The libbpf AF_XDP code is extended to allow for the creation of Rx
only or Tx only sockets. Previously it returned an error if the socket
was not initialized for both Rx and Tx.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-4-git-send-email-magnus.karlsson@intel.com
Add support for the XDP_SHARED_UMEM mode to the xdpsock sample
application. As libbpf does not have a built in XDP program for this
mode, we use an explicitly loaded XDP program. This also serves as an
example on how to write your own XDP program that can route to an
AF_XDP socket.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-3-git-send-email-magnus.karlsson@intel.com
Add support in libbpf to create multiple sockets that share a single
umem. Note that an external XDP program need to be supplied that
routes the incoming traffic to the desired sockets. So you need to
supply the libbpf_flag XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD and load
your own XDP program.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-2-git-send-email-magnus.karlsson@intel.com
Toke Høiland-Jørgensen says:
====================
This series fixes a few bugs in libbpf that I discovered while playing around
with the new auto-pinning code, and writing the first utility in xdp-tools[0]:
- If object loading fails, libbpf does not clean up the pinnings created by the
auto-pinning mechanism.
- EPERM is not propagated to the caller on program load
- Netlink functions write error messages directly to stderr
In addition, libbpf currently only has a somewhat limited getter function for
XDP link info, which makes it impossible to discover whether an attached program
is in SKB mode or not. So the last patch in the series adds a new getter for XDP
link info which returns all the information returned via netlink (and which can
be extended later).
Finally, add a getter for BPF program size, which can be used by the caller to
estimate the amount of locked memory needed to load a program.
A selftest is added for the pinning change, while the other features were tested
in the xdp-filter tool from the xdp-tools repo. The 'new-libbpf-features' branch
contains the commits that make use of the new XDP getter and the corrected EPERM
error code.
[0] https://github.com/xdp-project/xdp-tools
Changelog:
v4:
- Don't do any size checks on struct xdp_info, just copy (and/or zero)
whatever size the caller supplied.
v3:
- Pass through all kernel error codes on program load (instead of just EPERM).
- No new bpf_object__unload() variant, just do the loop at the caller
- Don't reject struct xdp_info sizes that are bigger than what we expect.
- Add a comment noting that bpf_program__size() returns the size in bytes
v2:
- Keep function names in libbpf.map sorted properly
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds a new getter for the BPF program size (in bytes). This is useful
for a caller that is trying to predict how much memory will be locked by
loading a BPF object into the kernel.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185272.88376.10996937115395724683.stgit@toke.dk
Currently, libbpf only provides a function to get a single ID for the XDP
program attached to the interface. However, it can be useful to get the
full set of program IDs attached, along with the attachment mode, in one
go. Add a new getter function to support this, using an extendible
structure to carry the information. Express the old bpf_get_link_id()
function in terms of the new function.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157333185164.88376.7520653040667637246.stgit@toke.dk
The netlink functions were using fprintf(stderr, ) directly to print out
error messages, instead of going through the usual logging macros. This
makes it impossible for the calling application to silence or redirect
those error messages. Fix this by switching to pr_warn() in nlattr.c and
netlink.c.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185055.88376.15999360127117901443.stgit@toke.dk
When loading an eBPF program, libbpf overrides the return code for EPERM
errors instead of returning it to the caller. This makes it hard to figure
out what went wrong on load.
In particular, EPERM is returned when the system rlimit is too low to lock
the memory required for the BPF program. Previously, this was somewhat
obscured because the rlimit error would be hit on map creation (which does
return it correctly). However, since maps can now be reused, object load
can proceed all the way to loading programs without hitting the error;
propagating it even in this case makes it possible for the caller to react
appropriately (and, e.g., attempt to raise the rlimit before retrying).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184946.88376.11768171652794234561.stgit@toke.dk
This add tests for the different variations of automatic map unpinning on
load failure.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184838.88376.8243704248624814775.stgit@toke.dk
Since the automatic map-pinning happens during load, it will leave pinned
maps around if the load fails at a later stage. Fix this by unpinning any
pinned maps on cleanup. To avoid unpinning pinned maps that were reused
rather than newly pinned, add a new boolean property on struct bpf_map to
keep track of whether that map was reused or not; and only unpin those maps
that were not reused.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184731.88376.9992935027056165873.stgit@toke.dk
Since, the new syntax of BTF-defined map has been introduced,
the syntax for using maps under samples directory are mixed up.
For example, some are already using the new syntax, and some are using
existing syntax by calling them as 'legacy'.
As stated at commit abd29c9314 ("libbpf: allow specifying map
definitions using BTF"), the BTF-defined map has more compatablility
with extending supported map definition features.
The commit doesn't replace all of the map to new BTF-defined map,
because some of the samples still use bpf_load instead of libbpf, which
can't properly create BTF-defined map.
This will only updates the samples which uses libbpf API for loading bpf
program. (ex. bpf_prog_load_xattr)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, under samples, several methods are being used to load bpf
program.
Since using libbpf is preferred solution, lots of previously used
'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr'
from libbpf.
But some of the error messages still show up as 'load_bpf_file' instead
of 'bpf_prog_load_xattr'.
This commit fixes outdated errror messages under samples and fixes some
code style issues.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com
This patch adds array support to btf_struct_access().
It supports array of int, array of struct and multidimensional
array.
It also allows using u8[] as a scratch space. For example,
it allows access the "char cb[48]" with size larger than
the array's element "char". Another potential use case is
"u64 icsk_ca_priv[]" in the tcp congestion control.
btf_resolve_size() is added to resolve the size of any type.
It will follow the modifier if there is any. Please
see the function comment for details.
This patch also adds the "off < moff" check at the beginning
of the for loop. It is to reject cases when "off" is pointing
to a "hole" in a struct.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180903.4097702-1-kafai@fb.com
Andrii Nakryiko says:
====================
Github's mirror of libbpf got LGTM and Coverity statis analysis running
against it and spotted few real bugs and few potential issues. This patch
series fixes found issues.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If we get ELF file with "maps" section, but no symbols pointing to it, we'll
end up with division by zero. Add check against this situation and exit early
with error. Found by Coverity scan against Github libbpf sources.
Fixes: bf82927125 ("libbpf: refactor map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-6-andriin@fb.com
Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.
Fixes: 69eaab04c6 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com
Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.
Fixes: 3d65014146 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com
Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.
Fixes: 2993e0515b ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com
Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.
Fixes: 10a13bb40e ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com
We don't need them since commit e1cf4befa2 ("bpf, s390x: remove
ld_abs/ld_ind") and commit a3212b8f15 ("bpf, s390x: remove obsolete
exception handling from div/mod").
Also, use BIT(n) instead of 1 << n, because checkpatch says so.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107114033.90505-1-iii@linux.ibm.com
This change does not alter JIT behavior; it only makes it possible to
safely invoke JIT macros with complex arguments in the future.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107113211.90105-1-iii@linux.ibm.com
A BPF program may consist of 1m instructions, which means JIT
instruction-address mapping can be as large as 4m. s390 has
FORCE_MAX_ZONEORDER=9 (for memory hotplug reasons), which means maximum
kmalloc size is 1m. This makes it impossible to JIT programs with more
than 256k instructions.
Fix by using kvcalloc, which falls back to vmalloc for larger
allocations. An alternative would be to use a radix tree, but that is
not supported by bpf_prog_fill_jited_linfo.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107141838.92202-1-iii@linux.ibm.com
When compiling larger programs with bpf_asm, it's possible to
accidentally exceed jt/jf range, in which case it won't complain, but
rather silently emit a truncated offset, leading to a "happy debugging"
situation.
Add a warning to help detecting such issues. It could be made an error
instead, but this might break compilation of existing code (which might
be working by accident).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107100349.88976-1-iii@linux.ibm.com
In the bpf interpreter mode, bpf_probe_read_kernel is used to read
from PTR_TO_BTF_ID's kernel object. It currently missed considering
the insn->off. This patch fixes it.
Fixes: 2a02759ef5 ("bpf: Add support for BTF pointers to interpreter")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107014640.384083-1-kafai@fb.com
Streamline BPF_CORE_READ_BITFIELD_PROBED interface to follow
BPF_CORE_READ_BITFIELD (direct) and BPF_CORE_READ, in general, i.e., just
return read result or 0, if underlying bpf_probe_read() failed.
In practice, real applications rarely check bpf_probe_read() result, because
it has to always work or otherwise it's a bug. So propagating internal
bpf_probe_read() error from this macro hurts usability without providing real
benefits in practice. This patch fixes the issue and simplifies usage,
noticeable even in selftest itself.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191106201500.2582438-1-andriin@fb.com
As part of 42765ede5c ("selftests/bpf: Remove too strict field offset relo
test cases"), few ints relocations negative (supposed to fail) tests were
removed, but not completely. Due to them being negative, some leftovers in
prog_tests/core_reloc.c went unnoticed. Clean them up.
Fixes: 42765ede5c ("selftests/bpf: Remove too strict field offset relo test cases")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191106173659.1978131-1-andriin@fb.com
Andrii Nakryiko says:
====================
This patch set adds support for reading bitfields in a relocatable manner
through a set of relocations emitted by Clang, corresponding libbpf support
for those relocations, as well as abstracting details into
BPF_CORE_READ_BITFIELD/BPF_CORE_READ_BITFIELD_PROBED macro.
We also add support for capturing relocatable field size, so that BPF program
code can adjust its logic to actual amount of data it needs to operate on,
even if it changes between kernels. New convenience macro is added to
bpf_core_read.h (bpf_core_field_size(), in the same family of macro as
bpf_core_read() and bpf_core_field_exists()). Corresponding set of selftests
are added to excercise this logic and validate correctness in a variety of
scenarios.
Some of the overly strict logic of matching fields is relaxed to support wider
variety of scenarios. See patch #1 for that.
Patch #1 removes few overly strict test cases.
Patch #2 adds support for bitfield-related relocations.
Patch #3 adds some further adjustments to support generic field size
relocations and introduces bpf_core_field_size() macro.
Patch #4 tests bitfield reading.
Patch #5 tests field size relocations.
v1 -> v2:
- added direct memory read-based macro and tests for bitfield reads.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a bunch of selftests verifying correctness of relocatable bitfield reading
support in libbpf. Both bpf_probe_read()-based and direct read-based bitfield
macros are tested. core_reloc.c "test_harness" is extended to support raw
tracepoint and new typed raw tracepoints as test BPF program types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-5-andriin@fb.com
Add bpf_core_field_size() macro, capturing a relocation against field size.
Adjust bits of internal libbpf relocation logic to allow capturing size
relocations of various field types: arrays, structs/unions, enums, etc.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-4-andriin@fb.com
Add support for the new field relocation kinds, necessary to support
relocatable bitfield reads. Provide macro for abstracting necessary code doing
full relocatable bitfield extraction into u64 value. Two separate macros are
provided:
- BPF_CORE_READ_BITFIELD macro for direct memory read-enabled BPF programs
(e.g., typed raw tracepoints). It uses direct memory dereference to extract
bitfield backing integer value.
- BPF_CORE_READ_BITFIELD_PROBED macro for cases where bpf_probe_read() needs
to be used to extract same backing integer value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-3-andriin@fb.com
As libbpf is going to gain support for more field relocations, including field
size, some restrictions about exact size match are going to be lifted. Remove
test cases that explicitly test such failures.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191101222810.1246166-2-andriin@fb.com
drivers/isdn/hardware/mISDN/mISDNisar.c:30:17:
warning: faxmodulation_s defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IDT ClockMatrix (TM) family includes integrated devices that provide
eight PLL channels. Each PLL channel can be independently configured as a
frequency synthesizer, jitter attenuator, digitally controlled
oscillator (DCO), or a digital phase lock loop (DPLL). Typically
these devices are used as timing references and clock sources for PTP
applications. This patch adds support for the device.
Co-developed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add device tree binding doc for the IDT ClockMatrix PTP clock.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
traceroute6 output can be confusing, in that it shows the address
that a router would use to reach the sender, rather than the address
the packet used to reach the router.
Consider this case:
------------------------ N2
| |
------ ------ N3 ----
| R1 | | R2 |------|H2|
------ ------ ----
| |
------------------------ N1
|
----
|H1|
----
where H1's default route is through R1, and R1's default route is
through R2 over N2.
traceroute6 from H1 to H2 shows R2's address on N1 rather than on N2.
The script below can be used to reproduce this scenario.
traceroute6 output without this patch:
traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
1 2000:101::1 (2000:101::1) 0.036 ms 0.008 ms 0.006 ms
2 2000:101::2 (2000:101::2) 0.011 ms 0.008 ms 0.007 ms
3 2000:103::4 (2000:103::4) 0.013 ms 0.010 ms 0.009 ms
traceroute6 output with this patch:
traceroute to 2000:103::4 (2000:103::4), 30 hops max, 80 byte packets
1 2000:101::1 (2000:101::1) 0.056 ms 0.019 ms 0.006 ms
2 2000:102::2 (2000:102::2) 0.013 ms 0.008 ms 0.008 ms
3 2000:103::4 (2000:103::4) 0.013 ms 0.009 ms 0.009 ms
#!/bin/bash
#
# ------------------------ N2
# | |
# ------ ------ N3 ----
# | R1 | | R2 |------|H2|
# ------ ------ ----
# | |
# ------------------------ N1
# |
# ----
# |H1|
# ----
#
# N1: 2000:101::/64
# N2: 2000:102::/64
# N3: 2000:103::/64
#
# R1's host part of address: 1
# R2's host part of address: 2
# H1's host part of address: 3
# H2's host part of address: 4
#
# For example:
# the IPv6 address of R1's interface on N2 is 2000:102::1/64
#
# Nets are implemented by macvlan interfaces (bridge mode) over
# dummy interfaces.
#
# Create net namespaces
ip netns add host1
ip netns add host2
ip netns add rtr1
ip netns add rtr2
# Create nets
ip link add net1 type dummy; ip link set net1 up
ip link add net2 type dummy; ip link set net2 up
ip link add net3 type dummy; ip link set net3 up
# Add interfaces to net1, move them to their nemaspaces
ip link add link net1 dev host1net1 type macvlan mode bridge
ip link set host1net1 netns host1
ip link add link net1 dev rtr1net1 type macvlan mode bridge
ip link set rtr1net1 netns rtr1
ip link add link net1 dev rtr2net1 type macvlan mode bridge
ip link set rtr2net1 netns rtr2
# Add interfaces to net2, move them to their nemaspaces
ip link add link net2 dev rtr1net2 type macvlan mode bridge
ip link set rtr1net2 netns rtr1
ip link add link net2 dev rtr2net2 type macvlan mode bridge
ip link set rtr2net2 netns rtr2
# Add interfaces to net3, move them to their nemaspaces
ip link add link net3 dev rtr2net3 type macvlan mode bridge
ip link set rtr2net3 netns rtr2
ip link add link net3 dev host2net3 type macvlan mode bridge
ip link set host2net3 netns host2
# Configure interfaces and routes in host1
ip netns exec host1 ip link set lo up
ip netns exec host1 ip link set host1net1 up
ip netns exec host1 ip -6 addr add 2000:101::3/64 dev host1net1
ip netns exec host1 ip -6 route add default via 2000:101::1
# Configure interfaces and routes in rtr1
ip netns exec rtr1 ip link set lo up
ip netns exec rtr1 ip link set rtr1net1 up
ip netns exec rtr1 ip -6 addr add 2000:101::1/64 dev rtr1net1
ip netns exec rtr1 ip link set rtr1net2 up
ip netns exec rtr1 ip -6 addr add 2000:102::1/64 dev rtr1net2
ip netns exec rtr1 ip -6 route add default via 2000:102::2
ip netns exec rtr1 sysctl net.ipv6.conf.all.forwarding=1
# Configure interfaces and routes in rtr2
ip netns exec rtr2 ip link set lo up
ip netns exec rtr2 ip link set rtr2net1 up
ip netns exec rtr2 ip -6 addr add 2000:101::2/64 dev rtr2net1
ip netns exec rtr2 ip link set rtr2net2 up
ip netns exec rtr2 ip -6 addr add 2000:102::2/64 dev rtr2net2
ip netns exec rtr2 ip link set rtr2net3 up
ip netns exec rtr2 ip -6 addr add 2000:103::2/64 dev rtr2net3
ip netns exec rtr2 sysctl net.ipv6.conf.all.forwarding=1
# Configure interfaces and routes in host2
ip netns exec host2 ip link set lo up
ip netns exec host2 ip link set host2net3 up
ip netns exec host2 ip -6 addr add 2000:103::4/64 dev host2net3
ip netns exec host2 ip -6 route add default via 2000:103::2
# Ping host2 from host1
ip netns exec host1 ping6 -c5 2000:103::4
# Traceroute host2 from host1
ip netns exec host1 traceroute6 2000:103::4
# Delete nets
ip link del net3
ip link del net2
ip link del net1
# Delete namespaces
ip netns del rtr2
ip netns del rtr1
ip netns del host2
ip netns del host1
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Original-patch-by: Honggang Xu <hxu@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As mentioned in commit e95584a889 ("tipc: fix unlimited bundling of
small messages"), the current message bundling algorithm is inefficient
that can generate bundles of only one payload message, that causes
unnecessary overheads for both the sender and receiver.
This commit re-designs the 'tipc_msg_make_bundle()' function (now named
as 'tipc_msg_try_bundle()'), so that when a message comes at the first
place, we will just check & keep a reference to it if the message is
suitable for bundling. The message buffer will be put into the link
backlog queue and processed as normal. Later on, when another one comes
we will make a bundle with the first message if possible and so on...
This way, a bundle if really needed will always consist of at least two
payload messages. Otherwise, we let the first buffer go its way without
any need of bundling, so reduce the overheads to zero.
Moreover, since now we have both the messages in hand, we can even
optimize the 'tipc_msg_bundle()' function, make bundle of a very large
(size ~ MSS) and small messages which is not with the current algorithm
e.g. [1400-byte message] + [10-byte message] (MTU = 1500).
Acked-by: Ying Xue <ying.xue@windreiver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even with icmp_errors_use_inbound_ifaddr set, traceroute returns the
primary address of the interface the packet was received on, even if
the path goes through a secondary address. In the example:
1.0.3.1/24
---- 1.0.1.3/24 1.0.1.1/24 ---- 1.0.2.1/24 1.0.2.4/24 ----
|H1|--------------------------|R1|--------------------------|H2|
---- N1 ---- N2 ----
where 1.0.3.1/24 is R1's primary address on N1, traceroute from
H1 to H2 returns:
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.3.1 (1.0.3.1) 0.018 ms 0.006 ms 0.006 ms
2 1.0.2.4 (1.0.2.4) 0.021 ms 0.007 ms 0.007 ms
After applying this patch, it returns:
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.1.1 (1.0.1.1) 0.033 ms 0.007 ms 0.006 ms
2 1.0.2.4 (1.0.2.4) 0.011 ms 0.007 ms 0.007 ms
Original-patch-by: Bill Fenner <fenner@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tonghao Zhang says:
====================
optimize openvswitch flow looking up
This series patch optimize openvswitch for performance or simplify
codes.
Patch 1, 2, 4: Port Pravin B Shelar patches to
linux upstream with little changes.
Patch 5, 6, 7: Optimize the flow looking up and
simplify the flow hash.
Patch 8, 9: are bugfix.
The performance test is on Intel Xeon E5-2630 v4.
The test topology is show as below:
+-----------------------------------+
| +---------------------------+ |
| | eth0 ovs-switch eth1 | | Host0
| +---------------------------+ |
+-----------------------------------+
^ |
| |
| |
| |
| v
+-----+----+ +----+-----+
| netperf | Host1 | netserver| Host2
+----------+ +----------+
We use netperf send the 64B packets, and insert 255+ flow-mask:
$ ovs-dpctl add-flow ovs-switch "in_port(1),eth(dst=00:01:00:00:00:00/ff:ff:ff:ff:ff:01),eth_type(0x0800),ipv4(frag=no)" 2
...
$ ovs-dpctl add-flow ovs-switch "in_port(1),eth(dst=00:ff:00:00:00:00/ff:ff:ff:ff:ff:ff),eth_type(0x0800),ipv4(frag=no)" 2
$
$ netperf -t UDP_STREAM -H 2.2.2.200 -l 40 -- -m 18
* Without series patch, throughput 8.28Mbps
* With series patch, throughput 46.05Mbps
v6:
some coding style fixes
v5:
rewrite patch 8, release flow-mask when freeing flow
v4:
access ma->count with READ_ONCE/WRITE_ONCE API. More information,
see patch 5 comments.
v3:
update ma point when realloc mask_array in patch 5
v2:
simplify codes. e.g. use kfree_rcu instead of call_rcu
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
use the specified functions to init resource.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlocking of a not locked mutex is not allowed.
Other kernel thread may be in critical section while
we unlock it because of setting user_feature fail.
Fixes: 95a7233c4 ("net: openvswitch: Set OvS recirc_id from tc chain index")
Cc: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we destroy the flow tables which may contain the flow_mask,
so release the flow mask struct.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The most case *index < ma->max, and flow-mask is not NULL.
We add un/likely for performance.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code and remove the unnecessary BUILD_BUG_ON.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The full looking up on flow table traverses all mask array.
If mask-array is too large, the number of invalid flow-mask
increase, performance will be drop.
One bad case, for example: M means flow-mask is valid and NULL
of flow-mask means deleted.
+-------------------------------------------+
| M | NULL | ... | NULL | M|
+-------------------------------------------+
In that case, without this patch, openvswitch will traverses all
mask array, because there will be one flow-mask in the tail. This
patch changes the way of flow-mask inserting and deleting, and the
mask array will be keep as below: there is not a NULL hole. In the
fast path, we can "break" "for" (not "continue") in flow_lookup
when we get a NULL flow-mask.
"break"
v
+-------------------------------------------+
| M | M | NULL |... | NULL | NULL|
+-------------------------------------------+
This patch don't optimize slow or control path, still using ma->max
to traverse. Slow path:
* tbl_mask_array_realloc
* ovs_flow_tbl_lookup_exact
* flow_mask_find
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port the codes to linux upstream and with little changes.
Pravin B Shelar, says:
| In case hash collision on mask cache, OVS does extra flow
| lookup. Following patch avoid it.
Link: 0e6efbe271
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creating and inserting flow-mask, if there is no available
flow-mask, we realloc the mask array. When removing flow-mask,
if necessary, we shrink mask array.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Karlsson