This patch connects IPU and and parallel display device tree
nodes using the OF graph bindings described in
Documentation/devicetree/bindings/media/video-interfaces.txt
The IPU ports correspond to the two display interfaces. The
order of endpoints in the ports is arbitrary.
Since the imx-drm node now only needs to contain links to the
display interfaces, it can be moved to the SoC dtsi level. At
the board level, only connections between the display interface
ports and panels have to be added.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch fixes the Television Encoder node's DDC I2C bus property to
use the common property name of 'ddc-i2c-bus' instead of just 'ddc'.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The A31 Colombus board has 3 I2C controllers that should be usable. However,
the first one is not working for some reason on the hardware I have been able
to test it on, while it should really be the same controller. Enable the i2c1
and i2c2 busses, and mark i2c0 as in failure in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The i2c controllers have a few muxing options on the A31. Enable the
ones found in the A31 Colombus board.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 has 4 I2C controllers that are the same than the one in the
other Allwinner SoCs, except for the fact that they are asserted in
reset by the reset unit.
Add these i2c controllers to the DTSI.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Marvell Dove's pinctrl does require some PMU regs for muxing PMU
functions to MPP pins. Recently, a discussion started about consolidating
Power Management Unit (PMU) into a single DT node. As we don't want
anymore DT ABI in the way, drop the corresponding reg property from
pinctrl node now. The driver will derive the registers from existing
reg properties.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The Armada 385 RD board is the reference design board from Marvell
for the Armada 385 SoC. This commit adds a Device Tree description for
this board, which enables the following features:
* Network interfaces
* I2C bus
* Serial port
* SPI bus, with a SPI flash
* PCIe interface
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
On Armada 385 DB, while the "rgmii" PHY connection mode works fine
with the generic PHY driver, it fails to work when the Marvell PHY
driver is enabled in the kernel configuration, due to a finer handling
of the PHY configuration. This is due to the fact that the phy
connection mode should instead be "rgmii-id", i.e with the TX/RX delay
mechanisms enabled.
This fixes the network operation on Armada 385 DB with
CONFIG_MARVELL_PHY=y. Without this patch and this option enabled, one
would only get messages such as:
mvneta f1070000.ethernet eth1: bad rx status 0cc10000 (crc error), size=70
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Since the Armada XP Matrix board has 4 GB of RAM and not 2 GB, we
update the Device Tree to take into account the correct amount of
memory. As noted in the new comment, the last 256 MB of RAM are in
fact not usable, due to the overlap with the MBus Window address
range.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Marvell has now provided bootloaders that are Device Tree capable for
the Armada XP GP board, and that also remap the internal register base
address to 0xf1000000. In addition, the bootloader now sets the MBus
Window base address to 0xf0000000, which allows to use much more RAM
in the last GB of RAM before the 4 GB limit (the entire space from
0xC0000000 to 0xFFFFFFFF was not usable due to being used for I/O, not
only the space from 0xF0000000 to 0xFFFFFFFF is used for I/O).
Therefore this commit:
* Updates the memory->reg Device Tree property with the fact that in
the first bank of RAM, memory up to 0xf0000000 can be used.
* Updates the soc->ranges Device Tree property with the fact that the
internal registers are now mapped at 0xf1000000.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Marvell has now provided bootloaders that are Device Tree capable for
the Armada XP DB board, and that also remap the internal register base
address to 0xf1000000. In addition, the bootloader now sets the MBus
Window base address to 0xf0000000, but on this board, this change
doesn't make much difference since the board is by default equipped
with 2 GB of RAM.
Therefore this commit updates the soc->ranges Device Tree property
with the fact that the internal registers are now mapped at
0xf1000000.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The latest Marvell bootloaders for various boards change the MBus
Window base address from 0xC0000000 to 0xF0000000, in order to make
more RAM in the first 4 GB actually usable by the kernel (RAM that is
covered by the MBus window is "shadowed" and therefore not usable).
However, our default PCIe memory and I/O apertures where sitting at
0xe0000000 (for memory) and 0xe8000000 (for I/O), which will now be
outside of the MBus Window range on those platforms. To make things
work, we have to ensure those apertures use addresses in the
0xF0000000 -> 0xFFFFFFFF range.
Of course this change of the MBus Window base address from 0xC0000000
to 0xF0000000 also comes with a change of the internal register base
address from 0xD0000000 to 0xF1000000.
We have therefore designed the following memory map:
* 0xF0000000 -> 0xF1000000: 16 MB, used for NOR flashes on Armada XP
GP and Armada XP DB.
* 0xF1000000 -> 0xF1100000: 1 MB, used for internal registers.
* 0xF8000000 -> 0xFFE00000: 126 MB, used for PCIe memory.
* 0xFFE00000 -> 0xFFF00000: 1 MB, used for PCIe I/O.
* 0xFFF00000 -> 0xFFFFFFFF: 1 MB, used for the BootROM mapping
There is one exception to this layout: the Armada XP OpenBlocks, which
has a 128 MB NOR flash, mapped from 0xF0000000 to 0xF8000000. This
does not conflict with the current change for the PCIe I/O and memory
apertures, and continues to work because on Armada XP OpenBlocks, the
bootloader is an old one, and continues to have internal registers
mapped at 0xD0000000.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Those are defined by the common PCI binding.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Tegra124 can support 4GB of RAM. With that much RAM (plus some memory-
mapped IO peripherals), more than 32-bits of physical address space is
required. Hence, convert all Tegra124 DTs to use 2 DT cells for address
space.
(I think this was suggested by Olof Johansson, but I'm not 100% sure)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
EVM board provides two Ethernet ports, this patch sets them into
dual_emac mode to provide two independent network interfaces.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add ABB device nodes for DRA7 family of devices. Data is based on
DRA7 Technical Reference Manual revision I (Sept 2013)
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add ABB device nodes for OMAP443x family of devices. abb_iva is
populated, but disabled as it is not used on current OMAP443x family,
but the node is used on OMAP446x family. Data is based on OMAP443x
Technical Reference Manual revision AN (April 2013).
ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)
[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).
[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add card detect gpio for SD card slot and include dt gpio header.
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add card detect gpio for SD card slot
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
enable sd card slot on am437x-gp-evm
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
and Documentation/devicetree/bindings/phy/ti-phy.txt.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The BCM11351 BRT board will never see the light of day. Remove the BRT
dts since it is not maintainable.
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Christian Daudt <bcm@fixthebug.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
this moves to generic IP module reset framework, and make other drivers
use common device_reset() API.
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Bin Shi <Bin.Shi@csr.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
The OMAP EHCI and OHCI controllers are not compatible with drivers
other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get
rid of the incompatible ids.
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Nishant Menon <nm@ti.com>
CC: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The necessary clock phandle for the EHCI clock is now provided
via device tree so we no longer need this legacy method.
Update the omap4-panda and omap5-uevm board DTS to provide the
necessary EHCI PHY clock information.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gumstix DuoVero is an OMAP4430-based Computer On Module.
Parlor is one of the available expansion board.
Tested features:
- GPMC ethernet
- HSUSB2 and OTG
- Audio out
- WiFi and Bluetooth (w2cbw0015 SDIO module)
- LED and button
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds basic support for the INet-97F_Rev_02 board found in various
low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02)
Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This add support for the A10-OLinuXino-LIME:
https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME
A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Based on fex file settings, the fex file also contains a mysterious line:
usb_hub_vcc_en_gpio = port:PB09<1><0><default><0>
Which also clashes with usbc0, which has:
usb_drv_vbus_gpio = port:PB09<1><0><default><0>
So if usb does not work properly we need someone with a hackberry to look
closer into this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add pbias regulator node as a child of system control
module - syscon.
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
MMC1 is the only MMC interface available on the platform. Further,
since the platform is based on older revision of SoC which is not
capable of doing multi-block reads, mark it with compatibility for the
same and add pinmux to ensure that all relevant pins are configured
for non-MMC boot mode.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <chris@printf.net>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds sunxi sata support to A20 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds sunxi sata support to A10 boards that have such a connector.
Some boards also feature a regulator via a GPIO and support for this is also
added.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Most sunxi boards with a sata connector also have a gpio controlled connector
for sata target power and almost all sunxi boards have a gpio controlled vbus
for usb1 and usb2.
This commit adds an include file for the regulators representing these
supplies, avoiding the need to copy and paste the regulator code to allmost
all sunxi board dts files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
With all the DT support preparation done, we are able to move Dove
to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot
for a while before removal.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This adds a DT node for the system-controller found on Marvell Dove
SoCs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Describe the T5325 using device tree properties, where possible. The
first version of this file was produced by Thomas Petazzoni.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
When using platform_driver instantiation, the i2c bus was given bus
number 0. The kirkwood-t5325 audio driver has this bus number hard
coded for the address of the codec. However by default device tree i2c
busses are dynamically allocated a bus number, starting from 1. Thus
the kirkwood-t5325 cannot find its audio codec. By adding an alias in
the DT file we can control the bus number and set it to 0. The codec
can then be found.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The binding has existed for a while, so add the missing node so it can
be used by devices.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
With kirkwood migrating into mach-mvebu, mvebu_v5_defconfig needs to
select ARCH_MVEBU. Unfortunately, this means that when building a v5
kernel, we unnecessarily build dtbs for the armada v7 boards.
To fix this, we instead select based on MACH_ARMADA_* on a per SoC basis.
Reported-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
We share global config registers by syscon node, add it to dove.dtsi.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Dove pinctrl uses additional registers to control MPPs. This patch first
increases existing pinctrl reg property by one register, and then adds
two new ranges for MPP4 and PMU MPP registers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Make use of the mvebu system controller, by placing a node into the
dtsi file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Now that the Feroceon L2 cache has a DT binding, make use of it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The periph_pll and sdram_pll can have multiple parents. Update the device tree
to list all the possible parents for the PLLs. Add an entry for the the
f2s_sdram_ref_clk, which is a possible parent for the sdram_pll.
Also remove the clock-frequency entry in the f2s_periph_ref_clk, as this
property should be placed in dts file.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
This patch adds the dts bindings documenation for the Altera SOCFPGA glue
layer for the Synopsys STMMAC ethernet driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: David S. Miller <davem@davemloft.net>
---
v3: Remove stray empty line at end of socfpga_cyclone5_socdk.dts
v2: Use the dwmac-sti as an example for a glue layer and split patch up
to have dts as a separate patch. Also cc dts maintainers since there is
a new binding.
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices.
DMM only requires address and irq information.
Add documentation for the DMM bindings.
Originally worked on by Andy Gross <andygro@gmail.com>
Cc: Andy Gross <andygro@gmail.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This patch:
- enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi)
- adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB)
present on following boards:
am43x-epos-evm:
On this board, NAND Flash control lines are muxed with QSPI, Thus only
one of the two can be used at a time. Selection is controlled by:
(a) dynamically driving following GPIO pin from software
GPMC_A0(GPIO) == 0 NAND is selected (default)
GPMC_A0(GPIO) == 1 eMMC is selected
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch updated MTD/NAND DT node binding to replace deprecated bindings
as per following commit.
commit ac65caf514
ARM: OMAP2+: cleaned-up DT support of various ECC schemes
Also Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch has following updates, specific to MTD/NAND DT
- update MTD NAND partition table to keep compatibility between
different boards and mainline u-boot.
- prefix 'NAND.' in names of NAND device MTD partitions to differentiate them
from other MTD device partitions (like NOR and QSPI)
Partition_Name Partition_Size
/dev/mtd0 NAND.SPL 1 block-size*
/dev/mtd1 NAND.SPL.backup1 1 block-size*
/dev/mtd2 NAND.SPL.backup2 1 block-size*
/dev/mtd3 NAND.SPL.backup3 1 block-size*
/dev/mtd5 NAND.u-boot-spl-os 2 block-size* [for falcon boot]
/dev/mtd4 NAND.u-boot 1 MB
/dev/mtd6 NAND.u-boot-env 1 block-size*
/dev/mtd7 NAND.u-boot-env.backup1 1 block-size*
/dev/mtd8 NAND.kernel till 0xA00000
/dev/mtd9 NAND.file-system till end of device
* am335x-evm uses NAND device with block-size=128KiB
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This requires vaux4.
Reset line isn't used yet, so wifi isn't reliable.
But it does work once per boot.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds basic sound support for gta04 board.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Gta04 using tcs2007 touchscreen. Add support for that.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable gpio3, gpio4, it will be used by gpio matrix keys. Also,
can be used by othe peripherals.
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
AM437x GP EVM DTS with pinmux information to make I2C on
EVM usable.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This adds support for the bq24150a chip to the
Nokia N900 DTS file.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This adds support for the isp1704 chip to the Nokia N900
DTS file.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This adds support for the N900's headphone
amplifier to the N900 DTS file.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Add support for tsl2563 light sensor to the Nokia N900.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Add Keyboard Matrix information to N900's DTS file.
This patch maps the keys exactly as the original
board code.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Add keypad node to twl4030, so that board DTS
files can just add the keymap.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
MMC 8 bit mode operation depends on dip switch setting which is not
obvious - The current board file has this description. However, with
removal of the board file in the future, this information will be lost
and has to be rediscovered.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
Craneboard is a hardware development platform based on the Sitara
AM3517 ARM Cortex - A8 microprocessor device - see [1] for more
details. Add basic devices for craneboard as replacement for the board
file scheduled for removal as part of device tree conversion
[1] http://craneboard.org
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Add dt-nodes for the sram on rk3066 and rk3188 including the reserved section
needed for smp bringup.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
Enable second USB channel and set it into 'host' mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Making it possible to reference and therefor change (disable) this
device node from other dts file which import this dtsi file.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Lukas Stockmann <lukas.stockmann@siemens.com>
Cc: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add missing interrupt properties to the ecap0, ecap1, and ecap2
nodes.
Signed-off-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock.
OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use
dpll_mpu clock.
Latency used is the generic latency defined in omap-cpufreq
driver.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
INCOstartec LILLY-DBB056 is a carrier board (baseboard) for
computer-on-module LILLY-A83X.
This patch adds device-tree support for most of its features.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
INCOstartec LILLY-A83X module is a TI DM3730xx100 (OMAP3) SoC
computer-on-module.
This patch adds device tree support for most of its features.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The clock for audio is sourced from virt_24000000_ck, so the correct
frequency is 24000000.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: <stable@vger.kernel.org> # 3.13.x
Signed-off-by: Tony Lindgren <tony@atomide.com>
In omap2420.dtsi and omap2430.dtsi disable all mcbsp nodes and board dts
files can explicitly enable the mcbsp they are using.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly
enable the mcbsp they are using.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Board dts files will need to enable the IP nodes which they are using and
does not have to care about the not used ones (to disable them).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All audio nodes has been set to disabled state in omap4.dtsi file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All audio nodes has been set to disabled state in omap4.dtsi file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Board dts files will need to enable the IP nodes which they are using and
does not have to care about the not used ones (to disable them).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Attach the pinctrl nodes to their respective device node:
mcbsp1, mcbsp2, dmic, mcpdm and twl6040.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Attach the pinctrl nodes to their respective device node:
mcbsp1, mcpdm and twl6040.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the hwspinlock device tree node for AM43xx family
of SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a new generic property "#hwlock-cells" to the hwspinlock
DT nodes on OMAP4, OMAP5 and AM33xx. This common property allows
different platform implementations to define the args specifier
length. OMAP implementations will always use a value of 1.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for CM-T3517 CoM and SBC-T3517 board.
reused common support for sbc-t3x boards
(omap3-cm-t3x.dtsi, omap3-sb-t35.dtsi):
* SB-T35 baseboard eth
* MMC1, UART3
* HS USB Port 1/2
* I2C1/3
* Heartbit led
Added basic support for:
* MMC1 wp/cd signals
* CM-T3517 Usb Hub
* WL12xx WiFi chip
* Davinci EMAC
* AM35X OTG
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add support for CM-T3530 CoM and SBC-T3530 board.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
GPIO167 is used as SB-T35 baseboard USB Hub reset.
Add GPIO167 pinmux.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add HS USB Host support along with USB PHYs and power supply regulators
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add pullup for twl4030 GPIO_0 used as MMC1 card detect signal.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
GPIO186 is used for the heartbeat led.
Setup the pinmux for the GPIO186.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
SB-T35 baseboard features SMSC9220 Ethernet chip which requires
its own power supply regulators.
Add baseboard specific regulators for the SB-T35 Ethernet chip.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Disable mmc3 interface, since is not used on sbc-t3x boards.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Use omap specific pinctrl defines (OMAP3_CORE1_IOPAD) to configure
the padconf register offset.
This simplify further support of CompuLab's boards based on omap36xx,
omap34xx and am35x.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
update aliases for the ssi clocks ssi_ssr_fck, ssi_sst_fck and ssi_ick
to make them consistent for omap34xx and omap36xx. This makes it
possible to reference the clocks from generic omap3 dts files.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds a devicetree node for the backup battery regulator.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch is based on commit:
016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")
and fixes a boot hang due the IGEP board being wrongly initialized
as an OMAP3430 platform instead of an OMAP3630.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Device tree node name should reflect the kind of device rather than the
specific name of the device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Equal signs should always be preceded and followed by a single space in
device tree files.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
USB1 and USB3 are routed to two external connectors, while USB2 is used
for the integrated webcam.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The USB controllers on Tegra124 are backwards-compatible with those
found on Tegra30.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Venice2 has a 12.9" (2560x1700) panel connected to the eDP output of the
Tegra124. The panel has an EDID to describe the video timings but needs
a few extra nodes to get the backlight to come up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The SOR block on Tegra124 can be used standalone to drive LVDS panels or
used in conjunction with the DPAUX block to support eDP.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The version of host1x on Tegra124 is largely compatible with that on
earlier Tegra generations. Some of the registers have moved around or
expanded to allow for more capability, so a separate compatible string
is still required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The SDMMC3 interface is supplied with 1.8V by the PMICs LDO6.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Some of the regulators and the relationships to other regulators are
wrong. This commit attempts to rectify this by making them more similar
to what the schematics contain. This starts by adding a +VDD_MUX supply
that represents the 12V input and derives the main +3.3V_SYS and +5V_SYS
supplies from that. The majority of the other regulators derive from one
of those three.
While at it, rename the regulators to match the names in the schematics
to make them easier to match up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Added device tree nodes to enable SMP on msm8660, msm8960, and msm8974
* Added Random Number Generator DT nodes for msm8974 and msm8960 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=4u6J
-----END PGP SIGNATURE-----
Merge tag 'qcom-dt-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt
Merge "Qualcomm ARM Based Device Tree Updates for v3.15" from Kumar Gala
* Added device tree nodes to enable SMP on msm8660, msm8960, and msm8974
* Added Random Number Generator DT nodes for msm8974 and msm8960 SoCs
* tag 'qcom-dt-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: dts: qcom-msm8960-cdp: Add RNG device tree node
ARM: dts: qcom: Add RNG device tree node
ARM: dts: qcom: Add nodes necessary for SMP boot
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The module 0 clock compatibles were changed between the time the patch was sent
and it was merged. Update the compatibles.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add i2c dts node properties for eDMA support, them depend on the eDMA driver.
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Introduce "altr,socfpga-dw-mshc" to enable Altera's SOCFPGA platform
specific implementation of the dw_mmc driver.
Also add the "syscon" binding to the "altr,sys-mgr" node. The clock
driver can use the syscon driver to toggle the register for the SD/MMC
clock phase shift settings.
Finally, fix an indentation error for the sysmgr node.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Chris Ball <chris@printf.net>
Keystone2 Edison (K2E) is a Quad Cortex A15 based SoC with
1 DSP. It has standard peripherals such as i2c, spi, uart, timer,
pcie, etc similar to k2hk, but without wireless hardwares. This
patch add support for k2 Edison SoC and EVM. This re-uses the common
keystone.dtsi to include common bindings across the various k2
devices.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Keystone2 Lamarr (K2L) is a dual Cortex A15 core based SoC with
4 DSPs. It has standard peripherals such as i2c, spi, uart, timer,
pcie etc., similar to k2hk, but different set of wireless hardware.
This patch add support for k2 Lamarr SoC and EVM. This re-uses the
common keystone.dtsi to include common bindings across the various
k2 devices.
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Current keystone.dtsi includes SoC specific definitions for K2HK
SoCs. In order to support two addition keystone devices, k2 Edison
and K2 Lamarr and corresponding EVMs, This patch restructure the
dts files for the following:-
- All clock nodes that are only available in k2hk SoC are moved
from keystone-clocks.dtsi to a new k2hk-clocks.dtsi include file
- The CPU nodes are now part of the soc specific k2hk.dtsi.
- Change the compatibility string to ti,k2hk-evm and change
the model name accordingly
- Finally include k2hk-clocks.dtsi in k2hk.dtsi and that in
k2hk-evm.dts
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
As noted in recent discussions the name of the core clock for
the PL022 derived SPI blocks is erroneously named in the
U300 device tree. The kernel doesn't currently use the name,
but may do so soon so let use rename all these clocks in
accordance with the name given in the PL022 TRM (ARM DDI 0194G).
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As noted in recent discussions the name of the core clock for
the PL022 derived SPI blocks is erroneously named in the
Ux500 device trees. The kernel doesn't currently use the name,
but may do so soon so let use rename all these clocks in
accordance with the name given in the PL022 TRM (ARM DDI 0194G).
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add DT support for SDHI0, SDHI1 and SDHI2 on Koelsch.
The board specific handling of CD and WP pins are
using GPIOs. SDHI0 and SDHI1 are hooked up to regular
SD connectors while SDHI2 is using micro-SD which
is lacking WP signal.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add SDHI0, SDHI1 and SDHI2 to the r8a7791 DTSI.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The patch replaces magic numbers with macros defined in DT header
in exynos5440 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos5420 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos5250 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
The patch replaces magic numbers with macros defined in DT header
in exynos4 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To prevent problems later with mvebu_v5_defconfig builds, we restrict
the scope of the changes this series makes.
Selecting ARCH_KIRKWOOD and MACH_KIRKWOOD is necessary during the
migration from mach-kirkwood to mach-mvebu. Until the last four legacy
kirkwood board files have a DT equivalent, we need to support building
DT from both mach-kirkwood and mach-mvebu.
Reported-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Both USB_VBUS_EN0 and USB_VBUS_EN1 are configured the same way, so they
can be combined into a single node. While at it, don't configure them as
pull-up since they already have external pull-ups. Also U-Boot doesn't
configure them as pull-up either.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
To disable a device tree node, the status property should be set to
"disabled", not "disable".
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
- mvebu
- add audio for Armada 370 DB
- enable Armada 370/XP watchdog
- kirkwood
- convert board rd88f6281
- add board rd88f6192
- dove
enable watchdog
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=F2YM
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.15-2' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu dt changes for v3.15 (incremental round #2)" from Jason Cooper:
- mvebu
- add audio for Armada 370 DB
- enable Armada 370/XP watchdog
- kirkwood
- convert board rd88f6281
- add board rd88f6192
- dove
enable watchdog
* tag 'mvebu-dt-3.15-2' of git://git.infradead.org/linux-mvebu:
ARM: dove: Enable Dove watchdog in the devicetree
ARM: kirkwood: Add RSTOUT 'reg' entry to devicetree
ARM: mvebu: Enable Armada 370/XP watchdog in the devicetree
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
ARM: Kirkwood: Add DT description of rd88f6192.
ARM: mvebu: enable S/PDIF audio in Armada 370 DB Device Tree
ARM: mvebu: add audio support to Armada 370 DB
ARM: mvebu: add I2C0 muxing option for Armada 370 SoC
ARM: mvebu: add audio I2S controller to Armada 370 Device Tree
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* qcom/cleanup:
ARM: qcom: Rename various msm prefixed functions to qcom
clocksource: qcom: split building of legacy vs multiplatform support
ARM: qcom: Split Qualcomm support into legacy and multiplatform
clocksource: qcom: Move clocksource code out of mach-msm
ARM: msm: kill off hotplug.c
ARM: msm: Remove pen_release usage
ARM: dts: msm: split out msm8660 and msm8960 soc into dts include
This cleanup branch is a dependency for the following qcom driver changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit updates bcm11351.dtsi with the new compatible string for
the same driver.
Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Daudt <bcm@fixthebug.org>
DT nodes should be named according to the type of object that they
represent rather than the identity. DT nodes that contain a reg
property should include a unit address in their name. Fix these issues.
Add clock-output-names properties to the nodes so that the clocks get
named something meaningful. This works around the fact that the fixed
clock driver names clocks after the short node name, i.e. not including
the unit address.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Define the Koelsch board dependent part of the Ether device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7791 part of the Ether device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the Lager board dependent part of the Ether device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7790 part of the Ether device node.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The sdio1 interface pins are routed to an unpopulated daughter card
connector on the bcm28155-ap board. Thus there is no need to mark
this interface as enabled.
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Replace the "fake" clocks defined in the "bcm11351.dtsi" device tree
file with real definitions backed by the new BCM281xx clock driver.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Signed-off-by: Matt Porter <mporter@linaro.org>
Use the componentised device support for imx-drm. This requires all
the sub-components and the master device to register with the component
device support.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Extracted from another patch by Fabio Estevam, this adds the DT
configuration for HDMI output on the IMX6 SoCs
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The A13 has 3 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10s has 3 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A20 has 4 SPI controllers compatible with the one found in the A10. Add
them in the DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch adds USBH2 devicetree node of Phytec PCM970 RDK.
Additionally, adds fixed regulator to provide functionality
without dummy-regulator in the kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds the missing (Universal serial bus) USB devicetree
nodes for i.MX27 CPUs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
vf610 has two ADC controllers, and vf610-twr board ADC0_SE5 pin connect
to sliding rheostat for ADC test, other ADC pins connect to connectors for
future use.
Add support for ADC0_SE5.
CC: Jonathan Cameron <jic23@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: Peter Meerwald <pmeerw@pmeerw.net>
CC: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
A collection of fixes for ARM platforms. Most are fixes for DTS files,
mostly from DT conversion on OMAP which is still finding a few issues here
and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache configuration
fix for Tegra, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=i7LS
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
LDO10 is directly connected to MMC controller. Register this
through vmmc-supply property.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Added GPIO based wake up key to Arndale octa board.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Current audio clock doesn't have dependency to device/driver,
but, it is not good design for DT support.
To avoid branch merge conflict issue,
it uses this load map, and this patch is 1) part.
1) add old/new style clock in platform
2) add new style clock method in driver
3) remove old tyle clock from platform
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Some boards might not have RTC xtal, so RTC shouldn't really be
enabled by default. Enable it in the required board files. For
now enable it for all board files to maintain the enabled status
exisitng prior to this patch.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Some boards might not have RTC xtal, so RTC shouldn't really be
enabled by default. Enable it in the required board files.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Add Maxim 77686 PMIC node for EXYNOS5250 based SMDK5250 board.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
To allow EXYNOS4412 based Odroidx and Origen-quad boards to operate between
200MHz to 1.4Ghz, update the vdd_arm voltage range to operate between these
cpu clock speeds.
Cc: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
In EXYNOS5 series SoCs, PMU has registers to enable/disable mask/unmask
watchdog timer which is not the case with s3c series SoCs so, there is a
need to have different compatible names for watchdog to handle these pmu
registers access.
Hence this patch removes watchdog node from Exynos5.dtsi common file and
make it separate by updating existing node in Exynos5250 and adding new node
to Exynos5420. This patch also makes the watchdog node enabled by default
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
According to Documentation/devicetree/bindings/regulator/regulator.txt
regulator nodes should not be placed under 'simple-bus'.
Mark Rutland also explains about it at:
http://www.spinics.net/lists/linux-usb/msg101497.html
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Move the kirkwood DT support into mach-mvebu, and make them part of
ARCH_MULTI_V5. Minimal changes have been made in order to make it
boot. Cleanup of the header files and integration with mvebu will
take place in following patches.
In order to help Debian transition between mach-kirkwood and
mach-mvebu, the DTS files are compiled for both, allowing Debian to
continue using mach-kirkwood until all remaining boards are supported
by mach-mvebu. Debian is then expected to simply swap from
mach-kirkwood to mach-mvebu and mach-kirkwood will be removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The mv88f6281gtw_ge has a ethernet switch connected to the ethernet
port of the SoC. Convert the platform device instantiation to a DT
instantiation.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: florian@openwrt.org
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Instead of hardcoding the values of the interrupt flags, use the
macros provided by <include/dt-bindings/interrupt-controller/irq.h>
and <include/dt-bindings/interrupt-controller/arm-gic.h> for the
Armada 375 and Armada 38x Device Tree files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Instead of hardcoding 0 and 1 to indicate SPI and PPI GIC interrupts,
use the definitions of <dt-bindings/interrupt-controller/arm-gic.h> to
clarify the Device Tree code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Some of the Armada 375/38x DTs that were recently submitted were still
using the old-style /include/ instead of the new-style, C-preprocessor
based #include. Since we are going to start including more headers,
switching to the C-preprocessor based includes is important.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Add device tree fragments and files to support many of the kirkwood
based Synology NAS devices. This is a modification of
Andrew Lunn's <andrew@lunn.ch> translation of the board setup file
maintained by Ben Peddell <klightspeed@killerwolves.net>
The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units.
All other Synology Kirkwood-based DiskStations and RackStations use
the Seiko S35390A RTC.
Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed
with the built-in SATA interface activity/presence pins on mpp 20-23,
while the 4-bay units use ge01 and a PCIe SATA controller, and put the
software controlled HDD leds on mpp 36-43.
Most of the 6281 units with HDD power controls use mpp 29 and 31, while
most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45
and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and
most 4-bay units didn't have a separate power control for HDD1. These
power controls are presumably to limit startup current from the 12V
brick power supply.
Instead of using separate dtsi files in a synology directory, this
patch uses a single dtsi file containing all of the modules for
these boards, with all of the modules not common to all boards
disabled. The board dts files then enable the appropriate modules for
their boards.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
- kirkwood
- new board QNAP 419
- new board Excito Bubba B3
- mvebu
- use gpio and input defines for Armada 370/XP boards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=e8X7
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-3.15' of git://git.infradead.org/linux-mvebu into next/dt
Merge "mvebu DT changes for v3.15" from Jason Cooper:
- kirkwood
- new board QNAP 419
- new board Excito Bubba B3
- mvebu
- use gpio and input defines for Armada 370/XP boards
* tag 'mvebu-dt-3.15' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: use input DT defines in Armada 370/XP boards
ARM: mvebu: use GPIO DT defines in Armada 370/XP boards
ARM: Kirkwood: Add DT description of QNAP 419
ARM: Kirkwood: Add support for Excito Bubba B3
Signed-off-by: Olof Johansson <olof@lixom.net>
- Move integrator clock definitions to the device tree, alter
clock and timer drivers accordingly.
- Alter the VIC irqchip driver to support cascaded VICs off
a parent IRQ controller.
- Update the IM-PD1 plugin code to use managed resources.
- Register the VIC on the IM-PD1.
- Select the PL061 GPIO block for the IM-PD1 on the
Integrator/AP.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a4vs
-----END PGP SIGNATURE-----
Merge tag 'integrator-for-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/drivers
Merge "Integrator/Versatile base patch stack for the v3.15 series"
from Linus Walleij:
"this is a set of patches I have sent for review and failed to get ACKs
from the proper subsystem maintainers after repeated pings. However I
now need to have this rotated in linux-next as a base for multiplatform,
so please pull it in, it is all ARM drivers anyway. Russell pointed out
some things and these have been fixed and iterated in this series."
- Move integrator clock definitions to the device tree, alter
clock and timer drivers accordingly.
- Alter the VIC irqchip driver to support cascaded VICs off
a parent IRQ controller.
- Update the IM-PD1 plugin code to use managed resources.
- Register the VIC on the IM-PD1.
- Select the PL061 GPIO block for the IM-PD1 on the
Integrator/AP.
* tag 'integrator-for-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: select GPIO block
ARM: integrator: register the IM-PD1 VIC
ARM: integrator: use managed resources for the IM-PD1
irqchip: support cascaded VICs
irqchip: vic: update the base IRQ member correctly
clk: versatile: respect parent rate in ICST clock
clk: versatile: pass a parent to the ICST clock
ARM: integrator: switch to fetch clocks from device tree
ARM: SP804: make Integrator/CP timer pick clock from DT
ARM: integrator: define clocks in the device trees
Signed-off-by: Olof Johansson <olof@lixom.net>
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of of_device_ids,
but it more than one entry will match, then the device driver may choose
the wrong one. Commit 105353145e, "match each node compatible against
all given matches first", was queued for v3.14 but ended up causing
other bugs. Commit 06b29e76a7 attempted to fix it but it had other bugs.
Merely reverting the fix and waiting until v3.15 isn't a good option
because there is code in v3.14 that depends on the revised behaviour to
boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also adds
new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc pull,
but moving the test case data out of out of arch/arm so that it could be
validated on other architectures was important.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=wJz0
-----END PGP SIGNATURE-----
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit 105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit 06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
Allows us to probe the performance counters on Krait CPUs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[olof: Moved 8960 contents to the dtsi instead]
Signed-off-by: Olof Johansson <olof@lixom.net>
DT nodes that contain a reg property should include a unit address in
their name. Add the missing unit addresses.
The unit address in a node name must match the value in the reg property.
Fix the cases where they don't match.
Don't fix the /clocks/* node names yet; that causes problems the clock
driver to attempt to register multiple clocks with the same name, which
fails.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
This patch adds support for SATA on Phytec phyFLEX-i.MX6 Quad module.
Signed-off-by: Ashutosh singh <ashutosh.s@phytec.in>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds support for GPMI-NAND on Phytec phyFLEX-i.MX6 Quad module.
Signed-off-by: Ashutosh singh <ashutosh.s@phytec.in>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds support for USB_HOST on Phytec phyFLEX-i.MX6 Quad module.
Signed-off-by: Ashutosh singh <ashutosh.s@phytec.in>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds support for USB_OTG on Phytec phyFLEX-i.MX6 Quad module.
Signed-off-by: Ashutosh singh <ashutosh.s@phytec.in>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The compatible property should be m41t62, not mt41t62, so fix this.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add the necessary DT node to probe the rng driver on
msm8960-cdp platform.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add the necessary DT node to probe the rng driver on
msm8974 platforms.
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Add the necessary nodes to support SMP on MSM8660, MSM8960, and
MSM8974/APQ8074. While we're here also add in the error
interrupts for the Krait cache error detection.
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
[sboyd: Split into separate patch, add error interrupts]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Unlike other build products in the Linux kernel, there is no 'make
*install' mechanism to put devicetree blobs in a standard place.
This commit adds a new 'dtbs_install' make target which copies all of
the dtbs into the INSTALL_DTBS_PATH directory. INSTALL_DTBS_PATH can be
set before calling make to change the default install directory. If not
set then it defaults to:
$INSTALL_PATH/dtbs/$KERNELRELEASE.
This is done to keep dtbs from different kernel versions separate until
things have settled down. Once the dtbs are stable, and not so strongly
linked to the kernel version, the devicetree files will most likely move
to their own repo. Users will need to upgrade install scripts at that
time.
v7: (reworked by Grant Likely)
- Moved rules from arch/arm/Makefile to arch/arm/boot/dts/Makefile so
that each dtb install could have a separate target and be reported as
part of the make output.
- Fixed dependency problem to ensure $KERNELRELEASE is calculated before
attempting to install
- Removed option to call external script. Copying the files should be
sufficient and a build system can post-process the install directory.
Despite the fact an external script is used for installing the kernel,
I don't think that is a pattern that should be encouraged. I would
rather see buildroot type tools post process the install directory to
rename or move dtb files after installing to a staging directory.
- Plus it is easy to add a hook after the fact without blocking the
rest of this feature.
- Move the helper targets into scripts/Makefile.lib with the rest of the
common dtb rules
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.
Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
* Add support for determining smp ops based on device tree.
* Add DT binding specs for Krait/Scorpion enable method
* Add DT binding specs for various Krait Processor controller complexes
* Add SoC SMP support for Krait Processor Subsystem v1 & v2
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=R5RP
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/soc
Merge "Qualcomm ARM Based SoC Updates for v3.15" from Kumar Gala:
* Add support for determining smp ops based on device tree.
* Add DT binding specs for Krait/Scorpion enable method
* Add DT binding specs for various Krait Processor controller complexes
* Add SoC SMP support for Krait Processor Subsystem v1 & v2
* tag 'qcom-soc-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: qcom: Add SMP support for KPSSv2
ARM: qcom: Add SMP support for KPSSv1
devicetree: bindings: Document qcom,saw2 node
devicetree: bindings: Document qcom,kpss-acc
devicetree: bindings: Document Krait/Scorpion cpus and enable-method
ARM: qcom: Re-organize platsmp to make it extensible
ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp
ARM: qcom: Rename various msm prefixed functions to qcom
clocksource: qcom: split building of legacy vs multiplatform support
ARM: qcom: Split Qualcomm support into legacy and multiplatform
clocksource: qcom: Move clocksource code out of mach-msm
ARM: msm: kill off hotplug.c
ARM: msm: Remove pen_release usage
ARM: dts: msm: split out msm8660 and msm8960 soc into dts include
Signed-off-by: Olof Johansson <olof@lixom.net>
pin-related configuration from the Ux500 board files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GPK5
-----END PGP SIGNATURE-----
Merge tag 'ab8500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
Merge "Ux500 DT conversion" from Linus Walleij:
AB8500 device tree conversion and the deletion of all pin-related
configuration from the Ux500 board files.
* tag 'ab8500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: move last AB8505 set-up to DT
ARM: ux500: move AB8500 clock out pins to DT
ARM: ux500: move AB8500 modem I2C settings to DT
ARM: ux500: move AB8500 EXTCPENA from board file to DT
ARM: ux500: move AB8500 DMIC settings to DT
ARM: ux500: move AB8500 USB UICC settings to DT
ARM: ux500: move AB8500 audio interface 1 settings to DT
ARM: ux500: move AB8500 PWM out settings to device tree
ARM: ux500: move AB8500 YCBCR settings to device tree
ARM: ux500: move AB8500 GPIOs to device tree
Signed-off-by: Olof Johansson <olof@lixom.net>
Split of the multiplatform support for the Qualcomm SoCs into a mach-qcom
while we leave mach-msm as legacy support. Also, some smp and device tree
related cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: GPGTools - https://gpgtools.org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=hwTa
-----END PGP SIGNATURE-----
Merge tag 'qcom-cleanup-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/cleanup
Merge "General cleanups for MSM/QCOM for 3.15" from Kumar Gala:
Split of the multiplatform support for the Qualcomm SoCs into a mach-qcom
while we leave mach-msm as legacy support. Also, some smp and device tree
related cleanups.
* tag 'qcom-cleanup-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: qcom: Rename various msm prefixed functions to qcom
clocksource: qcom: split building of legacy vs multiplatform support
ARM: qcom: Split Qualcomm support into legacy and multiplatform
clocksource: qcom: Move clocksource code out of mach-msm
ARM: msm: kill off hotplug.c
ARM: msm: Remove pen_release usage
ARM: dts: msm: split out msm8660 and msm8960 soc into dts include
Signed-off-by: Olof Johansson <olof@lixom.net>
- New SoC device tree support for imx35 and imx50
- A good number of new board support: imx25-eukrea, imx28-duckbill,
imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac,
MCIMX53-START-R and Ka-Ro TX53.
- Quite some updates and tweaking on imx27 phycore and apf27dev boards
- Add pinfunc headers for imx25, imx27 and imx50
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data
- Use generic node name for fixed regulator
- Use clock defines in imx5 DTS files
- Use macros for interrupt and gpio flags
- A plenty of random updates on various SoC and board device tree
sources, adding pinctrl settings, device nodes, properties, aliases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJS94QdAAoJEFBXWFqHsHzO9KkH/i23jhVVQcb2XXh81moW1LAM
QsPn3MpdPqTi3XDZ7mbsFlMJrucs1tHhMbnx9vI3Sc3IUtc/GPMqrF3CUwgd+hpZ
TfA79oJPeDYAj/7JqqsEnhQyBvlsUf4xdqFs8N0A0YxN9xfVtumpWHHFlOU2s3IW
tLczVI2dtXEzvvrFXlQtGv/fKKGZKzohwtbn4lE0CopeqGihvBBNr/v1SpoTm91S
Qxs+5hZR8GOmtatUPnirE9Di4U4T0cYcpBqk9iCWUQ2fvPNrk9/AE7zaohcX6z68
tUI2l8iU/fMx5t84m1brK/aVD+tRI9qRaUJficCshMzZz/kqSIR/hRkY6uecB0A=
=CCqs
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge "i.MX device tree changes for 3.15" from Shawn Guo:
- New SoC device tree support for imx35 and imx50
- A good number of new board support: imx25-eukrea, imx28-duckbill,
imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac,
MCIMX53-START-R and Ka-Ro TX53.
- Quite some updates and tweaking on imx27 phycore and apf27dev boards
- Add pinfunc headers for imx25, imx27 and imx50
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data
- Use generic node name for fixed regulator
- Use clock defines in imx5 DTS files
- Use macros for interrupt and gpio flags
- A plenty of random updates on various SoC and board device tree
sources, adding pinctrl settings, device nodes, properties, aliases.
* tag 'imx-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (89 commits)
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
ARM: dts: imx5: use imx51-ssi
ARM: dts: imx51: Add mmc aliases
ARM: dts: imx53: Add mmc aliases
ARM: dts: imx53: add support for Ka-Ro TX53 modules
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
ARM: dts: imx28-apf28dev: add user button
ARM: dts: i.MX51: Switch to use standard definitions for input subsystem
ARM: dts: i.MX53: add support for MCIMX53-START-R
ARM: dts: i.MX53: move common QSB nodes to new file
ARM: dts: imx53-evk: Remove board support
ARM: dts: vf610: use the interrupt macros
ARM: dts: imx53: Add gpio and input dt includes.
ARM: dts: i.MX27: Add SSI nodes
ARM: dts: mxs: add mxs phy controller id
ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM
ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC
ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC
ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
ARM: dts: imx27-phytec-phycore-som: Add NFC pin group
...
- A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6,
nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and
Zealz GK802
- Update imx6q-sabrelite device tree and add Dual Lite/Solo support
- Move pins that are used by particular client device out of hog group
- Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687
ENET: Only the ENET wake-up interrupt request can wake the system
from Wait mode.)
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data
- Use generic node name for fixed regulator
- Update OPP table for cpufreq support
- Random updates on various board device tree sources, adding pinctrl
settings, device nodes, properties, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJS+I4nAAoJEFBXWFqHsHzO39AIALs0nns7ew/KyO4brtDP/gpA
dgTtpD5+eiddSng41aTun0WzUp/4r9iNL79lBfSUYJpo7+ZaQwpSlPbTz1wUMGtr
mINmTXNXHHLCufm8ywQMYrajF+wQKXEMAJ7/OLyxFzQTwsKW9OWr4DLiTgvVLuKs
IOD9scHe2KNRFJjfPmaS5w5W4h+Xs2VJO4mmCmy7zFgQ8MvIGpKGBZ3k3Y/c0Vqq
w8VjL2RPnK9Q8C4sjweP7QRvdnFyn4ClVTPGFQ8c/xs7QqC7cVIc6FSqlXAvWVmx
lnKv4y9+J4RyVGvQi9KwyscpEx1aD5xJv5hwl0MeoN8Kas9qhSfP9KfqWc9fL9I=
=tiCP
-----END PGP SIGNATURE-----
Merge tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge "i.MX6 device tree changes for 3.15" from Shawn Guo:
- A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6,
nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and
Zealz GK802
- Update imx6q-sabrelite device tree and add Dual Lite/Solo support
- Move pins that are used by particular client device out of hog group
- Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687
ENET: Only the ENET wake-up interrupt request can wake the system
from Wait mode.)
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data
- Use generic node name for fixed regulator
- Update OPP table for cpufreq support
- Random updates on various board device tree sources, adding pinctrl
settings, device nodes, properties, etc.
* tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (62 commits)
ARM: dts: imx6q: Add support for Zealz GK802
ARM: dts: imx6: Add DFI FS700-M60 board support
ARM: dts: imx6: use imx51-ssi
ARM: dts: imx6qdl: Add mmc aliases
ARM: dts: imx6q: Add spi4 alias
ARM: dts: imx6qdl-sabreauto: Add LVDS support
ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board.
ARM: dts: imx6sl: add ocram device support
ARM: dts: imx6qdl: enable dma for spi
ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
ARM: dts: imx6: add mxs phy controller id
ARM: dts: imx6: add anatop phandle for usbphy
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.
ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.
ARM: dts: imx6qdl: use interrupts-extended for fec
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
ARM: dts: imx6q-sabrelite: PHY reset is active-low
ARM: dts: imx6: Use 'vddarm' as the regulator name
ARM: dts: imx6qdl-sabresd: Add power key support
...
* r8a7791 (R-Car M2) based Koelsch board
- Enable GPIO Keys, (1+1)GiB memory, SATA0 and serial ports
- Add VIN and thermal clocks
- Remove r8a7791-koelsch-reference.dts
* r8a7790 (R-Car H2) based Lager board
- Replace IRQ type numerical values with macros
- Enable SATA0 and serial ports
- Add VIN and thermal clocks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=GRoY
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Merge "Renesas ARM Based SoC DT Updates for v3.15" from Simon Horman:
* r8a7791 (R-Car M2) based Koelsch board
- Enable GPIO Keys, (1+1)GiB memory, SATA0 and serial ports
- Add VIN and thermal clocks
- Remove r8a7791-koelsch-reference.dts
* r8a7790 (R-Car H2) based Lager board
- Replace IRQ type numerical values with macros
- Enable SATA0 and serial ports
- Add VIN and thermal clocks
* tag 'renesas-dt-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros
ARM: shmobile: r8a7790: Fix serial ports DT compatible strings
ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts
ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi
ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts
ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi
ARM: shmobile: r8a7791: Add SATA clocks to device tree
ARM: shmobile: r8a7790: Add SATA clocks to device tree
ARM: shmobile: r8a7791: Add VIN clocks to device tree
ARM: shmobile: r8a7790: Add VIN clocks to device tree
ARM: shmobile: r8a7790: Add serial ports to the device tree
ARM: shmobile: r8a7791: Add serial ports to the device tree
ARM: shmobile: r8a7790: Add thermal clock in device tree
ARM: shmobile: r8a7791: Add thermal clock in device tree
ARM: shmobile: koelsch: (1+1)GiB memory in DT
ARM: shmobile: Add GPIO keys to Koelsch DTS
ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts
Signed-off-by: Olof Johansson <olof@lixom.net>
On imx6sl-evk board the VGEN1 regulator powers up the NVCC_1P2V domain of the
imx6sl SoC, so we need to keep it always powered.
According to imx6sl datasheet the GPIO block has three supplies:
NVCC33_IO, NVCC18_IO and NVCC_1P2V and it states that:
"All digital I/O supplies (NVCC_xxxx) must be powered under normal conditions
whether the associated I/O pins are in use or not"
This problem has been observed by the fact that a GPIO connected to an LED could
not work when the PMIC driver was enabled.
Keeping VGEN1 regulator always enabled fixes the problem.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The D9 LED controlled by gpio on the imx6qdl-sabreauto
CPU board is a debug LED according to the board design.
This patch adds the relevant device tree nodes to the
imx6qdl-sabreauto device tree file to support this LED.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds and enables simple-card support in DT node.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Venice2 contains an SPI Flash chip, which contains the bootloader.
Add this to the DT, so the kernel can access it.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cardhu has a PCA9546 for I2C bus extension, which connects to 3
cameras. It's required for Tegra V4L2 soc camera driver and camera
sensor drivers.
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
The number of the head specifies the index of the display controller
unit and is required to properly configure outputs so that they receive
video data from the correct source.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This alias entry was evidently cut/paste from a different board, and
not correctly updated to match Cardhu. Fix this.
Fixes: 553c0a200e ("ARM: tegra: set up /aliases entries for RTCs")
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull ARM fixes from Russell King:
"A range of ARM fixes. Biggest change is the stage-2 attributes used
for for hyp mode which were wrong. I've killed some bits in a couple
of DT files which turned out not to be required, and a few other
fixes.
One fix touches code outside of arch/arm, which is related to sorting
out the DMA masks correctly. There is a long standing issue with the
conversion from PFNs to addresses where people assume that shifting an
unsigned long left by PAGE_SHIFT results in a correct address. This
is not the case with C: the integer promotion happens at assignment
after evaluation. This fixes the recently introduced dma_max_pfn()
function, but there's a number of other places where we try this
directly on an unsigned long in the mm code"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
Fix uses of dma_max_pfn() when converting to a limiting address
ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
ARM: 7950/1: mm: Fix stage-2 device memory attributes
ARM: dts: fix spdif pinmux configuration
The clk-phase property is used to represent the 2 clock phase values that is
needed for the SD/MMC driver. Add a prepare function to the clk_ops, that will
use the syscon driver to set sdmmc_clk's phase shift that is located in the
system manager.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
---
v9: none
v8: Use degrees in the clk-phase binding property
v7: Add dts property to represent the clk phase of the sdmmc_clk. Add a
prepare function to the gate clk that will toggle clock phase setting.
Remove the "altr,socfpga-sdmmc-sdr-clk" clock type.
v6: Add a new clock type "altr,socfpga-sdmmc-sdr-clk" that will be used to
set the phase shift settings.
v5: Use the "snps,dw-mshc" binding
v4: Use the sdmmc_clk prepare function to set the phase shift settings
v3: Not use the syscon driver because as of 3.13-rc1, the syscon driver is
loaded after the clock driver.
v2: Use the syscon driver
At late init all unused clocks are disabled. So clocks that were not
get before will be gated. In Keysone 2 SoC we have at least one
necessary clock that is not used by any driver - "msmcsram". This
clock is necessary, because it supplies the Multicore Shared Memory
Controller (MSMC). MSMC is the coherency interconnect and all the
coherent masters are connected to it including devices which are not
under Linux OS control. MSMC clock should not be touched even in low
power states.
So drop the clock node, otherwise 'clk_ignore_unused' parameter will
disable the clock leading to system stall.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Philipp Zabel