mirror of https://gitee.com/openkylin/linux.git
2343 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
527d147074 |
ARM: Device-tree updates for 4.15
We add device tree files for a couple of additional SoCs in various areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking,
Amlogic A113D for audio, and Renesas R-Car V3M for automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic
and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues that
the latest version of 'dtc' now warns about. Unfortunately there is still
a lot left to do.
A rework of the ARM foundation model introduced several new files
for common variations of the model.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TnSo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"We add device tree files for a couple of additional SoCs in various
areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
networking, Amlogic A113D for audio, and Renesas R-Car V3M for
automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
Amlogic and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues
that the latest version of 'dtc' now warns about. Unfortunately there
is still a lot left to do.
A rework of the ARM foundation model introduced several new files for
common variations of the model"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
dt-bindings: bus: Add documentation for the Technologic Systems NBUS
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
...
|
|
|
Masahiro Yamada
|
ba5b5034bd |
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
Commit
|
|
|
Linus Torvalds
|
1b6115fbe3 |
pci-v4.15-changes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=j4L3
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- detach driver before tearing down procfs/sysfs (Alex Williamson)
- disable PCIe services during shutdown (Sinan Kaya)
- fix ASPM oops on systems with no Root Ports (Ard Biesheuvel)
- fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas)
- fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas)
- fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn
Helgaas)
- report non-fatal AER errors only to the affected endpoint (Gabriele
Paoloni)
- distribute bus numbers, MMIO, and I/O space among hotplug bridges to
allow more devices to be hot-added (Mika Westerberg)
- fix pciehp races during initialization and surprise link down (Mika
Westerberg)
- handle surprise-removed devices in PME handling (Qiang)
- support resizable BARs for large graphics devices (Christian König)
- expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo
Sironi)
- create SR-IOV virtfn/physfn sysfs links before attaching driver
(Stuart Hayes)
- fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen)
- enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy)
- avoid slot reset if bridge itself is broken (Jan Glauber)
- clean up pci_reset_function() path (Jan H. Schönherr)
- make pci_map_rom() fail if the option ROM is invalid (Changbin Du)
- convert timers to timer_setup() (Kees Cook)
- move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap)
- constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal)
- remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master()
declarations (Bjorn Helgaas)
- fix endpoint framework overflows and BUG()s (Dan Carpenter)
- fix endpoint framework issues (Kishon Vijay Abraham I)
- avoid broken Cavium CN8xxx bus reset behavior (David Daney)
- extend Cavium ACS capability quirks (Vadim Lomovtsev)
- support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel)
- turn off dra7xx clocks cleanly on shutdown (Keerthy)
- fix Faraday probe error path (Wei Yongjun)
- support HiSilicon STB SoC PCIe host controller (Jianguo Sun)
- fix Hyper-V interrupt affinity issue (Dexuan Cui)
- remove useless ACPI warning for Hyper-V pass-through devices (Vitaly
Kuznetsov)
- support multiple MSI on iProc (Sandor Bodo-Merle)
- support Layerscape LS1012a and LS1046a PCIe host controllers (Hou
Zhiqiang)
- fix Layerscape default error response (Minghuan Lian)
- support MSI on Tango host controller (Marc Gonzalez)
- support Tegra186 PCIe host controller (Manikanta Maddireddy)
- use generic accessors on Tegra when possible (Thierry Reding)
- support V3 Semiconductor PCI host controller (Linus Walleij)
* tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits)
PCI/ASPM: Add L1 Substates definitions
PCI/ASPM: Reformat ASPM register definitions
PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD
PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time
PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe()
PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up()
PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up()
PCI: Fix kernel-doc build warning
PCI: Fail pci_map_rom() if the option ROM is invalid
PCI: Move pci_map_rom() error path
PCI: Move PCI_QUIRKS to the PCI bus menu
alpha/PCI: Make pdev_save_srm_config() static
PCI: Remove unused declarations
PCI: Remove redundant pci_dev, pci_bus, resource declarations
PCI: Remove redundant pcibios_set_master() declarations
PCI/PME: Handle invalid data when reading Root Status
PCI: hv: Use effective affinity mask
PCI: pciehp: Do not clear Presence Detect Changed during initialization
PCI: pciehp: Fix race condition handling surprise link down
PCI: Distribute available resources to hotplug-capable bridges
...
|
|
|
Linus Torvalds
|
37cb8e1f8e |
DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing memory
leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node. The
prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to dtb
compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage Technology,
shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
Opal Kelly, and Next Thing
-----BEGIN PGP SIGNATURE-----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=jgpN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
"A bigger diffstat than usual with the kbuild changes and a tree wide
fix in the binding documentation.
Summary:
- kbuild cleanups and improvements for dtbs
- Code clean-up of overlay code and fixing for some long standing
memory leak and race condition in applying overlays
- Improvements to DT memory usage making sysfs/kobjects optional and
skipping unflattening of disabled nodes. This is part of kernel
tinification efforts.
- Final piece of removing storing the full path for every DT node.
The prerequisite conversion of printk's to use device_node format
specifier happened in 4.14.
- Sync with current upstream dtc. This brings additional checks to
dtb compiling.
- Binding doc tree wide removal of leading 0s from examples
- RTC binding documentation adding missing devices and some
consolidation of duplicated bindings
- Vendor prefix documentation for nutsboard, Silicon Storage
Technology, shimafuji, Tecon Microprocessor Technologies, DH
electronics GmbH, Opal Kelly, and Next Thing"
* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: usb: add #phy-cells to usb-nop-xceiv
dt-bindings: Remove leading zeros from bindings notation
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
.gitignore: sort normal pattern rules alphabetically
dt-bindings: add vendor prefix for Next Thing Co.
scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
of: dynamic: fix memory leak related to properties of __of_node_dup
of: overlay: make pr_err() string unique
of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
of: overlay: remove unneeded check for NULL kbasename()
of: overlay: remove a dependency on device node full_name
of: overlay: simplify applying symbols from an overlay
of: overlay: avoid race condition between applying multiple overlays
of: overlay: loosen overly strict phandle clash check
of: overlay: expand check of whether overlay changeset can be removed
of: overlay: detect cases where device tree may become corrupt
of: overlay: minor restructuring
...
|
|
|
Linus Torvalds
|
dee02770cd |
MMC core:
- Introduce host claiming by context to support blkmq - Preparations for enabling CQE (eMMC CMDQ) requests - Re-factorizations to prepare for blkmq support - Re-factorizations to prepare for CQE support - Fix signal voltage switch for SD cards without power cycle - Convert RPMB to a character device - Export eMMC revision via sysfs - Support eMMC DT binding for fixed driver type - Document mmc_regulator_get_supply() API MMC host: - omap_hsmmc: Updated regulator management for PBIAS - sdhci-omap: Add new OMAP SDHCI driver - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs - sdhci-pci: Add support for Intel CDF - sdhci-acpi: Fix voltage switch for some Intel host controllers - sdhci-msm: Enable delay circuit calibration clocks - sdhci-msm: Manage power IRQ properly - mediatek: Add support of mt2701/mt2712 - mediatek: Updates management of clocks and tunings - mediatek: Upgrade eMMC HS400 support - rtsx_pci: Update tuning for gen3 PCI-Express - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings - Catch all errors when getting regulators - Various additional improvements and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJaCXiaAAoJEP4mhCVzWIwp+c4P/3UptZJJScU4WFS1zXH8h/YK mYQ4DOCZqQYihKV4ssbAAjmTkT3RdMkl+rq2s5+ZfVbsu57UqeHNaNXBQWirkXCo xBDzZlZFz42g4apKq+ZfmewZTM2fjed8Z7SrDcxPkkyU90QKa/LFFleAyxyXxXr1 ubKHJtev/oWBRxvzvWPYNUI5ExraxGxp2iGvavoYHNcggAgOSBJoKESvF7er5MRK Cx5cuKAESU2dJFQnebjndx3dFgQsZ18RTRXUom50oP3BXF2G3gIBMjxp9VfyuOGV xedyE2ALQxr1bxyWWejMdhhiZ+eNZNtiEJKqJ37ArTeBDyDfO/SDVXlkqkAARlYW rTzh9olfbuhFdCAo2gxAcCaQXnjgQzDDKnQJs++tQVziXGI9ezc44+A6fNh39nre yc/MLIjN96vWRhhFuTeFuENN+n7D2xyy+keXZXrALYYOCPAlKtip6DOgVl3ltNvx K1O7/STqdR4OHLK6vgdzi9ai3PmcmSBQwKCqqCH/7mcFm1xtBcxqdrEwORLQ3lCH c/tl4lJqJR2BD8U9gipjik0ovWb5p2KKAYhjqEY2qMy14OXs2509Y8GcqQRzqcQc FSAfUInooHfDEbUBVsLpTOjMvd6LAx34fTJ9QAanAZ1wdeV8C9DRz3kJh/L/mOmG N7/jyJnMV1Izknmpc2MP =3Gvx -----END PGP SIGNATURE----- Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Introduce host claiming by context to support blkmq - Preparations for enabling CQE (eMMC CMDQ) requests - Re-factorizations to prepare for blkmq support - Re-factorizations to prepare for CQE support - Fix signal voltage switch for SD cards without power cycle - Convert RPMB to a character device - Export eMMC revision via sysfs - Support eMMC DT binding for fixed driver type - Document mmc_regulator_get_supply() API MMC host: - omap_hsmmc: Updated regulator management for PBIAS - sdhci-omap: Add new OMAP SDHCI driver - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs - sdhci-pci: Add support for Intel CDF - sdhci-acpi: Fix voltage switch for some Intel host controllers - sdhci-msm: Enable delay circuit calibration clocks - sdhci-msm: Manage power IRQ properly - mediatek: Add support of mt2701/mt2712 - mediatek: Updates management of clocks and tunings - mediatek: Upgrade eMMC HS400 support - rtsx_pci: Update tuning for gen3 PCI-Express - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings - Catch all errors when getting regulators - Various additional improvements and cleanups" * tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits) sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute dt-bindings: sdhci-fujitsu: document cmd-dat-delay property mmc: tmio: Replace msleep() of 20ms or less with usleep_range() mmc: dw_mmc: Convert timers to use timer_setup() mmc: dw_mmc: Cleanup the DTO timer like the CTO one mmc: vub300: Use common code in __download_offload_pseudocode() mmc: tmio: Use common error handling code in tmio_mmc_host_probe() mmc: Convert timers to use timer_setup() mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers mmc: sdhci-acpi: Let devices define their own private data mmc: mediatek: perfer to use rise edge latching for cmd line mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: add latch-ck support mmc: mediatek: add support of source_cg clock mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add busy_check support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add pad_tune0 support mmc: mediatek: make hs400_tune_response only for mt8173 arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes ... |
|
|
Masahiro Yamada
|
7e7962dd1a |
kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Masahiro Yamada
|
74ce1896c6 |
kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Masahiro Yamada
|
10b62a2f78 |
.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Arnd Bergmann
|
1e11cbf720 |
Support for the RGA (raster graphics accelerator) on rk3399
and efuses on rk3368. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlnxjcYQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgQg9CACKoNn8LseipJa0kc6ZYXXtVDurmVHgaPyV OpC3+YbN9tpaBh6lsujkecthmlS45qrjZUsw00P50vcGbrMgrB9zytVrFrpEVxQT iNdEccU9RFEZ1GSQTPstxI3Uv1fnDcqSCplzKEeVxZ/U7vwWwq5YAi4bSey6eMzc GNq6FfT65Uf07a0Ondn3+IUzvjRpY42BHjjQjMv3k3lSn7z94/OG0AmCkRrXkBw/ 0+jxf9eMkkEj3JaC+OhwHOLJn7bv2U67HPGjLV7BLfFUQYGjPYd8g+LdeVV9Y2PJ urGiu3o/VbUbTbl2+TWh+OWYbfLFhpBdE+ouPHBPxJMPFkiGnrdA =xf8q -----END PGP SIGNATURE----- Merge tag 'v4.15-rockchip-dts64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts64 updates for 4.15 part2" from Heiko Stübner: Support for the RGA (raster graphics accelerator) on rk3399 and efuses on rk3368. * tag 'v4.15-rockchip-dts64-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add efuse for RK3368 SoCs arm64: dts: rockchip: add RGA device node for RK3399 clk: rockchip: add more rk3188 graphics clock ids clk: rockchip: add clock id for PCLK_EFUSE256 of RK3368 SoCs |
|
|
Arnd Bergmann
|
ea7cdc066e |
Allwinner arm64 changes, take 2
Reintroduction of the EMAC bindings that were reverted in 4.13. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaACruAAoJEBx+YmzsjxAgkK0QAL1BCHcrpftvznMta5QuuHrE fP++mGTv/upsnfGCb5D1gsQu+6bqyomrbCUjZspl7s+qrJSZo5Flto5KepPFNG4M vaFApl27HdUM4ppsOAVCokEp8r/QmRppc1CbDF0wqKL996ShUs71zwJ1yEZ5OwgR 1j5hcmEwUhHC6mpROeycYG9+cp040q8Mj01hA5ClfrlwITTqf2rZWF51MTtraUDK 3glww3ZCx9MdivqvlH8EKAKBaExIctoj9LZAcQZee+5yrKsXlOpzYwSO2qs4KxxA /5pdXitPp27jzzVB9w0oyYXb2ehixXHT6cYmTb4Ny9p+8xQo4V5qk++nMyY+kV2l 1FJlVCLR+I4eYgr6ekWFWanxnyGwcLNtOCggfvSVYrwjHGsBjyX7tOZM1zfHRWP+ W1DbWODow0So1b91Jfu63hyxkXawp2qA1+rMkrFnTHeXz3NRxdbTHP0SroXaWZd7 e06WGxNVH/7SBtozkfvMk8rt3loXW1Rghx+R7d2HmU9AjZBgnVErf9TUAwD7S/rV rlfAUeRPN9uO7tjbEXysBKqNgXGBFIHcWEaEgETePvWwadG1sA7+Y+Pt1mXinpV0 7SIE6JRzYgORXh7fii91gTlv0cr4VwfrxO+Ik0yMflfxgZ66FruwY8Q3Qjd2x8na 6yIpvwY9I57usi7RW8nQ =mDKb -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner arm64 changes, take 2" from Maxime Ripard: Reintroduction of the EMAC bindings that were reverted in 4.13. * tag 'sunxi-dt64-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio arm64: dts: allwinner: A64: Restore EMAC changes |
|
|
Arnd Bergmann
|
2cdc614b07 |
mvebu dt64 for 4.15 (part 2)
Add the extended UART support on Armada 3700 -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWgHNayMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71bHpAJ0QFOqPb3Et NHXbvRjusO7ZZ+B6+wCff8at95p9E8X5ULnGpR7qINZHKh8= =CdWu -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-4.15-2' of git://git.infradead.org/linux-mvebu into next/dt Pull "mvebu dt64 for 4.15 (part 2)" from Gregory CLEMENT: Add the extended UART support on Armada 3700 * tag 'mvebu-dt64-4.15-2' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: armada-3720-espressobin: fill UART nodes arm64: dts: marvell: armada-3720-db: enable second UART port arm64: dts: marvell: armada-37xx: add second UART port arm64: dts: marvell: armada-37xx: add UART clock |
|
|
Arnd Bergmann
|
0b30cf2fb4 |
Allwinner DT changes for 4.15, take 2
Two long awaited changes:
- Reintroduction of the new EMAC DT bindings that got reverted at the
last minute in 4.13
- Introduction of the AXP803/813 PMIC support
-----BEGIN PGP SIGNATURE-----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=96rw
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard:
Here are a few commits that would be great to get in 4.15, given how
long they've been hanging around.
