Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.c:59:5: warning: no previous prototype for ‘psb_gem_create’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-33-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.h:13:57: warning: ‘struct drm_device’ declared inside parameter list will not be visible outside of this definition or declaration
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-32-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_modes.c:17: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_probe'
drivers/gpu/drm/gma500/psb_intel_modes.c:51: warning: Function parameter or member 'adapter' not described in 'psb_intel_ddc_get_modes'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-31-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_lvds.c:635: warning: Function parameter or member 'mode_dev' not described in 'psb_intel_lvds_init'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-26-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/psb_intel_display.c:79: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-25-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gma_device.c:10:6: warning: no previous prototype for ‘gma_get_core_freq’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-23-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'crtc' not described in 'gma_pipe_has_type'
drivers/gpu/drm/gma500/gma_display.c:27: warning: Function parameter or member 'type' not described in 'gma_pipe_has_type'
drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'crtc' not described in 'gma_crtc_dpms'
drivers/gpu/drm/gma500/gma_display.c:190: warning: Function parameter or member 'mode' not described in 'gma_crtc_dpms'
drivers/gpu/drm/gma500/gma_display.c:573: warning: Function parameter or member 'crtc' not described in 'gma_crtc_save'
drivers/gpu/drm/gma500/gma_display.c:616: warning: Function parameter or member 'crtc' not described in 'gma_crtc_restore'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-22-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/power.c:101: warning: Function parameter or member 'pdev' not described in 'gma_resume_display'
drivers/gpu/drm/gma500/power.c:155: warning: Function parameter or member 'pdev' not described in 'gma_resume_pci'
drivers/gpu/drm/gma500/power.c:155: warning: Excess function parameter 'dev' description in 'gma_resume_pci'
drivers/gpu/drm/gma500/power.c:189: warning: Function parameter or member '_dev' not described in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'pdev' description in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:189: warning: Excess function parameter 'state' description in 'gma_power_suspend'
drivers/gpu/drm/gma500/power.c:216: warning: Function parameter or member '_dev' not described in 'gma_power_resume'
drivers/gpu/drm/gma500/power.c:216: warning: Excess function parameter 'pdev' description in 'gma_power_resume'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Benjamin Defnet <benjamin.r.defnet@intel.com>
Cc: Rajesh Poornachandran <rajesh.poornachandran@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-20-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/mmu.c:316:20: warning: no previous prototype for ‘psb_mmu_pt_alloc_map_lock’ [-Wmissing-prototypes]
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-19-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/intel_i2c.c:108: warning: Excess function parameter 'output' description in 'psb_intel_i2c_create'
drivers/gpu/drm/gma500/intel_i2c.c:153: warning: Function parameter or member 'chan' not described in 'psb_intel_i2c_destroy'
drivers/gpu/drm/gma500/intel_i2c.c:153: warning: Excess function parameter 'output' description in 'psb_intel_i2c_destroy'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-18-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/intel_bios.c:581: warning: Function parameter or member 'dev' not described in 'psb_intel_destroy_bios'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-17-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/gem.c:57:5: warning: no previous prototype for ‘psb_gem_create’ [-Wmissing-prototypes]
drivers/gpu/drm/gma500/gem.c:59: warning: Function parameter or member 'stolen' not described in 'psb_gem_create'
drivers/gpu/drm/gma500/gem.c:59: warning: Function parameter or member 'align' not described in 'psb_gem_create'
drivers/gpu/drm/gma500/gem.c:110: warning: Function parameter or member 'file' not described in 'psb_gem_dumb_create'
drivers/gpu/drm/gma500/gem.c:110: warning: Excess function parameter 'drm_file' description in 'psb_gem_dumb_create'
drivers/gpu/drm/gma500/gem.c:135: warning: Excess function parameter 'vma' description in 'psb_gem_fault'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-16-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/gma500/framebuffer.c:171: warning: Function parameter or member 'obj' not described in 'psb_framebuffer_init'
drivers/gpu/drm/gma500/framebuffer.c:171: warning: Excess function parameter 'gt' description in 'psb_framebuffer_init'
drivers/gpu/drm/gma500/framebuffer.c:212: warning: Function parameter or member 'obj' not described in 'psb_framebuffer_create'
drivers/gpu/drm/gma500/framebuffer.c:212: warning: Excess function parameter 'gt' description in 'psb_framebuffer_create'
drivers/gpu/drm/gma500/framebuffer.c:262: warning: Function parameter or member 'fb_helper' not described in 'psbfb_create'
drivers/gpu/drm/gma500/framebuffer.c:262: warning: Excess function parameter 'fbdev' description in 'psbfb_create'
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-15-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mga/mga_ioc32.c:171: warning: Function parameter or member 'filp' not described in 'mga_compat_ioctl'
drivers/gpu/drm/mga/mga_ioc32.c:171: warning: Function parameter or member 'cmd' not described in 'mga_compat_ioctl'
drivers/gpu/drm/mga/mga_ioc32.c:171: warning: Function parameter or member 'arg' not described in 'mga_compat_ioctl'
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-7-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/r128/r128_ioc32.c:182: warning: Function parameter or member 'filp' not described in 'r128_compat_ioctl'
drivers/gpu/drm/r128/r128_ioc32.c:182: warning: Function parameter or member 'cmd' not described in 'r128_compat_ioctl'
drivers/gpu/drm/r128/r128_ioc32.c:182: warning: Function parameter or member 'arg' not described in 'r128_compat_ioctl'
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181313.3431493-6-lee.jones@linaro.org
We have too many people abusing the struct page they can get at but
really shouldn't in importers. Aside from that the backing page might
simply not exist (for dynamic p2p mappings) looking at it and using it
e.g. for mmap can also wreak the page handling of the exporter
completely. Importers really must go through the proper interface like
dma_buf_mmap for everything.
I'm semi-tempted to enforce this for dynamic importers since those
really have no excuse at all to break the rules.
Unfortuantely we can't store the right pointers somewhere safe to make
sure we oops on something recognizable, so best is to just wrangle
them a bit by flipping all the bits. At least on x86 kernel addresses
have all their high bits sets and the struct page array is fairly low
in the kernel mapping, so flipping all the bits gives us a very high
pointer in userspace and hence excellent chances for an invalid
dereference.
v2: Add a note to the @map_dma_buf hook that exporters shouldn't do
fancy caching tricks, which would blow up with this address scrambling
trick here (Chris)
Enable by default when CONFIG_DMA_API_DEBUG is enabled.
v3: Only one copy of the mangle/unmangle code (Christian)
v4: #ifdef, not #if (0day)
v5: sg_table can also be an ERR_PTR (Chris, Christian)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210115164739.3958206-1-daniel.vetter@ffwll.ch
ttm_resource_manager->use_type is only used for runtime changes by
vmwgfx. I think ideally we'd push this functionality into drivers -
ttm itself does not provide any locking to guarantee this is safe, so
the only way this can work at runtime is if the driver does provide
additional guarantees. vwmgfx does that through the
vmw_private->reservation_sem. Therefore supporting this feature in
shared code feels a bit misplaced.
As a first step add a WARN_ON to make sure the resource manager is
empty. This is just to make sure I actually understand correctly what
vmwgfx is doing, and to make sure an eventual subsequent refactor
doesn't break anything.
This check should also be useful for other drivers, to make sure they
haven't leaked anything.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211162942.3399050-3-daniel.vetter@ffwll.ch
Other way round is a bit inconsistent (but not buggy in any kind).
This is prep work so that ttm_resource_manager_set_used can assert
that the resource manager is empty.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211162942.3399050-2-daniel.vetter@ffwll.ch
This isn't actually protecting anything becuase:
- when running, ttm_resource_manager->use_type is protected through
vmw_private->reservation_semaphore against concurrent execbuf or
well anything else that might evict or reserve buffers
- during suspend/resume there's nothing else running, hence
vmw_pm_freeze and vmw_pm_restore do not need to take the same lock.
- this also holds for the SVGA_REG_ENABLE register write
Hence it is safe to just remove that spinlock.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211162942.3399050-1-daniel.vetter@ffwll.ch
The GEM mmap code relies on the GEM object's mmap callback to set the
VMA's vm_ops field. This is easily forgotten and already led to a memory
leak in the CMA helpers. Instead set the vm_ops field in the DRM core
code to the GEM object's value. Drivers with different needs can override
this in their mmap callback.
v2:
* support (vm_ops == NULL) if mmap is given; required by VRAM
helpers
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: f5ca8eb6f9 ("drm/cma-helper: Implement mmap as GEM CMA object functions")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210115093038.10345-1-tzimmermann@suse.de
Currently the kmalloc allocation for config is not being null
checked and could potentially lead to a null pointer dereference.
Fix this by adding the missing null check.
Addresses-Coverity: ("Dereference null return value")
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115130911.71073-1-colin.king@canonical.com
Remove unused space_needed variable.
Fixes: 453f617a30 ("drm/amdgpu: Resize BAR0 to the maximum available size, even if it doesn't cover VRAM")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/413807/
The function vc4_prime_import_sg_table() is an otherwise empty wrapper
around CMA's drm_gem_cma_prime_import_sg_table(). Removing it in favor
of the latter allows to initialize vc4_drm_driver with CMA's initializer
macro.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114084949.29014-1-tzimmermann@suse.de
The file is not in use. It got re-added by a rebased patch. Removing
it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4d4dad21cc ("drm/hibmc: Remove references to struct drm_device.pdev")
Reviewed-by: Tian Tao <tiantao6@hisilicon.com>
Reported-by: Tian Tao <tiantao6@hisilicon.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gong junjie <gongjunjie2@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113113107.12005-1-tzimmermann@suse.de
The new >8k CEA modes have dotclocks reaching 5.94 GHz, which
means our clock*1000 will now overflow the 32bit unsigned
integer. Switch to 64bit maths to avoid it.
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022194256.30978-1-ville.syrjala@linux.intel.com
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We can't be setting the display_id register to an invalid value
because that makes our device reset the fb which causes nasty
flicker (due to destruction and creation of a new fb).
Also we can't be using the BITS_PER_PIXEL register if the
8BIT_EMULATION is not supported.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414041/?series=85516&rev=2
Lets try to cleanup the usage of the term FIFO which we used for
both our MMIO based cmd queue processing and for general
command processing which could have been using command buffers
interface. We're going to rename the functions which are processing
commands (and work either via MMIO or command buffers) as _cmd_
and functions which operate on the MMIO based commands as FIFO
to match the SVGA device naming.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414044/?series=85516&rev=2
Throttling was used before fencing to implement early vsync
support in the xorg state tracker a long time ago. The xorg
state tracker has been removed years ago and no one else
has ever used throttling. It's time to remove this code,
it hasn't been used or tested in years.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414042/?series=85516&rev=2
Instead of doing it in multiple spots lets centralize the code
to handle pci resources. This also cleans up the error
handling a bit and will make it a lot easier to add additional
svga versions to the driver.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414040/?series=85516&rev=2
Going forward the svga device might reuse mmio for general
register accesses, in order to prepare for that we need to
cleanup our naming and handling of fifo specific mmio reads
and writes. As part of this work lets switch to managed
mapping of the fifo mmio to make the error handling cleaner.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414045/?series=85516&rev=2
To cleanup some of the error handling and prepare for some
other work lets switch to a managed drm device. It will
let us get a better handle on some of the error paths.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414039/?series=85516&rev=2
Before drm got helpers for removing conflicting pci framebuffer devices
we implemented something known as "stealth" mode which allowed vmwgfx
to run even if it couldn't reserve pci resources. We can just switch
to regular drm helpers instead of keeping the stealth mode alive as
it makes our code a lot cleaner.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/414043/?series=85516&rev=2
A function has a different name between their prototype
and its kernel-doc markup:
../include/drm/drm_crtc.h:1257: warning: expecting prototype for drm_crtc_alloc_with_planes(). Prototype was for drmm_crtc_alloc_with_planes() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/2439fb6713e9b2aa27a81f3269a4b0e8e7dfcd36.1610610937.git.mchehab+huawei@kernel.org
During commit 88bc417856 ("drm: Use new
DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags") DRM_BUS_FLAG_*
macros have been changed to avoid ambiguity but just because of this
ambiguity previous DRM_BUS_FLAG_PIXDATA_(POS/NEG)EDGE were used meaning
_SAMPLE_ not _DRIVE_. This leads to DLCK inversion and need to fix but
instead of swapping phase values, let's adopt an easier approach Maxime
suggested:
It turned out that bit 26 of SUN4I_TCON0_IO_POL_REG is dedicated to
invert DCLK polarity and this makes things really easier than before. So
let's handle DCLK polarity by adding SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE
as bit 26 and activating according to bus_flags the same way it is done
for all the other signals polarity.
Fixes: 88bc417856 ("drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags")
Suggested-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114081732.9386-1-giulio.benetti@benettiengineering.com
Fix the following errors:
divers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c:
In function ‘hibmc_hw_map’:
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c:213:25:
error: ‘dev’ undeclared (first use in this function);
Fixes: 4d4dad21cc ("drm/hibmc: Remove references to struct drm_device.pdev")
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1610529568-25754-1-git-send-email-tiantao6@hisilicon.com
The function drm_need_swiotbl() needs mem_encrypt_active() from
<linux/mem_encrypt.h>. The include got lost when refactoring the
code recently.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3abc667063 ("drm: Implement drm_need_swiotlb() in drm_cache.c")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210114080535.17132-1-tzimmermann@suse.de
Devfreq framework supports 2 modes for monitoring devices.
Use delayed timer as default instead of deferrable timer
in order to monitor the GPU status regardless of CPU idle.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210105164111.30122-1-lukasz.luba@arm.com
The field is only relevant for legacy DRM drivers. Its only non-legacy
user in the DRM core is in drm_file.c. This code is now protected by
CONFIG_DRM_LEGACY. Radeon, the only driver that used the field, has been
changed to maintain it's own copy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-7-tzimmermann@suse.de
CONFIG_DRM_VM gets selected by CONFIG_DRM_LEGACY, but nothing else. So
remove it and build drm_vm.o as part of CONFIG_DRM_LEGACY.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-5-tzimmermann@suse.de
The function is declared in drm_cache.h. I also removed the curly
braces from the for loop to adhere to kernel coding style.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-3-tzimmermann@suse.de
The AGP wrapper functions serve no purpose. They used to handle
builds that have CONFIG_AGP unset. But their callers are all in
drm_agpsupport.c, which only gets build with CONFIG_AGP.
v2:
* clarify CONFIG_AGP in commit description (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112081035.6882-2-tzimmermann@suse.de
Moving vc4's mmap code from vc4_mmap() into a GEM object function
allows for the use drm_gem_mmap() and drm_gem_prime_mmap(). The content
of vc4_drm_fpos can then be generated by DEFINE_DRM_GEM_FOPS().
The actual mmap implementation is just a check if the BO is a validated
shader plus the default CMA mmap code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108140808.25775-4-tzimmermann@suse.de
Lee Jones