Commit Graph

4146 Commits

Author SHA1 Message Date
David S. Miller 6cf1a0f856 bluetooth: Fix rfcomm_sock_ioctl() build failure with debugging enabled.
It's 'sock' not 'sk'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 00:01:53 -08:00
Marcel Holtmann 9a5df92374 Bluetooth: Fix RFCOMM release oops when device is still in use
It turns out that the following sequence of actions will reproduce the
oops:

  1. Create a new RFCOMM device (using RFCOMMCREATEDEV ioctl)
  2. (Try to) open the device
  3. Release the RFCOMM device (using RFCOMMRELEASEDEV ioctl)

At this point, the "/dev/rfcomm*" device is still in use, but it is gone
from the internal list, so the device id can be reused.

  4. Create a new RFCOMM device with the same device id as before

And now kobject will complain that the TTY already exists.

(See http://lkml.org/lkml/2008/7/13/89 for a reproducible test-case.)

This patch attempts to correct this by only removing the device from the
internal list of devices at the final unregister stage, so that the id
won't get reused until the device has been completely destructed.

This should be safe as the RFCOMM_TTY_RELEASED bit will be set for the
device and prevent the device from being reopened after it has been
released.

Based on a report from Vegard Nossum <vegard.nossum@gmail.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:29 +01:00
Marcel Holtmann 2e792995e4 Bluetooth: Fix format arguments warning
Newer GCC versions are a little bit picky about how to deal with format
arguments:

net/bluetooth/hci_sysfs.c: In function ‘hci_register_sysfs’:
net/bluetooth/hci_sysfs.c:418: warning: format not a string literal and no format arguments

It is simple enough to fix and makes the compiler happy.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:29 +01:00
Marcel Holtmann a418b893a6 Bluetooth: Enable per-module dynamic debug messages
With the introduction of CONFIG_DYNAMIC_PRINTK_DEBUG it is possible to
allow debugging without having to recompile the kernel. This patch turns
all BT_DBG() calls into pr_debug() to support dynamic debug messages.

As a side effect all CONFIG_BT_*_DEBUG statements are now removed and
some broken debug entries have been fixed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:28 +01:00
Marcel Holtmann 7a9d402053 Bluetooth: Send HCI Reset command by default on device initialization
The Bluetooth subsystem was not using the HCI Reset command when doing
device initialization. The Bluetooth 1.0b specification was ambiguous
on how the device firmware was suppose to handle it. Almost every device
was triggering a transport reset at the same time. In case of USB this
ended up in disconnects from the bus.

All modern Bluetooth dongles handle this perfectly fine and a lot of
them actually require that HCI Reset is sent. If not then they are
either stuck in their HID Proxy mode or their internal structures for
inquiry and paging are not correctly setup.

To handle old and new devices smoothly the Bluetooth subsystem contains
a quirk to force the HCI Reset on initialization. However maintaining
such a quirk becomes more and more complicated. This patch turns the
logic around and lets the old devices disable the HCI Reset command.

The only device where the HCI_QUIRK_NO_RESET is still needed are the
original Digianswer devices and dongles with an early CSR firmware.

CSR reported that they fixed this for version 12 firmware. The last
official release of version 11 firmware is build ID 115. The first
version 12 candidate was build ID 117.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:26 +01:00
Marcel Holtmann db7aa1c203 Bluetooth: Fix warnings for bt_key_strings and bt_slock_key_strings
After adding proper lockdep annotations for Bluetooth protocols the case
when lockdep is disabled produced two compiler warnings:

net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used
net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used

Fix both of them by adding a CONFIG_DEBUG_LOCK_ALLOC conditional around
them and re-arranging the code a little bit.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:19 +01:00
Vegard Nossum c6bf514c6e Bluetooth: Fix leak of uninitialized data to userspace
struct hci_dev_list_req {
            __u16  dev_num;
            struct hci_dev_req dev_req[0];  /* hci_dev_req structures */
    };

sizeof(struct hci_dev_list_req) == 4, so the two bytes immediately
following "dev_num" will never be initialized. When this structure
is copied to userspace, these uninitialized bytes are leaked.

Fix by using kzalloc() instead of kmalloc(). Found using kmemcheck.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-11-30 12:17:19 +01:00
Ingo Molnar 45555c0ed4 bluetooth: fix warning in net/bluetooth/rfcomm/sock.c
fix this warning:

  net/bluetooth/rfcomm/sock.c: In function ‘rfcomm_sock_ioctl’:
  net/bluetooth/rfcomm/sock.c:795: warning: unused variable ‘sk’

perhaps BT_DEBUG() should be improved to do printf format checking
instead of the #ifdef, but that looks quite intrusive: each bluetooth
.c file undefines the macro.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 16:59:21 -08:00
Wang Chen 524ad0a791 netdevice: safe convert to netdev_priv() #part-4
We have some reasons to kill netdev->priv:
1. netdev->priv is equal to netdev_priv().
2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
   netdev_priv() is more flexible than netdev->priv.
But we cann't kill netdev->priv, because so many drivers reference to it
directly.

This patch is a safe convert for netdev->priv to netdev_priv(netdev).
Since all of the netdev->priv is only for read.
But it is too big to be sent in one mail.
I split it to 4 parts and make every part smaller than 100,000 bytes,
which is max size allowed by vger.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 23:39:10 -08:00
Kay Sievers fb28ad3590 net: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 13:55:14 -08:00
David S. Miller d2ad3ca88d net/: Kill now superfluous ->last_rx stores.
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 22:01:07 -08:00
Linus Torvalds b225ee5bed Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
  ipv4: Add a missing rcu_assign_pointer() in routing cache.
  [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit
  xen-netfront: Avoid unaligned accesses to IP header
  lmc: copy_*_user under spinlock
  [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
2008-10-17 08:58:52 -07:00
Johannes Berg 95a5afca4a net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely)
Some code here depends on CONFIG_KMOD to not try to load
protocol modules or similar, replace by CONFIG_MODULES
where more than just request_module depends on CONFIG_KMOD
and and also use try_then_request_module in ebtables.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16 15:24:51 -07:00
Jiri Slaby 93c10132a7 HID: move connect quirks
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00
Jiri Slaby 8c19a51591 HID: move apple quirks
Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby d458a9dfc4 HID: move ignore quirks
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby c500c97140 HID: hid, make parsing event driven
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
  to allow hooks/fixes between them

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Jiri Slaby 85cdaf524b HID: make a bus from hid code
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.

It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.

Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Marcel Holtmann 7c6a329e44 [Bluetooth] Fix regression from using default link policy
To speed up the Simple Pairing connection setup, the support for the
default link policy has been enabled. This is in contrast to settings
the link policy on every connection setup. Using the default link policy
is the preferred way since there is no need to dynamically change it for
every connection.

For backward compatibility reason and to support old userspace the
HCISETLINKPOL ioctl has been switched over to using hci_request() to
issue the HCI command for setting the default link policy instead of
just storing it in the HCI device structure.

However the hci_request() can only be issued when the device is
brought up. If used on a device that is registered, but still down
it will timeout and fail. This is problematic since the command is
put on the TX queue and the Bluetooth core tries to submit it to
hardware that is not ready yet. The timeout for these requests is
10 seconds and this causes a significant regression when setting up
a new device.

The userspace can perfectly handle a failure of the HCISETLINKPOL
ioctl and will re-submit it later, but the 10 seconds delay causes
a problem. So in case hci_request() is called on a device that is
still down, just fail it with ENETDOWN to indicate what happens.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-12 03:11:54 +02:00
Marcel Holtmann e7c29cb16c [Bluetooth] Reject L2CAP connections on an insecure ACL link
The Security Mode 4 of the Bluetooth 2.1 specification has strict
authentication and encryption requirements. It is the initiators job
to create a secure ACL link. However in case of malicious devices, the
acceptor has to make sure that the ACL is encrypted before allowing
any kind of L2CAP connection. The only exception here is the PSM 1 for
the service discovery protocol, because that is allowed to run on an
insecure ACL link.

Previously it was enough to reject a L2CAP connection during the
connection setup phase, but with Bluetooth 2.1 it is forbidden to
do any L2CAP protocol exchange on an insecure link (except SDP).

The new hci_conn_check_link_mode() function can be used to check the
integrity of an ACL link. This functions also takes care of the cases
where Security Mode 4 is disabled or one of the devices is based on
an older specification.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann 09ab6f4c23 [Bluetooth] Enforce correct authentication requirements
With the introduction of Security Mode 4 and Simple Pairing from the
Bluetooth 2.1 specification it became mandatory that the initiator
requires authentication and encryption before any L2CAP channel can
be established. The only exception here is PSM 1 for the service
discovery protocol (SDP). It is meant to be used without any encryption
since it contains only public information. This is how Bluetooth 2.0
and before handle connections on PSM 1.

For Bluetooth 2.1 devices the pairing procedure differentiates between
no bonding, general bonding and dedicated bonding. The L2CAP layer
wrongly uses always general bonding when creating new connections, but it
should not do this for SDP connections. In this case the authentication
requirement should be no bonding and the just-works model should be used,
but in case of non-SDP connection it is required to use general bonding.

If the new connection requires man-in-the-middle (MITM) protection, it
also first wrongly creates an unauthenticated link key and then later on
requests an upgrade to an authenticated link key to provide full MITM
protection. With Simple Pairing the link key generation is an expensive
operation (compared to Bluetooth 2.0 and before) and doing this twice
during a connection setup causes a noticeable delay when establishing
a new connection. This should be avoided to not regress from the expected
Bluetooth 2.0 connection times. The authentication requirements are known
up-front and so enforce them.

To fulfill these requirements the hci_connect() function has been extended
with an authentication requirement parameter that will be stored inside
the connection information and can be retrieved by userspace at any
time. This allows the correct IO capabilities exchange and results in
the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:20 +02:00
Marcel Holtmann f1c08ca559 [Bluetooth] Fix reference counting during ACL config stage
The ACL config stage keeps holding a reference count on incoming
connections when requesting the extended features. This results in
keeping an ACL link up without any users. The problem here is that
the Bluetooth specification doesn't define an ownership of the ACL
link and thus it can happen that the implementation on the initiator
side doesn't care about disconnecting unused links. In this case the
acceptor needs to take care of this.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 07:19:19 +02:00
Marcel Holtmann 63fbd24e51 [Bluetooth] Consolidate maintainers information
The Bluetooth entries for the MAINTAINERS file are a little bit too
much. Consolidate them into two entries. One for Bluetooth drivers and
another one for the Bluetooth subsystem.

Also the MODULE_AUTHOR should indicate the current maintainer of the
module and actually not the original author. Fix all Bluetooth modules
to provide current maintainer information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18 13:23:53 +02:00
Marcel Holtmann 90855d7b72 [Bluetooth] Fix userspace breakage due missing class links
The Bluetooth adapters and connections are best presented via a class
in sysfs. The removal of the links inside the Bluetooth class broke
assumptions by userspace programs on how to find attached adapters.

This patch creates adapters and connections as part of the Bluetooth
class, but it uses different device types to distinguish them. The
userspace programs can now easily navigate in the sysfs device tree.

The unused platform device and bus have been removed to keep the
code simple and clean.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-18 13:23:53 +02:00
Marcel Holtmann 28111eb2f5 [Bluetooth] Add parameters to control BNEP header compression
The Bluetooth qualification for PAN demands testing with BNEP header
compression disabled. This is actually pretty stupid and the Linux
implementation outsmarts the test system since it compresses whenever
possible. So to pass qualification two need parameters have been added
to control the compression of source and destination headers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-08-07 22:26:54 +02:00
Greg Kroah-Hartman 16be63fd16 bluetooth: remove improper bluetooth class symlinks.
Don't create symlinks in a class to a device that is not owned by the
class.  If the bluetooth subsystem really wants to point to all of the
devices it controls, it needs to create real devices, not fake symlinks.

Cc: Maxim Krasnyansky <maxk@qualcomm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:51 -07:00
Linus Torvalds db6d8c7a40 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...
2008-07-20 17:43:29 -07:00
Alan Cox a352def21a tty: Ldisc revamp
Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:34 -07:00
David S. Miller 407d819cf0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6 2008-07-19 00:30:39 -07:00
Marcel Holtmann b1235d7961 [Bluetooth] Allow security for outgoing L2CAP connections
When requested the L2CAP layer will now enforce authentication and
encryption on outgoing connections. The usefulness of this feature
is kinda limited since it will not allow proper connection ownership
tracking until the authentication procedure has been finished. This
is a limitation of Bluetooth 2.0 and before and can only be fixed by
using Simple Pairing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:54 +02:00
Marcel Holtmann 7cb127d5b0 [Bluetooth] Add option to disable eSCO connection creation
It has been reported that some eSCO capable headsets are not able to
connect properly. The real reason for this is unclear at the moment. So
for easier testing add a module parameter to disable eSCO connection
creation.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:53 +02:00
Marcel Holtmann ec8dab36e0 [Bluetooth] Signal user-space for HIDP and BNEP socket errors
When using the HIDP or BNEP kernel support, the user-space needs to
know if the connection has been terminated for some reasons. Wake up
the application if that happens. Otherwise kernel and user-space are
no longer on the same page and weird behaviors can happen.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:53 +02:00
Marcel Holtmann a0c22f2265 [Bluetooth] Move pending packets from RFCOMM socket to TTY
When an incoming RFCOMM socket connection gets converted into a TTY,
it can happen that packets are lost. This mainly happens with the
Handsfree profile where the remote side starts sending data right
away. The problem is that these packets are in the socket receive
queue. So when creating the TTY make sure to copy all pending packets
from the socket receive queue to a private queue inside the TTY.

To make this actually work, the flow control on the newly created TTY
will be disabled and only enabled again when the TTY is opened by an
application. And right before that, the pending packets will be put
into the TTY flip buffer.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann 8b6b3da765 [Bluetooth] Store remote modem status for RFCOMM TTY
When switching a RFCOMM socket to a TTY, the remote modem status might
be needed later. Currently it is lost since the original configuration
is done via the socket interface. So store the modem status and reply
it when the socket has been converted to a TTY.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann ca37bdd53b [Bluetooth] Use non-canonical TTY by default for RFCOMM
While the RFCOMM TTY emulation can act like a real serial port, in
reality it is not used like this. So to not mess up stupid applications,
use the non-canonical mode by default.

Signed-off-by: Denis Kenzior <denis.kenzior@trolltech.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:52 +02:00
Marcel Holtmann 78c6a1744f [Bluetooth] Update Bluetooth core version number
With all the Bluetooth 2.1 changes and the support for Simple Pairing,
it is important to update the Bluetooth core version number.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann 7d0db0a373 [Bluetooth] Use a more unique bus name for connections
When attaching Bluetooth low-level connections to the bus, the bus name
is constructed from the remote address since at that time the connection
handle is not assigned yet. This has worked so far, but also caused a
lot of troubles. It is better to postpone the creation of the sysfs
entry to the time when the connection actually has been established
and then use its connection handle as unique identifier.

This also fixes the case where two different adapters try to connect
to the same remote device.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann 43cbeee9f9 [Bluetooth] Add support for TIOCOUTQ and TIOCINQ ioctls
Almost every protocol family supports the TIOCOUTQ and TIOCINQ ioctls
and even Bluetooth could make use of them. When implementing audio
streaming and integration with GStreamer or PulseAudio they will allow
a better timing and synchronization.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:51 +02:00
Marcel Holtmann 3241ad820d [Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO
Enable the common timestamp functionality that the network subsystem
provides for L2CAP, RFCOMM and SCO sockets. It is possible to either
use SO_TIMESTAMP or the IOCTLs to retrieve the timestamp of the
current packet.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann 40be492fe4 [Bluetooth] Export details about authentication requirements
With the Simple Pairing support, the authentication requirements are
an explicit setting during the bonding process. Track and enforce the
requirements and allow higher layers like L2CAP and RFCOMM to increase
them if needed.

This patch introduces a new IOCTL that allows to query the current
authentication requirements. It is also possible to detect Simple
Pairing support in the kernel this way.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:50 +02:00
Marcel Holtmann f8558555f3 [Bluetooth] Initiate authentication during connection establishment
With Bluetooth 2.1 and Simple Pairing the requirement is that any new
connection needs to be authenticated and that encryption has been
switched on before allowing L2CAP to use it. So make sure that all
the requirements are fulfilled and otherwise drop the connection with
a minimal disconnect timeout of 10 milliseconds.

This change only affects Bluetooth 2.1 devices and Simple Pairing
needs to be enabled locally and in the remote host stack. The previous
changes made sure that these information are discovered before any
kind of authentication and encryption is triggered.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann 769be974d0 [Bluetooth] Use ACL config stage to retrieve remote features
The Bluetooth technology introduces new features on a regular basis
and for some of them it is important that the hardware on both sides
support them. For features like Simple Pairing it is important that
the host stacks on both sides have switched this feature on. To make
valid decisions, a config stage during ACL link establishment has been
introduced that retrieves remote features and if needed also the remote
extended features (known as remote host features) before signalling
this link as connected.

This change introduces full reference counting of incoming and outgoing
ACL links and the Bluetooth core will disconnect both if no owner of it
is present. To better handle interoperability during the pairing phase
the disconnect timeout for incoming connections has been increased to
10 seconds. This is five times more than for outgoing connections.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann a8bd28baf2 [Bluetooth] Export remote Simple Pairing mode via sysfs
Since the remote Simple Pairing mode is stored together with the
inquiry cache, it makes sense to show it together with the other
information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:49 +02:00
Marcel Holtmann 41a96212b3 [Bluetooth] Track status of remote Simple Pairing mode
The Simple Pairing process can only be used if both sides have the
support enabled in the host stack. The current Bluetooth specification
has three ways to detect this support.

If an Extended Inquiry Result has been sent during inquiry then it
is safe to assume that Simple Pairing is enabled. It is not allowed
to enable Extended Inquiry without Simple Pairing. During the remote
name request phase a notification with the remote host supported
features will be sent to indicate Simple Pairing support. Also the
second page of the remote extended features can indicate support for
Simple Pairing.

For all three cases the value of remote Simple Pairing mode is stored
in the inquiry cache for later use.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:48 +02:00
Marcel Holtmann 333140b57f [Bluetooth] Track status of Simple Pairing mode
The Simple Pairing feature is optional and needs to be enabled by the
host stack first. The Linux kernel relies on the Bluetooth daemon to
either enable or disable it, but at any time it needs to know the
current state of the Simple Pairing mode. So track any changes made
by external entities and store the current mode in the HCI device
structure.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:48 +02:00
Marcel Holtmann 0493684ed2 [Bluetooth] Disable disconnect timer during Simple Pairing
During the Simple Pairing process the HCI disconnect timer must be
disabled. The way to do this is by holding a reference count of the
HCI connection. The Simple Pairing process on both sides starts with
an IO Capabilities Request and ends with Simple Pairing Complete.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:48 +02:00
Marcel Holtmann c7bdd5026d [Bluetooth] Update class of device value whenever possible
The class of device value can only be retrieved via inquiry or during
an incoming connection request. Outgoing connections can't ask for the
class of device. To compensate for this the value is stored and copied
via the inquiry cache, but currently only updated via inquiry. This
update should also happen during an incoming connection request.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:47 +02:00
Marcel Holtmann f383f2750a [Bluetooth] Some cleanups for HCI event handling
Some minor cosmetic cleanups to the HCI event handling to make the
code easier to read and understand.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:47 +02:00
Marcel Holtmann e4e8e37c42 [Bluetooth] Make use of the default link policy settings
The Bluetooth specification supports the default link policy settings
on a per host controller basis. For every new connection the link
manager would then use these settings. It is better to use this instead
of bothering the controller on every connection setup to overwrite the
default settings.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:47 +02:00
Marcel Holtmann a8746417e8 [Bluetooth] Track connection packet type changes
The connection packet type can be changed after the connection has been
established and thus needs to be properly tracked to ensure that the
host stack has always correct and valid information about it.

On incoming connections the Bluetooth core switches the supported packet
types to the configured list for this controller. However the usefulness
of this feature has been questioned a lot. The general consent is that
every Bluetooth host stack should enable as many packet types as the
hardware actually supports and leave the decision to the link manager
software running on the Bluetooth chip.

When running on Bluetooth 2.0 or later hardware, don't change the packet
type for incoming connections anymore. This hardware likely supports
Enhanced Data Rate and thus leave it completely up to the link manager
to pick the best packet type.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:46 +02:00
Marcel Holtmann 9dc0a3afc0 [Bluetooth] Support the case when headset falls back to SCO link
When trying to establish an eSCO link between two devices then it can
happen that the remote device falls back to a SCO link. Currently this
case is not handled correctly and the message dispatching will break
since it is looking for eSCO packets. So in case the configured link
falls back to SCO overwrite the link type with the correct value.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:46 +02:00
Marcel Holtmann ae29319649 [Bluetooth] Update authentication status after successful encryption
The authentication status is not communicated to both parties. This is
actually a flaw in the Bluetooth specification. Only the requesting side
really knows if the authentication was successful or not. This piece of
information is however needed on the other side to know if it has to
trigger the authentication procedure or not. Worst case is that both
sides will request authentication at different times, but this should
be avoided since it costs extra time when setting up a new connection.

For Bluetooth encryption it is required to authenticate the link first
and the encryption status is communicated to both sides. So when a link
is switched to encryption it is possible to update the authentication
status since it implies an authenticated link.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:45 +02:00
Marcel Holtmann 9719f8afce [Bluetooth] Disconnect when encryption gets disabled
The Bluetooth specification allows to enable or disable the encryption
of an ACL link at any time by either the peer or the remote device. If
a L2CAP or RFCOMM connection requested an encrypted link, they will now
disconnect that link if the encryption gets disabled. Higher protocols
that don't care about encryption (like SDP) are not affected.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:45 +02:00
Marcel Holtmann 77db198056 [Bluetooth] Enforce security for outgoing RFCOMM connections
Recent tests with various Bluetooth headsets have shown that some of
them don't enforce authentication and encryption when connecting. All
of them leave it up to the host stack to enforce it. Non of them should
allow unencrypted connections, but that is how it is. So in case the
link mode settings require authentication and/or encryption it will now
also be enforced on outgoing RFCOMM connections. Previously this was
only done for incoming connections.

This support has a small drawback from a protocol level point of view
since the host stack can't really tell with 100% certainty if a remote
side is already authenticated or not. So if both sides are configured
to enforce authentication it will be requested twice. Most Bluetooth
chips are caching this information and thus no extra authentication
procedure has to be triggered over-the-air, but it can happen.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:45 +02:00
Marcel Holtmann 79d554a697 [Bluetooth] Change retrieval of L2CAP features mask
Getting the remote L2CAP features mask is really important, but doing
this as less intrusive as possible is tricky. To play nice with older
systems and Bluetooth qualification testing, the features mask is now
only retrieved in two specific cases and only once per lifetime of an
ACL link.

When trying to establish a L2CAP connection and the remote features mask
is unknown, the L2CAP information request is sent when the ACL link goes
into connected state. This applies only to outgoing connections and also
only for the connection oriented channels.

The second case is when a connection request has been received. In this
case a connection response with the result pending and the information
request will be send. After receiving an information response or if the
timeout gets triggered, the normal connection setup process with security
setup will be initiated.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-14 20:13:44 +02:00
Adrian Bunk 0b04082995 net: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11 21:00:38 -07:00
Dave Young 537d59af73 bluetooth: rfcomm_dev_state_change deadlock fix
There's logic in __rfcomm_dlc_close:
	rfcomm_dlc_lock(d);
	d->state = BT_CLOSED;
	d->state_changed(d, err);
	rfcomm_dlc_unlock(d);

In rfcomm_dev_state_change, it's possible that rfcomm_dev_put try to
take the dlc lock, then we will deadlock.