The first and most important one is the reintroduction of the EMAC DT
changes after they've been reverted at the last minute in 4.13.
There's a arm64 patch that crept in because the H5 and H3 share a
common DTSI that is located in arch/arm, and merging that patch
through the arm64 PR, especially given the pull requests that have
already been sent, would just have generated too many conflicts.
* tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
ARM: dts: sunxi: Restore EMAC changes (boards)
ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac
arm: dts: sunxi: h3/h5: Restore EMAC changes
dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
dt-bindings: net: Restore sun8i dwmac binding
|
|
|
Arnd Bergmann
|
2d2cf5283f |
Realtek ARM64 based SoC DT for v4.15
This refactors the RTD1295 DT, preparing for (but not yet adding) RTD1293 and RTD1296. Superfluous reg property entries are dropped. DTs for PROBOX2 AVA and MeLE V9 TV boxes are added. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZ/aV5AAoJEPou0S0+fgE/NoMQALWahjJ7zU5xB5mrdW1L2qfz Nb1K7dY9PJyVvwReY50U8OLJ0UOkQsmzQ2zK6aKqiiGSfeOjVknwJTbZZZ8/tKY2 0kkkN2TWX5aTodSm0S0NZkfY/+Me6ttlRabdEP06VE3BdyBY5FjThgYGZcXtArQB BMgKyh3ge/imn7AOLbPoi0ByExRfAX80TCHjOIFLXt3zx5OYpHU5XVrepT/Vej/J G+1OXsypgOJRByA8vuKlg1k9dKDLIScHoqyKZwiORJ6JVlXjb/AxO5ThzKR/WK0L 4zAtfkZWZxom5nmUtpiLOnYLVm9SViEa9ncU0HoyMLFwsxrxtkZvKNdsARllAER0 dJO1agWHUn1otdb9egJPB07h/LUsgJWYGxeq5LKpq+MUqpPa1QBhkHVz4F63obni D6VQm3PthxCW/jRD0fj0HVMVKieJO5oUtGTlHLnShjsGCzA73VI9jqDxkO3HFRot bvoPAHLtRXCF+0LQ5OYrNN5yG8aDN68EgltmgZp+nF8dXahaHmn8KKeh1GOHAfXX 8v9h52FxWcU2QWgOvIoORK3ohKey5V6L/fy6++rAwnTTQ6pV2RW2L2xRin5poXBM 5hpolazCpragl0kKCOakZ/WHcUIP61pixGMPz362ipFZw8nTNZW3DcQ7AgFtenH6 TcG1dWHJhWo47Mwk50tP =8sRS -----END PGP SIGNATURE----- Merge tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into next/dt Pull "Realtek ARM64 based SoC DT for v4.15" from Andreas Färber: This refactors the RTD1295 DT, preparing for (but not yet adding) RTD1293 and RTD1296. Superfluous reg property entries are dropped. DTs for PROBOX2 AVA and MeLE V9 TV boxes are added. * tag 'realtek-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: dts: realtek: Add MeLE V9 dt-bindings: arm: realtek: Document MeLE V9 dt-bindings: Add vendor prefix for MeLE arm64: dts: realtek: Factor out common RTD129x parts arm64: dts: realtek: Add ProBox2 Ava dt-bindings: arm: realtek: Add ProBox2 AVA dt-bindings: Add vendor prefix for ProBox2 arm64: dts: realtek: Clean up RTD1295 UART reg property |
|
|
Arnd Bergmann
|
3ab6dd0416 |
Actions Semi ARM64 based SoC DT for v4.15
This updates the Bubblegum-96 DT with a clock node for the debug UART. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZ/ZW8AAoJEPou0S0+fgE/6SIP/1RTgErTZWuNJR8IQjlAqvzm Ni+UR2N31ra6+akx/WhhWUbozwbiFDwMHqNoDW4s4fi7sXsWvEE/18BqlGpYanIh XDs+QvJ0oQ0RVA5F+KqzXhf04o0XaW5Vpkf07a/2X6ZlBWtSQtoKbeNwlvvKRpaq VAuRcRzIKJ1Ys70XtYQ3+xFTDT0E2hbjNIvIQHWWEslWXzpWq8q58hg/bq+VXHTM e13XJ8NBafGdnhLhKU+5zh7OjPZ1bumZHk42aFWzG40wPqwYHcomNmrAmOcjza4N Tk1E0YYb8sutLJlGDGw9T2abFTMwJue7vlxRAjecmNA09YPJOzANfSSzQ4t02t4a M4Oi2qS/om3J6ARTTrwkfLWwMSxk/NT/QMl1YsE3dXhVdeLacRq+Ef3uTi44Jm0D IrTd6CGF4g7vedJjd7BVExcwymSRIrqAjxFRZZUyImfZ0UQIMWkwaxVTetdEV0AM WgfUS/3mVOGMDEP/BXhzd4VYb058JzyNo4CiBL3Bzn37Ng5SSQKFLLJzI7rhzacq WiywgywlV/dx2MEvxrpiWSEnIGAUlNEO0bvwyq2PYkq7zfhrK/nUAp9OqwUvv8gq wk5gsbNMuMx4UoVpRZeIDM54uwdIMvDSQb64ynWRDZkkg5pi34wyeXcMbsRkkUCe MVv0Dl+lVg7FyYyIRAnx =5o4s -----END PGP SIGNATURE----- Merge tag 'actions-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM64 based SoC DT for v4.15" from Andreas Färber: This updates the Bubblegum-96 DT with a clock node for the debug UART. * tag 'actions-arm64-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock |
|
|
Linus Torvalds
|
b1878b857c |
ARM: SoC fixes for 4.14
Only two patches came in over the last two weeks: Uniphier USB support needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a Marvell MVEBU stability issue has been fixed. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWfz7gGCrR//JCVInAQLpeQ//SI+l8egWQCpBVF57oW3Y+PdNcYvAmfqv h4fPl6if0VXYKPdGoiIOLO5uk+SL2MxoX46dSmqOVnBVj7CvHZzmlCjvVk8UKzJI svfU3x1YwHdFf+brIoQxrdCI3iVV/6LgtHgjF2jxxatHqLpnjQRqLmY/kTV99I19 IXSTBS49H0X4QaXt+l6AUdn5f/fauX0cN8EIh3e8bPIBHZWkrXEbJb7Zx0tGMtlz jKb0vw4RTms7BS7R5iZIvUzD5WvgRXEMeiTVbBXlB7Tp6Pet4+zdP98J3TBO7GYD Dq/vhj2rLw6C2sbmLNCdghWi7urZIuWWdJAEDU6hijvoDqidGUjtmSobGToW8B5n rb42NbfeOleDzFCXN+0mjE2dH/coqe3FPfG3MkppdLc8AM70wvYMpguAAkGWp+DI FTJvqybrPZ0/YCy9x5UDRe4VsBp015lUdRzZx/kfZ0olvE12wuLRiQ4+d26nHrry Y08EKY8pYJ9BMVTWYqB4XVaP5axuDa4tLr+hsuHEwW21fziyZ/IvkYTbwfmmxxCG bF9alE/H5bp20I8j3taZUhpdAg4f/Cl+sZBHMPfyo+oeQ2Dmx1XOtk9nXqcvroa3 8ls9BK1ySJSAREpIADPa8OESeSWOHuGDmbzcw0KtVVcraeLfEl1m1L+zHqPsHPjB Ii+uUzsmg0M= =pn9T -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Only two patches came in over the last two weeks: Uniphier USB support needs additional clocks enabled (on both 32-bit and 64-bit ARM), and a Marvell MVEBU stability issue has been fixed" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: mvebu: pl310-cache disable double-linefill arm64: dts: uniphier: add STDMAC clock to EHCI nodes ARM: dts: uniphier: add STDMAC clock to EHCI nodes |
|
|
Andreas Färber
|
965f94c775 |
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
Give the serial driver a fixed-clock as input for baudrate 115200. Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Arnd Bergmann
|
d29d30782a |
SoCFPGA DTS updates for v4.15, part 2
