Here are some small char and misc and other driver subsystem fixes for
5.9-rc3.
The majority of these are tiny habanalabs driver fixes, but also in here
are:
- speakup build fixes now that it is out of staging and got
exposed to more build systems all of a sudden
- mei driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX0Zmbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk7DwCg1v16Ow/27oZZN/z2Wu40vRo3pJIAoJqz2ay/
PsrcjZIO15cEarTy1kEq
=3RZb
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc and other driver subsystem fixes for
5.9-rc3.
The majority of these are tiny habanalabs driver fixes, but also in
here are:
- speakup build fixes now that it is out of staging and got exposed
to more build systems all of a sudden
- mei driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: correctly report inbound pci region cfg error
habanalabs: check correct vmalloc return code
habanalabs: validate FW file size
habanalabs: fix incorrect check on failed workqueue create
habanalabs: set max power according to card type
habanalabs: proper handling of alloc size in coresight
habanalabs: set clock gating according to mask
habanalabs: verify user input in cs_ioctl_signal_wait
habanalabs: Fix a loop in gaudi_extract_ecc_info()
habanalabs: Fix memory corruption in debugfs
habanalabs: validate packet id during CB parse
habanalabs: Validate user address before mapping
habanalabs: unmap PCI bars upon iATU failure
mei: hdcp: fix mei_hdcp_verify_mprime() input parameter
speakup: only build serialio when ISA is enabled
speakup: Fix wait_for_xmitr for ttyio case
During inbound iATU configuration we can get errors while
configuring PCI registers, there is a certain scenario in which these
errors are not reflected and driver is loaded with wrong configuration.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
vmalloc can return different return code than NULL and a valid
pointer. We must validate it in order to dereference a non valid
pointer.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We must validate FW size in order not to corrupt memory in case
a malicious FW file will be present in system.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The null check on a failed workqueue create is currently null checking
hdev->cq_wq rather than the pointer hdev->cq_wq[i] and so the test
will never be true on a failed workqueue create. Fix this by checking
hdev->cq_wq[i].
Addresses-Coverity: ("Dereference before null check")
Fixes: 5574cb2194 ("habanalabs: Assign each CQ with its own work queue")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi, the default max power setting is different between PCI and PMC
cards. Therefore, the driver need to set the default after knowing what is
the card type.
The current code has a bug where it limits the maximum power of the PMC
card to 200W after a reset occurs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allocation size can go up to 64bit but truncated to 32bit,
we should make sure it is not truncated and validate no address
overflow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Once clock gating is set we enable clock gating according to mask,
we should also disable clock gating according to relevant bits.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
User input must be validated before using it to
access internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The condition was reversed. It should have been less than instead of
greater than. The result is that we never enter the loop.
Fixes: fcc6a4e606 ("habanalabs: Extract ECC information from FW")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This has to be a long instead of a u32 because we write a long value.
On 64 bit systems, this will cause memory corruption.
Fixes: c216477363 ("habanalabs: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During command buffer parsing, driver extracts packet id
from user buffer. Driver must validate this packet id, since it is
being used in order to extract information from internal structures.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In case the driver fails to configure the PCI controller iATU, it needs to
unmap the PCI bars before exiting so if the driver is removed, the bars
won't be left mapped.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
wired_cmd_repeater_auth_stream_req_in has a variable
length array at the end. we use struct_size() overflow
macro to determine the size for the allocation and sending
size.
This also fixes bug in case number of streams is > 0 in the original
submission. This bug was not triggered as the number of streams is
always one.
Fixes: c56967d674 (mei: hdcp: Replace one-element array with flexible-array member)
Fixes: 0a1af1b5c1 (misc/mei/hdcp: Verify M_prime)
Cc: <stable@vger.kernel.org> # v5.1+: c56967d674 (mei: hdcp: Replace one-element array with flexible-array member)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200818075406.2532605-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
Merge misc updates from Andrew Morton:
- a few MM hotfixes
- kthread, tools, scripts, ntfs and ocfs2
- some of MM
Subsystems affected by this patch series: kthread, tools, scripts, ntfs,
ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan,
debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore,
sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
mm: vmscan: consistent update to pgrefill
mm/vmscan.c: fix typo
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: retract_page_tables() remember to test exit
khugepaged: collapse_pte_mapped_thp() protect the pmd lock
khugepaged: collapse_pte_mapped_thp() flush the right range
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
mm: thp: replace HTTP links with HTTPS ones
mm/page_alloc: fix memalloc_nocma_{save/restore} APIs
mm/page_alloc.c: skip setting nodemask when we are in interrupt
mm/page_alloc: fallbacks at most has 3 elements
mm/page_alloc: silence a KASAN false positive
mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask()
mm/page_alloc.c: simplify pageblock bitmap access
mm/page_alloc.c: extract the common part in pfn_to_bitidx()
mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits
mm/shuffle: remove dynamic reconfiguration
mm/memory_hotplug: document why shuffle_zone() is relevant
mm/page_alloc: remove nr_free_pagecache_pages()
mm: remove vm_total_pages
...
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl8tOxATHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgDQfEAClXHWf6hnxB84bEu39D51NkVotL1IG
BRWFvyix+xHuUkHIouBPAAMl6ngY5X6wkYd+Z+CY9zHNtdSDoVlJE30YXdMQA/dE
L/rYxR1884yGR/uU/3wusboO68ReXwcKQPmKOymUfh0zH7ujyJsSWLpXFK1YDC5d
2TVVTi0Q+P5ucMHDh0L+AHirIxZvtZSp43+J7xLtywsj+XAxJWCTGo5WCJbdgbCA
Qbv3aOkVyUa3EgsbdM/STPpv82ebqT+PHxeSIO4Jw6ZODtKRH0R5YsWCApuY9eZ+
ebY9RLmgv9ZAhJqB2fv9A5NDcMoGpZNmjM7HrWpXwULKQpkBGHCzJ9FcSdHVMOx8
nbVMFjt4uzLwV1w8lFYslQ2tNH/uH2o9BlryV1RLpiiKokDAJO/NOsWN9y0u/I4J
EmAM5DSX2LgVvvas96IlGK8KX4xkOkf8FLX/H5UDvvAfloH8J4CZXk/CWCab/nqY
KEHPnMmYvQZ1w9SzyZg9sO/1p6Bl1Gmm75Jv2F1lBiRW/42VcGBI/qLsJ4lC59Fc
KbwufYNYYG38wbxDLW1HAPJhRonxIcaZj3EEqk7aTiLZ55nNbu8e2k32CpNXTGqt
npOhzJHimcq7L6+878ZW+xpbZwogIEUdRSsmwb6aT8za3ShnYwSA2Q3LYxh9xyGH
j3GifvPq6Efp3Q==
=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
- Convert cadence to use standard "dma-ranges" DT property instead of its
own "cdns,no-bar-match-nbits" (Kishon Vijay Abraham I)
- Fix pm_runtime_put_sync() issues in cadence error paths (Kishon Vijay
Abraham I)
- Add PTR_ALIGN_DOWN macro (Kishon Vijay Abraham I)
- Convert cadence r/w accessors to only 32-bit accesses (Kishon Vijay
Abraham I)
- Add cadence support to start Link and check Link status (Kishon Vijay
Abraham I)
- Allow custom PCI ops for cadence-based drivers (Kishon Vijay Abraham I)
- Remove "mem" from cadence reg binding since it's not memory and it
overlaps the PCIe config and memory region (Kishon Vijay Abraham I)
- Add cadence ->cpu_addr_fixup() for platforms that require absolute
addresses in the ATU, not just offsets (Kishon Vijay Abraham I)
- Update cadence Vendor IDs using local management registers, not
architected config space (Kishon Vijay Abraham I)
- Add cadence endpoint driver MSI-X support (Kishon Vijay Abraham I)
- Add bindings and driver for TI J721E SoC, supporting both host and
endpoint mode (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/cadence:
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
PCI: cadence: Add MSI-X support to Endpoint driver
PCI: cadence: Fix updating Vendor ID and Subsystem Vendor ID register
PCI: cadence: Add new *ops* for CPU addr fixup
dt-bindings: PCI: cadence: Remove "mem" from reg binding
PCI: cadence: Allow pci_host_bridge to have custom pci_ops
PCI: cadence: Add support to start link and verify link status
PCI: cadence: Convert all r/w accessors to perform only 32-bit accesses
linux/kernel.h: Add PTR_ALIGN_DOWN macro
PCI: cadence: Fix cdns_pcie_{host|ep}_setup() error path
PCI: cadence: Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=90UK
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- make support for dma_ops optional
- move more code out of line
- add generic support for a dma_ops bypass mode
- misc cleanups
* tag 'dma-mapping-5.9' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: cleanup dma_alloc_contiguous
dma-debug: use named initializers for dir2name
powerpc: use the generic dma_ops_bypass mode
dma-mapping: add a dma_ops_bypass flag to struct device
dma-mapping: make support for dma ops optional
dma-mapping: inline the fast path dma-direct calls
dma-mapping: move the remaining DMA API calls out of line
Add J721E in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in J721E.
Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Gcc report warning as follows:
drivers/misc/habanalabs/common/command_submission.c:373:6: warning:
variable 'ctx_asid' set but not used [-Wunused-but-set-variable]
373 | int ctx_asid, rc;
| ^~~~~~~~
This variable is not used in function cs_timedout(), this commit
remove it to fix the warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200729155902.33976-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the mei device heads are not generic and have
a specific purpose, we need to announce it to the user space
so it is possible to detect the correct device node via
matching attributes.
Generic heads are marked as 'mei' while special purpose heads
have their own names. Currently we are adding 'itouch' string
for Intel IPTS 1.0, 2.0 devices.
This is done via new sysfs attribute 'kind'.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200728192242.3117779-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses warnings and errors from the kernel doc scripts for
the OpenCAPI driver.
It also makes minor tweaks to make the docs more consistent.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200415012343.919255-3-alastair@d-silva.org
There's no need to try to be cute with the include file locations in the
Makefile, so just specify exactly where the files are.
Bonus is this fixes the problem of building with O= as well as trying to
just build the subdirectory alone.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Ben Segal <bpsegal20@gmail.com>
Cc: Christine Gharzuzi <cgharzuzi@habana.ai>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Link: https://lore.kernel.org/r/20200728171851.55842-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having sync_core() in processor.h is problematic since it is not possible
to check for hardware capabilities via the *cpu_has() family of macros.
The latter needs the definitions in processor.h.
It also looks more intuitive to relocate the function to sync_core.h.
This changeset does not make changes in functionality.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20200727043132.15082-3-ricardo.neri-calderon@linux.intel.com
Add a missing free of the cs_pending array in the error flow of context
initialization.
Fixes: c16d45f42b ("habanalabs: Use pending CS amount per ASIC")
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
gaudi_mmu_invalidate_cache() doesn't use the flags parameter, and thus
it can be set to 0 when the function is called in the gaudi only files.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Device is now enabled before the hw_init() because part of the
initialization requires communication with the device firmware to get
information that is required for the initialization itself
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Create a device MMU-mapped internal command buffer pool, in order to allow
the driver to allocate CBs for the signal/wait operations
that are fetched by the queues when they are configured with the user's
address space ID.
We must pre-map this internal pool due to performance issues.
This pool is needed for future ASIC support and it is currently unused in
GOYA and GAUDI.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update the boot interface file from the latest version from firmware.
Defines for secure boot were added.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
For internal needs of our CI we need to move all the common code into a
common folder instead of putting them in the root folder of the driver.
Same applies to the common header files under include/
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
In GAUDI we use QMAN0 DMA for clearing the MMU memory region
at initialization. if this operation fails it places the DMA in an error
state and then when trying to initialize QMAN0 we fail and erroneously
assume its the QMAN that failed.
This commit adds a check and clear of such DMA errors at initialization so
we will have a better understanding of what went wrong.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In order for the user to be aware of wrong inputs, we must return
error in case the amount of jobs per cs exceeds the corresponding
queue size.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We identified a possible race during job completion when working
with a single multi-threaded work queue. In order to overcome this
race we suggest using a single threaded work queue per completion
queue, hence we guarantee jobs completion in order.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently the driver halts the device CPU in the halt engines function,
which halts all the engines of the ASIC. The problem is that if later on we
stop the reset process (due to inability to clean memory mappings in time),
the CPU will remain in halt mode. This creates many issues, such as
thermal/power control and FLR handling.
Therefore, move the halting of the device CPU to the very end of the reset
process, just before writing to the registers to initiate the reset. In
addition, the driver now needs to send a message to the device F/W to
disable it from sending interrupts to the host machine because during halt
engines function the driver disables the MSI/MSI-X interrupts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Remove an old hash that is not in use anymore.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Instead of using the free slots amount on the compute CQ to determine
whether we can submit work to queues, use the queues pi/ci.
This is needed in future ASICs where we don't have CQ per queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently the amount of maximum queues is statically configured.
Using a static value is causing redundunt cycles when traversing
all queues and consumes more memory than actually needed.
In this patch we configure each asic with the exact number of
queues needed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Soft-reset isn't supported in GAUDI. Remove the code that performs it and
print error in case the user wants to do it via sysfs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Divide iATU initialization into inbound/outbound methods.
We must separate it in order to enable different match mode
per PCIe region.
In addition, added support for PCI address match mode.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ECC (Error Correcting Code) interrupts are going to be handled
by the FW. Hence, we define an interface in which the driver can
obtain the relevant ECC information.
This information is needed for monitoring and can also lead
to a hard reset if ECC error is not correctable.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add command submission statistics structure which can be obtained
through the info ioctl. Each drop counter describes the reason for
which the command submission was dropped.
This information is needed for the user to be aware of the specific
reason for which the submitted work was dropped. The user can then
utilize the driver more efficiently.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Linus Torvalds