mirror of https://gitee.com/openkylin/linux.git
316 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
854e80bcfd |
ARM: devicetree updates for v5.7
Most of the commits are for additional hardware support and minor fixes
for existing machines for all the usual platforms: qcom, amlogic, at91,
gemini, mediatek, ti, socfpga, i.mx, layerscape, uniphier, rockchip,
exynos, ux500, mvebu, tegra, stm32, renesas, sunxi, broadcom, omap,
and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation.
Andre Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into
dts files, for many devices that relied on a mix of auxiliary data
in addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants, along
with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based on
the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=ye2F
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
|
|
|
Tony Lindgren
|
1bf4b15b19 |
clk: ti: Fix dm814x clkctrl for ethernet
We are missing alwon ethernet clock for dm814x and this prevents us
from probing the CPSW with device tree only data. Looks like Ethernet
currently only works if it has been enabled in the bootloader.
Looks like relying on the bootloader clocks is not an issue with the
mainline kernel currently, but it will be an issue when configuring
CPSW Ethernet to probe with device tree data only as we will be managing
the clocks.
Fixes:
|
|
|
Tony Lindgren
|
5f3d9b07b9 |
clk: ti: am43xx: Fix clock parent for RTC clock
Currently enabling clkctrl clock on am4 can fail for RTC as the clock
parent is wrong for RTC.
Fixes:
|
|
|
Linus Torvalds
|
4ef1a30c6b |
ARM: SoC: late updates
This is some material that we picked up into our tree late, or that had
more complex dependencies on more than one topic branch that makes sense
to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to better
reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards
-----BEGIN PGP SIGNATURE-----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=R7GU
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Olof Johansson:
"This is some material that we picked up into our tree late, or that
had more complex dependencies on more than one topic branch that makes
sense to keep separately.
- TI support for secure accelerators and hwrng on OMAP4/5
- TI camera changes for dra7 and am437x and SGX improvement due to
better reset control support on am335x, am437x and dra7
- Davinci moves to proper clocksource on DM365, and regulator/audio
improvements for DM365 and DM644x eval boards"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem
ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt
ARM: dts: Configure interconnect target module for am437x sgx
ARM: dts: Configure sgx for dra7
ARM: dts: Configure rstctrl reset for am335x SGX
ARM: dts: dra7: Add ti-sysc node for VPE
ARM: dts: dra7: add vpe clkctrl node
ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries
ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries
ARM: dts: am43xx: add support for clkout1 clock
arm: dts: dra76-evm: Add CAL and OV5640 nodes
arm: dtsi: dra76x: Add CAL dtsi node
arm: dts: dra72-evm-common: Add entries for the CSI2 cameras
ARM: dts: DRA72: Add CAL dtsi node
ARM: dts: dra7-l4: Add ti-sysc node for CAM
ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only
ARM: dts: dra7: add cam clkctrl node
ARM: OMAP2+: Drop legacy platform data for omap4 des
ARM: OMAP2+: Drop legacy platform data for omap4 sham
ARM: OMAP2+: Drop legacy platform data for omap4 aes
...
|
|
|
Linus Torvalds
|
f4a6365ae8 |
There are a few changes to the core framework this time around, in addition to
the normal collection of driver updates to support new SoCs, fix incorrect
data, and convert various drivers to clk_hw based APIs.
In the core, we allow clk_ops::init() to return an error code now so that we
can fail clk registration if the callback does something like fail to allocate
memory. We also add a new "terminate" clk_op so that things done in
clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now
when critical clks fail to enable and we support changing clk rates and
enable/disable state through debugfs when developers compile the kernel
themselves.
On the driver front, we get support for what seems like a lot of Qualcomm and
NXP SoCs given that those vendors dominate the diffstat. There are a couple new
drivers for Xilinx and Amlogic SoCs too. The updates are all small things like
fixing the way glitch free muxes switch parents, avoiding div-by-zero problems,
or fixing data like parent names. See the updates section below for more
details.
Finally, the "basic" clk types have been converted to support specifying
parents with clk_hw pointers. This work includes an overhaul of the fixed-rate
clk type to be more modern by using clk_hw APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting
-----BEGIN PGP SIGNATURE-----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=UjXu
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There are a few changes to the core framework this time around, in
addition to the normal collection of driver updates to support new
SoCs, fix incorrect data, and convert various drivers to clk_hw based
APIs.
In the core, we allow clk_ops::init() to return an error code now so
that we can fail clk registration if the callback does something like
fail to allocate memory. We also add a new "terminate" clk_op so that
things done in clk_ops::init() can be undone, e.g. free memory. We
also spit out a warning now when critical clks fail to enable and we
support changing clk rates and enable/disable state through debugfs
when developers compile the kernel themselves.
On the driver front, we get support for what seems like a lot of
Qualcomm and NXP SoCs given that those vendors dominate the diffstat.
There are a couple new drivers for Xilinx and Amlogic SoCs too. The
updates are all small things like fixing the way glitch free muxes
switch parents, avoiding div-by-zero problems, or fixing data like
parent names. See the updates section below for more details.
Finally, the "basic" clk types have been converted to support
specifying parents with clk_hw pointers. This work includes an
overhaul of the fixed-rate clk type to be more modern by using clk_hw
APIs.
Core:
- Let clk_ops::init() return an error code
- Add a clk_ops::terminate() callback to undo clk_ops::init()
- Warn about critical clks that fail to enable or prepare
- Support dangerous debugfs actions on clks with dead code
New Drivers:
- Support for Xilinx Versal platform clks
- Display clk controller on qcom sc7180
- Video clk controller on qcom sc7180
- Graphics clk controller on qcom sc7180
- CPU PLLs for qcom msm8916
- Move qcom msm8974 gfx3d clk to RPM control
- Display port clk support on qcom sdm845 SoCs
- Global clk controller on qcom ipq6018
- Add a driver for BCLK of Freescale SAI cores
- Add cam, vpe and sgx clock support for TI dra7
- Add aess clock support for TI omap5
- Enable clks for CPUfreq on Allwinner A64 SoCs
- Add Amlogic meson8b DDR clock controller
- Add input clocks to Amlogic meson8b controllers
- Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2
- i.MX8MP clk driver support
Updates:
- Convert gpio, fixed-factor, mux, gate, divider basic clks to hw
based APIs
- Detect more PRMCU variants in ux500 driver
- Adjust the composite clk type to new way of describing clk parents
- Fixes for clk controllers on qcom msm8998 SoCs
- Fix gmac main clock for TI dra7
- Move TI dra7-atl clock header to correct location
- Fix hidden node name dependency on TI clkctrl clocks
- Fix Amlogic meson8b mali clock update using the glitch free mux
- Fix Amlogic pll driver division by zero at init
- Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config
symbols
- Switch more i.MX clk drivers to clk_hw based APIs
- Disable non-functional divider between pll4_audio_div and
pll4_post_div on imx6q
- Fix watchdog2 clock name typo in imx7ulp clock driver
- Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M
SoCs
- Suppress bind attrs for i.MX8M clock driver
- Add a big comment in imx8qxp-lpcg driver to tell why
devm_platform_ioremap_resource() shouldn't be used for the driver
- A correction on i.MX8MN usb1_ctrl parent clock setting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits)
dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id
clk: ls1028a: Fix warning on clamp() usage
clk: qoriq: add ls1088a hwaccel clocks support
clk: ls1028a: Add clock driver for Display output interface
dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings
clk: fsl-sai: new driver
dt-bindings: clock: document the fsl-sai driver
clk: composite: add _register_composite_pdata() variants
clk: qcom: rpmh: Sort OF match table
dt-bindings: fix warnings in validation of qcom,gcc.yaml
dt-binding: fix compilation error of the example in qcom,gcc.yaml
clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag
clk: zynqmp: Fix divider calculation
clk: zynqmp: Add support for get max divider
clk: zynqmp: Warn user if clock user are more than allowed
clk: zynqmp: Extend driver for versal
dt-bindings: clock: Add bindings for versal clock driver
clk: ti: clkctrl: Fix hidden dependency to node name
clk: ti: add clkctrl data dra7 sgx
clk: ti: omap5: Add missing AESS clock
...
