Just everything needed to decode videos using UVD.
v6: just all the bugfixes and support for R7xx-SI merged in one patch
v7: UVD_CGC_GATE is a write only register, lockup detection fix
v8: split out VRAM fallback changes, remove support for RV770,
add support for HEMLOCK, add buffer sizes checks
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch allows the CPU to map the stolen vram segment
directly rather than going through the PCI BAR. This
significantly improves performance for certain workloads with
a properly patched ddx.
Use radeon.fastfb=1 to enable it (disabled by default).
Currently only supported on RS690, but support for RS780/880
and newer APUs may be added eventually.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that the omapdss interface has been reworked so that omapdrm can use
dispc directly, we have been able to fix the remaining functional kms
issues with omapdrm. And in the mean time the PM sequencing and many
other of that open issues have been solved. So I think it makes sense
to finally move omapdrm out of staging.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 623000.0/sec.
i3-330m: 748000.0/sec to 789000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Userspace is able to hint to the kernel that its command stream and
auxiliary state buffers already hold the correct presumed addresses and
so the relocation process may be skipped if the kernel does not need to
move any buffers in preparation for the execbuffer. Thus for the common
case where the allotment of buffers is static between batches, we can
avoid the overhead of individually checking the relocation entries.
Note that this requires userspace to supply the domain tracking and
requests for workarounds itself that would otherwise be computed based
upon the relocation entries.
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 632000.0/sec.
i3-330m: 748000.0/sec to 830000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Fixup merge conflict in userspace header due to different
baseline trees.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch considers both case of vflip and hflip.
If we want that the contents in buffer to be rotated to 180 degree,
then we can use h,vflip or 180 degree.
Changelog v2:
- added EXYNOS_DRM_FLIP_BOTH enum value to avoid build warnning.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch changes file license to GPL
Most of exynos files had been copied from some random
file and not updated correctly. So this patch corrects
the file license.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Some fixes for 3.8:
- Watermark fixups from Chris Wilson (4 pieces).
- 2 snb workarounds, seem to be recently added to our internal DB.
- workaround for the infamous i830/i845 hang, seems now finally solid!
Based on Chris' fix for SNA, now also for UXA/mesa&old SNA.
- Some more fixlets for shrinker-pulls-the-rug issues (Chris&me).
- Fix dma-buf flags when exporting (you).
- Disable the VGA plane if it's enabled on lid open - similar fix in
spirit to the one I've sent you last weeek, BIOS' really like to mess
with the display when closing the lid (awesome debug work from Krzysztof
Mazur).
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: disable shrinker lock stealing for create_mmap_offset
drm/i915: optionally disable shrinker lock stealing
drm/i915: fix flags in dma buf exporting
i915: ensure that VGA plane is disabled
drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager
drm: Export routines for inserting preallocated nodes into the mm manager
drm/i915: don't disable disconnected outputs
drm/i915: Implement workaround for broken CS tlb on i830/845
drm/i915: Implement WaSetupGtModeTdRowDispatch
drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled
drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations
drm/i915: Clear self-refresh watermarks when disabled
drm/i915: Double the cursor self-refresh latency on Valleyview
drm/i915: Fixup cursor latency used for IVB lp3 watermarks
Now that Chris Wilson demonstrated that the key for stability on early
gen 2 is to simple _never_ exchange the physical backing storage of
batch buffers I've tried a stab at a kernel solution. Doesn't look too
nefarious imho, now that I don't try to be too clever for my own good
any more.
v2: After discussing the various techniques, we've decided to always blit
batches on the suspect devices, but allow userspace to opt out of the
kernel workaround assume full responsibility for providing coherent
batches. The principal reason is that avoiding the blit does improve
performance in a few key microbenchmarks and also in cairo-trace
replays.
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet:
- Drop the hunk which uses HAS_BROKEN_CS_TLB to implement the ring
wrap w/a. Suggested by Chris Wilson.
- Also add the ACTHD check from Chris Wilson for the error state
dumping, so that we still catch batches when userspace opts out of
the w/a.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Inki writes:
"- add dmabuf attach/detach feature
. This patch would resolve performance deterioration issue
when v4l2-based driver is using the buffer imported from gem.
- drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
. With gem allocation, kernel space mapping isn't allocated and
also physical pages aren't mapped with the kernel space.
The physical pages are mapped with kernel space though vmap
function only for console framebuffer.
- add the below two patches I missed.
drm: exynos: moved exynos drm device registration to drm driver
drm: exynos: moved exynos drm hdmi device registration to drm driver
- add IPP subsystem framework and its-based device drivers.
. This patch set includes fimc, rotator and gsc drivers to perform
image scaling, rotation and color space conversion.
- add runtime pm support to hdmi driver.
- And fixups and cleanups."
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (30 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
drm/exynos: hdmi: Fix potential NULL pointer dereference error
drm/exynos: hdmi: Add CONFIG_OF and use of_match_ptr() macro
drm/exynos: add support for hdmiphy power control for exynos5
drm/exynos: add runtime pm support for mixer
drm/exynos: added runtime pm support for hdmi
drm/exynos: fix allocation and cache mapping type
drm/exynos: reorder framebuffer init sequence
drm/exynos/iommu: fix return value check in drm_create_iommu_mapping()
drm/exynos: remove unused vaddr member
drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
drm/exynos: add exception codes to exynos_drm_fbdev_create()
...
This patch adds Image Post Processing(IPP) support for exynos drm driver.
IPP supports image scaler/rotator and input/output DMA operations
using IPP subsystem framework to control FIMC, Rotator and GSC hardware
and supports some user interfaces for user side.
And each IPP-based drivers support Memory to Memory operations
with various converting. And in case of FIMC hardware, it also supports
Writeback and Display output operations through local path.
Features:
- Memory to Memory operation support.
- Various pixel formats support.
- Image scaling support.
- Color Space Conversion support.
- Image crop operation support.
- Rotate operation support to 90, 180 or 270 degree.
- Flip operation support to vertical, horizontal or both.
- Writeback operation support to display blended image of FIMD fifo on screen
A summary to IPP Subsystem operations:
First of all, user should get property capabilities from IPP subsystem
and set these properties to hardware registers for desired operations.
The properties could be pixel format, position, rotation degree and
flip operation.
And next, user should set source and destination buffer data using
DRM_EXYNOS_IPP_QUEUE_BUF ioctl command with gem handles to source and
destinition buffers.
And next, user can control user-desired hardware with desired operations
such as play, stop, pause and resume controls.
And finally, user can aware of dma operation completion and also get
destination buffer that it contains user-desried result through dequeue
command.
IOCTL commands:
- DRM_EXYNOS_IPP_GET_PROPERTY
. get ipp driver capabilitis and id.
- DRM_EXYNOS_IPP_SET_PROPERTY
. set format, position, rotation, flip to source and destination buffers
- DRM_EXYNOS_IPP_QUEUE_BUF
. enqueue/dequeue buffer and make event list.
- DRM_EXYNOS_IPP_CMD_CTRL
. play/stop/pause/resume control.
Event:
- DRM_EXYNOS_IPP_EVENT
. a event to notify dma operation completion to user side.
Basic control flow:
Open -> Get properties -> User choose desired IPP sub driver(FIMC, Rotator
or GSCALER) -> Set Property -> Create gem handle -> Enqueue to source and
destination buffers -> Command control(Play) -> Event is notified to User
-> User gets destinition buffer complated -> (Enqueue to source and
destination buffers -> Event is notified to User) * N -> Queue/Dequeue to
source and destination buffers -> Command control(Stop) -> Free gem handle
-> Close
Changelog v1 ~ v5:
- added comments, code fixups and cleanups.
Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: Jinyoung Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This enables the functionality added in the previous
patches. Userspace acceleration drivers can use the
CS ioctl to submit command buffers to the async DMA
rings.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex writes:
Pretty minor -next pull request. We some additional new bits waiting
internally for release. Hopefully Monday we can get at least some of
them out. The others will probably take a few more weeks.
Highlights of the current request:
- ELD registers for passing audio information to the sound hardware
- Handle GPUVM page faults more gracefully
- Misc fixes
Merge radeon test
* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits)
drm/radeon: bump driver version for new info ioctl requests
drm/radeon: fix eDP clk and lane setup for scaled modes
drm/radeon: add new INFO ioctl requests
drm/radeon/dce32+: use fractional fb dividers for high clocks
drm/radeon: use cached memory when evicting for vram on non agp
drm/radeon: add a CS flag END_OF_FRAME
drm/radeon: stop page faults from hanging the system (v2)
drm/radeon/dce4/5: add registers for ELD handling
drm/radeon/dce3.2: add registers for ELD handling
radeon: fix pll/ctrc mapping on dce2 and dce3 hardware
Linux 3.7-rc7
powerpc/eeh: Do not invalidate PE properly
Revert "drm/i915: enable rc6 on ilk again"
ALSA: hda - Fix build without CONFIG_PM
of/address: sparc: Declare of_iomap as an extern function for sparc again
PM / QoS: fix wrong error-checking condition
bnx2x: remove redundant warning log
vxlan: fix command usage in its doc
8139cp: revert "set ring address before enabling receiver"
MPI: Fix compilation on MIPS with GCC 4.4 and newer
...
Conflicts:
drivers/gpu/drm/exynos/exynos_drm_encoder.c
drivers/gpu/drm/exynos/exynos_drm_fbdev.c
drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
Add requests to get the number of shader engines (SE) and
the number of SH per SE. These are needed for geometry
and tesselation shaders in the 3D driver as well as setting
up PA_SC_RASTER_CONFIG on SI asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No version bump is required because setting the flag on older DRM has
no effect.
This only reserves the bit and doesn't use it. I assume we will use it
for buffer eviction heuristics.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
This patch adds userptr feautre for G2D module.
The userptr means user space address allocated by malloc().
And the purpose of this feature is to make G2D's dma able
to access the user space region.
To user this feature, user should flag G2D_BUF_USRPTR to
offset variable of struct drm_exynos_g2d_cmd and fill
struct drm_exynos_g2d_userptr with user space address
and size for it and then should set a pointer to
drm_exynos_g2d_userptr object to data variable of struct
drm_exynos_g2d_cmd. The last bit of offset variable is used
to check if the cmdlist's buffer type is userptr or not.
If userptr, the g2d driver gets user space address and size
and then gets pages through get_user_pages().
(another case is counted as gem handle)
Below is sample codes:
static void set_cmd(struct drm_exynos_g2d_cmd *cmd,
unsigned long offset, unsigned long data)
{
cmd->offset = offset;
cmd->data = data;
}
static int solid_fill_test(int x, int y, unsigned long userptr)
{
struct drm_exynos_g2d_cmd cmd_gem[5];
struct drm_exynos_g2d_userptr g2d_userptr;
unsigned int gem_nr = 0;
...
g2d_userptr.userptr = userptr;
g2d_userptr.size = x * y * 4;
set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG |
G2D_BUF_USERPTR,
(unsigned long)&g2d_userptr);
...
}
int main(int argc, char **argv)
{
unsigned long addr;
...
addr = malloc(x * y * 4);
...
solid_fill_test(x, y, addr);
...
}
And next, the pages are mapped with iommu table and the device
address is set to cmdlist so that G2D's dma can access it.
As you may know, the pages from get_user_pages() are pinned.
In other words, they CAN NOT be migrated and also swapped out.
So the dma access would be safe.
But the use of userptr feature has performance overhead so
this patch also has memory pool to the userptr feature.
Please, assume that user sends cmdlist filled with userptr
and size every time to g2d driver, and the get_user_pages
funcion will be called every time.
The memory pool has maximum 64MB size and the userptr that
user had ever sent, is holded in the memory pool.
This meaning is that if the userptr from user is same as one
in the memory pool, device address to the userptr in the memory
pool is set to cmdlist.
And last, the pages from get_user_pages() will be freed once
user calls free() and the dma access is completed. Actually,
get_user_pages() takes 2 reference counts if the user process
has never accessed user region allocated by malloc(). Then, if
the user calls free(), the page reference count becomes 1 and
becomes 0 with put_page() call. And the reverse holds as well.
This means how the pages backed are used by dma and freed.
This patch is based on "drm/exynos: add iommu support for g2d",
https://patchwork.kernel.org/patch/1629481/
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Jumps in the vblank and page flip event timestamps cause trouble for
clients, so we should avoid them. The timestamp we get currently with
gettimeofday can jump, so use instead monotonic timestamps.
For backward compatibility use a module flag to revert back to using
gettimeofday timestamps. Add also a DRM_CAP_TIMESTAMP_MONOTONIC flag
that is simply a read only version of the module flag, so that clients
can query this without depending on sysfs.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQgvdwAAoJEHm+PkMAQRiG+3AH/i2XsqqN3VctL0nnbWfvds+Q
aKulfIdJTjKiVAsawPUtRqReZ8ijiebrgA/53lZLlrFOoPPQ5+LHmnSyQF6gErOY
NuAE1lijXDRM1pwBlhvOBbAj26wUobGjqONFJ9OkKr758Ue8ds/Q7UdxyEgmYgmg
tvVMzfRcICzryUV3PcqL+3cNPpCUdT6wGGRJ9DCv/jvGiWKExWhOle5oltrmxk+D
NsqRcws5pEubfHE4J8BvNWr8lE1kHfYVhrJETiLJUiN2XAJcbI4Jy7rU/3EGteNS
0HMZdaPPjV874lohdM70X2225SbYrCVkAYB5hnZCTeC3tYyCawBBPMQoyAiOcmU=
=+861
-----END PGP SIGNATURE-----
Merge tag 'v3.7-rc2' into drm-intel-next-queued
Linux 3.7-rc2
Backmerge to solve two ugly conflicts:
- uapi. We've already added new ioctl definitions for -next. Do I need to say more?
- wc support gtt ptes. We've had to revert this for snb+ for 3.7 and
also fix a few other things in the code. Now we know how to make it
work on snb+, but to avoid losing the other fixes do the backmerge
first before re-enabling wc gtt ptes on snb+.
And a few other minor things, among them git getting confused in
intel_dp.c and seemingly causing a conflict out of nothing ...
Conflicts:
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_modes.c
include/drm/i915_drm.h
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Set up empty UAPI Kbuild files to be populated by the header splitter.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Christian König