Here fixed it by unlock dlc before rfcomm_dev_get in
rfcomm_dev_state_change.

why not unlock just before rfcomm_dev_put? it's because there's
another problem.  rfcomm_dev_get/rfcomm_dev_del will take
rfcomm_dev_lock, but in rfcomm_dev_add the lock order is :
rfcomm_dev_lock --> dlc lock

so I unlock dlc before the taken of rfcomm_dev_lock.

Actually it's a regression caused by commit
1905f6c736 ("bluetooth :
__rfcomm_dlc_close lock fix"), the dlc state_change could be two
callbacks : rfcomm_sk_state_change and rfcomm_dev_state_change. I
missed the rfcomm_sk_state_change that time.

Thanks Arjan van de Ven <arjan@linux.intel.com> for the effort in
commit 4c8411f8c1 ("bluetooth: fix
locking bug in the rfcomm socket cleanup handling") but he missed the
rfcomm_dev_state_change lock issue.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-03 14:27:17 -07:00
Arjan van de Ven 4c8411f8c1 bluetooth: fix locking bug in the rfcomm socket cleanup handling
in net/bluetooth/rfcomm/sock.c, rfcomm_sk_state_change() does the
following operation:

        if (parent && sock_flag(sk, SOCK_ZAPPED)) {
                /* We have to drop DLC lock here, otherwise
                 * rfcomm_sock_destruct() will dead lock. */
                rfcomm_dlc_unlock(d);
                rfcomm_sock_kill(sk);
                rfcomm_dlc_lock(d);
        }
}

which is fine, since rfcomm_sock_kill() will call sk_free() which will call
rfcomm_sock_destruct() which takes the rfcomm_dlc_lock()... so far so good.

HOWEVER, this assumes that the rfcomm_sk_state_change() function always gets
called with the rfcomm_dlc_lock() taken. This is the case for all but one
case, and in that case where we don't have the lock, we do a double unlock
followed by an attempt to take the lock, which due to underflow isn't
going anywhere fast.

This patch fixes this by moving the stragling case inside the lock, like
the other usages of the same call are doing in this code.

This was found with the help of the www.kerneloops.org project, where this
deadlock was observed 51 times at this point in time:
http://www.kerneloops.org/search.php?search=rfcomm_sock_destruct

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-29 01:32:47 -07:00
Harvey Harrison 8398531939 bluetooth: use get/put_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 16:25:46 -07:00
David S. Miller e1ec1b8ccd Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/s2io.c
2008-04-02 22:35:23 -07:00
Dave Young 1905f6c736 bluetooth : __rfcomm_dlc_close lock fix
Lockdep warning will be trigged while rfcomm connection closing.

The locks taken in rfcomm_dev_add:
rfcomm_dev_lock --> d->lock

In __rfcomm_dlc_close:
d->lock --> rfcomm_dev_lock (in rfcomm_dev_state_change)

There's two way to fix it, one is in rfcomm_dev_add we first locking
d->lock then the rfcomm_dev_lock

The other (in this patch), remove the locking of d->lock for
rfcomm_dev_state_change because just locking "d->state = BT_CLOSED;"
is enough.

[  295.002046] =======================================================
[  295.002046] [ INFO: possible circular locking dependency detected ]
[  295.002046] 2.6.25-rc7 #1
[  295.002046] -------------------------------------------------------
[  295.002046] krfcommd/2705 is trying to acquire lock:
[  295.002046]  (rfcomm_dev_lock){-.--}, at: [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm]
[  295.002046] 
[  295.002046] but task is already holding lock:
[  295.002046]  (&d->lock){--..}, at: [<f899c533>] __rfcomm_dlc_close+0x43/0xd0 [rfcomm]
[  295.002046] 
[  295.002046] which lock already depends on the new lock.
[  295.002046] 
[  295.002046] 
[  295.002046] the existing dependency chain (in reverse order) is:
[  295.002046] 
[  295.002046] -> #1 (&d->lock){--..}:
[  295.002046]        [<c0149b23>] check_prev_add+0xd3/0x200
[  295.002046]        [<c0149ce5>] check_prevs_add+0x95/0xe0
[  295.002046]        [<c0149f6f>] validate_chain+0x23f/0x320
[  295.002046]        [<c014b7b1>] __lock_acquire+0x1c1/0x760
[  295.002046]        [<c014c349>] lock_acquire+0x79/0xb0
[  295.002046]        [<c03d6b99>] _spin_lock+0x39/0x80
[  295.002046]        [<f89a01c0>] rfcomm_dev_add+0x240/0x360 [rfcomm]
[  295.002046]        [<f89a047e>] rfcomm_create_dev+0x6e/0xe0 [rfcomm]
[  295.002046]        [<f89a0823>] rfcomm_dev_ioctl+0x33/0x60 [rfcomm]
[  295.002046]        [<f899facc>] rfcomm_sock_ioctl+0x2c/0x50 [rfcomm]
[  295.002046]        [<c0363d38>] sock_ioctl+0x118/0x240
[  295.002046]        [<c0194196>] vfs_ioctl+0x76/0x90
[  295.002046]        [<c0194446>] do_vfs_ioctl+0x56/0x140
[  295.002046]        [<c0194569>] sys_ioctl+0x39/0x60
[  295.002046]        [<c0104faa>] syscall_call+0x7/0xb
[  295.002046]        [<ffffffff>] 0xffffffff
[  295.002046] 
[  295.002046] -> #0 (rfcomm_dev_lock){-.--}:
[  295.002046]        [<c0149a84>] check_prev_add+0x34/0x200
[  295.002046]        [<c0149ce5>] check_prevs_add+0x95/0xe0
[  295.002046]        [<c0149f6f>] validate_chain+0x23f/0x320
[  295.002046]        [<c014b7b1>] __lock_acquire+0x1c1/0x760
[  295.002046]        [<c014c349>] lock_acquire+0x79/0xb0
[  295.002046]        [<c03d6639>] _read_lock+0x39/0x80
[  295.002046]        [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm]
[  295.002046]        [<f899c548>] __rfcomm_dlc_close+0x58/0xd0 [rfcomm]
[  295.002046]        [<f899d44f>] rfcomm_recv_ua+0x6f/0x120 [rfcomm]
[  295.002046]        [<f899e061>] rfcomm_recv_frame+0x171/0x1e0 [rfcomm]
[  295.002046]        [<f899e357>] rfcomm_run+0xe7/0x550 [rfcomm]
[  295.002046]        [<c013c18c>] kthread+0x5c/0xa0
[  295.002046]        [<c0105c07>] kernel_thread_helper+0x7/0x10
[  295.002046]        [<ffffffff>] 0xffffffff
[  295.002046] 
[  295.002046] other info that might help us debug this:
[  295.002046] 
[  295.002046] 2 locks held by krfcommd/2705:
[  295.002046]  #0:  (rfcomm_mutex){--..}, at: [<f899e2eb>] rfcomm_run+0x7b/0x550 [rfcomm]
[  295.002046]  #1:  (&d->lock){--..}, at: [<f899c533>] __rfcomm_dlc_close+0x43/0xd0 [rfcomm]
[  295.002046] 
[  295.002046] stack backtrace:
[  295.002046] Pid: 2705, comm: krfcommd Not tainted 2.6.25-rc7 #1
[  295.002046]  [<c0128a38>] ? printk+0x18/0x20
[  295.002046]  [<c014927f>] print_circular_bug_tail+0x6f/0x80
[  295.002046]  [<c0149a84>] check_prev_add+0x34/0x200
[  295.002046]  [<c0149ce5>] check_prevs_add+0x95/0xe0
[  295.002046]  [<c0149f6f>] validate_chain+0x23f/0x320
[  295.002046]  [<c014b7b1>] __lock_acquire+0x1c1/0x760
[  295.002046]  [<c014c349>] lock_acquire+0x79/0xb0
[  295.002046]  [<f89a090a>] ? rfcomm_dev_state_change+0x6a/0xd0 [rfcomm]
[  295.002046]  [<c03d6639>] _read_lock+0x39/0x80
[  295.002046]  [<f89a090a>] ? rfcomm_dev_state_change+0x6a/0xd0 [rfcomm]
[  295.002046]  [<f89a090a>] rfcomm_dev_state_change+0x6a/0xd0 [rfcomm]
[  295.002046]  [<f899c548>] __rfcomm_dlc_close+0x58/0xd0 [rfcomm]
[  295.002046]  [<f899d44f>] rfcomm_recv_ua+0x6f/0x120 [rfcomm]
[  295.002046]  [<f899e061>] rfcomm_recv_frame+0x171/0x1e0 [rfcomm]
[  295.002046]  [<c014abd9>] ? trace_hardirqs_on+0xb9/0x130
[  295.002046]  [<c03d6e89>] ? _spin_unlock_irqrestore+0x39/0x70
[  295.002046]  [<f899e357>] rfcomm_run+0xe7/0x550 [rfcomm]
[  295.002046]  [<c03d4559>] ? __sched_text_start+0x229/0x4c0
[  295.002046]  [<c0120000>] ? cpu_avg_load_per_task+0x20/0x30
[  295.002046]  [<f899e270>] ? rfcomm_run+0x0/0x550 [rfcomm]
[  295.002046]  [<c013c18c>] kthread+0x5c/0xa0
[  295.002046]  [<c013c130>] ? kthread+0x0/0xa0
[  295.002046]  [<c0105c07>] kernel_thread_helper+0x7/0x10
[  295.002046]  =======================

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01 23:59:06 -07:00
Dave Young 68845cb2c8 bluetooth : use lockdep sub-classes for diffrent bluetooth protocol
'rfcomm connect' will trigger lockdep warnings which is caused by
locking diffrent kinds of bluetooth sockets at the same time.

So using sub-classes per AF_BLUETOOTH sub-type for lockdep.

Thanks for the hints from dave jones.

---
> From: Dave Jones <davej@codemonkey.org.uk>
> Date: Thu, 27 Mar 2008 12:21:56 -0400
>
> > Mar 27 08:10:57 localhost kernel: Pid: 3611, comm: obex-data-serve Not tainted 2.6.25-0.121.rc5.git4.fc9 #1
> > Mar 27 08:10:57 localhost kernel:  [__lock_acquire+2287/3089] __lock_acquire+0x8ef/0xc11
> > Mar 27 08:10:57 localhost kernel:  [sched_clock+8/11] ? sched_clock+0x8/0xb
> > Mar 27 08:10:57 localhost kernel:  [lock_acquire+106/144] lock_acquire+0x6a/0x90
> > Mar 27 08:10:57 localhost kernel:  [<f8bd9321>] ? l2cap_sock_bind+0x29/0x108 [l2cap]
> > Mar 27 08:10:57 localhost kernel:  [lock_sock_nested+182/198] lock_sock_nested+0xb6/0xc6
> > Mar 27 08:10:57 localhost kernel:  [<f8bd9321>] ? l2cap_sock_bind+0x29/0x108 [l2cap]
> > Mar 27 08:10:57 localhost kernel:  [security_socket_post_create+22/27] ? security_socket_post_create+0x16/0x1b
> > Mar 27 08:10:57 localhost kernel:  [__sock_create+388/472] ? __sock_create+0x184/0x1d8
> > Mar 27 08:10:57 localhost kernel:  [<f8bd9321>] l2cap_sock_bind+0x29/0x108 [l2cap]
> > Mar 27 08:10:57 localhost kernel:  [kernel_bind+10/13] kernel_bind+0xa/0xd
> > Mar 27 08:10:57 localhost kernel:  [<f8dad3d7>] rfcomm_dlc_open+0xc8/0x294 [rfcomm]
> > Mar 27 08:10:57 localhost kernel:  [lock_sock_nested+187/198] ? lock_sock_nested+0xbb/0xc6
> > Mar 27 08:10:57 localhost kernel:  [<f8dae18c>] rfcomm_sock_connect+0x8b/0xc2 [rfcomm]
> > Mar 27 08:10:57 localhost kernel:  [sys_connect+96/125] sys_connect+0x60/0x7d
> > Mar 27 08:10:57 localhost kernel:  [__lock_acquire+1370/3089] ? __lock_acquire+0x55a/0xc11
> > Mar 27 08:10:57 localhost kernel:  [sys_socketcall+140/392] sys_socketcall+0x8c/0x188
> > Mar 27 08:10:57 localhost kernel:  [syscall_call+7/11] syscall_call+0x7/0xb
---

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01 23:58:35 -07:00
Robert P. J. Day d5fb2962c6 bluetooth: replace deprecated RW_LOCK_UNLOCKED macros
The older RW_LOCK_UNLOCKED macros defeat lockdep state tracing so
replace them with the newer __RW_LOCK_UNLOCKED macros.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-28 16:17:38 -07:00
YOSHIFUJI Hideaki 3b1e0a655f [NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.
Introduce per-sock inlines: sock_net(), sock_net_set()
and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:55 +09:00
Tobias Klauser a4e2acf01a bluetooth: make bnep_sock_cleanup() return void
bnep_sock_cleanup() always returns 0 and its return value isn't used
anywhere in the code.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-05 18:47:40 -08:00
Tobias Klauser 04005dd9ae bluetooth: Make hci_sock_cleanup() return void
hci_sock_cleanup() always returns 0 and its return value isn't used
anywhere in the code.

Compile-tested with 'make allyesconfig && make net/bluetooth/bluetooth.ko'

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2008-03-05 18:47:03 -08:00
Dave Young 147e2d5983 bluetooth: hci_core: defer hci_unregister_sysfs()
Alon Bar-Lev reports:

 Feb 16 23:41:33 alon1 usb 3-1: configuration #1 chosen from 1 choice
Feb 16 23:41:33 alon1 BUG: unable to handle kernel NULL pointer  
dereference at virtual address 00000008
Feb 16 23:41:33 alon1 printing eip: c01b2db6 *pde = 00000000
Feb 16 23:41:33 alon1 Oops: 0000 [#1] PREEMPT
Feb 16 23:41:33 alon1 Modules linked in: ppp_deflate zlib_deflate  
zlib_inflate bsd_comp ppp_async rfcomm l2cap hci_usb vmnet(P)  
vmmon(P) tun radeon drm autofs4 ipv6 aes_generic crypto_algapi  
ieee80211_crypt_ccmp nf_nat_irc nf_nat_ftp nf_conntrack_irc  
nf_conntrack_ftp ipt_MASQUERADE iptable_nat nf_nat ipt_REJECT  
xt_tcpudp ipt_LOG xt_limit xt_state nf_conntrack_ipv4 nf_conntrack  
iptable_filter ip_tables x_tables snd_pcm_oss snd_mixer_oss  
snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device  
bluetooth ppp_generic slhc ioatdma dca cfq_iosched cpufreq_powersave  
cpufreq_ondemand cpufreq_conservative acpi_cpufreq freq_table uinput  
fan af_packet nls_cp1255 nls_iso8859_1 nls_utf8 nls_base pcmcia  
snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm nsc_ircc snd_timer  
ipw2200 thinkpad_acpi irda snd ehci_hcd yenta_socket uhci_hcd  
psmouse ieee80211 soundcore intel_agp hwmon rsrc_nonstatic pcspkr  
e1000 crc_ccitt snd_page_alloc i2c_i801 ieee80211_crypt pcmcia_core  
agpgart thermal bat!
tery nvram rtc sr_mod ac sg firmware_class button processor cdrom  
unix usbcore evdev ext3 jbd ext2 mbcache loop ata_piix libata sd_mod  
scsi_mod
Feb 16 23:41:33 alon1
Feb 16 23:41:33 alon1 Pid: 4, comm: events/0 Tainted: P         
(2.6.24-gentoo-r2 #1)
Feb 16 23:41:33 alon1 EIP: 0060:[<c01b2db6>] EFLAGS: 00010282 CPU: 0
Feb 16 23:41:33 alon1 EIP is at sysfs_get_dentry+0x26/0x80
Feb 16 23:41:33 alon1 EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX:  
f48a2210
Feb 16 23:41:33 alon1 ESI: f72eb900 EDI: f4803ae0 EBP: f4803ae0 ESP:  
f7c49efc
Feb 16 23:41:33 alon1 hcid[7004]: HCI dev 0 registered
Feb 16 23:41:33 alon1 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Feb 16 23:41:33 alon1 Process events/0 (pid: 4, ti=f7c48000  
task=f7c3efc0 task.ti=f7c48000)
Feb 16 23:41:33 alon1 Stack: f7cb6140 f4822668 f7e71e10 c01b304d  
ffffffff ffffffff fffffffe c030ba9c
Feb 16 23:41:33 alon1 f7cb6140 f4822668 f6da6720 f7cb6140 f4822668  
f6da6720 c030ba8e c01ce20b
Feb 16 23:41:33 alon1 f6e9dd00 c030ba8e f6da6720 f6e9dd00 f6e9dd00  
00000000 f4822600 00000000
Feb 16 23:41:33 alon1 Call Trace:
Feb 16 23:41:33 alon1 [<c01b304d>] sysfs_move_dir+0x3d/0x1f0
Feb 16 23:41:33 alon1 [<c01ce20b>] kobject_move+0x9b/0x120
Feb 16 23:41:33 alon1 [<c0241711>] device_move+0x51/0x110
Feb 16 23:41:33 alon1 [<f9aaed80>] del_conn+0x0/0x70 [bluetooth]
Feb 16 23:41:33 alon1 [<f9aaed99>] del_conn+0x19/0x70 [bluetooth]
Feb 16 23:41:33 alon1 [<c012c1a1>] run_workqueue+0x81/0x140
Feb 16 23:41:33 alon1 [<c02c0c88>] schedule+0x168/0x2e0
Feb 16 23:41:33 alon1 [<c012fc70>] autoremove_wake_function+0x0/0x50
Feb 16 23:41:33 alon1 [<c012c9cb>] worker_thread+0x9b/0xf0
Feb 16 23:41:33 alon1 [<c012fc70>] autoremove_wake_function+0x0/0x50
Feb 16 23:41:33 alon1 [<c012c930>] worker_thread+0x0/0xf0
Feb 16 23:41:33 alon1 [<c012f962>] kthread+0x42/0x70
Feb 16 23:41:33 alon1 [<c012f920>] kthread+0x0/0x70
Feb 16 23:41:33 alon1 [<c0104c2f>] kernel_thread_helper+0x7/0x18
Feb 16 23:41:33 alon1 =======================
Feb 16 23:41:33 alon1 Code: 26 00 00 00 00 57 89 c7 a1 50 1b 3a c0  
56 53 8b 70 38 85 f6 74 08 8b 0e 85 c9 74 58 ff 06 8b 56 50 39 fa 74  
47 89 fb eb 02 89 c3 <8b> 43 08 39 c2 75 f7 8b 46 08 83 c0 68 e8 98  
e7 10 00 8b 43 10
Feb 16 23:41:33 alon1 EIP: [<c01b2db6>] sysfs_get_dentry+0x26/0x80  
SS:ESP 0068:f7c49efc
Feb 16 23:41:33 alon1 ---[ end trace aae864e9592acc1d ]---

Defer hci_unregister_sysfs because hci device could be destructed
while hci conn devices still there.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Stefan Seyfried <seife@suse.de>
Acked-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
2008-03-05 18:45:59 -08:00
Dave Young 8e8440f535 [BLUETOOTH]: l2cap info_timer delete fix in hci_conn_del
When the l2cap info_timer is active the info_state will be set to
L2CAP_INFO_FEAT_MASK_REQ_SENT, and it will be unset after the timer is
deleted or timeout triggered.

Here in l2cap_conn_del only call del_timer_sync when the info_state is
set to L2CAP_INFO_FEAT_MASK_REQ_SENT.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03 12:18:55 -08:00
Thomas Gleixner 3ab2273175 bluetooth: delete timer in l2cap_conn_del()
Delete a possibly armed timer before kfree'ing the connection object.

Solves: http://lkml.org/lkml/2008/2/15/514

Reported-by:Quel Qun <kelk1@comcast.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26 17:42:56 -08:00
Linus Torvalds 07ce198a1e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits)
  [NIU]: Bump driver version and release date.
  [NIU]: Fix BMAC alternate MAC address indexing.
  net: fix kernel-doc warnings in header files
  [IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route.
  [IPV6]: dst_entry leak in ip4ip6_err. (resend)
  bluetooth: do not move child device other than rfcomm
  bluetooth: put hci dev after del conn
  [NET]: Elminate spurious print_mac() calls.
  [BLUETOOTH] hci_sysfs.c: Kill build warning.
  [NET]: Remove MAC_FMT
  net/8021q/vlan_dev.c: Use print_mac.
  [XFRM]: Fix ordering issue in xfrm_dst_hash_transfer().
  [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros
  [IPV6]: Fix hardcoded removing of old module code
  [NETLABEL]: Move some initialization code into __init section.
  [NETLABEL]: Shrink the genl-ops registration code.
  [AX25] ax25_out: check skb for NULL in ax25_kick()
  [TCP]: Fix tcp_v4_send_synack() comment
  [IPV4]: fix alignment of IP-Config output
  Documentation: fix tcp.txt
  ...
2008-02-19 07:52:45 -08:00
Dave Young 8ac62dc773 bluetooth: do not move child device other than rfcomm
hci conn child devices other than rfcomm tty should not be moved here.
This is my lost, thanks for Barnaby's reporting and testing.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com> 
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18 20:45:41 -08:00
Dave Young 0cd63c8089 bluetooth: put hci dev after del conn
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18 20:44:01 -08:00
David S. Miller 988d0093f9 [BLUETOOTH] hci_sysfs.c: Kill build warning.
net/bluetooth/hci_sysfs.c: In function ‘del_conn’:
net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18 00:20:50 -08:00
S.Çağlar Onur 82453021b8 [BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros
The functions time_before, time_before_eq, time_after, and
time_after_eq are more robust for comparing jiffies against other
values.

So following patch implements usage of the time_after() macro, defined
at linux/jiffies.h, which deals with wrapping correctly

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17 23:25:57 -08:00
Harvey Harrison b5606c2d44 remove final fastcall users
fastcall always expands to empty, remove it.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13 16:21:18 -08:00
Dave Young 93d807401c bluetooth rfcomm tty: destroy before tty_close()
rfcomm dev could be deleted in tty_hangup, so we must not call
rfcomm_dev_del again to prevent from destroying rfcomm dev before tty
close.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:12:06 -08:00
Andrew Morton 91f5cca3d1 bluetooth: uninlining
Remove all those inlines which were either a) unneeded or b) increased code
size.

          text    data     bss     dec     hex filename
before:   6997      74       8    7079    1ba7 net/bluetooth/hidp/core.o
after:    6492      74       8    6574    19ae net/bluetooth/hidp/core.o

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:07:58 -08:00
Dave Young eff001e35a bluetooth: hidp_process_hid_control remove unnecessary parameter dealing
According to the bluetooth HID spec v1.0 chapter 7.4.2

"This code requests a major state change in a BT-HID device.  A HID_CONTROL
request does not generate a HANDSHAKE response."

"A HID_CONTROL packet with a parameter of VIRTUAL_CABLE_UNPLUG is the only
HID_CONTROL packet a device can send to a host.  A host will ignore all other
packets."

So in the hidp_precess_hid_control function, we just need to deal with the
UNLUG packet.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:07:14 -08:00
Dave Young 5396c9356e [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.
Jens Axboe noticed that we were queueing &conn->work on both btaddconn
and keventd_wq.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:33 -08:00
Dave Young b6c0632105 [BLUETOOTH]: Add conn add/del workqueues to avoid connection fail.
The bluetooth hci_conn sysfs add/del executed in the default
workqueue.  If the del_conn is executed after the new add_conn with
same target, add_conn will failed with warning of "same kobject name".

Here add btaddconn & btdelconn workqueues, flush the btdelconn
workqueue in the add_conn function to avoid the issue.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:12 -08:00
Julia Lawall 67b23219ce [BLUETOOTH]: Use sockfd_put()
The function sockfd_lookup uses fget on the value that is stored in
the file field of the returned structure, so fput should ultimately be
applied to this value.  This can be done directly, but it seems better
to use the specific macro sockfd_put, which does the same thing.

The problem was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression s;
@@

   s = sockfd_lookup(...)
   ...
+  sockfd_put(s);
?- fput(s->file);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:48 -08:00
Pavel Emelyanov b24b8a247f [NET]: Convert init_timer into setup_timer
Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:35 -08:00
Dave Young acea6852f3 [BLUETOOTH]: Move children of connection device to NULL before connection down.
The rfcomm tty device will possibly retain even when conn is down, and
sysfs doesn't support zombie device moving, so this patch move the tty
device before conn device is destroyed.

For the bug refered please see :
http://lkml.org/lkml/2007/12/28/87

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-23 03:11:39 -08:00
Dave Young f951375d47 [BLUETOOTH]: rfcomm tty BUG_ON() code fix
1) In tty.c the BUG_ON at line 115 will never be called, because the the
   before list_del_init in this same function.
	115          BUG_ON(!list_empty(&dev->list));
   So move the list_del_init to rfcomm_dev_del 

2) The rfcomm_dev_del could be called from diffrent path
   (rfcomm_tty_hangup/rfcomm_dev_state_change/rfcomm_release_dev),

   So add another BUG_ON when the rfcomm_dev_del is called more than
   one time.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-10 22:22:52 -08:00
Dave Young 38b7da09cf [BLUETOOTH]: put_device before device_del fix
Because of workqueue delay, the put_device could be called before
device_del, so move it to del_conn.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com> 
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-29 19:17:47 -08:00
Pavel Emelyanov 6257ff2177 [NET]: Forget the zero_it argument of sk_alloc()
Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.

Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.

This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope 
this particular split helped.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 00:39:31 -07:00
Marcel Holtmann a524eccc73 [Bluetooth] Convert RFCOMM to use kthread API
This patch does the full kthread conversion for the RFCOMM protocol. It
makes the code slightly simpler and more maintainable.

Based on a patch from Christoph Hellwig <hch@lst.de>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:49 -07:00
Marcel Holtmann b6a0dc8224 [Bluetooth] Add support for handling simple eSCO links
With the Bluetooth 1.2 specification the Extended SCO feature for
better audio connections was introduced. So far the Bluetooth core
wasn't able to handle any eSCO connections correctly. This patch
adds simple eSCO support while keeping backward compatibility with
older devices.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:47 -07:00
Marcel Holtmann dae6a0f663 [Bluetooth] Add address and channel attribute to RFCOMM TTY device
Export the remote device address and channel of RFCOMM TTY device
via sysfs attributes. This allows udev to create better naming rules
for configured RFCOMM devices.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:47 -07:00
Dave Young 6792b5ec8d [Bluetooth] Fix wrong argument in debug code of HIDP
In the debug code of the hidp_queue_report function, the device
variable does not exist, replace it with session->hid.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:46 -07:00
Marcel Holtmann 6464f35f37 [Bluetooth] Fall back to L2CAP in basic mode
In case the remote entity tries to negogiate retransmission or flow
control mode, reject it and fall back to basic mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:43 -07:00
Marcel Holtmann f0709e03ac [Bluetooth] Advertise L2CAP features mask support
Indicate the support for the L2CAP features mask value when the remote
entity tries to negotiate Bluetooth 1.2 specific features.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:42 -07:00
Marcel Holtmann 4e8402a3f8 [Bluetooth] Retrieve L2CAP features mask on connection setup
The Bluetooth 1.2 specification introduced a specific features mask
value to interoperate with newer versions of the specification. So far
this piece of information was never needed, but future extensions will
rely on it. This patch adds a generic way to retrieve this information
only once per connection setup.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:41 -07:00
Marcel Holtmann 861d6882b3 [Bluetooth] Remove global conf_mtu variable from L2CAP
After the change to the L2CAP configuration parameter handling the
global conf_mtu variable is no longer needed and so remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:41 -07:00
Marcel Holtmann 876d9484ed [Bluetooth] Finish L2CAP configuration only with acceptable settings
The parameters of the L2CAP output configuration might not be accepted
after the first configuration round. So only indicate a finished output
configuration when acceptable settings are provided.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:40 -07:00
Marcel Holtmann a9de924806 [Bluetooth] Switch from OGF+OCF to using only opcodes
The Bluetooth HCI commands are divided into logical OGF groups for
easier identification of their purposes. While this still makes sense
for the written specification, its makes the code only more complex
and harder to read. So instead of using separate OGF and OCF values
to identify the commands, use a common 16-bit opcode that combines
both values. As a side effect this also reduces the complexity of
OGF and OCF calculations during command header parsing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-22 02:59:40 -07:00
Jan Engelhardt 96de0e252c Convert files to UTF-8 and some cleanups
* Convert files to UTF-8.

  * Also correct some people's names
    (one example is Eißfeldt, which was found in a source file.
    Given that the author used an ß at all in a source file
    indicates that the real name has in fact a 'ß' and not an 'ss',
    which is commonly used as a substitute for 'ß' when limited to
    7bit.)

  * Correct town names (Goettingen -> Göttingen)

  * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313)

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:21:04 +02:00
Jiri Slaby 7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
WANG Cong 53465eb4ab [BLUETOOTH]: Make hidp_setup_input() return int
This patch:
- makes hidp_setup_input() return int to indicate errors;
- checks its return value to handle errors.

And this time it is against -rc7-mm1 tree.

Thanks to roel and Marcel Holtmann for comments.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:39 -07:00
Eric W. Biederman 1b8d7ae42d [NET]: Make socket creation namespace safe.
This patch passes in the namespace a new socket should be created in
and has the socket code do the appropriate reference counting.  By
virtue of this all socket create methods are touched.  In addition
the socket create methods are modified so that they will fail if
you attempt to create a socket in a non-default network namespace.

Failing if we attempt to create a socket outside of the default
network namespace ensures that as we incrementally make the network stack
network namespace aware we will not export functionality that someone
has not audited and made certain is network namespace safe.
Allowing us to partially enable network namespaces before all of the
exotic protocols are supported.

Any protocol layers I have missed will fail to compile because I now
pass an extra parameter into the socket creation code.

[ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ]

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:07 -07:00
David S. Miller 1da97f83a8 [BLUETOOTH]: Fix non-COMPAT build of hci_sock.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-12 14:10:58 +02:00
Marcel Holtmann 89f2783ded [Bluetooth] Fix parameter list for event filter command
On device initialization the event filters are cleared. In case of
clearing the filters the extra condition type shall be omitted.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:49 +02:00
Marcel Holtmann 7c631a6760 [Bluetooth] Update security filter for Bluetooth 2.1
This patch updates the HCI security filter with support for the
Bluetooth 2.1 commands and events.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:43 +02:00
Marcel Holtmann 767c5eb5d3 [Bluetooth] Add compat handling for timestamp structure
The timestamp structure needs special handling in case of compat
programs. Use the same wrapping method the network core uses.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-09-09 08:39:34 +02:00
Al Viro d83852822c [BLUETOOTH] l2cap: don't mangle cmd.len
Since nobody uses it after we convert it to host-endian,
no need to do that at all.  At that point l2cap is endian-clean.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:09 -07:00
Al Viro 88219a0f65 [BLUETOOTH]: pass (host-endian) cmd length as explicit argument to l2cap_conf_req()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:08 -07:00
Al Viro 8e036fc314 [BLUETOOTH] l2cap: endianness annotations
no code changes, just documenting existing types

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:07 -07:00
Al Viro 6dc0c2082b [BLUETOOTH]: Fix endianness bug in l2cap_sock_listen()
We loop through psm values, calling __l2cap_get_sock_by_addr(psm, ...)
until we get NULL; then we set ->psm of our socket to htobs(psm).
IOW, we find unused psm value and put it into our socket.  So far, so
good, but...  __l2cap_get_sock_by_addr() compares its argument with
->psm of sockets.  IOW, the entire thing works correctly only on
little-endian.  On big-endian we'll get "no socket with such psm"
on the first iteration, since we won't find a socket with ->psm == 0x1001.
We will happily conclude that 0x1001 is unused and slap htobs(0x1001)
(i.e. 0x110) into ->psm of our socket.  Of course, the next time around
the same thing will repeat and we'll just get a fsckload of sockets
with the same ->psm assigned.

Fix: pass htobs(psm) to __l2cap_get_sock_by_addr() there.  All other
callers are already passing little-endian values and all places that
store something in ->psm are storing little-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:06 -07:00
Marcel Holtmann 09c7d8293a [IRDA]: Fix rfcomm use-after-free
Adrian Bunk wrote:
> Commit 8de0a15483 added the following
> use-after-free in net/bluetooth/rfcomm/tty.c:
>
> <--  snip  -->
>
> ...
> static int rfcomm_dev_add(struct rfcomm_dev_req *req, struct rfcomm_dlc *dlc)
> {
> ...
>         if (IS_ERR(dev->tty_dev)) {
>                 list_del(&dev->list);
>                 kfree(dev);
>                 return PTR_ERR(dev->tty_dev);
>         }
> ...
>
> <--  snip  -->
>
> Spotted by the Coverity checker.

really good catch. I fully overlooked that one. The attached patch
should fix it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 02:28:05 -07:00
YOSHIFUJI Hideaki 00ae02f315 [NET] BLUETOOTH: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-07-19 10:43:16 +09:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Marcel Holtmann 5b7f990927 [Bluetooth] Add basics to better support and handle eSCO links
To better support and handle eSCO links in the future a bunch of
constants needs to be added and some basic routines need to be
updated. This is the initial step.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 07:35:32 +02:00
Ville Tervo 8de0a15483 [Bluetooth] Keep rfcomm_dev on the list until it is freed
This patch changes the RFCOMM TTY release process so that the TTY is kept
on the list until it is really freed. A new device flag is used to keep
track of released TTYs.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 07:06:51 +02:00
Mikko Rapeli 84950cf0ba [Bluetooth] Hangup TTY before releasing rfcomm_dev
The core problem is that RFCOMM socket layer ioctl can release
rfcomm_dev struct while RFCOMM TTY layer is still actively using
it. Calling tty_vhangup() is needed for a synchronous hangup before
rfcomm_dev is freed.

Addresses the oops at http://bugzilla.kernel.org/show_bug.cgi?id=7509

Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 07:01:26 +02:00
Marcel Holtmann ef222013fc [Bluetooth] Add hci_recv_fragment() helper function
Most drivers must handle fragmented HCI data packets and events. This
patch adds a generic function for their reassembly to the Bluetooth
core layer and thus allows to shrink the complexity of the drivers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 06:42:04 +02:00
David Woodhouse 1c39858b5d Fix use-after-free oops in Bluetooth HID.
When cleaning up HIDP sessions, we currently close the ACL connection
before deregistering the input device. Closing the ACL connection
schedules a workqueue to remove the associated objects from sysfs, but
the input device still refers to them -- and if the workqueue happens to
run before the input device removal, the kernel will oops when trying to
look up PHYSDEVPATH for the removed input device.

Fix this by deregistering the input device before closing the
connections.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-07 12:22:37 -07:00
Marcel Holtmann 5dee9e7c4c [Bluetooth] Fix L2CAP configuration parameter handling
The L2CAP configuration parameter handling was missing the support
for rejecting unknown options. The capability to reject unknown
options is mandatory since the Bluetooth 1.2 specification. This
patch implements its and also simplifies the parameter parsing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-24 14:27:19 +02:00
Satyam Sharma 4ce61d1c7a [BLUETOOTH]: Fix locking in hci_sock_dev_event().
We presently use lock_sock() to acquire a lock on a socket in
hci_sock_dev_event(), but this goes BUG because lock_sock()
can sleep and we're already holding a read-write spinlock at
that point. So, we must use the non-sleeping BH version,
bh_lock_sock().

However, hci_sock_dev_event() is called from user context and
hence using simply bh_lock_sock() will deadlock against a
concurrent softirq that tries to acquire a lock on the same
socket. Hence, disabling BH's before acquiring the socket lock
and enable them afterwards, is the proper solution to fix
socket locking in hci_sock_dev_event().

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-17 14:20:30 -07:00
Linus Torvalds 5884c40668 Merge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: hiddev - fix race between hiddev_send_event() and hiddev_release()
  HID: add hooks for getkeycode() and setkeycode() methods
  HID: switch to using input_dev->dev.parent
  USB HID: Logitech wheel 0x046d/0xc294 needs HID_QUIRK_NOGET quirk
  USB HID: usb_buffer_free() cleanup
  USB HID: report descriptor of Cypress USB barcode readers needs fixup
  Bluetooth HID: HIDP - don't initialize force feedback
  USB HID: update CONFIG_USB_HIDINPUT_POWERBOOK description
  HID: add input mappings for non-working keys on Logitech S510 remote
2007-05-11 09:56:05 -07:00
Marcel Holtmann 5be3946647 [Bluetooth] Switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input core
conversion, switch to using input_dev->dev.parent when specifying
device position in sysfs tree.

Also, do not access input_dev->private directly, use helpers and
do not use kfree() on input device, use input_free_device() instead.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-10 23:45:03 -07:00
Martin Schwidefsky 9556fb73ed [S390] Kconfig: unwanted menus for s390.
Disable some more menus in the configuration files that are of no
interest to a s390 machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 15:46:07 +02:00
Jiri Kosina 3b180bff4c Bluetooth HID: HIDP - don't initialize force feedback
The current implementation of force feedback for HID devices is
USB-transport only and therefore calling hid_ff_init() from hidp code is
not going to work (plus it creates unwanted dependency of hidp on usbhid).
Remove the hid_ff_init() until either the hid-ff is made
transport-independent, or at least support for bluetooth transport is
added.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-09 02:52:51 +02:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Linus Torvalds d12db0b08f Fix bluetooth HCI sysfs compile
More fallout from the removal of "struct subsystem" from the core device
model.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 17:32:08 -07:00
Marcel Holtmann 9cf5b0ea3a [Bluetooth] Disconnect L2CAP connection after last RFCOMM DLC
The RFCOMM specification says that the device closing the last DLC on
a particular session is responsible for closing the multiplexer by
closing the corresponding L2CAP channel.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:36:13 +02:00
Marcel Holtmann 77f2a45fa1 [Bluetooth] Check that device is in rfcomm_dev_list before deleting
If RFCOMM_RELEASE_ONHUP flag is on and rfcomm_release_dev is called
before connection is closed, rfcomm_dev is deleted twice from the
rfcomm_dev_list and refcount is messed up. This patch adds a check
before deleting device that the device actually is listed.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:36:10 +02:00
Marcel Holtmann 48db9ca4f2 [Bluetooth] Use in-kernel sockets API
The kernel provides a new convenient way to access the sockets API for
in-kernel users. It is a good idea to actually use it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:36:06 +02:00
Marcel Holtmann 53c1d4b0b2 [Bluetooth] Attach host adapters to the Bluetooth bus
The Bluetooth host adapters are attached to the Bluetooth class and the
low-level connections are children of these class devices. Having class
devices as parent of bus devices breaks a lot of reasonable assumptions
about sysfs. The host adapters should be attached to the Bluetooth bus
to simplify the dependency resolving. For compatibility an additional
symlink from the Bluetooth class will be used.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:36:03 +02:00
Marcel Holtmann 0878b6667f [Bluetooth] Fix L2CAP and HCI setsockopt() information leaks
The L2CAP and HCI setsockopt() implementations have a small information
leak that makes it possible to leak kernel stack memory to userspace.

If the optlen parameter is 0, no data will be copied by copy_from_user(),
but the uninitialized stack buffer will be read and stored later. A call
to getsockopt() can now retrieve the leaked information.

To fix this problem the stack buffer given to copy_from_user() must be
initialized with the current settings.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-05-05 00:35:59 +02:00
Andrew Morton 74da9d88bf [BLUETOOTH] rfcomm_worker(): fix wakeup race
Set TASK_INTERRUPTIBLE prior to testing the flag to avoid missed wakeups.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:41:01 -07:00
Stephen Hemminger 3ff50b7997 [NET]: cleanup extra semicolons
Spring cleaning time...

There seems to be a lot of places in the network code that have
extra bogus semicolons after conditionals.  Most commonly is a
bogus semicolon after: switch() { }

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:24 -07:00
Arnaldo Carvalho de Melo d626f62b11 [SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}
To clearly state the intent of copying from linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25 22:28:23 -07:00
Arnaldo Carvalho de Melo 27a884dc3c [SK_BUFF]: Convert skb->tail to sk_buff_data_t
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:28 -07:00
Arnaldo Carvalho de Melo 9c70220b73 [SK_BUFF]: Introduce skb_transport_header(skb)
For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:31 -07:00
Arnaldo Carvalho de Melo badff6d01a [SK_BUFF]: Introduce skb_reset_transport_header(skb)
For the common, open coded 'skb->h.raw = skb->data' operation, so that we can
later turn skb->h.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple cases:

skb->h.raw = skb->data;
skb->h.raw = {skb_push|[__]skb_pull}()

The next ones will handle the slightly more "complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:15 -07:00
Arnaldo Carvalho de Melo 98e399f82a [SK_BUFF]: Introduce skb_mac_header()
For the places where we need a pointer to the mac header, it is still legal to
touch skb->mac.raw directly if just adding to, subtracting from or setting it
to another layer header.

This one also converts some more cases to skb_reset_mac_header() that my
regex missed as it had no spaces before nor after '=', ugh.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:41 -07:00
Arnaldo Carvalho de Melo 459a98ed88 [SK_BUFF]: Introduce skb_reset_mac_header(skb)
For the common, open coded 'skb->mac.raw = skb->data' operation, so that we can
later turn skb->mac.raw into a offset, reducing the size of struct sk_buff in
64bit land while possibly keeping it as a pointer on 32bit.

This one touches just the most simple case, next will handle the slightly more
"complex" cases.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:32 -07:00
Arnaldo Carvalho de Melo 4c13eb6657 [ETH]: Make eth_type_trans set skb->dev like the other *_type_trans
One less thing for drivers writers to worry about.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:30 -07:00
YOSHIFUJI Hideaki aca3192cc6 [NET] BLUETOOTH: Use cpu_to_le{16,32}() where appropriate.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:54 -07:00
Jiri Kosina cb3fecc2f2 [PATCH] bluetooth hid quirks: mightymouse quirk
I have a bugreport that scrollwheel of bluetooth version of apple
mightymouse doesn't work.  The USB version of mightymouse works, as there
is a quirk for handling scrollwheel in hid/usbhid for it.

Now that bluetooth git tree is hooked to generic hid layer, it could easily
use the quirks which are already present in generic hid parser, hid-input,
etc.

Below is a simple patch against bluetooth git tree, which adds quirk
handling to current bluetooth hidp code, and sets quirk flags for device
0x05ac/0x030c, which is the bluetooth version of the apple mightymouse.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-29 08:22:24 -07:00
Dave Jones b6f99a2119 [NET]: fix up misplaced inlines.
Turning up the warnings on gcc makes it emit warnings
about the placement of 'inline' in function declarations.
Here's everything that was under net/

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-22 12:27:49 -07:00
Jiri Kosina b40df5743e [PATCH] bluetooth: fix socket locking in hci_sock_dev_event()
[Bluetooth] Fix socket locking in hci_sock_dev_event()

hci_sock_dev_event() uses bh_lock_sock() to lock the socket lock.
This is not deadlock-safe against locking of the same socket lock in
l2cap_connect_cfm() from softirq context. In addition to that,
hci_sock_dev_event() doesn't seem to be called from softirq context,
so it is safe to use lock_sock()/release_sock() instead.

The lockdep warning can be triggered on my T42p simply by switching
the Bluetooth off by the keyboard button.

  =================================
  [ INFO: inconsistent lock state ]
  2.6.21-rc2 #4
  ---------------------------------
  inconsistent {in-softirq-W} -> {softirq-on-W} usage.
  khubd/156 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (slock-AF_BLUETOOTH){-+..}, at: [<e0ca5520>] hci_sock_dev_event+0xa8/0xc5 [bluetooth]
  {in-softirq-W} state was registered at:
    [<c012d1db>] mark_lock+0x59/0x414
    [<e0cef688>] l2cap_connect_cfm+0x4e/0x11f [l2cap]
    [<c012dfd7>] __lock_acquire+0x3e5/0xb99
    [<e0cef688>] l2cap_connect_cfm+0x4e/0x11f [l2cap]
    [<c012e7f2>] lock_acquire+0x67/0x81
    [<e0cef688>] l2cap_connect_cfm+0x4e/0x11f [l2cap]
    [<c036ee72>] _spin_lock+0x29/0x34
    [<e0cef688>] l2cap_connect_cfm+0x4e/0x11f [l2cap]
    [<e0cef688>] l2cap_connect_cfm+0x4e/0x11f [l2cap]
    [<e0ca17c3>] hci_send_cmd+0x126/0x14f [bluetooth]
    [<e0ca4ce4>] hci_event_packet+0x729/0xebd [bluetooth]
    [<e0ca205b>] hci_rx_task+0x2a/0x20f [bluetooth]
    [<e0ca209d>] hci_rx_task+0x6c/0x20f [bluetooth]
    [<c012d7be>] trace_hardirqs_on+0x10d/0x14e
    [<c011ac85>] tasklet_action+0x3d/0x68
    [<c011abba>] __do_softirq+0x41/0x92
    [<c011ac32>] do_softirq+0x27/0x3d
    [<c0105134>] do_IRQ+0x7b/0x8f
    [<c0103dec>] common_interrupt+0x24/0x34
    [<c0103df6>] common_interrupt+0x2e/0x34
    [<c0248e65>] acpi_processor_idle+0x1b3/0x34a
    [<c0248e68>] acpi_processor_idle+0x1b6/0x34a
    [<c010232b>] cpu_idle+0x39/0x4e
    [<c04bab0c>] start_kernel+0x372/0x37a
    [<c04ba42b>] unknown_bootoption+0x0/0x202
    [<ffffffff>] 0xffffffff

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08 07:38:21 -08:00
Marcel Holtmann c1a3313698 [Bluetooth] Make use of device_move() for RFCOMM TTY devices
In the case of bound RFCOMM TTY devices the parent is not available
before its usage. So when opening a RFCOMM TTY device, move it to
the corresponding ACL device as a child. When closing the device,
move it back to the virtual device tree.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-26 11:42:41 -08:00
Marcel Holtmann f5ffd4620a [Bluetooth] Add open and close callbacks for HID device
The open and close callbacks for the HID device are not optional, but
for the Bluetooth HID report mode support it is enough to add empty
dummy callbacks.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-26 11:42:39 -08:00
Marcel Holtmann e1aaadd4d8 [Bluetooth] Add support for using the HID subsystem
This patch extends the current Bluetooth HID support to use the new
HID subsystem and adds full report mode support.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-26 11:42:38 -08:00
Marcel Holtmann a83d6c0de8 [Bluetooth] Fix wrong put_user() from HIDP compat ioctl patch
The compat ioctl patch copied the parser version field into the
report descriptor size field by mistake.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-02-26 11:42:35 -08:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
YOSHIFUJI Hideaki 8e87d14255 [NET] BLUETOOTH: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:20 -08:00
Al Viro 55e747445b [PATCH] hidp __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:14:06 -08:00
Marcel Holtmann 847641d7db [Bluetooth] Restrict well known PSM to privileged users
The PSM values below 0x1001 of L2CAP are reserved for well known
services. Restrict the possibility to bind them to privileged
users.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-22 22:00:45 +01:00
Marcel Holtmann 7386397636 [Bluetooth] Missing endian swapping for L2CAP socket list
The PSM value in the L2CAP socket list must be converted to host
order before printing it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-22 22:00:40 +01:00
Marcel Holtmann c893779e9f [Bluetooth] Handle device registration failures
In the case the device registration for a new Bluetooth low-level
connection fails there is no need to unregister it when the temporary
data structure has been removed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-09 00:29:56 -08:00
Marcel Holtmann 4d6a2188bd [Bluetooth] Fix uninitialized return value for RFCOMM sendmsg()
When calling send() with a zero length parameter on a RFCOMM socket
it returns a positive value. In this rare case the variable err is
used uninitialized and unfortunately its value is returned.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-09 00:29:55 -08:00
Marcel Holtmann b6e557fbf1 [Bluetooth] More checks if DLC is still attached to the TTY
If the DLC device is no longer attached to the TTY device, then return
errors or default values for various callbacks of the TTY layer.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-09 00:29:54 -08:00
Marcel Holtmann f477756920 [Bluetooth] Add packet size checks for CAPI messages
With malformed packets it might be possible to overwrite internal
CMTP and CAPI data structures. This patch adds additional length
checks to prevent these kinds of remote attacks.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-01-09 00:29:53 -08:00
Al Viro 905f3ed625 [PATCH] hci endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:52 -08:00
Alan Cox 606d099cdd [PATCH] tty: switch to ktermios
This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:57 -08:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Peter Zijlstra fcc70d5fdc [BLUETOOTH] lockdep: annotate sk_lock nesting in AF_BLUETOOTH
=============================================
[ INFO: possible recursive locking detected ]
2.6.18-1.2726.fc6 #1
2006-12-02 21:21:35 -08:00
Al Viro e8db8c9910 [BLUETOOTH] rfcomm endianness bug: param_mask is little-endian on the wire
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:30 -08:00
Al Viro 6ba9c755e5 [BLUETOOTH]: rfcomm endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:29 -08:00
Al Viro 1bc5d4483a [BLUETOOTH]: bnep endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:28 -08:00
Al Viro e41d216973 [BLUETOOTH] bnep endianness bug: filtering by packet type
<= and => don't work well on net-endian...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:27 -08:00
David Howells c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
David S. Miller 4498c80d9c [BLUETOOTH]: Fix unaligned access in hci_send_to_sock.
The "u16 *" derefs of skb->data need to be wrapped inside of
a get_unaligned().

Thanks to Gustavo Zacarias for the bug report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-21 16:17:41 -08:00
Marcel Holtmann 354f60a995 [Bluetooth] Ignore L2CAP config requests on disconnect
Any L2CAP connection in disconnecting state shall not response
to any further config requests from the remote side. So in case
such a request is received, ignore it.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:32 -08:00
Marcel Holtmann 820ae1b865 [Bluetooth] Always include MTU in L2CAP config responses
When sending a positive config response it shall include the actual
MTU to be used on this channel. This differs from the Bluetooth 1.1
specification where it was enough to acknowledge the config request.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:31 -08:00
Marcel Holtmann ff2d367ac3 [Bluetooth] Check if RFCOMM session is still attached to the TTY
If the RFCOMM session is no longer attached to the TTY device, then it
makes no sense to go through with changing the termios settings.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:30 -08:00
Marcel Holtmann 6bd5741612 [Bluetooth] Handling pending connect attempts after inquiry
After an inquiry completed or got canceled the Bluetooth core should
check for any pending connect attempts.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:29 -08:00
Marcel Holtmann e52726dece [Bluetooth] Attach low-level connections to the Bluetooth bus
To receive uvents for the low-level ACL and SCO links, they must be
assigned to a subsystem. It is enough to attach them to the already
established Bluetooth bus.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-21 16:16:28 -08:00
Marcel Holtmann 7b19ffc40b [Bluetooth] Fix HID disconnect NULL pointer dereference
The latest HID disconnect sequence change introduced a NULL pointer
dereference. For the quirk to handle buggy remote HID implementations,
it is enough to wait for a potential control channel disconnect from
the remote side and it is also enough to wait only 500 msecs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-20 01:15:05 -07:00
Marcel Holtmann 74da626a10 [Bluetooth] Add locking for bt_proto array manipulation
The bt_proto array needs to be protected by some kind of locking to
prevent a race condition between bt_sock_create and bt_sock_register.

And in addition all calls to sk_alloc need to be made GFP_ATOMIC now.

Signed-off-by: Masatake YAMATO <jet@gyve.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:34 -07:00
Marcel Holtmann cb19d9ea2c [Bluetooth] Check if DLC is still attached to the TTY
If the DLC device is no longer attached to the TTY device, then it
makes no sense to go through with changing the termios settings.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:33 -07:00
Marcel Holtmann b2cfcd75df [Bluetooth] Fix reference count when connection lookup fails
When the connection lookup for the device structure fails, the reference
count for the HCI device needs to be decremented.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:32 -07:00
Marcel Holtmann e86070c83e [Bluetooth] Disconnect HID interrupt channel first
The Bluetooth HID specification demands that the interrupt channel
shall be disconnected first. This is needed to pass the qualification
tests.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:31 -07:00
Marcel Holtmann 4c67bc74f0 [Bluetooth] Support concurrent connect requests
Most Bluetooth chips don't support concurrent connect requests, because
this would involve a multiple baseband page with only one radio. In the
case an upper layer like L2CAP requests a concurrent connect these chips
return the error "Command Disallowed" for the second request. If this
happens it the responsibility of the Bluetooth core to queue the request
and try again after the previous connect attempt has been completed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:30 -07:00
Marcel Holtmann e9c4bec63e [Bluetooth] Make use of virtual devices tree
The Bluetooth subsystem currently uses a platform device for devices
with no parent. It is a better idea to use the new virtual devices
tree for these.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:29 -07:00
Marcel Holtmann df5c37ea9a [Bluetooth] Handle return values from driver core functions
Some return values of the driver core register and create functions
are not handled and so might cause unexpected problems.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:28 -07:00
Marcel Holtmann e9c5702e3c [Bluetooth] Fix compat ioctl for BNEP, CMTP and HIDP
There exists no attempt do deal with the fact that a structure with
a uint32_t followed by a pointer is going to be different for 32-bit
and 64-bit userspace. Any 32-bit process trying to use it will be
failing with -EFAULT if it's lucky; suffering from having data dumped
at a random address if it's not.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:14:27 -07:00
Jeff Dike b68e31d0eb [PATCH] const struct tty_operations
As part of an SMP cleanliness pass over UML, I consted a bunch of
structures in order to not have to document their locking.  One of these
structures was a struct tty_operations.  In order to const it in UML
without introducing compiler complaints, the declaration of
tty_set_operations needs to be changed, and then all of its callers need to
be fixed.

This patch declares all struct tty_operations in the tree as const.  In all
cases, they are static and used only as input to tty_set_operations.  As an
extra check, I ran an i386 allyesconfig build which produced no extra
warnings.

53 drivers are affected.  I checked the history of a bunch of them, and in
most cases, there have been only a handful of maintenance changes in the
last six months.  serial_core.c was the busiest one that I looked at.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:14 -07:00
Arnaud Patard 860e13b5c5 [Bluetooth]: Fix section mismatch of bt_sysfs_cleanup()
The bt_sysfs_cleanup() is marked with __exit attribute, but it will
be called from an __init function in the error case. So the __exit
attribute must be removed.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:03:12 -07:00
Marcel Holtmann 37e97b4ef0 [Bluetooth]: Don't update disconnect timer for incoming connections
In the case of device pairing the only safe method is to establish
a low-level ACL link. In this case, the remote side should not use
the disconnect timer to give the other side the chance to enter the
PIN code. If the disconnect timer is used, the connection will be
dropped to soon, because it is impossible to identify an actual user
of this link.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28 18:03:11 -07:00
Marcel Holtmann 6ac59344ef [Bluetooth] Support create connection cancel command
In case of non-blocking connects it is possible that the last user
of an ACL link quits before the connection has been fully established.
This will lead to a race condition where the internal state of a
connection is closed, but the actual link has been established and is
active. In case of Bluetooth 1.2 and later devices it is possible to
call create connection cancel to abort the connect. For older devices
the disconnect timer will be used to trigger the needed disconnect.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:33 -07:00
Marcel Holtmann 1143e5a6d4 [Bluetooth] Read local version information on device init
The local version information are needed to identify certain feature
sets of devices. They must be read on device init and stored for later
use. It is also possible to access them through the device model.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:32 -07:00
Marcel Holtmann b4c612a473 [Bluetooth] Return EINPROGRESS for non-blocking socket calls
In case of non-blocking socket calls we should return EINPROGRESS
and not EAGAIN.

Signed-off-by: Ulisses Furquim <ulissesf@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:31 -07:00
Marcel Holtmann defc761bc2 [Bluetooth] Handle command complete event for exit periodic inquiry
The command complete event of the exit periodic inquiry command must
clear the HCI_INQUIRY flag and finish the HCI request.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:29 -07:00
Marcel Holtmann 0ac53939a0 [Bluetooth] Add HCI device identifier for SDIO cards
This patch assigns the next free HCI device identifier to Bluetooth
devices based on the SDIO interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:28 -07:00
Marcel Holtmann 0a85b964e1 [Bluetooth] Integrate services into the driver model
This patch integrates the services of the Bluetooth protocols RFCOMM,
BNEP and HIDP into the driver model. This makes it possible to assign
the virtual TTY, network and input devices to a specific Bluetooth
connection.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:26 -07:00
Marcel Holtmann b219e3ac66 [Bluetooth] Integrate low-level connections into the driver model
This patch integrates the low-level connections (ACL and SCO) into the
driver model. Every connection is presented as device with the parent
set to its host controller device.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:25 -07:00
Marcel Holtmann 4d0eb0049c [Bluetooth] Remove unused host controller attributes
This patch removes the unused device attribute entries for the Bluetooth
host controllers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-28 18:01:24 -07:00
Marcel Holtmann 98bcd08b5b [Bluetooth] Correct RFCOMM channel MTU for broken implementations
Some Bluetooth RFCOMM implementations try to negotiate a bigger channel
MTU than we can support for a particular session. The maximum MTU for
a RFCOMM session is limited through the L2CAP layer. So if the other
side proposes a channel MTU that is bigger than the underlying L2CAP
MTU, we should reduce it to the L2CAP MTU of the session minus five
bytes for the RFCOMM headers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:25 -07:00
Marcel Holtmann fd1278d720 [Bluetooth] Fix deadlock in the L2CAP layer
The Bluetooth L2CAP layer has 2 locks that are used in softirq context,
(one spinlock and one rwlock, where the softirq usage is readlock) but
where not all usages of the lock were _bh safe. The patch below corrects
this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:35 -07:00
Marcel Holtmann 0263603a01 [Bluetooth] Let BT_HIDP depend on INPUT
This patch lets BT_HIDP depend on instead of select INPUT. This fixes
the following warning during an s390 build:

net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol
'BT_HIDP' refer to undefined symbol 'INPUT'

A dependency on INPUT also implies !S390 (and therefore makes the
explicit dependency obsolete) since INPUT is not available on s390.

The practical difference should be nearly zero, since INPUT is always
set to y unless EMBEDDED=y (or S390=y).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:33 -07:00
Marcel Holtmann 25ea6db04a [Bluetooth] Remaining transitions to use kzalloc()
This patch makes the remaining transitions to use kzalloc().

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:28 -07:00
Marcel Holtmann 300b93974f [Bluetooth] Add RFCOMM role switch support
This patch adds the support for RFCOMM role switching before the
connection is fully established.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:09 -07:00
Marcel Holtmann 7c2660b00f [Bluetooth] Allow disabling of credit based flow control
This patch adds the module parameter disable_cfc which can be used to
disable the credit based flow control. The credit based flow control
was introduced with the Bluetooth 1.1 specification and devices can
negotiate its support, but for testing purpose it is helpful to allow
disabling of it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:07 -07:00
Marcel Holtmann 0139418c94 [Bluetooth] Small cleanup of the L2CAP source code
This patch is a small cleanup of the L2CAP source code. It makes some
coding style changes and moves some functions around to avoid forward
declarations.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:05 -07:00
Marcel Holtmann a91f2e396f [Bluetooth] Use real devices for host controllers
This patch converts the Bluetooth class devices into real devices. The
Bluetooth class is kept and the driver core provides the appropriate
symlinks for backward compatibility.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:02 -07:00
Marcel Holtmann 27d3528425 [Bluetooth] Add platform device for virtual and serial devices
This patch adds a generic Bluetooth platform device that can be used
as parent device by virtual and serial devices.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:54:00 -07:00
Marcel Holtmann 04837f6447 [Bluetooth] Add automatic sniff mode support
This patch introduces the automatic sniff mode feature. This allows
the host to switch idle connections into sniff mode to safe power.

Signed-off-by: Ulisses Furquim <ulissesf@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:53:58 -07:00
Marcel Holtmann da1f519851 [Bluetooth] Correct SCO buffer size on request
This patch introduces a quirk that allows the drivers to tell the host
to correct the SCO buffer size values.

Signed-off-by: Olivier Galibert <galibert@pobox.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 19:53:56 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds 602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Paul Fulghum 817d6d3bce [PATCH] remove TTY_DONT_FLIP
Remove TTY_DONT_FLIP tty flag.  This flag was introduced in 2.1.X kernels
to prevent the N_TTY line discipline functions read_chan() and
n_tty_receive_buf() from running at the same time.  2.2.15 introduced
tty->read_lock to protect access to the N_TTY read buffer, which is the
only state requiring protection between these two functions.

The current TTY_DONT_FLIP implementation is broken for SMP, and is not
universally honored by drivers that send data directly to the line
discipline receive_buf function.

Because TTY_DONT_FLIP is not necessary, is broken in implementation, and is
not universally honored, it is removed.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28 14:59:05 -07:00
Greg Kroah-Hartman 331b831983 [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
I've always found this flag confusing.  Now that devfs is no longer around, it
has been renamed, and the documentation for when this flag should be used has
been updated.

Also fixes all drivers that use this flag.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:09 -07:00
Greg Kroah-Hartman f4eaa37017 [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
Also fixes all drivers that set this field.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:09 -07:00
Eric Sesterhenn cdee5751bf [BLUETOOTH] sco: Possible double free.
this fixes coverity bug id #1068.
hci_send_sco() frees skb if (skb->len > hdev->sco_mtu).
Since it returns a negative error value only in this case, we
can directly return here.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:29 -07:00
Alan Stern e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Davide Libenzi f348d70a32 [PATCH] POLLRDHUP/EPOLLRDHUP handling for half-closed devices notifications
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets.  Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense.  The same thing was discussed and conceptually
agreed quite some time ago:

http://lkml.org/lkml/2003/7/12/116

Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it.  As far
as the existing POLLHUP handling, the patch leaves it as is.  The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files.  The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.

There is "a stupid program" to test POLLRDHUP delivery here:

 http://www.xmailserver.org/pollrdhup-test.c

It tests poll(2), but since the delivery is same epoll(2) will work equally.

Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 08:22:56 -08:00
Tobias Klauser 67b52e554b [BLUETOOTH]: Return negative error constant
Return negative error constant.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 23:53:16 -08:00
Arjan van de Ven 4a3e2f711a [NET] sem2mutex: net/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:33:17 -08:00
Marcel Holtmann 7b005bd34c [Bluetooth] Fix NULL pointer dereferences of the HCI socket
This patch fixes the two NULL pointer dereferences found by the sfuzz
tool from Ilja van Sprundel. The first one was a call of getsockname()
for an unbound socket and the second was calling accept() while this
operation isn't implemented for the HCI socket interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-02-13 11:40:03 +01:00
Marcel Holtmann 56f3a40a5e [Bluetooth] Reduce L2CAP MTU for RFCOMM connections
This patch reduces the default L2CAP MTU for all RFCOMM connections
from 1024 to 1013 to improve the interoperability with some broken
RFCOMM implementations. To make this more flexible the L2CAP MTU
becomes also a module parameter and so it can changed at runtime.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-02-13 11:39:57 +01:00
Randy Dunlap 4fc268d24c [PATCH] capable/capability.h (net/)
net: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:14 -08:00
Jesper Juhl 12fe2c588d [NET]: Remove unneeded kmalloc() return value casts
Get rid of needless casting of kmalloc() return value in net/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-10 13:08:21 -08:00
Kris Katterjohn d3f4a687f6 [NET]: Change memcmp(,,ETH_ALEN) to compare_ether_addr()
This changes some memcmp(one,two,ETH_ALEN) to compare_ether_addr(one,two).

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-10 12:54:28 -08:00
Alan Cox 33f0f88f1c [PATCH] TTY layer buffering revamp
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00
Linus Torvalds db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Kay Sievers 312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Eric Dumazet 90ddc4f047 [NET]: move struct proto_ops to const
I noticed that some of 'struct proto_ops' used in the kernel may share
a cache line used by locks or other heavily modified data. (default
linker alignement is 32 bytes, and L1_CACHE_LINE is 64 or 128 at
least)

This patch makes sure a 'struct proto_ops' can be declared as const,
so that all cpus can share all parts of it without false sharing.

This is not mandatory : a driver can still use a read/write structure
if it needs to (and eventually a __read_mostly)

I made a global stubstitute to change all existing occurences to make
them const.

This should reduce the possibility of false sharing on SMP, and
speedup some socket system calls.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:15 -08:00
Benjamin LaHaise c1cbe4b7ad [NET]: Avoid atomic xchg() for non-error case
It also looks like there were 2 places where the test on sk_err was
missing from the event wait logic (in sk_stream_wait_connect and
sk_stream_wait_memory), while the rest of the sock_error() users look
to be doing the right thing.  This version of the patch fixes those,
and cleans up a few places that were testing ->sk_err directly.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:10:44 -08:00
Marcel Holtmann be9d122730 [Bluetooth]: Remove the usage of /proc completely
This patch removes all relics of the /proc usage from the Bluetooth
subsystem core and its upper layers. All the previous information are
now available via /sys/class/bluetooth through appropriate functions.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 09:57:38 -08:00
Marcel Holtmann 1ebb92521d [Bluetooth]: Add endian annotations to the core
This patch adds the endian annotations to the Bluetooth core.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-08 09:57:21 -08:00
Jesper Juhl a51482bde2 [NET]: kfree cleanup
From: Jesper Juhl <jesper.juhl@gmail.com>

This is the net/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in net/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-11-08 09:41:34 -08:00
Al Viro a6e0eb3791 [PATCH] bluetooth hidp is broken on s390
Bluetooth HIDP selects INPUT and it really needs it to be there - module
depends on input core.  And input core is never built on s390...

Marked as broken on s390, for now; if somebody has better ideas, feel
free to fix it and remove dependency...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 10:35:08 -07:00
Linus Torvalds 84860bf064 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2005-10-28 13:09:47 -07:00
Marcel Holtmann dd7f5527b3 [Bluetooth] Update security filter for Extended Inquiry Response
This patch updates the HCI security filter with support for the Extended
Inquiry Response (EIR) feature.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:53 +02:00
Marcel Holtmann 6516455d3b [Bluetooth] Make more functions static
This patch makes another bunch of functions static.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:48 +02:00
Marcel Holtmann 408c1ce271 [Bluetooth] Move CRC table into RFCOMM core
This patch moves rfcomm_crc_table[] into the RFCOMM core, because there
is no need to keep it in a separate file.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28 19:20:36 +02:00
Dmitry Torokhov 34abf91f40 [PATCH] Input: convert net/bluetooth to dynamic input_dev allocation
Input: convert net/bluetooth to dynamic input_dev allocation

This is required for input_dev sysfs integration

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:54 -07:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Marcel Holtmann 354d28d5f8 [Bluetooth] Prevent RFCOMM connections through the RAW socket
This patch adds additional checks to prevent RFCOMM connections be
established through the RAW socket interface.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-09-13 01:32:31 +02:00
Marcel Holtmann 21d9e30ed0 [Bluetooth] Add support for extended inquiry responses
This patch adds the handling of the extended inquiry responses and
inserts them into the inquiry cache.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-09-13 01:32:25 +02:00
Patrick McHardy a61bbcf28a [NET]: Store skb->timestamp as offset to a base timestamp
Reduces skb size by 8 bytes on 64-bit.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:58:24 -07:00
Marcel Holtmann 0d48d93947 [Bluetooth]: Move packet type into the SKB control buffer
This patch moves the usage of packet type into the SKB control
buffer. After this patch it is now possible to shrink the sk_buff
structure and redefine its pkt_type.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:55:13 -07:00
Victor Fusco 2eb25a6c34 [Bluetooth]: Fix sparse warnings (__nocast type)
This patch fixes the sparse warnings "implicit cast to nocast type"
for the priority or gfp_mask parameters of the memory allocations.

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:55:07 -07:00
J. Suter 3a5e903c09 [Bluetooth]: Implement RFCOMM remote port negotiation
This patch implements the remote port negotiation (RPN) of the RFCOMM
protocol for Bluetooth.

Signed-off-by: J. Suter <jsuter@hardwave.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:55:03 -07:00
Timo Ters 7b9eb9e209 [Bluetooth]: Call tty_hangup() when DCD is de-asserted
The RFCOMM layer does not handle properly the de-assertation
of CD signal. It should call tty_hangup() to work properly.

Signed-off-by: Timo Ters <ext-timo.teras@nokia.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:54:58 -07:00
Marcel Holtmann 85a1e930bf [Bluetooth]: Track page scan repetition mode changes
The HCI page scan repetition mode change event contains the actual
page scan repetition mode for the remote device. It is the same
value that is received from an inquiry response and it can be used
to make further reconnections faster.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:54:53 -07:00
Marcel Holtmann 45bb4bf08b [Bluetooth]: Workaround for inquiry results with RSSI and page scan mode
This patch implements a workaround for buggy Bluetooth 1.2 devices from
Silicon Wave. Their inquiry results with RSSI contain the page scan mode
field. This field was removed in the final Bluetooth 1.2 specification.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:54:47 -07:00
Marcel Holtmann 576c7d858f [Bluetooth] Add direction and timestamp to stack internal events
This patch changes the direction to incoming and adds the timestamp
to all stack internal events.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 12:36:54 +02:00
Marcel Holtmann 66e8b6c31b [Bluetooth] Remove unused functions and cleanup symbol exports
This patch removes the unused bt_dump() function and it also removes
its BT_DMP macro. It also unexports the hci_dev_get(), hci_send_cmd()
and hci_si_event() functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 12:36:51 +02:00
Marcel Holtmann dcc365d8f2 [Bluetooth] Revert session reference counting fix
The fix for the reference counting problem of the signal DLC introduced
a race condition which leads to an oops. The reason for it is not fully
understood by now and so revert this fix, because the reference counting
problem is not crashing the RFCOMM layer and its appearance it rare.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 12:36:42 +02:00
David S. Miller b03efcfb21 [NET]: Transform skb_queue_len() binary tests into skb_queue_empty()
This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-08 14:57:23 -07:00
Al Viro b453257f05 [PATCH] kill gratitious includes of major.h under net/*
A lot of places in there are including major.h for no reason whatsoever.
Removed.  And yes, it still builds. 

The history of that stuff is often amusing.  E.g.  for net/core/sock.c
the story looks so, as far as I've been able to reconstruct it: we used
to need major.h in net/socket.c circa 1.1.early.  In 1.1.13 that need
had disappeared, along with register_chrdev(SOCKET_MAJOR, "socket",
&net_fops) in sock_init().  Include had not.  When 1.2 -> 1.3 reorg of
net/* had moved a lot of stuff from net/socket.c to net/core/sock.c,
this crap had followed... 

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 18:32:13 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00