The lbr_context logic confused me; it appears to me to try and do the
same thing the pmu::sched_task() callback does now, but limited to
per-task events.
So rip it out. Afaict this should also improve performance, because I
think the current code can end up doing lbr_reset() twice, once from
the pmu::add() and then again from pmu::sched_task(), and MSR writes
(all 3*16 of them) are expensive!!
While thinking through the cases that need the reset it occured to me
the first install of an event in an active context needs to reset the
LBR (who knows what crap is in there), but detecting this case is
somewhat hard.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By the time we call pmu::add(), event->ctx must be set, and we
even already rely on this, so remove that test from
intel_pmu_lbr_add().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since pmu::del() is always called under perf_pmu_disable(), the block
conditional on cpuc->enabled is dead.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently perf_sched_cb_{inc,dec}() are called from
pmu::{start,stop}(), which has the problem that this can happen from
NMI context, this is making it hard to optimize perf_pmu_sched_task().
Furthermore, we really only need this accounting on pmu::{add,del}(),
so doing it from pmu::{start,stop}() is doing more work than we really
need.
Introduce x86_pmu::{add,del}() and wire up the LBR and PEBS.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The whole rdmsr()/wrmsr() for lbr_from got a little unweildy with the
sign extension quirk, provide a few simple wrappers to clean things up.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add quirk for context switch to save/restore the value of
MSR_LAST_BRANCH_FROM_x when LBR is enabled and there is potential for
kernel addresses to be in the lbr_from register.
To test this patch, use a perf tool and kernel with the patch
next in this series. That patch removes the work around that masked
the hw bug:
$ ./lbr_perf record --call-graph lbr -e cycles:k sleep 1
where lbr_perf is the patched perf tool, that allows to specify :k
on lbr mode. The above command will trigger a #GPF :
WARNING: CPU: 28 PID: 14096 at arch/x86/mm/extable.c:65 ex_handler_wrmsr_unsafe+0x70/0x80
unchecked MSR access error: WRMSR to 0x681 (tried to write 0x1fffffff81010794)
...
Call Trace:
[<ffffffff8167af49>] dump_stack+0x4d/0x63
[<ffffffff810b9b15>] __warn+0xe5/0x100
[<ffffffff810b9be9>] warn_slowpath_fmt+0x49/0x50
[<ffffffff810abb40>] ex_handler_wrmsr_unsafe+0x70/0x80
[<ffffffff810abc42>] fixup_exception+0x42/0x50
[<ffffffff81079d1a>] do_general_protection+0x8a/0x160
[<ffffffff81684ec2>] general_protection+0x22/0x30
[<ffffffff810101b9>] ? intel_pmu_lbr_sched_task+0xc9/0x380
[<ffffffff81009d7c>] intel_pmu_sched_task+0x3c/0x60
[<ffffffff81003a2b>] x86_pmu_sched_task+0x1b/0x20
[<ffffffff81192a5b>] perf_pmu_sched_task+0x6b/0xb0
[<ffffffff8119746d>] __perf_event_task_sched_in+0x7d/0x150
[<ffffffff810dd9dc>] finish_task_switch+0x15c/0x200
[<ffffffff8167f894>] __schedule+0x274/0x6cc
[<ffffffff8167fdd9>] schedule+0x39/0x90
[<ffffffff81675398>] exit_to_usermode_loop+0x39/0x89
[<ffffffff810028ce>] prepare_exit_to_usermode+0x2e/0x30
[<ffffffff81683c1b>] retint_user+0x8/0x10
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1466533874-52003-5-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Intel's SDM states that bits 61:62 in MSR_LAST_BRANCH_FROM_x are the
TSX flags for formats with LBR_TSX flags (i.e. LBR_FORMAT_EIP_EFLAGS2).
However, when the CPU has TSX support deactivated, bits 61:62 actually
behave as follows:
- For wrmsr(), bits 61:62 are considered part of the sign extension.
- When capturing branches, the LBR hw will always clear bits 61:62.
regardless of the sign extension.
Therefore, if:
1) LBR has TSX format.
2) CPU has no TSX support enabled.
... then any value passed to wrmsr() must be sign extended to 63 bits
and any value from rdmsr() must be converted to have a sign extension
of 61 bits, ignoring the values at TSX flags.
This bug was masked by the work-around to the Intel's CPU bug:
BJ94. "LBR May Contain Incorrect Information When Using FREEZE_LBRS_ON_PMI"
in Document Number: 324643-037US.
The aforementioned work-around uses hw flags to filter out all kernel
branches, limiting LBR callstack to user level execution only.
Since user addresses are not sign extended, they do not trigger the wrmsr()
bug in MSR_LAST_BRANCH_FROM_x when saved/restored at context switch.
To verify the hw bug:
$ perf record -b -e cycles sleep 1
$ rdmsr -p 0 0x680
0x1fffffffb0b9b0cc
$ wrmsr -p 0 0x680 0x1fffffffb0b9b0cc
write(): Input/output error
The quirk for LBR_FROM_ MSRs is required before calls to wrmsrl() and
after rdmsrl().
This patch introduces it for wrmsrl()'s done for testing LBR support.
Future patch in series adds the quirk for context switch, that would
be required if LBR callstack is to be enabled for ring 0.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1466533874-52003-3-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
338b522ca4 ("perf/x86/intel: Protect LBR and extra_regs against KVM lying")
added an additional test to LBR support detection that is performed after
printing the LBR support statement to dmesg.
Move the LBR support output after the very last test, to make sure we
print the true status of LBR support.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1466533874-52003-2-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes a bug which was introduced by:
b16a5b52eb ("perf/x86: Add option to disable reading branch flags/cycles")
In this patch, lbr_sel_mask is used to mask the lbr_select. But LBR_SEL_MASK
doesn't include the bit for LBR_CALL_STACK. So LBR call stack will never be
set in lbr_select.
This patch corrects the LBR_SEL_MASK by including all valid bits in
LBR_SELECT. Also, the LBR_CALL_STACK bit is different as other bit in
LBR_SELECT. It does not operate in suppress mode, so it needs to be
specially handled in intel_pmu_setup_hw_lbr_filter.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1461231010-4399-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
LBR filtering is also supported on the Silvermont and Airmont
microarchitectures. The layout of MSR_LBR_SELECT is the same as Nehalem.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1460706825-46163-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add perf core PMU support for Intel Goldmont CPU cores:
- The init code is based on Silvermont.
- There is a new cache event list, based on the Silvermont cache event list.
- Goldmont has 32 LBR entries. It also uses new LBRv6 format, which
report the cycle information using upper 16-bit of the LBR_TO.
- It's recommended to use CPU_CLK_UNHALTED.CORE_P + NPEBS for precise cycles.
For details, please refer to the latest SDM058:
http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-vol-3b-part-2-manual.pdf
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1460706167-45320-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that all functionality has been moved to arch/x86/events/, move the
perf_event.h header and adjust include paths.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1455098123-11740-18-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra