Extract detection of the cpu boot status to a function
to allow code reuse
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
rephrase some error/warning/notice messages to make them more accessible to
ordinary users.
There is no need to print context ASID as the driver currently doesn't
support multiple contexts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
After recent concurrent cs amount increase, we must also
increase queues depth since much more concurrent work can be done.
All external queue depths were increased to 4096 as gaudi's
internal queue depths were also increased to 1024.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Rephrase F/W error message to make it more understandable to ordinary
users.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The profiler needs to know the PLL values for correctly showing the
profiling data. Because our firmware can use different PLL configurations,
we need to read the PLL values from the ASIC to pass them to the profiler.
Signed-off-by: Adam Aharon <aaharon@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Once there is a 64-bit field in a structure, GCC compiler for ARM aligns
the structure to 8 bytes. In order to avoid confusion when these
structures are being passed between CPUs from different architectures, we
explicitly align the structure to 8 bytes.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Currently sync stream is limited only for external queues. We want to
remove this constraint by adding a new queue property dedicated for sync
stream. In addition we move the initialization and reset methods to the
common code since we can re-use them with slight changes.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Training schemes requires much more concurrent command submissions than
inference does. In addition, training command submissions can be completed
in a non serialized manner. Hence, we add support in which each ASIC will
be able to configure the amount of concurrent pending command submissions,
rather than use a predefined amount. This change will enhance performance
by allowing the user to add more concurrent work without waiting for the
previous work to be completed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We no longer need to initialize the rate limiters in GAUDI A1.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Replace the single element arrays with a simple value type u8 reserved,
even thought is is not used for dynamically sized trailing elements
it confuses the effort of replacing one-element arrays with
flexible arrays for that purpose.
Link: https://github.com/KSPP/linux/issues/79
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sizeof(*dev) + sizeof(*hw) instead of
sizeof(struct mei_device) + sizeof(struct mei_me_hw)
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sizeof(connect_data))) instead of
sizeof(struct mei_connect_client_data) when copying data
between user space and kernel.
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3c3b7ddef7, as it
turns out Tomas made a better series of patches for this same issue.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One-element arrays are being deprecated[1]. Replace the one-element
arrays with a simple value type u8 reserved, once this is just a
placeholder for alignment.
Also, while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the variable type is changed
but the corresponding sizeof that is passed as argument is not.
[1] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
Also, make use of the array_size() helper instead of the open-coded
version in memcpy(). These sorts of multiplication factors need to
be wrapped in array_size().
And while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the pointer variable type is
changed but the corresponding sizeof that is passed as argument is not.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722181534.GA31357@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When reading registers defined by the PCIe spec, use the names already
defined by the PCI core. This makes maintenance of the PCI core and
drivers easier. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org
[ additional replacements due to changes in my tree - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of hard-coding the location of the L1 PM Substates capability based
on the Device ID, search for it in the extended capabilities list. This
works for any device, as long as it implements the L1 PM Substates
capability correctly, so it doesn't require maintenance as new devices are
added. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org
[ minor addition due to differences in my tree - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_pci_read_config_dword() and similar wrappers around the PCI config
accessors add very little value, and they obscure the fact that often we
are accessing standard PCI registers that should be coordinated with the
PCI core.
Remove the wrappers and use the PCI config accessors directly. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org
[ fixed up some other instances as original patch was based on old tree - gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the driver-specific rtsx_pci_write_config_byte() to update
the PCIe Link Control Register, use pcie_capability_write_word() like the
rest of the kernel does. This makes it easier to maintain ASPM across the
PCI core and drivers.
No functional change intended. I missed this when doing 3d1e7aa80d
("misc: rtsx: Use pcie_capability_clear_and_set_word() for
PCI_EXP_LNKCTL").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Queue index is received from the user. Therefore, we must validate it
before using it to access the queue props array.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713175506.36676-1-grandmaster@al2klimov.de
Some opencapi FPGA images allow to control if the FPGA should be reloaded
on the next adapter reset. If it is supported, the image specifies it
through a Vendor Specific DVSEC in the config space of function 0.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com
In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
There scope should be limited within arch/x86.
Change all PCIBIOS_SUCCESSFUL to 0
Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
Link: https://lore.kernel.org/r/20200713122247.10985-14-refactormyself@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We see that sometimes the CPU in GOYA and GAUDI is occupied by the
power/thermal loop and can't answer requests from the driver fast enough.
Therefore, to avoid false notifications on timeouts, increase the timeout
to 4 seconds on each message sent to the device CPU.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock gating debugfs interface to be bitmask instead of true/false.
Each bit represents a different engine, according to gaudi_engine_id enum.
See debugfs documentation for more details.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
WREG_BULK is a special packet that has a variable length. Therefore, we
can't parse it when validating CBs that go to the PCI DMA queue. In case
the user needs to use it, it can put multiple WREG32 packets instead.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
In order to support new chip rts5228, the definitions of some internal
registers and workflow have to be modified.
Added rts5228.c rts5228.h for independent functions of the new chip rts5228
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vop_dc_to_vdev dropped an __iomem tag on its argument,
causing a sparse warning. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20200710113447.427927-1-mst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keeping the pointer increment though.
Fixes the following W=1 kernel build warning:
drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
178 | __be32 *data, drc_index, phandle;
| ^~~~~~~~~
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200709065651.GY3500@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... as is the case when !CONFIG_ACPI.
Fixes the following W=1 kernel build warning:
drivers/misc/eeprom/at24.c:228:36: warning: ‘at24_acpi_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200701093616.GX1179328@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix NULL pointer error if removing uacce's parent module during app's
running. SIGBUS is already reported by do_page_fault, so uacce_vma_fault
is not needed. If providing vma_fault, vmf->page has to be filled as well,
required by __do_fault.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1592229357-1904-1-git-send-email-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Formatting is correct and descriptions are all present, but some
of the argument names are not properly represented in the
documentation.
Fixes the following W=1 build warnings:
drivers/misc/ibmvmc.c:780: warning: Function parameter or member 'msg_len' not described in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:780: warning: Excess function parameter 'msg_length' description in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:1041: warning: Function parameter or member 'buffer' not described in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1041: warning: Excess function parameter 'buf' description in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1360: warning: Function parameter or member 'file' not described in 'ibmvmc_ioctl'
drivers/misc/ibmvmc.c:1360: warning: Excess function parameter 'session' description in 'ibmvmc_ioctl'
Cc: Steven Royer <seroyer@linux.ibm.com>
Cc: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Cc: Dave Engebretsen <engebret@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A nice attempt was made to provide kerneldoc headers for
read_template_version() and read_afu_lpc_memory_info() however,
the provided formatting does not match what is expected by
kerneldoc.
Fixes the following W=1 warnings:
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'dev' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'fn' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'len' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'version' not described in 'read_template_version'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'dev' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'fn' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'afu' not described in 'read_afu_lpc_memory_info'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function headers will need a lot of work before they reach the
standards expected of kerneldoc. Demote them down to basic
comments/headers, for now at least.
Fixes the following W=1 kernel build warnings:
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'unit_address' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'process_token' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'op' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p1' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p2' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p3' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p4' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'out' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:245: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_afu'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'unit_address' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'process_token' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'unit_address' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'process_token' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'unit_address' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'state' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'offset' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'len' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'cr_num' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'offset' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'len' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'unit_address' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'process_token' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'record' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'reg' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'unit_address' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'value' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'value' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'process_token' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'info' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'process_token' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'control_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'reset_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'op' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p1' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p2' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p3' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p4' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'out' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:516: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'op' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'num' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'out' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'num' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'out' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'unit_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'list_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'num' not described in 'cxl_h_validate_adapter_image'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, for some reason documentation of all 'scifdev' arguments
are missing, so apply those. Also remove 2 descriptions of 'ep'
which appear to document non-existent function arguments.
drivers/misc/mic/scif/scif_rma.c:468: warning: Function parameter or member 'scifdev' not described in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:468: warning: Excess function parameter 'ep' description in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:510: warning: Excess function parameter 'ep' description in 'scif_destroy_remote_window'
drivers/misc/mic/scif/scif_rma.c:1045: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_req'
drivers/misc/mic/scif/scif_rma.c:1080: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_gnt_rej'
drivers/misc/mic/scif/scif_rma.c:1104: warning: Function parameter or member 'scifdev' not described in 'scif_free_virt'
drivers/misc/mic/scif/scif_rma.c:1142: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg'
drivers/misc/mic/scif/scif_rma.c:1178: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg'
drivers/misc/mic/scif/scif_rma.c:1243: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_ack'
drivers/misc/mic/scif/scif_rma.c:1262: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_nack'
drivers/misc/mic/scif/scif_rma.c:1280: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_ack'
drivers/misc/mic/scif/scif_rma.c:1299: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_nack'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly add missing descriptions for every use of 'scifdev', then
correct incorrect formatting of existing function argument descriptions
changing to the expected format of '@.*: ', finally add missing
description for function argument 'mark'.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_fence.c:19: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark'
drivers/misc/mic/scif/scif_fence.c:41: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark_resp'
drivers/misc/mic/scif/scif_fence.c:64: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait'
drivers/misc/mic/scif/scif_fence.c:101: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait_resp'
drivers/misc/mic/scif/scif_fence.c:122: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_local'
drivers/misc/mic/scif/scif_fence.c:143: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_remote'
drivers/misc/mic/scif/scif_fence.c:164: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_resp'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'epd' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'roff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'rval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'loff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'lval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'flags' not described in 'scif_send_fence_signal'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly demote scif_rma_destroy_tcw()'s header to a standard
comment as no attempt has been made to document any of the
function arguments. Secondly, provide missing description
for 'prot' for scif_register_temp().
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'mmn' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'start' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'len' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:344: warning: Function parameter or member 'prot' not described in 'scif_register_temp'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing descriptions for function args, the promotion
of obvious kerneldoc headers and the mis-formatting of existing
argument descriptions.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_nm.c:19: warning: Function parameter or member 'node' not described in 'scif_invalidate_ep'
drivers/misc/mic/scif/scif_nm.c:173: warning: Function parameter or member 'node_id' not described in 'scif_disconnect_node'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing function argument documentation, misnamed argument
tags, the promotion of obvious kerneldoc header candidates and an
ordering issue (functions must follow the kerneldoc which describes
them).
Fixes the following W=1 kernel build issues:
drivers/misc/mic/scif/scif_nodeqp.c:452: warning: Function parameter or member 'scifdev' not described in 'scif_node_connect'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Function parameter or member 'unused' not described in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Excess function parameter 'msg' description in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Function parameter or member 'unused' not described in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Excess function parameter 'msg' description in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:939: warning: Function parameter or member 'scifdev' not described in 'scif_node_add_nack'
drivers/misc/mic/scif/scif_nodeqp.c:988: warning: Function parameter or member 'scifdev' not described in 'scif_get_node_info_resp'
drivers/misc/mic/scif/scif_nodeqp.c:1070: warning: cannot understand function prototype: 'int scif_max_msg_id = SCIF_MAX_MSG; '
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Function parameter or member 'unused' not described in 'scif_loopb_wq_handler'
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Excess function parameter 'work' description in 'scif_loopb_wq_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason (copy 'n' paste error?) the passed in pointers to
'struct scif_dev scifdev' weren't described throughout the source
file. Change that.
Fixes the following W=1 kernel build warning(s):
drivers/misc/mic/scif/scif_epd.c:120: warning: Function parameter or member 'scifdev' not described in 'scif_cnctreq'
drivers/misc/mic/scif/scif_epd.c:166: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt'
drivers/misc/mic/scif/scif_epd.c:191: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_ack'
drivers/misc/mic/scif/scif_epd.c:213: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_nack'
drivers/misc/mic/scif/scif_epd.c:230: warning: Function parameter or member 'scifdev' not described in 'scif_cnctrej'
drivers/misc/mic/scif/scif_epd.c:255: warning: Function parameter or member 'scifdev' not described in 'scif_discnct'
drivers/misc/mic/scif/scif_epd.c:309: warning: Function parameter or member 'scifdev' not described in 'scif_discnt_ack'
drivers/misc/mic/scif/scif_epd.c:325: warning: Function parameter or member 'scifdev' not described in 'scif_clientsend'
drivers/misc/mic/scif/scif_epd.c:341: warning: Function parameter or member 'scifdev' not described in 'scif_clientrcvd'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'epd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'peer' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'newepd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'flags' not described in 'scif_accept'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'read_size' appears to have been assigned, but never used since the
SCIF messaging and node enumeration APIs were introduced in 2015.
Makes sense to simply remove it.
Fixes the following W=1 warning:
drivers/misc/mic/scif/scif_api.c: In function ‘_scif_recv’:
drivers/misc/mic/scif/scif_api.c:1000:6: warning: variable ‘read_size’ set but not used [-Wunused-but-set-variable]
1000 | int read_size;
| ^~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 's' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 'unused' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 's' not described in 'force_reset_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 'pos' not described in 'force_reset_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__scif_get_port() has never taken 'port' as an argument since
its inception back in 2015. Probably document the proper arguments
expected 'start' and 'end'.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'start' not described in '__scif_get_port
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'end' not described in '__scif_get_port'
drivers/misc/mic/scif/scif_ports.c:36: warning: Excess function parameter 'port' description in '__scif_get_port'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning:
drivers/misc/mic/cosm/cosm_main.c:31: warning: Function parameter or member 'force' not described in 'cosm_hw_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_debugfs.c:108: warning: Function parameter or member 'mdev' not described in 'mic_create_debug_dir'
drivers/misc/mic/host/mic_debugfs.c:131: warning: Function parameter or member 'mdev' not described in 'mic_delete_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 's' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 'unused' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:53: warning: Function parameter or member 'mdrv' not described in 'mic_create_card_debug_dir'
drivers/misc/mic/card/mic_debugfs.c:67: warning: Function parameter or member 'mdrv' not described in 'mic_delete_card_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_x100.c:127: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_sbox_intr'
drivers/misc/mic/host/mic_x100.c:148: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_rdmasr_intr'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'dma_addr' not described in 'mic_x100_smpt_set'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'index' not described in 'mic_x100_smpt_set'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mic_interrupt() and mic_setup_msix() have incomplete documentation.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'irq' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'dev' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:188: warning: Function parameter or member 'pdev' not described in 'mic_setup_msix'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message_size' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:55: warning: Function parameter or member 'sp' not described in 'ibmasm_send_driver_vpd'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'sp' not described in 'ibmasm_send_os_state'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'os_state' not described in 'ibmasm_send_os_state'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mic_x100_intr_init[] is only ever used in mic_x100.c, so instead
of listing to the compiler complain about unused static arrays
simply move it into the c-file for direct consumption. This way
it can stay 'static'.
Fixes the following W=1 kernel build warning:
In file included from drivers/misc/mic/host/mic_main.c:17:
drivers/misc/mic/host/mic_x100.h:70:18: warning: ‘mic_x100_intr_init’ defined but not used [-Wunused-const-variable=]
70 | static const u16 mic_x100_intr_init[] = {
| ^~~~~~~~~~~~~~~~~~
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'sp' not described in 'ibmasm_start_reverse_heartbeat'
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'rhb' not described in 'ibmasm_start_reverse_heartbeat'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'sp' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'cmd' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'cmd' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'timeout' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'response' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'size' not described in 'ibmasm_receive_command_response'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data_size' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'sp' not described in 'ibmasm_get_next_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'reader' not described in 'ibmasm_get_next_event'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions are not exported and no external prototypes exist
Fixes W=1 kernel build warning(s):
drivers/misc/sgi-xp/xp_main.c:227:1: warning: no previous prototype for ‘xp_init’ [-Wmissing-prototypes]
227 | xp_init(void)
| ^~~~~~~
drivers/misc/sgi-xp/xp_main.c:250:1: warning: no previous prototype for ‘xp_exit’ [-Wmissing-prototypes]
250 | xp_exit(void)
| ^~~~~~~
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc does not understand file headers. There is therefor
no reason for them to use the syntax.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There has been no attempt to provide documentation for these function's
arguments, so align with the remainder of the file and just treat
them as standards function headers.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'n' not described in 'genwqe_is_visible'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
re-ordering of #defines i.e. not placed between kerneldoc headers
and the functions they are documenting and re-documenting of changed/
renamed arguments.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_ddcb.c:83: warning: Function parameter or member 'queue' not described in 'queue_empty'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'cd' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'queue' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'ddcb_no' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'req' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'ddcb_no' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:364: warning: Function parameter or member 'queue' not described in 'genwqe_check_ddcb_queue'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'queue' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'num' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Function parameter or member 'cmd' not described in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Excess function parameter 'req' description in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:972: warning: Function parameter or member 'cd' not described in 'genwqe_next_ddcb_ready'
drivers/misc/genwqe/card_ddcb.c:1002: warning: Function parameter or member 'cd' not described in 'genwqe_ddcbs_in_flight'
drivers/misc/genwqe/card_ddcb.c:1181: warning: Function parameter or member 'data' not described in 'genwqe_card_thread'
drivers/misc/genwqe/card_ddcb.c:1308: warning: Function parameter or member 'cd' not described in 'queue_wake_up_all'
drivers/misc/genwqe/card_ddcb.c:1333: warning: Function parameter or member 'cd' not described in 'genwqe_finish_queue'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
repairing formatting (kerneldoc does not like blank lines) and the
demotion of a kerneldoc header which shows no interest in providing
documentation for any of its arguments.
Fixes this the following W=1 issues:
drivers/misc/genwqe/card_utils.c:37: warning: Incorrect use of kernel-doc format: * __genwqe_writeq() - Write 64-bit register
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'cd' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'byte_offs' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'val' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'cd' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'app_name' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'len' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:186: warning: bad line:
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'cd' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'sgl' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_addr' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_size' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'write' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'cd' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'sgl' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:716: warning: Function parameter or member 'count' not described in 'genwqe_set_interrupt_capability'
drivers/misc/genwqe/card_utils.c:747: warning: Function parameter or member 'idx' not described in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:747: warning: Excess function parameter 'index' description in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'max_regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'cd' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'reg' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'val' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'func' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'cd' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'reg' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'func' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:995: warning: Function parameter or member 'cd' not described in 'genwqe_base_clock_frequency'
drivers/misc/genwqe/card_utils.c:1012: warning: Function parameter or member 'cd' not described in 'genwqe_stop_traps'
drivers/misc/genwqe/card_utils.c:1022: warning: Function parameter or member 'cd' not described in 'genwqe_start_traps'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
#
# Date: Mon Jun 29 10:30:56 2020 +0100
#
# On branch tb-mfd-fix-warnings
# Changes to be committed:
# modified: drivers/misc/genwqe/card_utils.c
#
# Untracked files:
# qemu-i2c-devs.txt
#
Link: https://lore.kernel.org/r/20200701085853.164358-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; add missing documentation for function arguments, re-ordering
of #defines i.e. not placed between kerneldoc headers and the functions
they are documenting, demotion of file header/comment from kerneldoc
format and removal of documentation for non-existent args.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From missing documentation for function arguments, to promotion
obvious kerneldoc headers and incorrectly named arguments.
Fixes the following W=1 warnings:
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:617: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:760: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:889: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1046: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1131: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1207: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genwqe_recover_card()'s function arguments were missing from its
kerneldoc header. Provide descriptions for 'cd' and 'fatal_err'.
Fixes the following kernel build W=1 warning:
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'rc' hasn't been checked since the driver's inception
in 2013. If it hasn't caused any issues since then, it's unlikely
to in the future. Let's take it out for now.
Fixes the following W=1 kernel build warning(s):
drivers/misc/genwqe/card_base.c: In function ‘genwqe_health_check_stop’:
/home/lee/projects/linux/kernel/drivers/misc/genwqe/card_base.c:1046:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enclosure_remove_device() hasn't taken an 'int component for over a decade.
Instead use kerneldoc to describe the 'struct device' actually passed in.
Fixes the following W=1 kernel build warning(s):
drivers/misc/enclosure.c:400: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:400: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Probably a copy 'n' paste error, 'offset_address' has never been
part of the pch_phub_{read,write}_gbe_mac_addr() functions.
Squashes the following W=1 warnings:
drivers/misc/pch_phub.c:450: warning: Excess function parameter 'offset_address' description in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Excess function parameter 'offset_address' description in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason (probably copy 'n' paste) kerneldoc descriptions
were missing for all instances of 'chip'. Providing them squashes
the following W=1 kernel build warnings:
drivers/misc/pch_phub.c:145: warning: Function parameter or member 'chip' not described in 'pch_phub_read_modify_write_reg'
drivers/misc/pch_phub.c:282: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom'
drivers/misc/pch_phub.c:296: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom'
drivers/misc/pch_phub.c:334: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom_val'
drivers/misc/pch_phub.c:350: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom_val'
drivers/misc/pch_phub.c:450: warning: Function parameter or member 'chip' not described in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Function parameter or member 'chip' not described in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's odd for the return value to be assigned to a variable so many
times, but never actually checked, but this has been the case since
the driver's inception in 2012. If it hasn't caused any issues by
now, it's probably unlikely to. Let's take it out, at least until
someone finds a reason to start using it.
Fixes the following W=1 kernel build warning:
drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’:
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly some missing function argument documentation, then some
whch are present, but are incorrectly named.
Fixes the following W=1 kernel build warnings:
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gaudi_pb_set_block()'s argument 'base' was incorrectly named 'block' in
its function header.
Fixes the following W=1 kernel build warning(s):
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Function parameter or member 'base' not described in 'gaudi_pb_set_block'
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Excess function parameter 'block' description in 'gaudi_pb_set_block'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of description of gaudi_set_asic_funcs()'s
'hdev' argument. In reality it is documented, but the formatting
was not as expected '@.*:'. Instead, there was a misplaced asterisk
which was confusing the kerneldoc validator.
Squashes the following W=1 warning:
drivers/misc/habanalabs/gaudi/gaudi.c:6746: warning: Function parameter or member 'hdev' not described in 'gaudi_set_asic_funcs'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt to check the return value of RREG32() has been made
since the call was introduced a year ago.
Fixes W=1 kernel build warning:
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'dma_mask' is not passed directly into hl_pci_set_dma_mask() as
an argument. Instead, it is pulled from struct hl_device *hdev.
Fixed the following W=1 warning:
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seeing as 'addr' is unsigned, it would be impossible for the assigned
value to be anything other than zero or positive.
Squashes the following W=1 warnings:
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read32’:
drivers/misc/habanalabs/goya/goya.c:3945:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
3945 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write32’:
drivers/misc/habanalabs/goya/goya.c:4002:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4002 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read64’:
drivers/misc/habanalabs/goya/goya.c:4047:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4047 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write64’:
drivers/misc/habanalabs/goya/goya.c:4091:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4091 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of descriptions for various
function arguments. In reality they are documented, but the
formatting was not as expected '@.*:'. Instead, '-'s were
used as separators.
While we're here, the headers for functions various functions
were written in kerneldoc format, but lack the kerneldoc
identifier '/**'. Let's promote them so they can gain access
to the checker.
This change fixes the following W=1 warnings:
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_work' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'hdev' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_entry' not described in 'hl_eqe_work'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hl_pci_bars_map() has a miss-typed argument name in the function
description. hl_pci_elbi_write() was missing documented arguments.
The headers for functions hl_pci_bars_unmap(), hl_pci_elbi_write()
and hl_pci_reset_link_through_bridge() were written in kerneldoc
format, but lack the kerneldoc identifier '/**'. Let's promote
them so they can gain access to the checker.
These changes fix the following W=1 kernel build warnings:
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though documentation for these function arguments have
been missing since the driver's inception last year.
Fixes the following W=1 kernel build warnings:
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'fw_name' not described in 'hl_fw_load_fw_to_device'
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'dst' not described in 'hl_fw_load_fw_to_device'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc tooling/parsers/validators get confused if non-
standard formatting is used. The first line after the kerneldoc
identifier '/**' must not be blank else the following warnings
will be issued:
drivers/misc/pti.c:902: warning: Cannot understand *
on line 902 - I thought it was a doc line
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of descriptions for various
function arguments. In reality they are documented, but the
formatting was not as expected '@.*:'. Instead, '-'s were
used as separators.
This change fixes the following warnings:
drivers/misc/pti.c:748: warning: Function parameter or member 'port' not described in 'pti_port_activate'
drivers/misc/pti.c:748: warning: Function parameter or member 'tty' not described in 'pti_port_activate'
drivers/misc/pti.c:765: warning: Function parameter or member 'port' not described in 'pti_port_shutdown'
drivers/misc/pti.c:793: warning: Function parameter or member 'pdev' not described in 'pti_pci_probe'
drivers/misc/pti.c:793: warning: Function parameter or member 'ent' not described in 'pti_pci_probe'
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's not needed to set driver to NULL in mei_cl_device_remove()
which is bus_type remove() handler as this is done anyway
in __device_release_driver().
Actually this is causing an endless loop in driver_detach()
on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module.
The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty.
as the check is always true in __device_release_driver()
if (dev->driver != drv)
return;
The non upstream patch is causing this behavior, titled:
'vfio -- release device lock before userspace requests'
Nevertheless the fix is correct also for the upstream.
Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/
Cc: <stable@vger.kernel.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The API has moved on since the original function header was
authored. This changes brings the function's documentation
back into line with reality, complete descriptions of the
latest arguments to be used.
Squashes the following W=1 kernel build warnings:
drivers/misc/pti.c:510: warning: Function parameter or member 'tty' not described in 'pti_tty_driver_wr
drivers/misc/pti.c:510: warning: Function parameter or member 'buf' not described in 'pti_tty_driver_wr
drivers/misc/pti.c:510: warning: Excess function parameter 'filp' description in 'pti_tty_driver_write'
drivers/misc/pti.c:510: warning: Excess function parameter 'data' description in 'pti_tty_driver_write'
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In kerneldoc format, data structures have to start with 'struct'
else the kerneldoc tooling/parsers/validators get confused.
Squashes the following W=1 warning:
drivers/misc/habanalabs/irq.c:19: warning: cannot understand function prototype: 'struct hl_eqe_work '
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt was made to provide a proper kerneldoc header for
cb710_sg_dwiter_write_next_block(), but a description for it's 'data'
argument was missed.
Squashes W=1 kernel build warning:
drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block'
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christine Gharzuzi