The SVC eject timeout is implementation specific and does not belong in
the protocol header so move it to the svc module.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Print an error message when the SVC fails to eject an interface.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Do no export the interface-eject helper, which is only supposed to be
used by core.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Separate interface disable from interface removal.
Disabling an interface means tearing down its control connection and
destroying (i.e. deregistering and releasing) its bundles, while
removing it means deregistering and releasing the interface itself.
This is needed to implement controlled module removal, where the module
interfaces are disabled before being physically ejected.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename the interface-initialisation function gb_interface_enable(),
which is more descriptive.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move helper to remove all interfaces of a host-device to the svc code
and call it when removing the svc device as this needs to be coordinated
with flushing the SVC work queue.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove useless global interface spinlock that appeared to protect the
host-device interface list, but really did not as we are doing lock-less
look-ups by relying on the single-threaded SVC workqueue.
Document the locking assumptions.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Disable the control connection immediately on any errors during
interface initialisation as there's no need to keep it around for an
interface in an error state.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Always register interfaces at hotplug regardless of whether
initialisation succeeded or not.
Even if a module failed to initialise we want it to have a
representation while it is physically present.
Note that the vendor and product-string attribute will read as "(null)"
for now on an interface that failed (early) initialisation.
Also note that the switch route is kept until the interface is finally
removed also on initialisation errors.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Separate interface initialisation from registration of the interface and
its bundles.
This is a step towards registering also interfaces that failed to
initialise (e.g. a dummy interface).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add interface-route-destroy helper to tear down the route and release
the interface device id.
Note that we currently need to grab a reference to the interface to
prevent it from being deallocated before tearing down the route.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add interface-route-create helper to allocate an interface device id and
setup the route.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add comment about why the control connection is disabled early when the
interface is already gone.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Remove the unused interface drvdata helpers along with some dubious
comments about public and private definitions.
Greybus drivers bind to bundles and should be using the
greybus_set_drvdata and greybus_get_drvdata helpers.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
loopback driver use the send_count variable to know the test progress.
The test may be stopped or change but this variable is never cleaned.
Such situation may break the next run.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The original round was removed becaused it was rounding
the integer whereas we had decimals.
Round the sixth decimal.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_loopback_ro_avg_attr() is using "/" to divide two 64-bit integer,
causing a reference to __aeabi_uldivmod() that is not availalbe on 32-bit.
Instead, use do_div().
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark the SVC Bundle-class id as unused.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark the AP Bundle-class and protocol ids as unused.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Patch "c3b0a32 Loopback_test: use poll instead of inotify"
added a optional argument for the user to specify a timeout value,
but did not use this parameter in the actual poll function. The
default of 30 seconds is always used.
Fix this by actually using the the poll_timeout parameter so the user
can run long tests.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
GPIO number obtained from of_get_named_gpio() should be signed to allow
error handling.
Testing Done:
Built & booted on EVT1.5
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A patch from created struct gb_control_timesync_enable_request,
but forgot to properly annotate that the fields are little-endian. The
code is correct in treating them this way, so there isn't a bug, but
sparse complains.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Following Toshiba's recommendation we shouldn't use E2EFC on a CSI connection.
Disable E2EFC on the CSI connection.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename the CPort-features callbacks, that are not just used to enable
FCT flow, to the more descriptive cport_features_enable/disable.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add CSD connection flag that can be specified when allocating a
connection to enable Controlled Segment Dropping in favour of E2EFC
which is enabled by default.
Note that most connections are expected to have E2EFC enabled.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.
Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Clean up CPortFlags handling and explicitly disable CSD when E2EFC is
enabled (CSD_n is ignored when E2EFC is set).
Note that the bootrom requires E2EFC, CSD, and CSV to all be disabled.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add interface for associating a flag bitmask with a connection when
creating it.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Simple addition of the TimeSync commands defined in the specification.
Note for the case of timesync_authoritative we're passing the request
structure directly so as not to have to pass eight parameters into the
function.
Adds:
- control.c::timesync_enable(u8 count, u64 frame_time,
u32 strobe_delay, u32 refclk)
Informs an Interface to expect count TimeSync strobe pulses with
strobe_delay milliseconds delay between each strobe. Once enabled
an Interface may not enter a low-power mode which will result in the
reference timer used to track time switching off.
- control.c::timesync_disable(void)
Commands an Interface to immediately halt TimeSync logic. This will allow
an Interface to transition into low-power modes where the reference time
being used for TimeSync may switch off.
- control.c::timesync_authoritative(u64 *frame_time, u8 count)
Used by the AP Module to inform an Interface of the authoritative
TimeSync clock-master time at each strobe pulse. Down-stream clock slaves
shall adjust their local frame-time appropriately based on the
diseminated authoritative frame-time.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the protocol command extenions for SVC and Control
protocols to the greybus_protocols definition header consistent with
the greybus-spec.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the protocol command/response definitions for the SVC and
Control protocols to the greybus_protocols definition header consistent
with the greybus-spec.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This reserves the bridged phy class number to be used later on.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Create gpbridge.h for the gpbridge-specific function prototypes, the
rest of the greybus drivers don't care about them.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Set retries operation was removed from the Greybus specification. Remove
gb_i2c_retries_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Set timeout operation was removed from the Greybus specification. Remove
gb_i2c_timeout_operation and all other no longer necessary code bits from the
Greybus kernel code.
Signed-off-by: Michael Mogenson <michael.mogenson@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use hexadecimal notation for request types in log messages.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Provide finer-grained control of the audio streaming on APB1 by
splitting the transmit/receive start and stop requests into prepare,
start, stop, and shutdown.
CC: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Inotify does not handle sysfs events, so use poll instead.
The loopback kernel driver will send a notification when the test is
complete. So, open a poll file descriptor for every enabled device,
and after starting the test, wait for an event from each device.
After all events are received, read the total number of iterations
and make sure the test is complete.
Also, add missing stdint header which was included in inotify.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.
Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.
Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
WARN_ON() is a bit harsh here, as we just failed to power-off the HID
device while it is getting removed.
Replace it with dev_err().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
hid_destroy_device() can potentially call callbacks defined in struct
hid_ll_driver, which may initiate few greybus operations.
And so connection (tx) should be kept enabled until the hid-device isn't
destroyed.
Reported-by: Jiss Kuruvila <jkuruvila@google.com>
Reported-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, it is assumed that all audio data CPorts registered on
APB1 are used for transmitting audio data. That may not always be
true like when a microphone is connected but no speakers. Also,
the current special protocol lacks a way to tell APB1 whether the CPort
being registered is for transmitting, receiving, or both.
Fix by adding a 'direction' field to the register and unregister CPort
requests and define bits indicating which direction (or both) audio
data will go on that CPort.
Signed-off-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now that userspace is ready for all 32 bits of the vid/pid, take off our
mask and send the full values.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Johan Hovold