- Stratix10 platform update - Enable GPIO and LEDs for Stratix10 devkit -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZ9zkrAAoJEBmUBAuBoyj0uMQQALJ5ZKHHs6SXmMEM9/n1wQ9W LPiISwxPLTRsMNkxgLkwUH/crhkFQB5Udp+ntXNPEzoLG6eYrx7Tkr2oy09QxUbr N//HNoUutgNM/OelUpVhjEpCW8E3jbF7DiuNsfQshx6oIu7kxmGDpELcPErvqo3f ISYcScISnrETYgX+V5URUgoF7tRZllfPKirpttj5asESgaPcTg0w5eyCY4EDepWL W2Kpwb23OxmSL9jCXAmyT0wTKN1B/pUJi8teguqBE470GWr4KC0CS7BD945AM9DD Po9m2My4XrNe4I6WeV1l23xFi9s7jT31AgaYISpAZheeDJFmMmRjGZcf6MzMFPl7 i/LqteQsty+L2G6mUjTP3uExChIp98V2CB8x6P4HJADv7zeV2fAUMTdZ/oVUB8H8 6tti1JDsVstn63aEdqjyGE08LyseNznAVguTm7bf5c217eUegdsYyVFAD+QXiVkD jhW0o+AEzT4+oQuFRL0epGO1a97RNx7NBeCQEWgdEFU9wV/9v0kEpU2Senu81y5v 8BF9T0X+OM0+REcqMNEH3VpA5IFEH2RUnETobS/SQ/7MtZqYKxe6Y1PjEGkBb/T1 GgMpDlCZQ5zSf4yFhaRIW1cl64Rp7in/2J4/oFXr8FFsOJajT4+65rLKP7F2REsq CPaTYjukDCfgV5cOZZbG =GhNJ -----END PGP SIGNATURE----- Merge tag 'socfpga_dts_for_v4.15_part2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Pull "SoCFPGA DTS updates for v4.15, part 2" from Dinh Nguyen: - Stratix10 platform update - Enable GPIO and LEDs for Stratix10 devkit * tag 'socfpga_dts_for_v4.15_part2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix interrupt number for gpio1 arm64: dts: stratix10: enable gpio and leds arm64: dts: stratix10: add gpio header |
|
|
Chaotian Jing
|
689362b3c9 |
arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
devicetree bindings has been updated to support multi-platforms, so that each platform has its owns compatible name. And, this compatible name may used in driver to distinguish with other platform. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Corentin Labbe
|
44a94c7ef9 |
arm64: dts: allwinner: H5: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for H5
This reverts a part of commit
|
|
|
Corentin Labbe
|
16416084e0 |
arm64: dts: allwinner: add snps,dwmac-mdio compatible to emac/mdio
stmmac bindings docs said that its mdio node must have compatible = "snps,dwmac-mdio"; Since dwmac-sun8i does not have any good reasons to not doing it, all their MDIO node must have it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
|
|
Corentin Labbe
|
94f4428867 |
arm64: dts: allwinner: A64: Restore EMAC changes
The original dwmac-sun8i DT bindings have some issue on how to handle
integrated PHY and was reverted in last RC of 4.13.
But now we have a solution so we need to get back that was reverted.
This patch restore arm64 DT about dwmac-sun8i for A64
This reverts commit
|
|
|
Miquel Raynal
|
c3c08c5d32 |
arm64: dts: marvell: armada-3720-espressobin: fill UART nodes
Fill ESPRESSObin uart0 node with pinctrl information like in the Armada-3720-DB device tree (which uses the same node). Also explain how to enable the second UART port available on the headers. This second port is not enabled by default because both headers are dedicated to expose general purpose pins and remapping some of them to use the second UART would break existing users. Suggested-by: László ÁSHIN <laszlo@ashin.hu> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Miquel Raynal
|
71e278ce81 |
arm64: dts: marvell: armada-3720-db: enable second UART port
Enable Armada-3720-DB second UART port by adding the corresponding device tree node in the board DTS and enabling it. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Miquel Raynal
|
7c48dc201b |
arm64: dts: marvell: armada-37xx: add second UART port
Add a node in Armada 37xx DTSI file for the second UART, with a different compatible due to its extended IP which has some differences with the first UART already in place. Make use of this commit to also fully describe the first port and use the same clear and named interrupt bindings for both ports. The standard UART (UART0) uses level-interrupts while the extended UART (UART1) uses edge-triggered interrupts. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Miquel Raynal
|
2ff0d0b5bb |
arm64: dts: marvell: armada-37xx: add UART clock
Add the missing clock property to armada-3700 UART node. This clock will be used to derive the prescaler value to comply with the requested baudrate. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Arnd Bergmann
|
18ea0db308 |
Amlogic 64-bit DT updates for v4.15, round 2
- add support for new GPIO IRQ driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAln2BpMACgkQWTcYmtP7 xmV5og//YkRwzS21agdQu3ZYCh/VP5i1CUhXZkp520DSLeY60LZfQNnz1lFvFHjN baSW2Gypy9rBjcRr4efl79Qb8v10JvLytUt7LYLHCFaU/u5AeEPFNLc0E4JzKtIB n8x99sqoY0NsVBfN4yVLqNmQjUZw87+I0nit/BcOAoHdOTnxtK1GBgcVF3ovRwet T/opxgKQeR2rp1NS5kjye9NYt/HK9WCE9e3eoO+h0OjLtlVu9b2M2/XYz2yMKlmj T09SWZx9gmqF47B3mXb0/f5KUaYNnnoxVGx8F55oVQhtWZcTt9G67CvBnAdU26Lm ftw0uwOF1Rjc4heybJkePm4k5pJTtXtgmCoEQl79/L1v+dvC1d+oPPvExd7Zp5rU qiT5SKOIeCP7Bclzbn01mszMFefxmtJe2zyrbwjL/Ntvo/1DlifI70Rjde7rY+Mw pWtgONhRjr8Q5XvFXNKVXqeDlLBM8Qv+YOqZ2weMqdBDsbr1LFIeCZOhRNu3O1qR bNQ+soVfuHL7ei6lks+cbBApNRDN+J0YIx2Y6alJ/0kjpI2aNWvGPfgdmPq5w4Uw rOIRgm19Et5loHbdI60A1VfKNlu+WkrSkESj4h6bQ2pwt1tWso7RrlpfCXROcCbm 2JicBHIe1665E+FCRZOCPXdPx73SRBIPCVbNL3T1oomaf3prqrE= =vVV3 -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.15, round 2" from Kevin Hilman: - add support for new GPIO IRQ driver * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: add external PHY interrupt on some platforms ARM64: dts: meson-gx: add gpio interrupt controller ARM64: meson: enable MESON_IRQ_GPIO in Kconfig ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply |
|
|
Arnd Bergmann
|
e45cba78c6 |
Freescale arm64 device tree updates for 4.15:
- Add GICv3 ITS node and PCIe devcies for LS1088A support.
- Enable PCIe support for LS2088A SoC.
- Add OP-TEE support for various Layerscape SoCs, LS1012A, LS1043A,
LS1046A, LS1088A and LS208XA.
- Update DPAA QBMan nodes to use constant defines in the interrupt
description.
- Add DSPI device to support SPI-NOR on LS1012A based boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ7y0kAAoJEFBXWFqHsHzOE70H/iAI1WmTWW1kuc2d7w1pCZrP
m3aBdavPb6N2XT43HUDo5yuAVl84AvmoHWkOXeiAEgSTwuGCMcAT90P3v+MJQG5P
xFCuqEAYfKb4BwMNs3oBbgdWBErxOpqFGd58vvXbEHzGv6DCnJRD6euhVNMosTKv
QI62vZkbD3sR1aUcC/dLG0hCFRb7+fscL+sgtU0vnF5nWKQLXQ/eGCDhhh4mmY/5
sjgeCqhYeIBrhpoOLm8qK9CkRnf7nPZwSiTFhG1o0nHDqbmzTRU5zQrAEDGB9Ukg
pWDtHyIEkrmnzOucIbKVpFue7IldkR7WN2rslpkHhtDaK1gIYnhjO26toU7/f2U=
=T0d9
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "Freescale arm64 device tree updates for 4.15" from Shawn Guo:
- Add GICv3 ITS node and PCIe devcies for LS1088A support.
- Enable PCIe support for LS2088A SoC.
- Add OP-TEE support for various Layerscape SoCs, LS1012A, LS1043A,
LS1046A, LS1088A and LS208XA.
- Update DPAA QBMan nodes to use constant defines in the interrupt
description.
- Add DSPI device to support SPI-NOR on LS1012A based boards.
* tag 'imx-dt64-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: update the DPAA QBMan nodes
arm64: dts: ls1088a: add PCIe controller DT nodes
arm64: dts: ls1088a: add gicv3 ITS DT node
arm64: dts: ls2088a: add pcie support
arm64: dts: ls: Add optee node
dt-bindings: mtd: add sst25wf040b and en25s64 to sip-nor list
dt-bindings: spi: Add fsl,ls1012a-dspi compatible string
arm64: dts: ls1012a: add the DTS node for DSPI support
|
|
|
Arnd Bergmann
|
25b8384898 |
- mt2712: add cpuidle support
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAlns4G8XHG1hdHRoaWFz LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Mv1BAAq9iFGeVlSTia9VXbd8v4/BQW KGxGNt7UNMmk8tlLDNSO4pG4ACkVVTL50t+PNYOCTi7+aTbbeBi6/zXBXvWdwZ1d XRmuLwuibpr+ozskVfpV6Ussr0jSV2J3z0DsGIyWBCjlVIqUQM/QZ/4E2P6D8aJn NmwI1vx9FV3VQXKMwYuiXmRrSUvJDB26arjl4ryJPLA7OV6K7rS++4U7i88LZLe7 iIZ/6jqoNqJAnJVgowjVbCADr5yzlGp7q3CD0n0Y3QhMBg8ShVtMAd2NqNU5rFXJ vPMIKJccAzxtGieIgBAZjhpm8hQUZFhaEggx5BdQXQriZwK7t56mtaQy4TdhRZwu 6BT9+9aH1TIpvC7OQtP2Tfg1UHqCfJUMPDAnHyeqUg737aNaiv5VRQkPLjtUZ84B 6+1zNiZisX0bGD/VW1mxzzssgxbiYetSKX0KiNcHKa84osMwF94BLdCoaMz6VbMT i5acAUlhWTI8DHBqGa6kCde97A5LCJiLc5q6B5Ig3CaY48MqIC4vr3CAoOg2YpBZ 6PsUsgb1PhpkNXheMB7jwyMG6wr7xE0qLSurcXfR2zbOg9GTB0FD8Sf1DGrholv+ d92nLvyfIWY3y+CwKQtsIkMtQYH4da+izUsEeMmBH9ChyDimE7S3j5dyBaU7XemO KvlYHlWjiWThTz7gHAU= =D5oL -----END PGP SIGNATURE----- Merge tag 'v4.14-next-dts64' of https://github.com/mbgg/linux-mediatek into next/dt Pull "Mediatek: 64-bit DT update for v4.15" from Matthias Brugger: - mt2712: add cpuidle support * tag 'v4.14-next-dts64' of https://github.com/mbgg/linux-mediatek: arm64: dts: mediatek: Add cpuidle support for MT2712 |
|
|
Arnd Bergmann
|
a5494aed0d |
Amlogic 64-bit platforms: DT updates for v4.15
- new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlnsbzwACgkQWTcYmtP7 xmWwSw/+LBr7iNv9ugxgfShcd8ugecjJm7eBMD9zKMJaHw+1AUxhexZsCyUQVjDy UjAeTTMsugTzIEvQoSI97h82K3uE7/3zqU+UaWziWILegb8b9VnYVzjHUoodNE9Z /9gbIb7P55rlJ1BN0zzXcsvEjvC7TrfklgXBfIBK0Ob2zqDHGpiWOFnrQiuZNweA tgSemkT4ELZYAksXszFhU1o87QW5IRqXwNX5ech7p3UpUTdDnY1MPNbLRRh9tVWi G7EtLJfbSPEHczBBtfcxQkagpk2TjVStMpYgrAaa3eMG5Ervdh3QrdGp8B7bObPY rZgYAU1x7q3PBWm07IpnlnprMC3RHP7wdirXVKMNW1DbYqRBoyGeTc9pF+DgiMNP wcxsbQgotSZbeke6ODPaP2xEtIqWCgTee/4P6zjOYfsXxphtVkdfLGvICwpximUj CqbXZSsn+pg4g1IsGU3EcVLbFzq2A+uv5hkV18b9ouDIN0mm7+/mpyaLeQ8wrl2U 5f+dCbrU4ypYosnOQIZKla8kHwutWmur6a9+VBPSEVWMXzdUUmBUicxgUYi5DMLZ SLXBklAZ74YqnFNZvrNaLvaD2GR5COU8NpW9S3PBxsUqXa57jMUAAOzbeLLvRB87 57S3pR7f+thG93pe8JFfP/ciVcnAGn9oQkV5LU8k6lTd7gaxtEw= =bJwM -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc |
|
|
Arnd Bergmann
|
b295477e00 |
mvebu dt64 for 4.15 (part 1)
On Armada 7K/8k: - Improve network support at SoC and board level - Enable watchdog - Add UART muxing - On 7040 DB: add CD SDIO and NAND support - On 8040 DB: add PCIE more ports and SPI1 On Armada 37xx: - Fix UART register size - Add vmmc regulator for SD on 3720 DB -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWeoPnCMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71eWeAJ4yqhFToGh9 bLvyANmN33Lp0kYfEwCeKTJv715mvxAfJMYUMX7CUmgEAOs= =9sls -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-4.15-1' of git://git.infradead.org/linux-mvebu into next/dt Pull "mvebu dt64 for 4.15 (part 1)" from Gregory CLEMENT: On Armada 7K/8k: - Improve network support at SoC and board level - Enable watchdog - Add UART muxing - On 7040 DB: add CD SDIO and NAND support - On 8040 DB: add PCIE more ports and SPI1 On Armada 37xx: - Fix UART register size - Add vmmc regulator for SD on 3720 DB * tag 'mvebu-dt64-4.15-1' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP arm64: dts: marvell: 7040-db: Document the gpio expander arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB arm64: dts: marvell: add NAND support on the 7040-DB board arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1 arm64: dts: marvell: 8040-db: enable the SFP ports arm64: dts: marvell: 7040-db: enable the SFP port arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port arm64: dts: marvell: mcbin: add comphy references to Ethernet ports arm64: dts: marvell: 37xx: remove empty line arm64: dts: marvell: cp110: add PPv2 port interrupts arm64: dts: marvell: add comphy nodes on cp110 master and slave arm64: dts: marvell: extend the cp110 syscon register area length arm64: dts: marvell: enable AP806 watchdog arm64: dts: marvell: Fix A37xx UART0 register size arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot arm64: dts: marvell: add UART muxing on Armada 7K/8K |
|
|
Arnd Bergmann
|
a2c614a7db |
arm64: tegra: Device tree changes for v4.15-rc1
Enables host1x, VIC, PCIe and the BPMP thermal sensor on Tegra186. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlnp4kkTHHRyZWRpbmdA bnZpZGlhLmNvbQAKCRDdI6zXfz6zoRzED/0UbIFfK3R8EreqoPDdxqBZN471PcMo zAiYoSZ3WOHhbsexhpgJRUiHUpW4C0RnguG6x1QXN5Gt0EuIy4ydeYjLX6r1jcZi 74ZxGgHvOipCj83CspGV0oGcys4c3A/KpSLBH/+7oy9YUXQ/xo2g9kj0941wP22a 4kCiVOSjEXOP7m25GJ4MistFqkIOdkEEWBUGghsCxYFoZEGngKgG0PKEhb4ta/BQ i8i6h9NmzF1LyAA2Vka3mn3XmvF+EM58L4eUt3deNlMqW/mIc5wcXJwzXKFbyTxp c7V2V0EcU2sANg6/MjAf33VQLg5TkM04REJE7MBZ+FrTLxSn1hA4unLoeWN5Q6Hf pRmjvQhH49Dl3rX2cNMGGAHfK4oRsWjfX5dlNBA1ub0HlBlClNRRf87A4rkg12tx RIdFGF9B8sjddAUItXdPLzfNqaLkfk9fePS2bRfqChMlPYvPynQrUe3sVKhkjPDm O8NevnC+eYYeNWNKRp4RM19RW5/McZup03LQLN62BehQlUxb3Tpe3EIJOdbHdMYb 5m5cSj9YERk8boS1LOUG3orN/LAAR/G1uU2T12w7+PN8xagN+Uic6JMMF34/87j+ LdYGEaWV/6tr8J1ull6wFTlsNPmuGJ8IxS5y6o5qn9oZOXK2UVoymluC5kFkx+hB oEcNdBIxSM679Q== =AvTC -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Device tree changes for v4.15-rc1" from Thierry Reding: Enables host1x, VIC, PCIe and the BPMP thermal sensor on Tegra186. * tag 'tegra-for-4.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add BPMP thermal sensor to Tegra186 arm64: tegra: Enable PCIe on Jetson TX2 arm64: tegra: Add PCIe node for Tegra186 arm64: tegra: Add VIC on Tegra186 arm64: tegra: Add host1x on Tegra186 arm64: tegra: Add #power-domain-cells for BPMP |
|
|
Arnd Bergmann
|
918c822374 |
Second Round of Renesas ARM64 Based SoC DT Updates for v4.15
* r8a7795 (H3) and r8a7796 (M3-W) SoCs
- Use R-Car Gen 3 fallback compat string for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
* r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
- Add dr_mode property for USB2.0 channel 0
Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
(CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Using dual-role channel (or not) is related to the type of USB receptor
on board specification. So, I added the property into the
salvator-common.dtsi."
- Add pfc node for USB3.0 channel 0
Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
USB3.0 channel 0, the USB3.0 host controller works without this setting
on the kernel. But, this setting should have salvator-common.dtsi. So,
this patch adds the pfc node for USB3.0 channel 0."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
- Correct audio_clkout
Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
"audio_clkout" should be same value."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
r8a77995 (D3) Draak boards
- Drop "avb_phy_int" from avb_pins
Shimoda-san says "Since the Ethernet AVB driver doesn't support
AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
pin, this patch removes the "avb_phy_int" from the avb_pins node."
* r8a77995 (D3) Draak board
- Enable PWM channels
Shimoda-san says "Each channel connects to LTC2644 for brightness
control."
* r8a77970 (V3M) Eagle and ULCB Kingfisher boards
- Add initial device tree support
-----BEGIN PGP SIGNATURE-----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=BmC8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman:
* r8a7795 (H3) and r8a7796 (M3-W) SoCs
- Use R-Car Gen 3 fallback compat string for GPIO
Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback
compat strings in peace of now deprecated non-generation specific R-Car
GPIO fallback compat string in the DT of Renesas ARM and arm64 based
SoCs.
* r8a7795 (H3) and r8a7796 (M3-W) Salvator boards
- Add dr_mode property for USB2.0 channel 0
Shimoda-san says "Since Salvator-X[S] have a USB2.0 dual-role channel
(CN9), this patch
adds dr_mode property for USB2.0 channel 0 (EHCI/OHCI and HS-USB)
as "otg".
Using dual-role channel (or not) is related to the type of USB receptor
on board specification. So, I added the property into the
salvator-common.dtsi."
