The variable tx_ring is unnecessary to be initialized as it will be set
before used, and the variable rst_cnt is better to be initialized when
declaration for simplification.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits
and the length of netdev's name is IFNAMSIZ, the total length
of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even
though '*_int_idx' will never have such large value, but the
compiler gives a format-truncation warning for this case.
So this patch just enlarges the length to avoid this warning.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To unify code style and make code simpler, this patch modifies
some code, deletes unnecessary blank lines and {}, changes
location of code, and so on.
No functional change.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make the code more readable, this patch replaces
some magic numbers with macro or sizeof operation.
Also uses macro lower_32_bits and upper_32_bits to
get bits 0-31 and 32-63 of a number, instead of
using type conversion and '>>' operation.
No functional change.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When there is a TX timeout, we can tell if the driver or stack
has stopped the queue by looking at state field, and when has
the last packet transmited by looking at trans_start field.
So this patch prints these two field in the
hns3_get_tx_timeo_queue_info().
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reset fails, there is some information that will help for
finding out why does reset fail. and removes an unused
core_rst_cnt field in struct hclge_rst_stats.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* HT operation is not allowed on channel 14 (Japan only)
* netlink policy for nexthop attribute was wrong
-----BEGIN PGP SIGNATURE-----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=B0D8
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2019-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two fixes:
* HT operation is not allowed on channel 14 (Japan only)
* netlink policy for nexthop attribute was wrong
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sheetal Tigadoli says:
====================
bnxt_en: Add OP-TEE based bnxt f/w manager
This patch series adds support for TEE based BNXT firmware
management module and the driver changes to invoke OP-TEE
APIs to fastboot firmware and to collect crash dump.
Changes from v4:
- update Kconfig to reflect dependency on TEE driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver supports 2 types of core dumps.
1. Live dump - Firmware dump when system is up and running.
2. Crash dump - Dump which is collected during firmware crash
that can be retrieved after recovery.
Crash dump is currently supported only on specific 58800 chips
which can be retrieved using OP-TEE API only, as firmware cannot
access this region directly.
User needs to set the dump flag using following command before
initiating the dump collection:
$ ethtool -W|--set-dump eth0 N
Where N is "0" for live dump and "1" for crash dump
Command to collect the dump after setting the flag:
$ ethtool -w eth0 data Filename
v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n.
Also change log message to netdev_info().
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In error recovery process when firmware indicates that it is
completely down, initiate a firmware reset by calling OP-TEE API.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver registers on TEE bus to interact with OP-TEE based
BNXT firmware management modules
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Make port split code more generic
Jiri says:
Currently, we assume some limitations and constant values which are not
applicable for Spectrum-3 which has 8 lanes ports (instead of previous 4
lanes).
This patch does 2 things:
1) Generalizes the code to not use constants so it can work for 4, 8 and
possibly 16 lanes.
2) Enforces some assumptions we had in the code but did not check.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the check generic for any possible value, not only 2 and 4.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During recreation of original unsplit ports, just simply iterate over
the whole gap and recreate whatever originally existed.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code considers only split by 2 or 4. Make the base port
getting generic and allow split by 8 to be handled correctly. Generalize
the used port checks as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using constant value, use port_module_max_width which is
aligned with the cluster size.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't compute the original base local port during unsplit, rather
remember it in mlxsw_sp_port structure during split port creation.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in
two split ports each of 4 lanes. Add a resource that can be used to
obtain local port offset in that case.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Get local port offsets of split port in a separate helper function and
use it in both split and unsplit function.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver assumes certain values in the PMLP register. Add checks that
verify that PMLP register provides fitting values.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the port mapping structure down to create, module_map and other
function instead of individual values.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use constant max width value and instead of that, use the actual
width of the port. Also don't pass module value and use the value
stored in the same structure.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the initial PMLP register configuration into array of structures
instead of just simple array of module numbers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when user does split, he is not able to distinguish if the
port cannot be split because it is already split, or because it cannot
be split at all. Add another check for split flag to distinguish this.
Also add check forbidding split when maximal width is 1.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that the port cannot be split further should be checked before
checking the count, so move it.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the max module width is hard-coded according to ASIC type.
