I've sent email to the Linux Foundation's webmaster contact (RT ticket
tracker) asking for a redirect for the old value [linuxfoundation.org
the page.
Signed-off-by: Jon Bailey <jon@jonbailey.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The documentation for dax is not up to date with respect to the struct
page support available in some of the device drivers that utilize
it.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Correct the path used to create triggers.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
CAI Qian <caiqian@redhat.com> pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.
mkdir /tmp/1 /tmp/2
mount --make-rshared /
for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done
Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.
As such CVE-2016-6213 was assigned.
Ian Kent <raven@themaw.net> described the situation for autofs users
as follows:
> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.
So I am setting the default number of mounts allowed per mount
namespace at 100,000. This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts. Which should be perfect to catch misconfigurations and
malfunctioning programs.
For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.
Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.
-----BEGIN PGP SIGNATURE-----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=k9a0
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.9-rc1
Adds support for one more panel to the simple-panel driver, fixes up a
couple of delays and flags for existing panels and finally adds a new
driver for the DSI panel found on Nexus 7 devices.
* tag 'drm/panel/for-4.9-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel
dt-bindings: Add JDI LT070ME05000 panel bindings
drm/panel: simple: Fix bus_format for the Olimex LCD-OLinuXino-4.3TS
drm/panel: simple-panel: Add delay timings for Starry KR122EA0SRA
drm/panel: simple: Fix bus flags for Ortustech com43h4m85ulc
drm/panel: simple: Add Innolux G101ICE-L01 panel
drm/panel: simple: Add delay timing for Sharp LQ123P1JX31
drm/dsi: Implement DCS set/get display brightness
drm/dsi: Order DCS helpers by command code
Convert g_NCR5380 to use scsi_add_host instead of scsi_module.c Use
pnp_driver and isa_driver to manage cards.
In order to support multiple cards, new module parameter format is
introduced. The old parameters are kept for compatibility.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove deprecated __setup for parsing command line parameters.
g_NCR5380.* parameters could be used instead.
This might break existing setups with g_NCR5380 built-in (if there are
any). But it has to go in order to remove the overrides[] array.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds a simple device driver to expose the iBT interface on
Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are
commonly used as BMCs (BaseBoard Management Controllers) and this
driver implements the BMC side of the BT interface.
The BT (Block Transfer) interface is used to perform in-band IPMI
communication between a host and its BMC. Entire messages are buffered
before sending a notification to the other end, host or BMC, that
there is data to be read. Usually, the host emits requests and the BMC
responses but the specification provides a mean for the BMC to send
SMS Attention (BMC-to-Host attention or System Management Software
attention) messages.
For this purpose, the driver introduces a specific ioctl on the
device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running
on the BMC to signal the host of such an event.
The device name defaults to '/dev/ipmi-bt-host'
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
[clg: - checkpatch fixes
- added a devicetree binding documentation
- replace 'bt_host' by 'bt_bmc' to reflect that the driver is
the BMC side of the IPMI BT interface
- renamed the device to 'ipmi-bt-host'
- introduced a temporary buffer to copy_{to,from}_user
- used platform_get_irq()
- moved the driver under drivers/char/ipmi/ but kept it as a misc
device
- changed the compatible cell to "aspeed,ast2400-bt-bmc"
]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[clg: - checkpatch --strict fixes
- removed the use of devm_iounmap, devm_kfree in cleanup paths
- introduced an atomic-t to limit opens to 1
- introduced a mutex to protect write/read operations]
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
- Various cleanups and removal of redundant code
- Two important fixes for not using an in-kernel irqchip
- A bit of optimizations
- Handle SError exceptions and present them to guests if appropriate
- Proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- Preparations for GICv3 save/restore, including ABI docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX6rKQAAoJEEtpOizt6ddy8i4H/0bfB1EVukggoL/FfGeds/dg
p2FG0oOsggcSBwK7VXUUvVllO7ioUssRCqqkn1e0/bCLtQrN4ex4PqJ3618EHFz/
pLP72hf8Zl33rP3OVtPaDcxzjjKKdf+xGbBIv3AE7x7O5rFZg4lWHeWjy4yuhFv2
Jm+8ul7JCxCMse08Xc90riou4i/jWjyoLadHbAoeX3tR+dVcZyOUZSlgAPI1bS/P
rOQi/zkl3bT2R3kh28QuEFTrJ9BVTnmw25BRW8DNr6+CWmR9bpM6y7AGzOwrZ3FZ
F1MbsPpN3ogcjvPg2QTYuOoqrwz8NLLHw5pR5YNj84VppjSpSsAhKU7Ug5Uhsr0=
=1z/L
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into next
KVM/ARM Changes for v4.9
- Various cleanups and removal of redundant code
- Two important fixes for not using an in-kernel irqchip
- A bit of optimizations
- Handle SError exceptions and present them to guests if appropriate
- Proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- Preparations for GICv3 save/restore, including ABI docs
The recommended property name for all kinds of GPIOs is to end it with
"-gpios" even if there is only one GPIO. Update the documentation to follow
this fact.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E
(also known as R8A7743/5). The Ether core is the same as in the R-Car gen2
SoCs, so will share the code/data with them...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to reflect the change of FIB offload infrastructure from
switchdev objects to FIB notifier.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
=Y/L5
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc8' into drm-next
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Iyf9
-----END PGP SIGNATURE-----
Merge tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux into drm-next
Second attempt for 3rd drm/tilcdc pull request for v4.9.
* tag 'tilcdc-4.9-3.1' of https://github.com/jsarha/linux:
drm/tilcdc: fix wrong error handling
drm/tilcdc: Return directly after a failed kfree_table_init() in tilcdc_convert_slave_node()
drm/tilcdc: Remove "default" from blue-and-red-wiring property binding
drm/tilcdc: Fix non static symbol warning
drm/tilcdc: mark symbols static where possible
drm/tilcdc: add missing header dependencies
drm/tilcdc: WARN if CRTC is touched without CRTC lock
drm/tilcdc: Take CRTC lock when calling tilcdc_crtc_disable()
drm/tilcdc: Remove unnecessary tilcdc_crtc_disable() from tilcdc_unload()
drm/tilcdc: Flush flip-work workqueue before drm_flip_work_cleanup()
drm/tilcdc: Clean up LCDC functional clock rate setting code
drm/tilcdc: Take crtc modeset lock while updating the crtc clock rate
A bit smaller pull-req this time around. Some continued DT binding
cleanup to get the corresponding dts bits merged upstream (through
other trees). And explicit fence-fd support for submit ioctl.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: bump kernel api version for explicit fencing
drm/msm: submit support for out-fences
drm/msm: move fence allocation out of msm_gpu_submit()
drm/msm: submit support for in-fences
drm/msm: extend the submit ioctl to pass in flags
drm/msm/mdp5: Set rotation property initial value to DRM_ROTATE_0 insted of 0
drm/msm/hdmi: don't print error when adding i2c adapter fails
drm/msm/mdp4: mark symbols static where possible
drm/msm: Remove call to reservation_object_test_signaled_rcu before wait
drm/msm/hdmi: Clean up HDMI gpio DT bindings
drm/msm/mdp4: Fix issue with LCDC/LVDS port parsing
If userspace creates a PMU for the VCPU, but doesn't create an in-kernel
irqchip, then we end up in a nasty path where we try to take an
uninitialized spinlock, which can lead to all sorts of breakages.
Luckily, QEMU always creates the VGIC before the PMU, so we can
establish this as ABI and check for the VGIC in the PMU init stage.
This can be relaxed at a later time if we want to support PMU with a
userspace irqchip.
Cc: stable@vger.kernel.org
Cc: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Add the device tree binding needed to support the TX FIFO threshold
parameter.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add initialisation of control register and baud rate to
cdns_early_console_setup(), required when running kernel standalone
without a boot loader. Baud rate is only initialised when specified in
earlycon command-line option, otherwise it is assumed this has been
set by a boot loader. Updated Documentation/kernel-parameters.txt
accordingly.
Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds a new trigger responsible for turning on LED when USB
device gets connected to the selected USB port. This can can useful for
various home routers that have USB port(s) and a proper LED telling user
a device is connected.
The trigger gets its documentation file but basically it just requires
enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1).
There was a long discussion on design of this driver. Its current state
is a result of picking them most adjustable solution as others couldn't
handle all cases.
1) It wasn't possible for the driver to register separated trigger for
each USB port. Some physical USB ports are handled by more than one
controller and so by more than one USB port. E.g. USB 2.0 physical
port may be handled by OHCI's port and EHCI's port.
It's also not possible to assign more than 1 trigger to a single LED
and implementing such feature would be tricky due to syncing triggers
and sysfs conflicts with old triggers.
2) Another idea was to register trigger per USB hub. This wouldn't allow
handling devices with multiple USB LEDs and controllers (hubs)
controlling more than 1 physical port. It's common for hubs to have
few ports and each may have its own LED.
This final trigger is highly flexible. It allows selecting any USB ports
for any LED. It was also modified (comparing to the initial version) to
allow choosing ports rather than having user /guess/ proper names. It
was successfully tested on SmartRG SR400ac which has 3 USB LEDs,
2 physical ports and 3 controllers.
It was noted USB subsystem already has usb-gadget and usb-host triggers
but they are pretty trivial ones. They indicate activity only and can't
have ports specified.
In future it may be good idea to consider adding activity support to
usbport as well. This should allow switching to this more generic driver
and maybe marking old ones as obsolete.
This can be implemented with another sysfs file for setting mode. The
default mode wouldn't change so there won't be ABI breakage and so such
feature can be safely implemented later.
There was also an idea of supporting other devices (PCI, SDIO, etc.) but
as this driver already contains some USB specific code (and will get
more) these should be probably separated drivers (triggers).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add HW throttle configuration sub-node for soctherm, which
is used to describe the throttle event, and worked as a
cooling device. The "hot" type trip in thermal zone can
be bound to this cooling device, and trigger the throttle
function.
Signed-off-by: Wei Ni <wni@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This adds the device tree binding documentation for the mediatek thermal
controller found on Mediatek MT2701.
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Maxim Semiconductor MAX77620 supports alarm interrupts when
its die temperature crosses 120C and 140C. These threshold
temperatures are not configurable.
Add DT binding document to details out the DT property related
to MAX77620 thermal functionality.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This adds support for hardware-tracked trip points to the device tree
thermal sensor framework.
The framework supports an arbitrary number of trip points. Whenever
the current temperature is updated, the trip points immediately
below and above the current temperature are found. A .set_trips
callback is then called with the temperatures. If there is no trip
point above or below the current temperature, the passed trip
temperature will be -INT_MAX or INT_MAX respectively. In this callback,
the driver should program the hardware such that it is notified
when either of these trip points are triggered. When a trip point
is triggered, the driver should call `thermal_zone_device_update'
for the respective thermal zone. This will cause the trip points
to be updated again.
If .set_trips is not implemented, the framework behaves as before.
This patch is based on an earlier version from Mikko Perttunen
<mikko.perttunen@kapsi.fi>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Add apis for platform thermal drivers to query for slope and offset
attributes, which might be needed for temperature calculations.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
TSENS is Qualcomms' thermal temperature sensor device. It
supports reading temperatures from multiple thermal sensors
present on various QCOM SoCs.
Calibration data is generally read from a non-volatile memory
(eeprom) device.
Add a skeleton driver with all the necessary abstractions so
a variety of qcom device families which support TSENS can
add driver extensions.
Also add the required device tree bindings which can be used
to describe the TSENS device in DT.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This adds a driver for the Elan eKTF2127 touchscreen controller,
which speaks an i2c protocol which is distinctly different from
the already supported eKTH controllers.
Signed-off-by: Michel Verlaan <michel.verl@gmail.com>
Signed-off-by: Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sdhci controller on xilinx zynq devices will not function unless
the CD bit is provided. http://www.xilinx.com/support/answers/61064.html
In cases where it is impossible to provide the CD bit in hardware,
setting the controller to test mode and then setting inserted to true
will get the controller to function without the CD bit.
The device property "xlnx,fails-without-test-cd" will let the arasan
driver know the controller does not have the CD line wired and that the
controller does not function without it.
Signed-off-by: Zach Brown <zach.brown@ni.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Changes to the DT binding document to separate the BCM7425 and the
BCM7445.
A compatible string "brcm,bcm7425-sdhci" was representing the BCM7425
SDHCI host controller with all BRCMSTB SoCs including the BCM7445. Now
it should be separated because vary a bit in initialize each host
controller.
- Renames the DT binding document to common name.
- Adds a compatible string "brcm,bcm7445-sdhci" that is representing the
BCM7445 with thereafter 28nm generation ARM based SoCs.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Add resets property to synopsys-dw-mshc bindings. It is intended to
represent the hardware reset signal present internally in some host
controller IC designs.
See Documentation/devicetree/bindings/reset/reset.txt for details.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The core MMC code adds two (optional) regulator properites that drivers
should use to get their supplies. This is not documented anywhere so add
information on it.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some devices need a while to boot their firmware after providing clks /
de-asserting resets before they are ready to receive sdio commands.
This commits adds a post-power-on-delay-ms devicetree property to
mmc-pwrseq-simple for use with such devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On some boards (android tablets) different batches use different sdio
wifi modules. This is not a problem since mmc/sdio is an enumerable bus,
so we only need to describe and activate the mmc controller in dt and
then the kernel will automatically load the right driver.
Sometimes it is useful to specify certain ethernet properties for these
"unknown" sdio devices, specifically we want the boot-loader to be able
to set "local-mac-address" as some of these sdio wifi modules come without
an eeprom / without a factory programmed mac address.
Since the exact device is unknown (differs per batch) we cannot use
a wifi-chip specific compatible, thus sometimes it is desirable to have a
mmc function node, without having to make up an otherwise unused compatible
for the node, so make the compatible property optional.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It turns out that sun4i (A10) and sun5i (A13 & co) do not have sample
clocks, so add a new sun7i-a20-mmc compatible and do not try to use
sample clocks on sun4i / sun5i.
Since sun4i / sun5i do not have sample clocks, they cannot (reliably) do
DDR rates, so only set MMC_CAP_1_8V_DDR when we do have sample clks.
Note this patch leaves the clk_prepare_enable() / clk_disable_unprepare()
calls to the sample clks as-is, without adding checks for them being
NULL. All the clk_foo calls accept a NULL clk and will return success when
called with a NULL clk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch add basic structure of a virtual gpio device(gpio-mockup)
for testing gpio subsystem. The tester could manipulate such device
through userspace(sysfs or char device) and check the result from
debugfs.
Currently, it support one or more gpiochip(determined by module
parameters with base,ngpio pair). One could test the overlap of
different gpiochip and test the direction and/or output values of
these chips.
Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The A83T SoC has the same dma engine as the A31 (sun6i), with a reduced
amount of endpoints and physical channels.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Map/Unmap a device MMIO resource from a physical address. If no dma_map_ops
method is available the operation is a no-op.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
tlv320dac31xx is a subset of tlv320aic31xx:
- it does not have MIC inputs and ADC, thus capture is not supported,
- it has analog inputs AIN1/AIN2 that can be mixed into output.
Although tlv320dac31xx does work with tlv320aic31xx driver, this setup
does register non-existent widgets and non-existent capture stream.
Thus userspace lists non-existent objects in user interfaces, an can
access these, causing operations with device registers that are
declared as "reserved" in tlv320dac31xx datasheet.
This patch fixes this situation by separating controls/widgets/routes
into common, aic31xx-specific, and dac31xx-specific parts. Only parts
that match actual hardware (as declared in "compatible" device tree
property) are registered.
Changes from v1:
- update device tree binding documentation,
- rebased on top of "ASoC: codec duplicated callback function goes to
component on tlv320aic31xx" commit.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree property to define auxiliary devices to be added to
simle-audio-card.
Together with proper audio routing definition, this allows to use
simple-card in setups where separate amplifier chip is connected to
codec's output.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Three files are modified, the driver, header file and the binding document.
Updates for the regulator source file include and .of_match_table entry
and node match checking in the probe() function for a compatible pv88080
silicon type. A new "HVBUCK" is added in source file and added
regsiter definition in header file for pv88080 bb silicion.
The binding documentation changes have been made to reflect these updates.
Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a dev_attr which can be used to combine the accelerator
and brake pedals into a single axis. This is useful for older games
which can not handle seperate accelerator and brake.
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pop happens when mclk applied but dmic's own boot-time
Specify dmic delay times in dt to make sure
clocks are ready earlier than dmic working
Signed-off-by: Wonjoon Lee <woojoo.lee@samsung.com>
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
fix typo in
Documentation/devicetree/bindings/net/mediatek-net.txt
Cc: devicetree@vger.kernel.org
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
add phy-mode "trgmii" to
Documentation/devicetree/bindings/net/ethernet.txt
Cc: devicetree@vger.kernel.org
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the watchdog framework centrializes the IOCTL interfaces of device
drivers now, SETPRETIMEOUT and GETPRETIMEOUT need to be added in the
common code.
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[vzapolskiy: added conditional pretimeout sysfs attribute visibility]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
STiH415/6 SoC support is being removed from the kernel
so update the dt bding document to reflect this.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: <linux-watchdog@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Pull input updates from Dmitry Torokhov:
"Just a fix up for the firmware handling to the Silead driver (which is
a new driver in this release)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead_gsl1680 - use "silead/" prefix for firmware loading
Input: silead_gsl1680 - document firmware-name, fix implementation
Add support for the clock. Currently we enable
at probe and relinquish at remove.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Move pcmcia crc32hash tool from Documentation to tools/pcmcia and
remove it from Documentation Makefile. Update location information
for this tool. Create a new Makefile to build pcmcia. It can be built
from top level directory or from pcmcia directory:
Run make -C tools/pcmcia or cd tools/pcmcia; make
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move laptops dslm tool to tools/laptop/dslm and remove it from
Documentation Makefile. Update location information for this
tool. Create a new Makefile to build dslm. It can be built
from top level directory or from laptops directory:
Run make -C tools/laptop/dslm or cd tools/laptop/dslm; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move accounting tool to tools and remove it from Documentation
Makefile. Update location information for this tool. Create a
new Makefile to build accounting. It can be built from top level
directory or from accounting directory:
Run make -C tools/accounting or cd tools/accounting; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move auxdisplay examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build auxdisplay. It can be built
from top level directory or from auxdisplay directory:
Run make -C samples/auxdisplay or cd samples/auxdisplay; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move watchdog examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build watchdog. It can be built
from top level directory or from watchdog directory:
Run make -C samples/watchdog or cd samples/watchdog; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move timers examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build timers. It can be built
from top level directory or from timers directory:
Run make -C samples/timers or cd samples/timers; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move misc-devices/mei examples to samples/mei and remove it from
Documentation Makefile. Delete misc-devices/Makefile.
Create a new Makefile to build samples/mei. It can be built from top
level directory or from mei directory:
Run make -C samples/mei or cd samples/mei; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Erratum A-008585 says that the ARM generic timer counter "has the
potential to contain an erroneous value for a small number of core
clock cycles every time the timer value changes". Accesses to TVAL
(both read and write) are also affected due to the implicit counter
read. Accesses to CVAL are not affected.
The workaround is to reread TVAL and count registers until successive
reads return the same value. Writes to TVAL are replaced with an
equivalent write to CVAL.
The workaround is to reread TVAL and count registers until successive reads
return the same value, and when writing TVAL to retry until counter
reads before and after the write return the same value.
The workaround is enabled if the fsl,erratum-a008585 property is found in
the timer node in the device tree. This can be overridden with the
clocksource.arm_arch_timer.fsl-a008585 boot parameter, which allows KVM
users to enable the workaround until a mechanism is implemented to
automatically communicate this information.
This erratum can be found on LS1043A and LS2080A.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Scott Wood <oss@buserror.net>
[will: renamed read macro to reflect that it's not usually unstable]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Engicam providing design services of electronic systems with
high content of technology, relying on a long experience in
electronic design.
For more info visit
http://www.engicam.com/en/
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Rob Herring <robh@kernel.org>
This erratum describes a bug in logic outside the core, so MIDR can't be
used to identify its presence, and reading an SoC-specific revision
register from common arch timer code would be awkward. So, describe it
in the device tree.
Signed-off-by: Scott Wood <oss@buserror.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Silead Inc.specializes in touchscreen technology and got recently
introduced in a binding for the gsl1680 i2c touchscreen.
Therefore add the needed vendor-prefix as well.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
When using GPIO irqchip helpers to setup irqchip for a gpiolib based
driver, it is not possible to select which GPIOs to add to the IRQ domain.
Instead it just adds all GPIOs which is not always desired. For example
there might be GPIOs that for some reason cannot generated normal
interrupts at all.
To support this we add a flag irq_need_valid_mask to struct gpio_chip. When
this flag is set the core allocates irq_valid_mask that holds one bit for
each GPIO the chip has. By default all bits are set but drivers can
manipulate this using set_bit() and clear_bit() accordingly.
Then when gpiochip_irqchip_add() is called, this mask is checked and all
GPIOs with bit is set are added to the IRQ domain created for the GPIO
chip.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The generic NAND DT bindings allows one to tweak the ECC strength and
step size to their need. It can be used to lower the ECC strength to
match a bootloader/firmware config, but might also be used to get a better
reliability.
In the latter case, the user might want to use the maximum ECC strength
without having to explicitly calculate the exact value (this value not
only depends on the OOB size, but also on the NAND controller, and can
be tricky to extract).
Add a generic 'nand-ecc-maximize' DT property and the associated
NAND_ECC_MAXIMIZE flag, to let ECC controller drivers select the best
ECC strength and step-size on their own.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Remove "default" keyword from blue-and-red-wiring devicetree property
binding document. The code does not support and there is no intention
to support it.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
It is now unused, remove it before someone else thinks its a good idea
to use this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds 3 more clocks to Exynos4 ISP driver. Enabling them is
needed to make the hardware operational. Till now it worked only because
those clocks were registered with IGNORE_UNUSED flag and were enabled
by default after SoC reset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by linuxdoc[1] tool, using:
$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done
include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index
include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index
include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2
include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops
include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops
include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set
include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad
include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link
include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf
include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode
include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close
include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'
[1] https://return42.github.io/linuxdoc/linux.html
The above are real issues at the documentation. On several cases,
caused by cut-and-paste.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the dts property for the capability if TRGMII supported on GAMC0
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a few indentation issues to enable automated table reorganization
by a regex-based script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This adds documentation of device tree bindings for the
STM32 USART
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Again move it from the unmaintainable csv into DOC free-form overview
sections.
v2: Types Lionel&Sean spotted.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-6-git-send-email-daniel.vetter@ffwll.ch
Try to spec a bit more precisely how they all fit together, now that
at least the code is for all the additional properties is in one
place.
Also remove the entries for the standardized properties from the
table, because that thing is supremely unmaintaineable.
v2: Fix typos Sean spotted.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-4-git-send-email-daniel.vetter@ffwll.ch
Big thing is untangling and carefully documenting the different uapi
types of planes. I also sprinkled a few more cross references around
to make this easier to discover.
As usual, remove the kerneldoc for internal functions which are not
exported. Aside: We should probably go OCD on all the ioctl handlers
and consistenly give them an _ioctl postfix.
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474448370-32227-2-git-send-email-daniel.vetter@ffwll.ch
Just pure code movement, cleanup and polish will happen in later
patches.
v2: Don't forget all the ioctl! To extract those cleanly I decided to
put check_src_coords into drm_framebuffer.c (and give it a
drm_framebuffer_ prefix), since that just checks framebuffer
constraints.
v3: rebase over PAGE_FLIP_TARGET.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[seanpaul]
This patch as posted on the list was rebased on:
commit 6f00975c61
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Aug 20 12:22:11 2016 +0200
drm: Reject page_flip for !DRIVER_MODESET
so as a result of moving the page_flip ioctl, this fix has
been rolled into this patch.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Recent discussion has made it clear that there is no community consensus on
this particular rule. Remove it now, lest it inspire yet another set of
unwanted "cleanup" patches.
This partially reverts 865a1caa4b (CodingStyle: Clarify and complete
chapter 7).
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add cross references for the development process documents
that were converted to ReST:
Documentation/SubmitChecklist
Documentation/SubmittingDrivers
Documentation/SubmittingPatches
Documentation/development-process/development-process.rst
Documentation/stable_kernel_rules.txt
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As this file is mentioned at the development-process/ book,
let's convert it to ReST markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Add pinctrl and clk support for the Orion5x SoC mv88f5181 variant
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfiWTAACgkQCwYYjhRyO9X3ZQCfdOuvxXIajKkmxgvVwNgzEeLF
GEIAn1LYY/vmNikPhxH4O2FBi/9NBdZM
=GrPA
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-4.9-1' of git://git.infradead.org/linux-mvebu into next/drivers
Pull "mvebu drivers for 4.9 (part 1)" from Gregory CLEMENT:
- Add pinctrl and clk support for the Orion5x SoC mv88f5181 variant
* tag 'mvebu-drivers-4.9-1' of git://git.infradead.org/linux-mvebu:
pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
clk: mvebu: Add clk support for the orion5x SoC mv88f5181
Support configuration of ext_wakeup sources. This patch makes it
possible to enable ext_wakeup and set it's polarity, depending on board
configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
notify about power-button presses. Handling power-button presses enables
to recover from RTC-only power states correctly.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
As far as I'm aware the mv88f5181-b1 and mv88f5181l are the same at the
pinctrl level, so re-use the definitions for both.
[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Referring to the u-boot sources for the Netgear WNR854T, add support
for the mv88f5181.
[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reorder the on-line documents based on their timestamp or
copyright notes. More updated documents come first.
While here, add the number of pages for POSIX4 document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is a way better to have a timestamp to help identifying
when something is too old.
So, retrieve the dates marked on the existing documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are still some broken docs: the URLs point to somewhere,
however, the texts are not there anymore. I was able to
find the texts on other URLs for some of those, but they're all
too old. So, just get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are three places where it mentions in-kernel docs.
Move them to a separate topic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The Linux Kernel - This book is for Kernel 2.0.33
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add two books from my own bookshelf. I found them useful by
the time I bought; so it could be useful to others ;)
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of using a random order, place the books on publication
date, from the newest to the oldest.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- remove LDD versions 1 and 2, as there's already an entry for
LDD3;
- add a link between LDD online and published entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Use lower case for sections, as this is the standard used on
the other ReST files;
- The latest version of this document is at the Kernel source, and
not at the listed URL. So, move it to the end of the doc.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This introduces a consistent indenting of 4 spaces for all
lists.
[mchehab@s-opensource.com: rebased to apply before rename]
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Background/Reasoning:
Books:
------
* Linux Kernel Networking by Rami Rosen
While some parts are quite short and could be
more carefully explained it's still a good recomendation
for understanding linux kernel networking, (IMHO)
* Linux Treiber entwickeln:
It sure is a drawback that this is a german book.
But it's quite recent, well structured and there are also
other non-english (spanish) books/papers in this list.
Papers:
-------
* On Submitting kernel Patches
Contains 2 case studies of bigger patch sets and how (or how not)
they were merged. I found it helpful
* Tracing the Way of Data in a TCP Connection through the Linux Kernel
Since this was written by me this inclusion may be a bit biased :p
Neitherless I think this gives a good introduction on
understanding/exploring linux internals using ftrace and an overview
of Linux TCP internals.
[mchehab@s-opensource.com: rebased to apply before rename]
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The dots at the ends of the list elements introduced
unnecesarry newlines in the "compiled" document.
While this was not "mission critical" it's not nice to look at
either.
[mchehab@s-opensource.com: rebased to apply before rename]
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This removes all dead links to online docs which
are dead according to Jon and Mauro in
https://lkml.kernel.org/r/20160916182849.2a7101ea () vento ! lan
Additionally some references to very old articles refering to
linux 2.2 and 2.0 are deleted.
[mchehab@s-opensource.com: rebased to apply before rename]
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mauro's patch set introduced some bare :: lines; these can be represented
by a double colon at the end of the preceding text line. The result looks
a little less weird and is less verbose.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- use ``foo`` to markup inline literal stuff, effectively making it
to be presented as a monospaced font when parsed by Sphinx;
- the markup below the title should have the same length as the
title;
- Fix the list markups, from "1:" to "1)";
- Split item 2 into a separate list for the build options, in order
to be presented as a list on Sphinx;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Task 11 (kernel-doc) still mentions usage of make manpages, but
this won't work if the API is documented via Sphinx. So, update
it to use either htmldocs or pdfdocs, with are the documentation
targets that work for all.
While here, add ReST reference to the kernel documentation book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- A few link references were missing http://
- Several sites are now redirecting to https protocol. On such
cases, just use the https URL.
NOTE: all URLs were checked and they're pointing to the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Do a series of minor improvements at the ReST output format:
- Instead of using the quote blocks (::) for quotes, use
italics. That looks nicer on epub (and html) output, as
no scroll bar will be added. Also, it will adjust line
breaks on the text automatically.
- Add a missing reference to SubmittingPatches.rst and use
**foo** instead of _foo_.
- use bold for "The Perfect Patch" by removing a newline.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The description there are pre-Sphinx. Update it to cover the
new way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add cross references for the documents mentioned at HOWTO and
are under the Documentation/ directory, using the ReST notation.
It should be noticed that HOWTO also mentions the /README file.
We opted to not touch it, for now, as making it build on
Sphinx would require it to be moved to a Documentation/foo
directory.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Do a few changes to make the output look better:
- use bullets on trivial patches list;
- use monotonic font for tools name;
- use :manpage:`foo` for man pages;
- don't put all references to maintainer*html at the same line.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Change the sections to use ReST markup;
- Add cross-references where needed;
- convert aspas to verbatim text;
- use code block tags;
- make Sphinx happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Change the document title markup to make it on a higher level;
- Add blank lines as needed, to improve the output;
- use italics for the country-code at kernel.org ftp URL.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- use ReST markups for section headers;
- add cross-references to the options;
- mark code blocks;
- a few minor changes to make Sphinx happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add markups for it to be properly parsed by Sphinx.
As people browsing this document may not notice that the source
file title is "stable_api_nonsense", I opted to use bold to
the rationale for this document. I also found it better to
add a note when it says that the nonsense applies only to the
kABI/kAPI, and not to uAPI.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a name for the document and convert the sections to
ReST markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Convert document name to ReST;
- Convert footnotes;
- Convert sections to ReST format;
- Don't use _foo_, as Sphinx doesn't support underline. Instead,
use bold;
- While here, remove whitespaces at the end of lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are two places there where there are notes that should
be highlighted. So, use the ReST note markup for such texts.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Sphinx doesn't accept underline markups by purpose.
While there are ways to support underline via CSS, this won't
be portable with non-html outputs.
As we want CodingStyle to do emphasis, replace _foo_ by **foo**,
using bold emphasis.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On Sphinx/ReST notation, ``foo`` means that foo will be will be
marked as inline literal, effectively making it to be presented
as a monospaced font.
As we want this document to be parsed by Sphinx, instead of using
"foo", use ``foo`` for the names that are literal, because it is an
usual typographic convention to use monospaced fonts for functions
and language commands on documents, and we're following such
convention on the other ReST books.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Fix all chapter identation;
- add c blocks where needed;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As discussed at linux-doc ML, the best is to keep all documents
backward compatible with Sphinx version 1.2, as it is the latest
version found on some distros like Debian.
All books currently support it.
Please notice that, while it mentions the eventual need of
XeLaTex and texlive to build pdf files, this is not a minimal
requirement, as one could just be interested on building html
documents. Also, identifying the minimal requirements for
texlive packages is not trivial, as each distribution seems to
use different criteria on grouping LaTex functionalities.
While here, update the current kernel version to 4.x.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Fix chapter identation inconsistencies;
- Convert table to ReST format;
- use the right tag for bullets;
- Fix bold emphasis;
- mark blocks with :: tags;
- use verbatim font for files;
- make Sphinx happy
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document is old: it is from Kernel v2.6.12 days.
Update it to the current status, and add a reference for the
linux-next tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- use the correct markup to identify each section;
- Add some blank lines for Sphinx to properly interpret
the markups;
- Remove a blank space on some paragraphs;
- Fix the verbatim and bold markups;
- Cleanup the remaining errors to make Sphinx happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document is almost compliant with ReST notation, but some
small adjustments are needed to make it parse properly by
Sphinx (mostly, add blank lines where needed).
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that the files at Documentation/development-process/
were converted to ReST, make create a book at Sphinx.
As we'll have other books related to the development process,
we'll add it as a sub-book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that the documents were converted, rename them to .rst, as
this is needed by the Sphinx build logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document is on good shape for ReST: all it was needed was
to fix the section markups, add a toctree, convert the tables
and add a few code/quote blocks.
While not strictly required, I opted to use lowercase for
the titles, just like the other books that were converted
to Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we're about to use those two markups, add them to the
theme style overrride.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Starting with sama5d4, the crystal oscillator is always enabled at startup
and the SCKC doesn't have an OSC32EN bit anymore.
Add support for that new controller.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Multi-cpu support is useful to improve the performance of kdump in
some cases. So add the description of enable multi-cpu support in
dump-capture kernel.
Signed-off-by: Zhou Wenjian <zhouwj-fnst@cn.fujitsu.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Xunlei Pang <xpang@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
nr_cpus can help to save memory. So we should remind user of it.
Signed-off-by: Zhou Wenjian <zhouwj-fnst@cn.fujitsu.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Xunlei Pang <xpang@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Move mic/mpssd examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build mic/mpssd. It can be built
from top level directory or from mic/mpssd directory:
Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove networking from Documentation Makefile to move the test to
selftests. Update networking/timestamping Makefile to work under
selftests. These tests will not be run as part of selftests suite
and will not be included in install targets. They can be built and
run separately for now.
This is part of the effort to move runnable code from Documentation.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove watchdog-test from Makefile to move the test to selftests.
Add Makefile and .gitignore for watchdog-test. watchdog-test will
not be run as part of selftests suite and will not be included in
install targets. It can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove ia64 from Makefile to move the test to selftests.
Update ia64 Makefile to work under selftests. ia64 will not be run as part
of selftests suite and will not be included in install targets. They can be
built separately for now.
The original Makefile built this test on all archirectures and this update
doesn't change that.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove vDSO from Makefile to move the to selftests. Update vDSO Makefile
to work under selftests. vDSO will not be run as part of selftests suite
and will not be included in install targets. They can be built separately
for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove ptp from Makefile to move the test to selftests. Update ptp Makefile
to work under selftests. ptp will not be run as part of selftests suite and
will not be included in install targets. They can be built separately for
now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move prctl tests from Documentation/prctl to selftests/prctl.
Remove prctl from Makefile to move the test. Update prctl Makefile to work
under selftests. prctl will not be run as part of selftests suite and will
not be included in install targets. They can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Move dnotify_test.c, Makefile, and .gitignore from Documentation/filesystems
to selftests/filesystems.
Remove filesystems build target from Documentation/Makefile and update
selftests/filesystems/Makefile to work under selftests. dnotify_test will
not be run as part of selftests suite and will not be included in install
targets. It can be built separately for now.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested patch solves two issues:
1) Currently documentation is unclear whether `make kselftest` should
be run before or after kernel was installed and booted. `make help`
gives a clear answer on that: "kselftest - Build and run kernel selftest
(run as root). Build, install, and boot kernel before running kselftest
on it."
2) Documentation states that `make kselftest` executes "unit" tests.
Technically it's not a _unit_ test if it requires to install an
application first. It's either integration or system test. To not to
confuse a user I suggest not to use a word "unit".
Signed-off-by: Aleksander Alekseev <afiskon@devzen.ru>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add some documentation for the 64-bit syscall ABI, which doesn't seem
to be documented elsewhere.
This attempts to document existing practice. The only small discrepancy
is glibc clobbers not quite matching the kernel (e.g., xer, some
vsyscalls trash cr1 whereas glibc only clobbers cr0). These will be
resolved after this document is merged.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- Add initial DTS support for ZTE ZX296718 SoC and ZX296718 EVB board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX22SoAAoJEFBXWFqHsHzOypkIAIj88TKFW6IWuiM+mFwu2Q3X
3sqKB11szxucCd8XYHUQ/wknZX33sDSj63mUbYN20Mb4AbA7u1KG/hR6mBIq3no7
xnIDixq6kIMmt3dY6OEgu3qlkEQnrbopcp7bt3N1QtXNtQazt5WWStSzBwAz1Qsq
QQMUjoOyp3sx3E48HiAmPo2R8oh231w44aKS87YU7IIa3Ld9SyNW6/t8sAAhqvWH
1DLFNgZ968jmbb46BylPSHslMSmjrv1HR+5nZ3zNOQeDcRvLqi7+z9xqhwJUVr08
DXh90RaZNSULHlMWL3lEBLR9KTlca2+08c4ax5YOVeAQjaf+ZUAQUPGod+IBW7M=
=KfUg
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "ZTE arm64 device tree changes for 4.9" from Shawn Guo:
- Add initial DTS support for ZTE ZX296718 SoC and ZX296718 EVB board.
* tag 'zte-dt64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: Add ZTE ZX296718 SoC dts and Makefile
Merge back from docs-next in order to get the cdomain extension.
With such extension, the number of warnings when building docs
in nitpick mode reduced from 22 to 2 warnings.
* docs-next/docs-next:
docs/driver-model: fix typo
DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more
doc-rst:c-domain: function-like macros arguments
doc-rst:c-domain: fix sphinx version incompatibility
Documentation/filesystems: Fixed typo
docs: Don't format internal MPT docs
docs: split up serial-interfaces.rst
docs: Pull the HSI documentation together
docs: Special-case function-pointer parameters in kernel-doc
docs: make kernel-doc handle varargs properly
x86: fix memory ranges in mm documentation
documentation/scsi: Remove nodisconnect parameter
doc: ioctl: Add some clarifications to botching-up-ioctls
docs: split up the driver book
Docs: sphinxify device-drivers.tmpl
This patch removes support for STiH415/6 SoC's from the
st-restart dt binding documentation, as support for these
platforms is being removed from the kernel. It also updates
the dt example to a currently supported platform.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: <linux-pm@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Changeset ab6343956f9c ("[media] V4L2: Add documentation for SDI timings
and related flags") added documentation for new V4L2 defines, but
it forgot to update videodev2.h.rst.exceptions to point to where
the documentation for those new values will be inside the book,
causing those warnings:
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-bt-std-sdi (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-fl-first-field-extra-line (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-v-lock (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-std-lock (if the link has no caption the label must precede a section header)
Fixes: ab6343956f9c ("[media] V4L2: Add documentation for SDI timings and related flags")
Cc: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for the kernel parameter nfs.callback_nr_threads to set
the number of threads that will be assigned to the callback channel.
Add support for the kernel parameter nfs.nfs.max_session_cb_slots
to set the maximum size of the callback channel slot table.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=DlpW
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late
Pull "Amlogic driver updates for v4.9, 2nd round" from Kevin Hilman:
- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates
* tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (21 commits)
clk: gxbb: expose i2c clocks
clk: gxbb: expose USB clocks
clk: gxbb: expose spifc clock
clk: gxbb: expose MPLL2 clock for use by DT
Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
usb: dwc2: add support for Meson8b and GXBB SoCs
net: stmmac: update the module description of the dwmac-meson driver
net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
stmmac: introduce get_stmmac_bsp_priv() helper
net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
clk: meson-gxbb: Export PWM related clocks for DT
meson: clk: Add support for clock gates
gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b
clk: meson: Copy meson8b CLKID defines to private header file
meson: clk: Rename register names according to Amlogic datasheet
meson: clk: Move register definitions to meson8b.h
clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention
nvmem: amlogic: Add Amlogic Meson EFUSE driver
firmware: Amlogic: Add secure monitor driver
media: rc: meson-ir: Add support for newer versions of the IR decoder
...
Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NN8A
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski:
Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.
* tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s3c64xx: Use macros for pinctrl configuration
ARM: dts: s3c2416: Use macros for pinctrl configuration
ARM: dts: s5pv210: Use macros for pinctrl configuration
ARM: dts: s3c64xx: Use common macros for pinctrl configuration
ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415
ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210
ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260
ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12
ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210
ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250
ARM: dts: exynos: Use common macros for pinctrl configuration
pinctrl: dt-bindings: samsung: Update documentation with new macros
pinctrl: dt-bindings: samsung: Add header with values used for configuration
1. Allow compile testing of exynos-mct clocksource driver on ARM64.
2. Document Exynos5433 PMU compatible (already used by clkout driver and more
will be coming soon).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WOAL
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "Samsung drivers/soc update for v4.9" from Krzysztof Kozlowski:
1. Allow compile testing of exynos-mct clocksource driver on ARM64.
2. Document Exynos5433 PMU compatible (already used by clkout driver and more
will be coming soon).
* tag 'samsung-drivers-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
clocksource: exynos_mct: Add the support for ARM64
Rafael J. Wysocki