- Add pfc node for USB3.0 channel 0
Shimoda-san says "Since a R-Car Gen3 bootloader enables the PFC of
USB3.0 channel 0, the USB3.0 host controller works without this setting
on the kernel. But, this setting should have salvator-common.dtsi. So,
this patch adds the pfc node for USB3.0 channel 0."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB boards
- Correct audio_clkout
Morimoto-san says ""audio_clkout" is dummy clock of <&rcar_sound 0> to
avoid clock loop which invites probe conflct. Thus <&rcar_sound 0> and
"audio_clkout" should be same value."
* r8a7795 (H3) and r8a7796 (M3-W) Salvator and ULCB, and
r8a77995 (D3) Draak boards
- Drop "avb_phy_int" from avb_pins
Shimoda-san says "Since the Ethernet AVB driver doesn't support
AVB_PHY_INT handling and it will be handled by a phy driver as a gpio
pin, this patch removes the "avb_phy_int" from the avb_pins node."
* r8a77995 (D3) Draak board
- Enable PWM channels
Shimoda-san says "Each channel connects to LTC2644 for brightness
control."
* r8a77970 (V3M) Eagle and ULCB Kingfisher boards
- Add initial device tree support
* tag 'renesas-arm64-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
arm64: dts: renesas: salvator-common: add dr_mode property for USB2.0 channel 0
arm64: dts: r8a7796: Use R-Car GPIO Gen3 fallback compat string
arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat string
arm64: renesas: ulcb: fixup audio_clkout
arm64: renesas: salvator-common: fixup audio_clkout
arm64: dts: renesas: eagle: add EtherAVB support
arm64: dts: r8a77995: Add INTC-EX device node
arm64: dts: r8a77970: Add INTC-EX device node
arm64: dts: r8a7796: Add INTC-EX device node
arm64: dts: ulcb-kf: hog USB3 hub control gpios
arm64: dts: ulcb-kf: enable PCA9548 on I2C4
arm64: dts: ulcb-kf: enable PCA9548 on I2C2
arm64: dts: ulcb-kf: enable TCA9539 on I2C4
arm64: dts: ulcb-kf: enable TCA9539 on I2C2
arm64: dts: ulcb-kf: enable USB3.0 Host
arm64: dts: ulcb-kf: enable PCIE0/1
arm64: dts: ulcb-kf: enable USB2.0 Host channel 0
arm64: dts: ulcb-kf: enable HSUSB
arm64: dts: ulcb-kf: enable CAN0/1
arm64: dts: ulcb-kf: enable SCIF1
...
|
|
|
Arnd Bergmann
|
11c3889c23 |
UniPhier ARM64 SoC DT updates for v4.15
- add thermal monitor and thermal zone nodes - add efuse nodes - fix W=2 warnings - add GPIO controller nodes and related properties - add resets properties -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZ7idoAAoJED2LAQed4NsG9HsQAKbgS6BqmEi7l6dg8Iz++DPE OkICvN5EPMh0NFujlqfGswmawXgZv1MsvQphFyJ9+a2FC1wC7p8AUqiNmEiXt208 +ogVs1LVHDJwMyJcP1iL1eGJClMOdX9hQ11qQfSlpKFqN6xy67okigahSEMGRveU Bydncrih9/zxepv9pCENjE6wuOO73DpxyKsGooVgCeTKtQfSMpT9OhRqMXsC8e3i OswsCPii3JtlYEN6EsBj/zkE349mUwkThA+JEZ0nxzgrMir7+6pDJwfu/Dx4F+Z4 wupplnHAd4/WzAbySb1VBKiLcFhqf0tcdLLmlqS2zNg4s712BDlS22tsurDvpvLt lNPZP+/bxcctgug+4pPy5ogilUzExotd+stHUq9G7zCZKAnK50NNdQDb4uAwbc/l 7yAgOXXIldP523cX3xTMC6x5k4yJD6icCwtOEKyiUqI3hJUo1BlFS1tzlTic+iOx CDyNwBGH5vECCHiJyIQHH5HOQ5dvBuArGgnSWdWqFFdYzsIEKnC9UT+VnHJh9giA XeyLj/PMnamsso5j1oKhIuxGLho4ap5w4J99QS7ImBD9LJrIaSFrEY7MzNGref9j AdxMKPdkZmJg7Jq2hiwcF/5PF+84rUccu9ESrZ/sure2o8XGu72Bpn6pK25HQERI 7EROd1eaKQhdUCn0zKXj =YY9L -----END PGP SIGNATURE----- Merge tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt Pull "UniPhier ARM64 SoC DT updates for v4.15" from Masahiro Yamada: - add thermal monitor and thermal zone nodes - add efuse nodes - fix W=2 warnings - add GPIO controller nodes and related properties - add resets properties * tag 'uniphier-dt64-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add resets properties arm64: dts: uniphier: add eMMC hardware reset provider node arm64: dts: uniphier: add GPIO hog definition arm64: dts: uniphier: route on-board device IRQ to GPIO controller arm64: dts: uniphier: add GPIO controller nodes arm64: dts: uniphier: fix W=2 build warnings arm64: dts: uniphier: enable NAND for PXs3 reference board arm64: dts: uniphier: add efuse node for LD11, LD20, and PXs3 arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 |
|
|
Arnd Bergmann
|
add5c42e99 |
Allwinner arm64 DT changes for 4.15
Most notable changes: - SPI and DMA support on the a64 - New boards: NanoPi NEO Plus2 -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZ6a4VAAoJEBx+YmzsjxAgnL0P/1KkOUnEuo0sW56x9S5BTLob tc8HjJtismgCAISKIQmtFSrPQ4LhP2QRSce7a1sqOAp5TXOzKazXo8UJ4Peg7zkQ 91aqwOn0Bv3azelzzSnTnfLxJBSOuBBu+DfmoEp7nJsnFcon7xzDeRPSVE+r4bDH nAygZJq+d9rJogsWA9x20GR+3HsGShPo2GHXWDDP23eCDSA7EzguaJJq2bp58kQV lp/naY6BUCQ6svXdM1yoVtx6YbHMMzuV+ltZ8ZnryGtT3Dqm2y+tYGuQ2iBHhCz6 IWC9pyaVd62exoOr827M+qErJoszPgO9yxjSgQkrpZzzuIo2zsQNWfNIjkuJ2F18 jVKzCyuYQhLUVnIBpDAcRa33k37SvXJdyZgRdiAin/wGixrRw0LivX3qcpfe1EZB MgSsiAa7c82/Fy1gzj+49zcfPkk7cqpQnTK3dDSMRyOsZuN34meiaYvT7tmI44/q EQOJvat49Bm/54ueqBHET0dMCY447TDudG9zJinvEGkbCQzTxx1dMk4EP68qnOZF /57meyzaNs5Xo9KM/KpSXYC+Z0SKWQBDNVN3rtNLzDg+lQi5GCKVmXss2r5xabYN m/dMrZeJskVi+/2IIkNgUop7UgCvNDMq+PtEQMEh7c2ezO4eQWKkz/t2Y6MguK0Y NbBLy+4tfmML2mLHyqBB =OAav -----END PGP SIGNATURE----- Merge tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner arm64 DT changes for 4.15" from Maxime Ripard: Most notable changes: - SPI and DMA support on the a64 - New boards: NanoPi NEO Plus2 * tag 'sunxi-dt64-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: allwinner: Correct unit name in devicetree binding example arm64: allwinner: a64: add dma controller references to spi nodes arm64: allwinner: a64: Add device node for DMA controller arm64: allwinner: a64: Fix node with unit name and no reg property arm64: allwinner: a64: Fix simple-bus unit address format error arm64: allwinner: h5: add NanoPi NEO Plus2 DT support arm64: allwinner: a64: add SPI nodes |
|
|
Arnd Bergmann
|
c0dec1ec33 |
Allwinner DT changes for 4.15
The most notable changes are:
- Conversion to the last SoC (A10, A20) to the new clock framework
- HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
- Support for the various power supplies on a number of boards
- Fix of DTC warnings on a number of SoCs, but most of them still need