That is not entirely correct, as the max module width might differ
per-board. Use PMTM register to query FW for maximal width of a module.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMTM allows query or configuration of module types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx/rx lane fields got extended to 4 bits, update the reg field
description accordingly.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code causes a static analysis warning:
block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use '__skb_queue_purge()' instead of re-implementing it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
v1->v2: addressed Andrii's feedback
When BTF-enabled raw_tp were introduced the plan was to follow up
with BTF-enabled kprobe and kretprobe reusing PROG_RAW_TRACEPOINT
and PROG_KPROBE types. But k[ret]probe expect pt_regs while
BTF-enabled program ctx will be the same as raw_tp.
kretprobe is indistinguishable from kprobe while BTF-enabled
kretprobe will have access to retval while kprobe will not.
Hence PROG_KPROBE type is not reusable and reusing
PROG_RAW_TRACEPOINT no longer fits well.
Hence introduce 'umbrella' prog type BPF_PROG_TYPE_TRACING
that will cover different BTF-enabled tracing attach points.
The changes make libbpf side cleaner as well.
check_attach_btf_id() is cleaner too.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf program type raw_tp together with 'expected_attach_type'
was the most appropriate api to indicate BTF-enabled raw_tp programs.
But during development it became apparent that 'expected_attach_type'
cannot be used and new 'attach_btf_id' field had to be introduced.
Which means that the information is duplicated in two fields where
one of them is ignored.
Clean it up by introducing new program type where both
'expected_attach_type' and 'attach_btf_id' fields have
specific meaning.
In the future 'expected_attach_type' will be extended
with other attach points that have similar semantics to raw_tp.
This patch is replacing BTF-enabled BPF_PROG_TYPE_RAW_TRACEPOINT with
prog_type = BPF_RPOG_TYPE_TRACING
expected_attach_type = BPF_TRACE_RAW_TP
attach_btf_id = btf_id of raw tracepoint inside the kernel
Future patches will add
expected_attach_type = BPF_TRACE_FENTRY or BPF_TRACE_FEXIT
where programs have the same input context and the same helpers,
but different attach points.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191030223212.953010-2-ast@kernel.org
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <will@kernel.org>
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX already ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write. Removing
all the conditionals simplifies the code.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch also makes the code for the two vendors more similar
while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors.
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
kvm_create_vm() error path" which was not committed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The driver exposes EFI runtime services to user-space through an IOCTL
interface, calling the EFI services function pointers directly without
using the efivar API.
Disallow access to the /dev/efi_test character device when the kernel is
locked down to prevent arbitrary user-space to call EFI runtime services.
Also require CAP_SYS_ADMIN to open the chardev to prevent unprivileged
users to call the EFI runtime services, instead of just relying on the
chardev file mode bits for this.
The main user of this driver is the fwts [0] tool that already checks if
the effective user ID is 0 and fails otherwise. So this change shouldn't
cause any regression to this tool.
[0]: https://wiki.ubuntu.com/FirmwareTestSuite/Reference/uefivarinfo
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Matthew Garrett <mjg59@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-7-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, kernel fails to boot on some HyperV VMs when using EFI.
And it's a potential issue on all x86 platforms.
It's caused by broken kernel relocation on EFI systems, when below three
conditions are met:
1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR)
by the loader.
2. There isn't enough room to contain the kernel, starting from the
default load address (eg. something else occupied part the region).
3. In the memmap provided by EFI firmware, there is a memory region
starts below LOAD_PHYSICAL_ADDR, and suitable for containing the
kernel.
EFI stub will perform a kernel relocation when condition 1 is met. But
due to condition 2, EFI stub can't relocate kernel to the preferred
address, so it fallback to ask EFI firmware to alloc lowest usable memory
region, got the low region mentioned in condition 3, and relocated
kernel there.
It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This
is the lowest acceptable kernel relocation address.
The first thing goes wrong is in arch/x86/boot/compressed/head_64.S.
Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output
address if kernel is located below it. Then the relocation before
decompression, which move kernel to the end of the decompression buffer,
will overwrite other memory region, as there is no enough memory there.
To fix it, just don't let EFI stub relocate the kernel to any address
lower than lowest acceptable address.
[ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The EFI stubloader for ARM starts out by allocating a 32 MB window
at the base of RAM, in order to ensure that the decompressor (which
blindly copies the uncompressed kernel into that window) does not
overwrite other allocations that are made while running in the context
of the EFI firmware.
In some cases, (e.g., U-Boot running on the Raspberry Pi 2), this is
causing boot failures because this initial allocation conflicts with
a page of reserved memory at the base of RAM that contains the SMP spin
tables and other pieces of firmware data and which was put there by
the bootloader under the assumption that the TEXT_OFFSET window right
below the kernel is only used partially during early boot, and will be
left alone once the memory reservations are processed and taken into
account.
So let's permit reserved memory regions to exist in the region starting
at the base of RAM, and ending at TEXT_OFFSET - 5 * PAGE_SIZE, which is
the window below the kernel that is not touched by the early boot code.
Tested-by: Guillaume Gardet <Guillaume.Gardet@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Chester Lin <clin@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 428826f535 ("fdt: add support for rng-seed") introduced
add_bootloader_randomness(), permitting randomness provided by the
bootloader or firmware to be credited as entropy. However, the fact
that the UEFI support code was already wired into the RNG subsystem
via a call to add_device_randomness() was overlooked, and so it was
not converted at the same time.
Note that this UEFI (v2.4 or newer) feature is currently only
implemented for EFI stub booting on ARM, and further note that
CONFIG_RANDOM_TRUST_BOOTLOADER must be enabled, and this should be
done only if there indeed is sufficient trust in the bootloader
_and_ its source of randomness.
[ ardb: update commit log ]
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently nothing checks the return value of efi_tpm_eventlog_init(),
but in case that changes in the future make sure an error is
returned when it fails to determine the tpm final events log
size.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: e658c82be5 ("efi/tpm: Only set 'efi_tpm_final_log_size' after ...")
Link: https://lkml.kernel.org/r/20191029173755.27149-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For the EFI_RCI2_TABLE Kconfig option, 'make oldconfig' asks the user
for input on platforms where the option may not be applicable. This patch
modifies the Kconfig option to ask the user for input only when CONFIG_X86
or CONFIG_COMPILE_TEST is set to y.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Narendra K <Narendra.K@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191029173755.27149-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Few fixes on the dmaengine drivers:
- fix in sprd driver for link list and potential memory leak
- tegra transfer failure fix
- imx size check fix for script_number
- xilinx fix for 64bit AXIDMA and control reg update
- qcom bam dma resource leak fix
- cppi slave transfer fix when idle
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl26hEgACgkQfBQHDyUj
g0cAjRAAweFLgnBti+Cqb3mjbHxYfSknw/4CNis5XvhXfCGUupgqQQfL1mjH1ZGv
GPz0lOjgkaUwtioxMrIqGSc/7MCsHOK02kktfY87SSraSQrKF2Hl9Y0KRYu8FIWW
AFvmbhXAtLqRY87r6K/S7LzQzSrYjfGHxHV5ShsA18+2Y2gtuQQ2V6nbkjZquOle
So27cjAZXYQJP9YI2DJXpcgwe2DSO2cgfcLH58t6Prw4/piJf7P1Qhs/ng5Egfbe
RahP8AdTSjRf2ylVHngaM5EFuDsjn/uslEfh93dL4gQH/NWqNgTbk02R0HtwrRjs
F8EVNsDqVjWrc1D/tKWUucYVMDdGHmNovN0sGESbuVBgUKwqjrhLMrEzxs2d0cgN
h2YRbPnAHRmO/F0x789TGFsw3BU0T/gAl+LrVFUBCKvhwtEtsG6rmX1wjSVca3lM
zMhV9oipMUBPSVQQhyIf/yizEqw0YkgFKelQppb6e/I+OBgQGYchgaiQtbNcI4L2
jOkQ7dsFPL8a8bmN+r38IzJMjHp5F+Govuc+1nmhuALpGxgBtmEqzgzBiP3AZgcJ
XjkKW3IQdK+TAcqA6eDFLlm33Npe+flXQ/QvJlpYfHLDzZx2CNQExaFVo4meNwDu
iGajKgP9DhO6l7uaep2mDxMPz7u/edhfvHy6cjWUIH9KjwPZ64w=
=e87E
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes to the dmaengine drivers:
- fix in sprd driver for link list and potential memory leak
- tegra transfer failure fix
- imx size check fix for script_number
- xilinx fix for 64bit AXIDMA and control reg update
- qcom bam dma resource leak fix
- cppi slave transfer fix when idle"
* tag 'dmaengine-fix-5.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idle
dmaengine: qcom: bam_dma: Fix resource leak
dmaengine: sprd: Fix the possible memory leak issue
dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
dmaengine: imx-sdma: fix size check for sdma script_number
dmaengine: tegra210-adma: fix transfer failure
dmaengine: sprd: Fix the link-list pointer register configuration issue
Haiyang Zhang says:
====================
hv_netvsc: fix error handling in netvsc_attach/set_features
The error handling code path in these functions are not correct.
This patch set fixes them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0c ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.
Fixes: d6792a5a07 ("hv_netvsc: Add handler for LRO setting change")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes: 94cdb8bb99 ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov says:
====================
Control action percpu counters allocation by netlink flag
Currently, significant fraction of CPU time during TC filter allocation
is spent in percpu allocator. Moreover, percpu allocator is protected
with single global mutex which negates any potential to improve its
performance by means of recent developments in TC filter update API that
removed rtnl lock for some Qdiscs and classifiers. In order to
significantly improve filter update rate and reduce memory usage we
would like to allow users to skip percpu counters allocation for
specific action if they don't expect high traffic rate hitting the
action, which is a reasonable expectation for hardware-offloaded setup.
In that case any potential gains to software fast-path performance
gained by usage of percpu-allocated counters compared to regular integer
counters protected by spinlock are not important, but amount of
additional CPU and memory consumed by them is significant.
In order to allow configuring action counters allocation type at
runtime, implement following changes:
- Implement helper functions to update the action counters and use them
in affected actions instead of updating counters directly. This steps
abstracts actions implementation from counter types that are being
used for particular action instance at runtime.
- Modify the new helpers to use percpu counters if they were allocated
during action initialization and use regular counters otherwise.
- Extend action UAPI TCA_ACT space with TCA_ACT_FLAGS field. Add
TCA_ACT_FLAGS_NO_PERCPU_STATS action flag and update
hardware-offloaded actions to not allocate percpu counters when the
flag is set.
With this changes users that prefer action update slow-path speed over
software fast-path speed can dynamically request actions to skip percpu
counters allocation without affecting other users.
Now, lets look at actual performance gains provided by this change.
Simple test is used to measure insertion rate - iproute2 TC is executed
in parallel by xargs in batch mode, its total execution time is measured
by shell builtin "time" command. The command runs 20 concurrent tc
instances, each with its own batch file with 100k rules:
$ time ls add* | xargs -n 1 -P 20 sudo tc -b
Two main rule profiles are tested. First is simple L2 flower classifier
with single gact drop action. The configuration is chosen as worst case
scenario because with single-action rules pressure on percpu allocator
is minimized. Example rule:
filter add dev ens1f0 protocol ip ingress prio 1 handle 1 flower skip_hw
src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 action drop
Second profile is typical real-world scenario that uses flower
classifier with some L2-4 fields and two actions (tunnel_key+mirred).
Example rule:
filter add dev ens1f0_0 protocol ip ingress prio 1 handle 1 flower
skip_hw src_mac e4:11:0:0:0:0 dst_mac e4:12:0:0:0:0 src_ip
192.168.111.1 dst_ip 192.168.111.2 ip_proto udp dst_port 1 src_port
1 action tunnel_key set id 1 src_ip 2.2.2.2 dst_ip 2.2.2.3 dst_port
4789 action mirred egress redirect dev vxlan1
Profile | percpu | no_percpu | X improvement
| (k rules/sec) | (k rules/sec) |
-------------------+---------------+---------------+---------------
Gact drop | 203 | 259 | 1.28
tunnel_key+mirred | 92 | 204 | 2.22
For simple drop action removing percpu allocation leads to ~25%
insertion rate improvement. Perf profiles highlights the bottlenecks.
Perf profile of run with percpu allocation (gact drop):
+ 89.11% 0.48% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 88.58% 0.04% tc [kernel.vmlinux] [k] do_syscall_64
+ 87.50% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 86.96% 0.04% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 86.85% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 86.60% 0.05% tc [kernel.vmlinux] [k] sock_sendmsg
+ 86.55% 0.12% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 86.04% 0.13% tc [kernel.vmlinux] [k] netlink_unicast
+ 85.42% 0.03% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 84.68% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 84.56% 0.24% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.73% 0.65% tc [cls_flower] [k] fl_change
+ 71.30% 0.03% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 71.27% 0.13% tc [kernel.vmlinux] [k] tcf_action_init
+ 71.06% 0.01% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 70.41% 0.04% tc [act_gact] [k] tcf_gact_init
+ 53.59% 1.21% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 52.34% 0.34% tc [kernel.vmlinux] [k] tcf_idr_create
- 51.23% 2.17% tc [kernel.vmlinux] [k] pcpu_alloc
- 49.05% pcpu_alloc
+ 39.35% __mutex_lock.isra.0 4.99% memset_erms
+ 2.16% pcpu_alloc_area
+ 2.17% __libc_sendmsg
+ 45.89% 44.33% tc [kernel.vmlinux] [k] osq_lock
+ 9.94% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 7.76% 0.00% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 6.50% 0.03% tc [kernel.vmlinux] [k] tfilter_notify
+ 6.24% 6.11% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.73% 5.32% tc [kernel.vmlinux] [k] memset_erms
+ 5.31% 0.18% tc [kernel.vmlinux] [k] tcf_fill_node
Here bottleneck is clearly in pcpu_alloc() function that takes more than
half CPU time, which is mostly wasted busy-waiting for internal percpu
allocator global lock.
With percpu allocation removed (gact drop):
+ 87.50% 0.51% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 86.94% 0.07% tc [kernel.vmlinux] [k] do_syscall_64
+ 85.75% 0.04% tc libc-2.29.so [.] __libc_sendmsg
+ 85.00% 0.07% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 84.84% 0.07% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 84.59% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 84.58% 0.14% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.95% 0.12% tc [kernel.vmlinux] [k] netlink_unicast
+ 83.34% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 82.39% 0.12% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 82.16% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 75.13% 0.84% tc [cls_flower] [k] fl_change
+ 69.92% 0.05% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.87% 0.11% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.61% 0.02% tc [kernel.vmlinux] [k] tcf_action_init_1
- 68.80% 0.10% tc [act_gact] [k] tcf_gact_init
- 68.70% tcf_gact_init
+ 36.08% tcf_idr_check_alloc
+ 31.88% tcf_idr_insert
+ 63.72% 0.58% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 58.80% 56.68% tc [kernel.vmlinux] [k] osq_lock
+ 36.08% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 31.88% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
The gact actions (like all other actions types) are inserted in single
idr instance protected by global (per namespace) lock that becomes new
bottleneck with such simple rule profile and prevents achieving 2x+
performance increase that can be expected by looking at profiling data
for insertion action with percpu counter.
Perf profile of run with percpu allocation (tunnel_key+mirred):
+ 91.95% 0.21% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 91.74% 0.06% tc [kernel.vmlinux] [k] do_syscall_64
+ 90.74% 0.01% tc libc-2.29.so [.] __libc_sendmsg
+ 90.52% 0.01% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 90.50% 0.04% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 90.41% 0.02% tc [kernel.vmlinux] [k] sock_sendmsg
+ 90.38% 0.04% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 90.10% 0.06% tc [kernel.vmlinux] [k] netlink_unicast
+ 89.76% 0.01% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 89.28% 0.04% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 89.15% 0.03% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 83.41% 0.33% tc [cls_flower] [k] fl_change
+ 81.17% 0.04% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 81.13% 0.06% tc [kernel.vmlinux] [k] tcf_action_init
+ 81.04% 0.04% tc [kernel.vmlinux] [k] tcf_action_init_1
- 73.59% 2.16% tc [kernel.vmlinux] [k] pcpu_alloc
- 71.42% pcpu_alloc
+ 61.41% __mutex_lock.isra.0 5.02% memset_erms
+ 2.93% pcpu_alloc_area
+ 2.16% __libc_sendmsg
+ 63.58% 0.17% tc [kernel.vmlinux] [k] tcf_idr_create
+ 63.40% 0.60% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 57.85% 56.38% tc [kernel.vmlinux] [k] osq_lock
+ 46.27% 0.13% tc [act_tunnel_key] [k] tunnel_key_init
+ 34.26% 0.02% tc [act_mirred] [k] tcf_mirred_init
+ 10.99% 0.00% tc [kernel.vmlinux] [k] dst_cache_init
+ 5.32% 5.11% tc [kernel.vmlinux] [k] memset_erms
With two times more actions pressure on percpu allocator doubles, so now
it takes ~74% of CPU execution time.
With percpu allocation removed (tunnel_key+mirred):
+ 86.02% 0.50% tc [kernel.vmlinux] [k] entry_SYSCALL_64
+ 85.51% 0.12% tc [kernel.vmlinux] [k] do_syscall_64
+ 84.40% 0.03% tc libc-2.29.so [.] __libc_sendmsg
+ 83.84% 0.03% tc [kernel.vmlinux] [k] __sys_sendmsg
+ 83.72% 0.01% tc [kernel.vmlinux] [k] ___sys_sendmsg
+ 83.56% 0.01% tc [kernel.vmlinux] [k] sock_sendmsg
+ 83.50% 0.08% tc [kernel.vmlinux] [k] netlink_sendmsg
+ 83.02% 0.17% tc [kernel.vmlinux] [k] netlink_unicast
+ 82.48% 0.00% tc [kernel.vmlinux] [k] netlink_rcv_skb
+ 81.89% 0.11% tc [kernel.vmlinux] [k] rtnetlink_rcv_msg
+ 81.71% 0.25% tc [kernel.vmlinux] [k] tc_new_tfilter
+ 73.99% 0.63% tc [cls_flower] [k] fl_change
+ 69.72% 0.00% tc [kernel.vmlinux] [k] tcf_exts_validate
+ 69.72% 0.09% tc [kernel.vmlinux] [k] tcf_action_init
+ 69.53% 0.05% tc [kernel.vmlinux] [k] tcf_action_init_1
+ 53.08% 0.91% tc [kernel.vmlinux] [k] __mutex_lock.isra.0
+ 45.52% 43.99% tc [kernel.vmlinux] [k] osq_lock
- 36.02% 0.21% tc [act_tunnel_key] [k] tunnel_key_init
- 35.81% tunnel_key_init
+ 15.95% tcf_idr_check_alloc
+ 13.91% tcf_idr_insert
- 4.70% dst_cache_init
+ 4.68% pcpu_alloc
+ 33.22% 0.04% tc [kernel.vmlinux] [k] tcf_idr_check_alloc
+ 32.34% 0.05% tc [act_mirred] [k] tcf_mirred_init
+ 28.24% 0.01% tc [kernel.vmlinux] [k] tcf_idr_insert
+ 7.79% 0.05% tc [kernel.vmlinux] [k] idr_alloc_u32
+ 7.67% 7.35% tc [kernel.vmlinux] [k] idr_get_free
+ 6.46% 6.22% tc [kernel.vmlinux] [k] mutex_spin_on_owner
+ 5.11% 0.05% tc [kernel.vmlinux] [k] tfilter_notify
With percpu allocation removed insertion rate is increased by ~120%.
Such rule profile scales much better than simple single action because
both types of actions were competing for single lock in percpu
allocator, but not for action idr lock, which is per-action. Note that
percpu allocator is still used by dst_cache in tunnel_key actions and
consumes 4.68% CPU time. Dst_cache seems like good opportunity for
further insertion rate optimization but is not addressed by this change.
Another improvement provided by this change is significantly reduced
memory usage. The test is implemented by sampling "used memory" value
from "vmstat -s" command output. Following table includes memory usage
measurements for same two configurations that were used for measuring
insertion rate:
Profile | Mem per rule | Mem per rule no_percpu | Less memory used
| (KB) | (KB) | (KB)
-------------------+--------------+------------------------+------------------
Gact drop | 3.91 | 2.51 | 1.4
tunnel_key+mirred | 6.73 | 3.91 | 2.8
Results indicate that memory usage of percpu allocator per action is
~1.4 KB. Note that any measurements of percpu allocator memory usage is
inherently tied to particular setup since memory usage is linear to
number of cores in system. It is to be expected that on current top of
the line servers percpu allocator memory usage will be 2-5x more than on
24 CPUs setup that was used for testing.
Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory
Patches applied on top of net-next branch:
commit 2203cbf2c8 (net-next) Author:
Russell King <rmk+kernel@armlinux.org.uk> Date: Tue Oct 15 11:38:39 2019
+0100
net: sfp: move fwnode parsing into sfp-bus layer
Changes V1 -> V2:
- Include memory measurements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests to verify action creation with new fast_init flag for all
actions that support the flag.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct tc_action with new "tcfa_flags" field. Set the field in
tcf_idr_create() function and provide new helper
tcf_idr_create_from_flags() that derives 'cpustats' boolean from flags
value. Update individual hardware-offloaded actions init() to pass their
"flags" argument to new helper in order to skip percpu stats allocation
when user requested it through flags.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang