Support up to 128 arguments to fetch for each kprobes event.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203518.31965.96979.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add the documentation to use the kprobe based event tracer.
[fweisbec@gmail.com: Split tracer and its Documentation in two patchs]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add kprobes-based event tracer on ftrace.
This tracer is similar to the events tracer which is based on Tracepoint
infrastructure. Instead of Tracepoint, this tracer is based on kprobes
(kprobe and kretprobe). It probes anywhere where kprobes can probe(this
means, all functions body except for __kprobes functions).
Similar to the events tracer, this tracer doesn't need to be activated
via current_tracer, instead of that, just set probe points via
/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.
This tracer supports following probe arguments for each probe.
%REG : Fetch register REG
sN : Fetch Nth entry of stack (N >= 0)
sa : Fetch stack address.
@ADDR : Fetch memory at ADDR (ADDR should be in kernel)
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
aN : Fetch function argument. (N >= 0)
rv : Fetch return value.
ra : Fetch return address.
+|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.
See Documentation/trace/kprobetrace.txt in the next patch for details.
Changes from v13:
- Support 'sa' for stack address.
- Use call->data instead of container_of() macro.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Use TRACE_FIELD_ZERO(type, item) instead of TRACE_FIELD_ZERO_CHAR(item).
This also includes a typo fix of TRACE_ZERO_CHAR() macro.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203501.31965.30172.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add dynamic ftrace_event_call support to ftrace. Trace engines can add
new ftrace_event_call to ftrace on the fly. Each operator function of
the call takes an ftrace_event_call data structure as an argument,
because these functions may be shared among several ftrace_event_calls.
Changes from v13:
- Define remove_subsystem_dir() always (revirt a2ca5e03), because
trace_remove_event_call() uses it.
- Modify syscall tracer because of ftrace_event_call change.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add following APIs for accessing registers and stack entries from
pt_regs.
These APIs are required by kprobes-based event tracer on ftrace.
Some other debugging tools might be able to use it too.
- regs_query_register_offset(const char *name)
Query the offset of "name" register.
- regs_query_register_name(unsigned int offset)
Query the name of register by its offset.
- regs_get_register(struct pt_regs *regs, unsigned int offset)
Get the value of a register by its offset.
- regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
Check the address is in the kernel stack.
- regs_get_kernel_stack_nth(struct pt_regs *reg, unsigned int nth)
Get Nth entry of the kernel stack. (N >= 0)
- regs_get_argument_nth(struct pt_regs *reg, unsigned int nth)
Get Nth argument at function call. (N >= 0)
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: linux-arch@vger.kernel.org
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203444.31965.26374.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cleanup fix_riprel() in arch/x86/kernel/kprobes.c by using the new x86
instruction decoder instead of using comparisons with raw ad hoc numeric
opcodes.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203436.31965.34374.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Ensure safeness of inserting kprobes by checking whether the specified
address is at the first byte of an instruction on x86.
This is done by decoding probed function from its head to the probe
point.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203428.31965.21939.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add a user-space selftest of x86 instruction decoder at kernel build
time.
When CONFIG_X86_DECODER_SELFTEST=y, Kbuild builds a test harness of x86
instruction decoder and performs it after building vmlinux.
The test compares the results of objdump and x86 instruction decoder
code and check there are no differences.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203421.31965.29006.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add x86 instruction decoder to arch-specific libraries. This decoder
can decode x86 instructions used in kernel into prefix, opcode, modrm,
sib, displacement and immediates. This can also show the length of
instructions.
This version introduces instruction attributes for decoding
instructions.
The instruction attribute tables are generated from the opcode map file
(x86-opcode-map.txt) by the generator script(gen-insn-attr-x86.awk).
Currently, the opcode maps are based on opcode maps in Intel(R) 64 and
IA-32 Architectures Software Developers Manual Vol.2: Appendix.A,
and consist of below two types of opcode tables.
1-byte/2-bytes/3-bytes opcodes, which has 256 elements, are
written as below;
Table: table-name
Referrer: escaped-name
opcode: mnemonic|GrpXXX [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
(or)
opcode: escape # escaped-name
EndTable
Group opcodes, which has 8 elements, are written as below;
GrpTable: GrpXXX
reg: mnemonic [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
EndTable
These opcode maps include a few SSE and FP opcodes (for setup), because
those opcodes are used in the kernel.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203413.31965.49709.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The commit:
commit 5ac35daa93
Author: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
tracing/events: fix the include file dependencies
Moved the TRACE_EVENT out of the ifdef protection of tracepoints.h
but uses the define of TRACE_EVENT itself as protection. This patch
adds comments to explain why.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The TRACE_EVENT depends on the include/linux/tracepoint.h first
and include/trace/ftrace.h later, if we include the ftrace.h early,
a building error will occur.
Both define TRACE_EVENT in trace_a.h and trace_b.h, if we include
those in .c file, like this:
#define CREATE_TRACE_POINTS
include <trace/events/trace_a.h>
include <trace/events/trace_b.h>
The above will not work, because the TRACE_EVENT was re-defined by
the previous .h file.
Reported-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A937F5E.3020802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are many clock sources for the tracing system but we can only
enable/disable one at a time with the trace/options file.
We can move the setting of clock-source out of options and add a separate
file for it:
# cat trace_clock
[local] global
# echo global > trace_clock
# cat trace_clock
local [global]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <4A939D08.6050604@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Usually, char * entries are dangerous in traces because the string
can be released whereas a pointer to it can still wait to be read from
the ring buffer.
But sometimes we can assume it's safe, like in case of RO data
(eg: __file__ or __line__, used in bkl trace event). If these RO data
are in a module and so is the call to the trace event, then it's safe,
because the ring buffer will be flushed once this module get unloaded.
To allow char * to be treated as a string:
TRACE_EVENT(...,
TP_STRUCT__entry(
__field_ext(const char *, name, FILTER_PTR_STRING)
...
)
...
);
The filtering will not dereference "char *" unless the developer
explicitly sets FILTER_PTR_STR in __field_ext.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9287.90205@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add __field_ext(), so a field can be assigned to a specific
filter_type, which matches a corresponding filter function.
For example, a later patch will allow this:
__field_ext(const char *, str, FILTER_PTR_STR);
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9272.6050709@cn.fujitsu.com>
[
Fixed a -1 to FILTER_OTHER
Forward ported to latest kernel.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The type of a field is stored as a string in @type, and here
we add @filter_type which is an enum value.
This prepares for later patches, so we can specifically assign
different @filter_type for the same @type.
For example normally a "char *" field is treated as a ptr,
but we may want it to be treated as a string when doing filting.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B925E.9030605@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
function_graph traces look like nested function calls, complete with
braces denoting the start and end of functions. function-graph-fold.vim
teaches vim how to fold these functions, to make it more convenient to
browse them.
To use, :source function-graph-fold.vim while viewing a function_graph
trace, or use "view -S function-graph-fold.vim some-trace" to load it
from the command-line together with a trace. You can then use the usual
vim fold commands, such as "za", to open and close nested functions.
While closed, a fold will show the total time taken for a call, as would
normally appear on the line with the closing brace. Folded functions
will not include finish_task_switch(), so folding should remain
relatively sane even through a context switch.
Note that this will almost certainly only work well with a single-CPU
trace (e.g. trace-cmd report --cpu 1). It also takes some time to run
(a few seconds for a large trace on my laptop). Nevertheless, I found
it very handy to get an overview of a trace and then drill down on
problematic calls.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
LKML-Reference: <20090806145701.GB7661@feather>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging the scheduler push / pull algorithm, I found
it very annoying that the sched wake up events did not show
the CPU that the task was waking on. In order to analyze the
scheduler, I needed that information.
This patch adds recording of the CPU that a task is waking up
on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so
you can have generic ftrace events that capture all system calls with
arguments and return values. These generic events are also renamed to
sys_enter/exit, so they're more closely aligned to the specific
sys_enter_foo events.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
It's not strictly correct for the tracepoint reg/unreg callbacks to
occur when a client is hooking up, because the actual tracepoint may not
be present yet. This happens to be fine for syscall, since that's in
the core kernel, but it would cause problems for tracepoints defined in
a module that hasn't been loaded yet. It also means the reg/unreg has
to be EXPORTed for any modules to use the tracepoint (as in SystemTap).
This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces
DEFINE_TRACE_FN which stores the callbacks in struct tracepoint. The
callbacks are used now when the active state of the tracepoint changes
in set_tracepoint & disable_tracepoint.
This also introduces TRACE_EVENT_FN, so ftrace events can also provide
registration callbacks if needed.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The syscall enter/exit tracepoints are only supported on archs that
HAVE_SYSCALL_TRACEPOINTS, so the declarations should be #ifdef'ed.
Also, the definition of syscall_regfunc and syscall_unregfunc should
depend on this same config, rather than the ftrace-specific one.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1251150194-1713-3-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g
s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g
The syscall enter/exit tracing is no longer specific to just ftrace, so
they now have names that reflect their tie to tracepoints instead.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Extract duplicate code. Also prepare for the later patch.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAFB8.1010304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This parameter is needed by syscall events to add define_fields()
handler.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF90.6060801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The "format" file of a trace event is originally for parsers to
parse ftrace binary output.
But the "format" file of a syscall event can only be used by
perfcounter, because it describes the format of struct
syscall_enter_record not struct syscall_trace_enter.
To fix this, we remove struct syscall_enter_record, and then
struct syscall_trace_enter will be used by both perf profile
and ftrace.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF39.1030404@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit fb34a08c3 ("tracing: Add trace events for each syscall
entry/exit") changed the lowlevel API to ftrace syscall tracing
but did not update s390 which started making use of it recently.
This broke the s390 build, as reported by Paul Mundt.
Update the callbacks with the syscall number and the syscall
return code values. This allows per syscall tracepoints,
syscall argument enumeration /debug/tracing/events/syscalls/
and perfcounters support and integration on s390 too.
Reported-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <tip-fb34a08c3469b2be9eae626ccb96476b4687b810@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
One entry is missing in the output of a stat file.
The cause is, when stat_seq_start() is called the 2nd time, we
should start from the (pos-1)th elem in the rbtree but not pos,
because pos == 0 is the header.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A891A65.70009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When syscall tracing was implemented as a tracer,
"syscall_arg_type" trace option could be set to enable the
display of syscall parameter types.
Now this option is gone since it's no longer a tracer, but the
code is still there but dead.
So we remove dead code and re-enable the printing of paramete
types via the verbose option:
# echo verbose > trace_options
# echo syscalls > set_event
# cat trace
...
bash-3331 [000] 95.348937: sys_fcntl64 -> 0x1
bash-3331 [000] 95.348942: sys_close(unsigned int fd: a)
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <4A891AF6.5050102@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new syscall_regfunc()/unregfunc() functions rely on
the existence of TIF_SYSCALL_FTRACE - but that TIF flag
is only offered by HAVE_FTRACE_SYSCALLS.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define the format of the syscall trace fields to parse the binary
values from a raw trace using the syscall events "format" file.
This is defined dynamically using the syscalls metadata.
It prepares the export of syscall event raw records to perf
counters.
Example:
$ cat /debug/tracing/events/syscalls/sys_enter_sched_getparam/format
name: sys_enter_sched_getparam
ID: 39
format:
field:unsigned short common_type; offset:0; size:2;
field:unsigned char common_flags; offset:2; size:1;
field:unsigned char common_preempt_count; offset:3; size:1;
field:int common_pid; offset:4; size:4;
field:int common_tgid; offset:8; size:4;
field:pid_t pid; offset:12; size:8;
field:struct sched_param * param; offset:20; size:8;
print fmt: "pid: 0x%08lx, param: 0x%08lx", ((unsigned long)(REC->pid)), ((unsigned long)(REC->param))
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Add the struct ftrace_event_call as a parameter of its show_format()
callback. This way we can use it from the syscall trace events to
retrieve the syscall name from the ftrace event call parameter and
describe its fields using the syscalls metadata.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
A number of syscalls are not using 'DEFINE_SYSCALL'. I'm not sure why.
Convert x86_64 uname and mmap to use DEFINE_SYSCALL.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The new syscall tracepoints names can be too long for the 'perf list'
output.
Add a few more characters.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The perf counter support is automated for usual trace events. But we
have to define specific callbacks for this to handle syscalls trace
events
Make 'perf stat -e syscalls:sys_enter_blah' work with syscall style
tracepoints.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The current state of syscalls tracepoints generates only one event id
for every syscall events.
This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Layer Frederic's syscall tracer on tracepoints. We create trace events
via hooking into the SYSCALL_DEFINE macros. This allows us to
individually toggle syscall entry and exit points on/off.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
add an optional void * pointer to 'ftrace_event_call' that is
passed in for regfunc and unregfunc.
This prepares for syscall tracepoints creation by passing the name of
the syscall we want to trace and then retrieve its number through our
arch syscall table.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Allow the return value of raw_init() trace event callback to bail us out
of creating a trace event file, in case we fail to register our
event.
Also, we plan to return -ENOSYS for syscall events that don't match any
syscalls listed in our arch tracing syscall table, we don't want to warn
in that case, we just want this event to be invisible in debugfs and
ignored.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
update FTRACE_SYSCALL_MAX to the current number of syscalls
FTRACE_SYSCALL_MAX is a temporary solution to get the number of
syscalls supported by the arch until we find a more dynamic way
to get this number.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Introduce a new 'DECLARE_TRACE_WITH_CALLBACK()' macro, so that
tracepoints can associate an external register/unregister function.
This prepares for the syscalls tracer conversion to trace events. We
will need to perform arch level operations once a syscall event is
turned on/off, such as TIF flags setting, hence the need of such
specific callbacks.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Masami Hiramatsu