mirror of https://gitee.com/openkylin/linux.git
58491 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
6c90bbd0a4 |
USB fixes for 5.4-rc3
Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXaH78w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yk7mACgygFyLQ6GRUTTnGDcohZu44cuMO4AnR/MTrRq /jiXPRUMsltMV7DHcq+S =QX4p -----END PGP SIGNATURE----- Merge tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a lot of small USB driver fixes for 5.4-rc3. syzbot has stepped up its testing of the USB driver stack, now able to trigger fun race conditions between disconnect and probe functions. Because of that we have a lot of fixes in here from Johan and others fixing these reported issues that have been around since almost all time. We also are just deleting the rio500 driver, making all of the syzbot bugs found in it moot as it turns out no one has been using it for years as there is a userspace version that is being used instead. There are also a number of other small fixes in here, all resolving reported issues or regressions. All have been in linux-next without any reported issues" * tag 'usb-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (65 commits) USB: yurex: fix NULL-derefs on disconnect USB: iowarrior: use pr_err() USB: iowarrior: drop redundant iowarrior mutex USB: iowarrior: drop redundant disconnect mutex USB: iowarrior: fix use-after-free after driver unbind USB: iowarrior: fix use-after-free on release USB: iowarrior: fix use-after-free on disconnect USB: chaoskey: fix use-after-free on release USB: adutux: fix use-after-free on release USB: ldusb: fix NULL-derefs on driver unbind USB: legousbtower: fix use-after-free on release usb: cdns3: Fix for incorrect DMA mask. usb: cdns3: fix cdns3_core_init_role() usb: cdns3: gadget: Fix full-speed mode USB: usb-skeleton: drop redundant in-urb check USB: usb-skeleton: fix use-after-free after driver unbind USB: usb-skeleton: fix NULL-deref on disconnect usb:cdns3: Fix for CV CH9 running with g_zero driver. usb: dwc3: Remove dev_err() on platform_get_irq() failure usb: dwc3: Switch to platform_get_irq_byname_optional() ... |
|
|
Linus Torvalds
|
fb20da6af7 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu: "Fix build issues in arm/aes-ce" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm/aes-ce - add dependency on AES library crypto: arm/aes-ce - build for v8 architecture explicitly |
|
|
Linus Torvalds
|
43b815c6a8 |
ARM: SoC fixes
A few fixes this time around:
- Fixup of some clock specifications for DRA7 (device-tree fix)
- Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
warnings at boot
- A few more minor fixups for OMAPs, most around display
- Enable STM32 QSPI as =y since their rootfs sometimes comes from
there
- Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool
- Fix of thermal zone definition for ux500 (5.4 regression)
-----BEGIN PGP SIGNATURE-----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=+lB0
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes this time around:
- Fixup of some clock specifications for DRA7 (device-tree fix)
- Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
warnings at boot
- A few more minor fixups for OMAPs, most around display
- Enable STM32 QSPI as =y since their rootfs sometimes comes from
there
- Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool
- Fix of thermal zone definition for ux500 (5.4 regression)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
ARM: dts: ux500: Fix up the CPU thermal zone
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
ARM: dts: am4372: Set memory bandwidth limit for DISPC
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
ARM: dts: Fix wrong clocks for dra7 mcasp
clk: ti: dra7: Fix mcasp8 clock bits
|
|
|
Linus Torvalds
|
50dfd03d95 |
xen: fixes and cleanups for 5.4-rc2
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXZbQhwAKCRCAXGG7T9hj vh03AP9mOLNY8r16u6a+Iy0YVccTaeiQiquG6HgFVEGX2Ki38gD/Xf5u6bPRYBts uSRL/eYDvtfU4YGGMjogn20Fdzhc5Ak= =EkVp -----END PGP SIGNATURE----- Merge tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks |
|
|
Patrice Chotard
|
60c1b3e257 |
ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
SPI_STM32_QSPI must be set in buildin as rootfs can be located on QSPI memory device. Link: https://lore.kernel.org/r/20191004124025.17394-1-patrice.chotard@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Maxime Ripard
|
e6064cf4da |
ARM: dts: sunxi: Revert phy-names removal for ECHI and OHCI
This reverts commits |
|
|
Bastien Nocera
|
015664d152 |
USB: rio500: Remove Rio 500 kernel driver
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.