|
|
|
Stephen Boyd
|
db865ee447 |
Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next
- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings |
|
|
Tony Lindgren
|
723a567f43 |
ARM: dts: Add missing omap5 secure clocks
The secure clocks on omap5 are similar to what we already have for dra7 with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in "Table 3-1044. CORE_CM_CORE Registers Mapping Summary". The secure clocks are part of the l4per clock manager. As the l4per clock manager has now two clock domains as children, let's also update the l4per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Compared to omap4, omap5 has more clocks working in hardare autogating mode. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Tony Lindgren
|
cfcbc2dbb7 |
ARM: dts: Add missing omap4 secure clocks
The secure clocks on omap4 are similar to what we already have for dra7 in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table 3-1346 L4PER_CM2 Registers Mapping Summary". The secure clocks are part of the l4_per clock manager. As the l4_per clock manager has now two clock domains as children, let's also update the l4_per clockdomain node name to follow the "clock" node naming with a domain specific compatible property. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Tony Lindgren
|
6c30905205 |
clk: ti: clkctrl: Fix hidden dependency to node name
We currently have a hidden dependency to the device tree node name for the clkctrl clocks. Instead of using standard node name like "clock", we must use "l4-per-clkctrl" type naming so the clock driver can find the associated clock domain. Further, if "clk" is specified for a clock node name, the driver sets TI_CLK_CLKCTRL_COMPAT flag that uses different logic for the clock name based on the parent node name for the all the clkctrl clocks for the SoC. If the clock node naming dependency is not understood, the related clockdomain is not found, or a wrong one can get used if a clock manager has multiple clock domains. As each clkctrl instance represents a single clock domain, let's allow using domain specific compatible names to specify the clock domain. This simplifies things and removes the hidden dependency to the node name. And then later on, after the node names have been standardized, we can drop the related code for parsing the node names. Let's also update the binding to use standard "clock" node naming instead of "clk" and add the missing description for reg. Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tony Lindgren
|
957ad44ff5 |
clk: ti: add clkctrl data dra7 sgx
This is similar to what we have for omap5 except the gpu_cm address is different, the mux clocks have one more source option, and there's no divider clock. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "gpu-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. For accessing the GPU, we also need to configure the interconnect target module for GPU similar to what we have for omap5, I'll send that change separately. Cc: Benoit Parrot <bparrot@ti.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Robert Nelson <robertcnelson@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tony Lindgren
|
364975eeb4 |
clk: ti: omap5: Add missing AESS clock
Looks like we're missing AESS clock for omap5. This is similar to what omap4 has. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Grygorii Strashko
|
69e3002837 |
clk: ti: dra7: fix parent for gmac_clkctrl
The parent clk for gmac clk ctrl has to be gmac_main_clk (125MHz) instead
of dpll_gmac_ck (1GHz). This is caused incorrect CPSW MDIO operation.
Hence, fix it.
Fixes:
|
|
|
Benoit Parrot
|
7dfd5e619d |
clk: ti: dra7: add vpe clkctrl data
Add clkctrl data for VPE. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Benoit Parrot
|
7054c14f05 |
clk: ti: dra7: add cam clkctrl data
Add clkctrl data for CAM domain. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Peter Ujfalusi
|
ad931a2d56 |
clk: ti: dra7-atl: Remove pm_runtime_irq_safe()
This is not needed for anything, and prevents proper PM transitions for parent devices which is bad in case of ti-sysc; this effectively kills PM completely. Thus, remove the flag. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lkml.kernel.org/r/20191114101718.20619-1-peter.ujfalusi@ti.com Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Jerome Brunet
|
89d079dc17 |
clk: let init callback return an error code
If the init callback is allowed to request resources, it needs a return value to report the outcome of such a request. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190924123954.31561-3-jbrunet@baylibre.com Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
ddebe839c6 |
This merge window we have one small clk provider API in the core framework and
then a bunch of driver updates and a handful of new drivers. In terms of
diffstat the Qualcomm and Amlogic drivers are high up there because of all the
clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work
done this cycle too to support suspend/resume and memory controllers. And the
OMAP clk driver got proper clk and reset handling in place.
Rounding out the patches are various updates to remove unused data, mark things
static, correct incorrect data in drivers, etc. All the little things that
improve drivers and maintain code health. I will point out that there's a patch
in here for the GPIO clk driver, that almost nobody uses, which changes
behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent.
Other than that things are fairly well SoC specific here.
Core:
- Add a clk provider API to get current parent index
- Plug a memory leak in clk_unregister() path
New Drivers:
- CGU in Ingenix X1000
- Bitmain BM1880 clks
- Qualcomm MSM8998 GPU clk controllers
- Qualcomm SC7180 GCC and RPMH clk controllers
- Qualcomm QCS404 Q6SSTOP clk controllers
- Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
- Add support for the Renesas RZ/G2N (r8a774b1) SoC
- Add Tegra20/30 External Memory Clock (EMC) support
Updates:
- Make gpio gate clks propagate rate setting up to parent
- Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
- Use struct_size() some more in various clk drivers
- Improve Rockchip px30 clk tree
- Add suspend/resume support to Tegra210 clk driver
- Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
- Allwinner DT exports and H6 clk tree fixes
- Proper clk and reset handling for OMAP SoCs
- Revamped TI divider clk to clamp max divider
- Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs
- Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
- Add VIDEO2_PLL clock for imx8mq
- Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
- Add sm1 support in the Amlogic audio clock controller
- Switch some clocks on R-Car Gen2/3 to .determine_rate()
- Remove Renesas R-Car Gen2 legacy DT clock support
- Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
- Improve Renesas R-Car Gen3 SD clock handling
- Add rate table for Samsung exynos542x GPU and VPLL clks
- Fix potential CPU performance degradation after system suspend/resume cycle
on exynos542x SoCs
-----BEGIN PGP SIGNATURE-----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=qJNg
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This merge window we have one small clk provider API in the core
framework and then a bunch of driver updates and a handful of new
drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
high up there because of all the clk data introcued by new drivers.
The Nvidia Tegra driver had a lot of work done this cycle too to
support suspend/resume and memory controllers. And the OMAP clk driver
got proper clk and reset handling in place.
Rounding out the patches are various updates to remove unused data,
mark things static, correct incorrect data in drivers, etc. All the
little things that improve drivers and maintain code health. I will
point out that there's a patch in here for the GPIO clk driver, that
almost nobody uses, which changes behavior and causes clk_set_rate()
to try to change the GPIO gate clk's parent. Other than that things
are fairly well SoC specific here.
Core:
- Add a clk provider API to get current parent index
- Plug a memory leak in clk_unregister() path
New Drivers:
- CGU in Ingenix X1000
- Bitmain BM1880 clks
- Qualcomm MSM8998 GPU clk controllers
- Qualcomm SC7180 GCC and RPMH clk controllers
- Qualcomm QCS404 Q6SSTOP clk controllers
- Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
- Add support for the Renesas RZ/G2N (r8a774b1) SoC
- Add Tegra20/30 External Memory Clock (EMC) support
Updates:
- Make gpio gate clks propagate rate setting up to parent
- Prepare Armada 3700 for suspend to RAM by moving PCIe
suspend/resume priority
- Drop unused variables, enums, etc. in various clk drivers
- Convert various drivers to use devm_platform_ioremap_resource()
- Use struct_size() some more in various clk drivers
- Improve Rockchip px30 clk tree
- Add suspend/resume support to Tegra210 clk driver
- Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
- Allwinner DT exports and H6 clk tree fixes
- Proper clk and reset handling for OMAP SoCs
- Revamped TI divider clk to clamp max divider
- Make 1443X/1416X PLL clock structure common for reusing among i.MX8
SoCs
- Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
- Add VIDEO2_PLL clock for imx8mq
- Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
- Add sm1 support in the Amlogic audio clock controller
- Switch some clocks on R-Car Gen2/3 to .determine_rate()
- Remove Renesas R-Car Gen2 legacy DT clock support
- Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
- Improve Renesas R-Car Gen3 SD clock handling
- Add rate table for Samsung exynos542x GPU and VPLL clks
- Fix potential CPU performance degradation after system
suspend/resume cycle on exynos542x SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
MAINTAINERS: Add entry for BM1880 SoC clock driver
clk: Add common clock driver for BM1880 SoC
dt-bindings: clock: Add devicetree binding for BM1880 SoC
clk: Add clk_hw_unregister_composite helper function definition
clk: Zero init clk_init_data in helpers
clk: ingenic: Allow drivers to be built with COMPILE_TEST
MAINTAINERS: Update section for Ux500 clock drivers
clk: mark clk_disable_unused() as __init
clk: Fix memory leak in clk_unregister()
clk: Ingenic: Add CGU driver for X1000.
dt-bindings: clock: Add X1000 bindings.
clk: tegra: Use match_string() helper to simplify the code
clk: pxa: fix one of the pxa RTC clocks
clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
clk: armada-xp: remove unused code
clk: tegra: Fix build error without CONFIG_PM_SLEEP
clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
clk: tegra: Optimize PLLX restore on Tegra20/30
clk: tegra: Add suspend and resume support on Tegra210
...
