Fred has taken over the cxl maintenance I was doing. This updates the
MAINTAINERS file to reflect this.
It also removes a duplicate entry in the files covered and adds an entry
for the CXL PCI code in arch/powerpc.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If we fail to allocate work, we don't end up using hp_errlog_copy. Free it
in the error path.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we merge two contiguous partitions whose signatures are marked
NVRAM_SIG_FREE, We need update prev's length and checksum, then write it
to nvram, not cur's. So lets fix this mistake now.
Also use memset instead of strncpy to set the partition's name. It's
more readable if we want to fill up with duplicate chars .
Fixes: fa2b4e54d4 ("powerpc/nvram: Improve partition removal")
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If kmemdup fails, We need kfree *buff* first then return -ENOMEM.
Otherwise there is a memory leak.
Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mtmsrd with L=1 only affects MSR_EE and MSR_RI bits, and we always
know what state those bits are, so the kernel MSR does not need to be
loaded when modifying them.
mtmsrd is often in the critical execution path, so avoiding dependency
on even L1 load is noticable. On a POWER8 this saves about 3 cycles
from the syscall path, and possibly a few from other exception returns
(not measured).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mflr r10 instruction was left over from when the code used LR to
branch to system_call_entry from the exception handler. That was
changed by commit 6a404806df ("powerpc: Avoid link stack corruption in
MMU on syscall entry path") to use the count register. The value is
never used now, so mflr can be removed, and r10 can be used for storage
rather than spilling to the SPR scratch register.
The scratch register spill causes a long pipeline stall due to the SPR
read after write. This change brings getppid syscall cost from 406 to
376 cycles on POWER8. getppid for non-relocatable case is 371 cycles.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For hugetlb to work with 4K page size, we need MAX_ORDER to be 13 or
more. When switching from a 64K page size to 4K linux page size using
make oldconfig, we end up with a CONFIG_FORCE_MAX_ZONEORDER value of 9.
This results in a 16M hugepage beiing considered as a gigantic huge page
which in turn results in failure to setup hugepages if gigantic hugepage
support is not enabled.
This also results in kernel crash with 4K radix configuration. We
hit the below BUG_ON on radix:
kernel BUG at mm/huge_memory.c:364!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=2048 NUMA PowerNV
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc1-00006-gbae9cc6 #1
task: c0000000f1af8000 task.stack: c0000000f1aec000
NIP: c000000000c5fa0c LR: c000000000c5f9d8 CTR: c000000000c5f9a4
REGS: c0000000f1aef920 TRAP: 0700 Not tainted (4.8.0-rc1-00006-gbae9cc6)
MSR: 9000000102029033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE,TM[E]> CR: 24000844 XER: 00000000
CFAR: c000000000c5f9e0 SOFTE: 1
....
NIP [c000000000c5fa0c] hugepage_init+0x68/0x238
LR [c000000000c5f9d8] hugepage_init+0x34/0x238
Fixes: a7ee539584 ("powerpc/Kconfig: Update config option based on page size")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: Santhosh <santhog4@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add some documentation for the 64-bit syscall ABI, which doesn't seem
to be documented elsewhere.
This attempts to document existing practice. The only small discrepancy
is glibc clobbers not quite matching the kernel (e.g., xer, some
vsyscalls trash cr1 whereas glibc only clobbers cr0). These will be
resolved after this document is merged.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The HMI (Hypervisor Maintenance Interrupt) is defined by the
architecture to be higher priority than other maskable interrupts, so
replay it first, as a best-effort to replay according to hardware
priorities.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In our linker script we open code the list of text sections, because we
need to include the __ftr_alt sections, which are arch-specific.
This means we can't use TEXT_TEXT as defined in vmlinux.lds.h, and so we
don't have the MEM_KEEP() logic for memory hotplug sections.
If we build the kernel with the gold linker, and with CONFIG_MEMORY_HOTPLUG=y,
we see that functions marked __meminit can end up outside of the
_stext/_etext range, and also outside of _sinittext/_einittext, eg:
c000000000000000 T _stext
c0000000009e0000 A _etext
c0000000009e3f18 T hash__vmemmap_create_mapping
c000000000ca0000 T _sinittext
c000000000d00844 T _einittext
This causes them to not be recognised as text by is_kernel_text(), and
prevents them being patched by jump_label (and presumably ftrace/kprobes
etc.).
Fix it by adding MEM_KEEP() directives, mirroring what TEXT_TEXT does.
This isn't a problem when CONFIG_MEMORY_HOTPLUG=n, because we use the
standard INIT_TEXT_SECTION() and EXIT_TEXT macros from vmlinux.lds.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the _GLOBAL() macro unilaterally sets the assembler section to
".text" at the start of the macro. This is rude as the caller may be
using a different section.
So let the caller decide which section to emit the code into. On big
endian we do need to switch to the ".opd" section to emit the OPD, but
do that with pushsection/popsection, thereby leaving the original
section intact.
I verified that the order of all entries in System.map is unchanged
after this patch. The actual addresses shift around slightly so you
can't just diff the System.map.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than forcing the whole function into the ".kprobes.text" section,
just add the symbol's address to the kprobe blacklist.
This also lets us drop the three versions of the_KPROBE macro, in
exchange for just one version of _ASM_NOKPROBE_SYMBOL - which is a good
cleanup.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we mark the C implementations of some exception handlers as
__kprobes. This has the effect of putting them in the ".kprobes.text"
section, which separates them from the rest of the text.
Instead we can use the blacklist macros to add the symbols to a
blacklist which kprobes will check. This allows the linker to move
exception handler functions close to callers and avoids trampolines in
larger kernels.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Reword change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally, when MSR[VSX/VR/SPE] bits == 1, the used_vsr/used_vr/used_spe
bit have already been set. However when loading a signal frame from user
space we need to explicitly set used_vsr/used_vr/used_spe to make them
consistent with the MSR bits from the signal frame.
For example, CRIU application, who utilizes sigreturn to restore
checkpointed process, will lead to the case where MSR[VSX] bit is active
in signal frame, but used_vsr bit is not set in the kernel. (the same
applies to VR/SPE).
This patch fixes this by always setting used_* bit when MSR related bits
are active in signal frame and we are doing sigreturn.
Based on a proposal by Benh.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ckpt_regs usage in gpr32_set_common/gpr32_get_common() will lead to
following cppcheck error at ifndef CONFIG_PPC_TRANSACTIONAL_MEM case:
[arch/powerpc/kernel/ptrace.c:2062]:
(error) Uninitialized variable: ckpt_regs
[arch/powerpc/kernel/ptrace.c:2130]:
(error) Uninitialized variable: ckpt_regs
The problem is due to gpr32_set_common() used ckpt_regs variable which
only makes sense at #ifdef CONFIG_PPC_TRANSACTIONAL_MEM.
This patch fix this issue by passing in "regs" parameter instead.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When set_sl_ops() is called, the adapter data structure is not fully
initialized yet. Therefore the device name is not showing up in the
trace. Fix is simply to get the device name from the pci_dev
structure.
Fixes: 6d382616ac ("cxl: Abstract the differences between the PSL and XSL")
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The message is missing a \n, add it. Switch to pr_warn(), it's shorter
and less ugly.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Power9 DD1 requires to update the hid0 register when switching from
hash to radix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 requires pte to be marked invalid (V=0) before updating
it with the new value. This makes this distinction for the different
revisions.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD1 uses RTS - 28 for the RTS value but other revisions use
RTS - 31. This makes this distinction for the different revisions
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The of_node for the SB600 (io-bridge) has its device_type set to
'io-bridge' Set it to 'isa' so that it can be found by
isa_bridge_find_early() instead of using patches in the kernel.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The device tree on the Nemo passes all of the i8259 interrupts with
numbers between 212 and 222, and points their interrupt-parent property
to the pasemi-opic, requiring custom patches to the kernel. Fix the
values so that they can be controlled by the generic ppc i8259 code.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
[mpe: Rework deeply nested if and boundary checks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add config option for the Nemo motherboard used in the Amigaone X1000.
This is a custom PASemi board with an AMD SB600 southbridge, and needs
some patches to it device tree. This option will be used to build these
into the kernel
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Checkpatch.pl warns about usage of asm/io.h. Use linux/io.h instead.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trivial fix to spelling mistake in dev_warn message and remove
extraneous trailing whitespace at end of the message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 2578bfae84 ("[POWERPC] Create and use CONFIG_WORD_SIZE") added
CONFIG_WORD_SIZE, and suggests that other arches were going to do
likewise.
But that never happened, powerpc is the only architecture which uses it.
So switch to using a simple make variable, BITS, like x86, sh, sparc and
tile. It is also easier to spell and simpler, avoiding any confusion
about whether it's defined due to ordering of make vs kconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some of the rules in the boot Makefile use @ to hide the command, this
means "make V=1" doesn't show them, which is confusing.
So use the Kbuild standard $(Q) which means KBUILD_VERBOSE=1 or V=1 will
work as expected.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In fact it makes no sense at all to have this defined on little endian
builds. Since we disabled the 32-bit VDSO on little endian, we don't
build any 32-bit code when building a little endian kernel.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The LOAD_HANDLER macro requires that you have previously loaded "reg"
with PACAKBASE. Although that gives callers flexibility to get PACAKBASE
in some interesting way, none of the callers actually do that. So fold
the load of PACAKBASE into the macro, making it simpler for callers to
use correctly.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The comment for LOAD_HANDLER() was wrong. The part about kdump has not
been true since 1f6a93e4c3 ("powerpc: Make it possible to move the
interrupt handlers away from the kernel").
Describe how it currently works, and combine the two separate comments
into one.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, if userspace or the kernel accesses a completely bogus address,
for example with any of bits 46-59 set, we first take an SLB miss interrupt,
install a corresponding SLB entry with VSID 0, retry the instruction, then
take a DSI/ISI interrupt because there is no HPT entry mapping the address.
However, by the time of the second interrupt, the Come-From Address Register
(CFAR) has been overwritten by the rfid instruction at the end of the SLB
miss interrupt handler. Since bogus accesses can often be caused by a
function return after the stack has been overwritten, the CFAR value would
be very useful as it could indicate which function it was whose return had
led to the bogus address.
This patch adds code to create a full exception frame in the SLB miss handler
in the case of a bogus address, rather than inserting an SLB entry with a
zero VSID field. Then we call a new slb_miss_bad_addr() function in C code,
which delivers a signal for a user access or creates an oops for a kernel
access. In the latter case the oops message will show the CFAR value at the
time of the access.
In the case of the radix MMU, a segment miss interrupt indicates an access
outside the ranges mapped by the page tables. Previously this was handled
by the code for an unrecoverable SLB miss (one with MSR[RI] = 0), which is
not really correct. With this patch, we now handle these interrupts with
slb_miss_bad_addr(), which is much more consistent.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and
add command to dump SPRs") I added two uses of the "ld" instruction in
spr_access.S. "ld" is a 64-bit instruction, so shouldn't be used on
32-bit CPUs.
Replace it with PPC_LL which is a macro that gives us either "ld" or
"lwz" depending on whether we're 64 or 32-bit.
Fixes: 31cdd0c39c ("powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs")
Cc: stable@vger.kernel.org # v4.7+
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Another set of things that are only called from assembler and so need
prototypes to keep sparse happy.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Firmware Assisted Dump is a facility to dump kernel core with assistance
from firmware. As part of this process the kernel ELF ABI version is
stored in the core file.
Currently fadump.h defines this to 0 if it is not already defined. This
clashes with a define in elf.h which sets it based on the current task -
not based on the kernel's ELF ABI version.
Use the compiler-provided #define _CALL_ELF which tells us the ELF ABI
version of the kernel to set e_flags, this matches what binutils does.
Remove the definition in fadump.h, which becomes unused.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Squash a bunch of sparse warnings by making things static.
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse checking revealed that it is no longer used. The last usage was
removed in commit 2e19458312 ("[POWERPC] Cell interrupt rework") in
2006.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 fix from Thomas Gleixner:
"A single fix for an AMD erratum so machines without a BIOS fix work"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/AMD: Apply erratum 665 on machines without a BIOS fix
Pull timer fixes from Thomas Gleixner:
"Two fixlet from the timers departement:
- A fix for scheduler stalls in the tick idle code affecting
NOHZ_FULL kernels
- A trivial compile fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Fix softlockup on scheduler stalls in kvm guest
clocksource/drivers/atmel-pit: Fix compilation error
generated by bcache)
- 2 other stable fixes for DM log-writes
- a stable fix for a DM crypt bug that could result in freeing pointers
from uninitialized memory in the tfm allocation error path
- a DM bufio cleanup to discontinue using create_singlethread_workqueue()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXybwpAAoJEMUj8QotnQNaVjIIALIS2erGyUquUcFALyGzK0So
f3GUA3+o/1ttkzkHvDwdgPO0CscVsAp71hMN+3+GrPtXJZRoqlE/w2QfGLYHvV++
xZR4+kBYuKrlo7+ldvjEi4KI2YtZ541QyaRez7Vy8XKDBo54cFe9oUnGznOYIC+2
+oH0d2w933rrFgsUa3RFa+8Qyv2ch6SAhDhn6oy0vk7HhH8MIGQKMDQEHVRbgfJ9
kG45wakb4rDDzmxqT+ZyA8rNk4sV+WanNVfj/7mww/NZe4HW+O7xMJTVgUqczADu
Sny4VhQOk6w4rpooDeJ2djWHUi8THtX1W616Owu701fmQ9ttALEw0xiZXEOYzBA=
=v6+u
-----END PGP SIGNATURE-----
Merge tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a stable fix in both DM crypt and DM log-writes for too large bios
(as generated by bcache)
- two other stable fixes for DM log-writes
- a stable fix for a DM crypt bug that could result in freeing pointers
from uninitialized memory in the tfm allocation error path
- a DM bufio cleanup to discontinue using create_singlethread_workqueue()
* tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: remove use of deprecated create_singlethread_workqueue()
dm crypt: fix free of bad values after tfm allocation failure
dm crypt: fix error with too large bios
dm log writes: fix check of kthread_run() return value
dm log writes: fix bug with too large bios
dm log writes: move IO accounting earlier to fix error path
Pull btrfs fixes from Chris Mason:
"I'm still prepping a set of fixes for btrfs fsync, just nailing down a
hard to trigger memory corruption. For now, these are tested and ready."
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket()
Btrfs: fix endless loop in balancing block groups
Btrfs: kill invalid ASSERT() in process_all_refs()
Here are a number of small driver fixes for 4.8-rc5.
The largest thing here is deleting an obsolete driver,
drivers/misc/bh1780gli.c, as the functionality of it was replaced by an
iio driver a while ago. The other fixes are things that have been
reported, or reverts of broken stuff (the binder change). All of these
changes have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK3/MPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspm5MAoLb+
VGesoc7cGbFN0EIskollZRzBAJ9Wnhvu3rVeDQYCA0t9+uRg0CcpWw==
=Wt/v
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 4.8-rc5.
The largest thing here is deleting an obsolete driver,
drivers/misc/bh1780gli.c, as the functionality of it was replaced by
an iio driver a while ago.
The other fixes are things that have been reported, or reverts of
broken stuff (the binder change). All of these changes have been in
linux-next for a while with no reported issues"
* tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Don't declare Falcon Ridge unsupported
thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.
thunderbolt: Fix resume quirk for Falcon Ridge 4C.
lkdtm: Mark lkdtm_rodata_do_nothing() notrace
mei: me: disable driver on SPT SPS firmware
Revert "android: binder: fix dangling pointer comparison"
drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup
android: binder: fix dangling pointer comparison
misc: delete bh1780 driver
Here are 3 small fixes for 4.8-rc5.
One for sysfs, one for kernfs, and one documentation fix, all for
reported issues. All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK30APHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspfk8AnjB+
nWc9F3GbEhS211M7gCiby8eFAJ0QGl9iPSuIUMZ5RdkfTjAj/Un3JA==
=Yfb4
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small fixes for 4.8-rc5.
One for sysfs, one for kernfs, and one documentation fix, all for
reported issues. All of these have been in linux-next for a while"
* tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: correctly handle read offset on PREALLOC attrs
documentation: drivers/core/of: fix name of of_node symlink
kernfs: don't depend on d_find_any_alias() when generating notifications
Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4HoPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspt0MAn0wC
dYhZOUHxOptLiEkVGXFCU9kzAJ4gETEbuGn9lgp2TFATOOAN7oqPUw==
=6MKk
-----END PGP SIGNATURE-----
Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in
linux-next with no reported issues"
* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
arm: dts: rockchip: add reset node for the exist saradc SoCs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: accel: kxsd9: Fix raw read return
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
include/linux: fix excess fence.h kernel-doc notation
staging: wilc1000: correctly check if associatedsta has not been found
staging: wilc1000: NULL dereference on error
staging: wilc1000: txq_event: Fix coding error
MAINTAINERS: Add file patterns for ion device tree bindings
MAINTAINERS: Update maintainer entry for wilc1000
iio: chemical: atlas-ph-sensor: fix typo in val assignment
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: dt2811: fix a precedence bug
staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
...
Here are some small serial driver fixes for 4.8-rc5. One fixes an
oft-reported build issue with the fintek driver, another reverts a patch
that was causing problems, one fixes a crash, and some new device ids
were added.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4ScPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspmEcAn0FE
lUzWBQb4to15YXhl8wtNF9ZbAJ9Gi2r5MEfXlnLStI3XM/gq8BdXGw==
=pkwv
-----END PGP SIGNATURE-----
Merge tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 4.8-rc5. One fixes an
oft-reported build issue with the fintek driver, another reverts a
patch that was causing problems, one fixes a crash, and some new
device ids were added.
All of these have been in linux-next for a while"
* tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: added acces i/o products quad and octal serial cards
serial: 8250_mid: fix divide error bug if baud rate is 0
Revert "tty/serial/8250: use mctrl_gpio helpers"
8250/fintek: rename IRQ_MODE macro
Here are some USB and PHY driver fixes for 4.8-rc5
Nothing major, lots of little fixes for reported bugs, and a build fix
for a missing .h file that the phy drivers needed. All of these have
been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4h8PHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspLTMAoMNL
Q3TlSgupOTzsV1MMRdRMuU6fAJ4/jMOV5h8XTx9ETmhx8N9RB63QTw==
=RTNl
-----END PGP SIGNATURE-----
Merge tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are some USB and PHY driver fixes for 4.8-rc5
Nothing major, lots of little fixes for reported bugs, and a build fix
for a missing .h file that the phy drivers needed. All of these have
been in linux-next for a while with no reported issues"
* tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: musb: Fix locking errors for host only mode
usb: dwc3: gadget: always decrement by 1
usb: dwc3: debug: fix ep name on trace output
usb: gadget: udc: core: don't starve DMA resources
USB: serial: option: add WeTelecom 0x6802 and 0x6803 products
USB: avoid left shift by -1
USB: fix typo in wMaxPacketSize validation
usb: gadget: Add the gserial port checking in gs_start_tx()
usb: dwc3: gadget: don't rely on jiffies while holding spinlock
usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()
usb: gadget: function: f_rndis: socket buffer may be NULL
usb: gadget: function: f_eem: socket buffer may be NULL
usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()
usb: dwc2: Add reset control to dwc2
usb: dwc3: core: allow device to runtime_suspend several times
usb: dwc3: pci: runtime_resume child device
USB: serial: option: add WeTelecom WM-D200
usb: chipidea: udc: don't touch DP when controller is in host mode
USB: serial: mos7840: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
...
Michael Neuling