Update the flow steering command formatting according to the extended
destination API.
Note that the FW dictates that multi destination FTEs that involve at
least one encap must use the extended destination format, while single
destination ones must use the legacy format.
Using extended destination format requires FW support. Check for its
capabilities and return error if not supported.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Change the driver flow destination struct to use bit flags with the vhca
id valid being the 1st one. The flags field is more extendable and will
be used in downstream patch.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Extended destinations provide the ability to configure different
encapsulation properties per destination on a single FTE. This is
needed for use-cases such as remote mirroring over tunneled networks.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
GRE RFC defines a 32 bit key field. NVGRE RFC splits the 32 bit
key field to 24 bit VSID (gre_key_h) and 8 bit flow entropy (gre_key_l).
Define the two key parsing alternatives in a union, thus enabling both
access methods.
Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Will be used in downstream patch to monitor counter changes
by the HCA and report it to the driver by an event.
The driver will update its counters cached data accordingly.
Signed-off-by: Eyal Davidovich <eyald@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Support a new hardware module status in port module events:
- module_status=0x4 (Cable plugged, but disabled)
Signed-off-by: Mikhael Goikhman <migo@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Support a new hardware error type in port module events:
- error_type=0xc (PCIe system power slot exceeded)
Signed-off-by: Mikhael Goikhman <migo@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add explicit HW defined error values. For simplicity, keep counters for all
statuses starting from 0, although currently status=0 is not used.
Additionally, when HW signals an unexpected cable status, it is reported
now rather than ignored. And status counter is now updated on errors.
Signed-off-by: Mikhael Goikhman <migo@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After the following flow counters API refactoring:
("net/mlx5: Use flow counter IDs and not the wrapping cache object")
flow counters private data structures mlx5_fc_cache and mlx5_fc are
redundantly exposed in fs_core.h, they have nothing to do with flow
steering core and they are private to fs_counter.c, this patch moves them
to where they belong and reduces their exposure in the driver.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use the new helper that extracts the opcode
from a CQE (completion queue entry) structure.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Introduce and use a helper that extracts the opcode
from a CQE (completion queue entry) structure.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The function is only used to retrieve CQEs, use the proper type as the
return value.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Packet based credit mode bit determines whether the credit mode
is done per message or packet. Expose the QP creation flag and
the HCA capability.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Expose device capabilities for DEVX user context, it includes which caps
the device is supported and a matching bit to set as part of user
context creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to perform modify_rmp in two separate function,
while one of them uses stack as a placeholder for data while other
allocates it dynamically. Combine those two functions to one call
instead of two.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to perform create_rmp in two separate function, while
one of them uses stack as a placeholder for data while other allocates
it dynamically. Combine those two functions to one instead of two.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Transfer initialization and cleanup from mlx5_priv struct of
mlx5_core_dev to be part of mlx5_ib_dev. This completes removal
of SRQ from mlx5_core.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reflect the change of moving SRQ code from mlx5_core to mlx5_ib by
updating function signatures do not require mlx5_core_dev as an input,
because all operations in mlx5_ib are supposed to use mlx5_ib_dev.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reuse existing infrastructure to initialize and release DEVX uid.
The DevX interface is intended for user space access, so it is supposed
to be initialized before ib_register_device(). Also it isn't supported
in switchdev mode and don't need to initialize it in that mode.
Fixes: 76dc5a8406 ("IB/mlx5: Manage device uid for DEVX white list commands")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
SRQ signature is not supported, hence no need for special static
global variable to announce it.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to keep SRQ which is RDMA object in mlx5_core.
In this patch, we partially move the execution code, while next patches
will move table initialization/release logic too.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
As a preparation to move SRQ functionality to RDMA, drop all references
to mlx5_core logic and make SRQ be dependent on shared code only.
Most of the time, we are interested to know if events are working/not
working and it is possible with previous commit ("net/mlx5: Debug print
for forwarded async events").
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
lib/eq.h is needed for EQ manipulation which are not performed in SRQ.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Delete functions which are not called and not needed.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Ensure that both RDMA and netdev parts of SRQ implementation
has same copyright and license information annotated by SPDX
tags.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Print a debug message for every async FW event forwarded to mlx5
interfaces (mlx5e netdev and mlx5_ib rdma module).
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Allow forwarding of SRQ events to mlx5_core interfaces, e.g. mlx5_ib.
Use mlx5_notifier_register/unregister in srq.c in order to allow seamless
transition of srq.c to infiniband subsystem.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Allow forwarding QP and WQ events to mlx5_core interfaces, e.g. mlx5_ib
Use mlx5_notifier_register/unregister in qp.c in order to allow seamless
transition of qp.c to infiniband subsystem.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Before the new mlx5 event notification infrastructure and API,
mlx5_core used to process all events before forwarding them to mlx5
interfaces (mlx5e/mlx5_ib) and used to translate the event type enum
to a software defined enum, this is not needed anymore since it is ok
for mlx5e and mlx5_ib to receive FW events as is, at least the few ones
mlx5 core allows.
mlx5e and mlx5_ib already moved to use the new API and they only handle FW
events types, it is now safe to remove all equivalent software defined
events and the logic around them.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Handle FW general event rq delay drop as it was received from FW via mlx5
notifiers API, instead of handling the processed software version of that
event. After this patch we can safely remove all software processed FW
events types and definitions.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
FW general event is used by mlx5_ib for RQ delay drop timeout event
handling, in this patch we allow to forward FW general event type to mlx5
notifiers chain so mlx5_ib can handle it and to deprecate the software
version of it.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use the FW version of the port change event as forwarded via new mlx5
notifiers API.
After this patch, processed software version of the port change event
will become deprecated and will be totally removed in downstream
patches.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The mlx5_interface->event callback is not used by mlx5e/mlx5_ib anymore.
We totally remove the delayed events logic work around, since with
the dynamic notifier registration API it is not needed anymore, mlx5_ib
can register its notifier and start receiving events exactly at the moment
it is ready to handle them.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the deprecated mlx5_interface->event mlx5_ib callback and use new
mlx5 notifier API to subscribe for mlx5 events.
For native mlx5_ib devices profiles pf_profile/nic_rep_profile register
the notifier callback mlx5_ib_handle_event which treats the notifier
context as mlx5_ib_dev.
For vport repesentors, don't register any notifier, same as before, they
didn't receive any mlx5 events.
For slave port (mlx5_ib_multiport_info) register a different notifier
callback mlx5_ib_event_slave_port, which knows that the event is coming
for mlx5_ib_multiport_info and prepares the event job accordingly.
Before this on the event handler work we had to ask mlx5_core if this is
a slave port mlx5_core_is_mp_slave(work->dev), now it is not needed
anymore.
mlx5_ib_multiport_info notifier registration is done on
mlx5_ib_bind_slave_port and de-registration is done on
mlx5_ib_unbind_slave_port.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This to allow seamless migration to the new notifier chain API, and to
eventually deprecate interfaces dev->event callback.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the deprecated mlx5_interface->event mlx5e callback and use new
mlx5 notifier API to subscribe for mlx5 events, handle port change event
as received from FW rather than handling the mlx5 core processed port
change software version event.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The idea is to allow mlx5 core interfaces (mlx5e/mlx5_ib) to be able to
receive some allowed FW events as is via the new notifier API.
In this patch we allow forwarding port change event to mlx5 core interfaces
(mlx5e/mlx5_ib) as it was received from FW.
Once mlx5e and mlx5_ib start using this event we can safely remove the
redundant software version of it and its translation logic.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use atomic notifier chain to fire events to mlx5 core driver
consumers (mlx5e/mlx5_ib) and provide mlx5 register/unregister notifier
API.
This API will replace the current mlx5_interface->event callback and all
the logic around it, especially the delayed events logic introduced by
commit 97834eba7c ("net/mlx5: Delay events till ib registration ends")
Which is not needed anymore with this new API where the mlx5 interface
can dynamically register/unregister its notifier.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Register a separate handler per event type, rather than listening for all
events and looking for the events to handle in a switch case.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Move all the generic async events handling into new specific events
handling file events.c to keep eq.c file clean from concrete event logic
handling.
Use new API to register for NOTIFY_ANY to handle generic events and
dispatch allowed events to mlx5_core consumers (mlx5_ib and mlx5e)
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_eq_cq_event on MLX5_EVENT_TYPE_CQ_ERROR
and register a specific CQ ERROR handler via the new API.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to QP/SRQ resources events handlers on several FW
events and let resources logic register resources events notifiers via the
new API.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_cmd_comp_handler on MLX5_EVENT_TYPE_CMD
and let command interface to register its own handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_core_req_pages_handler on
MLX5_EVENT_TYPE_PAGE_REQUEST and let FW page logic to register its own
handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_eswitch_vport_event on
MLX5_EVENT_TYPE_NIC_VPORT_CHANGE and let the eswitch register its own
handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_pps_event on MLX5_EVENT_TYPE_PPS_EVENT
and let clock logic to register its own handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_fpga_event on
MLX5_EVENT_TYPE_FPGA_ERROR or MLX5_EVENT_TYPE_FPGA_QP_ERROR
let fpga core to register its own handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the explicit call to mlx5_fw_tracer_event on
MLX5_EVENT_TYPE_DEVICE_TRACER and let fw tracer to register
its own handler when its ready.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use atomic_notifier_chain to fire firmware events at internal mlx5 core
components such as eswitch/fpga/clock/FW tracer/etc.., this is to
avoid explicit calls from low level mlx5_core to upper components and to
simplify the mlx5_core API for future developments.
Simply provide register/unregister notifiers API and call the notifier
chain on firmware async events.
Example: to subscribe to a FW event:
struct mlx5_nb port_event;
MLX5_NB_INIT(&port_event, port_event_handler, PORT_CHANGE);
mlx5_eq_notifier_register(mdev, &port_event);
where:
- port_event_handler is the notifier block callback.
- PORT_EVENT is the suffix of MLX5_EVENT_TYPE_PORT_CHANGE.
The above will guarantee that port_event_handler will receive all FW
events of the type MLX5_EVENT_TYPE_PORT_CHANGE.
To receive all FW/HW events one can subscribe to
MLX5_EVENT_TYPE_NOTIFY_ANY.
The next few patches will start moving all mlx5 core components to use
this new API and cleanup mlx5_eq_async_int misx handler from component
explicit calls and specific logic.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
These are one/two liner generic EQ access methods, better have them
declared static inline in eq.h.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Eli Britstein