|
|
|
Stephen Kitt
|
7f6ac72946 |
clk/ti/adpll: allocate room for terminating null
The buffer allocated in ti_adpll_clk_get_name doesn't account for the terminating null. This patch switches to devm_kasprintf to avoid overflowing. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lkml.kernel.org/r/20191019140634.15596-1-steve@sk2.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
d988f8877b |
Fixes for various clk driver issues that happened because of code we
merged this merge window. The Amlogic driver was missing some flags causing rates to be rounded improperly or clk_set_rate() to fail. The Samsung driver wasn't freeing everything on error paths and improperly saving/restoring PLL state across suspend/resume. The at91 driver was calling msleep() too early when scheduling hadn't started, so we put in place a quick solution until we can handle this sort of problem in the core framework. There were also problems with the Allwinner driver and operator precedence being incorrect causing subtle bugs. Finally, the TI driver was duplicating aliases and not delaying long enough leading to some unexpected timeouts. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl3EsB8RHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSU+xQ//feEUr6Yg4GPdRJ41QVSTTEcANH/xhwv1 Ee7/uORWRFSpsFm99kWcc6VYcD76ElepJ7Kx67aqsVEn5z3GZ2CTM7+6Wn8B9z4s 5ZQU3ciS1+WIyiWgo3TCsTM8DKtNEJIugpG0MaERIgcA1ThQaNbwqZ1APg+fVdWm 1nNBw9XEraXWuCIOhzeCdFY4eDRZnmz4OVaY+mWqA+A5NbB3BfrlDumCaM5AyByM f5eT9kU4K5SV3U+2ZH0oo8UI1o6JjfYzTS6C/xkV5ITbyt7AQI5fsXJHrqWmVuYv aPR46d1uxJ4BmTwLM2nvZUrjUnbBweXiYE1yQ3+9P/q7AE//LSNnsGfk/00E7hxi vwi0a7jSHMOuLEyGFqr4/p8EgEKmyGB7TDX5UUZhpk3y5+7jsWHr3cuebJYy2LXk RRwvsmu7DoNJYfGEXLvF8PWCx03qEuaq2Bwjt4hfMwHGlMhNz3YkiGcJQqb5+bYr w0nhxiNobk9ylPq9Cpmbs7tn+QEyoFmS34nU45u6062Jn0WJajBp7nbO2kDo9FMF /25Tm4EHjUoKNv1knWc4ahn/RzFzJhMoVAz7BpudQCqGGHJVptosS5OyVFfZzSFQ nlxtzERfc1l7FbsfC2bMNQ8ae3UDWVqTB0gTNs9+dPuw3VQxWhN/6nkkq4eT29eh uvSYxPQeHrM= =0xes -----END PGP SIGNATURE----- Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Fixes for various clk driver issues that happened because of code we merged this merge window. The Amlogic driver was missing some flags causing rates to be rounded improperly or clk_set_rate() to fail. The Samsung driver wasn't freeing everything on error paths and improperly saving/restoring PLL state across suspend/resume. The at91 driver was calling msleep() too early when scheduling hadn't started, so we put in place a quick solution until we can handle this sort of problem in the core framework. There were also problems with the Allwinner driver and operator precedence being incorrect causing subtle bugs. Finally, the TI driver was duplicating aliases and not delaying long enough leading to some unexpected timeouts" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix failed to enable error with double udelay timeout clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup clk: ast2600: Fix enabling of clocks clk: at91: avoid sleeping early clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths clk: at91: sam9x60: fix programmable clock clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate |
|
|
Tony Lindgren
|
81a41901ff |
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
Commit |
|
|
Peter Ujfalusi
|
9982b0f69b |
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
ti_clk_register() calls it already so the driver should not create duplicated alias. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lkml.kernel.org/r/20191002083436.10194-1-peter.ujfalusi@ti.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Tero Kristo
|
8ffea6eef4 |
clk: ti: divider: convert to use min,max,mask instead of width
The existing width field used to check divider validity does not provide enough protection against bad values. For example, if max divider value is 4, the smallest all-1 bitmask that can hold this value is 7, which allows values higher than 4 to be used. This typically causes unpredictable results with hardware. So far this issue hasn't been noticed as most of the dividers actually have maximum values which fit the whole bitfield, but there are certain clocks for which this is a problem, like dpll4_m4 divider on omap3 devices. Thus, convert the whole validity logic to use min,max and mask values for determining if a specific divider is valid or not. This prevents the odd cases where bad value would otherwise be written to a divider config register. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Adam Ford <aford173@gmail.com> |
|
|
Tero Kristo
|
a229965cfe |
clk: ti: divider: cleanup ti_clk_parse_divider_data API
Cleanup the ti_clk_parse_divider_data to pass the divider data struct directly instead of individual values of it. This makes it easier to modify the implementation later on. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Adam Ford <aford173@gmail.com> |
|
|
Tero Kristo
|
fbbc185915 |
clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table
Cleanup couple of TI divider clock internal APIs. These currently pass huge amount of parameters, which makes it difficult to track what is going on. Abstract most of these under struct clk_omap_div which gets passed over the APIs. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Adam Ford <aford173@gmail.com> |
|
|
Tero Kristo
|
ece3e465b8 |
clk: ti: am43xx: drop idlest polling from gfx clock
Due to the way ti sysc and hardreset line control is now implemented, it is not possible to poll the clock status for gfx clock independent of hardreset line control. Thus, add a flag to prevent handling this status bit from clock driver. Correct sequencing of events is guaranteed by ti-sysc bus driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
1940718178 |
clk: ti: am33xx: drop idlest polling from gfx clock
Due to the way ti sysc and hardreset line control is now implemented, it is not possible to poll the clock status for gfx clock independent of hardreset line control. Thus, add a flag to prevent handling this status bit from clock driver. Correct sequencing of events is guaranteed by ti-sysc bus driver. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
4d0030bdb4 |
clk: ti: am33xx: drop idlest polling from pruss clkctrl clock
The PRUSS module on AM33xx SoCs has a hardreset line and is controlled by a PRCM reset line. Any clkctrl enable/disable operations cannot be checked for module enabled/disabled status independent of the reset operation, and this causes some unwanted timeouts in the kernel and unbalanced states for the PRUSS clocks. These details should be handled by the driver integration code itself. Add the CLKF_NO_IDLEST flag to the PRUSS clkctrl clock so that these module status checks are skipped. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
caf00b5367 |
clk: ti: am43xx: drop idlest polling from pruss clkctrl clock
The PRUSS modules on AM43xx SoCs have a hardreset line and are controlled by a PRCM reset line. Any clkctrl enable/disable operations cannot be checked for module enabled/disabled status independent of the reset operation, and this causes some unwanted timeouts in the kernel and unbalanced states for the PRUSS clocks. These details should be handled by the driver integration code itself. Add the CLKF_NO_IDLEST flag to the PRUSS clkctrl clock so that these module status checks are skipped. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Suman Anna
|
95a62bf2db |
clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks
The IPU and DSP remote processor cores and their corresponding MMUs on OMAP5 SoCs have hardreset lines associated with them and are controlled by a PRCM reset line each. Any clkctrl enable/disable operations cannot be checked for module enabled/disabled status independent of the reset operation, and this causes some unwanted timeouts in the kernel and unbalanced states for these clocks. These details should be handled by the driver integration code itself. Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so that these module status checks are skipped. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Suman Anna
|
e1799d451a |
clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks
The IPU and DSP remote processor cores and their corresponding MMUs on OMAP4 SoCs have hardreset lines associated with them and are controlled by a PRCM reset line each. Any clkctrl enable/disable operations cannot be checked for module enabled/disabled status independent of the reset operation, and this causes some unwanted timeouts in the kernel and unbalanced states for these clocks. These details should be handled by the driver integration code itself. Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so that these module status checks are skipped. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
9063ea469c |
clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks
The IPU and DSP remote processor cores and their corresponding MMUs on DRA7 SoCs have hardreset lines associated with them and are controlled by a PRCM reset line each. Any clkctrl enable/disable operations cannot be checked for module enabled/disabled status independent of the reset operation, and this causes some unwanted timeouts in the kernel and unbalanced states for these clocks. These details should be handled by the driver integration code itself. Add the CLKF_NO_IDLEST flag to both the IPU and DSP clkctrl clocks so that these module status checks are skipped. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
25999e6172 |
clk: ti: omap5: add IVA subsystem clkctrl data
Add clkctrl data for the IVA subsystem (Image and Video Accelerator.) Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
2209b72d41 |
clk: ti: clkctrl: add new exported API for checking standby info
Standby status is provided for certain clkctrl clocks to see if the given module has entered standby or not. This is mostly needed by remoteproc code to see if the remoteproc has entered standby and the clock can be turned off safely. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
22a6564f71 |
clk: ti: clkctrl: convert to use bit helper macros instead of bitops
This improves the readibility of the code slightly, and makes modifying the flags bit simpler. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Tero Kristo
|
581eb61a94 |
clk: ti: clkctrl: fix setting up clkctrl clocks
Apply the proper register function for clkctrl clocks, so they get registered under the clk_hw_omap list also. This allows checking their type runtime. Signed-off-by: Tero Kristo <t-kristo@ti.com> |
|
|
Olof Johansson
|
bcec1221c9 |
Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+ CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd ZkiGMxkpLUY= =SkMF -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Tony Lindgren
|
dd8882a255 |
clk: ti: dra7: Fix mcasp8 clock bits
There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other
macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong
way around.
Fixes:
|
|
|
Linus Torvalds
|
f97c81dc6c |
ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
that had complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the most
interesting new additions:
The new Aspeed AST2600 baseboard management controller is added, this
is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
dependencies on other device drivers.
After many years, support for the MMP2 based OLPC XO-1.75 finally makes
it into the kernel.
The Armada 3720 based Turris Mox open source router platform is a late
addition and it follows some preparatory work across multiple branches.
The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of the
now-unused platform data.
The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
+RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
EsnyNVq7wnvH12zrOv+I
=Qtkp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC late updates from Arnd Bergmann:
"This is some material that we picked up into our tree late or that had
complex inter-depondencies. The fact that there are these
interdependencies tends to meant that these are often actually the
most interesting new additions:
- The new Aspeed AST2600 baseboard management controller is added,
this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
had some dependencies on other device drivers.
- After many years, support for the MMP2 based OLPC XO-1.75 finally
makes it into the kernel.
- The Armada 3720 based Turris Mox open source router platform is a
late addition and it follows some preparatory work across multiple
branches.
- The OMAP2+ platform had some large-scale cleanup involving driver
changes and DT changes, here we finish it off, dropping a lot of
the now-unused platform data.
- The TI K3 platform that got added for 5.3 gains a lot more support
for individual bits on the SoC, this part just came late for the
merge window"
[ This pull request itself wasn't actually sent late at all by Arnd, but
I waited on the branches that it used to be pulled first, so it ends
up being merged much later than the other ARM SoC pull requests this
merge window - Linus ]
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
ARM: dts: dir685: Drop spi-cpol from the display
ARM: dts: aspeed: Add AST2600 pinmux nodes
ARM: dts: aspeed: Add AST2600 and EVB
ARM: exynos: Enable support for ARM architected timers
ARM: samsung: Fix system restart on S3C6410
ARM: dts: mmp2: add OLPC XO 1.75 machine
ARM: dts: mmp2: rename the USB PHY node
ARM: dts: mmp2: specify reg-shift for the UARTs
ARM: dts: mmp2: add camera interfaces
ARM: dts: mmp2: fix the SPI nodes
ARM: dts: mmp2: trivial whitespace fix
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
...
|
|
|
Stephen Boyd
|
91bcbc11d6 |
Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next
* clk-renesas: clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain dt-bindings: clk: emev2: Rename bindings documentation file clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper * clk-rockchip: clk: rockchip: Add clock controller for the rk3308 clk: rockchip: Add dt-binding header for rk3308 dt-bindings: Add bindings for rk3308 clock controller clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver * clk-const: clk: spear: Make structure i2s_sclk_masks constant * clk-simplify: clk/ti: Use kmemdup rather than duplicating its implementation clk: fix devm_platform_ioremap_resource.cocci warnings |
|
|
Stephen Boyd
|
a1ff1ce300 |
Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration * clk-init-destroy: clk: Overwrite clk_hw::init with NULL during clk_register() clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered clk: ti: Don't reference clk_init_data after registration clk: qcom: Remove error prints from DFS registration rtc: sun6i: Don't reference clk_init_data after registration clk: zx296718: Don't reference clk_init_data after registration clk: milbeaut: Don't reference clk_init_data after registration clk: socfpga: deindent code to proper indentation phy: ti: am654-serdes: Don't reference clk_init_data after registration clk: sprd: Don't reference clk_init_data after registration clk: socfpga: Don't reference clk_init_data after registration clk: sirf: Don't reference clk_init_data after registration clk: qcom: Don't reference clk_init_data after registration clk: meson: axg-audio: Don't reference clk_init_data after registration clk: lochnagar: Don't reference clk_init_data after registration clk: actions: Don't reference clk_init_data after registration * clk-doc: clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h clk: Document of_parse_clkspec() some more clk: Remove extraneous 'for' word in comments * clk-imx: (32 commits) clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: imx: imx8mn: fix audio pll setting clk: imx8mn: Add necessary frequency support for ARM PLL table clk: imx8mn: Add missing rate_count assignment for each PLL structure clk: imx8mn: fix int pll clk gate clk: imx8mn: Add GIC clock clk: imx8mn: Fix incorrect parents clk: imx8mm: Fix incorrect parents clk: imx8mq: Fix sys3 pll references clk: imx8mq: Unregister clks when of_clk_add_provider failed clk: imx8mm: Unregister clks when of_clk_add_provider failed clk: imx8mq: Mark AHB clock as critical clk: imx8mn: Keep uart clocks on for early console clk: imx: Remove unused function statement clk: imx7ulp: Make sure earlycon's clock is enabled clk: imx8mm: Switch to platform driver clk: imx: imx8mm: fix audio pll setting ... * clk-allwinner: clk: sunxi-ng: h6: Allow I2S to change parent rate clk: sunxi-ng: v3s: add Allwinner V3 support clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU clk: sunxi-ng: v3s: add the missing PLL_DDR1 |
|
|
Fuqian Huang
|
81b94f1477 |
clk/ti: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lkml.kernel.org/r/20190703162700.32091-1-huangfq.daxian@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Tony Lindgren
|
fd56837494 |
clk: ti: add clkctrl data omap5 sgx
Looks like we have sgx clock missing currently so let's add it. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> |
|
|
Stephen Boyd
|
e0e04fc866 |
clk: ti: Don't reference clk_init_data after registration
A future patch is going to change semantics of clk_register() so that clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid referencing this member here so that we don't run into NULL pointer exceptions. Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Lindgren <tony@atomide.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lkml.kernel.org/r/20190815221249.53235-1-sboyd@kernel.org |
|
|
Nishka Dasgupta
|
b684702f6e |
clk: ti: dm814x: Add of_node_put() to prevent memory leak
In function dm814x_adpll_early_init, variable np takes the value returned by of_find_node_by_name, which gets a node but does not put it. If np is not put before return, it may cause a memory leak. Hence put np before return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lkml.kernel.org/r/20190804163328.6693-1-nishkadg.linux@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
916f562fb2 |
This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1 -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/ tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd O2zWCGffeYs= =mK0C -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ... |
|
|
Linus Torvalds
|
556e2f6020 |
A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio
-----BEGIN PGP SIGNATURE-----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=3QYB
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is
a nonsensical value
- Fix some clk data typos in the Amlogic DT headers/code
- Avoid returning junk in the TI clk driver when an invalid clk is
looked for
- Fix dividers for the emac clks on Stratix10 SoCs
- Fix default HDA rates on Tegra210 to correct distorted audio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix divider entry for the emac clocks
clk: Do a DT parent lookup even when index < 0
clk: tegra210: Fix default rates for HDA clocks
clk: ti: clkctrl: Fix returning uninitialized data
clk: meson: meson8b: fix a typo in the VPU parent names array variable
clk: meson: fix MPLL 50M binding id typo
|
|
|
Thomas Gleixner
|
d2912cb15b |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
YueHaibing
|
da6a5dda5e |
clk: ti: Remove unused functions
They are not used any more since
commit
|
|
|
Tony Lindgren
|
41b3588dba |
clk: ti: clkctrl: Fix returning uninitialized data
If we do a clk_get() for a clock that does not exists, we have
_ti_omap4_clkctrl_xlate() return uninitialized data if no match
is found. This can be seen in some cases with SLAB_DEBUG enabled:
Unable to handle kernel paging request at virtual address 5a5a5a5a
...
clk_hw_create_clk.part.33
sysc_notifier_call
notifier_call_chain
blocking_notifier_call_chain
device_add
Let's fix this by setting a found flag only when we find a match.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes:
|
|
|
Thomas Gleixner
|
a10e763b87 |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |