Axel Lin 5c757456c1 clk: twl6040: Convert to use devm_clk_register
Use devm_clk_register() to simplify the code by removing
twl6040_clk_remove().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:48 -07:00
Axel Lin 264e3b75de clk: s2mps11: Simplify s2mps11_clk_probe unwind paths
The devm_clk_unregister() in .probe error case is not necessary as it will
be automatically called when probe fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:46 -07:00
Geert Uytterhoeven 5a1cfafaea clk: shmobile: Remove unneeded #include <linux/clkdev.h>
The CCF implementations for the various shmobile SoCs don't use clkdev
functionality, hence drop the inclusion of <linux/clkdev.h>.

Add the missing #include <linux/slab.h>, which was included implicitly
through <asm/clkdev.h> before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:44 -07:00
Stephen Boyd 14cc4e9578 clk: ti: Force pointer to be __iomem
Add __force here so that sparse doesn't complain about us playing
tricks with __iomem.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:41 -07:00
Stephen Boyd 76642eb4cb clk: ti: clk-3xxx: Remove unused structures
Sparse complains about these structures missing static, but they
also don't look to be used. Remove them.

drivers/clk/ti/clk-3xxx.c:74:30: warning: symbol 'clkhwops_omap3430es2_ssi_wait' was not declared. Should it be static?
drivers/clk/ti/clk-3xxx.c:157:30: warning: symbol 'clkhwops_omap3430es2_hsotgusb_wait' was not declared. Should it be static?

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:39 -07:00
Stephen Boyd 3fe6d69742 clk: ti: Mark ti_clk_features static
This variable isn't exported outside of this file so mark it
static. Silences the following sparse warning:

drivers/clk/ti/clk.c:36:24: warning: symbol 'ti_clk_features' was not declared. Should it be static?

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:37 -07:00
Stephen Boyd f645f72d87 clk: ti: Check kzalloc() for failures
smatch reports a failure to check kzalloc() here:

drivers/clk/ti/clk.c:232
omap2_clk_provider_init() error: potential null dereference 'io'.
(kzalloc returns null)

Check for an allocation failure and return -ENOMEM.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:35 -07:00
Stephen Boyd 4d34105620 Merge branch 'for-4.2/ti-clk-move' of https://github.com/t-kristo/linux-pm into clk-next
From Tero Kristo:
  "This pull request contains the TI clock driver set to move the
   clock implementations under clock driver. Some small portions of
   the clock driver code still remain under mach-omap2 after this,
   it should be decided whether this code is now obsolete and should
   be deleted or should someone try to fix it."

Slight merge conflicts with determine_rate prototype changes.
2015-07-28 11:58:26 -07:00
Axel Lin e306479ac2 clk: h8300: Fix signness bug
of_clk_get_parent_count() may return negative error code, so num_parents
needs to be int rather than unsigned int.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:53:20 -07:00
Stephen Boyd d7a304e9d0 clk: qcom: Set CLK_SET_RATE_PARENT on ce1 clocks
The other ce clocks have the flag set, but ce1 doesn't, so
clk_set_rate() doesn't propagate up the tree to the ce1_src_clk.
Set the flag as this is supported.

Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Fixes: 0282465320 ("clk: qcom: Add APQ8084 Global Clock Controller support")
Fixes: d33faa9ead ("clk: qcom: Add support for MSM8974's global clock controller (GCC)")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:51:40 -07:00
Stephen Boyd c5e857a46a clk: gpio: Unlock mutex on error path
We don't unlock the mutex if we fail to allocate the parent names
array. Unlock it and return an error in this case as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:51:39 -07:00
Stephen Boyd 006cb8b66e clk: h8300: Use standard Linux I/O accessors
There doesn't seem to be any reason why we can't use the standard
readb()/writeb() accessors here because ctrl_inb() and
ctrl_outb() match the generic implementation of readb() and
writeb() that the h8300 architecture uses. This allows us to test
compile this driver on other architectures besides h8300.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:51:38 -07:00
Stephen Boyd 9298f0267c clk: h8300: Drop allocation printk and cleanup sizeof style
We don't need to print an error on allocation failures, drop it.
While we're here, change the sizeof() to be sizeof(*<ptr>) to
make code more future proof.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:51:36 -07:00
Stephen Boyd 19aab27308 Merge branch 'clk-determine-rate-struct' into clk-next
* clk-determine-rate-struct:
  clk: fix some determine_rate implementations
  clk: change clk_ops' ->determine_rate() prototype
2015-07-28 11:51:30 -07:00
Boris Brezillon 57d866e606 clk: fix some determine_rate implementations
Some determine_rate implementations are not returning an error
when they failed to adapt the rate according to the rate request.
Fix them so that they return an error instead of silently
returning 0.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:13:32 -07:00
Boris Brezillon 0817b62cc0 clk: change clk_ops' ->determine_rate() prototype
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:12:01 -07:00
Chanwoo Choi 7c9422ef55 clk: exynos3250: Add cpu clock configuration data and instaniate cpu clock
This patch add CPU clock configuration data and instantiate the CPU
clock type for Exynos3250 to support Samsung specific cpu-clock type.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-24 12:52:58 +09:00
Thomas Abraham d7cc4c8165 clk: exynos5250: add cpu clock configuration data and instantiate cpu clock
With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos5250.

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[b.zolnierkie: split exynos5250 support from the original patch]
[b.zolnierkie: moved E5250_CPU_DIV[0,1] macros to clk-exynos5250.c]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-24 12:41:48 +09:00
Stephen Boyd 6acc63b502 clk: h8300: Remove clk.h and clkdev.h includes
Neither of these includes are used in these files, remove them.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:41 -07:00
Stephen Boyd 6a8ce8c96c clk: at91: Include clk.h and slab.h
This clock provider uses the consumer API, so include clk.h
explicitly. Also include slab.h instead of relying on clkdev.h
for it.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:40 -07:00
Stephen Boyd 27df3ee278 clk: ti: Switch clk-provider.h include to clk.h
This file isn't a clock provider but uses the consumer API, so
include clk.h instead of clk-provider.h.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:38 -07:00
Stephen Boyd cb58e14efb clk: pistachio: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:37 -07:00
Stephen Boyd e2a657090a clk: ingenic: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:36 -07:00
Stephen Boyd 530b544ebf clk: si570: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:35 -07:00
Stephen Boyd 67bb5408a8 clk: moxart: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:33 -07:00
Stephen Boyd a826a1a421 clk: cdce925: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:32 -07:00
Stephen Boyd 3c37311730 clk: Include clk.h in clk.c
This file implements the clk API and so it should include clk.h
directly instead of indirectly including it through
clk-provider.h.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:30 -07:00
Stephen Boyd 5402494f9b clk: zynq: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:29 -07:00
Stephen Boyd 1b29e60157 clk: ti: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:28 -07:00
Stephen Boyd 9dfefe8c76 clk: sunxi: Include clk.h and remove unused clkdev.h includes
This clock provider uses the consumer API, so include clk.h
explicitly. Also remove clkdev.h in files that aren't using it
and include slab.h when clkdev.h was being used to implicitly
include it.

Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:26 -07:00
Stephen Boyd d5f728acd9 clk: st: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:25 -07:00
Stephen Boyd 8803609082 clk: qcom: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:24 -07:00
Stephen Boyd 9bd6314c2e clk: highbank: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:22 -07:00
Stephen Boyd d4945ab647 clk: bcm: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:21 -07:00
Stephen Boyd 6d31e3b22e clk: versatile: Remove clk.h and clkdev.h includes
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it and replace them with slab.h in files that were relying on the
implicit include of slab.h in clkdev.h.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:20 -07:00
Stephen Boyd a162ca912c clk: ux500: Remove clk.h and clkdev.h includes
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also remove clkdev.h in files that aren't using
it.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:18 -07:00
Stephen Boyd 584ac4e935 clk: tegra: Properly include clk.h
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are using
it. Also add in a clkdev.h include that was missing in a file
using clkdev APIs.

Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:17 -07:00
Stephen Boyd c302e1e280 clk: spear: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:15 -07:00
Stephen Boyd b0af24b523 clk: socfpga: Remove clk.h and clkdev.h includes
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:14 -07:00
Stephen Boyd fdb94059d8 clk: sirf: Properly include clk.h
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Move the include of clk.h into
clk-common.c because that's the only file that's really using
clk.h, even if it's included into the atlas6 and prima2 files.

Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:13 -07:00
Stephen Boyd 6f1ed07a14 clk: samsung: Properly include clk.h and clkdev.h
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h in files that are
using it. The clkdev.h header isn't always used either, so remove
it and add in slab.h where files were relying on it to include
slab for them.

Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:11 -07:00
Stephen Boyd f684ff8b67 clk: rockchip: Properly include clk.h
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:10 -07:00
Stephen Boyd 39482a1331 clk: nxp: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:08 -07:00
Stephen Boyd bb0bf35452 clk: mxs: Include clk.h in C files that use it
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. The clk.h include is being included in all
mxs files because it's part of mxs/clk.h even though nothing
actually requires it in that file. Move the clk.h include to the
C files that are actually using it and remove the clk.h include
from the header file. The clkdev.h include isn't used either, so
drop it too.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:11:07 -07:00
Stephen Boyd db00c3e595 clk: mvebu: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include the header if necessary. The
clkdev.h include isn't used here either, so drop it and add in
slab.h to keep things compiling.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 11:10:40 -07:00
Stephen Boyd 528b76976f clk: mmp: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, so drop
it and add in slab.h to keep things compiling.

Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:12 -07:00
Stephen Boyd c0eb1dfffc clk: meson8b: Properly include clk.h
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Only include clk.h if it's actually used.

Cc: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:10 -07:00
Stephen Boyd c726639bbe clk: mediatek: Properly include clk.h
We don't need to include clk.h in header files, just forward
declare struct clk here. This leads us to a few places where the
include of clk.h was missing in C files. Add them.

Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Henry Chen <henryc.chen@mediatek.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:09 -07:00
Stephen Boyd 059a1aa7eb clk: keystone: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:08 -07:00
Stephen Boyd 593438e44c clk: hisilicon: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also drop the clkdev.h include in files that
aren't using it.

Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:06 -07:00
Stephen Boyd 6063b663e8 clk: wm831x: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:05 -07:00
Stephen Boyd e266847013 clk: u300: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Also add in slab.h because without clkdev.h
compilation of this file would fail.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:04 -07:00
Stephen Boyd e873473cbc clk: twl6040: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:02 -07:00
Stephen Boyd 608f9b6e15 clk: si5351: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:01 -07:00
Stephen Boyd d74f864fec clk: rk808: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:53:00 -07:00
Stephen Boyd 39a3891576 clk: palmas: Remove clkdev.h includes
This driver includes clkdev.h even though it isn't used, so drop
it.

Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:58 -07:00
Stephen Boyd aa1a7fc4a9 clk: nomadik: Remove clk.h and clkdev.h includes
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. This driver also includes clkdev.h even though
it isn't used, so drop it too and add slab.h to make sure
everything still compiles.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:57 -07:00
Stephen Boyd e715e2b1a6 clk: mux: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:56 -07:00
Stephen Boyd 893418e407 clk: efm32gg: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:54 -07:00
Stephen Boyd a87b6866a0 clk: clps711x: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:53 -07:00
Stephen Boyd fc1699c802 clk: cdce706: Include clk.h
This clock provider uses the consumer API, so include clk.h
explicitly.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:52 -07:00
Stephen Boyd a1ff4588d7 clk: axi-clkgen: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:50 -07:00
Stephen Boyd 663724f990 clk: i.MX: Remove clk.h include
Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver.

Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:49 -07:00
Viresh Kumar da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Tony Lindgren 9cf705de06 ARM: OMAP2+: Add support for initializing dm814x clocks
Let's add a minimal clocks for dm814x to get it booted. This is
mostly a placeholder and relies on the PLLs being on from the
bootloader.

Note that the divider clocks work the same way as on dm816x and
am335x.

Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-16 02:09:33 -07:00
Tuomas Tynkkynen 79cf95c763 clk: tegra: Add the DFLL as a possible parent of the cclk_g clock
The DFLL clocksource was missing from the list of possible parents for
the fast CPU cluster. Add it to the list.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 10:40:20 +02:00
Tuomas Tynkkynen c38864a703 clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend
Save and restore this register since the LP1 restore assembly routines
fiddle with it. Otherwise the CPU would keep running on PLLX after
resume from suspend even when DFLL was the original clocksource.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 10:40:19 +02:00
Tuomas Tynkkynen 62a8a094b0 clk: tegra: Add Tegra124 DFLL clocksource platform driver
Add basic platform driver support for the fast CPU cluster DFLL
clocksource found on Tegra124 SoCs. This small driver selects the
appropriate Tegra124-specific characterization data and integration
code. It relies on the DFLL common code to do most of the work.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
[treding@nvidia.com: move setup code into ->probe()]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 10:39:45 +02:00
Paul Walmsley a3c83ff20c clk: tegra: Add DFLL DVCO reset control for Tegra124
The DVCO present in the DFLL IP block has a separate reset line,
exposed via the CAR IP block.  This reset line is asserted upon SoC
reset.  Unless something (such as the DFLL driver) deasserts this
line, the DVCO will not oscillate, although reads and writes to the
DFLL IP block will complete.

Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and
saving hours of debugging time.

Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
[ttynkkynen: ported to tegra124 from tegra114]
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
[mikko.perttunen: ported to special reset callback]
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 09:32:48 +02:00
Mikko Perttunen 66b6f3d074 clk: tegra: Introduce ability for SoC-specific reset control callbacks
This patch allows SoC-specific CAR initialization routines to register
their own reset_assert and reset_deassert callbacks with the common Tegra
CAR code. If defined, the common code will call these callbacks when a
reset control with number >= num_periph_banks * 32 is attempted to be asserted
or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32
are used to avoid clashes with low numbers that are automatically mapped to
standard CAR reset lines.

Each SoC with these special resets should specify the defined reset control
numbers in a device tree header file.

Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 09:32:47 +02:00
Tuomas Tynkkynen fa63aa3dea clk: tegra: Add functions for parsing CVB tables
Tegra CVB tables encode the relationship between operating voltage
and optimal frequency as a function of the so-called speedo value.
The speedo value is written to the on-chip fuses at the factory,
which allows the voltage-frequency operating points to be calculated
on an per-chip basis.

Add utility functions to parse the Tegra-specific tables and export the
voltage-frequency pairs to the generic OPP framework for other drivers
to use.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 09:32:47 +02:00
Tuomas Tynkkynen c4fe70ada4 clk: tegra: Add closed loop support for the DFLL
With closed loop support, the clock rate of the DFLL can be adjusted.

The oscillator itself in the DFLL is a free-running oscillator whose
rate is directly determined the supply voltage. However, the DFLL
module contains logic to compare the DFLL output rate to a fixed
reference clock (51 MHz) and make a decision to either lower or raise
the DFLL supply voltage. The DFLL module can then autonomously change
the supply voltage by communicating with an off-chip PMIC via either I2C
or PWM signals. This driver currently supports only I2C.

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 09:32:46 +02:00
Tuomas Tynkkynen d8d7a08fa8 clk: tegra: Add library for the DFLL clock source (open-loop mode)
Add shared code to support the Tegra DFLL clocksource in open-loop
mode. This root clocksource is present on the Tegra124 SoCs. The
DFLL is the intended primary clock source for the fast CPU cluster.

This code is very closely based on a patch by Paul Walmsley from
December (http://comments.gmane.org/gmane.linux.ports.tegra/15273),
which in turn comes from the internal driver by originally created
by Aleksandr Frid <afrid@nvidia.com>.

Subsequent patches will add support for closed loop mode and drivers
for the Tegra124 fast CPU cluster DFLL devices, which rely on this
code.

Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-16 09:32:44 +02:00
Frank Li 787b4271a6 clk: imx: add imx6ul clk tree support
Add imx6ul clock driver support.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Bai Ping <b51503@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-14 15:02:13 +08:00
Stephen Boyd 86665d2897 clk: st: Fix error paths and allocation style
The error paths in this file leak memory and mappings and test
for pointers being valid after dereferencing them. Fix these
problems and properly free resources on errors. Fix some
stylistic things too like using sizeof(*ptr) and fitting more
code on a single line. Note that we don't unregister clocks here.
That needs a clk_composite_unregister() API that we don't have
right now.

Acked-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Cc: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-13 17:12:31 -07:00
Fabio Estevam 05e062f92c clk: imx: clk-imx6q: Provide initial IPU clock settings for mx6dl
Currently it is not possible to use HDMI and LVDS at the same time on a
imx6dl-sabresd board.

Fix this usecase by setting IMX6QDL_CLK_PLL3_PFD1_540M to 540MHz and
also by setting it as the parent of IMX6QDL_CLK_IPU1_SEL.

Based on the configuration done in the FSL kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-13 16:35:30 +08:00
Linus Torvalds 4322f02847 A small set of fixes for problems found by smatch in new drivers
that we added this rc and a handful of driver fixes that came in
 during the merge window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJVoDbjAAoJENidgRMleOc98WkP/05EgvPc/S6FUBKpkZ9aRHMJ
 cdFQ7anxcESj4rQo/AV2TQGiHBBqYLEmBt7Bf7LfbWfKu4OC3510PKBjbpsxteQG
 mWLNKtDoqlqSBN2wC883HbJFEKb6cMN0IMGzT/zwaolrePfDinjPv/KQsg0eh16Q
 nFcgZX0HAgoAHoJG5Kl0pPt5aGrbM0/PdtETasDf5EK9l6UUQmQfHKLfDY/OXO+T
 2QD28aeL/FChqQ4MEGNApy0p8fdQPs8sZet48AIz0c9Frjsu4rlXuU0QAJ+jP2Ag
 sjq/JaC/bwFnhAqy0vnUtYUFQpf075D4/FZ9AcrFzVpHfu3xJBCJWFvv47zJEvdX
 iwunJe7FopCA2/va13RyUQgVzEqGDolipcbsq/ZONTwnAI/Vc2mvX3jEnDAWiejS
 BeBzaOa9gKBuVG/Jyl1vXLoDPlEauBGmz8JmNA8wF9wW8Svlw7KKwfpjN0vlHoL/
 CYuDIeZiUXaSe4WhxuAsOkHow2PgY+QupbId7rq7WEDPm0UyEuYMHMcKAbpF74d+
 zD/dZBwPs2vfsmCYLCKZrDULYeHLTEPjpOf13x40IAyTvKiMsVj07eAnGCbrP1CS
 /Tj7dCBSfyuwH6XMjVh0QGMNBdTC5DMqhG2aR4eRHrNXVkNVp6ty/CL7EgF/FrWl
 qDW2dMoi3XVkz6rE2Mvb
 =vTi8
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A small set of fixes for problems found by smatch in new drivers that
  we added this rc and a handful of driver fixes that came in during the
  merge window"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  drivers: clk: st: Incorrect register offset used for lock_status
  clk: mediatek: mt8173: Fix enabling of critical clocks
  drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks
  drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks
  drivers: clk: st: Fix flexgen lock init
  drivers: clk: st: Fix FSYN channel values
  drivers: clk: st: Remove unused code
  clk: qcom: Use parent rate when set rate to pixel RCG clock
  clk: at91: do not leak resources
  clk: stm32: Fix out-by-one error path in the index lookup
  clk: iproc: fix bit manipulation arithmetic
  clk: iproc: fix memory leak from clock name
2015-07-11 11:08:21 -07:00
Kevin Hilman d024bae2c4 Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
 A33 boot properly.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVmUC5AAoJEBx+YmzsjxAgc24P/Ah6q+SSSv68adzGQp6LGO8t
 ru2OWZwlQn+w2gHJK9qAytmQdpSRqbbjB+8muLz9WwNNjHliDmJawUvBPdC2p03L
 ZrugiVUSKBeQOzdqvG0B3vOO3xszDE06DA+i0PZaBWH2uXDVfohhCFQ2n2/oQsS7
 eDSlBl1EHtZOKEHtuEi988YDJhYDnJeSG/SWwyUbW73QH5eYYl+9TnSXdwDKGmJS
 JyfWkafIsI3EKWUYmOJ2NgUv13pYQU9k/we53n+PxeGevsPuenJH8r2j/N8pWtUl
 srfZP82aEYCqlY4M6QL21k2KOPW8MIDMOOk9dh8l8k9nSC2oJXqsROJQpw2nrJRo
 oPoT+gxWacc+AutX3Hz+XjXNsCIsE3q0Yd7yBfiszXroPtkIBslJGhdJRbh3VrxO
 JS7lKVubJepePpARiWT4ginenWPgGPirDHWixSUcfgBnMN6fpdhOGpdDxWePy1IJ
 7wox3lRThnBhhvI1HuLES92XEiRYhin21LA00juPbvCMbQKuG2W9fBryXTi3U3LC
 g3RQfy3ViZbrEw/7iTjlm2MVYSRxSdA1SAQHNS5Q+4fem22XKeSlzHON/0izrCdV
 10zWNUAlolESWhCyD3TMScFl7WG+KMrjaHE/02+q7wSA6sr1aMGfjL6buVA7R5bF
 KiCWz4Sqp8p/a4RejDVl
 =m0CY
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes

Merge "Allwinner late changes for 4.2" from Maxime Ripard:

Allwinner late changes for 4.2

A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.

* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: Enable simplefb in the defconfig
  ARM: Remove deprecated symbol from defconfig files
  ARM: sunxi: Add Machine support for A33
  ARM: sunxi: Introduce Allwinner H3 support
  Documentation: sunxi: Update Allwinner SoC documentation
2015-07-09 15:08:44 -07:00
Stephen Boyd f04b8b48d3 Merge branch 'clk-fixes' into clk-next
* clk-fixes:
  drivers: clk: st: Incorrect register offset used for lock_status
2015-07-07 17:20:07 -07:00
Stephen Boyd 2573a02aa5 clk: Move clk_provider_list to scope of function using it
The list isn't used after of_clk_init() is called, so we don't
need to keep an empty list around after init. Put the list on the
stack.

Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:20:05 -07:00
Stephen Boyd 2e3b19f137 clk: Check for allocation errors in of_clk_init()
Dan Carpenter reports that we don't check the allocation here for
failure. Add a failure check and free any previously allocated
providers from the clk_provider_list.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:20:03 -07:00
Stephen Boyd ca7d07a22a Merge branch 'clk-rk3368' into clk-next
* clk-rk3368:
  clk: rockchip: add rk3368 clock controller
  clk: rockchip: add missing include guards
  clk: rockchip: add dt-binding header for rk3368
  dt-bindings: add documentation of rk3668 clock controller
  clk: rockchip: define the inverters of rk3066/rk3188 and rk3288
  clk: rockchip: fix issues in the mmc-phase clock
  clk: rockchip: add support for phase inverters
  clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variant
  clk: rockchip: protect register macros against multipart values
  clk: rockchip: fix faulty vip parent name on rk3288
  clk: rockchip: rk3288: add CLK_SET_RATE_PARENT to sclk_mac
2015-07-07 17:20:00 -07:00
Georgi Djakov d4f76de374 clk: qcom: Add support for SR2 PLLs
Add support for SR2 type pll operations. SR2 is optimized for Time Interval
Error (TIE) or absolute jitter.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:19:58 -07:00
Stephen Boyd a8a8db4799 clk: at91: Silence warnings and cleanup __init/extern usage
Remove useless ifdefs around function prototypes to silence the
following sparse warnings when the configs aren't enabled.

drivers/clk/at91/clk-h32mx.c:95:13: warning: symbol
'of_sama5d4_clk_h32mx_setup' was not declared. Should it be
static?
drivers/clk/at91/clk-utmi.c:159:13: warning: symbol
'of_at91sam9x5_clk_utmi_setup' was not declared. Should it be
static?

Plus, using __init and extern in function prototypes doesn't do
anything, so just drop it throughout this file.

Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 17:19:31 -07:00
Pankaj Dev 56551da925 drivers: clk: st: Incorrect register offset used for lock_status
Incorrect register offset used for sthi407 clockgenC

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Fixes: 51306d56ba ("clk: st: STiH407: Support for clockgenC0")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07 16:05:08 -07:00
Georgi Djakov adb11a40a3 clk: qcom: Constify the parent names arrays
Make const both the array and the strings, so they can be
moved to .rodata section.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 17:20:59 -07:00
Matthias Brugger 78e50c6def clk: xgene: Delete duplicated name field
X-Gene clocks implement it's name in the clock private struct.
This is a duplication of the name field. We can delete the field
and rely on the common implementation to retrieve the name.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 17:20:57 -07:00
Sergej Sawazki bb68a4f1e5 clk: Rename clk-gpio-gate.c to clk-gpio.c
The file clk-gpio-gate.c does not only contain the gate clock, but also
the mux clock. Rename the file to clk-gpio.c.

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 17:20:55 -07:00
Sergej Sawazki 80eeb1f0f7 clk: add gpio controlled clock multiplexer
Add a common clock driver for basic gpio controlled clock multiplexers.
This driver can be used for devices like 5V41068A or 831721I from IDT
or for discrete multiplexer circuits. The 'select' pin selects one of
two parent clocks.

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
[sboyd@codeaurora.org: Fix error paths to free memory and do it
in the correct order]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 17:20:52 -07:00
Sergej Sawazki 281cbb0076 clk: gpio-gate: Stay silent on EPROBE_DEFER
Do not output an error message if requesting gpio failes with EPROBE_DEFER.

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:55:07 -07:00
Sergej Sawazki e21b08e2f3 clk: gpio-gate: Include export.h instead of module.h
Include export.h for EXPORT_SYMBOL_GPL, no need to include module.h.

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sergej Sawazki <ce3a@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:55:06 -07:00
Stephen Boyd f75073fabd Merge branch 'clk-fixes' into clk-next
* clk-fixes:
  clk: mediatek: mt8173: Fix enabling of critical clocks
  drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks
  drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks
  drivers: clk: st: Fix flexgen lock init
  drivers: clk: st: Fix FSYN channel values
  drivers: clk: st: Remove unused code
  clk: qcom: Use parent rate when set rate to pixel RCG clock
  clk: at91: do not leak resources
  clk: stm32: Fix out-by-one error path in the index lookup
  clk: iproc: fix bit manipulation arithmetic
  clk: iproc: fix memory leak from clock name
2015-07-06 15:54:58 -07:00
Sascha Hauer 7b2a4635b8 clk: mediatek: mt8173: Fix enabling of critical clocks
On the MT8173 the clocks are provided by different units. To enable
the critical clocks we must be sure that all parent clocks are already
registered, otherwise the parents of the critical clocks end up being
unused and get disabled later. To find a place where all parents are
registered we try each time after we've registered some clocks if
all known providers are present now and only then we enable the critical
clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
[sboyd@codeaurora.org: Marked function and data __init]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:54:13 -07:00
Heiko Stuebner 3536c97a52 clk: rockchip: add rk3368 clock controller
Describe the clock tree and software resets of the rk3368 ARM64 SoC

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:09:22 -07:00
Heiko Stuebner 4534b1113e clk: rockchip: define the inverters of rk3066/rk3188 and rk3288
Both soc series' have inverters on the hsadc and camera interface clock
paths. So define them using the newly added inverter type.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:07:40 -07:00
Heiko Stuebner 7c494ad058 clk: rockchip: fix issues in the mmc-phase clock
The review for the new inverter clock type uncovered some issues (missing
headers and name handling) that are also present in the mmc-phase clock
type, I got (to much) inspiration from. Fix these there too.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:07:38 -07:00
Heiko Stuebner 8a76f443a9 clk: rockchip: add support for phase inverters
Most Rockchip socs have optional phase inverters connected to some
clocks that move the clock-phase by 180 degrees.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Dropped lazy part of commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:04:40 -07:00
Heiko Stuebner 6f08507253 clk: rockchip: add COMPOSITE_NOGATE_DIVTBL variant
A clock branch consisting of a mux and divider with non-standard
divider values.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:03:25 -07:00
Heiko Stuebner 2d7884a7d0 clk: rockchip: protect register macros against multipart values
The macros calculate the correct offset from the id in the parameter.
If this parameter does not consist of a single number, the calculation
will return wrong registers in the best case or create unaligned accesses
in the worst case. So protect the calculations against such values.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:03:24 -07:00
Heiko Stuebner 101762976b clk: rockchip: fix faulty vip parent name on rk3288
The video input processor (vip) was called camera interface (cif) on
older socs which seems to have resulted in a copy'n'paste error when
creating the rk3288 camera clocks.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:03:23 -07:00
Heiko Stuebner 4791eb61db clk: rockchip: rk3288: add CLK_SET_RATE_PARENT to sclk_mac
The dwmac ethernet controller on the rk3288 supports phys connected
via rgmii and rmii. With rgmii phys it is expected that the mac clock
is provided externally while with rmii phys the clock can be external
but also generated from the plls. In the later case it of course needs
be at 50MHz, which gets set from the dwmac_rk driver.
As most devices use a rgmii phy it never surfaced so far that the mac
clk mux, doesn't go up one lever to the pll clock in the rmii case with
internal clock generation, as it is missing the CLK_SET_RATE_PARENT flag,
and thus will not set the correct frequency in most cases.

Fixes: b9e4ba5416 ("clk: rockchip: add clock controller for rk3288")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 15:03:23 -07:00
Gabriel Fernandez 3be6d8ce63 drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks
This patch fixes the mux bit-setting for ClockgenA9.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Fixes: 13e6f2da1d ("clk: st: STiH407: Support for A9 MUX Clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:25:42 -07:00
Pankaj Dev 18fee4538f drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks
Add the CLK_GET_RATE_NOCACHE flag to all the clocks with recalc ops,
so that they reflect Hw rate after CPS wake-up when a clk_get_rate()
is called

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:25:40 -07:00
Giuseppe Cavallaro 0f4f2afd44 drivers: clk: st: Fix flexgen lock init
While proving lock, the following warning happens
and it is fixed after initializing lock in the setup
function

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.27-02861-g39df285-dirty #33
[<c00154ac>] (unwind_backtrace+0x0/0xf4) from [<c0011b50>] (show_stack+0x10/0x14)
[<c0011b50>] (show_stack+0x10/0x14) from [<c00689ac>] (__lock_acquire+0x900/0xb14)
[<c00689ac>] (__lock_acquire+0x900/0xb14) from [<c0069394>] (lock_acquire+0x68/0x7c)
[<c0069394>] (lock_acquire+0x68/0x7c) from [<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c)
[<c04958f8>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<c0381e6c>] (clk_gate_endisable+0x28/0x88)
[<c0381e6c>] (clk_gate_endisable+0x28/0x88) from [<c0381ee0>] (clk_gate_enable+0xc/0x14)
[<c0381ee0>] (clk_gate_enable+0xc/0x14) from [<c0386c68>] (flexgen_enable+0x28/0x40)
[<c0386c68>] (flexgen_enable+0x28/0x40) from [<c037f260>] (__clk_enable+0x5c/0x9c)
[<c037f260>] (__clk_enable+0x5c/0x9c) from [<c037f558>] (clk_enable+0x18/0x2c)
[<c037f558>] (clk_enable+0x18/0x2c) from [<c064a1dc>] (st_lpc_of_register+0xc0/0x248)
[<c064a1dc>] (st_lpc_of_register+0xc0/0x248) from [<c0649e44>] (clocksource_of_init+0x34/0x58)
[<c0649e44>] (clocksource_of_init+0x34/0x58) from [<c0637ddc>] (sti_timer_init+0x10/0x18)
[<c0637ddc>] (sti_timer_init+0x10/0x18) from [<c06343f8>] (time_init+0x20/0x30)
[<c06343f8>] (time_init+0x20/0x30) from [<c0632984>] (start_kernel+0x20c/0x2e8)
[<c0632984>] (start_kernel+0x20c/0x2e8) from [<40008074>] (0x40008074)

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Fixes: b116517055 ("clk: st: STiH407: Support for Flexgen Clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:25:39 -07:00
Gabriel Fernandez c4d339c69f drivers: clk: st: Fix FSYN channel values
This patch fixes the value for disabling the FSYN channel clock.
The 'is_enabled' returned value is also fixed.

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:25:38 -07:00
Gabriel Fernandez c14bada8f7 drivers: clk: st: Remove unused code
Remove this duplicated code due to a bad copy / paste.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:25:36 -07:00
Hai Li 6d451367bf clk: qcom: Use parent rate when set rate to pixel RCG clock
Since the parent rate has been recalculated, pixel RCG clock
should rely on it to find the correct M/N values during set_rate,
instead of calling __clk_round_rate() to its parent again.

Signed-off-by: Hai Li <hali@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
[sboyd@codeaurora.org: Silenced unused parent variable warning]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06 12:24:51 -07:00
Vishnu Patekar 159870d241 ARM: sunxi: Add Machine support for A33
Add machine support for the Allwinner A33 quad core cortex-a7 based SoC,
which is similar to the A23 SoC.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Chen-Yu Tsai <wens@csie.org>
2015-07-05 16:33:55 +02:00
Linus Torvalds 75462c8a87 Replace module_platform_driver with builtin_platform driver in non modules.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO9lAAoJEOvOhAQsB9HWRV4P/jYrQm/S14ZfbwzqwV2w5xh+
 E1SHk+kjcLyIvG6JXknp8mlNFGFhsIZNhTq8wvYBmFHlkop9jlMqT3IwaV7y9baV
 NmxltPHVIgFhnPMBF6+nvMJVFe0oBXh3adwc02h/LcXauEPK98Na/BtAfX5nxmoy
 DO/9R+R3SxqShSHvQqM6JNu3M/xAxU7RRSMsthF3nZJfZEm5i7Sl9w6Zcmu67gEn
 KbAPmthHSzDvJZGPt6xQiR2OPvhdA2Ddxjey0/cLyl/IVd2DdUTUUHDY0lUpPd3A
 Ba6C6OaWoHbCoAVzGvXEJLP1CfuF5upTmo53FZ2+1fERzX7Co4E2xInq6qkpWK5+
 cLcqCZaxHXvmvmidrfTaJQ52dLseGAH5KsiDoR8m5RcsCMrK367V6ja5/A2UG+xW
 FVJzU7/1LRHzw17si/AcrD0Q3hFR0n6klEGS3E964fsyOuCYlSc77IspxZ7nF4QW
 cFKKweyAUdrmrlduS7rKxX4z/ne4ljbR1M82YxFVPWqg/n2cqQ4e9RQFeK8ogBe6
 ASXu6pmz03X5xoD7xPQEsVzjDDGPzGFdD/601j9cRJ0+TR9udECP776gXt+5Ml0L
 jWlhVGbt7BN64UFZ/kInGo1h6cS+JjlrBfNq6eZVQP78bZ5UWdyiupGzcLcixefN
 bnkl2MHHY/d6yk2Rs7zh
 =WLBw
 -----END PGP SIGNATURE-----

Merge tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_platform_driver replacement from Paul Gortmaker:
 "Replace module_platform_driver with builtin_platform driver in non
  modules.

  We see an increasing number of non-modular drivers using
  modular_driver() type register functions.  There are several downsides
  to letting this continue unchecked:

   - The code can appear modular to a reader of the code, and they won't
     know if the code really is modular without checking the Makefile
     and Kconfig to see if compilation is governed by a bool or
     tristate.

   - Coders of drivers may be tempted to code up an __exit function that
     is never used, just in order to satisfy the required three args of
     the modular registration function.

   - Non-modular code ends up including the <module.h> which increases
     CPP overhead that they don't need.

   - It hinders us from performing better separation of the module init
     code and the generic init code.

  So here we introduce similar macros for builtin drivers.  Then we
  convert builtin drivers (controlled by a bool Kconfig) by making the
  following type of mapping:

    module_platform_driver()       --->  builtin_platform_driver()
    module_platform_driver_probe() --->  builtin_platform_driver_probe().

  The set of drivers that are converted here are just the ones that
  showed up as relying on an implicit include of <module.h> during a
  pending header cleanup.  So we convert them here vs adding an include
  of <module.h> to non-modular code to avoid compile fails.  Additonal
  conversions can be done asynchronously at any time.

  Once again, an unused module_exit function that is removed here
  appears in the diffstat as an outlier wrt all the other changes"

* tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver
  drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver
  drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver
  drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver
  drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver
  drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver
  drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver
  platform_device: better support builtin boilerplate avoidance
2015-07-02 10:42:13 -07:00
Linus Torvalds 2d4407079c Replace module_init with equivalent device_initcall in non modules.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO5XAAoJEOvOhAQsB9HWe4cQAJcsmSXIDN2O6oxvgH8Wilof
 EIEMvT13uwBdsjQdYUY6A6B3iUV9wzEEgoosg/JRgpz5/b1FTDMIO4arUPD3Lcak
 5bmyVO2qAT+yaLAWSgn6I8DMplXrKiEuK+TkH/mW3p9TdvElLdG3Vg6UI407hSWv
 W0QbVwkNtv8XmzshV9F2YdmflT8j1PgYxIu/tEkVOWn37DNW+Fp2OVBrdTIYp3AJ
 X6bYZPEcQDCrWWW/s2GmIDrNgryiebasns+CAgGY21262jAYaRcFOJmR47AsTqW7
 DSZXIlLc/gJca++hfxqV15RZ4NRHxrebCypTsPtZUV7ZiYHI726eeUZzxsp/9itu
 mvhmi+aQUTTUP3dDhiv05f4syAKEb4zslT6SLwcna6oi09M97HfCeQsHqhcFq/MG
 KnS2JJoJQToQtJvMUXMQzp5hyHjNlOclIvCxEiL32EZU54PeJOKasy/mptNGEctk
 TxACWvoXBQglRaVN+1wIjjr0BaHJSuJa9CUnIfM4WZdSHiMQMx00XLTkZcTnSM6R
 12pE54vVolrXswGPJhy4W/Sf1yPSW1tkWSVBbkKLyCIrlAWJtu68rXhvwhG/nz6E
 3g6QrDEQGlk6bzUH4CJCEqXLPRN1bNS0XjdkEFh60Lury3Ns5yHKZXPW5vCQ5csr
 FQNUyBs595CWbJNfbn1n
 =0BDx
 -----END PGP SIGNATURE-----

Merge tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part one from Paul Gortmaker:
 "Replace module_init with equivalent device_initcall in non modules.

  This series of commits converts non-modular code that is using the
  module_init() call to hook itself into the system to instead use
  device_initcall().

  The conversion is a runtime no-op, since module_init actually becomes
  __initcall in the non-modular case, and that in turn gets mapped onto
  device_initcall.  A couple files show a larger negative diffstat,
  representing ones that had a module_exit function that we remove here
  vs previously relying on the linker to dispose of it.

  We make this conversion now, so that we can relocate module_init from
  init.h into module.h in the future.

  The files changed here are just limited to those that would otherwise
  have to add module.h to obviously non-modular code, in order to avoid
  a compile fail, as testing has shown"

* tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  MIPS: don't use module_init in non-modular cobalt/mtd.c file
  drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
  cris: don't use module_init for non-modular core eeprom.c code
  tty/metag_da: Avoid module_init/module_exit in non-modular code
  drivers/clk: don't use module_init in clk-nomadik.c which is non-modular
  xtensa: don't use module_init for non-modular core network.c code
  sh: don't use module_init in non-modular psw.c code
  mn10300: don't use module_init in non-modular flash.c code
  parisc64: don't use module_init for non-modular core perf code
  parisc: don't use module_init for non-modular core pdc_cons code
  cris: don't use module_init for non-modular core intmem.c code
  ia64: don't use module_init in non-modular sim/simscsi.c code
  ia64: don't use module_init for non-modular core kernel/mca.c code
  arm: don't use module_init in non-modular mach-vexpress/spc.c code
  powerpc: don't use module_init in non-modular 83xx suspend code
  powerpc: use device_initcall for registering rtc devices
  x86: don't use module_init in non-modular devicetree.c code
  x86: don't use module_init in non-modular intel_mid_vrtc.c
2015-07-02 10:30:48 -07:00
Linus Torvalds 9d86b4128c Fix up implicit <module.h> users that will break later.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkO2uAAoJEOvOhAQsB9HWOT0P/jvFrpj2iuWqdMcvBuMdlx6K
 /9qiMsOStbxmbmjj3RsbFCkeHJMUBCI0ZVrIosdEyeZWx33fHkZJisvN1i1PMA63
 qppcZtkGxSmCOi6+e9k+qZNBvKBWy2oCXyLx7zaUKkWuR7wGe9488+9dqd9x+/gu
 i/HTvf8Omrukwko2a0omWUSmUimhveb/hQ7Vxc/M9lbxFeO3jMabV5ZzgfnoTTrh
 Rd2zo4kGbhj8nxonCUHgamnk6hoTE3KYhBPvqohzTDSTALmZVxhCwaQzQWzq+kdl
 oSLa+tik508/csh98tN9dlMkJReHlDNdJIbfazQ1vHI00T5PsQELexFT02iKBhS7
 5mdHSPp5P1TgGB6Fk3lN+hVO6Ja0S/vmJUi72M2y5DPd55lnvOaCVuqzWIJTYOoN
 tqllBH4WIz27hsJWiMLgkJQaDxfBFYx104tOq56s5SeOthBluSE2xoNDrzZGyvRh
 NeVza4ccgxIj0p2xfgeErx89r4GSCNk/LakpcMJReaT7ri23mTCDZJNLMcVW7BYm
 2MW6M3LF748eN3P2YyNnU+TeQNpIho4whuwfOV+uR4tpdd5MtMaObWimwxBN7URM
 LeW3gIwsZFHxYU9NLeZoQZVi6gDmaVe7ma82AbHXaV/mQVYsSP9M6gCO+FASCTGt
 Rz6Nyl4/Ns8rdXUoOud8
 =qotW
 -----END PGP SIGNATURE-----

Merge tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull implicit module.h fixes from Paul Gortmaker:
 "Fix up implicit <module.h> users that will break later.

  The files changed here are simply modular source files that are
  implicitly relying on <module.h> being present.  We fix them up now,
  so that we can decouple some of the module related init code from the
  core init code in the future.

  The addition of the module.h include to several files here is also a
  no-op from a code generation point of view, else there would already
  be compile issues with these files today.

  There may be lots more implicit includes of <module.h> in tree, but
  these are the ones that extensive build test coverage has shown that
  must be fixed in order to avoid build breakage fallout for the pending
  module.h <---> init.h code relocation we desire to complete"

* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
  drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
  drivers/staging: include <module.h> for modular android tegra_ion code
  crypto/asymmetric_keys: pkcs7_key_type needs module.h
  sh: mach-highlander/psw.c is tristate and should use module.h
  drivers/regulator: include <module.h> for modular max77802 code
  drivers/pcmcia: include <module.h> for modular xxs1500_ss code
  drivers/hsi: include <module.h> for modular omap_ssi code
  drivers/gpu: include <module.h> for modular rockchip code
  drivers/gpio: include <module.h> for modular crystalcove code
  drivers/clk: include <module.h> for clk-max77xxx modular code
2015-07-02 10:25:22 -07:00
David Dueck c76a024e82 clk: at91: do not leak resources
Do not leak memory and free irqs in case of an error.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:51:50 -07:00
Daniel Thompson 15ab38273d clk: stm32: Fix out-by-one error path in the index lookup
If stm32f4_rcc_lookup() is called with primary == 0 and secondary == 192
then it will read beyond the end of the table array due to an out-by-one
error in the range check.

In addition to the fixing the inequality we also modify the r.h.s. to
make it even more explicit that we are comparing against the size of
table in bits.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Fixes: 358bdf892f ("clk: stm32: Add clock driver for STM32F4[23]xxx devices")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:51:26 -07:00
Ray Jui 69916d9609 clk: iproc: fix bit manipulation arithmetic
A 32-bit variable should be type casted to 64-bit before arithmetic
operation and assigning it to a 64-bit variable

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:51:09 -07:00
Ray Jui 45a481c217 clk: iproc: fix memory leak from clock name
of_property_read_string_index takes array of pointers and assign them to
strings read from device tree property. No additional memory allocation
is needed prior to calling of_property_read_string_index. In fact, since
the array of pointers will be re-assigned to other strings, any memory
that it points to prior to calling of_property_read_string_index will be
leaked

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02 09:50:26 -07:00
Linus Torvalds 5f1201d515 The changes to the common clock framework for 4.2 are dominated by new
drivers and updates to existing ones, as usual. There are some fixes to
 the framework itself and several cleanups for sparse warnings, etc.
 Please consider pulling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVlCubAAoJEKI6nJvDJaTUJ3cQAKdaU+NpWX9Qajt6snIHcqB6
 nBg57DltuPh1XFMPHDIdPe+8rK0RDQjao6jwzzqUKGaZJ3sycPCIn8mh+iZCP7Se
 yxhacQIAIp2qbIlIQ8Epcc6jnma/8cUyfB0BuYMddzb7bk2PXLfLxzJgAo5pXZM1
 LQoBxdpBh3Y7vcdBFLuHsnORTZdRI29Nu7p5dRK27vxWFBoCqL3bshHSS8g7lTBc
 XUWcFhfFe7WvMvBqqF8pSJlCmHzO90S0MmFPT4OQy4NtAysPpjsqI6RPCHBTyvy+
 oniMM6zM/RdN1VnLB49HvAL4mArjAdsQGxNywsUpvD/IcZPbpM8N3VA3xHzANMfy
 iJ9374zgjRn3/YBfjYFCcyVUY7SPeiRsXh97ZMZJGY5BC5FbXuKMn3STPrUilhw/
 CMSq9ARdmjlPQDW5EuEGFeap+7oz4q4Kgk0qgmOktIVYhtt9Pn0ddMKINIpokzbi
 4w0z1kc/YVHZpFMNYxAQoxYzejU9hxybUvYUEnu9RFzzOW+o7DsmMv7k5r1XY+oO
 P1Kz0jVWCw46XnvP6z1V4SforZOQXr1Om698O8fd7ke7Q7gFCr2UQjIuXliC/g8u
 NREqu1kceXTeWnt0LFZB7GMOo2Edo21qYIAILyqTO50QJL2at5WLoibaM03y7I7x
 GeMP1APDHJI0E5dn0v5P
 =Iv72
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clock framework updates from Michael Turquette:
 "The changes to the common clock framework for 4.2 are dominated by new
  drivers and updates to existing ones, as usual.

  There are some fixes to the framework itself and several cleanups for
  sparse warnings, etc"

* tag 'clk-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (135 commits)
  clk: stm32: Add clock driver for STM32F4[23]xxx devices
  dt-bindings: Document the STM32F4 clock bindings
  cpufreq: exynos: remove Exynos4210 specific cpufreq driver support
  ARM: Exynos: switch to using generic cpufreq driver for Exynos4210
  clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock
  clk: samsung: add infrastructure to register cpu clocks
  clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support
  doc: dt: add documentation for lpc1850-ccu clk driver
  clk: add lpc18xx ccu clk driver
  doc: dt: add documentation for lpc1850-cgu clk driver
  clk: add lpc18xx cgu clk driver
  clk: keystone: add support for post divider register for main pll
  clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED
  clk: cygnus: remove Cygnus dummy clock binding
  clk: cygnus: add clock support for Broadcom Cygnus
  clk: Change bcm clocks build dependency
  clk: iproc: add initial common clock support
  clk: iproc: define Broadcom iProc clock binding
  MAINTAINERS: update email for Michael Turquette
  clk: meson: add some error handling in meson_clk_register_cpu()
  ...
2015-07-01 19:22:00 -07:00
Linus Torvalds 78c10e556e Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...
2015-06-27 12:44:34 -07:00
Linus Torvalds f5dcb68086 ARM: SoC: driver updates for v4.2
Some of these are for drivers/soc, where we're now putting
 SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 Some highlights:
 
 - simple-mfd: document DT bindings and misc updates
 - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
 - memory: support for Tegra132 SoC
 - memory: introduce tegra EMC driver for scaling memory frequency
 - misc. updates for ARM CCI and CCN busses
 
  Conflicts:
 	arch/arm64/boot/dts/arm/juno-motherboard.dtsi
 
  Trivial add/add conflict with our dt branch.
  Resolution: take both sides.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RRAAoJEFk3GJrT+8ZljIcQAIsqxM/o0drd90xTJ6ex9h0B
 RmqVLTDgesHmBacJ+SBsa9/ybFIM1uErByftc1dmKankEQVXW3wcH7keQnoStPT2
 zTEjadHgZ/ARYjV/oG5oohjfDZpO1kECVHL8O8RmcWxgzRB3az1IW2eD+dzrga/Y
 R7K6D8rDHMADIUmv0e0DzvQEbSUYdCx3rBND1qZznwZDP3NoivLkOG5MTraccLbQ
 ouCRoZtyNYD5Lxk+BHLBepnxAa0Ggc6IjEmiUv8fF2OYdu0OruMliT4rcAtOSmzg
 2Y7pP85h8u0CxbJDkOyc+2BELyKo7Hv97XtDNNbRYABTMXdskRIadXt4Sh4mwFtM
 nvlhB4ovbIX7noECJToEkSAgmStLSUwA3R6+DVdLbeQY4uSuXuTRhiWHMyQB6va9
 CdjJDk2RE0dZ77c5ZoUnUDtBe4cULU/n4agpYkKMf/HcpnqMUwZzP4KZbbPMBpgL
 0CVTt3YrEcjoU7g0SFHhOGPSgl4yIXKU2eHEscokyFYLrS5zRWepmUEmlSoaWn+W
 p7pJE65TvOGf2xbaWI+UBeK/3ZG7XAP8qUfhsi7NS4bV6oFCk/foqsWAuru0H7OW
 2Gk8fuF0qLgE1eFWQp8BHZ4IUeytoWbnGhhHXh8zH39SKAVncOiAGDNfuEP9CyXJ
 fZFfruYrnz2emOwj2v9m
 =02Gm
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...
2015-06-26 11:54:29 -07:00
Linus Torvalds 4aa705b18b ARM: SoC: platform support for v4.2
Our SoC branch usually contains expanded support for new SoCs and
 other core platform code. Some highlights from this round:
 
 - sunxi: SMP support for A23 SoC
 - socpga: big-endian support
 - pxa: conversion to common clock framework
 - bcm: SMP support for BCM63138
 - imx: support new I.MX7D SoC
 - zte: basic support for ZX296702 SoC
 
  Conflicts:
 	arch/arm/mach-socfpga/core.h
 
 Trivial remove/remove conflict with our cleanup branch.
 Resolution: remove both sides
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RMAAoJEFk3GJrT+8Zl6/kP/1Rv9O++1Kxua6R54Og6AF1J
 0miFr2fnUrUWUYg/NVbseRH5bBe6N6ir3SQMfde8W2/QibEjOoEwSwrle+mC/eiq
 CE0x0gtyRvXMrMU/FWkOvbmmw9uv5oz1z3IHZV6AiecNuSMLUBPfamryikQ8C+d1
 O/QZtX543tJQJDOBihO5cuhoVVM37UX0unNmqGsyswlyqTPF8FxcIJAYVNtnxjmj
 AFaOB0nDJKLKFTiX2Ype2wOxxJX1lrLatNo4W4T+YaaK+i1uCOhgTdSN+n49K7YA
 KNDFEgZFQqT8VMJyG+eJVeYF+cI7yWQ7lBzIftPUjPk/7+dIHBjWPz2QdjVz3U38
 kxncf4S9xGAF5G2rcKe4mFrfT3Y8QLWQpA/jFs06yLwW1O3Hlfq3DzMdGNcF7hth
 17LOP8namn9+NepZEp/vAlFzRRypxWWtbkPNBIItkImC6zn0IiGjBy50DE1io27W
 hmQcnMb7d+0wWl2Y8OmR2lZSB97JiRZkRYMCVHVt+0zGJzp4prLvl9wbjh1VXkPv
 ERCDJ9nCmZsl7ZVmIXMI7KNXYuPNp7R/QAzCvuSUueswF0qxTAQ0VSSBwRMqvQsQ
 UUNC6p63VnjUeMUdn2EBsUQZ0Uqw3t2U5TtvooHNt9FkiGsSpwjWrvVD+LItaPoJ
 GPeeJrJaYQsDvTrO8wjU
 =ZtPK
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform support updates from Kevin Hilman:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  Some highlights from this round:

   - sunxi: SMP support for A23 SoC
   - socpga: big-endian support
   - pxa: conversion to common clock framework
   - bcm: SMP support for BCM63138
   - imx: support new I.MX7D SoC
   - zte: basic support for ZX296702 SoC"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits)
  ARM: zx: Add basic defconfig support for ZX296702
  ARM: dts: zx: add an initial zx296702 dts and doc
  clk: zx: add clock support to zx296702
  dt-bindings: Add #defines for ZTE ZX296702 clocks
  ARM: socfpga: fix build error due to secondary_startup
  MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS
  ARM: ep93xx: simone: support for SPI-based MMC/SD cards
  MAINTAINERS: update Shawn's email to use kernel.org one
  ARM: socfpga: support suspend to ram
  ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10
  ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5
  ARM: EXYNOS: register power domain driver from core_initcall
  ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs
  ARM: SAMSUNG: Constify platform_device_id
  ARM: EXYNOS: Constify irq_domain_ops
  ARM: EXYNOS: add coupled cpuidle support for Exynos3250
  ARM: EXYNOS: add exynos_get_boot_addr() helper
  ARM: EXYNOS: add exynos_set_boot_addr() helper
  ARM: EXYNOS: make exynos_core_restart() less verbose
  ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout
  ...
2015-06-26 11:34:35 -07:00
Linus Torvalds 55a7d4b85c h8300 pull request for 4.2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVi5eKAAoJEEdC8EELKDmcZWoQANh4UC+JGcP3XJ+AWyJpX1Rg
 VQMmSAiF/QZr3ty9sbU/6v3pNK5B1s2etY7lWzzCsp7GMhYln83OjwJn8pkcAvRk
 4GoEio4Yp0RMTOYk1nvKEhUGnxLwpma+xX5ulZkSTaYhZl++eX8HUGmfHhpxMcK9
 Unz1Y7vRIRaNUIawZECijxVj9yvteczwdwjWBp7AH2HChZ3LWJGo2xikd1Jwizx8
 zPv+mdaHkV9gbORS53hvqVaXXjiZVmLKQEz6LlWHubuWysf98YcBzNAhSKpjQzqW
 cwjXyw3MNc5fPjliwUstN/9ImWFdRJgwmdQ0DJ1v6kWPbHMQ4lCxeasy02YJ7l0R
 TWUOTyTSGT7Hd8CRrryo7akQ3nt8g7fZAR6nVujexbjkSt9ZbBSplAikiSKRbjU2
 7jkolYSM1ADqEeBBwcDnG2O45Pv8PxKGa4/8MV2hkcvrkkJp2lW+KybY0qp19MWb
 Dw09QYzFb5u6sKqD6AsjJQ6GKxLxNn3yBKk16V1yF0kAvQRdIj0XPgtMnGUgdkAw
 QA1nRQM25CLyOtH9SVWogRLof8UTZUlPtUCxKRww2//pAVkKGHg/afnnkqN933Yc
 Kv7/Mz2es6Km+D4qkQetnXF/IOxWfVUvnQa23Oe7gmkg4KNNrGO6bo7iQXDjDrHa
 LuNfJZRG5DzDjbdcp2t3
 =fE8E
 -----END PGP SIGNATURE-----

Merge tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux

Pull Renesas H8/300 architecture re-introduction from Yoshinori Sato.

We dropped arch/h8300 two years ago as stale and old, this is a new and
more modern rewritten arch support for the same architecture.

* tag 'for-4.2' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux: (27 commits)
  h8300: fix typo.
  h8300: Always build dtb
  h8300: Remove ARCH_WANT_IPC_PARSE_VERSION
  sh-sci: Get register size from platform device
  clk: h8300: fix error handling in h8s2678_pll_clk_setup()
  h8300: Symbol name fix
  h8300: devicetree source
  h8300: configs
  h8300: IRQ chip driver
  h8300: clocksource
  h8300: clock driver
  h8300: Build scripts
  h8300: library functions
  h8300: Memory management
  h8300: miscellaneous functions
  h8300: process helpers
  h8300: compressed image support
  h8300: Low level entry
  h8300: kernel startup
  h8300: Interrupt and exceptions
  ...
2015-06-25 13:07:24 -07:00
Linus Torvalds e0456717e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add TX fast path in mac80211, from Johannes Berg.

 2) Add TSO/GRO support to ibmveth, from Thomas Falcon

 3) Move away from cached routes in ipv6, just like ipv4, from Martin
    KaFai Lau.

 4) Lots of new rhashtable tests, from Thomas Graf.

 5) Run ingress qdisc lockless, from Alexei Starovoitov.

 6) Allow servers to fetch TCP packet headers for SYN packets of new
    connections, for fingerprinting.  From Eric Dumazet.

 7) Add mode parameter to pktgen, for testing receive.  From Alexei
    Starovoitov.

 8) Cache access optimizations via simplifications of build_skb(), from
    Alexander Duyck.

 9) Move page frag allocator under mm/, also from Alexander.

10) Add xmit_more support to hv_netvsc, from KY Srinivasan.

11) Add a counter guard in case we try to perform endless reclassify
    loops in the packet scheduler.

12) Extern flow dissector to be programmable and use it in new "Flower"
    classifier.  From Jiri Pirko.

13) AF_PACKET fanout rollover fixes, performance improvements, and new
    statistics.  From Willem de Bruijn.

14) Add netdev driver for GENEVE tunnels, from John W Linville.

15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.

16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.

17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
    Borkmann.

18) Add tail call support to BPF, from Alexei Starovoitov.

19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.

20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.

21) Favor even port numbers for allocation to connect() requests, and
    odd port numbers for bind(0), in an effort to help avoid
    ip_local_port_range exhaustion.  From Eric Dumazet.

22) Add Cavium ThunderX driver, from Sunil Goutham.

23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
    from Alexei Starovoitov.

24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.

25) Double TCP Small Queues default to 256K to accomodate situations
    like the XEN driver and wireless aggregation.  From Wei Liu.

26) Add more entropy inputs to flow dissector, from Tom Herbert.

27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
    Jonassen.

28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.

29) Track and act upon link status of ipv4 route nexthops, from Andy
    Gospodarek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
  bridge: vlan: flush the dynamically learned entries on port vlan delete
  bridge: multicast: add a comment to br_port_state_selection about blocking state
  net: inet_diag: export IPV6_V6ONLY sockopt
  stmmac: troubleshoot unexpected bits in des0 & des1
  net: ipv4 sysctl option to ignore routes when nexthop link is down
  net: track link-status of ipv4 nexthops
  net: switchdev: ignore unsupported bridge flags
  net: Cavium: Fix MAC address setting in shutdown state
  drivers: net: xgene: fix for ACPI support without ACPI
  ip: report the original address of ICMP messages
  net/mlx5e: Prefetch skb data on RX
  net/mlx5e: Pop cq outside mlx5e_get_cqe
  net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
  net/mlx5e: Remove extra spaces
  net/mlx5e: Avoid TX CQE generation if more xmit packets expected
  net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
  net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
  net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
  net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
  net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
  ...
2015-06-24 16:49:49 -07:00
Linus Torvalds 1a13e36a79 fbdev changes for 4.2
* ssd1307fb: various fixes and improvements, SSD1305 support
 * Use architecture agnostic functions instead of MTRR functions in various
   fbdev drivers
 * TI DRA7xx SoC display support (arch/arm/ side)
 * OMAPDSS componentization to fix probing order issues
 * OMAPDSS scaling fixes
 * msm_fb: remove obsoleted driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJViP8kAAoJEPo9qoy8lh71RqQP/3YnFrHQj1G/EDw4EvaUrcJb
 MiEbc6Q1/OkG+KWls8kNFi0Mm5PeXlOYgjYukr9mFS0C/BxceU/Aqg/+1TqGSMe4
 kZArCTKWa3ZyU2TUwmPPpeUPeUTUBBXrVBdfqtfNzs2wQKunwQX9MlKQnDHnCZJD
 4kUsK12iW5C+EW0fDWDEg9GwEe/cJ6jBLEYWPTg/1ePtrKKGp8O6kEEtOTVwaKT+
 EdStaPOTUKvCgdcfVQhIgKcym2t4/BeFEt2moxDU9vwClatGbXmTDIru2iCrGgIU
 VFGIjOetVwRe0h+8zpYTATxvJPxmjWYL7HhJ0SbFNMDlZephdJxZGJbgszxHZCW/
 ap1fnxWvW2LZ48JsZSmHTnWK0CoX3WGs+Q+TWqMHy1ID8jkOc2SkHeB3IzCyOG/V
 NwUNvDyooyNV0J8ywbBXIMVmlg7YE3AgNROFlApqm2rF5fhtTO3HER71ALBZckEH
 FXRN4tsyLQXbzmuHcQgY3ENxPZgPYM0usSdAVWSU/vIXrhdnWGA7nWE7bRg508Hd
 aHhpw5HrH8L+4nNwDvd4Dai9Ye8DimWvIPdb1wH8mZ2c81sLxCTkePqkAc7AXo54
 UOkXSWjUBu1i8w/BZqXT9U/dU+aCDQ9beNDFLrZQLwrwtHASyyJY75Hi3DtcZyBQ
 HUAWB45Gu2f+k7PCGsRQ
 =Ix8O
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:

 - ssd1307fb: various fixes and improvements, SSD1305 support

 - use architecture agnostic functions instead of MTRR functions in
   various fbdev drivers

 - TI DRA7xx SoC display support (arch/arm/ side)

 - OMAPDSS componentization to fix probing order issues

 - OMAPDSS scaling fixes

 - msm_fb: remove obsoleted driver

* tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (77 commits)
  msm: msm_fb: Remove dead code
  OMAPDSS: HDMI: wait for framedone when stopping video
  OMAPDSS: HDMI4: fix error handling
  OMAPDSS: DISPC: scaler debug print
  OMAPDSS: DISPC: do only y decimation on OMAP3
  OMAPDSS: DISPC: check if scaling setup failed
  OMAPDSS: DISPC: fix 64 bit issue in 5-tap
  OMAPDSS: DISPC: fix row_inc for OMAP3
  OMAPDSS: DISPC: add check for scaling limits
  OMAPDSS: DISPC: fix check_horiz_timing_omap3 args
  OMAPDSS: DISPC: fix predecimation for YUV modes
  OMAPDSS: DISPC: work-around for errata i631
  OMAPDSS: simplify submodule reg/unreg code
  OMAPDSS: componentize omapdss
  OMAPDSS: reorder uninit calls
  OMAPDSS: remove uses of __init/__exit
  OMAPDSS: fix dss_init_ports error handling
  OMAPDSS: refactor dss probe function
  OMAPDSS: move 'dss_initialized' to dss driver
  fbdev: propagate result of fb_videomode_from_videomode()
  ...
2015-06-23 16:23:30 -07:00
Linus Torvalds 2ad7b44f5d Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull clkdev updates from Russell King:
 "This series addresses some breakage in clkdev caused by a previous
  patch set from the clk tree which introduced per-user clk structures.
  This basically renamed the existing 'struct clk' to 'struct clk_hw',
  and introduced a new 'struct clk'.

  This change will break anyone using clk_add_alias() with the common
  clk code enabled.  Thankfully, the intersection of users of
  clk_add_alias() and those using the common clk code is practically
  zero, but this is something which should be fixed to keep the code
  sane.

  The problem is that clk_add_alias() does this:

        r = clk_get(...);
        l = clkdev_alloc(r, ...);
        clk_put(...);

  which causes the alias to store a pointer to 'r', which has been
  freed.

  The original patch set tried to work around this problem incorrectly -
  at clk_get() time, it tried to convert the struct clk to a struct
  clk_hw, and then creating a new struct clk from that.  Clearly, if the
  original struct clk has been freed, then we have a use-after-free bug.

  We have other places in the tree which do something similar, so this
  series also addresses those locations too.

  This series addresses this problem by converting clkdev to store and
  use the clk_hw pointer.  This allows clk_get() to only have to create
  it's per-user struct clk from the clk_hw.  We can also get to the
  desired clk_hw at clk_add_alias() or clk lookup creation time, when
  the struct clk is "alive".

  We also perform some cleanups of the code:

   - replacing looped calls to clkdev_add() with clkdev_add_table()

   - replacing open-coded lookup allocation (which should have been
     using clkdev_alloc()) and subsequent clkdev_add() with
     clkdev_create()

   - replacing open-coded clk_add_alias() with clk_add_alias()"

* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  clk: s2mps11: use clkdev_create()
  ASoC: migor: use clkdev_create()
  ARM: omap2: use clkdev_add_alias()
  ARM: omap2: use clkdev_create()
  ARM: orion: use clkdev_create()
  ARM: lpc32xx: convert to use clkdev_add_table()
  SH: use clkdev_add_table()
  clkdev: add clkdev_create() helper
  clkdev: const-ify connection id to clk_add_alias()
  clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
  clkdev: drop __init from clkdev_add_table()
  clk: update clk API documentation to clarify clk_round_rate()
  clkdev: use clk_hw internally
2015-06-23 15:50:46 -07:00
Dan Carpenter ded515a4d5 clk: h8300: fix error handling in h8s2678_pll_clk_setup()
The error handling was a bit messy and buggy.  It freed "pll_clock" then
dereferenced it, and then freed it again.  I've re-written it in normal
kernel style.

Fixes: 42ff8e8008c8 ('h8300: clock driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-06-23 13:35:58 +09:00
Yoshinori Sato 7b5bb891a6 h8300: clock driver
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-06-23 13:35:55 +09:00
Daniel Thompson 358bdf892f clk: stm32: Add clock driver for STM32F4[23]xxx devices
The driver supports decoding and statically modelling PLL state (i.e.
we inherit state from bootloader) and provides support for all
peripherals that support simple one-bit gated clocks. The covers all
peripherals whose clocks come from the AHB, APB1 or APB2 buses.

It has been tested on an STM32F429I-Discovery board. The clock counts
for TIM2, USART1 and SYSTICK are all set correctly and the wall clock
looks OK when checked with a stopwatch. I have also tested a prototype
driver for the RNG hardware. The RNG clock is correctly enabled by the
framework (also did inverse test and proved that by changing DT to
configure the wrong clock bit then we observe the RNG driver to fail).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
[sboyd@codeaurora.org: Silence sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-22 16:17:01 -07:00
Huacai Chen 30ad29bb48 MIPS: Loongson: Naming style cleanup and rework
Currently, code of Loongson-2/3 is under loongson directory and code of
Loongson-1 is under loongson1 directory. Besides, there are Kconfig
options such as MACH_LOONGSON and MACH_LOONGSON1. This naming style is
very ugly and confusing. Since Loongson-2/3 are both 64-bit general-
purpose CPU while Loongson-1 is 32-bit SoC, we rename both file names
and Kconfig symbols from loongson/loongson1 to loongson64/loongson32.

[ralf@linux-mips.org: Resolve a number of simple conflicts.]

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9790/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:59 +02:00
Paul Burton 29136ad581 clk: ingenic: add JZ4780 CGU support
Add support for the clocks provided by the CGU in the Ingenic JZ4780
SoC, making use of the SoC-agnostic CGU code to do the heavy lifting.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Co-authored-by: Paul Cercueil <paul@crapouillou.net>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10157/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:20 +02:00
Paul Burton 50d893ff72 MIPS, clk: move jz4740 clock suspend, resume functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_{suspend,resume} functions there for
such consistency. The arch/mips/jz4740/clock.c file now contains nothing
more of use & so is removed.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10158/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:19 +02:00
Paul Burton ed286ca5d6 MIPS, clk: move jz4740 UDC auto suspend functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_udc_{dis,en}able_auto_suspend functions
there for such consistency.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10154/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:18 +02:00
Paul Burton 41dd641e9a MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move jz4740_clock_set_wait_mode for such consistency.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10153/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:17 +02:00
Paul Burton ff1930c6bd MIPS,clk: migrate JZ4740 to common clock framework
Migrate the JZ4740 & the qi_lb60 board to use common clock framework
via the new Ingenic SoC CGU driver. Note that the JZ4740-specific
debugfs code is removed since common clock framework provides its own
debug capabilities.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Co-authored-by: Paul Cercueil <paul@crapouillou.net>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:15 +02:00
Paul Burton b066303fb3 clk: ingenic: add driver for Ingenic SoC CGU clocks
This driver supports the CGU clocks for Ingenic SoCs. It is generic
enough to be usable across at least the JZ4740 to the JZ4780, and will
be made use of on such devices in subsequent commits. This patch by
itself only adds the SoC-agnostic infrastructure that forms the bulk of
the CGU driver for the aforementioned further commits to make use of.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Co-authored-by: Paul Cercueil <paul@crapouillou.net>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10150/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21 21:53:15 +02:00
Michael Turquette 2cd7b04328 clk: tegra: Changes for v4.2-rc1
This contains the EMC clock driver that's been exhaustively reviewed and
 tested. It also includes a change to the clock core that allows a clock
 provider to perform low-level reparenting of clocks. This is required by
 the EMC clock driver because the reparenting needs to be done at a very
 specific point in time during the EMC frequency switch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVU1EDAAoJEN0jrNd/PrOhYO8QAKDSJXdoVqtQITU3lUDfTB7i
 g7EJfL8PjT5i1KTjJHT7/2FFuQlb7eeJexyNV539sIJtUrcDOl6qNVbq/FYNouia
 bF7XqOxbR8QpWsYbQ46bzbwBaDd+CPLDwjSounNf6G4kJQy7/9SVr6BBPbLa2LIS
 xzxMzr2+/CCmH9P1p2I5ey5f1fQ75DKaz8RGgv3FcltdkKNZQCTa+hthCOdicNJu
 BoVHqXgJZvz0tgZk0zdCrKyUi31Gu8CNmFad7jtIS01EHGjBpgSE9m7ViYYRCFl5
 GIjVh5IryCg2LJt8JP2mPCFNyiAvjxzMt/hJquzj2x2QMKrK8wgC3BwlrMUPuhkM
 xkldCMXY1ImVgTbwFdAEFR08+/VybzfLu4FDZSdG4IeNKfMj0n3EirAX9gE1VHDl
 bofkPZsE2Vr4N3jYekjbql3m9ZO8WsnIRz7D/Rd1OIqNyMA3xZQz79zgqQ5EQsB1
 +GJztoyIdDikefCAww/z7I+vTTQ8InV/FnuzKN/SyqqLe5Ni9TFg6sCN50cnW2Ps
 /wHE0KAEV6Oem0dNOISCd3cx231FAiCKQBSm0sUl0cAQ+x1E/NKs6H7vC0wrvWOo
 f7072+BesVG9FPpWUg/lAD95YlPcoFdTDUep9J6mX2RB5ZfVEr9gNN04dY3tt4g2
 kl37UB2qRXX0aEdkTWm2
 =I0gO
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.2-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next

clk: tegra: Changes for v4.2-rc1

This contains the EMC clock driver that's been exhaustively reviewed and
tested. It also includes a change to the clock core that allows a clock
provider to perform low-level reparenting of clocks. This is required by
the EMC clock driver because the reparenting needs to be done at a very
specific point in time during the EMC frequency switch.
2015-06-20 13:29:48 -07:00
Michael Turquette 85e88fab13 Merge branch 'clk-exynos-cpu-clk' into clk-next
Folded into this merge commit is a build error fix: s/clk/core in
clk_change_rate due to the new struct clk_core
2015-06-20 13:26:40 -07:00
Thomas Abraham 6ae5a0b46f clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock
With the addition of the new Samsung specific cpu-clock type, the
arm clock can be represented as a cpu-clock type. Add the CPU clock
configuration data and instantiate the CPU clock type for Exynos4210.

Changes by Bartlomiej:
- fixed issue with wrong dividers being setup by Common Clock Framework
  (by an addition of CLK_RECALC_NEW_RATES clock flag to mout_apll clock,
  without this change cpufreq-dt driver showed ~10 mA larger energy
  consumption when compared to cpufreq-exynos one when "performance"
  cpufreq governor was used on Exynos4210 SoC based Origen board), this
  was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE
  and CLK_DIVIDER_READ_ONLY clock flags in the original patchset (in
  "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update
  clock flags") but using these flags is not sufficient to fix the issue
  observed
- removed Exynos5250 and Exynos5420 support for now

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20 12:17:42 -07:00
Thomas Abraham ddeac8d968 clk: samsung: add infrastructure to register cpu clocks
The CPU clock provider supplies the clock to the CPU clock domain. The
composition and organization of the CPU clock provider could vary among
Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers
and gates. This patch defines a new clock type for CPU clock provider and
adds infrastructure to register the CPU clock providers for Samsung
platforms.

Changes by Bartlomiej:
- fixed issue with setting lower dividers before the parent clock speed
  was lowered (the issue resulted in lockup on Exynos4210 SoC based
  Origen board when "ondemand" cpufreq governor was stress tested)
- fixed missing spin_unlock on error in exynos_cpuclk_post_rate_change()
  problem by moving cfg_data search outside of the spin locked area
- removed leftover kfree() in exynos_register_cpu_clock() that could
  result in dereferencing the NULL pointer on error
- moved spin_lock earlier in exynos_cpuclk_pre_rate_change() to cover
  reading of E4210_SRC_CPU and E4210_DIV_CPU1 registers
- added missing "last chance" checks to wait_until_divider_stable() and
  wait_until_mux_stable() (needed in case that IRQ handling took long
  time to proceed and resulted in function printing incorrect error
  message about timeout)
- moved E4210_CPU_DIV[0,1]() macros just before their only users,
  this resulted in moving them from patch #2 to patch #3/6 ("clk:
  samsung: exynos4: add cpu clock configuration data and instantiate
  cpu clock")
- removed E5250_CPU_DIV[0,1](), E5420_EGL_DIV0() and E5420_KFC_DIV()
  macros for now
- added my Copyrights to drivers/clk/samsung/clk-cpu.c

Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20 12:17:42 -07:00
Bartlomiej Zolnierkiewicz d8d919879e clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock support
This flag is needed to fix the issue with wrong dividers being setup
by Common Clock Framework when using the new Exynos cpu clock support.

The issue happens because clk_core_set_rate_nolock()  calls
clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have
a chance to run.  In case of Exynos cpu clock support pre/post clock
notifiers are registered for mout_apll clock which is a parent of armclk
cpu clock and dividers are modified in both pre and post clock notifier.
This results in wrong dividers values being later programmed by
clk_change_rate(top).  To workaround the problem CLK_RECALC_NEW_RATES
flag is added and it is set for mout_apll clock later so the correct
divider values are re-calculated after both pre and post clock notifiers
had run.

For example when using "performance" governor on Exynos4210 Origen board
the cpufreq-dt driver requests to change the frequency from 1000MHz to
1200MHz and after the change state of the relevant clocks is following:

Without use of CLK_GET_RATE_NOCACHE flag:

 fout_apll rate: 1200000000
         fout_apll_div_2 rate: 600000000
                 mout_clkout_cpu rate: 600000000
                         div_clkout_cpu rate: 600000000
                                 clkout_cpu rate: 600000000
         mout_apll rate: 1200000000
                 armclk rate: 1200000000
                 mout_hpm rate: 1200000000
                         div_copy rate: 300000000
                                 div_hpm rate: 300000000
                 mout_core rate: 1200000000
                         div_core rate: 1200000000
                                 div_core2 rate: 1200000000
                                         arm_clk_div_2 rate: 600000000
                                         div_corem0 rate: 300000000
                                         div_corem1 rate: 150000000
                                         div_periph rate: 300000000
                         div_atb rate: 300000000
                                 div_pclk_dbg rate: 150000000
                 sclk_apll rate: 1200000000
                         sclk_apll_div_2 rate: 600000000

With use of CLK_GET_RATE_NOCACHE flag:

 fout_apll rate: 1200000000
         fout_apll_div_2 rate: 600000000
                 mout_clkout_cpu rate: 600000000
                         div_clkout_cpu rate: 600000000
                                 clkout_cpu rate: 600000000
         mout_apll rate: 1200000000
                 armclk rate: 1200000000
                 mout_hpm rate: 1200000000
                         div_copy rate: 200000000
                                 div_hpm rate: 200000000
                 mout_core rate: 1200000000
                         div_core rate: 1200000000
                                 div_core2 rate: 1200000000
                                         arm_clk_div_2 rate: 600000000
                                         div_corem0 rate: 300000000
                                         div_corem1 rate: 150000000
                                         div_periph rate: 300000000
                         div_atb rate: 240000000
                                 div_pclk_dbg rate: 120000000
                 sclk_apll rate: 150000000
                         sclk_apll_div_2 rate: 75000000

Without this change cpufreq-dt driver showed ~10 mA larger energy
consumption when compared to cpufreq-exynos one when "performance"
cpufreq governor was used on Exynos4210 SoC based Origen board.

This issue was probably meant to be workarounded by use of
CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in
the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk:
samsung: remove unused clock aliases and update clock flags" patch)
but usage of these flags is not sufficient to fix the issue observed.

Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20 12:17:41 -07:00
Michael Turquette 909aa10e6d Merge branch 'ccf/atmel-fixes-for-4.1' of https://github.com/bbrezillon/linux-at91 into clk-fixes 2015-06-19 07:37:14 -07:00
Nicolas Ferre 28df9c2fb6 clk: at91: fix h32mx prototype inclusion in pmc header
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is
present but smd clock isn't.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes: bcc5fd49a0 ("clk: at91: add a driver for the h32mx clock")
Cc: <stable@vger.kernel.org> # 3.18+
2015-06-19 15:48:34 +02:00
Boris Brezillon 86e4404af2 clk: at91: fix PERIPHERAL_MAX_SHIFT definition
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the
round_rate and set_rate logic accordingly.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: "Wu, Songjun" <Songjun.Wu@atmel.com>
2015-06-19 14:43:40 +02:00
Boris Brezillon 6c7b03e1ae clk: at91: pll: fix input range validity check
The PLL impose a certain input range to work correctly, but it appears that
this input range does not apply on the input clock (or parent clock) but
on the input clock after it has passed the PLL divisor.
Fix the implementation accordingly.

Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Jonas Andersson <jonas@microbit.se>
2015-06-19 14:43:39 +02:00
Joachim Eastwood 472cd304a3 clk: add lpc18xx ccu clk driver
Add driver for NXP LPC18xx/43xx Clock Control Unit (CCU). The CCU
provides fine grained gating of most clocks present in the SoC.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 15:44:48 -07:00
Joachim Eastwood b04e0b8fd5 clk: add lpc18xx cgu clk driver
Add driver for NXP LPC18xx/43xx Clock Generation Unit (CGU). The CGU
contains several clock generators and output stages that route the
clocks either directly to peripherals or to a Clock Control Unit
(CCU).

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 15:44:47 -07:00
Murali Karicheri 02fdfd708f clk: keystone: add support for post divider register for main pll
Main PLL controller has post divider bits in a separate register in
pll controller. Use the value from this register instead of fixed
divider when available.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 15:36:33 -07:00
Michael Turquette 91990d213c Allwinner clocks additions for 4.2
One error fix, and one patch to add support for the USB clock found on the
 Allwinner A23 and A33
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVfdWlAAoJEBx+YmzsjxAgijIP/1j0EcaRZOaEkLWDOSSQ4av5
 jH/NrMhpnYJRHPgVZg9KgcF8znOIQdutxy67ScpMHpQ2x+1yw7qZ+ET4Y6hCTz0g
 Z1jUYgwuf1yu0j18VZ7SJQhIWjsOLlOyOyXwzwEUEfJe0p/+h1msQNfW2wqZvvBf
 ognuEDCduhz2JxmE8Jmcm4RlrVFntcaUilv/abW/oEsWWbPBU6oAt5YkQuCGmxvC
 oxeyK0UiUAzEh6nq0XoSz6tATAFjo1yLefrH0GlTZUeg4GmUbPmrvKmSRQFOWDnB
 drWDl/HKWehW/EcK8YcUhhfYJk5NFyYHxYDODHD91xAj1iGAvPO8mmLn0Wl75Tkn
 oAI/qyUL7brNRpDW4NirAP0+AIgsD6YrAxbZof811+FlJ0WZ9M4i+hIIzzgq31gL
 Tw5qSSQ730VtJQfgNlDFL6mHxqKM7s/UzHJbIZirEs4FFHEYvOLdOfHqv7ACDAif
 goYN4M40htseU80rYOfZFrbaNta13Eh7Lqdmi5mat7OJNvhcONbxe9P3kc4BTGbc
 VRydPObMJzIdRFxJEp3Gu+D/NLSHyJ7O3WwH6OxTQBwnASMMfOutPycdbMZoZXc1
 2NQPQq6xhwFIZI2G1uD45Dnt3qX8qQqeLce8UItLIlHZGN3c6hjerQ/+Y+gR4BKY
 TA15OfxbP/ZgP31xgYC0
 =uxrz
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clocks-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner clocks additions for 4.2

One error fix, and one patch to add support for the USB clock found on the
Allwinner A23 and A33
2015-06-18 14:17:35 -07:00
Boris Brezillon dc627eea98 clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSED
The crypto SRAM, used by the armada 370 cpuidle code to workaround a bug
in the BootROM code, requires the crypto clk to be up and running.
Flag the crypto clk as IGNORE_UNUSED until we add the proper
infrastructure to define the crypto SRAM in the DT and reference the crypto
clk in this SRAM node.

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 13:51:45 -07:00
Ray Jui 61ca7b0c7f clk: cygnus: add clock support for Broadcom Cygnus
The Broadcom Cygnus SoC is architected under the iProc architecture. It
has the following PLLs: ARMPLL, GENPLL, LCPLL0, MIPIPLL, all dervied
from an onboard crystal. Cygnus also has various ASIU clocks that are
derived directly from the onboard crystal.

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:39 -07:00
Ray Jui 69a0b2c559 clk: Change bcm clocks build dependency
The clock code under drivers/clk/bcm now contains code for both the
Broadcom mobile SoCs and the iProc SoCs. Change the the makefile
dependency to be under config flag CONFIG_ARCH_BCM that's enabled for
both families of SoCs

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:39 -07:00
Ray Jui 5fe225c105 clk: iproc: add initial common clock support
This adds basic and generic support for various iProc PLLs and clocks
including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks.

SoCs under the iProc architecture can define their specific register
offsets and clock parameters for their PLL and clock controllers. These
parameters can be passed as arugments into the generic iProc PLL and
clock setup functions

Derived from code originally provided by Jonathan Richardson
<jonathar@broadcom.com>

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18 12:36:38 -07:00
Paul Gortmaker 77459a0fec drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver
This driver builds based on obj-y and hence will not ever be
modular.  Change it to use the non-modular registration so that it
won't suffer a compile fail once a header move places the modular
registration within the module.h file.

Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:39 -04:00
Paul Gortmaker 791ed0bb55 drivers/clk: don't use module_init in clk-nomadik.c which is non-modular
The clk-nomadik.o is built for ARCH_NOMADIK -- which is bool, and
hence this code is either present or absent.  It will never be
modular, so using module_init as an alias for __initcall can be
somewhat misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups.  As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.

Cc: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:31 -04:00
Paul Gortmaker a0c4dfeede drivers/clk: include <module.h> for clk-max77xxx modular code
These files are built off of the tristate COMMON_CLK_MAX77686 and
COMMON_CLK_MAX77802 respectively.  They also contains modular function
calls so they should explicitly include module.h to avoid compile
breakage during header shuffles done in the future.

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:25 -04:00
Dan Carpenter 46965688ac clk: meson: add some error handling in meson_clk_register_cpu()
This error handling hopefully isn't needed but it make the static
checkers happy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-12 14:30:19 -07:00
Stephen Boyd 2210978516 clk: pxa: Fix const discarding warning
A recent change to mark parent names as const missed this struct
member so we get warnings like:

drivers/clk/pxa/clk-pxa25x.c:122:2: warning: initialization
discards 'const' qualifier from pointer target type

Fix it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-12 14:30:12 -07:00
Kevin Hilman 4d48614ec4 Merge branch 'zte/soc' into next/soc
* zte/soc:
  ARM: zx: Add basic defconfig support for ZX296702
  ARM: dts: zx: add an initial zx296702 dts and doc
  clk: zx: add clock support to zx296702
  dt-bindings: Add #defines for ZTE ZX296702 clocks
2015-06-11 16:19:29 -07:00
Jun Nie 5a46580812 clk: zx: add clock support to zx296702
It adds a clock driver for zx296702 SoC to register the clock tree to
Common Clock Framework.  All the clocks of bus topology and some the
peripheral clocks are ready with this commit. Some missing leaf clocks
for peripherals will be added later when needed.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-11 16:18:08 -07:00
Kevin Hilman 3e0d0b81ea The i.MX SoC updates for 4.2:
- Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
    Cortex-M4 cores.
  - Support suspend from IRAM on i.MX53, so that DDR pins can be set to
    high impedance for more power saving during suspend.
  - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
  - Move i.MX GPT timer driver from arch/arm/mach-imx into
    drivers/clocksource.
  - A couple of clock driver update for VF610 and i.MX6Q.
  - A few random code correction and improvement.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVb7grAAoJEFBXWFqHsHzOWS0H/RXV1UjvsJTfK8+KR2SGY5QO
 3hU4YQYpnkukG2OtxAaWKXzIh+xeINqJ02cws/zyEfVZFsZp/i5Z7EM5811qQeNC
 f9uCtFCNynTnWjUP9YXELgAX3/DPHMr+Em5QGOWwh+311YypJyP7CttsJvmjJIUN
 qGYXdpy2xhqKgSGrnI+dhpxTdhtm/jmsggoM8qqi2aYB3c3rnWCc6QSBMR8oxFKB
 Tmxd/cc/6Pvbp7W+AztTb/z8UD21UJkn96FhUb9563HKjf7kvbP4ydJTwhBxfyQu
 YxE4kkejrnVNaUl1Tkqmf7rTgLKaU92nrLCuBDI/91OET+GQtq2R5fE8iMPs29k=
 =c254
 -----END PGP SIGNATURE-----

Merge tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

The i.MX SoC updates for 4.2:
 - Add new SoC i.MX7D support, which integrates two Cortex-A7 and one
   Cortex-M4 cores.
 - Support suspend from IRAM on i.MX53, so that DDR pins can be set to
   high impedance for more power saving during suspend.
 - Move i.MX clock drivers from arch/arm/mach-imx to drivers/clk/imx.
 - Move i.MX GPT timer driver from arch/arm/mach-imx into
   drivers/clocksource.
 - A couple of clock driver update for VF610 and i.MX6Q.
 - A few random code correction and improvement.

* tag 'imx-soc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (44 commits)
  ARM: imx: imx7d requires anatop
  clocksource: timer-imx-gpt: remove include of <asm/mach/time.h>
  ARM: imx: move timer driver into drivers/clocksource
  ARM: imx: remove platform headers from timer driver
  ARM: imx: provide gpt device specific irq functions
  ARM: imx: get rid of variable timer_base
  ARM: imx: define gpt register offset per device type
  ARM: imx: move clock event variables into imx_timer
  ARM: imx: set up .set_next_event hook via imx_gpt_data
  ARM: imx: setup tctl register in device specific function
  ARM: imx: initialize gpt device type for DT boot
  ARM: imx: define an enum for gpt timer device type
  ARM: imx: move timer resources into a structure
  ARM: imx: use relaxed IO accessor in timer driver
  ARM: imx: make imx51/3 suspend optional
  ARM: clk-imx6q: refine sata's parent
  ARM: imx: clk-v610: Add clock for I2C2 and I2C3
  ARM: mach-imx: iomux-imx31: Use DECLARE_BITMAP
  ARM: imx: add imx7d clk tree support
  ARM: clk: imx: update pllv3 to support imx7
  ...

 Conflicts:
	arch/arm/mach-imx/Kconfig
2015-06-10 16:58:05 -07:00
Maxime Coquelin 8c9a8a8f71 clk: Move debug_node field under DEBUG_FS flag in struct clk_core
The debug_node field is only used when DEBUG_FS config is selected,
so declare it only if DEBUG_FS is selected.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:21:22 -07:00
Daniel Thompson 3037e9ea78 clk: fixed: Add comment to clk_fixed_set_rate
Currently it is not made explicit why clk_fixed_set_rate() can ignore
its arguments and unconditionally return success. Add a comment
to explain this.

We also mark the clk_ops table const since it should never be
modified at runtime.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:19:43 -07:00
Stephen Boyd b41c7bfa27 clk: cdce925: Fix printk size_t warning
drivers/clk/clk-cdce925.c:550: warning: format ‘%u’ expects type
‘unsigned int’, but argument 6 has type ‘size_t’

Cc: Mike Looijmans <mike.looijmans@topic.nl>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10 14:16:36 -07:00
Dan Carpenter 7eaf8b9f0b clk: socfpga: remove a stray tab
This line was indented too far.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-09 18:14:27 -07:00
Jonghwa Lee 80e7264c8f clk: exynos5433: Add CLK_IGNORE_UNUSED flag to clocks for SMC
This patch adds 'CLK_IGNORE_UNUSED' flag to clocks which is required for
operation of secure monitor call (smc). System will hang when it executes 'smc'
with one of those clock is gated. All related clocks must be enabled.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-09 18:14:27 -07:00
Joonyoung Shim eceb7aaec0 clk: exynos5433: Add clock flag to support the DVFS of GPU
This patch adds the CLK_SET_RATE_PARENT flag for 'aclk_g3d' clock and parent
clocks becuase 'aclk_g3d' is used to change GPU frequency for DVFS (Dynamic
Voltage Frequency Scaling) feature and adds CLK_IGNORE_UNUSED flags to
'aclk_asyncapbs_g3d'/'aclk_asyncapbm_g3d' clocks to access the SFR
of the MALI device.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[cw00.choi: Add patch description and add CLK_SET_RATE_PARENT to 'aclk_g3d' clk]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-09 18:14:27 -07:00
Hyungwon Hwang 2a9c67b2d3 clk: exynos5433: Add DIV_CPIF to the list of stored registers on suspend
This DIV_CPIF register must be stored when the system is suspended, and must
be restored on system resume. This patch adds the register to the list of
restored registers.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-09 18:14:26 -07:00
Chanwoo Choi f7c172b5c1 clk: exynos5433: Add CLK_SET_RATE_PARENT to support DVFS for big.LITTLE core
This patch adds CLK_SET_RATE_PARENT flag to support DVFS of Cortex-{A53|A57}
core (big.LITTLE core) because 'sclk_{apollo|atlas}' leaf clock is used to
change the CPU frequency of Cortex-{A53|A57} core in arm_big_little.c driver.
- 'apollo' word means the LITTLE core (Cortex-A53 core) in Exynos5433 TRM.
- 'atlas' word means the big core (Cortex-A57 core) in Exynos5433 TRM.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-09 18:14:26 -07:00
Dinh Nguyen 761d3e328c clk: socfpga: make use of of_clk_parent_fill helper function
Use of_clk_parent_fill to fill in the parent clock's array.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 18:10:34 -07:00
Dinh Nguyen 2e61dfb360 clk: of: helper for filling parent clock array and return num of parents
Sprinkled all through the platform clock drivers are code like this to
fill the clock parent array:

for (i = 0; i < num_parents; ++i)
	parent_names[i] = of_clk_get_parent_name(np, i);

The of_clk_parent_fill() will do the same as the code above, and while
at it, return the number of parents as well since the logic of the
function is to the walk the clock node to look for the parent.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
[sboyd@codeaurora.org: Fixed kernel-doc]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 18:10:33 -07:00
Stephen Boyd d3000d0d4a Merge branch 'clk-meson8b' into clk-next
* clk-meson8b:
  clk: meson8b: Add support for Meson8b clocks
  clk: meson: Document bindings for Meson8b clock controller
  clk: meson: Add support for Meson clock controller
2015-06-05 17:22:36 -07:00
Carlo Caione 28b9fcd016 clk: meson8b: Add support for Meson8b clocks
This patch adds support for the basic clocks found on the Amlogic
Meson8b SoCs.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 17:22:09 -07:00
Carlo Caione 7a29a86943 clk: meson: Add support for Meson clock controller
This patchset adds the infrastructure for registering and managing the
core clocks found on Amlogic MesonX SoCs. In particular:

- PLLs
- CPU clock
- Fixed rate clocks, fixed factor clocks, ...

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-05 17:22:08 -07:00
Uwe Kleine-König 4a1caed3d0 clk: make several parent names const
Since commit 2893c37946 ("clk: make strings in parent name arrays
const") the name of parent clocks can be const. So add more const in
several clock drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 14:27:06 -07:00
James Liao 90acb40f18 clk: mediatek: Fix apmixedsys clock registration
The size of clk_data should be the same as CLK_APMIXED_NR_CLK
instead of ARRAY_SIZE(plls). CLK_APMIXED_* is numbered from 1, so
CLK_APMIXED_NR_CLK will be greater than ARRAY_SIZE(plls).

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 14:07:07 -07:00
Geert Uytterhoeven f71355b3d1 clk: ti: Use of_clk_get_parent_count() instead of open coding
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 13:51:37 -07:00
Geert Uytterhoeven 0a65239c28 clk: st: Use of_clk_get_parent_count() instead of open coding
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 13:51:34 -07:00
Geert Uytterhoeven 51a43be9fa clk: at91: Use of_clk_get_parent_count() instead of open coding
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 13:51:23 -07:00
Kevin Cernekee 17bfa3f7b3 clk: pistachio: Add sanity checks on PLL configuration
When setting the PLL rates, check that:

 - VCO is within range
 - PFD is within range
 - PLL is disabled when postdiv is changed
 - postdiv2 <= postdiv1

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:43:39 -07:00
Ezequiel Garcia e0b7a79524 clk: pistachio: Lock the PLL when enabled upon rate change
Currently, when the rate is changed, the driver makes sure the
PLL is enabled before doing so. This is done because the PLL
cannot be locked while disabled. Once locked, the drivers
returns the PLL to its previous enable/disable state.

This is a bit cumbersome, and can be simplified.

This commit reworks the .set_rate() functions for the integer
and fractional PLLs. Upon rate change, the PLL is now locked
only if it's already enabled.

Also, the driver locks the PLL on .enable(). This makes sure
the PLL is locked when enabled, and not locked when disabled.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:43:33 -07:00
Ezequiel Garcia 4f4adfbf8e clk: pistachio: Add a pll_lock() helper for clarity
This commit adds a pll_lock() helper making the code more readable.
Cosmetic change only, no functionality changes.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:43:29 -07:00
Chao Xie 24c65a02b2 clk: mmp: add timer clock for pxa168/mmp2/pxa910
Timer has external fast clock, and it is a mux clock.
Add the timer clock type for timer driver.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:07:53 -07:00
Chao Xie 6644fddf06 clk: mmp: Fix the wrong factor table for uart PLL
The suggested value in the mmp2 manual is wrong.
There are only 13 bits for numerator, but some suggested
value has 14 bits.
Fix the factor tabled and remove the unused items.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:07:49 -07:00
Chao Xie a35247c6ee clk: mmp: add fixed clock UBS_PLL for pxa910/pxa168
USB will drive clock from USB_PLL.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04 12:07:33 -07:00
Tomi Valkeinen f892b20352 CLK: TI: always enable DESHDCP clock
DESHDCP clock is needed on DRA7 based SoCs to enable the DSS IP. That
clock is an odd one, as it is not supposed to be any kind of core clock
for DSS, and we don't even support HDCP, but the clock is still needed
even for the HWMOD framework to be able to reset the DSS IP.

As there's no support for multiple core clocks in the HWMOD framework,
we don't have any obvious place to enable this clock when DSS IP is
being enabled.

Furthermore, the HDMI on OMAP5 DSS is the same as on DRA7, and OMAP5
does not have any such clock configuration bit. This suggests that on
OMAP5 the DESHDCP clock is always enabled, and for DRA7 we have the
possibility to gate it.

So, as we don't have any clean way to enable and disable the clock
based on the need, this patch enables the clock at boot time, making it
work similarly to OMAP5.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Michael Turquette <mturquette@linaro.org>
2015-06-04 09:00:52 +03:00
Michael Turquette ae8d4048fa Merge branch 'clk-next-hi6220' into clk-next
Conflicts:
	drivers/clk/Kconfig
2015-06-03 15:22:03 -07:00
Mike Looijmans 19fbbbbcd3 Add TI CDCE925 I2C controlled clock synthesizer driver
This driver supports the TI CDCE925 programmable clock synthesizer.
The chip contains two PLLs with spread-spectrum clocking support and
five output dividers. The driver only supports the following setup,
and uses a fixed setting for the output muxes:
  Y1 is derived from the input clock
  Y2 and Y3 derive from PLL1
  Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-03 15:21:07 -07:00
Boris Brezillon 4d52b2acef clk: mvebu: add missing CESA gate clk
Even if not documented in the datasheet, the Armada 370 SoC can actually
gate the CESA (crypto engine) clock.
Add an entry in the gating_desc table to be able to reference the CESA
gateclk in the crypto node.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-03 15:17:07 -07:00
Bintian Wang 72ea48610d clk: hi6220: Clock driver support for Hisilicon hi6220 SoC
Add clock drivers for hi6220 SoC, this driver controls the SoC
registers to supply different clocks to different IPs in the SoC.

We add one divider clock for hi6220 because the divider in hi6220
also has a mask bit but it doesnot obey the rule defined by flag
"CLK_DIVIDER_HIWORD_MASK", we can not get index of the mask bit by
left shift fixed bits (e.g. 16 bits), so we add this divider clock
to handle it.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-03 15:12:25 -07:00
Bintian Wang 463cfb2c9b clk: hisilicon: Remove __init for marking function prototypes
__init markings on function prototypes are useless, so remove
them.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-03 09:33:49 -07:00
Tomi Valkeinen 2d5a3c803d arm: dra7: add DESHDCP clock
Add a new Linux clock for DRA7 based SoCs to control DESHDCP clock.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
2015-06-03 14:23:25 +03:00
Shawn Guo 0931aff722 ARM: imx: define an enum for gpt timer device type
Define an enum for gpt timer device type in include/soc/imx/timer.h to
tell the gpt block differences among SoCs.  Update non-DT users (clock
drivers) to pass the device type.

As we now have include/soc/imx/timer.h, the declaration of
mxc_timer_init() is moved into there as the best fit.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:52:26 +08:00
Sébastien Szymanski da946aeaea ARM: clk-imx6q: refine sata's parent
According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:38 +08:00
Mirza Krak fbfd617ea4 ARM: imx: clk-v610: Add clock for I2C2 and I2C3
Add support for clock gating of I2C2 and I2C3.
We use I2C2 in a (not yet mainlined) device tree.

Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:38 +08:00
Frank Li 8f6d8094b2 ARM: imx: add imx7d clk tree support
Add i.MX7D clk tree support.

Enable all clock to bring up imx7.
Clock framework need be modified a little since imx7d
change clock design. otherwise system will halt and block the
other part upstream.

All clock refine need wait for Dong Aisheng's patch
clk: support clocks which requires parent clock on during operation
Or other solution ready.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:37 +08:00
Frank Li f53947456f ARM: clk: imx: update pllv3 to support imx7
Add type IMX_PLLV3_ENET_IMX7

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:37 +08:00
Stefan Agner d930d56825 ARM: imx: clk-vf610: enable debug access port by default
Enabled DAP (debug access port) by default. This enables the hw-
breakpoint framework to make use of the breakpoints and watchpoints
supported by hardware.

[    0.215805] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.224624] hw-breakpoint: maximum watchpoint size is 4 bytes.

Without this clock, the hw-breakpoint driver claims an undefined
instruction during initialization:
[    0.227380] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[    0.227519] hw-breakpoint: CPU 0 failed to disable vector catch

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:36 +08:00
Fabio Estevam a39973a4fd clk: imx: clk-cpu: Include "clk.h" header file
Include the "clk.h" header file to fix the following sparse warning:

drivers/clk/imx/clk-cpu.c:77:12: warning: symbol 'imx_clk_cpu' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:34 +08:00
Anson Huang 7a5568ce08 ARM: imx: using unsigned variable for do_div
The definition of do_div uses unsigned long long
variable as its first parameter, better to pass
a u64 variable as first parameter when calling
do_div function.

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:49:32 +08:00
Shawn Guo de8e434d09 ARM: imx: drop epit timer initialization from imx35 clock driver
EPIT provides another timer implementation besides the default GPT
timer.  The imx35 clock driver will use EPIT timer when option
CONFIG_MXC_USE_EPIT is enabled.  However, initializing timers from
clock driver is a workaround solution and causes problem when we move
clock drivers into driver/clk.

Let's simply drop the EPIT initialization from there.  If people really
want this EPIT option, EPIT timer driver needs to be reworked to do the
initialization in a standard way - use CLOCKSOURCE_OF_DECLARE() with
device tree support.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:33 +08:00
Shawn Guo 11f6812009 ARM: imx: move clock drivers into drivers/clk
After the cleanup on clock drivers, they are now ready to be moved into
drivers/clk.  Let's move them into drivers/clk/imx folder.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-03 14:44:33 +08:00
Tero Kristo 989feafb84 clk: ti: move low-level access and init code under clock driver
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo e9e63088e4 clk: ti: remove exported ll_ops struct, instead add an API for registration
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:46 +03:00
Tero Kristo a3314e9cf6 clk: ti: move some public definitions to private header
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo c9a58b0a84 clk: ti: am3517: move remaining am3517 clock support code to clock driver
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:45 +03:00
Tero Kristo f2671d5c6c clk: ti: omap34xx: move omap34xx clock type support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:37 +03:00
Tero Kristo bd86cfdcbd clk: ti: clkdm: move clkdm gate clock support code to clock driver
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:30 +03:00
Tero Kristo d5a04dddf5 clk: ti: omap2430: move clock support code under clock driver
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:29 +03:00
Tero Kristo 9f37e90efa clk: ti: dflt: move support for default gate clock to clock driver
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:22 +03:00
Tero Kristo 0565fb168d clk: ti: dpll: move omap3 DPLL functionality to clock driver
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:14 +03:00
Tero Kristo a5aa8a603e clk: ti: move omap2_clk_enable_init_clocks under clock driver
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:13 +03:00
Tero Kristo bf22bae794 clk: ti: autoidle: move generic autoidle handling code to clock driver
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:31:13 +03:00
Tero Kristo ef14db0977 clk: ti: move interface clock implementation under drivers/clk
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:59 +03:00
Tero Kristo 59245ce01a clk: ti: move OMAP4+ DPLL implementation under drivers/clk
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:58 +03:00
Tero Kristo b138b0283d clk: ti: move generic OMAP DPLL implementation under drivers/clk
With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:58 +03:00
Tero Kristo f3b19aa5ca ARM: OMAP2+: clock: export driver API to setup/get clock features
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-06-02 12:30:58 +03:00
Hans de Goede ec80749dfd clk: sunxi: Add support for the usb-clk on sun8i a23 and a33 SoCs
The usb-clk on sun8i a23 and a33 SoCs is similar to the ones found
on sun6i-a31 SoCs but instead of a 3th phy the a23 / a33 have a hsic
interface which gets enabled by almost the same bits as used on
the a31 for the 3rd phy, but not exactly the same bits so we need
a new compatible for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-06-02 10:24:39 +02:00
Stephen Boyd f7b81d67d0 clk: qcom: Add support for NSS/GMAC clocks and resets
Add the NSS/GMAC clocks and the TCM clock and NSS resets.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30 17:04:36 -07:00
Dinh Nguyen 5343325ff3 clk: socfpga: add a clock driver for the Arria 10 platform
The clocks on the Arria 10 platform is a bit different than the
Cyclone/Arria 5 platform that it should just have it's own
driver.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21 15:16:04 -07:00
Dinh Nguyen 5611a5ba8e clk: socfpga: update clk.h so for Arria10 platform to use
There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver
can use.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21 15:10:38 -07:00
Shailendra Verma 004cbb475f clk: clk-conf: Fix typo in comment
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21 11:55:05 -07:00
Shailendra Verma c306317a0e clk: samsung: Fix typo in panic log
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21 11:54:55 -07:00
Axel Lin 8cdea5022d clk: cdce706: Add missing of_clk_del_provider call in cdce706_remove
Remove a previously registered clock provider when unload the module.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-21 11:53:23 -07:00
Shailendra Verma a59a516398 clk: Fix typo in clk_register() comment
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-20 15:44:32 -07:00
Zhiwu Song 301c5d2940 clk: sirf: add CSR atlas7 clk and reset support
the hardware node includes both clock and reset support, so it
is named as "car".
this patch implements Flexible clocks(mux, divider, gate), Selectable
clock(mux, divider, gate), root clock(gate),leaf clock(gate), others.
it also implements the reset controller functionality.

Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: Guo Zeng <Guo.Zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-20 15:43:28 -07:00
Ricky Liang 95f589814c clk: mediatek: Initialize clk_init_data
The variable init (struct clk_init_data) is allocated on the stack.
We weren't initializing the .flags field, so it contains random junk,
which can cause all kinds of interesting issues when the flags are
parsed by clk_register.

Signed-off-by: Ricky Liang <jcliang@chromium.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-19 18:40:48 -07:00
Antoine Tenart fd26031ba6 clk: berlin: drop direct of_iomap of nodes reg property
The Berlin clock driver was sharing a DT node with the pin controller
and the reset driver. All these devices are now sub-nodes of the chip
controller. This patch rework the Berlin clock driver to allow moving
the Berlin clock DT bindings into their own sub-node of the chip
controller node.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-05-18 18:10:13 +02:00
Antoine Tenart 26b3b6b959 clk: berlin: prepare simple-mfd conversion
Prepare conversion of berlin clk drivers to a simple-mfd sub-node by
checking for parent node compatible. If parent node is "syscon" compatible
use it for of_iomap instead of the own node.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2015-05-18 18:10:09 +02:00
Rob Herring df5338d9fe clk: mmp: add PXA1928 clock support
Add initial clock support for Marvell PXA1928. The PXA1928 is a mobile
SOC and is similar to other MMP/PXA series of SOCs, so a lot of the
existing infrastructure is reused here.

Currently the PLLs are just fixed clocks, and not all leaf clocks are
implemented.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-15 12:31:45 -07:00
Chanwoo Choi 2885c3b2a3 clk: Show correct information when fail to set clock rate
This patch shows the correct information for debugging when fail
to set clock rate because original error message shows the error
value instead of current clock rate.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-15 09:55:27 -07:00
Stephen Boyd 64a12c56ad clk: Kconfig: Move bcm Kconfig into clk menu
Having this Kconfig sourced outside the clk menu means the option
is under the "Device Drivers" menu instead of the "Common Clock
Framework" menu. Move it so that the bcm clock config options are
in the right place.

Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:39:54 -07:00
Stephen Boyd 6c4178163a clk: u300: Silence sparse warnings
drivers/clk/clk-u300.c:1175:13: warning: symbol 'u300_clk_init' was not declared. Should it be static?

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:31 -07:00
Stephen Boyd 61ad23a14a clk: moxart: Silence sparse warnings
drivers/clk/clk-moxart.c:18:13: warning: symbol 'moxart_of_pll_clk_init' was not declared. Should it be static?
drivers/clk/clk-moxart.c:56:13: warning: symbol 'moxart_of_apb_clk_init' was not declared. Should it be static?

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:31 -07:00
Stephen Boyd 6ae5fd3812 clk: xgene: Silence sparse warnings
drivers/clk/clk-xgene.c:77:43: warning: incorrect type in argument 1 (different address spaces)
drivers/clk/clk-xgene.c:77:43:    expected void *csr
drivers/clk/clk-xgene.c:77:43:    got void [noderef] <asn:2>*
...
drivers/clk/clk-xgene.c: In function ‘xgene_clk_enable’:
drivers/clk/clk-xgene.c:237:3: warning: format ‘%LX’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ [-Wformat]
drivers/clk/clk-xgene.c:248:3: warning: format ‘%LX’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ [-Wformat]

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:30 -07:00
Stephen Boyd 52127755fe clk: mmp: Silence sparse warnings
drivers/clk/mmp/clk-apbc.c:118:16: warning: symbol 'clk_apbc_ops' was not declared. Should it be static?
drivers/clk/mmp/clk-apmu.c:64:16: warning: symbol 'clk_apmu_ops' was not declared. Should it be static?

Cc: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:29 -07:00
Stephen Boyd e45310bfcd clk: socfpga: Silence sparse warning
drivers/clk/socfpga/clk-periph.c:79:39: warning: Using plain integer as NULL pointer

Cc: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:28 -07:00
Stephen Boyd 11bee5e19a clk: versatile: Silence sparse warnings
drivers/clk/versatile/clk-sp810.c:159:29: error: incompatible types for operation (<=)
drivers/clk/versatile/clk-sp810.c:159:29:    left side has type char const *<noident>
drivers/clk/versatile/clk-sp810.c:159:29:    right side has type int
drivers/clk/versatile/clk-sp810.c:159:53: error: incompatible types for operation (<=)
drivers/clk/versatile/clk-sp810.c:159:53:    left side has type char const *<noident>
drivers/clk/versatile/clk-sp810.c:159:53:    right side has type int
drivers/clk/versatile/clk-sp810.c:138:13: warning: symbol 'clk_sp810_of_setup' was not declared. Should it be static?

Acked: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:27 -07:00
Stephen Boyd 412d6b47cc clk: ti: Silence sparse warnings
drivers/clk/ti/clk.c:125:31: warning: incorrect type in return expression (different address spaces)
drivers/clk/ti/clk.c:125:31:    expected void [noderef] <asn:2>*
drivers/clk/ti/clk.c:125:31:    got void *
drivers/clk/ti/clk.c:132:31: warning: incorrect type in return expression (different address spaces)
drivers/clk/ti/clk.c:132:31:    expected void [noderef] <asn:2>*
drivers/clk/ti/clk.c:132:31:    got void *
drivers/clk/ti/dpll.c:180:14: warning: symbol '_get_reg' was not declared. Should it be static?
drivers/clk/ti/fapll.c:624:32: warning: Using plain integer as NULL pointer
drivers/clk/ti/fapll.c:625:31: warning: Using plain integer as NULL pointer
drivers/clk/ti/fapll.c:630:40: warning: Using plain integer as NULL pointer
drivers/clk/ti/clk-dra7-atl.c:158:22: warning: symbol 'atl_clk_ops' was not declared. Should it be static?
drivers/clk/ti/clk-dra7-atl.c:170:39: warning: Using plain integer as NULL pointer

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:26 -07:00
Stephen Boyd 8e6dd77ccc clk: st: Silence sparse warnings
drivers/clk/st/clkgen-mux.c:134:4: warning: symbol 'clkgena_divmux_get_parent' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:171:15: warning: symbol 'clkgena_divmux_recalc_rate' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:218:12: warning: symbol 'clk_register_genamux' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:388:13: warning: symbol 'st_of_clkgena_divmux_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:488:13: warning: symbol 'st_of_clkgena_prediv_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:625:13: warning: symbol 'st_of_clkgen_mux_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-mux.c:702:13: warning: symbol 'st_of_clkgen_vcc_setup' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:273:15: warning: symbol 'recalc_stm_pll800c65' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:300:15: warning: symbol 'recalc_stm_pll1600c65' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:324:15: warning: symbol 'recalc_stm_pll3200c32' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:346:15: warning: symbol 'recalc_stm_pll1200c32' was not declared. Should it be static?
drivers/clk/st/clkgen-pll.c:565:19: warning: incorrect type in assignment (different address spaces)
drivers/clk/st/clkgen-pll.c:565:19:    expected void [noderef] <asn:2>*reg
drivers/clk/st/clkgen-pll.c:565:19:    got void *
drivers/clk/st/clkgen-pll.c:576:18: warning: incorrect type in assignment (different address spaces)
drivers/clk/st/clkgen-pll.c:576:18:    expected void [noderef] <asn:2>*reg
drivers/clk/st/clkgen-pll.c:576:18:    got void *
drivers/clk/st/clkgen-pll.c:693:53: warning: incorrect type in argument 2 (different address spaces)
drivers/clk/st/clkgen-pll.c:693:53:    expected void *[noderef] <asn:2>reg
drivers/clk/st/clkgen-pll.c:693:53:    got void [noderef] <asn:2>*[assigned] pll_base
drivers/clk/st/clkgen-fsyn.c:495:5: warning: symbol 'clk_fs660c32_vco_get_rate' was not declared. Should it be static?
drivers/clk/st/clkgen-fsyn.c:522:5: warning: symbol 'clk_fs660c32_vco_get_params' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:119:15: warning: symbol 'flexgen_recalc_rate' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:177:12: warning: symbol 'clk_register_flexgen' was not declared. Should it be static?
drivers/clk/st/clk-flexgen.c:263:13: warning: symbol 'st_of_flexgen_setup' was not declared. Should it be static?

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:26 -07:00
Stephen Boyd b011d386e9 clk: socfpga: Silence sparse warning
drivers/clk/socfpga/clk-gate.c:227:40: warning: Using plain integer as NULL pointer

Cc: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:25 -07:00
Stephen Boyd f53f551b11 clk: sirf: Silence sparse warnings
These are __iomem pointers. Mark them appropriately so we don't
get sparse errors like

drivers/clk/sirf/clk-common.c:60:16: warning: incorrect type in argument 1 (different address spaces)
drivers/clk/sirf/clk-common.c:60:16:    expected void const volatile [noderef] <asn:2>*addr
drivers/clk/sirf/clk-common.c:60:16:    got void *

Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:24 -07:00
Stephen Boyd 43f535702b clk: emev2: Silence sparse warnings
drivers/clk/shmobile/clk-emev2.c:37:14: warning: symbol 'smu_base' was not declared. Should it be static?

Cc: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Cc: Magnus Damm <damm@opensource.se>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:23 -07:00
Stephen Boyd f6704f9e19 clk: samsung: Silence sparse warnings
drivers/clk/samsung/clk-exynos5260.c:138:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:328:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:392:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:494:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:583:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:644:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:779:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:898:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:962:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:1018:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:1165:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:1373:40: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-exynos5260.c:1829:40: warning: Using plain integer as NULL pointer

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:22 -07:00
Stephen Boyd 4a77f817b3 clk: hix5hd2: Silence sparse warnings
drivers/clk/hisilicon/clk-hix5hd2.c:255:13: warning: symbol 'hix5hd2_clk_register_complex' was not declared. Should it be static?

Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:21 -07:00
Stephen Boyd 47c18e4cd9 clk: berlin: Silence sparse warning
drivers/clk/berlin/berlin2-pll.c:94:12: warning: symbol 'berlin2_pll_register' was not declared. Should it be static?

Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:21 -07:00
Stephen Boyd 7926b3f8c6 clk: bcm/kona: Remove ccu_list
This list doesn't look to be used. Let's remove it and any
associated code that would be manipulating this list. This also
silences this error:

drivers/clk/bcm/clk-kona-setup.c:24:1: warning: symbol 'ccu_list' was not declared. Should it be static?

Reviewed-by: Alex Elder <elder@linaro.org>
Cc: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:20 -07:00
Stephen Boyd 4cca1be4bc clk: bcm/kona: Silence sparse warnings
drivers/clk/bcm/clk-kona.c:1243:16: warning: odd constant _Bool cast (ffffffffffffffea becomes 1)

Reviewed-by: Alex Elder <elder@linaro.org>
Cc: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:19 -07:00
Stephen Boyd 9a39222db6 clk: max-gen: Silence sparse warnings
drivers/clk/clk-max-gen.c:82:16: warning: symbol 'max_gen_clk_ops' was not declared. Should it be static?
drivers/clk/clk-max-gen.c:109:5: warning: symbol 'max_gen_clk_probe' was not declared. Should it be static?
drivers/clk/clk-max-gen.c:183:5: warning: symbol 'max_gen_clk_remove' was not declared. Should it be static?

Acked-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:18 -07:00
Stephen Boyd 562ef0b098 clk: Silence sparse warnings about __clk_{get,put}()
drivers/clk/clk.c:2700:5: warning: symbol '__clk_get' was not declared. Should it be static?
drivers/clk/clk.c:2713:6: warning: symbol '__clk_put' was not declared. Should it be static?

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:17 -07:00
Stephen Boyd 2bb5d1b88b clk: gpio-gate: Don't export __init functions
This function is marked as __init, so exposing it to modules
doesn't make any sense and it isn't used by modules anyway.

drivers/clk/clk-gpio-gate.c:192:13: warning: symbol 'of_gpio_gate_clk_setup' was not declared. Should it be static?

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 17:11:16 -07:00
Stephen Boyd d122db7e86 clk: basic-types: Remove useless allocation failure printks
Printing an error on kmalloc() failures is unnecessary. Remove
the print and use *ptr in sizeof() for future-proof code.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 16:51:50 -07:00
Krzysztof Kozlowski e0cdcda508 clk: ti: dra7-atl-clock: Fix possible ERR_PTR dereference
of_clk_get_from_provider() returns ERR_PTR on failure. The
dra7-atl-clock driver was not checking its return value and
immediately used it in __clk_get_hw().  __clk_get_hw()
dereferences supplied clock, if it is not NULL, so in that case
it would dereference an ERR_PTR.

Fixes: 9ac33b0ce8 ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-14 14:04:18 -07:00