Support for the kernel driver was removed from the upstream utilities
in 2008:
|
|
|
Olof Johansson
|
bcec1221c9 |
Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+ CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd ZkiGMxkpLUY= =SkMF -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Juergen Gross
|
0951570685 |
xen/efi: have a common runtime setup function
Today the EFI runtime functions are setup in architecture specific code (x86 and arm), with the functions themselves living in drivers/xen as they are not architecture dependent. As the setup is exactly the same for arm and x86 move the setup to drivers/xen, too. This at once removes the need to make the single functions global visible. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> [boris: "Dropped EXPORT_SYMBOL_GPL(xen_efi_runtime_setup)"] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> |
|
|
Peng Fan
|
ec066de1a5 |
arm: xen: mm: use __GPF_DMA32 for arm64
arm64 shares some code under arch/arm/xen, including mm.c.
However ZONE_DMA is removed by commit
ad67f5a6545("arm64: replace ZONE_DMA with ZONE_DMA32").
So add a check if CONFIG_ZONE_DMA32 is enabled use __GFP_DMA32.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
|
Stefano Stabellini
|
ade77a2da8 |
ARM: xen: unexport HYPERVISOR_platform_op function
HYPERVISOR_platform_op() is an inline function and should not be exported. Since commit |
|
|
Linus Walleij
|
cdee3b60af |
ARM: dts: ux500: Fix up the CPU thermal zone
This fixes up the default ux500 CPU thermal zone:
- Set polling delay to 0 and explain why
- Set passive polling delay to 250
- Remove restrictions from the CPU cooling device,
we should use all cpufreq steps to cool down if
needed.
Link: https://lore.kernel.org/r/20191001074628.8122-1-linus.walleij@linaro.org
Fixes:
|
|
|
Ard Biesheuvel
|
f703964fc6 |
crypto: arm/aes-ce - add dependency on AES library
The ARM accelerated AES driver depends on the new AES library for its non-SIMD fallback so express this in its Kconfig declaration. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
|
|
Ard Biesheuvel
|
3aa6d4abd4 |
crypto: arm/aes-ce - build for v8 architecture explicitly
The NEON/Crypto Extensions based AES implementation for 32-bit ARM can be built in a kernel that targets ARMv6 CPUs and higher, even though the actual code will not be able to run on that generation, but it allows for a portable image to be generated that can will use the special instructions only when they are available. Since those instructions are part of a FPU profile rather than a CPU profile, we don't override the architecture in the assembler code, and most of the scalar code is simple enough to be ARMv6 compatible. However, that changes with commit |
|
|
Ross Lagerwall
|
df359f0d09 |
xen/efi: Set nonblocking callbacks
Other parts of the kernel expect these nonblocking EFI callbacks to exist and crash when running under Xen. Since the implementations of xen_efi_set_variable() and xen_efi_query_variable_info() do not take any locks, use them for the nonblocking callbacks too. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
|
|
Keerthy
|
a304c0a602 |
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
Commit |
|
|
Linus Torvalds
|
cef0aa0ce8 |
ARM: SoC fixes
A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl2Q+QsPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx36yIP/2eeqmdd97XJUiX2qGlKlDC+AtVUJnnxzhLa jSAIbbN74MCVH3M0BW1ECPbHHXFR54sffLFWwu8rVBr5nRdNPt0xLdXiVJcIVMfr by0LeMAOcw9CDxKsLqwwAagKq4HVnwqbZ+RVC3CjGz+Sp+vvSz+T/Ta6GzblASYv 3zOs1FD+e4pwDqonyp6P5vAlBQ6qFL7AVZFPpNmXsqIzcT1bGEj/RwReErCIoevL 7ZJr1R69D5IaEXYwWt8dT7bNwMR0gRvskrCQVCCBBcwHkO1PRd6cTXQ9EFBG8LgV LCM9F8Z+6QMigqvDFgSMpIz6orhKQKGpHF7K023c4DKBVqwigT/CaTOZgFr74pUJ Zp7s2dFcmJo1J2HlYDz3Nde4BFJXy3gNJphD7yI9xMfBNe1EXclvqtqICvnpMpgt thDXrReyDhMQukOBlrUcMxABP/EK97fULpC2Z2kaBq3SbnZILAOKFKtISmh5o6eI s4+QYETaqnWjYJE9d+YYg0VwNAifSzplSrGJVK43mGpqpQRx49cw25vL8bV/ZRgg HMTUX97Oho+EgDC9BWiahe0TZaWBBGJ3hWI/mrBW/dNowxoHp3l/fCcLdBPPKltS qo4BbbKPdrgq5o3YRBSjftdnbJ8eE9DTRs1sAsDQeNb9XJih9aiAQE3hxAA9wdJO vcRFcZ1Q =s4qF -----END PGP SIGNATURE----- Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks |
|
|
Peter Ujfalusi
|
f90ec6cdf6 |
ARM: dts: am4372: Set memory bandwidth limit for DISPC
Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions. am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Olof Johansson
|
9bfd7319e8 |
Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Mark Rutland
|
b4ed71f557 |
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.
To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().
These changes were generated with the following shell script:
----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----
... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.
There should be no functional change as a result of this patch.
Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Tony Lindgren
|
cf395f7ddb |
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
This code is currently unable to find the dts opp tables as ti-cpufreq
needs to set them up first based on speed binning.
We stopped initializing the opp tables with platform code years ago for
device tree based booting with commit
|
|
|
Tony Lindgren
|
17529d43b2 |
ARM: OMAP2+: Add missing LCDC midlemode for am335x
TRM "Table 13-34. SYSCONFIG Register Field Descriptions" lists both
standbymode and idlemode that should be just the sidle and midle
registers where midle is currently unconfigured for lcdc_sysc. As
the dts data has been generated based on lcdc_sysc, we now have an
empty "ti,sysc-midle" property.
And so we currently get a warning for lcdc because of a difference
with dts provided configuration compared to the legacy platform
data. This is because lcdc has SYSC_HAS_MIDLEMODE configured in
the platform data without configuring the modes.
Let's fix the issue by adding the missing midlemode to lcdc_sysc,
and configuring the "ti,sysc-midle" property based on the TRM
values.
Fixes:
|
|
|
Tony Lindgren
|
8ad8041b98 |
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
For ti,sysc-omap4 compatible devices with no sysstatus register, we do have reset done status available in the SOFTRESET bit that clears when the reset is done. This is documented for example in am437x TRM for DMTIMER_TIOCP_CFG register. The am335x TRM just says that SOFTRESET bit value 1 means reset is ongoing, but it behaves the same way clearing after reset is done. With the ti-sysc driver handling this automatically based on no sysstatus register defined, we see warnings if SYSC_HAS_RESET_STATUS is missing in the legacy platform data: ti-sysc 48042000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48044000.target-module: sysc_flags 00000222 != 00000022 ti-sysc 48046000.target-module: sysc_flags 00000222 != 00000022 ... Let's fix these warnings by adding SYSC_HAS_RESET_STATUS. Let's also remove the useless parentheses while at it. If it turns out we do have ti,sysc-omap4 compatible devices without a working SOFTRESET bit we can set up additional quirk handling for it. Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Linus Torvalds
|
9c9fa97a8e |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ... |
|
|
Alexandre Ghiti
|
dba79c3df4 |
arm: use generic mmap top-down layout and brk randomization
arm uses a top-down mmap layout by default that exactly fits the generic functions, so get rid of arch specific code and use the generic version by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT. As ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT selects ARCH_HAS_ELF_RANDOMIZE, use the generic version of arch_randomize_brk since it also fits. Note that this commit also removes the possibility for arm to have elf randomization and no MMU: without MMU, the security added by randomization is worth nothing. Note that it is safe to remove STACK_RND_MASK since it matches the default value. Link: http://lkml.kernel.org/r/20190730055113.23635-9-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alexandre Ghiti
|
86e568e9c0 |
arm: use STACK_TOP when computing mmap base address
mmap base address must be computed wrt stack top address, using TASK_SIZE is wrong since STACK_TOP and TASK_SIZE are not equivalent. Link: http://lkml.kernel.org/r/20190730055113.23635-8-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Alexandre Ghiti
|
af0f429728 |
arm: properly account for stack randomization and stack guard gap
This commit takes care of stack randomization and stack guard gap when computing mmap base address and checks if the task asked for randomization. This fixes the problem uncovered and not fixed for arm here: https://lkml.kernel.org/r/20170622200033.25714-1-riel@redhat.com Link: http://lkml.kernel.org/r/20190730055113.23635-7-alex@ghiti.fr Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: James Hogan <jhogan@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Mike Rapoport
|
782de70c42 |
mm: consolidate pgtable_cache_init() and pgd_cache_init()
Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem cache for page table allocations on several architectures that do not use PAGE_SIZE tables for one or more levels of the page table hierarchy. Most architectures do not implement these functions and use __weak default NOP implementation of pgd_cache_init(). Since there is no such default for pgtable_cache_init(), its empty stub is duplicated among most architectures. Rename the definitions of pgd_cache_init() to pgtable_cache_init() and drop empty stubs of pgtable_cache_init(). Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> [arm64] Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nicholas Piggin
|
13224794cb |
mm: remove quicklist page table caches
Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Matthew Wilcox (Oracle)
|
d8c6546b1a |
mm: introduce compound_nr()
Replace 1 << compound_order(page) with compound_nr(page). Minor improvements in readability. Link: http://lkml.kernel.org/r/20190721104612.19120-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Matthew Wilcox (Oracle)
|
a50b854e07 |
mm: introduce page_size()
Patch series "Make working with compound pages easier", v2. These three patches add three helpers and convert the appropriate places to use them. This patch (of 3): It's unnecessarily hard to find out the size of a potentially huge page. Replace 'PAGE_SIZE << compound_order(page)' with page_size(page). Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Tony Lindgren
|
4ef5d76b45 |
ARM: dts: Fix gpio0 flags for am335x-icev2
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:
dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init
Fixes:
|
|
|
Linus Torvalds
|
299d14d4c3 |
pci-v5.4-changes
-----BEGIN PGP SIGNATURE-----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=/xB3
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
(Krzysztof Wilczynski)
- Fix incorrect PCIe device types and remove dev->has_secondary_link
to simplify code that deals with upstream/downstream ports (Mika
Westerberg)
- After suspend, restore Resizable BAR size bits correctly for 1MB
BARs (Sumit Saxena)
- Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)
Virtualization:
- Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
Labs (Ali Saidi)
- Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)
- Remove group write permissions from sysfs sriov_numvfs,
sriov_drivers_autoprobe (Kelsey Skunberg)
Hotplug:
- Simplify pciehp indicator control (Denis Efremov)
Peer-to-peer DMA:
- Allow P2P DMA between root ports for whitelisted bridges (Logan
Gunthorpe)
- Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)
- DMA map P2P DMA requests that traverse host bridge (Logan
Gunthorpe)
Amazon Annapurna Labs host bridge driver:
- Add DT binding and controller driver (Jonathan Chocron)
Hyper-V host bridge driver:
- Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)
- Fix PCI domain number collisions (Haiyang Zhang)
- Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)
- Fix build errors on non-SYSFS config (Randy Dunlap)
i.MX6 host bridge driver:
- Limit DBI register length (Stefan Agner)
Intel VMD host bridge driver:
- Fix config addressing issues (Jon Derrick)
Layerscape host bridge driver:
- Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)
- Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
(Xiaowei Bao)
Mediatek host bridge driver:
- Add MT7629 controller support (Jianjun Wang)
Mobiveil host bridge driver:
- Fix CPU base address setup (Hou Zhiqiang)
- Make "num-lanes" property optional (Hou Zhiqiang)
Tegra host bridge driver:
- Fix OF node reference leak (Nishka Dasgupta)
- Disable MSI for root ports to work around design problem (Vidya
Sagar)
- Add Tegra194 DT binding and controller support (Vidya Sagar)
- Add support for sideband pins and slot regulators (Vidya Sagar)
- Add PIPE2UPHY support (Vidya Sagar)
Misc:
- Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)
- Unexport pci_bus_get(), etc (Kelsey Skunberg)
- Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
the PCI core (Kelsey Skunberg)
- Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)
- Mark expected switch fall-through (Gustavo A. R. Silva)
- Propagate errors for optional regulators and PHYs (Thierry Reding)
- Fix kernel command line resource_alignment parameter issues (Logan
Gunthorpe)"
* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
arm64: tegra: Add configuration for PCIe C5 sideband signals
PCI: tegra: Add support to enable slot regulators
PCI: tegra: Add support to configure sideband pins
PCI: vmd: Fix shadow offsets to reflect spec changes
PCI: vmd: Fix config addressing when using bus offsets
PCI: dwc: Add validation that PCIe core is set to correct mode
PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
PCI: Add ACS quirk for Amazon Annapurna Labs root ports
PCI: Add Amazon's Annapurna Labs vendor ID
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
dt-bindings: PCI: tegra: Add sideband pins configuration entries
PCI: tegra: Add Tegra194 PCIe support
PCI: Get rid of dev->has_secondary_link flag
...
|
|
|
Tony Lindgren
|
1d70ded856 |
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
Droid4 needs USB option serial driver for modem, and lm3532 for the LCD backlight. Note that the LCD backlight does not yet get enabled automatically, but needs to be done manually with: # echo 50 > /sys/class/leds/lm3532::backlight/brightness Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Adam Ford
|
04e0e1777a |
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
The TFP410 driver was removed but the replacement driver was
never enabled. This patch enableds the DRM_TI_TFP410
Fixes:
|
|
|
Tony Lindgren
|
c01f5120ca | Merge branch 'fixes-merge-window-pt2' into fixes | |
|
H. Nikolaus Schaller
|
f1f028ff89 |
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
commit
|
|
|
Tony Lindgren
|
2d3c8ba3cf |
ARM: dts: Fix wrong clocks for dra7 mcasp
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7.
This causes the following warning on beagle-x15:
ti-sysc 48468000.target-module: could not add child clock ahclkr: -19
Also the mcasp clkctrl clock bits are wrong:
For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0:
bit 28 is ahclkr
bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck
For mcasp3 to 8 we have three clocks at bits 24, 22 and 0.
bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck
We do not have currently mapped auxclk at bit 22 for the drivers, that can
be added if needed.
Fixes:
|
|
|
Linus Torvalds
|
8808cf8cbc |
ARM updates for 5.4-rc1:
- fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAXYZCdvTnkBvkraxkAQK7vQ//UO0XJ1InSLnWzPYuNwJGcCmzHIg6p40A VxnvDTVxZH6UKDhBg8xx+gpPOhwZElGyc0H563p5jgmjzbIesESS5Xy3hUUMkQ9y A6Ta9Nk+NhL+j9O9VtcOk90oQJsLuVyYtHTfk6Wl9xaVLjM1OALWNzCSDqXIPTjF qEhTRahlv9Nc9aisFJAPduf/zQx9ULaZVvDzTo6clXSD7ieSy0MZRiRbcH3MJwiY Q5AbImF49NGcNtlknPh8Gnz/4P3q+bxQDmrzki9d4Fcy2brko845q9Ca5PC+iXro fZHvs8q2+8xz4PuOddBrYebqPIIv+3W6uPlJAPjO0MQrxPTUxRBxqAkYXxwTZBx/ A79AQsbnmUSyOV4EI2lk9USmN/GF2QwGOusRoiA/XMbSVfqnVZWH5mE98dr+2vn+ rUnTq9yvSz2y6QH7+UI+7Q7T8jg4QFBBmPDfCP+yTOWqPb8u070h+VgLBr28g1JL t6VtzOeI4wyl7E/WInmoM/d8SXnjv/1yNzLBcCdvgBV94fUQAV5EP+cDGJ0hv1SJ TGywm8adf3zAa7ZUAOhBoAK3gkNqjJB28ynsH4QmBUmsKkozxoKwwb4jjbGgcoUY rYII4VyoQB/0eX5/i8u69krA+3QNRhehLWC/zM4ZK5lKfFRCnNDvLgiIEM5b59JW nBywRtpyw2I= =Evmc -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ... |
|
|
Linus Torvalds
|
f97c81dc6c |
ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
that had complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the most
interesting new additions:
The new Aspeed AST2600 baseboard management controller is added, this
is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
dependencies on other device drivers.
After many years, support for the MMP2 based OLPC XO-1.75 finally makes
it into the kernel.
The Armada 3720 based Turris Mox open source router platform is a late
addition and it follows some preparatory work across multiple branches.
The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of the
now-unused platform data.
The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Qtkp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann:
"This is some material that we picked up into our tree late or that had
complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the
most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added,
this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally
makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a
late addition and it follows some preparatory work across multiple
branches.
- The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of
the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but
I waited on the branches that it used to be pulled first, so it ends
up being merged much later than the other ARM SoC pull requests this
merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
ARM: dts: dir685: Drop spi-cpol from the display
ARM: dts: aspeed: Add AST2600 pinmux nodes
ARM: dts: aspeed: Add AST2600 and EVB
ARM: exynos: Enable support for ARM architected timers
ARM: samsung: Fix system restart on S3C6410
ARM: dts: mmp2: add OLPC XO 1.75 machine
ARM: dts: mmp2: rename the USB PHY node
ARM: dts: mmp2: specify reg-shift for the UARTs
ARM: dts: mmp2: add camera interfaces
ARM: dts: mmp2: fix the SPI nodes
ARM: dts: mmp2: trivial whitespace fix
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
...
|
|
|
Linus Torvalds
|
d7b0827f28 |
Kbuild updates for v5.4
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build
in unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=VGqV
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- add modpost warn exported symbols marked as 'static' because 'static'
and EXPORT_SYMBOL is an odd combination
- break the build early if gold linker is used
- optimize the Bison rule to produce .c and .h files by a single
pattern rule
- handle PREEMPT_RT in the module vermagic and UTS_VERSION
- warn CONFIG options leaked to the user-space except existing ones
- make single targets work properly
- rebuild modules when module linker scripts are updated
- split the module final link stage into scripts/Makefile.modfinal
- fix the missed error code in merge_config.sh
- improve the error message displayed on the attempt of the O= build in
unclean source tree
- remove 'clean-dirs' syntax
- disable -Wimplicit-fallthrough warning for Clang
- add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC
- remove ARCH_{CPP,A,C}FLAGS variables
- add $(BASH) to run bash scripts
- change *CFLAGS_<basetarget>.o to take the relative path to $(obj)
instead of the basename
- stop suppressing Clang's -Wunused-function warnings when W=1
- fix linux/export.h to avoid genksyms calculating CRC of trimmed
exported symbols
- misc cleanups
* tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits)
genksyms: convert to SPDX License Identifier for lex.l and parse.y
modpost: use __section in the output to *.mod.c
modpost: use MODULE_INFO() for __module_depends
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
export.h: remove defined(__KERNEL__), which is no longer needed
kbuild: allow Clang to find unused static inline functions for W=1 build
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
kbuild: refactor scripts/Makefile.extrawarn
merge_config.sh: ignore unwanted grep errors
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
modpost: add NOFAIL to strndup
modpost: add guid_t type definition
kbuild: add $(BASH) to run scripts with bash-extension
kbuild: remove ARCH_{CPP,A,C}FLAGS
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
kbuild: clean up subdir-ymn calculation in Makefile.clean
kbuild: remove unneeded '+' marker from cmd_clean
kbuild: remove clean-dirs syntax
kbuild: check clean srctree even earlier
...
|
|
|
Arnd Bergmann
|
b74d957f63 |
ARM: aspeed: ast2500 is ARMv6K
Linux supports both the original ARMv6 level (early ARM1136) and ARMv6K
(later ARM1136, ARM1176 and ARM11mpcore).
ast2500 falls into the second categoy, being based on arm1176jzf-s.
This is enabled by default when using ARCH_MULTI_V6, so we should
not 'select CPU_V6'.
Removing this will lead to more efficient use of atomic instructions.
Fixes:
|
|
|
Linus Torvalds
|
671df18953 |
dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
-----BEGIN PGP SIGNATURE-----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=/wGv
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- add dma-mapping and block layer helpers to take care of IOMMU merging
for mmc plus subsequent fixups (Yoshihiro Shimoda)
- rework handling of the pgprot bits for remapping (me)
- take care of the dma direct infrastructure for swiotlb-xen (me)
- improve the dma noncoherent remapping infrastructure (me)
- better defaults for ->mmap, ->get_sgtable and ->get_required_mask
(me)
- cleanup mmaping of coherent DMA allocations (me)
- various misc cleanups (Andy Shevchenko, me)
* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
mmc: queue: Fix bigger segments usage
arm64: use asm-generic/dma-mapping.h
swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
swiotlb-xen: simplify cache maintainance
swiotlb-xen: use the same foreign page check everywhere
swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
xen: remove the exports for xen_{create,destroy}_contiguous_region
xen/arm: remove xen_dma_ops
xen/arm: simplify dma_cache_maint
xen/arm: use dev_is_dma_coherent
xen/arm: consolidate page-coherent.h
xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
arm: remove wrappers for the generic dma remap helpers
dma-mapping: introduce a dma_common_find_pages helper
dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
vmalloc: lift the arm flag for coherent mappings to common code
dma-mapping: provide a better default ->get_required_mask
dma-mapping: remove the dma_declare_coherent_memory export
remoteproc: don't allow modular build
...
|
|
|
Linus Torvalds
|
8b53c76533 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Add the ability to abort a skcipher walk. Algorithms: - Fix XTS to actually do the stealing. - Add library helpers for AES and DES for single-block users. - Add library helpers for SHA256. - Add new DES key verification helper. - Add surrounding bits for ESSIV generator. - Add accelerations for aegis128. - Add test vectors for lzo-rle. Drivers: - Add i.MX8MQ support to caam. - Add gcm/ccm/cfb/ofb aes support in inside-secure. - Add ofb/cfb aes support in media-tek. - Add HiSilicon ZIP accelerator support. Others: - Fix potential race condition in padata. - Use unbound workqueues in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits) crypto: caam - Cast to long first before pointer conversion crypto: ccree - enable CTS support in AES-XTS crypto: inside-secure - Probe transform record cache RAM sizes crypto: inside-secure - Base RD fetchcount on actual RD FIFO size crypto: inside-secure - Base CD fetchcount on actual CD FIFO size crypto: inside-secure - Enable extended algorithms on newer HW crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL crypto: inside-secure - Add EIP97/EIP197 and endianness detection padata: remove cpu_index from the parallel_queue padata: unbind parallel jobs from specific CPUs padata: use separate workqueues for parallel and serial work padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible crypto: pcrypt - remove padata cpumask notifier padata: make padata_do_parallel find alternate callback CPU workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs workqueue: unconfine alloc/apply/free_workqueue_attrs() padata: allocate workqueue internally arm64: dts: imx8mq: Add CAAM node random: Use wait_event_freezable() in add_hwgenerator_randomness() crypto: ux500 - Fix COMPILE_TEST warnings ... |
|
|
Linus Torvalds
|
c6b48dad92 |
USB changes for 5.4-rc1
Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIYYQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymn8ACfTi8Y2ku/yqw8Nvs4vQjc08MUDhgAoNnbhsI6 H3HUrZTjJJzuxHCM22Lh =8ZRm -----END PGP SIGNATURE----- Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ... |
|
|
Linus Torvalds
|
fe38bd6862 |
* s390: ioctl hardening, selftests
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
and bugfixes
* PPC: various minor fixes and preparation
* x86: bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT), some IPI optimizations
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
=w6I3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- ioctl hardening
- selftests
ARM:
- ITS translation cache
- support for 512 vCPUs
- various cleanups and bugfixes
PPC:
- various minor fixes and preparation
x86:
- bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT)
- some IPI optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
KVM: X86: Use IPI shorthands in kvm guest when support
KVM: x86: Fix INIT signal handling in various CPU states
KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
KVM: VMX: Stop the preemption timer during vCPU reset
KVM: LAPIC: Micro optimize IPI latency
kvm: Nested KVM MMUs need PAE root too
KVM: x86: set ctxt->have_exception in x86_decode_insn()
KVM: x86: always stop emulation on page fault
KVM: nVMX: trace nested VM-Enter failures detected by H/W
KVM: nVMX: add tracepoint for failed nested VM-Enter
x86: KVM: svm: Fix a check in nested_svm_vmrun()
KVM: x86: Return to userspace with internal error on unexpected exit reason
KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
doc: kvm: Fix return description of KVM_SET_MSRS
KVM: X86: Tune PLE Window tracepoint
KVM: VMX: Change ple_window type to unsigned int
KVM: X86: Remove tailing newline for tracepoints
KVM: X86: Trace vcpu_id for vmexit
KVM: x86: Manually calculate reserved bits when loading PDPTRS
...
|
|
|
Linus Torvalds
|
e7345f92c2 |
media updates for v5.4-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl1/essACgkQCF8+vY7k 4RV4YQ/+IILxwEuXn6cU2H/ss2+6QmOdOYISGDniWRQGTE9NN4AuvF7jv3qxek5o FqisJXFJWCzpO7+LpKomAQXweWmVGaSV99QSJhRUyM0lNIrXD+rACO77yYL5ZwSX r5REvk+ykozgRrQrWpiHCGOyH08Kt/LO/jA29VaJokX6yX4w0xvRc0rUBe2OlL+K rcaXDnVw8SloVpyDaMY0DDqP8v0iGsUufTxFwAoskL36+qudXgunrg1yoNwmvTL+ spxLFs/I2LBIuBdvSg5W+FmwC3YnMdE/BDiaor9jKvhqUT9hOIozZ+pNmVTEsfvk 1FdTobf2mhvzmJrn4bdQSfFb7BiDNgMuf6/IpeRJqQSpQHzyHQhVGBG8h3axSOhM 5QWHBqrA0MAhcwVsKBUKj+mcfg7uNxtGPqmoeSVlMz+LH1hhokNWTAq5p2FgiDh8 wrSsZyJItHg2hbXPkWP9EgA40Q/xzwsvUCvoz0/+dCd08DwIeSi2HIQbNddxg7y8 NllZY0o4h6ETeDIfQb6k3zrRnAqOwlxxvXIMlaGanYegZBXMltiBIqiWrUG1qQh5 CrBTAE28vBCNNTxQJyEjut6H5/RpWEFwebcUkn1BkeUAPZ1w72+LTJ/obekiC0/6 Dxv7VvoTG+UFO14Fz7L3lYYTK2+OGvAsuXHAhQgrW5bWfmm8Cog= =QTT+ -----END PGP SIGNATURE----- Merge tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new sensor driver for ov5675 - a new platform driver for Allwinner A10 sensor interface - some new remote controller keymaps - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to merge two core modules into one - removal of bcm2048 radio driver from staging - removal of davinci_vpfe video driver from staging - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1 core - added some documentation for remote controller protocols - pixel format documentation was split on two files - lots of other driver improvements and cleanups * tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits) media: videobuf-core.c: poll_wait needs a non-NULL buf pointer media: sun4i: Make sun4i_csi_formats static media: imx: remove unused including <linux/version.h> media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe() media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code media: em28xx: Fix exception handling in em28xx_alloc_urbs() media: don't do a 31 bit shift on a signed int media: use the BIT() macro media: ov9650: add a sanity check media: aspeed-video: address a protential usage of an unitialized var media: vicodec: make life easier for static analyzers media: remove include stdarg.h from some drivers v4l2-core: fix coding style for the two new c files media: v4l2-core: Remove BUG() from i2c and spi helpers media: v4l2-core: introduce a helper to unregister a i2c subdev media: v4l2-core: introduce a helper to unregister a spi subdev media: v4l2-core: move i2c helpers out of v4l2-common.c media: v4l2-core: move spi helpers out of v4l2-common.c media: v4l2-core: Module re-organization media: usbvision: Remove dead code ... |
|
|
Linus Torvalds
|
6ab8ad3160 |
sound updates for 5.4
As shown in diffstat and logs, it was again a busy development
cycle at this time, too. The most significant changes are still
on-going refactoring / modernization works for ASoC core and
drivers, but there are lots of other changes as well. Here we go,
some highlights below:
ASoC:
- Quite lots of cleanup / refactoring of ASoC core and APIs;
most of them are systematic, but also including cleanups and
modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically falling
back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a bit
experimental
FireWire:
- Lots of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----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=/+1Q
-----END PGP SIGNATURE-----
Merge tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As shown in diffstat and logs, it was again a busy development cycle
at this time, too. The most significant changes are still on-going
refactoring / modernization works for ASoC core and drivers, but there
are lots of other changes as well. Here we go, some highlights below:
ASoC:
- Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
them are systematic, but also including cleanups and modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically
falling back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a
bit experimental
FireWire:
- Lots of code refactoring and cleanups"
* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
ASoC: sdm845: remove unneeded semicolon
ASoC: fsl_sai: Implement set_bclk_ratio
ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
ASoC: wcd9335: remove redundant use of ret variable
ALSA: firewire-tascam: check intermediate state of clock status and retry
ALSA: firewire-tascam: handle error code when getting current source of clock
ASoC: hdmi-codec: Add an op to set callback function for plug event
ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
ASoC: rt5677: Remove magic number register writes
ASoC: soc-core: self contained soc_unbind_aux_dev()
ASoC: soc-core: add soc_unbind_aux_dev()
ASoC: soc-core: self contained soc_bind_aux_dev()
ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
ASoC: soc-core: self contained soc_probe_link_dais()
ASoC: soc-core: add new soc_link_init()
ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
ASoC: soc-core: self contained soc_remove_link_dais()
ASoC: soc-core: self contained soc_remove_link_components()
ASoC: soc-core: self contained soc_probe_link_components()
ASoC: rt1308: make array pd static const, makes object smaller
...
|
|
|
Linus Torvalds
|
a572ba6329 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
"Updates from the irq departement:
- Update the interrupt spreading code so it handles numa node with
different CPU counts properly.
- A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
ranges.
- Conversion of all alloc_fwnode() users to use physical addresses
instead of virtual addresses so the virtual addresses are not
leaked. The physical address is sufficient to identify the
associated interrupt chip.
- Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.
- Enforce interrupt threading at compile time if RT is enabled.
- Small updates and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
irqdomain: Add the missing assignment of domain->fwnode for named fwnode
irqchip/mmp: Coexist with GIC root IRQ controller
irqchip/mmp: Mask off interrupts from other cores
irqchip/mmp: Add missing chained_irq_{enter,exit}()
irqchip/mmp: Do not use of_address_to_resource() to get mux regs
irqchip/meson-gpio: Add support for meson sm1 SoCs
dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
genirq/affinity: Remove const qualifier from node_to_cpumask argument
genirq/affinity: Spread vectors on node according to nr_cpu ratio
genirq/affinity: Improve __irq_build_affinity_masks()
irqchip: Remove dev_err() usage after platform_get_irq()
irqchip: Add include guard to irq-partition-percpu.h
irqchip/mmp: Do not call irq_set_default_host() on DT platforms
irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
irqchip/gic-v3: Add EPPI range support
...
|
|
|
Linus Torvalds
|
94d18ee934 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"This cycle's RCU changes were:
- A few more RCU flavor consolidation cleanups.
- Updates to RCU's list-traversal macros improving lockdep usability.
- Forward-progress improvements for no-CBs CPUs: Avoid ignoring
incoming callbacks during grace-period waits.
- Forward-progress improvements for no-CBs CPUs: Use ->cblist
structure to take advantage of others' grace periods.
- Also added a small commit that avoids needlessly inflicting
scheduler-clock ticks on callback-offloaded CPUs.
- Forward-progress improvements for no-CBs CPUs: Reduce contention on
->nocb_lock guarding ->cblist.
- Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
list to further reduce contention on ->nocb_lock guarding ->cblist.
- Miscellaneous fixes.
- Torture-test updates.
- minor LKMM updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
rcu: Don't include <linux/ktime.h> in rcutiny.h
rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
rcu/nocb: Add bypass callback queueing
rcu/nocb: Atomic ->len field in rcu_segcblist structure
rcu/nocb: Unconditionally advance and wake for excessive CBs
rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
rcu/nocb: Reduce contention at no-CBs invocation-done time
rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
rcu/nocb: Round down for number of no-CBs grace-period kthreads
rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
...
|