Send dma address as value to function arguments instead of pointer.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Send input as IV | AAD | Data. It will allow sending IV as Immediate
Data and Creates space in Work request to add more dma mapped entries.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/chelsio/chcr_ipsec.c: In function 'chcr_ipsec_xmit':
drivers/crypto/chelsio/chcr_ipsec.c:674:33: warning:
variable 'kctx_len' set but not used [-Wunused-but-set-variable]
unsigned int flits = 0, ndesc, kctx_len;
It not used since commit 8362ea16f6 ("crypto: chcr - ESN for Inline IPSec Tx")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns when one enumerated type is implicitly converted to another:
drivers/crypto/ux500/hash/hash_core.c:169:4: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
direction, DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
^~~~~~~~~
1 warning generated.
dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
We know that the only direction supported by this function is
DMA_TO_DEVICE because of the check at the top of this function so we can
just use the equivalent value from dma_transfer_direction.
DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns when one enumerated type is implicitly converted to another:
drivers/crypto/ux500/cryp/cryp_core.c:559:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
direction, DMA_CTRL_ACK);
^~~~~~~~~
drivers/crypto/ux500/cryp/cryp_core.c:583:5: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
direction,
^~~~~~~~~
2 warnings generated.
dmaengine_prep_slave_sg expects an enum from dma_transfer_direction.
Because we know the value of the dma_data_direction enum from the
switch statement, we can just use the proper value from
dma_transfer_direction so there is no more conversion.
DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the appropriate scatter/gather stubs to the avx asm.
In the C code, we can now always use crypt_by_sg, since both
sse and asm code now support scatter/gather.
Introduce a new struct, aesni_gcm_tfm, that is initialized on
startup to point to either the SSE, AVX, or AVX2 versions of the
four necessary encryption/decryption routines.
GENX_OPTSIZE is still checked at the start of crypt_by_sg. The
total size of the data is checked, since the additional overhead
is in the init function, calculating additional HashKeys.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before this diff, multiple calls to GCM_ENC_DEC will
succeed, but only if all calls are a multiple of 16 bytes.
Handle partial blocks at the start of GCM_ENC_DEC, and update
aadhash as appropriate.
The data offset %r11 is also updated after the partial block.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Introduce READ_PARTIAL_BLOCK macro, and use it in the two existing
partial block cases: AAD and the end of ENC_DEC. In particular,
the ENC_DEC case should be faster, since we read by 8/4 bytes if
possible.
This macro will also be used to read partial blocks between
enc_update and dec_update calls.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prepare to handle partial blocks between scatter/gather calls.
For the last partial block, we only want to calculate the aadhash
in GCM_COMPLETE, and a new partial block macro will handle both
aadhash update and encrypting partial blocks between calls.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fill in aadhash, aadlen, pblocklen, curcount with appropriate values.
pblocklen, aadhash, and pblockenckey are also updated at the end
of each scatter/gather operation, to be carried over to the next
operation.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The precompute functions differ only by the sub-macros
they call, merge them to a single macro. Later diffs
add more code to fill in the gcm_context_data structure,
this allows changes in a single place.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AAD hash only needs to be calculated once for each scatter/gather operation.
Move it to its own macro, and call it from GCM_INIT instead of
INITIAL_BLOCKS.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merge encode and decode tag calculations in GCM_COMPLETE macro.
Scatter/gather routines will call this once at the end of encryption
or decryption.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for 192/256-bit keys using the avx gcm/aes routines.
The sse routines were previously updated in e31ac32d3b (Add support
for 192 & 256 bit keys to AESNI RFC4106).
Instead of adding an additional loop in the hotpath as in e31ac32d3b,
this diff instead generates separate versions of the code using macros,
and the entry routines choose which version once. This results
in a 5% performance improvement vs. adding a loop to the hot path.
This is the same strategy chosen by the intel isa-l_crypto library.
The key size checks are removed from the c code where appropriate.
Note that this diff depends on using gcm_context_data - 256 bit keys
require 16 HashKeys + 15 expanded keys, which is larger than
struct crypto_aes_ctx, so they are stored in struct gcm_context_data.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Macro-ify function save and restore. These will be used in new functions
added for scatter/gather update operations.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the gcm_context_data structure to the avx asm routines.
This will be necessary to support both 256 bit keys and
scatter/gather.
The pre-computed HashKeys are now stored in the gcm_context_data
struct, which is expanded to hold the greater number of hashkeys
necessary for avx.
Loads and stores to the new struct are always done unlaligned to
avoid compiler issues, see e5b954e8 "Use unaligned loads from
gcm_context_data"
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The GCM_ENC_DEC routines for AVX and AVX2 are identical, except they
call separate sub-macros. Pass the macros as arguments, and merge them.
This facilitates additional refactoring, by requiring changes in only
one place.
The GCM_ENC_DEC macro was moved above the CONFIG_AS_AVX* ifdefs,
since it will be used by both AVX and AVX2.
Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_alg_mod_lookup() takes a reference to the hash algorithm but
crypto_init_shash_spawn() doesn't take ownership of it, hence the
reference needs to be dropped in adiantum_create().
Fixes: 059c2a4d8e ("crypto: adiantum - add Adiantum support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_MSG_GETALG in NLM_F_DUMP mode sometimes doesn't return all
registered crypto algorithms, because it doesn't support incremental
dumps. crypto_dump_report() only permits itself to be called once, yet
the netlink subsystem allocates at most ~64 KiB for the skb being dumped
to. Thus only the first recvmsg() returns data, and it may only include
a subset of the crypto algorithms even if the user buffer passed to
recvmsg() is large enough to hold all of them.
Fix this by using one of the arguments in the netlink_callback structure
to keep track of the current position in the algorithm list. Then
userspace can do multiple recvmsg() on the socket after sending the dump
request. This is the way netlink dumps work elsewhere in the kernel;
it's unclear why this was different (probably just an oversight).
Also fix an integer overflow when calculating the dump buffer size hint.
Fixes: a38f7907b9 ("crypto: Add userspace configuration API")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 2018-11-28 revision of the Adiantum paper has revised some notation:
- 'M' was replaced with 'L' (meaning "Left", for the left-hand part of
the message) in the definition of Adiantum hashing, to avoid confusion
with the full message
- ε-almost-∆-universal is now abbreviated as ε-∆U instead of εA∆U
- "block" is now used only to mean block cipher and Poly1305 blocks
Also, Adiantum hashing was moved from the appendix to the main paper.
To avoid confusion, update relevant comments in the code to match.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kernel's ChaCha20 uses the RFC7539 convention of the nonce being 12
bytes rather than 8, so actually I only appended 12 random bytes (not
16) to its test vectors to form 24-byte nonces for the XChaCha20 test
vectors. The other 4 bytes were just from zero-padding the stream
position to 8 bytes. Fix the comments above the test vectors.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a draft specification for XChaCha20 being worked on. Add the
XChaCha20 test vector from the appendix so that we can be extra sure the
kernel's implementation is compatible.
I also recomputed the ciphertext with XChaCha12 and added it there too,
to keep the tests for XChaCha20 and XChaCha12 in sync.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To improve responsiveness, yield the FPU (temporarily re-enabling
preemption) every 4 KiB encrypted/decrypted, rather than keeping
preemption disabled during the entire encryption/decryption operation.
Alternatively we could do this for every skcipher_walk step, but steps
may be small in some cases, and yielding the FPU is expensive on x86.
Suggested-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the x86_64 SIMD implementations of ChaCha20 and XChaCha20 have
been refactored to support varying the number of rounds, add support for
XChaCha12. This is identical to XChaCha20 except for the number of
rounds, which is 12 instead of 20. This can be used by Adiantum.
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding XChaCha12 support, rename/refactor the x86_64
SIMD implementations of ChaCha20 to support different numbers of rounds.
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an XChaCha20 implementation that is hooked up to the x86_64 SIMD
implementations of ChaCha20. This can be used by Adiantum.
An SSSE3 implementation of single-block HChaCha20 is also added so that
XChaCha20 can use it rather than the generic implementation. This
required refactoring the ChaCha permutation into its own function.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a 64-bit AVX2 implementation of NHPoly1305, an ε-almost-∆-universal
hash function used in the Adiantum encryption mode. For now, only the
NH portion is actually AVX2-accelerated; the Poly1305 part is less
performance-critical so is just implemented in C.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a 64-bit SSE2 implementation of NHPoly1305, an ε-almost-∆-universal
hash function used in the Adiantum encryption mode. For now, only the
NH portion is actually SSE2-accelerated; the Poly1305 part is less
performance-critical so is just implemented in C.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the stream cipher implementation is asynchronous, then the Adiantum
instance must be flagged as asynchronous as well. Otherwise someone
asking for a synchronous algorithm can get an asynchronous algorithm.
There are no asynchronous xchacha12 or xchacha20 implementations yet
which makes this largely a theoretical issue, but it should be fixed.
Fixes: 059c2a4d8e ("crypto: adiantum - add Adiantum support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To some degree, most known AArch64 micro-architectures appear to be
able to issue ALU instructions in parellel to SIMD instructions
without affecting the SIMD throughput. This means we can use the ALU
to process a fifth ChaCha block while the SIMD is processing four
blocks in parallel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the 4-way NEON ChaCha routine so it can handle input of any
length >64 bytes in its entirety, rather than having to call into
the 1-way routine and/or memcpy()s via temp buffers to handle the
tail of a ChaCha invocation that is not a multiple of 256 bytes.
On inputs that are a multiple of 256 bytes (and thus in tcrypt
benchmarks), performance drops by around 1% on Cortex-A57, while
performance for inputs drawn randomly from the range [64, 1024)
increases by around 30%.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to have better coverage of algorithms operating on block
sizes that are in the ballpark of a VPN packet, add 1472 to the
block_sizes array.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enabled the PF->VF Mailbox support. Mailbox message are interpreted
as {type, opcode, data}. Supported message types are REQ, ACK and NACK.
Signed-off-by: Srikanth Jampala <Jampala.Srikanth@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the ARM64 NEON implementation of ChaCha20 and XChaCha20 has
been refactored to support varying the number of rounds, add support for
XChaCha12. This is identical to XChaCha20 except for the number of
rounds, which is 12 instead of 20. This can be used by Adiantum.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding XChaCha12 support, rename/refactor the ARM64
NEON implementation of ChaCha20 to support different numbers of rounds.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an XChaCha20 implementation that is hooked up to the ARM64 NEON
implementation of ChaCha20. This can be used by Adiantum.
A NEON implementation of single-block HChaCha20 is also added so that
XChaCha20 can use it rather than the generic implementation. This
required refactoring the ChaCha20 permutation into its own function.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an ARM64 NEON implementation of NHPoly1305, an ε-almost-∆-universal
hash function used in the Adiantum encryption mode. For now, only the
NH portion is actually NEON-accelerated; the Poly1305 part is less
performance-critical so is just implemented in C.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # big-endian
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Send SPI, 64b seq nos and 64b IV with aadiv drop for inline crypto.
This information is added in outgoing packet after the CPL TX PKT XT
and removed by hardware.
The aad, auth and cipher offsets are then adjusted for ESN enabled tunnel.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Immediate packets sent to hardware should include the work
request length in calculating the flits. WR occupy one flit and
if not accounted result in invalid request which stalls the HW
queue.
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch add the crypto_stats_init() function.
This will permit to remove some ifdef from __crypto_register_alg().
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since now all crypto stats are on their own structures, it is now
useless to have the algorithm name in the err_cnt member.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Like for userspace, this patch splits stats into multiple structures,
one for each algorithm class.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The use of the v64 intermediate variable is useless, and removing it
bring to much readable code.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some error count use the wrong name for getting this data.
But this had not caused any reporting problem, since all error count are shared in the same
union.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All crypto_stats functions use the struct xxx_request for feeding stats,
but in some case this structure could already be freed.
For fixing this, the needed parameters (len and alg) will be stored
before the request being executed.
Fixes: cac5818c25 ("crypto: user - Implement a generic crypto statistics")
Reported-by: syzbot <syzbot+6939a606a5305e9e9799@syzkaller.appspotmail.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the getstat example tool to the recent changes done in crypto_user_stat
- changed all stats to u64
- separated struct stats for each crypto alg
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is cleaner to have each stat in their own structures.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All the 32-bit fields need to be 64-bit. In some cases, UINT32_MAX crypto
operations can be done in seconds.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Harsh Jain