If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem
to do POSIX ACL checks on any files not owned by the caller, and it does
this for every single pathname component that it looks up.
That obviously can be pretty expensive if the filesystem isn't careful
about it, especially with locking. That's doubly sad, since the common
case tends to be that there are no ACL's associated with the files in
question.
ext4 already caches the ACL data so that it doesn't have to look it up
over and over again, but it does so by taking the inode->i_lock spinlock
on every lookup. Which is a noticeable overhead even if it's a private
lock, especially on CPU's where the serialization is expensive (eg Intel
Netburst aka 'P4').
For the special case of not actually having any ACL's, all that locking is
unnecessary. Even if somebody else were to be changing the ACL's on
another CPU, we simply don't care - if we've seen a NULL ACL, we might as
well use it.
So just load the ACL speculatively without any locking, and if it was
NULL, just use it. If it's non-NULL (either because we had a cached
entry, or because the cache hasn't been filled in at all), it means that
we'll need to get the lock and re-load it properly.
(This commit was ported from a patch originally authored by Linus for
ext3.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a filesystem supports POSIX ACL's, the VFS layer expects the filesystem
to do POSIX ACL checks on any files not owned by the caller, and it does
this for every single pathname component that it looks up.
That obviously can be pretty expensive if the filesystem isn't careful
about it, especially with locking. That's doubly sad, since the common
case tends to be that there are no ACL's associated with the files in
question.
ext3 already caches the ACL data so that it doesn't have to look it up
over and over again, but it does so by taking the inode->i_lock spinlock
on every lookup. Which is a noticeable overhead even if it's a private
lock, especially on CPU's where the serialization is expensive (eg Intel
Netburst aka 'P4').
For the special case of not actually having any ACL's, all that locking is
unnecessary. Even if somebody else were to be changing the ACL's on
another CPU, we simply don't care - if we've seen a NULL ACL, we might as
well use it.
So just load the ACL speculatively without any locking, and if it was
NULL, just use it. If it's non-NULL (either because we had a cached
entry, or because the cache hasn't been filled in at all), it means that
we'll need to get the lock and re-load it properly.
This is noticeable even on Nehalem, which does locking quite well (much
better than P4). From lmbench:
Processor, Processes - times in microseconds - smaller is better
--------------------------------------------------------------------
Host OS Mhz null null open slct fork exec sh
call I/O stat clos TCP proc proc proc
--------- ------------- ---- ---- ---- ---- ---- ---- ---- ---- ----
- before:
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.45 2.18 69.1 273. 1141
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.95 1.48 2.28 69.9 253. 1140
nehalem.l Linux 2.6.30- 3193 0.04 0.10 0.95 1.42 2.19 68.6 284. 1141
- after:
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.44 2.12 68.3 282. 1094
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.20 67.0 308. 1123
nehalem.l Linux 2.6.30- 3193 0.04 0.09 0.92 1.39 2.36 67.4 293. 1148
where you can see what appears to be a roughly 3% improvement in stat
and open/close latencies from just the removal of the locking overhead.
Of course, this only matters for files you don't own (the owner never
needs to do the ACL checks), but that's the common case for libraries,
header files, and executables. As well as for the base components of any
absolute pathname, even if you are the owner of the final file.
[ At some point we probably want to move this ACL caching logic entirely
into the VFS layer (and only call down to the filesystem when
uncached), but in the meantime this improves ext3 a bit.
A similar fix to btrfs makes a much bigger difference (15x improvement
in lmbench) due to broken caching. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Authentication error abort codes should be translated to appropriate
Linux error codes, rather than all being translated to EREMOTEIO - which
indicates that the server had internal problems.
Additionally, a server shouldn't be marked unavailable and the next
server tried if an authentication error occurs. This will quickly make
all the servers unavailable to the client. Instead the error should be
returned straight to the user.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* akpm: (182 commits)
fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
fbdev: *bfin*: fix __dev{init,exit} markings
fbdev: *bfin*: drop unnecessary calls to memset
fbdev: bfin-t350mcqb-fb: drop unused local variables
fbdev: blackfin has __raw I/O accessors, so use them in fb.h
fbdev: s1d13xxxfb: add accelerated bitblt functions
tcx: use standard fields for framebuffer physical address and length
fbdev: add support for handoff from firmware to hw framebuffers
intelfb: fix a bug when changing video timing
fbdev: use framebuffer_release() for freeing fb_info structures
radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
s3c-fb: CPUFREQ frequency scaling support
s3c-fb: fix resource releasing on error during probing
carminefb: fix possible access beyond end of carmine_modedb[]
acornfb: remove fb_mmap function
mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
mb862xxfb: restrict compliation of platform driver to PPC
Samsung SoC Framebuffer driver: add Alpha Channel support
atmel-lcdc: fix pixclock upper bound detection
offb: use framebuffer_alloc() to allocate fb_info struct
...
Manually fix up conflicts due to kmemcheck in mm/slab.c
CONFIG_FILE_LOCKING should not depend on CONFIG_BLOCK.
This makes it possible to run complete systems out of a CONFIG_BLOCK=n
initramfs on current kernels again (this last worked on 2.6.27.*).
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
put_cpu_no_resched() is an optimization of put_cpu() which unfortunately
can cause high latencies.
The nfs iostats code uses put_cpu_no_resched() in a code sequence where a
reschedule request caused by an interrupt between the get_cpu() and the
put_cpu_no_resched() can delay the reschedule for at least HZ.
The other users of put_cpu_no_resched() optimize correctly in interrupt
code, but there is no real harm in using the put_cpu() function which is
an alias for preempt_enable(). The extra check of the preemmpt count is
not as critical as the potential source of missing a reschedule.
Debugged in the preempt-rt tree and verified in mainline.
Impact: remove a high latency source
[akpm@linux-foundation.org: build fix]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After introduction of keyed wakeups Davide Libenzi did on epoll, we are
able to avoid spurious wakeups in poll()/select() code too.
For example, typical use of poll()/select() is to wait for incoming
network frames on many sockets. But TX completion for UDP/TCP frames call
sock_wfree() which in turn schedules thread.
When scheduled, thread does a full scan of all polled fds and can sleep
again, because nothing is really available. If number of fds is large,
this cause significant load.
This patch makes select()/poll() aware of keyed wakeups and useless
wakeups are avoided. This reduces number of context switches by about 50%
on some setups, and work performed by sofirq handlers.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) I_FREEING tests should be coupled with I_CLEAR
The two I_FREEING tests are racy because clear_inode() can set i_state to
I_CLEAR between the clear of I_SYNC and the test of I_FREEING.
2) skip I_WILL_FREE inodes in generic_sync_sb_inodes() to avoid possible
races with generic_forget_inode()
generic_forget_inode() sets I_WILL_FREE call writeback on its own, so
generic_sync_sb_inodes() shall not try to step in and create possible races:
generic_forget_inode
inode->i_state |= I_WILL_FREE;
spin_unlock(&inode_lock);
generic_sync_sb_inodes()
spin_lock(&inode_lock);
__iget(inode);
__writeback_single_inode
// see non zero i_count
may WARN here ==> WARN_ON(inode->i_state & I_WILL_FREE);
spin_unlock(&inode_lock);
may call generic_forget_inode again ==> iput(inode);
The above race and warning didn't turn up because writeback_inodes() holds
the s_umount lock, so generic_forget_inode() finds MS_ACTIVE and returns
early. But we are not sure the UBIFS calls and future callers will
guarantee that. So skip I_WILL_FREE inodes for the sake of safety.
Cc: Eric Sandeen <sandeen@sandeen.net>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Masayoshi MIZUMA <m.mizuma@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove __invalidate_mapping_pages atomic variant now that its sole caller
can sleep (fixed in eccb95cee4 ("vfs: fix
lock inversion in drop_pagecache_sb()")).
This fixes softlockups that can occur while in the drop_caches path.
Signed-off-by: Mike Waychison <mikew@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The per-task oom_adj value is a characteristic of its mm more than the
task itself since it's not possible to oom kill any thread that shares the
mm. If a task were to be killed while attached to an mm that could not be
freed because another thread were set to OOM_DISABLE, it would have
needlessly been terminated since there is no potential for future memory
freeing.
This patch moves oomkilladj (now more appropriately named oom_adj) from
struct task_struct to struct mm_struct. This requires task_lock() on a
task to check its oom_adj value to protect against exec, but it's already
necessary to take the lock when dereferencing the mm to find the total VM
size for the badness heuristic.
