In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this
and just use pi->hw
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Beyond a specific version of firmware, there is no need to provide
override values to the firmware when setting PHY capabilities. In this
case, we do not need to indicate whether we're in Strict or Lenient Link
Mode.
In the case of translating capabilities to the configuration structure,
the module compliance enforcement is already correctly set by firmware,
so the extra code block is redundant.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Recent firmware supports a new "get PHY capabilities" mode
ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver
to track and apply NVM based default link overrides.
If FW AQ API version supports it, use Report Default Configuration.
Add check function for Report Default Configuration support and update
accordingly.
Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for
clarity.
Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In ice_set_link_ksettings, use assignment instead of memset/memcpy
where possible
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Return more appropriate error codes so that the right error
message is communicated to the user by ethtool.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to
'pi'. This is more consistent with similar usages elsewhere in the
driver.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The loop checking for PF VSI doesn't make any sense. The VSI type
backing the netdev passed to ice_set_link_ksettings will always be
of type ICE_PF_VSI. Remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When link is owned by manageability, the driver is not allowed to fiddle
with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so.
This patch adds a new function ice_set_link which abstracts the call to
ice_aq_set_link_restart_an and provides a clean way to turn on/off link.
While making this change, I also spotted that an int variable was being
used to hold both an ice_status return code and the Linux errno return
code. This pattern more often than not results in the driver inadvertently
returning ice_status back to kernel which is a major boo-boo. Clean it up.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For get PHY abilities AQ, the specification defines "report modes"
as "with media", "without media" and "active configuration". For
clarity, rename macros to align with the specification.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the recursive way of adding the nodes to the layer in order
to reduce the stack usage. Instead the algorithm is modified to use
a while loop.
The previous code was scanning recursively the nodes horizontally.
The total stack consumption will be based on number of nodes present
on that layer. In some cases it can consume more stack.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Retry sending some AQ commands, as result of EBUSY AQ error.
ice_aqc_opc_get_link_topo
ice_aqc_opc_lldp_stop
ice_aqc_opc_lldp_start
ice_aqc_opc_lldp_filter_ctrl
This change follows the latest guidelines from HW team. It is
better to retry the same AQ command several times, as the result
of EBUSY, instead of returning error to the caller right away.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
module_spi_driver() makes the code simpler by eliminating
boilerplate code.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the changelog, asynchronous mode was dropped sometime
before v2.2. Let's get rid of the unused driver-specific async state as
well so that it doesn't show up when doing tree-wide tty work.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.
It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.
Fix this by casting the port parameter to the macro to a u64 before
the shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: 5bc67f587b ("liquidio: CN23XX register definitions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error check on err is always false as err is always 0 at the
port_found label. The code is redundant and can be removed.
Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmBtX9oTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqTNvB/0RHn+yoXjr0C/DjgfIAXtBZy9HMmA+
ZmNFrF3Is3dLaDkEv2FRTVpJlexRtBqlex+Ca6RCDo16/rR++JU9HWXiJaEp0Upx
Oc4HPxtnjRne8NJGsbi9tnaQ8o6IazAEr4+vS4r7dOf2flSOfDfo0UMMGNHrG6r9
KrLcSCUf/hM353G68oVWXRtaxDYWW8ueAp6m5Qmo6JeSCkLNYvQjyLtqOV9toer6
9U3zvsF4VGkQdO/JiXXarO7fXjlCq/n8822z+L/YeN1DrSHjCGZ1vn+lnMrpeA7F
7X7vLv7rtfrF+r+OJTBiW+OklsQMvw+cMaCcn2eMON4zNQ7o8jmLALiF
=69Yd
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.13-20210407' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-04-07
this is a pull request of 6 patches for net-next/master.
The first patch targets the CAN driver infrastructure, it improves the
alloc_can{,fd}_skb() function to set the pointer to the CAN frame to
NULL if skb allocation fails.
The next patch adds missing error handling to the m_can driver's RX
path (the code was introduced in -next, no need to backport).
In the next patch an unused constant is removed from an enum in the
c_can driver.
The last 3 patches target the mcp251xfd driver. They add BQL support
and try to work around a sometimes broken CRC when reading the TBC
register.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is only one place where we want to specify new_ifindex. In all
other cases, callers pass 0 as new_ifindex. It looks reasonable to add a
low-level function with new_ifindex and to convert
dev_change_net_namespace to a static inline wrapper.
Fixes: eeb85a14ee ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this case, we don't need to check that new_ifindex is positive in
validate_linkmsg.
Fixes: eeb85a14ee ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce TC sample offload
Background
----------
The tc sample action allows user to sample traffic matched by tc
classifier. The sampling consists of choosing packets randomly and
sampling them using psample module.
The tc sample parameters include group id, sampling rate and packet's
truncation (to save kernel-user traffic).
Sample in TC SW
---------------
User must specify rate and group id for sample action, truncate is
optional.
tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower \
src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03 \
action sample rate 10 group 5 trunc 60 \
action mirred egress redirect dev enp4s0f0_1
The tc sample action kernel module 'act_sample' will call another
kernel module 'psample' to send sampled packets to userspace.
MLX5 sample HW offload - MLX5 driver patches
--------------------------------------------
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
For example, for the following typical flow table:
+-------------------------------+
+ original flow table +
+-------------------------------+
+ original match +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+
We translate the tc filter with sample action to the following HW model:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
Flow sampler object
-------------------
Hardware introduces flow sampler object to do sample. It is a new
destination type. Driver needs to specify two flow table ids in it.
One is sample table id. The other one is the default table id.
Sample table samples the packets according to the sample rate and
forward the sampled packets to eswitch manager port. Default table
finishes the subsequent actions.
Group id and reg_c0
-------------------
Userspace program will take different actions for sampled packets
according to tc sample action group id. So hardware must pass group
id to software for each sampled packets. In Paul Blakey's "Introduce
connection tracking offload" patch set, reg_c0 lower 16 bits are used
for miss packet chain id restore. We convert reg_c0 lower 16 bits to
a common object pool, so other features can also use it.
Since sample group id is 32 bits, create a 16 bits object id to map
the group id and write the object id to reg_c0 lower 16 bits. reg_c0
can only be used for matching. Write reg_c0 to flow_tag, so software
can get the object id via flow_tag and find group id via the common
object pool.
Sampler restore handle
----------------------
Use common object pool to create an object id to map sample parameters.
Allocate a modify header action to write the object id to reg_c0 lower
16 bits. Create a restore rule to pass the object id to software. So
software can identify sampled packets via the object id and send it to
userspace.
Aggregate the modify header action, restore rule and object id to a
sample restore handle. Re-use identical sample restore handle for
the same object id.
Send sampled packets to userspace
---------------------------------
The destination for sampled packets is eswitch manager port, so
representors can receive sampled packets together with the group id.
Driver will send sampled packets and group id to userspace via psample.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmBtNrUACgkQSD+KveBX
+j6cRQf/ZARhVPDEgCvFd+wD+n2VCM11FJCpIumGecfqpA9DB/7i0iQrBWG2cGy6
Go3XZ7HCPy0bAeDnVMBulF5RshfQkB/CNJfCTrw0QkNvenO/eYPZrl0XAGwL7w8W
9vkeK51VG70bj7VEMeWVovL0X2VoGea0MD0ASLgOG3qZmCjFX0Aw3yY4WNZAA1fn
i9rSP0AgTXqbR+nUezqP9xDHCyEf4etqpdPO/gosFvasZxTa9Xm6tXxT8YrcjAEH
MjIYJVS5SERem/gxqrRi5p0u1RNrbZ3vPMmZQIr6x2eBXLwMhvjvcxKqZ2l9PvD5
+O+Hf43GAmhAoqZukvU8H8oMWArciA==
=MkzD
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-06
Introduce TC sample offload
Background
----------
The tc sample action allows user to sample traffic matched by tc
classifier. The sampling consists of choosing packets randomly and
sampling them using psample module.
The tc sample parameters include group id, sampling rate and packet's
truncation (to save kernel-user traffic).
Sample in TC SW
---------------
User must specify rate and group id for sample action, truncate is
optional.
tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower \
src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03 \
action sample rate 10 group 5 trunc 60 \
action mirred egress redirect dev enp4s0f0_1
The tc sample action kernel module 'act_sample' will call another
kernel module 'psample' to send sampled packets to userspace.
MLX5 sample HW offload - MLX5 driver patches
--------------------------------------------
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
For example, for the following typical flow table:
+-------------------------------+
+ original flow table +
+-------------------------------+
+ original match +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+
We translate the tc filter with sample action to the following HW model:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
Flow sampler object
-------------------
Hardware introduces flow sampler object to do sample. It is a new
destination type. Driver needs to specify two flow table ids in it.
One is sample table id. The other one is the default table id.
Sample table samples the packets according to the sample rate and
forward the sampled packets to eswitch manager port. Default table
finishes the subsequent actions.
Group id and reg_c0
-------------------
Userspace program will take different actions for sampled packets
according to tc sample action group id. So hardware must pass group
id to software for each sampled packets. In Paul Blakey's "Introduce
connection tracking offload" patch set, reg_c0 lower 16 bits are used
for miss packet chain id restore. We convert reg_c0 lower 16 bits to
a common object pool, so other features can also use it.
Since sample group id is 32 bits, create a 16 bits object id to map
the group id and write the object id to reg_c0 lower 16 bits. reg_c0
can only be used for matching. Write reg_c0 to flow_tag, so software
can get the object id via flow_tag and find group id via the common
object pool.
Sampler restore handle
----------------------
Use common object pool to create an object id to map sample parameters.
Allocate a modify header action to write the object id to reg_c0 lower
16 bits. Create a restore rule to pass the object id to software. So
software can identify sampled packets via the object id and send it to
userspace.
Aggregate the modify header action, restore rule and object id to a
sample restore handle. Re-use identical sample restore handle for
the same object id.
Send sampled packets to userspace
---------------------------------
The destination for sampled packets is eswitch manager port, so
representors can receive sampled packets together with the group id.
Driver will send sampled packets and group id to userspace via psample.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In function fdp_nci_patch_otp and fdp_nci_patch_ram，many goto
out statements are used, and out label just return variable r.
in some places,just jump to the out label, and in other places,
assign a value to the variable r,then jump to the out label.
It is unnecessary, we just use return sentences to replace goto
sentences and delete out label.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable software thermal protection by removing critical trip points
from all thermal zones.
The software thermal protection is redundant given there are two layers
of protection below it in firmware and hardware. The first layer is
performed by firmware, the second, in case firmware was not able to
perform protection, by hardware.
The temperature threshold set for hardware protection is always higher
than for firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up
sequence and vice versa.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing kdoc for phy tunable callbacks.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Cleanup, a new test case, and header trimming
Some more patches to include from the MPTCP tree:
Patches 1-6 refactor an address-related data structure and reduce some
duplicate code that handles IPv4 and IPv6 addresses.
Patch 7 adds a test case for the MPTCP netlink interface, passing a
specific ifindex to the kernel.
Patch 8 drops extra header options from IPv4 address echo packets,
improving consistency and testability between IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no
need to add a DSS element that would fit only ADD_ADDR with IPv4 address.
Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only
difference between add_addr_generate_hmac and add_addr6_generate_hmac.
This patch dropped the duplicate code and unify them into one.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the type of the address family in struct mptcp_options_received
became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of
using MPTCP_ADDR_IPVERSION_4/6.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new struct mptcp_addr_info member addr in struct
mptcp_options_received, and dropped the original family, addr_id, addr,
addr6 and port fields in it. Then we can pass the parameter mp_opt.addr
directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed.
Since the port number became big-endian now, use htons to convert the
incoming port number to it. Also use ntohs to convert it when passing
it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the family field was added in struct mptcp_out_options, no need to
use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h,
added a new struct mptcp_addr_info member addr in struct mptcp_out_options,
and dropped the original addr, addr6, addr_id and port fields in it. Then
we can use opts->addr to get the adding address from PM directly using
mptcp_pm_add_addr_signal.
Since the port number became big-endian now, use ntohs to convert it
before sending it out with the ADD_ADDR suboption. Also convert it
when passing it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.
In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.
In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MCP251XFD_REG_TBC is the time base counter register. It increments
once per SYS clock tick, which is 20 or 40 MHz. Observation shows that
if the lowest byte (which is transferred first on the SPI bus) of that
register is 0x00 or 0x80 the calculated CRC doesn't always match the
transferred one.
To reproduce this problem let the driver read the TBC register in a
high frequency. This can be done by attaching only the mcp251xfd CAN
controller to a valid terminated CAN bus and send a single CAN frame.
As there are no other CAN controller on the bus, the sent CAN frame is
not ACKed and the mcp251xfd repeats it. If user space enables the bus
error reporting, each of the NACK errors is reported with a time
stamp (which is read from the TBC register) to user space.
$ ip link set can0 down
$ ip link set can0 up type can bitrate 500000 berr-reporting on
$ cansend can0 4FF#ff.01.00.00.00.00.00.00
This leads to several error messages per second:
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 3a 86 da, CRC=0x7753) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 01 b4 da, CRC=0x5830) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 e9 23 db, CRC=0xa723) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 8a 30 db, CRC=0x4a9c) retrying.
| mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 f3 43 db, CRC=0x66d2) retrying.
If the highest bit in the lowest byte is flipped the transferred CRC
matches the calculated one. We assume for now the CRC calculation in
the chip works on wrong data and the transferred data is correct.
This patch implements the following workaround:
- If a CRC read error on the TBC register is detected and the lowest
byte is 0x00 or 0x80, the highest bit of the lowest byte is flipped
and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
For now we assume transferred data was OK.
Link: https://lore.kernel.org/r/20210406110617.1865592-5-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch factors out the crc check into a separate function. This is
preparation for the next patch.
Link: https://lore.kernel.org/r/20210406110617.1865592-4-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch re-adds BQL support to the driver. Support for
netdev_xmit_more() will be added in a separate patch series.
Link: https://lore.kernel.org/r/20210406110617.1865592-3-mkl@pengutronix.de
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit 1be37d3b04 ("can: m_can: fix periph RX path: use
rx-offload to ensure skbs are sent from softirq context") the RX path
for peripherals (i.e. SPI based m_can controllers) was converted to
the rx-offload infrastructure. However, the error handling for
can_rx_offload_queue_sorted() was forgotten.
can_rx_offload_queue_sorted() will return with an error if the
internal queue is full.
This patch adds the missing error handling, by increasing the
rx_fifo_errors.
Fixes: 1be37d3b04 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Link: https://lore.kernel.org/r/20210401084515.1455013-1-mkl@pengutronix.de
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1503583 ("Error handling issues")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The handling of CAN bus errors typically consist of allocating a CAN
error SKB using alloc_can_err_skb() followed by stats handling and
filling the error details in the newly allocated CAN error SKB. Even
if the allocation of the SKB fails the stats handling should not be
skipped.
The common pattern in CAN drivers is to allocate the skb and work on
the struct can_frame pointer "cf", if it has been assigned by
alloc_can_err_skb().
| skb = alloc_can_err_skb(priv->ndev, &cf);
|
| /* RX errors */
| if (bdiag1 & (MCP251XFD_REG_BDIAG1_DCRCERR |
| MCP251XFD_REG_BDIAG1_NCRCERR)) {
| netdev_dbg(priv->ndev, "CRC error\n");
|
| stats->rx_errors++;
| if (cf)
| cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ;
| }
In case of an OOM alloc_can_err_skb() returns NULL, but doesn't set
"cf" to NULL as well. For the above pattern to work the "cf" has to be
initialized to NULL, which is easily forgotten.
To solve this kind of problems, set "cf" to NULL if
alloc_can_err_skb() returns NULL.
Link: https://lore.kernel.org/r/20210402102245.1512583-1-mkl@pengutronix.de
Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The following diagram illustrates the hardware model for tc sample action:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark the sampled packets with a sample restore object. Send sampled
packets using the psample api.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use common object pool to create an object ID to map sample parameters.
Allocate a modify header action to write the object ID to reg_c0 lower
16 bits. Create a restore rule to pass the object ID to software. So
software can identify sampled packets via the object ID and send it to
userspace.
Aggregate the modify header action, restore rule and object ID to a
sample restore handle. Re-use identical sample restore handle for
the same object ID.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to offload sample action, HW introduces sampler object. The
sampler object samples packets according to the provided sample ratio.
Sampled packets are duplicated. One copy is processed by a termination
table, named the sample table, which sends the packet up to software.
The second copy is processed by the default table.
Instantiate sampler object. Re-use identical sampler object for
the same sample ratio, sample table and default table as a prestep for
offloading tc sample actions.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Sampled packets are sent to software using termination tables. There
is only one rule in that table that is to forward sampled packets to
the e-switch management vport.
Create a sampler termination table and rule for each eswitch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Anirudh Venkataramanan