The TDP MMU page fault handler will need to be able to create non-leaf
SPTEs to build up the paging structures. Rather than re-implementing the
function, factor the SPTE creation out of link_shadow_page.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20200925212302.3979661-9-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This should be const, so make it so.
Signed-off-by: Joe Perches <joe@perches.com>
Message-Id: <d130e88dd4c82a12d979da747cc0365c72c3ba15.1601770305.git.joe@perches.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add FSGSBASE to the set of possible guest-owned CR4 bits, i.e. let the
guest own it on VMX. KVM never queries the guest's CR4.FSGSBASE value,
thus there is no reason to force VM-Exit on FSGSBASE being toggled.
Note, because FSGSBASE is conditionally available, this is dependent on
recent changes to intercept reserved CR4 bits and to update the CR4
guest/host mask in response to guest CPUID changes.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
[sean: added justification in changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intercept CR4 bits that are guest reserved so that KVM correctly injects
a #GP fault if the guest attempts to set a reserved bit. If a feature
is supported by the CPU but is not exposed to the guest, and its
associated CR4 bit is not intercepted by KVM by default, then KVM will
fail to inject a #GP if the guest sets the CR4 bit without triggering
an exit, e.g. by toggling only the bit in question.
Note, KVM doesn't give the guest direct access to any CR4 bits that are
also dependent on guest CPUID. Yet.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that vcpu_after_set_cpuid() and update_exception_bitmap() are called
back-to-back, subsume the exception bitmap update into the common CPUID
update. Drop the SVM invocation entirely as SVM's exception bitmap
doesn't vary with respect to guest CPUID.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the call to kvm_x86_ops.vcpu_after_set_cpuid() to the very end of
kvm_vcpu_after_set_cpuid() to allow the vendor implementation to react
to changes made by the common code. In the near future, this will be
used by VMX to update its CR4 guest/host masks to account for reserved
bits. In the long term, SGX support will update the allowed XCR0 mask
for enclaves based on the vCPU's allowed XCR0.
vcpu_after_set_cpuid() (nee kvm_update_cpuid()) was originally added by
commit 2acf923e38 ("KVM: VMX: Enable XSAVE/XRSTOR for guest"), and was
called separately after kvm_x86_ops.vcpu_after_set_cpuid() (nee
kvm_x86_ops->cpuid_update()). There is no indication that the placement
of the common code updates after the vendor updates was anything more
than a "new function at the end" decision.
Inspection of the current code reveals no dependency on kvm_x86_ops'
vcpu_after_set_cpuid() in kvm_vcpu_after_set_cpuid() or any of its
helpers. The bulk of the common code depends only on the guest's CPUID
configuration, kvm_mmu_reset_context() does not consume dynamic vendor
state, and there are no collisions between kvm_pmu_refresh() and VMX's
update of PT state.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unconditionally intercept changes to CR4.LA57 so that KVM correctly
injects a #GP fault if the guest attempts to set CR4.LA57 when it's
supported in hardware but not exposed to the guest.
Long term, KVM needs to properly handle CR4 bits that can be under guest
control but also may be reserved from the guest's perspective. But, KVM
currently sets the CR4 guest/host mask only during vCPU creation, and
reworking flows to change that will take a bit of elbow grease.
Even if/when generic support for intercepting reserved bits exists, it's
probably not worth letting the guest set CR4.LA57 directly. LA57 can't
be toggled while long mode is enabled, thus it's all but guaranteed to
be set once (maybe twice, e.g. by BIOS and kernel) during boot and never
touched again. On the flip side, letting the guest own CR4.LA57 may
incur extra VMREADs. In other words, this temporary "hack" is probably
also the right long term fix.
Fixes: fd8cb43373 ("KVM: MMU: Expose the LA57 feature to VM.")
Cc: stable@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
[sean: rewrote changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200930041659.28181-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function amd_ir_set_vcpu_affinity makes use of the parameter struct
amd_iommu_pi_data.prev_ga_tag to determine if it should delete struct
amd_iommu_pi_data from a list when not running in AVIC mode.
However, prev_ga_tag is initialized only when AVIC is enabled. The non-zero
uninitialized value can cause unintended code path, which ends up making
use of the struct vcpu_svm.ir_list and ir_list_lock without being
initialized (since they are intended only for the AVIC case).
This triggers NULL pointer dereference bug in the function vm_ir_list_del
with the following call trace:
svm_update_pi_irte+0x3c2/0x550 [kvm_amd]
? proc_create_single_data+0x41/0x50
kvm_arch_irq_bypass_add_producer+0x40/0x60 [kvm]
__connect+0x5f/0xb0 [irqbypass]
irq_bypass_register_producer+0xf8/0x120 [irqbypass]
vfio_msi_set_vector_signal+0x1de/0x2d0 [vfio_pci]
vfio_msi_set_block+0x77/0xe0 [vfio_pci]
vfio_pci_set_msi_trigger+0x25c/0x2f0 [vfio_pci]
vfio_pci_set_irqs_ioctl+0x88/0xb0 [vfio_pci]
vfio_pci_ioctl+0x2ea/0xed0 [vfio_pci]
? alloc_file_pseudo+0xa5/0x100
vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
? vfio_device_fops_unl_ioctl+0x26/0x30 [vfio]
__x64_sys_ioctl+0x96/0xd0
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Therefore, initialize prev_ga_tag to zero before use. This should be safe
because ga_tag value 0 is invalid (see function avic_vm_init).
Fixes: dfa20099e2 ("KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20201003232707.4662-1-suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way we don't waste memory on VMs which don't use nesting
virtualization even when the host enabled it for them.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to signal an error to the userspace, in case
the vendor code failed during handling of this msr. (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow the KVM to report such errors (e.g -ENOMEM)
to the userspace.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return 1 on errors that are caused by wrong guest behavior
(which will inject #GP to the guest)
And return a negative error value on issues that are
the kernel's fault (e.g -ENOMEM)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201001112954.6258-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These should be const, so make it so.
Signed-off-by: Joe Perches <joe@perches.com>
Message-Id: <ed95eef4f10fc1317b66936c05bc7dd8f943a6d5.1601770305.git.joe@perches.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As vcpu->arch.cpuid_entries is now allocated dynamically, the only
remaining use for KVM_MAX_CPUID_ENTRIES is to check KVM_SET_CPUID/
KVM_SET_CPUID2 input for sanity. Since it was reported that the
current limit (80) is insufficient for some CPUs, bump
KVM_MAX_CPUID_ENTRIES and use an arbitrary value '256' as the new
limit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current limit for guest CPUID leaves (KVM_MAX_CPUID_ENTRIES, 80)
is reported to be insufficient but before we bump it let's switch to
allocating vcpu->arch.cpuid_entries[] array dynamically. Currently,
'struct kvm_cpuid_entry2' is 40 bytes so vcpu->arch.cpuid_entries is
3200 bytes which accounts for 1/4 of the whole 'struct kvm_vcpu_arch'
but having it pre-allocated (for all vCPUs which we also pre-allocate)
gives us no real benefits.
Another plus of the dynamic allocation is that we now do kvm_check_cpuid()
check before we assign anything to vcpu->arch.cpuid_nent/cpuid_entries so
no changes are made in case the check fails.
Opportunistically remove unneeded 'out' labels from
kvm_vcpu_ioctl_set_cpuid()/kvm_vcpu_ioctl_set_cpuid2() and return
directly whenever possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
As a preparatory step to allocating vcpu->arch.cpuid_entries dynamically
make kvm_check_cpuid() check work with an arbitrary 'struct kvm_cpuid_entry2'
array.
Currently, when kvm_check_cpuid() fails we reset vcpu->arch.cpuid_nent to
0 and this is kind of weird, i.e. one would expect CPUIDs to remain
unchanged when KVM_SET_CPUID[2] call fails.
No functional change intended. It would've been possible to move the updated
kvm_check_cpuid() in kvm_vcpu_ioctl_set_cpuid2() and check the supplied
input before we start updating vcpu->arch.cpuid_entries/nent but we
can't do the same in kvm_vcpu_ioctl_set_cpuid() as we'll have to copy
'struct kvm_cpuid_entry' entries first. The change will be made when
vcpu->arch.cpuid_entries[] array becomes allocated dynamically.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201001130541.1398392-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I0c6355b09fedf8f9cc4cc5f51be418e2c1c82b7b
Message-Id: <20200818152429.1923996-5-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM unconditionally provides PV features to the guest, regardless of the
configured CPUID. An unwitting guest that doesn't check
KVM_CPUID_FEATURES before use could access paravirt features that
userspace did not intend to provide. Fix this by checking the guest's
CPUID before performing any paravirtual operations.
Introduce a capability, KVM_CAP_ENFORCE_PV_FEATURE_CPUID, to gate the
aforementioned enforcement. Migrating a VM from a host w/o this patch to
a host with this patch could silently change the ABI exposed to the
guest, warranting that we default to the old behavior and opt-in for
the new one.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I202a0926f65035b872bfe8ad15307c026de59a98
Message-Id: <20200818152429.1923996-4-oupton@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Small change to avoid meaningless duplication in the subsequent patch.
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I77ab9cdad239790766b7a49d5cbae5e57a3005ea
Message-Id: <20200818152429.1923996-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functional change intended.
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Change-Id: I7cbe71069db98d1ded612fd2ef088b70e7618426
Message-Id: <20200818152429.1923996-2-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM was switched to interrupt-based mechanism for 'page ready' event
delivery in Linux-5.8 (see commit 2635b5c4a0 ("KVM: x86: interrupt based
APF 'page ready' event delivery")) and #PF (ab)use for 'page ready' event
delivery was removed. Linux guest switched to this new mechanism
exclusively in 5.9 (see commit b1d405751c ("KVM: x86: Switch KVM guest to
using interrupts for page ready APF delivery")) so it is not possible to
get #PF for a 'page ready' event even when the guest is running on top
of an older KVM (APF mechanism won't be enabled). Update the comment in
exc_page_fault() to reflect the new reality.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201002154313.1505327-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let KVM_WERROR depend on KVM, so it doesn't show in menuconfig alone.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Message-Id: <20201001112014.9561-1-mcroce@linux.microsoft.com>
Fixes: 4f337faf1c ("KVM: allow disabling -Werror")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allowing userspace to intercept reads to x2APIC MSRs when APICV is
fully enabled for the guest simply can't work. But more in general,
the LAPIC could be set to in-kernel after the MSR filter is setup
and allowing accesses by userspace would be very confusing.
We could in principle allow userspace to intercept reads and writes to TPR,
and writes to EOI and SELF_IPI, but while that could be made it work, it
would still be silly.
Cc: Alexander Graf <graf@amazon.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework the resetting of the MSR bitmap for x2APIC MSRs to ignore userspace
filtering. Allowing userspace to intercept reads to x2APIC MSRs when
APICV is fully enabled for the guest simply can't work; the LAPIC and thus
virtual APIC is in-kernel and cannot be directly accessed by userspace.
To keep things simple we will in fact forbid intercepting x2APIC MSRs
altogether, independent of the default_allow setting.
Cc: Alexander Graf <graf@amazon.com>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-3-sean.j.christopherson@intel.com>
[Modified to operate even if APICv is disabled, adjust documentation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
-----BEGIN PGP SIGNATURE-----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=mjUF
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.10
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
Fix an inverted flag for intercepting x2APIC MSRs and intercept writes
by default, even when APICV is enabled.
Fixes: 3eb900173c ("KVM: x86: VMX: Prevent MSR passthrough when MSR access is denied")
Co-developed-by: Peter Xu <peterx@redhat.com>
[sean: added changelog]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20201005195532.8674-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl91qtQPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD2eoQAKEpLbbWycXVKikz+O1yev8EELmWMpvV/7uM
Q+4+FjO2swcb5FEPBw6hicZKXIFRi7AP3xFp6hKuWyLfdnYST+WOf5KCI1DcDdG+
/+5bpiS9F1Z+K9Inm6XwpXCnWFuo1P8i1T65mT5HKIm/9+zRwFY5X8svXXvnP4h1
OVgDSI+8jn14yf9aMnvznmvAiSN9GXiVt4v3h9W/1B5FWw3sUT1bTdFIwjh4q7M5
Q32fLeWYdLqTnFOaYtLJNRElE9JSUFkwNpSg1nqoFUH+8gK5oBEEnhzdPzJ9figz
tXrMKlWylswX3ySHSe1L2m9hekwwF3p/h3r4QlpbR2feI8jhOG9mG1YNvPSCdgKh
xWDXWLUnymw4EZGyREeFdMe26gg4xVKqNnVB7Na3PFOSQklg6oqdcUyQccgyWd/6
i8ePA+djVFA/C+iVanv/xphAalT0DmNEe3isBSxkt0RZcrLoCDBoOsTRTRQv8d+y
xBwl3k/DAfGtYjJwntxUNjuQUOzn9E3cc/L/z4Y0ON+sYGzDbv9cPU2oMNyrqFTj
/AZVumCxz3gjjBah62iu7m0hkXIrh7H86ua/dAn/CC0dtAAcANQn+2373C02IPN9
ntCEjc+8aMdw4yph31Ngxd/IT6CQxCOpVJd++kzP5BpLvysUsUGy1M/3Hsd1c88v
hKWU5aS4
=YFeP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a change in the MMU notifier sequence number forces user_mem_abort()
to return early when attempting to handle a stage-2 fault, we return
uninitialised stack to kvm_handle_guest_abort(), which could potentially
result in the injection of an external abort into the guest or a spurious
return to userspace. Neither or these are what we want to do.
Initialise 'ret' to 0 in user_mem_abort() so that bailing due to a
change in the MMU notrifier sequence number is treated as though the
fault was handled.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20200930102442.16142-1-will@kernel.org
Alex pointed out that we don't pass a level hint to the TLBI instruction
when handling a stage-2 permission fault, even though the walker does
at some point have the level information in its hands.
Rework stage2_update_leaf_attrs() so that it can optionally return the
level of the updated pte to its caller, which can in turn be used to
provide the correct TLBI level hint.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/595cc73e-636e-8b3a-f93a-b4e9fb218db8@arm.com
Link: https://lore.kernel.org/r/20200930131801.16889-1-will@kernel.org
As warned with make htmldocs:
.../Documentation/virt/kvm/devices/vcpu.rst:70: WARNING: Malformed table.
Text in column margin in table line 2.
======= ======================================================
-ENODEV: PMUv3 not supported or GIC not initialized
-ENXIO: PMUv3 not properly configured or in-kernel irqchip not
configured as required prior to calling this attribute
-EBUSY: PMUv3 already initialized
-EINVAL: Invalid filter range
======= ======================================================
The ':' character for two lines are above the size of the column.
Besides that, other tables at the file doesn't use ':', so
just drop them.
While here, also fix this warning also introduced at the same patch:
.../Documentation/virt/kvm/devices/vcpu.rst:88: WARNING: Block quote ends without a blank line; unexpected unindent.
By marking the C code as a literal block.
Fixes: 8be86a5eec ("KVM: arm64: Document PMU filtering API")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/b5385dd0213f1f070667925bf7a807bf5270ba78.1601616399.git.mchehab+huawei@kernel.org
Commit a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes: a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
With all nVHE per-CPU variables being part of the hyp per-CPU region,
mapping them individual is not necessary any longer. They are mapped to hyp
as part of the overall per-CPU region.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-11-dbrazdil@google.com
Add hyp percpu section to linker script and rename the corresponding ELF
sections of hyp/nvhe object files. This moves all nVHE-specific percpu
variables to the new hyp percpu section.
Allocate sufficient amount of memory for all percpu hyp regions at global KVM
init time and create corresponding hyp mappings.
The base addresses of hyp percpu regions are kept in a dynamically allocated
array in the kernel.
Add NULL checks in PMU event-reset code as it may run before KVM memory is
initialized.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-10-dbrazdil@google.com
Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com
Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.
Done in preparation for separating percpu memory owned by kernel
proper and nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com
Defining a per-CPU variable in hyp/nvhe will result in its name being
prefixed with __kvm_nvhe_. Add helpers for declaring these variables
in kernel proper and accessing them with this_cpu_ptr and per_cpu_ptr.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-7-dbrazdil@google.com
The hyp_adr/ldr_this_cpu helpers were introduced for use in hyp code
because they always needed to use TPIDR_EL2 for base, while
adr/ldr_this_cpu from kernel proper would select between TPIDR_EL2 and
_EL1 based on VHE/nVHE.
Simplify this now that the hyp mode case can be handled using the
__KVM_VHE/NVHE_HYPERVISOR__ macros.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-6-dbrazdil@google.com
this_cpu_ptr is meant for use in kernel proper because it selects between
TPIDR_EL1/2 based on nVHE/VHE. __hyp_this_cpu_ptr was used in hyp to always
select TPIDR_EL2. Unify all users behind this_cpu_ptr and friends by
selecting _EL2 register under __KVM_NVHE_HYPERVISOR__. VHE continues
selecting the register using alternatives.
Under CONFIG_DEBUG_PREEMPT, the kernel helpers perform a preemption check
which is omitted by the hyp helpers. Preserve the behavior for nVHE by
overriding the corresponding macros under __KVM_NVHE_HYPERVISOR__. Extend
the checks into VHE hyp code.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-5-dbrazdil@google.com
Minor cleanup that only creates __kvm_ex_table ELF section and
related symbols if CONFIG_KVM is enabled. Also useful as more
hyp-specific sections will be added.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-4-dbrazdil@google.com
Minor cleanup to move all macros related to prefixing nVHE hyp section
and symbol names into one place: hyp_image.h.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-3-dbrazdil@google.com
Relying on objcopy to prefix the ELF section names of the nVHE hyp code
is brittle and prevents us from using wildcards to match specific
section names.
Improve the build rules by partially linking all '.nvhe.o' files and
prefixing their ELF section names using a linker script. Continue using
objcopy for prefixing ELF symbol names.
One immediate advantage of this approach is that all subsections
matching a pattern can be merged into a single prefixed section, eg.
.text and .text.* can be linked into a single '.hyp.text'. This removes
the need for -fno-reorder-functions on GCC and will be useful in the
future too: LTO builds use .text subsections, compilers routinely
generate .rodata subsections, etc.
Partially linking all hyp code into a single object file also makes it
easier to analyze.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-2-dbrazdil@google.com
The PR_SPEC_DISABLE_NOEXEC option to the PR_SPEC_STORE_BYPASS prctl()
allows the SSB mitigation to be enabled only until the next execve(),
at which point the state will revert back to PR_SPEC_ENABLE and the
mitigation will be disabled.
Add support for PR_SPEC_DISABLE_NOEXEC on arm64.
Reported-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
The kbuild robot reports that we're relying on an implicit inclusion to
get a definition of task_stack_page() in the Spectre-v4 mitigation code,
which is not always in place for some configurations:
| arch/arm64/kernel/proton-pack.c:329:2: error: implicit declaration of function 'task_stack_page' [-Werror,-Wimplicit-function-declaration]
| task_pt_regs(task)->pstate |= val;
| ^
| arch/arm64/include/asm/processor.h:268:36: note: expanded from macro 'task_pt_regs'
| ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
| ^
| arch/arm64/kernel/proton-pack.c:329:2: note: did you mean 'task_spread_page'?
Add the missing include to fix the build error.
Fixes: a44acf477220 ("arm64: Move SSBD prctl() handler alongside other spectre mitigation code")
Reported-by: Anthony Steinhauser <asteinhauser@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009260013.Ul7AD29w%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Patching the EL2 exception vectors is integral to the Spectre-v2
workaround, where it can be necessary to execute CPU-specific sequences
to nobble the branch predictor before running the hypervisor text proper.
Remove the dependency on CONFIG_RANDOMIZE_BASE and allow the EL2 vectors
to be patched even when KASLR is not enabled.
Fixes: 7a132017e7a5 ("KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202009221053.Jv1XsQUZ%lkp@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Ben Gardon