This fixes a livelock if the oom killer chooses a task and another thread
sharing the same memory has an oom_adj value of OOM_DISABLE. This occurs
because oom_kill_task() repeatedly returns 1 and refuses to kill the
chosen task while select_bad_process() will repeatedly choose the same
task during the next retry.
Taking task_lock() in select_bad_process() to check for OOM_DISABLE and in
oom_kill_task() to check for threads sharing the same memory will be
removed in the next patch in this series where it will no longer be
necessary.
Writing to /proc/pid/oom_adj for a kthread will now return -EINVAL since
these threads are immune from oom killing already. They simply report an
oom_adj value of OOM_DISABLE.
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Export all page flags faithfully in /proc/kpageflags.
11. KPF_MMAP (pseudo flag) memory mapped page
12. KPF_ANON (pseudo flag) memory mapped page (anonymous)
13. KPF_SWAPCACHE page is in swap cache
14. KPF_SWAPBACKED page is swap/RAM backed
15. KPF_COMPOUND_HEAD (*)
16. KPF_COMPOUND_TAIL (*)
17. KPF_HUGE hugeTLB pages
18. KPF_UNEVICTABLE page is in the unevictable LRU list
19. KPF_HWPOISON(TBD) hardware detected corruption
20. KPF_NOPAGE (pseudo flag) no page frame at the address
32-39. more obscure flags for kernel developers
(*) For compound pages, exporting _both_ head/tail info enables
users to tell where a compound page starts/ends, and its order.
The accompanying page-types tool will handle the details like decoupling
overloaded flags and hiding obscure flags to normal users.
Thanks to KOSAKI and Andi for their valuable recommendations!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure the client requested maximum requests are between 1 and
NFSD_MAX_SLOTS_PER_SESSION
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
send_sigio_to_task() reads fown->signum several times, we can race with
F_SETSIG which changes ->signum lockless. In theory, this can fool
security checks or we can call group_send_sig_info() with the wrong
->si_signo which does not match "int sig".
Change the code to cache ->signum.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shift current_cred() from __f_setown() to f_modown(). This reduces
the number of arguments and saves 48 bytes from fs/fcntl.o.
[ Note: this doesn't clear euid/uid when pid is set to NULL. But if
f_owner.pid == NULL we never use f_owner.uid/euid. Otherwise we'd
have a bug anyway: we must not send signals if pid was reset to NULL. ]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits)
debugfs: use specified mode to possibly mark files read/write only
debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
xen: remove driver_data direct access of struct device from more drivers
usb: gadget: at91_udc: remove driver_data direct access of struct device
uml: remove driver_data direct access of struct device
block/ps3: remove driver_data direct access of struct device
s390: remove driver_data direct access of struct device
parport: remove driver_data direct access of struct device
parisc: remove driver_data direct access of struct device
of_serial: remove driver_data direct access of struct device
mips: remove driver_data direct access of struct device
ipmi: remove driver_data direct access of struct device
infiniband: ehca: remove driver_data direct access of struct device
ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device
hvcs: remove driver_data direct access of struct device
xen block: remove driver_data direct access of struct device
thermal: remove driver_data direct access of struct device
scsi: remove driver_data direct access of struct device
pcmcia: remove driver_data direct access of struct device
PCIE: remove driver_data direct access of struct device
...
Manually fix up trivial conflicts due to different direct driver_data
direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/net: Use wait_event() in o2net_send_message_vec()
ocfs2: Adjust rightmost path in ocfs2_add_branch.
ocfs2: fdatasync should skip unimportant metadata writeout
ocfs2: Remove redundant gotos in ocfs2_mount_volume()
ocfs2: Add statistics for the checksum and ecc operations.
ocfs2 patch to track delayed orphan scan timer statistics
ocfs2: timer to queue scan of all orphan slots
ocfs2: Correct ordering of ip_alloc_sem and localloc locks for directories
ocfs2: Fix possible deadlock in quota recovery
ocfs2: Fix possible deadlock with quotas in ocfs2_setattr()
ocfs2: Fix lock inversion in ocfs2_local_read_info()
ocfs2: Fix possible deadlock in ocfs2_global_read_dquot()
ocfs2: update comments in masklog.h
ocfs2: Don't printk the error when listing too many xattrs.
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove some includings of blktrace_api.h
mg_disk: seperate mg_disk.h again
block: Introduce helper to reset queue limits to default values
cfq: remove extraneous '\n' in blktrace output
ubifs: register backing_dev_info
btrfs: properly register fs backing device
block: don't overwrite bdi->state after bdi_init() has been run
cfq: cleanup for last_end_request in cfq_data
Commit fec1878fe9 caused a regression in
which contiguous blocks being allocated to the end of an extent were
getting a new extent created. This typically results in files entirely
made up of 1-block extents even though the blocks are contiguous on
disk.
Apparently grub doesn't handle a jfs file being fragmented into too many
extents, since it refuses to boot a kernel from jfs that was created by
the 2.6.30 kernel.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reported-by: Alex <alevkovich@tut.by>
the change is valid for both the forechannel and the backchannel (currently dummy)
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
btrfs assigns this bdi to all inodes on that file system, so make
sure it's registered. This isn't really important now, but will be
when we put dirty inodes there. Even now, we miss the stats when the
bdi isn't visible.
Also fixes failure to check bdi_init() return value, and bad inherit of
->capabilities flags from the default bdi.
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch (as1239) updates the kernel's treatment of Unicode. The
character-set conversion routines are well behind the current state of
the Unicode specification: They don't recognize the existence of code
points beyond plane 0 or of surrogate pairs in the UTF-16 encoding.
The old wchar_t 16-bit type is retained because it's still used in
lots of places. This shouldn't cause any new problems; if a
conversion now results in an invalid 16-bit code then before it must
have yielded an undefined code.
Difficult-to-read names like "utf_mbstowcs" are replaced with more
transparent names like "utf8s_to_utf16s" and the ordering of the
parameters is rationalized (buffer lengths come immediate after the
pointers they refer to, and the inputs precede the outputs).
Fortunately the low-level conversion routines are used in only a few
places; the interfaces to the higher-level uni2char and char2uni
methods have been left unchanged.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
utf8_wcstombs forgot to include one-byte UTF-8 characters when
calculating the output buffer size, i.e., theoretically, it was possible
to overflow the output buffer with an input string that contains enough
ASCII characters.
In practice, this was no problem because the only user so far (VFAT)
always uses a big enough output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When utf8_wcstombs encounters a character that cannot be encoded, we
must not decrease the remaining output buffer size because nothing has
been written to the output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In many SoC implementations there are hardware registers can be read or
write only. This extends the debugfs to enforce the file permissions for
these types of registers by providing a set of fops which are read or
write only. This assumes that the kernel developer knows more about the
hardware than the user (even root users) -- which is normally true.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix an error in debugfs_create_blob's docbook description
It cannot actually be used to write a binary blob.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
debugfs: dont stop on first failed recursive delete
While running a while loop of removing a module that removes a debugfs
directory with debugfs_remove_recursive, and at the same time doing a
while loop of cat of a file in that directory, I would hit a point where
somehow the cat of the file caused the remove to fail.
The result is that other files did not get removed when the module
was removed. I simple read of one of those file can oops the kernel
because the operations to the file no longer exist (removed by module).
The funny thing is that the file being cat'ed was removed. It was
the siblings that were not. I see in the code to debugfs_remove_recursive
there's a test that checks if the child fails to bail out of the loop
to prevent an infinite loop.
What this patch does is to still try any siblings in that directory.
If all the siblings fail, or there are no more siblings, then we exit
the loop.
This fixes the above symptom, but...
This is no full proof. It makes the debugfs_remove_recursive a bit more
robust, but it does not explain why the one file failed. There may
be some kind of delay deletion that makes the debugfs think it did
not succeed. So this patch is more of a fix for the symptom but not
the disease.
This patch still makes the debugfs_remove_recursive more robust and
until I can find out why the bug exists, this patch will keep
the kernel from oopsing in most cases. Even after the cause is found
I think this change can stand on its own and should be kept.
[ Impact: prevent kernel oops on module unload and reading debugfs files ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is the possiblity of a memory leak if a page is allocated and if
sysfs_getlink() fails in the sysfs_follow_link.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kill off obscure macro 'PROC' of NFSv2&3 in order to make the code more clear.
Among other things, this makes it simpler to grep for callers of these
functions--something which has frequently caused confusion among nfs
developers.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to check host_err >= 0 every time here when we could
check host_err < 0 once, following the usual kernel style.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a relatively self-contained piece of code that handles a special
case--move it to its own function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Updating last_ino and last_dev probably isn't useful in the !use_wgather
case.
Also remove some pointless ifdef'd-out code.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv3 and above can use unstable writes whenever they are sending more
than one write, rather than relying on the flaky write gathering
heuristics. More often than not, write gathering is currently getting it
wrong when the NFSv3 clients are sending a single write with FILE_SYNC
for efficiency reasons.
This patch turns off write gathering for NFSv3/v4, and ensures that
it only applies to the one case that can actually benefit: namely NFSv2.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
commit_fs_roots skips updating root items for fs trees that aren't modified.
This is unsafe now that relocation code modifies root item's last_snapshot
field without modifying corresponding fs tree.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Replace wait_event_interruptible() with wait_event() in o2net_send_message_vec().
This is because this function is called by the dlm that expects signals to be
blocked.
Fixes oss bugzilla#1126
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1126
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_add_branch, we use the rightmost rec of the leaf extent block
to generate the e_cpos for the newly added branch. In the most case, it
is OK but if the parent extent block's rightmost rec covers more clusters
than the leaf does, it will cause kernel panic if we insert some clusters
in it. The message is something like:
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: bug expression:
le16_to_cpu(el->l_next_free_rec) >= le16_to_cpu(el->l_count)
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: inode 66053, depth 0, count 28,
next free 28, rec.cpos 270, rec.clusters 1, insert.cpos 275, insert.clusters 1
[<fa7ad565>] ? ocfs2_do_insert_extent+0xb58/0xda0 [ocfs2]
[<fa7b08f2>] ? ocfs2_insert_extent+0x5bd/0x6ba [ocfs2]
[<fa7b1b8b>] ? ocfs2_add_clusters_in_btree+0x37f/0x564 [ocfs2]
...
The panic can be easily reproduced by the following small test case
(with bs=512, cs=4K, and I remove all the error handling so that it looks
clear enough for reading).
int main(int argc, char **argv)
{
int fd, i;
char buf[5] = "test";
fd = open(argv[1], O_RDWR|O_CREAT);
for (i = 0; i < 30; i++) {
lseek(fd, 40960 * i, SEEK_SET);
write(fd, buf, 5);
}
ftruncate(fd, 1146880);
lseek(fd, 1126400, SEEK_SET);
write(fd, buf, 5);
close(fd);
return 0;
}
The reason of the panic is that:
the 30 writes and the ftruncate makes the file's extent list looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 280 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
Now another write at 1126400(275 cluster) whiich will write at the gap
between 271 and 280 will trigger ocfs2_add_branch, but the result after
the function looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 280 86183
1 271 0 143592
So the extent record is intersected and make the following operation bug out.
This patch just try to remove the gap before we add the new branch, so that
the root(branch) rightmost rec will cover the same right position. So in the
above case, before adding branch the tree will be changed to
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 271 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
And after branch add, the tree looks like
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 271 86183
1 271 0 143592
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
The members from 'status' in struct sg_io_hdr to the last are used to
transfer information from kernel to user space. The values that user
space sets are just ignored.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
In case of an error returned by file_dirty() 's' is not freed as the cleanup
path is skipped.
Reported by Coverity.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The VFS handles updating ctime, so we don't need to update the inode's
ctime in ext4_splace_branch() to update the direct or indirect blocks.
This was harmless when we did this in ext3, but in ext4, thanks to
delayed allocation, updating the ctime in ext4_splice_branch() can
cause the ctime to mysteriously jump when the blocks are finally
allocated.
Thanks to Björn Steinbrink for pointing out this problem on the git
mailing list.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On systems where CONFIG_SHMEM is disabled, mounting tmpfs filesystems can
fail when tmpfs options are used. This is because tmpfs creates a small
wrapper around ramfs which rejects unknown options, and ramfs itself only
supports a tiny subset of what tmpfs supports. This makes it pretty hard
to use the same userspace systems across different configuration systems.
As such, ramfs should ignore the tmpfs options when tmpfs is merely a
wrapper around ramfs.
This used to work before commit c3b1b1cbf0 as previously, ramfs would
ignore all options. But now, we get:
ramfs: bad mount option: size=10M
mount: mounting mdev on /dev failed: Invalid argument
Another option might be to restore the previous behavior, where ramfs
simply ignored all unknown mount options ... which is what Hugh prefers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function ext4_mb_free_blocks() was using an "unsigned long" to
pass a block number; this will cause 64-bit block numbers to get
truncated on x86 and other 32-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're running out of space in the mount options word, and
EXT4_MOUNT_ABORT isn't really a mount option, but a run-time flag. So
move it to become EXT4_MF_FS_ABORTED in s_mount_flags.
Also remove bogus ext2_fs.h / ext4.h simultaneous #include protection,
which can never happen.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This field can be very helpful when a system administrator is trying
to sort through large numbers of block devices or filesystem images.
What is stored in this field can be ambiguous if multiple filesystem
namespaces are in play; what we store in practice is the mountpoint
interpreted by the process's namespace which first opens a file in the
filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can only fit 32 options in s_mount_opt because an unsigned long is
32-bits on a x86 machine. So use an unsigned int to save space on
64-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd,
and then write the file data of orig_fd to donor_fd.
ext4_mext_move_extent() is the main fucntion of ext4 online defrag,
and this patch includes all functions related to ext4 online defrag.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Identation got messed up when merging the current_umask changes with
the generic ACL support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix warnings about unitialized dquot variables by making sure
xfs_qm_vop_dqalloc touches it even when quotas are disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
configfs: Rework configfs_depend_item() locking and make lockdep happy
configfs: Silence lockdep on mkdir() and rmdir()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: use more NOFS allocation
dlm: connect to nodes earlier
dlm: fix use count with multiple joins
dlm: Make name input parameter of {,dlm_}new_lockspace() const
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (154 commits)
[SCSI] osd: Remove out-of-tree left overs
[SCSI] libosd: Use REQ_QUIET requests.
[SCSI] osduld: use filp_open() when looking up an osd-device
[SCSI] libosd: Define an osd_dev wrapper to retrieve the request_queue
[SCSI] libosd: osd_req_{read,write} takes a length parameter
[SCSI] libosd: Let _osd_req_finalize_data_integrity receive number of out_bytes
[SCSI] libosd: osd_req_{read,write}_kern new API
[SCSI] libosd: Better printout of OSD target system information
[SCSI] libosd: OSD2r05: Attribute definitions
[SCSI] libosd: OSD2r05: Additional command enums
[SCSI] mpt fusion: fix up doc book comments
[SCSI] mpt fusion: Added support for Broadcast primitives Event handling
[SCSI] mpt fusion: Queue full event handling
[SCSI] mpt fusion: RAID device handling and Dual port Raid support is added
[SCSI] mpt fusion: Put IOC into ready state if it not already in ready state
[SCSI] mpt fusion: Code Cleanup patch
[SCSI] mpt fusion: Rescan SAS topology added
[SCSI] mpt fusion: SAS topology scan changes, expander events
[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue
[SCSI] mpt fusion: rewrite of ioctl_cmds internal generated function
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: (31 commits)
lguest: add support for indirect ring entries
lguest: suppress notifications in example Launcher
lguest: try to batch interrupts on network receive
lguest: avoid sending interrupts to Guest when no activity occurs.
lguest: implement deferred interrupts in example Launcher
lguest: remove obsolete LHREQ_BREAK call
lguest: have example Launcher service all devices in separate threads
lguest: use eventfds for device notification
eventfd: export eventfd_signal and eventfd_fget for lguest
lguest: allow any process to send interrupts
lguest: PAE fixes
lguest: PAE support
lguest: Add support for kvm_hypercall4()
lguest: replace hypercall name LHCALL_SET_PMD with LHCALL_SET_PGD
lguest: use native_set_* macros, which properly handle 64-bit entries when PAE is activated
lguest: map switcher with executable page table entries
lguest: fix writev returning short on console output
lguest: clean up length-used value in example launcher
lguest: Segment selectors are 16-bit long. Fix lg_cpu.ss1 definition.
lguest: beyond ARRAY_SIZE of cpu->arch.gdt
...
* 'cuse' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
CUSE: implement CUSE - Character device in Userspace
fuse: export symbols to be used by CUSE
fuse: update fuse_conn_init() and separate out fuse_conn_kill()
fuse: don't use inode in fuse_file_poll
fuse: don't use inode in fuse_do_ioctl() helper
fuse: don't use inode in fuse_sync_release()
fuse: create fuse_do_open() helper for CUSE
fuse: clean up args in fuse_finish_open() and fuse_release_fill()
fuse: don't use inode in helpers called by fuse_direct_io()
fuse: add members to struct fuse_file
fuse: prepare fuse_direct_io() for CUSE
fuse: clean up fuse_write_fill()
fuse: use struct path in release structure
fuse: misc cleanups
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits)
ide: re-implement ide_pci_init_one() on top of ide_pci_init_two()
ide: unexport ide_find_dma_mode()
ide: fix PowerMac bootup oops
ide: skip probe if there are no devices on the port (v2)
sl82c105: add printk() logging facility
ide-tape: fix proc warning
ide: add IDE_DFLAG_NIEN_QUIRK device flag
ide: respect quirk_drives[] list on all controllers
hpt366: enable all quirks for devices on quirk_drives[] list
hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c
ide: remove superfluous SELECT_MASK() call from do_rw_taskfile()
ide: remove superfluous SELECT_MASK() call from ide_driveid_update()
icside: remove superfluous ->maskproc method
ide-tape: fix IDE_AFLAG_* atomic accesses
ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically
pdc202xx_old: kill resetproc() method
pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout
pdc202xx_old: use ide_dma_test_irq()
ide: preserve Host Protected Area by default (v2)
ide-gd: implement block device ->set_capacity method (v2)
...
The advertised flag for not updating the time was wrong.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Regression from commit 28e211700a.
Need to free temporary buffer allocated in xfs_getbmap().
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Conflicts:
drivers/message/fusion/mptsas.c
fixed up conflict between req->data_len accessors and mptsas driver updates.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
lguest wants to attach eventfds to guest notifications, and lguest is
usually a module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To: Davide Libenzi <davidel@xmailserver.org>
This patch adds the ability to trace various aspects of the GFS2
filesystem. The trace points are divided into three groups,
glocks, logging and bmap. These points have been chosen because
they allow inspection of the major internal functions of GFS2
and they are also generic enough that they are unlikely to need
any major changes as the filesystem evolves.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This will remove every bd_mount_sem use in nilfs.
The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nilfs_remount() changes mount state of a superblock instance. Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().
Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:
1. bdev->bd_mount_sem
2. sb->s_umount (sget acquires)
and nilfs_remount() holds:
1. sb->s_umount (locked by the caller in vfs)
2. bdev->bd_mount_sem
To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().
With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved. And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This simplifies the test function passed on the remaining sget()
callsite in nilfs.
Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device. This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will change the way to obtain nilfs object in nilfs_get_sb()
function.
Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.
This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The following EBUSY case in nilfs_get_sb() is meaningless. Indeed,
this error code is never returned to the caller.
if (!s->s_root) {
...
} else if (!(s->s_flags & MS_RDONLY)) {
err = -EBUSY;
}
This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.
This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a ->sync_fs method for data integrity syncs. Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership. So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kill ext2_sync_file() (along with ext2/fsync.c), get rid of
ext2_update_inode() - it's an alias of ext2_write_inode().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mark directory data blocks as assoc. metadata
* add new inode to deal with FAT, mark FAT blocks as assoc. metadata of that
* now ->fsync() is trivial both for files and directories
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs-internal parts of qnx4_fs.h taken to fs/qnx4/qnx4.h, includes adjusted,
qnx4_fs.h doesn't need unifdef anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* have directory operations use mark_buffer_dirty_inode(),
so that sync_mapping_buffers() would get those.
* make qnx4_write_inode() honour its last argument.
* get rid of insane copies of very ancient "walk the indirect blocks"
in qnx4/fsync - they never matched the actual fs layout and, fortunately,
never'd been called. Again, all this junk is not needed; ->fsync()
should just do sync_mapping_buffers + sync_inode (and if we implement
block allocation for qnx4, we'll need to use mark_buffer_dirty_inode()
for extent blocks)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
writes associated buffers, then does sync_inode() to write
the inode itself (and to make it clean). Depends on
->write_inode() honouring the second argument.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I think the block_dump output in __mark_inode_dirty is missing dentry locking.
Surely the i_dentry list can change any time, so we may not even *get* a
dentry there. If we do get one by chance, then it would appear to be able to
go away or get renamed at any time...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Some filesystems can call in to sync an inode that is still in the
I_NEW state (eg. ext family, when mounted with -osync). This is OK
because the filesystem has sole access to the new inode, so it can
modify i_state without races (because no other thread should be
modifying it, by definition of I_NEW). Ie. a false positive, so
remove the warnings.
The races are described here 7ef0d7377c,
which is also where the warnings were introduced.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
the write_super method is used for
(1) writing back the superblock periodically from pdflush
(2) called just before ->sync_fs for data integerity syncs
We don't need (1) because we have our own peridoc writeout through xfssyncd,
and we don't need (2) because xfs_fs_sync_fs performs a proper synchronous
superblock writeout after all other data and metadata has been written out.
Also remove ->s_dirt tracking as it's only used to decide when too call
->write_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This should not trigger anymore, so kill it.
Acked-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only user of the i_cindex element in the inode structure is used
is by the firewire drivers. As part of an attempt to slim down the
inode structure to save memory --- since a typical Linux system will
have hundreds of thousands if not millions of inodes cached, a
reduction in the size inode has high leverage.
The firewire driver does not need i_cindex in any fast path, so it's
simple enough to calculate when it is needed, instead of wasting space
in the inode structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: krh@redhat.com
Cc: stefanr@s5r6.in-berlin.de
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Push down lock_super into ->write_super instances and remove it from the
caller.
Following filesystem don't need ->s_lock in ->write_super and are skipped:
* bfs, nilfs2 - no other uses of s_lock and have internal locks in
->write_super
* ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
* reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
->write_super
* xfs - no other uses of s_lock and uses internal lock (buffer lock on
superblock buffer) to serialize ->write_super. Also xfs_fs_write_super
is superflous and will go away in the next merge window
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
jffs2_write_super is only called from super.c and doesn't use any
functionality from fs.c. So move it over to super.c and make it
static there.
[should go in through the vfs tree as it is a requirement for the
next patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own. Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").
[folded a build fix from hch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't run into contention on it. All other callers of lock_super()
either hold s_umount (and we have it exclusive) or hold an active
reference to superblock in question, which prevents the call of
generic_shutdown_super() while the reference is held. So we can
replace lock_super(s) with get_fs_excl() in generic_shutdown_super()
(and corresponding change for unlock_super(), of course).
Since ext4 expects s_lock held for its put_super, take lock_super()
into it. The rest of filesystems do not care at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure a superblock really is writeable by checking MS_RDONLY
under s_umount. sync_filesystems needed some re-arragement for
that, but all but one sync_filesystem caller had the correct locking
already so that we could add that check there. cachefiles grew
s_umount locking.
I've also added a WARN_ON to sync_filesystem to assert this for
future callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge the write_super helper into sync_super and move the check for
->write_super earlier so that we can avoid grabbing a reference to
a superblock that doesn't have it.
While we're at it also add a little comment documenting sync_supers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
d_unlinked() will be used in middle-term to ban checkpointing when opened
but unlinked file is detected, and in long term, to detect such situation
and special case on it.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.
Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.
Exceptions:
- affs already has identical copy & pasted code at the beginning of
affs_put_super so no need to do it twice.
- xfs does the right thing without it and I have changes pending for
the xfs tree touching this are so I don't really need conflicts
here..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Introduce this function which just writes all the quota structures but
avoids all the syncing and cache pruning work to expose quota structures
to userspace. Use this function from __sync_filesystem when wait == 0.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the VFS calls vfs_dq_sync to sync out disk quotas for a given
superblock. This is a small wrapper around sync_dquots which for the
case of a non-NULL superblock is a small wrapper around quota_sync_sb.
Just make quota_sync_sb global (rename it to sync_quota_sb) and call it
directly. Also call it directly for those cases in quota.c that have a
superblock and leave sync_dquots purely an iterator over sync_quota_sb and
remove it's superblock argument.
To make this nicer move the check for the lack of a quota_sync method
from the callers into sync_quota_sb.
[folded build fix from Alexander Beregalov <a.beregalov@gmail.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the function so that it better describe what it really does. Also
remove the unnecessary include of buffer_head.h.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move sync_filesystems(), __fsync_super(), fsync_super() from
super.c to sync.c where it fits better.
[build fixes folded]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is unnecessarily fragile to have two places (fsync_super() and do_sync())
doing data integrity sync of the filesystem. Alter __fsync_super() to
accommodate needs of both callers and use it. So after this patch
__fsync_super() is the only place where we gather all the calls needed to
properly send all data on a filesystem to disk.
Nice bonus is that we get a complete livelock avoidance and write_supers()
is now only used for periodic writeback of superblocks.
sync_blockdevs() introduced a couple of patches ago is gone now.
[build fixes folded]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__fsync_super() does the same thing as fsync_super(). So change the only
caller to use fsync_super() and make __fsync_super() static. This removes
unnecessarily duplicated call to sync_blockdev() and prepares ground
for the changes to __fsync_super() in the following patches.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sync_filesystems() has a condition that if wait == 0 and s_dirt == 0, then
->sync_fs() isn't called. This does not really make much sence since s_dirt is
generally used by a filesystem to mean that ->write_super() needs to be called.
But ->sync_fs() does different things. I even suspect that some filesystems
(btrfs?) sets s_dirt just to fool this logic.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So far, do_sync() called:
sync_inodes(0);
sync_supers();
sync_filesystems(0);
sync_filesystems(1);
sync_inodes(1);
This ordering makes it kind of hard for filesystems as sync_inodes(0) need not
submit all the IO (for example it skips inodes with I_SYNC set) so e.g. forcing
transaction to disk in ->sync_fs() is not really enough. Therefore sys_sync has
not been completely reliable on some filesystems (ext3, ext4, reiserfs, ocfs2
and others are hit by this) when racing e.g. with background writeback. A
similar problem hits also other filesystems (e.g. ext2) because of
write_supers() being called before the sync_inodes(1).
Change the ordering of calls in do_sync() - this requires a new function
sync_blockdevs() to preserve the property that block devices are always synced
after write_super() / sync_fs() call.
The same issue is fixed in __fsync_super() function used on umount /
remount read-only.
[AV: build fixes]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the unused s_async_list in the superblock, a leftover of the
broken async inode deletion code that leaked into mainline. Having this
in the middle of the sync/unmount path is not helpful for the following
cleanups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This function walks the s_files lock, and operates primarily on the
files in a superblock, so it better belongs here (eg. see also
fs_may_remount_ro).
[AV: ... and it shouldn't be static after that move]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch speeds up lmbench lat_mmap test by about another 2% after the
first patch.
Before:
avg = 462.286
std = 5.46106
After:
avg = 453.12
std = 9.58257
(50 runs of each, stddev gives a reasonable confidence)
It does this by introducing mnt_clone_write, which avoids some heavyweight
operations of mnt_want_write if called on a vfsmount which we know already
has a write count; and mnt_want_write_file, which can call mnt_clone_write
if the file is open for write.
After these two patches, mnt_want_write and mnt_drop_write go from 7% on
the profile down to 1.3% (including mnt_clone_write).
[AV: mnt_want_write_file() should take file alone and derive mnt from it;
not only all callers have that form, but that's the only mnt about which
we know that it's already held for write if file is opened for write]
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch speeds up lmbench lat_mmap test by about 8%. lat_mmap is set up
basically to mmap a 64MB file on tmpfs, fault in its pages, then unmap it.
A microbenchmark yes, but it exercises some important paths in the mm.
Before:
avg = 501.9
std = 14.7773
After:
avg = 462.286
std = 5.46106
(50 runs of each, stddev gives a reasonable confidence, but there is quite
a bit of variation there still)
It does this by removing the complex per-cpu locking and counter-cache and
replaces it with a percpu counter in struct vfsmount. This makes the code
much simpler, and avoids spinlocks (although the msync is still pretty
costly, unfortunately). It results in about 900 bytes smaller code too. It
does increase the size of a vfsmount, however.
It should also give a speedup on large systems if CPUs are frequently operating
on different mounts (because the existing scheme has to operate on an atomic in
the struct vfsmount when switching between mounts). But I'm most interested in
the single threaded path performance for the moment.
[AV: minor cleanup]
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These guys are what we add as submounts; checks for "is that attached in
our namespace" are simply irrelevant for those and counterproductive for
use of private vfsmount trees a-la what NFS folks want.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
New field: nd->root. When pathname resolution wants to know the root,
check if nd->root.mnt is non-NULL; use nd->root if it is, otherwise
copy current->fs->root there. After path_walk() is finished, we check
if we'd got a cached value in nd->root and drop it. Before calling
path_walk() we should either set nd->root.mnt to NULL *or* copy (and
pin down) some path to nd->root. In the latter case we won't be
looking at current->fs->root at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split do_path_lookup(), opencode the call from do_filp_open()
do_filp_open() is the only caller of do_path_lookup() that
cares about root afterwards (it keeps resolving symlinks on
O_CREAT path after it'd done LOOKUP_PARENT walk). So when
we start caching fs->root in path_walk(), it'll need a different
treatment.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds an -oexpose_privroot option to allow access to the privroot.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (23 commits)
Btrfs: fix extent_buffer leak during tree log replay
Btrfs: fix oops when btrfs_inherit_iflags called with a NULL dir
Btrfs: fix -o nodatasum printk spelling
Btrfs: check duplicate backrefs for both data and metadata
Btrfs: init worker struct fields before kthread-run
Btrfs: pin buffers during write_dev_supers
Btrfs: avoid races between super writeout and device list updates
Fix btrfs when ACLs are configured out
Btrfs: fdatasync should skip metadata writeout
Btrfs: remove crc32c.h and use libcrc32c directly.
Btrfs: implement FS_IOC_GETFLAGS/SETFLAGS/GETVERSION
Btrfs: autodetect SSD devices
Btrfs: add mount -o ssd_spread to spread allocations out
Btrfs: avoid allocation clusters that are too spread out
Btrfs: Add mount -o nossd
Btrfs: avoid IO stalls behind congested devices in a multi-device FS
Btrfs: don't allow WRITE_SYNC bios to starve out regular writes
Btrfs: fix metadata dirty throttling limits
Btrfs: reduce mount -o ssd CPU usage
Btrfs: balance btree more often
...
* 'for-linus' of git://git.infradead.org/users/eparis/notify:
fsnotify: allow groups to set freeing_mark to null
inotify/dnotify: should_send_event shouldn't match on FS_EVENT_ON_CHILD
dnotify: do not bother to lock entry->lock when reading mask
dnotify: do not use ?true:false when assigning to a bool
fsnotify: move events should indicate the event was on a child
inotify: reimplement inotify using fsnotify
fsnotify: handle filesystem unmounts with fsnotify marks
fsnotify: fsnotify marks on inodes pin them in core
fsnotify: allow groups to add private data to events
fsnotify: add correlations between events
fsnotify: include pathnames with entries when possible
fsnotify: generic notification queue and waitq
dnotify: reimplement dnotify using fsnotify
fsnotify: parent event notification
fsnotify: add marks to inodes so groups can interpret how to handle those inodes
fsnotify: unified filesystem notification backend
* 'for-linus' of git://linux-arm.org/linux-2.6:
kmemleak: Add the corresponding MAINTAINERS entry
kmemleak: Simple testing module for kmemleak
kmemleak: Enable the building of the memory leak detector
kmemleak: Remove some of the kmemleak false positives
kmemleak: Add modules support
kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
kmemleak: Add the vmalloc memory allocation/freeing hooks
kmemleak: Add the slub memory allocation/freeing hooks
kmemleak: Add the slob memory allocation/freeing hooks
kmemleak: Add the slab memory allocation/freeing hooks
kmemleak: Add documentation on the memory leak detector
kmemleak: Add the base support
Manual conflict resolution (with the slab/earlyboot changes) in:
drivers/char/vt.c
init/main.c
mm/slab.c
* 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits)
perf_counter: Turn off by default
perf_counter: Add counter->id to the throttle event
perf_counter: Better align code
perf_counter: Rename L2 to LL cache
perf_counter: Standardize event names
perf_counter: Rename enums
perf_counter tools: Clean up u64 usage
perf_counter: Rename perf_counter_limit sysctl
perf_counter: More paranoia settings
perf_counter: powerpc: Implement generalized cache events for POWER processors
perf_counters: powerpc: Add support for POWER7 processors
perf_counter: Accurate period data
perf_counter: Introduce struct for sample data
perf_counter tools: Normalize data using per sample period data
perf_counter: Annotate exit ctx recursion
perf_counter tools: Propagate signals properly
perf_counter tools: Small frequency related fixes
perf_counter: More aggressive frequency adjustment
perf_counter/x86: Fix the model number of Intel Core2 processors
perf_counter, x86: Correct some event and umask values for Intel processors
...
Most fsnotify listeners (all but inotify) do not care about marks being
freed. Allow groups to set freeing_mark to null and do not call any
function if it is set that way.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify and dnotify will both indicate that they want any event which came
from a child inode. The fix is to mask off FS_EVENT_ON_CHILD when deciding
if inotify or dnotify is interested in a given event.
Signed-off-by: Eric Paris <eparis@redhat.com>
entry->lock is needed to make sure entry->mask does not change while
manipulating it. In dnotify_should_send_event() we don't care if we get an
old or a new mask value out of this entry so there is no point it taking
the lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
dnotify_should send event assigned a bool using ?true:false when computing
a bit operation. This is poitless and the bool type does this for us.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reimplement inotify_user using fsnotify. This should be feature for feature
exactly the same as the original inotify_user. This does not make any changes
to the in kernel inotify feature used by audit. Those patches (and the eventual
removal of in kernel inotify) will come after the new inotify_user proves to be
working correctly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When an fs is unmounted with an fsnotify mark entry attached to one of its
inodes we need to destroy that mark entry and we also (like inotify) send
an unmount event.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch pins any inodes with an fsnotify mark in core. The idea is that
as soon as the mark is removed from the inode->fsnotify_mark_entries list
the inode will be iput. In reality is doesn't quite work exactly this way.
The igrab will happen when the mark is added to an inode, but the iput will
happen when the inode pointer is NULL'd inside the mark.
It's possible that 2 racing things will try to remove the mark from
different directions. One may try to remove the mark because of an
explicit request and one might try to remove it because the inode was
deleted. It's possible that the removal because of inode deletion will
remove the mark from the inode's list, but the removal by explicit request
will actually set entry->inode == NULL; and call the iput. This is safe.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs per group information attached to events. This patch allows
groups to attach private information and implements a callback so that
information can be freed when an event is being destroyed.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
As part of the standard inotify events it includes a correlation cookie
between two dentry move operations. This patch includes the same behaviour
in fsnotify events. It is needed so that inotify userspace can be
implemented on top of fsnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When inotify wants to send events to a directory about a child it includes
the name of the original file. This patch collects that filename and makes
it available for notification.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs to do asyc notification in which event information is stored
on a queue until the listener is ready to receive it. This patch
implements a generic notification queue for inotify (and later fanotify) to
store events to be sent at a later time.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Reimplement dnotify using fsnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify and dnotify both use a similar parent notification mechanism. We
add a generic parent notification mechanism to fsnotify for both of these
to use. This new machanism also adds the dentry flag optimization which
exists for inotify to dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch creates a way for fsnotify groups to attach marks to inodes.
These marks have little meaning to the generic fsnotify infrastructure
and thus their meaning should be interpreted by the group that attached
them to the inode's list.
dnotify and inotify will make use of these markings to indicate which
inodes are of interest to their respective groups. But this implementation
has the useful property that in the future other listeners could actually
use the marks for the exact opposite reason, aka to indicate which inodes
it had NO interest in.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
fsnotify is a backend for filesystem notification. fsnotify does
not provide any userspace interface but does provide the basis
needed for other notification schemes such as dnotify. fsnotify
can be extended to be the backend for inotify or the upcoming
fanotify. fsnotify provides a mechanism for "groups" to register for
some set of filesystem events and to then deliver those events to
those groups for processing.
fsnotify has a number of benefits, the first being actually shrinking the size
of an inode. Before fsnotify to support both dnotify and inotify an inode had
unsigned long i_dnotify_mask; /* Directory notify events */
struct dnotify_struct *i_dnotify; /* for directory notifications */
struct list_head inotify_watches; /* watches on this inode */
struct mutex inotify_mutex; /* protects the watches list
But with fsnotify this same functionallity (and more) is done with just
__u32 i_fsnotify_mask; /* all events for this inode */
struct hlist_head i_fsnotify_mark_entries; /* marks on this inode */
That's right, inotify, dnotify, and fanotify all in 64 bits. We used that
much space just in inotify_watches alone, before this patch set.
fsnotify object lifetime and locking is MUCH better than what we have today.
inotify locking is incredibly complex. See 8f7b0ba1c8 as an example of
what's been busted since inception. inotify needs to know internal semantics
of superblock destruction and unmounting to function. The inode pinning and
vfs contortions are horrible.
no fsnotify implementers do allocation under locks. This means things like
f04b30de3 which (due to an overabundance of caution) changes GFP_KERNEL to
GFP_NOFS can be reverted. There are no longer any allocation rules when using
or implementing your own fsnotify listener.
fsnotify paves the way for fanotify. In brief fanotify is a notification
mechanism that delivers the lisener both an 'event' and an open file descriptor
to the object in question. This means that fanotify is pathname agnostic.
Some on lkml may not care for the original companies or users that pushed for
TALPA, but fanotify was designed with flexibility and input for other users in
mind. The readahead group expressed interest in fanotify as it could be used
to profile disk access on boot without breaking the audit system. The desktop
search groups have also expressed interest in fanotify as it solves a number
of the race conditions and problems present with managing inotify when more
than a limited number of specific files are of interest. fanotify can provide
for a userspace access control system which makes it a clean interface for AV
vendors to hook without trying to do binary patching on the syscall table,
LSM, and everywhere else they do their things today. With this patch series
fanotify can be implemented in less than 1200 lines of easy to review code.
Almost all of which is the socket based user interface.
This patch series builds fsnotify to the point that it can implement
dnotify and inotify_user. Patches exist and will be sent soon after
acceptance to finish the in kernel inotify conversion (audit) and implement
fanotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: remove never-used in6_addr option
cifs: add addr= mount option alias for ip=
[CIFS] Add mention of new mount parm (forceuid) to cifs readme
cifs: make overriding of ownership conditional on new mount options
cifs: fix IPv6 address length check
cifs: clean up set_cifs_acl interfaces
cifs: reorganize get_cifs_acl
[CIFS] Update readme to indicate change to default mount (serverino)
cifs: make serverino the default when mounting
cifs: rename cifs_iget to cifs_root_iget
cifs: make cnvrtDosUnixTm take a little-endian args and an offset
cifs: have cifs_NTtimeToUnix take a little-endian arg
cifs: tighten up default file_mode/dir_mode
cifs: fix artificial limit on reading symlinks
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits)
ext4: Avoid corrupting the uninitialized bit in the extent during truncate
ext4: Don't treat a truncation of a zero-length file as replace-via-truncate
ext4: fix dx_map_entry to support 256k directory blocks
ext4: truncate the file properly if we fail to copy data from userspace
ext4: Avoid leaking blocks after a block allocation failure
ext4: Change all super.c messages to print the device
ext4: Get rid of EXTEND_DISKSIZE flag of ext4_get_blocks_handle()
ext4: super.c whitespace cleanup
jbd2: Fix minor typos in comments in fs/jbd2/journal.c
ext4: Clean up calls to ext4_get_group_desc()
ext4: remove unused function __ext4_write_dirty_metadata
ext2: Fix memory leak in ext2_fill_super() in case of a failed mount
ext3: Fix memory leak in ext3_fill_super() in case of a failed mount
ext4: Fix memory leak in ext4_fill_super() in case of a failed mount
ext4: down i_data_sem only for read when walking tree for fiemap
ext4: Add a comprehensive block validity check to ext4_get_blocks()
ext4: Clean up ext4_get_blocks() so it does not depend on bh_result->b_state
ext4: Merge ext4_da_get_block_write() into mpage_da_map_blocks()
ext4: Add BUG_ON debugging checks to noalloc_get_block_write()
ext4: Add documentation to the ext4_*get_block* functions
...
There are allocations for which the main pointer cannot be found but
they are not memory leaks. This patch fixes some of them. For more
information on false positives, see Documentation/kmemleak.txt.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* serial-from-alan: (79 commits)
moxa: prevent opening unavailable ports
imx: serial: use tty_encode_baud_rate to set true rate
imx: serial: add IrDA support to serial driver
imx: serial: use rational library function
lib: isolate rational fractions helper function
imx: serial: handle initialisation failure correctly
imx: serial: be sure to stop xmit upon shutdown
imx: serial: notify higher layers in case xmit IRQ was not called
imx: serial: fix one bit field type
imx: serial: fix whitespaces (no changes in functionality)
tty: use prepare/finish_wait
tty: remove sleep_on
sierra: driver interface blacklisting
sierra: driver urb handling improvements
tty: resolve some sierra breakage
timbuart: Fix the termios logic
serial: Added Timberdale UART driver
tty: Add URL for ttydev queue
devpts: unregister the file system on error
tty: Untangle termios and mm mutex dependencies
...
During tree log replay, we read in the tree log roots,
process them and then free them. A recent change
takes an extra reference on the root node of the tree
when the root is read in, and stores that reference
in root->commit_root.
This reference was not being freed, leaving us with
one buffer pinned in ram for each subvol with
a tree log root after a crash.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
lookup_inline_extent_backref only checks for duplicate backref for data
extents. It assumes backrefs for tree block never conflict.
This patch makes lookup_inline_extent_backref check for duplicate backrefs
for both data and tree block, so that we can detect potential bug earlier.
This is a safety check, strictly speaking it is not required.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
This patch fixes a bug which may result race condition
between btrfs_start_workers() and worker_loop().
btrfs_start_workers() executed in a parent thread writes
on workers->worker and worker_loop() in a child thread
reads workers->worker. However, there is no synchronization
enforcing the order of two operations.
This patch makes btrfs_start_workers() fill workers->worker
before it starts a child thread with worker_loop()
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: fix typo in sched-rt-group.txt file
ftrace: fix typo about map of kernel priority in ftrace.txt file.
sched: properly define the sched_group::cpumask and sched_domain::span fields
sched, timers: cleanup avenrun users
sched, timers: move calc_load() to scheduler
sched: Don't export sched_mc_power_savings on multi-socket single core system
sched: emit thread info flags with stack trace
sched: rt: document the risk of small values in the bandwidth settings
sched: Replace first_cpu() with cpumask_first() in ILB nomination code
sched: remove extra call overhead for schedule()
sched: use group_first_cpu() instead of cpumask_first(sched_group_cpus())
wait: don't use __wake_up_common()
sched: Nominate a power-efficient ilb in select_nohz_balancer()
sched: Nominate idle load balancer from a semi-idle package.
sched: remove redundant hierarchy walk in check_preempt_wakeup
write_dev_supers is called in sequence. First is it called with wait == 0,
which starts IO on all of the super blocks for a given device. Then it is
called with wait == 1 to make sure they all reach the disk.
It doesn't currently pin the buffers between the two calls, and it also
assumes the buffers won't go away between the two calls, leading to
an oops if the VM manages to free the buffers in the middle of the sync.
This fixes that assumption and updates the code to return an error if things
are not up to date when the wait == 1 run is done.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On multi-device filesystems, btrfs writes supers to all of the devices
before considering a sync complete. There wasn't any additional
locking between super writeout and the device list management code
because device management was done inside a transaction and
super writeout only happened with no transation writers running.
With the btrfs fsync log and other async transaction updates, this
has been racey for some time. This adds a mutex to protect
the device list. The existing volume mutex could not be reused due to
transaction lock ordering requirements.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This option was never used to my knowledge. Remove it before someone
does...
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The unitialized bit was not properly getting preserved in in an extent
which is partially truncated because the it was geting set to the
value of the first extent to be removed or truncated as part of the
truncate operation, and if there are multiple extents are getting
removed or modified as part of the truncate operation, it is only the
last extent which will might be partially truncated, and its
uninitalized bit is not necessarily the same as the first extent to be
truncated.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When you look in /proc/mounts, the address of the server gets displayed
as "addr=". That's really a better option to use anyway since it's more
generic. What if we eventually want to support non-IP transports? It
also makes CIFS option consistent with the NFS option of the same name.
Begin the migration to that option name by adding an alias for ip=
called addr=.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
... otherwise generic_permission() will allow *anything* for all
files you don't own and that have some group permissions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In btrfs, fdatasync and fsync are identical, but
fdatasync should skip committing transaction when
inode->i_state is set just I_DIRTY_SYNC and this indicates
only atime or/and mtime updates.
Following patch improves fdatasync throughput.
--file-block-size=4K --file-total-size=16G --file-test-mode=rndwr
--file-fsync-mode=fdatasync run
Results:
-2.6.30-rc8
Test execution summary:
total time: 1980.6540s
total number of events: 10001
total time taken by event execution: 1192.9804
per-request statistics:
min: 0.0000s
avg: 0.1193s
max: 15.3720s
approx. 95 percentile: 0.7257s
Threads fairness:
events (avg/stddev): 625.0625/151.32
execution time (avg/stddev): 74.5613/9.46
-2.6.30-rc8-patched
Test execution summary:
total time: 1695.9118s
total number of events: 10000
total time taken by event execution: 871.3214
per-request statistics:
min: 0.0000s
avg: 0.0871s
max: 10.4644s
approx. 95 percentile: 0.4787s
Threads fairness:
events (avg/stddev): 625.0000/131.86
execution time (avg/stddev): 54.4576/8.98
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There's no need to preserve this abstraction; it used to let us use
hardware crc32c support directly, but libcrc32c is already doing that for us
through the crypto API -- so we're already using the Intel crc32c
acceleration where appropriate.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add support for the standard attributes set via chattr and read via
lsattr. Currently we store the attributes in the flags value in
the btrfs inode, but I wonder whether we should split it into two so
that we don't have to keep converting between the two formats.
Remove the btrfs_clear_flag/btrfs_set_flag/btrfs_test_flag macros
as they were confusing the existing code and got in the way of the
new additions.
Also add the FS_IOC_GETVERSION ioctl for getting i_generation as it's
trivial.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
During mount, btrfs will check the queue nonrot flag
for all the devices found in the FS. If they are all
non-rotating, SSD mode is enabled by default.
If the FS was mounted with -o nossd, the non-rotating
flag is ignored.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Some SSDs perform best when reusing block numbers often, while
others perform much better when clustering strictly allocates
big chunks of unused space.
The default mount -o ssd will find rough groupings of blocks
where there are a bunch of free blocks that might have some
allocated blocks mixed in.
mount -o ssd_spread will make sure there are no allocated blocks
mixed in. It should perform better on lower end SSDs.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In SSD mode for data, and all the time for metadata the allocator
will try to find a cluster of nearby blocks for allocations. This
commit adds extra checks to make sure that each free block in the
cluster is close to the last one.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The btrfs IO submission threads try to service a bunch of devices with a small
number of threads. They do a congestion check to try and avoid waiting
on requests for a busy device.
The checks make sure we've sent a few requests down to a given device just so
that we aren't bouncing between busy devices without actually sending down
any IO. The counter used to decide if we can switch to the next device
is somewhat overloaded. It is also being used to decide if we've done
a good batch of requests between the WRITE_SYNC or regular priority lists.
It may get reset to zero often, leaving us hammering on a busy device
instead of moving on to another disk.
This commit adds a new counter for the number of bios sent while
servicing a device. It doesn't get reset or fiddled with. On
multi-device filesystems, this fixes IO stalls in streaming
write workloads.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs uses dedicated threads to submit bios when checksumming is on,
which allows us to make sure the threads dedicated to checksumming don't get
stuck waiting for requests. For each btrfs device, there are
two lists of bios. One list is for WRITE_SYNC bios and the other
is for regular priority bios.
The IO submission threads used to process all of the WRITE_SYNC bios first and
then switch to the regular bios. This commit makes sure we don't completely
starve the regular bios by rotating between the two lists.
WRITE_SYNC bios are still favored 2:1 over the regular bios, and this tries
to run in batches to avoid seeking. Benchmarking shows this eliminates
stalls during streaming buffered writes on both multi-device and
single device filesystems.
If the regular bios starve, the system can end up with a large amount of ram
pinned down in writeback pages. If we are a little more fair between the two
classes, we're able to keep throughput up and make progress on the bulk of
our dirty ram.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Once a metadata block has been written, it must be recowed, so the
btrfs dirty balancing call has a check to make sure a fair amount of metadata
was actually dirty before it started writing it back to disk.
A previous commit had changed the dirty tracking for metadata without
updating the btrfs dirty balancing checks. This commit switches it
to use the correct counter.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The block allocator in SSD mode will try to find groups of free blocks
that are close together. This commit makes it loop less on a given
group size before bumping it.
The end result is that we are less likely to fill small holes in the
available free space, but we don't waste as much CPU building the
large cluster used by ssd mode.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With the new back reference code, the cost of a balance has gone down
in terms of the number of back reference updates done. This commit
makes us more aggressively balance leaves and nodes as they become
less full.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When the delayed reference code was added, some checks were added
to avoid extra balancing while the delayed references were being flushed.
This made for less efficient btrees, but it reduced the chances of
loops where no forward progress was made because the balances made
more delayed ref updates.
With the new dead root removal code and the mixed back references,
the extent allocation tree is no longer using precise back refs, and
the delayed reference updates don't carry the risk of looping forever
anymore. So, the balance avoidance is no longer required.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.
When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one. At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.
The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root. This commit reduces the
transaction overhead by avoiding the need for dead root records.
When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.
This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.
We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.
This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.
This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.
This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.
The improved balancing code scales significantly better with a large
number of snapshots.
This is a very large commit and was written in a number of
pieces. But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There are some 'start = state->end + 1;' like code in set_extent_bit
and clear_extent_bit. They overflow when end == (u64)-1.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch rips out the XFS ACL handling code and uses the generic
fs/posix_acl.c code instead. The ondisk format is of course left
unchanged.
This also introduces the same ACL caching all other Linux filesystems do
by adding pointers to the acl and default acl in struct xfs_inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Although get_block() callback function can return extent of contiguous
blocks with bh->b_size, nilfs_get_block() function did not support
this feature.
This adds contiguous lookup feature to the block mapping codes of
nilfs, and allows the nilfs_get_blocks() function to return the extent
information by applying the feature.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies block_sync_page() function to the sync_page method of
page caches for meta data files, gc page caches, and btree node
buffers. This is a companion patch of ("nilfs2: enable sync_page
mothod") which applied the function for data pages.
This allows lock_page() for those meta data to unplug pending bio
requests.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, default_backing_dev_info was used for the mapping of btree
node caches. This uses device dependent backing_dev_info to allow
detailed control of the device for the btree node pages.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This helps userland programs like the rmcp command to distinguish
error codes returned against a checkpoint removal request.
Previously -EPERM was returned, and not discriminable from real
permission errors. This also allows removal of the latest checkpoint
because the deletion leads to create a new checkpoint, and thus it's
harmless for the filesystem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds a missing sync_page method which unplugs bio requests when
waiting for page locks. This will improve read performance of nilfs.
Here is a measurement result using dd command.
Without this patch:
# mount -t nilfs2 /dev/sde1 /test
# dd if=/test/aaa of=/dev/null bs=512k
1024+0 records in
1024+0 records out
536870912 bytes (537 MB) copied, 6.00688 seconds, 89.4 MB/s
With this patch:
# mount -t nilfs2 /dev/sde1 /test
# dd if=/test/aaa of=/dev/null bs=512k
1024+0 records in
1024+0 records out
536870912 bytes (537 MB) copied, 3.54998 seconds, 151 MB/s
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This sets BIO_RW_UNPLUG flag on the last bio of each segment during
write. The last bio should be unplugged immediately because the
caller waits for the completion after the submission.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs has some ioctl commands to read out metadata from meta data
files:
- NILFS_IOCTL_GET_CPINFO for checkpoint file,
- NILFS_IOCTL_GET_SUINFO for segment usage file, and
- NILFS_IOCTL_GET_VINFO for Disk Address Transalation (DAT) file,
respectively.
Every routine on these metadata files is implemented so that it allows
future expansion of on-disk format. But, the above ioctl commands do
not support expansion even though nilfs_argv structure can handle
arbitrary size for data exchanged via ioctl.
This allows future expansion of the following structures which give
basic format of the "get information" ioctls:
- struct nilfs_cpinfo
- struct nilfs_suinfo
- struct nilfs_vinfo
So, this introduces forward compatility of such ioctl commands.
In this patch, a sanity check in nilfs_ioctl_get_info() function is
changed to accept larger data structure [1], and metadata read
routines are rewritten so that they become compatible for larger
structures; the routines will just ignore the remaining fields which
the current version of nilfs doesn't know.
[1] The ioctl function already has another upper limit (PAGE_SIZE
against a structure, which appears in nilfs_ioctl_wrap_copy
function), and this will not cause security problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Hi,
I introduced "is_partially_uptodate" aops for NILFS2.
A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.
I did a performance test using the sysbench.
1 --file-block-size=8K --file-total-size=2G --file-test-mode=rndrw --file-fsync-freq=0 --fil
e-rw-ratio=1 run
-2.6.30-rc5
Test execution summary:
total time: 151.2907s
total number of events: 200000
total time taken by event execution: 2409.8387
per-request statistics:
min: 0.0000s
avg: 0.0120s
max: 0.9306s
approx. 95 percentile: 0.0439s
Threads fairness:
events (avg/stddev): 12500.0000/238.52
execution time (avg/stddev): 150.6149/0.01
-2.6.30-rc5-patched
Test execution summary:
total time: 140.8828s
total number of events: 200000
total time taken by event execution: 2240.8577
per-request statistics:
min: 0.0000s
avg: 0.0112s
max: 0.8750s
approx. 95 percentile: 0.0418s
Threads fairness:
events (avg/stddev): 12500.0000/218.43
execution time (avg/stddev): 140.0536/0.01
arch: ia64
pagesize: 16k
Thanks.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, the bmap codes of nilfs used three types of function
tables. The abuse of indirect function calls decreased source
readability and suffered many indirect jumps which would confuse
branch prediction of processors.
This eliminates one type of the function tables,
nilfs_bmap_ptr_operations, which was used to dispatch low level
pointer operations of the nilfs bmap.
This adds a new integer variable "b_ptr_type" to nilfs_bmap struct,
and uses the value to select the pointer operations.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will cut off 16 bytes from the nilfs_bmap struct which is
embedded in the on-memory inode of nilfs.
The b_high field was never used, and the b_low field stores a constant
value which can be determined by whether the inode uses btree for
block mapping or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This indirect function is set to NULL only for gc cache inodes, but
the gc cache inodes never call this function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Two get block function for btree nodes, nilfs_bmap_get_block() and
nilfs_bmap_get_new_block(), are called only from the btree codes.
This relocation will increase opportunities of compiler optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_bmap_delete_block() is a wrapper function calling
nilfs_btnode_delete(). This removes it for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_bmap_put_block() is a wrapper function calling brelse(). This
eliminates the wrapper for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will eliminate obsolete list operations of nilfs_segment_entry
structure which has been used to handle mutiple segment numbers.
The patch ("nilfs2: remove list of freeing segments") removed use of
the structure from the segment constructor code, and this patch
simplifies the remaining code by integrating it into recovery.c.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This will clean up the removal list of segments and the related
functions from segment.c and ioctl.c, which have hurt code
readability.
This elimination is applied by using nilfs_sufile_updatev() previously
introduced in the patch ("nilfs2: add sufile function that can modify
multiple segment usages").
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This is a preparation for the later cleanup patch ("nilfs2: remove
list of freeing segments").
This adds nilfs_sufile_updatev() to sufile, which can modify multiple
segment usages at a time.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This simplifies some low level functions of bmap.
Three bmap pointer operations, nilfs_bmap_start_v(),
nilfs_bmap_commit_v(), and nilfs_bmap_abort_v(), are unified into one
nilfs_bmap_start_v() function. And the related indirect function calls
are replaced with it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
libosd users that need to work with bios, must sometime use
the request_queue associated with the osd_dev. Make a wrapper for
that, and convert all in-tree users.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
For supporting of chained-bios we can not inspect the first
bio only, as before. Caller shall pass the total length of the
request, ie. sum_bytes(bio-chain).
Also since the bio might be a chain we don't set it's direction
on behalf of it's callers. The bio direction should be properly
set prior to this call. So fix a couple of write users that now
need to set the bio direction properly
[In this patch I change both library code and user sites at
exofs, to make it easy on integration. It should be submitted
via James's scsi-misc tree.]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Jeff Garzik <jeff@garzik.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
By popular demand, define usefull wrappers for osd_req_read/write
that recieve kernel pointers. All users had their own.
Also remove these from exofs
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Theodore Ts'o