UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
+ OCMEM support to enable the couple generations that had shared OCMEM
rather than GMEM exclusively for the GPU (late a3xx and I think basically
all of a4xx). Bjorn and Brian decided to land this through the drm
tree to avoid having to coordinate merge requests.
+ a510 support, and various associated display support
+ the usual misc cleanups and fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv-JWswEJRxe5AmnGQO1SZnpxK05kO1E29K6UUzC9GMMw@mail.gmail.com
Use the function drm_panel_get_modes().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: Enrico Weigelt <info@metux.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-7-sam@ravnborg.org
Add the configuration entries for the MDP5 v1.11, found on
MSM8956, MSM8976 and APQ variants.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some SoCs, like MSM8956/8976 (and APQ variants), do feature these
clocks and we need to enable them in order to get both of the
hw (mdp5/rot) Translation Buffer Units (TBUs) to properly work.
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
A number of the config structs are not exported so make
them static to avoid the following sparse warnings:
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:17:26: warning: symbol 'msm8x74v1_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:101:26: warning: symbol 'msm8x74v2_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:183:26: warning: symbol 'apq8084_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:278:26: warning: symbol 'msm8x16_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:345:26: warning: symbol 'msm8x94_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:440:26: warning: symbol 'msm8x96_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:548:26: warning: symbol 'msm8917_config' was not declared. Should it be static?
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c:633:26: warning: symbol 'msm8998_config' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009120522.17019-1-ben.dooks@codethink.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20190918195722.2149227-1-arnd@arndb.de
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c: In function modeset_init:
drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c:458:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable]
It is not used since commit 36d1364abb ("drm/msm/mdp5:
Clean up interface assignment")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1570630403-92371-1-git-send-email-zhengbin13@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c: In function blend_setup:
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c:225:28: warning: variable hw_cfg set but not used [-Wunused-but-set-variable]
It is not used since commit 14be3200cd ("drm/msm: rename mdp->disp")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-3-git-send-email-zhengbin13@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function mdp5_smp_calculate:
drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:134:6: warning: variable fmt set but not used [-Wunused-but-set-variable]
It is not used since commit 24c478ead0 ("drm/fourcc:
Pass the format_info pointer to drm_format_plane_cpp")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1570690506-83287-2-git-send-email-zhengbin13@huawei.com
As Daniel mentions in his email [1], non-blocking commits don't hold the
modeset locks, so we can safely access state as long as these functions
are in the commit path. So remove the WARN_ON in dpu_kms_encoder_enable.
In dpu_crtc_get_intf_mode, things are a bit more complicated. So keep
the WARN_ON, but add a comment explaining the situation and hope someone
comes along and fixes the issue.
[1]- https://lists.freedesktop.org/archives/dri-devel/2019-October/239441.html
Link to v1: https://patchwork.freedesktop.org/patch/msgid/20191010151351.126735-1-sean@poorly.run
Changes in v2:
- Restored the WARN_ON in get_intf_mode and added a clarifying comment (Daniel)
Fixes: 1dfdb0e107 ("drm/msm: dpu: Add modeset lock checks where applicable")
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010181801.186069-1-sean@poorly.run
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_virt_disable:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1199:27: warning: variable mode set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function _dpu_encoder_init_debugfs:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1963:18: warning: variable dpu_kms set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function dpu_encoder_frame_done_timeout:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:2183:26: warning: variable priv set but not used [-Wunused-but-set-variable]
They are not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_ctl_start_irq:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:136:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_irq_control:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:328:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_tearcheck_config:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:367:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c: In function dpu_encoder_phys_cmd_wait_for_tx_complete:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:662:31: warning: variable cmd_enc set but not used [-Wunused-but-set-variable]
They are not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_release_bw:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:248:25: warning: variable dpu_cstate set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c: In function dpu_core_perf_crtc_update:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c:337:26: warning: variable priv set but not used [-Wunused-but-set-variable]
They are not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_preinstall:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:354:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c: In function dpu_core_irq_uninstall:
drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.c:390:26: warning: variable priv set but not used [-Wunused-but-set-variable]
It is not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c: In function dpu_encoder_phys_vid_disable:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:566:26: warning: variable priv set but not used [-Wunused-but-set-variable]
It is not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_danger_signal_status:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:80:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:26: warning: variable priv set but not used [-Wunused-but-set-variable]
It is not used since commit 25fdd5933e ("drm/msm:
Add SDM845 DPU support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The arguments related to IOMMU port name have been unused since
commit 944fc36c31 ("drm/msm: use upstream iommu") and can be removed.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
dpu_kms.dev will never be NULL, so don't bother checking.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_drm_private.kms will only be NULL in the dummy headless case, so
there is no need to check it in the dpu display driver.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm_crtc.dev will never be NULL, so no need to check it.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm_device.dev_private is set to a non-NULL msm_drm_private
struct in msm_drm_init. Successful initialization of msm means
that dev_private is non-NULL so there is no need to check it
everywhere.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We haven't done any backmerge for a while due to the merge window, and it
starts to become an issue for komeda. Let's bring 5.4-rc1 in.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.
Signed-off-by: Denis Efremov <efremov@linux.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In addition, moving to kms->flush_commit() lets us drop the only user
of kms->commit().
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
With atomic commit, ->prepare_commit() and ->complete_commit() may not
be evenly balanced (although ->complete_commit() will complete each
crtc that had been previously prepared). So these will no longer be
a good place to enable/disable clocks needed for hw access.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends
should migrate writing flush registers to this hook, so we can decouple
pushing updates to hardware, and flushing the updates.
Once we add async commit support, the hw updates will be pushed down to
the hw synchronously, but flushing the updates will be deferred until as
close to vblank as possible, so that multiple updates can be combined in
a single frame.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Prep work for async commits, in which case this will be called after we
no longer have the atomic state object.
This drops some wait_for_vblanks(), but those should be unnecessary, as
we call this after waiting for flush to complete.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
First step in re-working the atomic related internal API to prepare for
async updates pending.. ->wait_flush() is intended to block until there
is no in-progress flush.
A crtc_mask is used, rather than an atomic state object, as this will
later be used for async flush after the atomic state is destroyed.
This replaces ->wait_for_crtc_commit_done()
v2: update for review comments
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously the callback was called from whoever called wait_for_vblank(),
but that isn't a great plan when wait_for_vblank() stops getting called,
and results in frame_done_timer expiring.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Just waiting for next vblank isn't ideal.. we should really be looking
at the hw FLUSH register value to know if there is still an in-progress
flush without stalling unnecessarily when there is no pending flush.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
It attempted to avoid fps drops in the presence of cursor updates. But
it is racing, and can result in hw updates after flush before vblank,
which leads to underruns.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The extra line-break in traces was annoying me.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Previously, dpu_crtc_frame_event_work() would try to aquire all the
modeset locks in order to check whether it can release bandwidth. (If
we only have cmd-mode display, bandwidth can be released at frame-done
time.)
The problem with this is that it is also responsible for signalling
frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is
already a frame pending. This is called in the msm_atomic_commit_tail()
path.. which means that for non-nonblock commits, at least some of the
modeset locks are already held.
Re-work this scheme to use a reference count to track our need to have
clocks enabled. It is incremented for each atomic commit, and
decremented in the corresponding frame-done. Additionally, any crtc
used in video mode hold an extra reference while they are enabled. The
net effect is that we can determine in frame-done whether it is safe to
drop bandwidth without needing to aquire any modeset locks.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Sean Paul <sean@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Creating the msm gem address space requires a reference to the dev where
the iommu is located. The driver currently assumes this is the same as
the platform device, which breaks when the iommu is outside of the
platform device (ie in the parent). Default to using the platform device,
but check to see if that has an iommu reference, and if not, use the parent
device instead. This should handle all the various iommu designs for
mdp5 supported systems.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add support for MDP5 version v3.0 found on msm8998.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
[silence unitialized variable warnings]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Unused and the extra rpm get/put interferes with handover from
bootloader (ie. happens before we have a chance to check if
things are already enabled).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The DPU has some kind of idea that it wants to be able to
bring up power using GPIO lines. The struct dss_gpio is however
completely unused and should this be done, it should be done
using the GPIO descriptor framework rather than this API
which relies on the global GPIO numberspace. Delete this
code before anyone hurt themselves.
The inclusion of <linux/gpio.h> was abused to get some OF
and IRQ headers implicitly included into the DPU utilities,
make these includes explicit and push them down into the actual
implementation.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This file is not using any symbols from <linux/gpio.h> so just
drop this include.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Drop the deprecated drmP.h header file, and trim msm_drv.h
to the relevant include files.
This resulted in a suprisingly many edits as many files relied
on headers included via msm_drv.h.
But msm_drv.h is not supposed to carry include files it do not need, so
the individual files have to include what extra they needs.
v2:
- Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Bruce Wang <bzwang@chromium.org>
Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Carsten Behling <carsten.behling@googlemail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Todor Tomov <todor.tomov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXUwPUAAKCRDj7w1vZxhR
xQ4lAQDK2ijx29YHeZspbOwP4Nwq95DFs1uQcSm5GvbRt1JSowD9EwkLeNfkPkel
Xv1Ts/Frgq7ckH2e2zkLPyCOFCHd0wA=
=rIUl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.4:
UAPI Changes:
- HDCP: Add a Content protection type property
Cross-subsystem Changes:
Core Changes:
- Continue to rework the include dependencies
- fb: Remove the unused drm_gem_fbdev_fb_create function
- drm-dp-helper: Make the link rate calculation more tolerant to
non-explicitly defined, yet supported, rates
- fb-helper: Map DRM client buffer only when required, and instanciate a
shadow buffer when the device has a dirty function or says so
- connector: Add a helper to link the DDC adapter used by that connector to
the userspace
- vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout
- dma-buf: Fix a stack corruption
- ttm: Embed a drm_gem_object struct to make ttm_buffer_object a
superclass of GEM, and convert drivers to use it.
- hdcp: Improvements to report the content protection type to the
userspace
Driver Changes:
- Remove drm_gem_prime_import/export from being defined in the drivers
- Drop DRM_AUTH usage from drivers
- Continue to drop drmP.h
- Convert drivers to the connector ddc helper
- ingenic: Add support for more panel-related cases
- komeda: Support for dual-link
- lima: Reduce logging
- mpag200: Fix the cursor support
- panfrost: Export GPU features register to userspace through an ioctl
- pl111: Remove the CLD pads wiring support from the DT
- rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET
macro
- sun4i: Improve support for color encoding and range
- tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny
- vkms: Rework of the CRC tracking
- bridges:
- sii902x: Add support for audio graph card
- tc358767: Rework AUX data handling code
- ti-sn65dsi86: Add Debugfs and proper DSI mode flags support
- panels
- Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech
COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191,
Boe Himax8279d, Sharp LD-D5116Z01B
- Conversion of the device tree bindings to the YAML description
- jh057n00900: Rework the enable / disable path
- fbdev:
- ssd1307fb: Support more devices based on that controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
The mdp5 drm/kms driver currently does not work on command-mode DSI
panels due to 'vblank wait timed out' errors. This causes a latency
of seconds, or tens of seconds in some cases, before content is shown
on the panel. This hardware does not have the something that we can use
as a frame counter available when running in command mode, so we need to
fall back to using timestamps by setting the max_vblank_count to zero.
This can be done on a per-CRTC basis, so the convert mdp5 to use
drm_crtc_set_max_vblank_count().
This change was tested on a LG Nexus 5 (hammerhead) phone.
Suggested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org
dpu encoder spinlock should be initialized during dpu encoder
init instead of dpu encoder setup which is part of modeset init.
Signed-off-by: Shubhashree Dhar <dhar@codeaurora.org>
[seanpaul resolved conflict in old init removal and revised the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1561357632-15361-1-git-send-email-dhar@codeaurora.org
Daniel Vetter