This driver is tested with two panels individually with Apq8016-IFC6309 board
https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc
1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24"
2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24"
- power off sequence in proper order
- put_unaligned_be16, put_unaligned_le32 macros used
- static function for mode_valid
- len initialized
- MODE_CLOCK_HIGH handled properly
- bus_formats handled in mode_valid
- GENMASK and FIELD_PREP used
- Kconfig proper indentation
- error handling endpoint data-lanes
- check for bus_formats unsupported
- display_timings naming local variables
- help modified
- ~vsdelay dynamic value set based on the
calculation of dsi speed, output speed, blanking
- panel->connector_type removed
- dual port implemented
- devm_drm_panel_bridge_add method used instead of panel
description modified
- regulator enable and disable with proper orders and delays
as per the spec
- removed drm_connector_status
- added bus_formats
- mdelay to usleep_range
- magic number to macros for CLRSI and mux registers
description modified
- replaced u32 instead of uint32_t
- updated alphabetic order of headers
- added SPDX identifier license
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com
- license modified to (GPL-2.0-only OR BSD-2-Clause)
- single-link and dual-link lvds description and
examples are added
- proper indentation
- VESA/JEIDA formats picked from panel-lvds dts
- dsi data-lanes property removed, it will be picked
from dsi0 ports
- dual-link lvds port added and implemented
- converted from .txt to .yaml
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-1-git-send-email-simhavcs@gmail.com
VKMS needs vblank interrupts enabled to capture CRC. When vblank is
disabled, tests like kms_cursor_crc and kms_pipe_crc_basic getting stuck
waiting for a capture that will not occur until vkms wakes up. This patch
adds a helper to set composer and ensure that vblank remains enabled as
long as the CRC capture is needed.
It clears the execution of the following kms_cursor_crc subtests:
1. pipe-A-cursor-[size,alpha-opaque, NxN-(on-screen, off-screen, sliding,
random, fast-moving])] - successful when running individually.
2. pipe-A-cursor-dpms passes again
3. pipe-A-cursor-suspend also passes
The issue was initially tracked in the sequential execution of IGT
kms_cursor_crc subtests: when running the test sequence or one of its
subtests twice, the odd execs complete and the pairs get stuck in an
endless wait. In the IGT code, calling a wait_for_vblank on preparing for
CRC capture prevented the busy-wait. But the problem persisted in the
pipe-A-cursor-dpms and -suspend subtests.
Checking the history, the pipe-A-cursor-dpms subtest was successful when,
in vkms_atomic_commit_tail, instead of using the flip_done op, it used
wait_for_vblanks. Another way to prevent blocking was wait_one_vblank when
enabling crtc. However, in both cases, pipe-A-cursor-suspend persisted
blocking in the 2nd start of CRC capture, which may indicate that
something got stuck in the step of CRC setup. Indeed, wait_one_vblank in
the crc setup was able to sync things and free all kms_cursor_crc
subtests. Besides, other alternatives to force enabling vblanks or prevent
disabling them such as calling drm_crtc_put_vblank or modeset_enables
before commit_planes + offdelay = 0, also unlock all subtests executions.
Finally, due to vkms's dependence on vblank interruptions to perform
tasks, this patch uses refcount to ensure that vblanks happen when
enabling composer and while crc capture is needed.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
v2:
- extract a vkms_set_composer helper
- fix vblank refcounting for the disabling case
v3:
- make the vkms_set_composer helper static
- review the credit tags
Co-debugged-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: add changelog back in]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200808120900.pudwwrfz44g3rqx7@smtp.gmail.com
These functions are now empty and no longer
useful so remove the functions and their uses.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bernard Zhao <bernard@vivo.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>,
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Icenowy Zheng <icenowy@aosc.io>,
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: dri-devel@lists.freedesktop.org,
Cc: linux-kernel@vger.kernel.org
Cc: opensource.kernel@vivo.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # Fixed build and a few warnings
Link: https://patchwork.freedesktop.org/patch/msgid/9e13761020750b1ce2f1fabee23ef6e2a2942882.camel@perches.com
When building imgag200 for the alpha architecture it fails like this:
mgag200_drv.c:233:9: error: implicit declaration of function ‘vmalloc’
233 | bios = vmalloc(size);
| ^~~~~~~
| kmalloc
When building for other architectures vmalloc.h is pulled in via some
other header file - for example asm-generic/io.h.
Use an explicit include of vmalloc.h to fix the build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: e20dfd27f7 ("drm/mgag200: Add support for G200 desktop cards")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Egbert Eich <eich@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807180547.GA923146@ravnborg.org
in panfrost_perfcnt_enable_locked, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200614063619.44944-1-navid.emamdoost@gmail.com
Some OPP tables specify voltage for each frequency. Devfreq can
handle these regulators but they should be get only 1 time to avoid
issue and know who is in charge.
If OPP table is probe don't init regulator.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-11-peron.clem@gmail.com
We will later introduce regulators managed by OPP.
Only alloc regulators when it's needed. This also help use
to release the regulators only when they are allocated.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-10-peron.clem@gmail.com
Later we will introduce devfreq probing regulator if they
are present. As regulator should be probe only one time we
need to get this logic in the device_init().
panfrost_device is already taking care of devfreq_resume()
and devfreq_suspend(), so it's not totally illogic to move
the devfreq_init() and devfreq_fini() here.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-9-peron.clem@gmail.com
Rename goto labels in device_init it will be easier to maintain.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-8-peron.clem@gmail.com
Introduce a boolean to know if opp table has been added.
With this, we can call panfrost_devfreq_fini() in case of error
and release what has been initialised.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-7-peron.clem@gmail.com
Convert busy_count to a simple int protected by spinlock.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-6-peron.clem@gmail.com
This use devfreq variable that will be lock with spinlock in future
patches. We should either introduce a function to access this one
but as devfreq is optional let's just remove it.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710095409.407087-4-peron.clem@gmail.com
Bifrost devices do support the flush reduction feature, so on first job
submit we were trying to read the register while still powered off.
If the GPU is powered off, the feature doesn't bring any benefit, so
don't try to read.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611085900.49740-1-tomeu.vizoso@collabora.com
We need to allocate that manually now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Link: https://patchwork.freedesktop.org/patch/384330/
This name better reflects what the object does. I didn't rename
all the pointers it seemed too messy.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-60-airlied@gmail.com
under driver control, this flag isn't needed anymore,
remove the API that used to access it, and consoldiate
with the used api.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-56-airlied@gmail.com
The driver now controls these, the core just controls the system
memory one.
v2: init sysman explicitly and assign it as a driver manager
to simplify the lookup sequence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-55-airlied@gmail.com
Drivers should all be cleaning up their memory managers
themselves now, so let the core just clean the system one up.
Remove the legacy cleaning interface.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-36-airlied@gmail.com
Vinay Simha BN