some work
- New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
Banana Pi M2 Ultra
-----BEGIN PGP SIGNATURE-----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=HjP6
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Pull "Allwinner DT changes for 4.15" from Maxime Ripard:
The most notable changes are:
- Conversion to the last SoC (A10, A20) to the new clock framework
- HDMI and dual pipeline support for the A10, A20 and A31 DRM driver
- Support for the various power supplies on a number of boards
- Fix of DTC warnings on a number of SoCs, but most of them still need
some work
- New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry,
Banana Pi M2 Ultra
- New R40 SoC support
* tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (63 commits)
ARM: sun8i: r40: enable USB host for Banana Pi M2 Ultra
ARM: sun8i: v40: add 5V regulator for Banana Pi M2 Berry
ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra
ARM: sun8i: r40: add USB host port nodes for R40
ARM: dts: sun4i: Enable HDMI support on some A10 devices
ARM: dts: sun7i: Enable HDMI support on some A20 devices
ARM: dts: sun7i: Add device nodes for display pipelines
ARM: dts: sun4i: Add device nodes for display pipelines
ARM: dts: sun8i: r40: add watchdog device node
ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and battery
ARM: dts: sun9i: Change node names to remove underscores
ARM: dts: sun9i: Change node names to remove underscores
ARM: dts: sun4i: Remove underscores from nodes names
ARM: dts: sun4i: Provide default muxing for relevant controllers
ARM: dts: sun4i: Change pinctrl nodes to avoid warning
ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices
ARM: dts: sun6i: Add device node for HDMI controller
ARM: dts: sun4i: Change LRADC node names to avoid warnings
ARM: dts: sun4i: Remove skeleton and memory to avoid warnings
ARM: dts: sun4i: Remove gpio-keys warnings
...
|
|
|
Arnd Bergmann
|
36a247ba72 |
UniPhier ARM SoC fixes for v4.14
- Add necessary clock to EHCI node -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZ6iQbAAoJED2LAQed4NsG/+gP/3KBBo4ta73DSJIwNHLO2DJK uNLRNHYSAvYTp+DD9sUkyaeU/YeE6A+SqD0Zm6gSPfoJTCYI9dS0ktLPiMhXLu0L Qc1JttaKA6SBmydbsLBuzDDSZzTt7D2lUjHECZ/BxTsFEOEWriRA1/LNOx+lmnHj F7euH9Tl09W9OcYj1a0qm2B1boMfyVjd3zvWEXU/iKf869J6iNruVo4WUV/3dG55 mhcgBHF2YX0Rbpl5JPs/bSWDtQVgFP2jAyuQ3L0i0xsomWMdzVSEZbULCFrzG52n 1IHy7RcnZ0ID7QBozruQVYw689dmRYz1qGRBgHmi739PUY+PgucBo0zKrr0NA0UA g2ctaIpZpQ/yp6cmajoVLBfGs7K+bFMwaXXjrbT+2Ug4k+HcSYpAYzgy2JkI3c3C 574YNo8DrKj/Wji2gg21Ulp7lG6MIwgW2hXQxlX7LFvlEtG5nxjHuSKItdn4FfpJ VS0tReyvRvHAyEn8/1g+YltVVPO+9yzdLj4Enm9b2j/kz1Kihq3zb51eJExd9U/E mgeYMWXcMST5oiOtFMSFEJSU9mebNFA7PRdLQc5R3RWAOCcwHV0N6WVBrDA8NkGs o/wrPXaOXrDHIL8FrilrD4tYcRp6Pa/G8zJUyXt8Fw9ykCzTIvLsn63Qbme4kpga LsArieMVrpCEzEb/R5me =hxk8 -----END PGP SIGNATURE----- Merge tag 'uniphier-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes Pull "UniPhier ARM SoC fixes for v4.14" from Masahiro Yamada: - Add necessary clock to EHCI node * tag 'uniphier-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add STDMAC clock to EHCI nodes ARM: dts: uniphier: add STDMAC clock to EHCI nodes |
|
|
Jerome Brunet
|
b94d22d94a |
ARM64: dts: meson-gx: add external PHY interrupt on some platforms
Add the external PHY interrupt on the nanopi-k2, odroid-c2, p200, p230 and q200 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Jerome Brunet
|
9dbb56ea09 |
ARM64: dts: meson-gx: add gpio interrupt controller
Add gpio interrupt controller to Amlogic GX family SoCs Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Neil Armstrong
|
e841ec956e |
ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply
Looking at the schematics, the USB Power Supply is shared between the
two USB interfaces,
If the usb0 fails to initialize, the second one won't have power.
Fixes:
|
|
|
Andreas Färber
|
a9ce6f8545 |
arm64: dts: realtek: Add MeLE V9
Add an initial Device Tree for MeLE V9 Media Player. Cc: meleservice@mele.cn Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Andreas Färber
|
f8b3436dad |
arm64: dts: realtek: Factor out common RTD129x parts
Prepares for RTD1293 and RTD1296. Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Romain Perier
|
6f8c539313 |
arm64: dts: rockchip: add efuse for RK3368 SoCs
This adds the definition for eFuse that is found on RK3368 SoCs with the corresponding data cells. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Masahiro Yamada
|
76c48e1eca |
arm64: dts: uniphier: add resets properties
Add resets properties to all nodes that have reset lines. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Masahiro Yamada
|
b6e5ec203b |
arm64: dts: uniphier: add eMMC hardware reset provider node
Add mmc-pwrseq-emmc node to perform standard eMMC hardware reset procedure. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Masahiro Yamada
|
15e85695e5 |
arm64: dts: uniphier: add GPIO hog definition
Interrupt lines from on-board devices are connected to the GPIO controller. Add GPIO hogging so that the corresponding GPIO line is automatically requested. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Masahiro Yamada
|
429f203eb7 |
arm64: dts: uniphier: route on-board device IRQ to GPIO controller
Interrupt lines from on-board devices are connected to the GPIO controller. Handle this correctly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Masahiro Yamada
|
277b51e705 |
arm64: dts: uniphier: add GPIO controller nodes
The GPIO controller also acts as an interrupt controller and the interrupt lines are connected to the AIDET block. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Masahiro Yamada
|
9cd7d03f20 |
arm64: dts: uniphier: fix W=2 build warnings
Fix warnings like follows:
Warning (node_name_chars_strict): Character '_' not recommended in ...
Commit
|
|
|
Masahiro Yamada
|
ae4cce8788 |
arm64: dts: uniphier: enable NAND for PXs3 reference board
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |