This patch adds dev_fill_forward_path() which resolves the path to reach
the real netdevice from the IP forwarding side. This function takes as
input the netdevice and the destination hardware address and it walks
down the devices calling .ndo_fill_forward_path() for each device until
the real device is found.
For instance, assuming the following topology:
IP forwarding
/ \
br0 eth0
/ \
eth1 eth2
.
.
.
ethX
ab💿ef🆎cd:ef
where eth1 and eth2 are bridge ports and eth0 provides WAN connectivity.
ethX is the interface in another box which is connected to the eth1
bridge port.
For packets going through IP forwarding to br0 whose destination MAC
address is ab💿ef🆎cd:ef, dev_fill_forward_path() provides the
following path:
br0 -> eth1
.ndo_fill_forward_path for br0 looks up at the FDB for the bridge port
from the destination MAC address to get the bridge port eth1.
This information allows to create a fast path that bypasses the classic
bridge and IP forwarding paths, so packets go directly from the bridge
port eth1 to eth0 (wan interface) and vice versa.
fast path
.------------------------.
/ \
| IP forwarding |
| / \ \/
| br0 eth0
. / \
-> eth1 eth2
.
.
.
ethX
ab💿ef🆎cd:ef
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to br_vlan_replay_one is returning an error return value but
this is not being assigned to err and the following check on err is
currently always false because err was initialized to zero. Fix this
by assigning err.
Addresses-Coverity: ("'Constant' variable guards dead code")
Fixes: 22f67cdfae ("net: bridge: add helper to replay VLANs installed on port")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
bridge: mrp: Disable roles before deleting
The first patch in this series make sures that the driver is notified
that the role is disabled before the MRP instance is deleted. The
second patch uses this so it can simplify the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the driver will always be notified that the role is deleted
before the ring is deleted, then we don't need to duplicate the logic of
cleaning the resources also in the delete function.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an MRP instance was created, the driver was notified that the
instance is created and then in a different callback about role of the
instance. But when the instance was deleted the driver was notified only
that the MRP instance is deleted and not also that the role is disabled.
This patch make sure that the driver is notified that the role is
changed to disabled before the MRP instance is deleted to have similar
callbacks with the creating of the instance. In this way it would
simplify the logic in the drivers.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns: add some cleanups
This series includes some cleanups for the HNS ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some variables in HNS driver will not being referenced
before assigned, so there is no need to init them.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The !! operation of variable en in hns_mac_config_sds_loopback_acpi()
is redundant, so remove it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HNS_LED_PC_REG is not used and can be removed.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NIC_LB_TEST_RX_PKG_ERR is not used and can be removed.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since config_half_duplex() in struct mac_driver is unused,
so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since set_rx_ignore_pause_frames() in struct mac_driver
is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since set_autoneg() in struct hnae_ae_ops is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since get_autoneg() in struct hnae_ae_ops is unused, so remove it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_wait_allrefs() issues a warning if refcount does not drop to 0
after 10 seconds. While 10 second wait generally should not happen
under normal workload in normal environment, it seems to fire falsely
very often during fuzzing and/or in qemu emulation (~10x slower).
At least it's not possible to understand if it's really a false
positive or not. Automated testing generally bumps all timeouts
to very high values to avoid flake failures.
Add net.core.netdev_unregister_timeout_secs sysctl to make
the timeout configurable for automated testing systems.
Lowering the timeout may also be useful for e.g. manual bisection.
The default value matches the current behavior.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=211877
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
vhca_event.h has been included at line 4, so remove the
duplicate one at line 8.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
indir_table.h has been included at line 41, so remove
the duplicate one at line 43.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for a 32 bit x86 build to use a 64 bit DMA address.
There are two remaining spots where the IPA driver does a modulo
operation to check alignment of a DMA address, and under certain
conditions this can lead to a build error on i386 (at least).
The alignment checks we're doing are for power-of-2 values, and this
means the lower 32 bits of the DMA address can be used. This ensures
both operands to the modulo operator are 32 bits wide.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-03-23
This series contains updates to ice, fm10k, i40e, iavf, ixgbe, ixgbevf,
igb, e1000e, and e1000 drivers.
Tony fixes prototype warnings for mismatched header for ice driver.
Sasha fixes prototype warnings for mismatched header for igc and e1000e
driver.
Jesse fixes prototype warnings for mismatched header for the remaining
Intel drivers: fm10k, i40e, iavf, igb, ixgbe, and ixgbevf.
Gustavo A. R. Silva explicitly adds a break instead of falling through
in preparation of -Wimplicit-fallthrough for Clang to ice, fm10k,
ixgbe, igb, ixgbevf, and e1000 drivers,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Better support for sandwiched LAGs with bridge and DSA
Changes in v4:
- Added missing EXPORT_SYMBOL_GPL
- Using READ_ONCE(fdb->dst)
- Split patches into (a) adding the bridge helpers (b) making DSA use them
- br_mdb_replay went back to the v1 approach where it allocated memory
in atomic context
- Created a br_switchdev_mdb_populate which reduces some of the code
duplication
- Fixed the error message in dsa_port_clear_brport_flags
- Replaced "dsa_port_vlan_filtering(dp, br, extack)" with
"dsa_port_vlan_filtering(dp, br_vlan_enabled(br), extack)" (duh)
- Added review tags (sorry if I missed any)
The objective of this series is to make LAG uppers on top of switchdev
ports work regardless of which order we link interfaces to their masters
(first make the port join the LAG, then the LAG join the bridge, or the
other way around).
There was a design decision to be made in patches 2-4 on whether we
should adopt the "push" model (which attempts to solve the problem
centrally, in the bridge layer) where the driver just calls:
switchdev_bridge_port_offloaded(brport_dev,
&atomic_notifier_block,
&blocking_notifier_block,
extack);
and the bridge just replays the entire collection of switchdev port
attributes and objects that it has, in some predefined order and with
some predefined error handling logic;
or the "pull" model (which attempts to solve the problem by giving the
driver the rope to hang itself), where the driver, apart from calling:
switchdev_bridge_port_offloaded(brport_dev, extack);
has the task of "dumpster diving" (as Tobias puts it) through the bridge
attributes and objects by itself, by calling:
- br_vlan_replay
- br_fdb_replay
- br_mdb_replay
- br_vlan_enabled
- br_port_flag_is_set
- br_port_get_stp_state
- br_multicast_router
- br_get_ageing_time
(not necessarily all of them, and not necessarily in this order, and
with driver-defined error handling).
Even though I'm not in love myself with the "pull" model, I chose it
because there is a fundamental trick with replaying switchdev events
like this:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0 <- this will replay the objects once for
the bond0 bridge port, and the swp0
switchdev port will process them
ip link set swp1 master bond0 <- this will replay the objects again for
the bond0 bridge port, and the swp1
switchdev port will see them, but swp0
will see them for the second time now
Basically I believe that it is implementation defined whether the driver
wants to error out on switchdev objects seen twice on a port, and the
bridge should not enforce a certain model for that. For example, for FDB
entries added to a bonding interface, the underling switchdev driver
might have an abstraction for just that: an FDB entry pointing towards a
logical (as opposed to physical) port. So when the second port joins the
bridge, it doesn't realy need to replay FDB entries, since there is
already at least one hardware port which has been receiving those
events, and the FDB entries don't need to be added a second time to the
same logical port.
In the other corner, we have the drivers that handle switchdev port
attributes on a LAG as individual switchdev port attributes on physical
ports (example: VLAN filtering). In fact, the switchdev_handle_port_attr_set
helper facilitates this: it is a fan-out from a single orig_dev towards
multiple lowers that pass the check_cb().
But that's the point: switchdev_handle_port_attr_set is just a helper
which the driver _opts_ to use. The bridge can't enforce the "push"
model, because that would assume that all drivers handle port attributes
in the same way, which is probably false.
For this reason, I preferred to go with the "pull" mode for this patch
set. Just to see how bad it is for other switchdev drivers to copy-paste
this logic, I added the pull support to ocelot too, and I think it's
pretty manageable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The premise of this change is that the switchdev port attributes and
objects offloaded by ocelot might have been missed when we are joining
an already existing bridge port, such as a bonding interface.
The patch pulls these switchdev attributes and objects from the bridge,
on behalf of the 'bridge port' net device which might be either the
ocelot switch interface, or the bonding upper interface.
The ocelot_net.c belongs strictly to the switchdev ocelot driver, while
ocelot.c is part of a library shared with the DSA felix driver.
The ocelot_port_bridge_leave function (part of the common library) used
to call ocelot_port_vlan_filtering(false), something which is not
necessary for DSA, since the framework deals with that already there.
So we move this function to ocelot_switchdev_unsync, which is specific
to the switchdev driver.
The code movement described above makes ocelot_port_bridge_leave no
longer return an error code, so we change its type from int to void.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the DSA situation, ocelot supports LAG offload but treats
this scenario improperly:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
We do the same thing as we do there, which is to simulate a 'bridge join'
on 'lag join', if we detect that the bonding upper has a bridge upper.
Again, same as DSA, ocelot supports software fallback for LAG, and in
that case, we should avoid calling ocelot_netdevice_changeupper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we join an already-created bridge port, such as a bond master
interface, then we can miss the initial switchdev notifications emitted
by the bridge for this port, while it wasn't offloaded by anybody.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA currently assumes that the bridge port starts off with this
constellation of bridge port flags:
- learning on
- unicast flooding on
- multicast flooding on
- broadcast flooding on
just by virtue of code copy-pasta from the bridge layer (new_nbp).
This was a simple enough strategy thus far, because the 'bridge join'
moment always coincided with the 'bridge port creation' moment.
But with sandwiched interfaces, such as:
br0
|
bond0
|
swp0
it may happen that the user has had time to change the bridge port flags
of bond0 before enslaving swp0 to it. In that case, swp0 will falsely
assume that the bridge port flags are those determined by new_nbp, when
in fact this can happen:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set bond0 type bridge_slave learning off
ip link set swp0 master br0
Now swp0 has learning enabled, bond0 has learning disabled. Not nice.
Fix this by "dumpster diving" through the actual bridge port flags with
br_port_flag_is_set, at bridge join time.
We use this opportunity to split dsa_port_change_brport_flags into two
distinct functions called dsa_port_inherit_brport_flags and
dsa_port_clear_brport_flags, now that the implementation for the two
cases is no longer similar. This patch also creates two functions called
dsa_port_switchdev_sync and dsa_port_switchdev_unsync which collect what
we have so far, even if that's asymmetrical. More is going to be added
in the next patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a pretty noisy change that was broken out of the larger change
for replaying switchdev attributes and objects at bridge join time,
which is when these extack objects are actually used.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA can properly detect and offload this sequence of operations:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set swp0 master bond0
ip link set bond0 master br0
But not this one:
ip link add br0 type bridge
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
Actually the second one is more complicated, due to the elapsed time
between the enslavement of bond0 and the offloading of it via swp0, a
lot of things could have happened to the bond0 bridge port in terms of
switchdev objects (host MDBs, VLANs, altered STP state etc). So this is
a bit of a can of worms, and making sure that the DSA port's state is in
sync with this already existing bridge port is handled in the next
patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently this simple setup with DSA:
ip link add br0 type bridge vlan_filtering 1
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
will not work because the bridge has created the PVID in br_add_if ->
nbp_vlan_init, and it has notified switchdev of the existence of VLAN 1,
but that was too early, since swp0 was not yet a lower of bond0, so it
had no reason to act upon that notification.
We need a helper in the bridge to replay the switchdev VLAN objects that
were notified since the bridge port creation, because some of them may
have been missed.
As opposed to the br_mdb_replay function, the vg->vlan_list write side
protection is offered by the rtnl_mutex which is sleepable, so we don't
need to queue up the objects in atomic context, we can replay them right
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a switchdev port starts offloading a LAG that is already in a
bridge and has an FDB entry pointing to it:
ip link set bond0 master br0
bridge fdb add dev bond0 00:01:02:03:04:05 master static
ip link set swp0 master bond0
the switchdev driver will have no idea that this FDB entry is there,
because it missed the switchdev event emitted at its creation.
Ido Schimmel pointed this out during a discussion about challenges with
switchdev offloading of stacked interfaces between the physical port and
the bridge, and recommended to just catch that condition and deny the
CHANGEUPPER event:
https://lore.kernel.org/netdev/20210210105949.GB287766@shredder.lan/
But in fact, we might need to deal with the hard thing anyway, which is
to replay all FDB addresses relevant to this port, because it isn't just
static FDB entries, but also local addresses (ones that are not
forwarded but terminated by the bridge). There, we can't just say 'oh
yeah, there was an upper already so I'm not joining that'.
So, similar to the logic for replaying MDB entries, add a function that
must be called by individual switchdev drivers and replays local FDB
entries as well as ones pointing towards a bridge port. This time, we
use the atomic switchdev notifier block, since that's what FDB entries
expect for some reason.
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have a system with DSA ports, and udhcpcd is configured to bring
interfaces up as soon as they are created.
I create a bridge as follows:
ip link add br0 type bridge
As soon as I create the bridge and udhcpcd brings it up, I also have
avahi which automatically starts sending IPv6 packets to advertise some
local services, and because of that, the br0 bridge joins the following
IPv6 groups due to the code path detailed below:
33:33:ff:6d:c1:9c vid 0
33:33:00:00:00:6a vid 0
33:33:00:00:00:fb vid 0
br_dev_xmit
-> br_multicast_rcv
-> br_ip6_multicast_add_group
-> __br_multicast_add_group
-> br_multicast_host_join
-> br_mdb_notify
This is all fine, but inside br_mdb_notify we have br_mdb_switchdev_host
hooked up, and switchdev will attempt to offload the host joined groups
to an empty list of ports. Of course nobody offloads them.
Then when we add a port to br0:
ip link set swp0 master br0
the bridge doesn't replay the host-joined MDB entries from br_add_if,
and eventually the host joined addresses expire, and a switchdev
notification for deleting it is emitted, but surprise, the original
addition was already completely missed.
The strategy to address this problem is to replay the MDB entries (both
the port ones and the host joined ones) when the new port joins the
bridge, similar to what vxlan_fdb_replay does (in that case, its FDB can
be populated and only then attached to a bridge that you offload).
However there are 2 possibilities: the addresses can be 'pushed' by the
bridge into the port, or the port can 'pull' them from the bridge.
Considering that in the general case, the new port can be really late to
the party, and there may have been many other switchdev ports that
already received the initial notification, we would like to avoid
delivering duplicate events to them, since they might misbehave. And
currently, the bridge calls the entire switchdev notifier chain, whereas
for replaying it should just call the notifier block of the new guy.
But the bridge doesn't know what is the new guy's notifier block, it
just knows where the switchdev notifier chain is. So for simplification,
we make this a driver-initiated pull for now, and the notifier block is
passed as an argument.
To emulate the calling context for mdb objects (deferred and put on the
blocking notifier chain), we must iterate under RCU protection through
the bridge's mdb entries, queue them, and only call them once we're out
of the RCU read-side critical section.
There was some opportunity for reuse between br_mdb_switchdev_host_port,
br_mdb_notify and the newly added br_mdb_queue_one in how the switchdev
mdb object is created, so a helper was created.
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME attribute is only emitted from:
sysfs/ioctl/netlink
-> br_set_ageing_time
-> __set_ageing_time
therefore not at bridge port creation time, so:
(a) switchdev drivers have to hardcode the initial value for the address
ageing time, because they didn't get any notification
(b) that hardcoded value can be out of sync, if the user changes the
ageing time before enslaving the port to the bridge
We need a helper in the bridge, such that switchdev drivers can query
the current value of the bridge ageing time when they start offloading
it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may happen that we have the following topology with DSA or any other
switchdev driver with LAG offload:
ip link add br0 type bridge stp_state 1
ip link add bond0 type bond
ip link set bond0 master br0
ip link set swp0 master bond0
ip link set swp1 master bond0
STP decides that it should put bond0 into the BLOCKING state, and
that's that. The ports that are actively listening for the switchdev
port attributes emitted for the bond0 bridge port (because they are
offloading it) and have the honor of seeing that switchdev port
attribute can react to it, so we can program swp0 and swp1 into the
BLOCKING state.
But if then we do:
ip link set swp2 master bond0
then as far as the bridge is concerned, nothing has changed: it still
has one bridge port. But this new bridge port will not see any STP state
change notification and will remain FORWARDING, which is how the
standalone code leaves it in.
We need a function in the bridge driver which retrieves the current STP
state, such that drivers can synchronize to it when they may have missed
switchdev events.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Problem:
The "lapb_t1timer_running" function in "lapb_timer.c" is used in only
one place: in the "lapb_kick" function in "lapb_out.c". "lapb_kick" calls
"lapb_t1timer_running" to check if the timer is already pending, and if
it is not, schedule it to run.
However, if the timer has already fired and is running, and is waiting to
get the "lapb->lock" lock, "lapb_t1timer_running" will not detect this,
and "lapb_kick" will then schedule a new timer. The old timer will then
abort when it sees a new timer pending.
I think this is not right. The purpose of "lapb_kick" should be ensuring
that the actual work of the timer function is scheduled to be done.
If the timer function is already running but waiting for the lock,
"lapb_kick" should not abort and reschedule it.
Changes made:
I added a new field "t1timer_running" in "struct lapb_cb" for
"lapb_t1timer_running" to use. "t1timer_running" will accurately reflect
whether the actual work of the timer is pending. If the timer has fired
but is still waiting for the lock, "t1timer_running" will still correctly
reflect whether the actual work is waiting to be done.
The old "t1timer_stop" field, whose only responsibility is to ask a timer
(that is already running but waiting for the lock) to abort, is no longer
needed, because the new "t1timer_running" field can fully take over its
responsibility. Therefore "t1timer_stop" is deleted.
"t1timer_running" is not simply a negation of the old "t1timer_stop".
At the end of the timer function, if it does not reschedule itself,
"t1timer_running" is set to false to indicate that the timer is stopped.
For consistency of the code, I also added "t2timer_running" and deleted
"t2timer_stop".
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a couple of break statements instead of
just letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A bunch of header comments were showing warnings when compiling
with W=1. Fix them all at once. This changes only comments.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Correct reported warnings for "warning: expecting prototype for ...
Prototype was for ... instead"
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Report the driver name, ASIC ID and the switch name via devlink. This is a
useful information for user space tooling.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Split flowtable workqueues per events, from Oz Shlomo.
2) fall-through warnings for clang, from Gustavo A. R. Silva
3) Remove unused declaration in conntrack, from YueHaibing.
4) Consolidate skb_try_make_writable() in flowtable datapath,
simplify some of the existing codebase.
5) Call dst_check() to fall back to static classic forwarding path.
6) Update table flags from commit phase.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding CONFIG_PCPU_DEV_REFCNT, I forgot that the
initial net device refcount was 0.
When CONFIG_PCPU_DEV_REFCNT is not set, this means
the first dev_hold() triggers an illegal refcount
operation (addition on 0)
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x128/0x1a4
Fix is to change initial (and final) refcount to be 1.
Also add a missing kerneldoc piece, as reported by
Stephen Rothwell.
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <groeck@google.com>
Tested-by: Guenter Roeck <groeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-switch: offload bridge port flags to device
Add support for offloading bridge port flags to the switch. With this
patch set, the learning, broadcast flooding and unknown ucast/mcast
flooding states will be user configurable.
Apart from that, the last patch is a small fix that configures the
offload_fwd_mark if the switch port is under a bridge or not.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If a switch port is under a bridge, the offload_fwd_mark should be setup
before sending the skb towards the stack so that the bridge does not try
to flood the packet on the other switch ports.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring per port unknown flooding by accepting both
BR_FLOOD and BR_MCAST_FLOOD as offloadable bridge port flags.
The DPAA2 switch does not support at the moment configuration of unknown
multicast flooding independently of unknown unicast flooding, therefore
check that both BR_FLOOD and BR_MCAST_FLOOD have the same state.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BR_BCAST_FLOOD bridge port flag is now accepted by the driver and a
change in its state will determine a reconfiguration of the broadcast
egress flooding list on the FDB associated with the port.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring the learning state of a switch port.
When the user requests the HW learning to be disabled, a fast-age
procedure on that specific port is run so that previously learnt
addresses do not linger.
At device probe as well as on a bridge leave action, the ports are
configured with HW learning disabled since they are basically a
standalone port.
At the same time, at bridge join we inherit the bridge port BR_LEARNING
flag state and configure it on the switch port.
There were already some MC firmware ABI functions for changing the
learning state, but those were per FDB (bridging domain) and not per
port so we need to adjust those to use the new MC fw command which is
per port.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso