The current code doesn't report tuner lock properly if the
tuner get_status callback is not available, as reported by
smatch:
drivers/media/dvb-frontends/stv090x.c:2220 stv090x_get_coldlock() error: uninitialized symbol 'reg'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If, for some reason, reading the hwmodel register on
xc4000 fails, it will cause the following logig to
use a random value, as reported by smatch:
drivers/media/tuners/xc4000.c:1047 check_firmware() error: uninitialized symbol 'hwmodel'.
drivers/media/tuners/xc4000.c:1060 check_firmware() error: uninitialized symbol 'hwmodel'.
drivers/media/tuners/xc4000.c:1064 check_firmware() error: uninitialized symbol 'hwmodel'.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic at si476x_radio_s_hw_freq_seek() checks if the
frequency range that will be used to handle hardware seek
has the minimal frequency under rangelow. That works fine
if userspace zeros both fields. However, if userspace
fills either seek->rangelow or seek-rangehigh, it won't
read the corresponding range from the device, causing the
values to be unitialized, as warned by smatch:
drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangelow'.
drivers/media/radio/radio-si476x.c:789 si476x_radio_s_hw_freq_seek() error: uninitialized symbol 'rangehigh'.
Fix it by initializing those vars from the values present at
the struct v4l2_hw_freq_seek.
While here, simplify the logic which reads such values from
the hardware limits.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The logic at qt1010_init_meas1() and qt1010_init_meas2()
are too complex for static analizers to identify that
some vars are always be initialized.
That causes smatch to produce the following warnings:
drivers/media/tuners/qt1010.c:248 qt1010_init_meas1() error: uninitialized symbol 'val2'.
drivers/media/tuners/qt1010.c:282 qt1010_init_meas2() error: uninitialized symbol 'val'.
So, add annotations to prevent those bogus warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tuning logic at tda8290 relies on agc_stat and
adc_sat to be initialized. However, as warned by smatch:
drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'agc_stat'.
drivers/media/tuners/tda8290.c:261 tda8290_set_params() error: uninitialized symbol 'adc_sat'.
drivers/media/tuners/tda8290.c:262 tda8290_set_params() error: uninitialized symbol 'adc_sat'.
That could cause an erratic behavior if PLL is not locked,
as the code will only work if
!(pll_stat & 0x80) && (adc_sat < 20)
So, initialize it to zero, in order to let the code below
to be called, with should give more chances to adjust the
tuner gain, in order to get a PLL lock.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/platform/atmel/atmel-isc.c:2097 isc_parse_dt() error: uninitialized symbol 'ret'.
The problem here is that of_graph_get_next_endpoint() can
potentially return NULL on its first pass, with would make
it return a random value, as ret is not initialized.
While here, use while(1) instead of for(; ;), as while is
the preferred syntax for such kind of loops.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bitmask for the MIPI CSI-2 data PHY status doesn't seem to be correct.
Fix it.
Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the driver version number/string to 0.9.32-integrated.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add missing state->modcod update from upstream driver which needs to be
done when manage_matype_info() sets is_vcm on certain S2 transponders.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a ddb_ prefix to the two functions to better avoid conflicts in the
global namespace, ie. when building everything into the kernel image.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Rename the MaxS4/8 support files following upstream. References to these
files and descriptions have been updated aswell.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
slot_ts_enable_xo2() logged debug output to info instead of debug, so
fix this up.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move all CI device support related code from ddbridge-core to ddbridge-ci,
following the previously split off MaxS4/8 support.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixes several alignment, braces, space-before-cast, camelcase et al issues
reported by checkpatch --strict, plus a few more checkpatch didn't report.
Three checks are left after this though:
- one CamelCase in ddbridge-core, related to defines/vars/enums referenced
from the stv090x demod driver
- one macro argument reuse in ddbridge-core aswell
- one unbalanced braces around else in ddbridge-main, which is due to
#ifdefs related to CONFIG_PCI_MSI, which preferrably should be kept
as-is for readability.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These are only used in C/T demod attach functions, don't add any real
benefit (ie. line length savings) and in case of cxd28xx_attach aren't
even used consequently. Remove them.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tuning logic is broken with regards to status report:
it relies on a previously-cached value that may not be valid
if re-tuned.
Change the logic to always read the status.
Acked-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If set_fmt callback is called with format->width or format->height set to
zero and HACTIVE_CNT or VACTIVE_CNT bits (respectively) in chip are zero
we will divide by zero later in this callback when we try to calculate
HSC or VSC values.
Fix this by explicitly rejecting these values.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A 0b1100 value in 4 LSBs of "General Status 1" register (AFD_FMT_STAT) has
known meaning for CX2584x-series chips - it means that a SECAM signal is
currently detected by the chip.
Use this opportunity to also fix wrong binary values that were present
as comments attached to some entries in an array where
chip register -> V4L2 standard mappings are stored.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Setting a burst size of "8" doesn't work for IMX219 with 8-bit bayer,
but a burst size of "16" does. Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The complete handler walks all entities, expecting to find an imx
subdevice for each and every entity.
However, camera drivers such as smiapp can themselves contain multiple
entities, for which there will not be an imx subdevice. This causes
imx_media_find_subdev_by_sd() to fail, making the imx capture system
unusable with such cameras.
Work around this by killing the error entirely, thereby allowing
the imx capture to be used with such cameras.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When the tuner was split from m88rs2000 the attach function is in wrong
place.
Move to dm04_lme2510_tuner to trap errors on failure and removing
a call to lme_coldreset.
Prevents driver starting up without any tuner connected.
Fixes to trap for ts2020 fail.
LME2510(C): FE Found M88RS2000
ts2020: probe of 0-0060 failed with error -11
...
LME2510(C): TUN Found RS2000 tuner
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Warm start has no check as whether a genuine device has
connected and proceeds to next execution path.
Check device should read 0x47 at offset of 2 on USB descriptor read
and it is the amount requested of 6 bytes.
Fix for
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access as
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, add the proper SPDX,
better identifying the licenses whith apply to the source code.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to properly identify GPL v2
at the Siano's common driver. Some codes there are licensed
on GPL v2 or latter, while others are GPL v2 only. So,
in order to reflect the common license that applies to
everything, the module itself should be GPLv2 only.
While here, use the Kernel's coding style for the comments
with copyright info.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to properly identify GPL v2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, on the several
RC keymap files I wrote, add the proper SPDX, identifying
the license I meant.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to identify GPL v2, as this is the
minimal license requirement for those modles.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, on several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to properly identify GPL v2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to properly identify GPL v2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're now using SPDX identifiers, on the several
media drivers I wrote, add the proper SPDX, identifying
the license I meant.
As we're now using the short license, it doesn't make sense to
keep the original license text.
Also, fix MODULE_LICENSE to properly identify GPL v2.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
According to the UVC specification, stream error events carry no data.
Fix a buffer overflow (that should be harmless given data alignment)
when reporting the stream error event by removing the data byte from the
message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some cameras post inaccurate frame where next frame data overlap
it. this results in screen flicker, and it need to be prevented.
So this patch marks the buffer error to discard the frame where
buffer overflow.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Microsoft HoloLense UVC sensor uses D3DFMT instead of FOURCC when
exposing formats. This adds support for D3DFMT_L8 as exposed from
the Acer Windows Mixed Reality Headset.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix ptr_ret.cocci warnings:
drivers/media/platform/exynos4-is/fimc-lite.c:1465:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move ptype (property type) initialization out of switch case
and save few lines of code.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As of_node_full_name() now returns only the basename, the endpoint
information printed became useless:
adv748x 4-0070: Endpoint endpoint on port 7
adv748x 4-0070: Endpoint endpoint on port 8
adv748x 4-0070: Endpoint endpoint on port 10
adv748x 4-0070: Endpoint endpoint on port 11
Restore the old behavior by using "%pOF" instead:
adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@7/endpoint on port 7
adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@8/endpoint on port 8
adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@10/endpoint on port 10
adv748x 4-0070: Endpoint /soc/i2c@e66d8000/video-receiver@70/port@11/endpoint on port 11
Fixes: a7e4cfb0a7 ("of/fdt: only store the device node basename in full_name")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
timespec is generally deprecated because of the y2038 overflow.
In vivid, the usage is fine, since we are dealing with monotonic
timestamps, but we can also simplify the code by going to ktime_t.
Using ktime_divns() should be roughly as efficient as the old code,
since the constant 64-bit division gets turned into a multiplication
on modern platforms, and we save multiple 32-bit divisions that can be
expensive e.g. on ARMv7.
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The imx media driver passes around monotonic timestamps in the deprecated
'timespec' format. This is not a problem for the driver, as they won't
overflow, but moving to either timespec64 or ktime_t is preferred.
I'm picking ktime_t for simplicity here. frame_interval_monitor() is
the main function that changes, as it tries to compare a time interval
in microseconds. The algorithm slightly changes here, to avoid 64-bit
division. The code previously assumed that the error was at most 32-bit
worth of microseconds here, so I'm making the same assumption but add
an explicit test for it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
solo6x10 correctly deals with time stamps and will never
suffer from overflows, but it uses the deprecated 'struct timespec'
type and 'ktime_get_ts()' interface to read the monotonic clock.
This changes it to use ktime_get_ts64() instead, so we can
eventually remove ktime_get_ts().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Deblocking filter allows to reduce blocking artifacts and improve
visual quality. This is configurable via the V4L2 API but eventually
not applied to the encoder.
Note that alpha and beta deblocking values are 32-bit signed (-6;+6).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
H264 entropy mode can be selected via V4L2 API but is eventually not
applied. Configure encoder with selected mode, CALVC (def) or CABAC.
Note that hw/firmware also expects a CABAC model configuration which
currently doesn't have existing V4L2 API control. For now, use model_0
which seems always supported and so the default one.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check return value from call to devm_kzalloc() in order to prevent
a NULL pointer dereference.
This issue was detected with the help of Coccinelle.
Fixes: 4a5f8ae50b ("[media] davinci: vpif_capture: get subdevs from DT when available")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/tegra-cec/tegra_cec.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o
see include/linux/module.h for more information
This adds the license as "GPL", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This change resolves a new compile-time warning
when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o
see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION is also added.
Signed-off-by: Jesse Chan <jc@linux.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.
This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference.
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Johan Hovold <johan@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
time_to_tm() takes a time_t value that overflows in 2038 on 32-bit
systems. time64_to_tm() doesn't have this problem, so let's use that in
combination with ktime_get_real_seconds() to read a 64-bit time
value.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cam->buffers[] array has cam->num_frames elements so the > needs to
be changed to >= to avoid going beyond the end of the array. The
->buffers[] array is allocated in cpia2_allocate_buffers() if you want
to confirm.
Fixes: ab33d5071d ("V4L/DVB (3376): Add cpia2 camera support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mauro Carvalho Chehab