Commit Graph

2336 Commits

Author SHA1 Message Date
Peter Zijlstra 182a85f8a1 sched: Disable wakeup balancing
Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.

On a dual socket, quad core, dual thread nehalem system:

sysbench (--num_threads=16):

 SD_BALANCE_WAKE-: 13982 tx/s
 SD_BALANCE_WAKE+: 15688 tx/s

kbuild (-j16):

 SD_BALANCE_WAKE-: 47.648295846  seconds time elapsed   ( +-   0.312% )
 SD_BALANCE_WAKE+: 47.608607360  seconds time elapsed   ( +-   0.026% )

(same within noise)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16 16:44:33 +02:00
Paul Mundt 480c646c32 sh: Kill off unused se_skipped in alignment trap notification code.
Nothing is using this, resulting in a build error with certain
configurations. Just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-16 15:06:39 +09:00
Paul Mundt a74f7e0410 sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
This is necessary to get ftrace syscall tracing working again.. a fairly
trivial and mechanical change. The one benefit is that this can also be
enabled on sh64, despite not having its own ftrace port.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-16 14:30:34 +09:00
Paul Mundt ea88023b34 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	arch/sh/kernel/vmlinux.lds.S
2009-09-16 13:48:32 +09:00
Linus Torvalds ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Peter Zijlstra b8a543ea5a sched: Reduce forkexec_idx
If we're looking to place a new task, we might as well find the
idlest position _now_, not 1 tick ago.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:23 +02:00
Mike Galbraith 0ec9fab3d1 sched: Improve latencies and throughput
Make the idle balancer more agressive, to improve a
x264 encoding workload provided by Jason Garrett-Glaser:

 NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 252.82 fps, 22096.60 kb/s
 encoded 600 frames, 250.69 fps, 22096.60 kb/s
 encoded 600 frames, 245.76 fps, 22096.60 kb/s

 NO_NEXT_BUDDY LB_BIAS
 encoded 600 frames, 344.44 fps, 22096.60 kb/s
 encoded 600 frames, 346.66 fps, 22096.60 kb/s
 encoded 600 frames, 352.59 fps, 22096.60 kb/s

 NO_NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 425.75 fps, 22096.60 kb/s
 encoded 600 frames, 425.45 fps, 22096.60 kb/s
 encoded 600 frames, 422.49 fps, 22096.60 kb/s

Peter pointed out that this is better done via newidle_idx,
not via LB_BIAS, newidle balancing should look for where
there is load _now_, not where there was load 2 ticks ago.

Worst-case latencies are improved as well as no buddies
means less vruntime spread. (as per prior lkml discussions)

This change improves kbuild-peak parallelism as well.

Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253011667.9128.16.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:51:16 +02:00
Peter Zijlstra 78e7ed53c9 sched: Tweak wake_idx
When merging select_task_rq_fair() and sched_balance_self() we lost
the use of wake_idx, restore that and set them to 0 to make wake
balancing more aggressive.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:07 +02:00
Peter Zijlstra c88d591089 sched: Merge select_task_rq_fair() and sched_balance_self()
The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.

To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().

Modify sched_balance_self() to:

  - update_shares() when walking up the domain tree,
    (it only called it for the top domain, but it should
     have done this anyway), which allows us to remove
    this ugly bit from try_to_wake_up().

  - do wake_affine() on the smallest domain that contains
    both this (the waking) and the prev (the wakee) cpu for
    WAKE invocations.

Then use the top-down balance steps it had to replace wake_idle().

This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.

SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.

Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15 16:01:05 +02:00
Phil Edworthy a6f15ade97 video: sh_mobile_lcdcfb: use both register sets for display panning
Switch to using both register sets - side A and side B for display panning.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 21:08:22 +09:00
Paul Mundt c8c2df9055 sh: Fix up sh7705 flush_dcache_page() build.
Type mismatch caused the page deref to blow up, fix it up as per the sh4
change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:47:35 +09:00
Kuninori Morimoto bb7001b501 sh: kfr2r09: document the PLL/FLL <-> RF relationship.
Early clock initialization sets up PLL/FLL values for optimal RF
behaviour. As this relationship is presently undocumented, we document
this in the script so the rationale is apparent.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:38:55 +09:00
Kuninori Morimoto a991801a70 sh: mach-ecovec24: need asm/clock.h.
Fixes up build failures.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:34:44 +09:00
Kuninori Morimoto 147df2d68f sh: mach-ecovec24: deassert usb irq on boot.
This patch prevents the USB1 interrupt from remaining asserted
immediately after re-boot or during a jump in to a secondary kernel.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:34:06 +09:00
Kuninori Morimoto e9103e7490 sh: Add KEYSC support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:30:46 +09:00
Kuninori Morimoto 1f85d38106 sh: add kycr2_delay for sh_keysc
After KYCR2 is set, udelay might become necessary if there are only a
small number of keys attached. This patch introduces an optional delay
through the platform data to address this problem.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:30:14 +09:00
Paul Mundt 033eb0acdd sh: cpufreq: Include CPU id in info messages.
This tidies up the printks when running on SMP, and aids in debugging
when certain cores are unable to be scaled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15 09:26:04 +09:00
Linus Torvalds d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Paul Mundt 3639dfb57d sh: multi-evt support for SH-X3 proto CPU.
This adds support for multiple vectors per unique IRQ masking source on
the SH-X3 proto CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-14 17:29:35 +09:00
Rafael Ignacio Zurita 2fd5a02107 sh: clkfwk: remove bogus set_bus_parent() from SH7709.
This fixes up broken clock re-parenting undertaken by the SH7709 clock
framework code, which is currently in conflict with the legacy CPG
framework. With this change in place, the legacy CPG ancestry is used,
and we manage to avoid contending on the clock_list_sem mutex, which is
already held under the legacy registration path, resulting in livelock.

In order for SH7709 to fully support the varying clock modes, it needs to
implement a more complete clock framework. After this change it is in
sync with legacy CPG mode, which ends up being the default configuration
for this CPU anyways.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-14 14:09:00 +09:00
Yusuke Goda 6a78ec16ca sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300)
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:23 +09:00
Kuninori Morimoto 094f7bd80c sh: Add EcoVec24 romImage defconfig
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:18 +09:00
Kuninori Morimoto c386cff1bf sh: USB disable process is needed if romImage boot for EcoVec24
when you use romImage on EcoVec24, 1st Linux will enable USB device.
But no-one disable it.
So re-started Linux will get interrupt before USB driver is attached.
This patch disable USB device at first

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:18 +09:00
Kuninori Morimoto 643e9d1095 sh: EcoVec24: add HIZA setting for LED
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:18 +09:00
Kuninori Morimoto 4907d57f76 sh: EcoVec24: write MAC address in boot
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:18 +09:00
Kuninori Morimoto be4ebf999a sh: Add romImage support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:17 +09:00
Kuninori Morimoto 378a569eaa sh: add romimage-macros.h
romimage macros which are used in kfr2r09 is very useful for other board.
This patch divides kfr2r09's romimage.h into
romimage-macros and partner-jet-setup.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:16 +09:00
Kuninori Morimoto 125ecce696 sh: Add I2C device support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11 13:19:02 +09:00
Alex Chiang a7db504052 PCI: remove pcibios_scan_all_fns()
This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:18 -07:00
Paul Mundt 682f88ab74 sh: Cleanup whitespace damage in sh4_flush_icache_range().
There was quite a lot of tab->space damage done here from a former patch,
clean it up once and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 13:19:46 +09:00
Nobuhiro Iwamatsu d8902adcc1 dmaengine: sh: Add Support SuperH DMA Engine driver
This supported all DMA channels, and it was tested in SH7722,
SH7780, SH7785 and SH7763.
This can not use with SH DMA API.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:56:02 -07:00
Paul Mundt a2494b9b5f sh: Kill off dcache writeback from copy_page().
Now that the cache purging is handled manually by all copy_page()
callers, we can kill off copy_page()'s on writeback. This optimizes the
non-aliasing case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08 16:23:08 +09:00
Paul Mundt 6e4154d4c2 sh: Use more aggressive dcache purging in kmap teardown.
This fixes up a number of outstanding issues observed with old mappings
on the same colour hanging around. This requires some more optimal
handling, but is a safe fallback until all of the corner cases have been
handled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08 16:21:00 +09:00
Paul Mundt 0906a3ad33 sh: Fix up and optimize the kmap_coherent() interface.
This fixes up the kmap_coherent/kunmap_coherent() interface for recent
changes both in the page fault path and the shared cache flushers, as
well as adding in some optimizations.

One of the key things to note here is that the TLB flush itself is
deferred until the unmap, and the call in to update_mmu_cache() itself
goes away, relying on the regular page fault path to handle the lazy
dcache writeback if necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-03 17:21:10 +09:00
David Howells ee18d64c1f KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:22 +10:00
Paul Mundt d1af119a69 sh: Fix up build warning for SH7785LCR proto board.
This fixes up a build warning introduced by the proto board resource
changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 22:38:27 +09:00
Paul Mundt 5010c4f7e6 sh: disable trapped I/O on SH7785LCR.
This board doesn't use trapped I/O for anything, so just kill off the
select. This was causing problems in the unhandled page fault die path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 22:37:10 +09:00
Paul Mundt 6f3795788b sh: Fix up UP deadlock with SMP-aware cache ops.
This builds on top of the previous reversion and implements a special
on_each_cpu() variant that simple disables preemption across the call
while leaving the interrupt state to the function itself. There were some
unintended consequences with IRQ disabling in some of these paths on UP
that ran in to a deadlock scenario with IRQs being missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 21:21:36 +09:00
Paul Mundt 983f4c514c Revert "sh: Kill off now redundant local irq disabling."
This reverts commit 64a6d72213.

Unfortunately we can't use on_each_cpu() for all of the cache ops, as
some of them only require preempt disabling. This seems to be the same
issue that impacts the mips r4k caches, where this code was based on.
This fixes up a deadlock that showed up in some IRQ context cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 21:12:55 +09:00
Paul Mundt ade315d83c sh: Kill off kgdb's magical NMI debouncing.
The kgdb stub has traditionally tied in to the NMI slot, and manually
handled debounce. Now that we have a generic way to do this instead, all
of the stub-specific debounce silliness can be killed off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 17:45:35 +09:00
Paul Mundt 1e1030dccb sh: nmi_debug support.
This implements support for NMI debugging that was shamelessly copied
from the avr32 port. A bit of special magic is needed in the interrupt
exception path given that the NMI exception handler is stubbed in to the
regular exception handling table despite being reported in INTEVT. So we
mangle the lookup and kick off an EXPEVT-style exception dispatch from
the INTEVT path for exceptions that do_IRQ() has no chance of handling.
As a result, we also drop the evt2irq() conversion from the do_IRQ() path
and just do it in assembly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 17:38:32 +09:00
Paul Mundt ac6a0cf671 Merge branch 'master' into sh/smp
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-09-01 13:54:14 +09:00
Matt Fleming ce3f7cb96e sh: Fix dcache flushing for N-way write-through caches.
This adopts the special-cased 2-way write-through dcache flusher for
N-ways and moves it in to the generic path. Assignment is done at runtime
via the check for the CCR_CACHE_WT bit in the same path as the per-way
writeback flushers.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01 13:32:48 +09:00
Paul Mundt 2f6dafc5fc sh: unwinder: Fix up uninitialized variable warnings on sh2a build.
A couple of these popped up on the sh2a build, causing build failures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-31 13:47:06 +09:00
Matt Fleming 4aa5ac4ef4 sh: Only shout about fixing up unexpected unaligned accesses
Some unaligned accesses are completely expected. For example, the
trapped_io code uses the unaligned access fixup code path so there's no
need to warn about having to fixup the unaligned access.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-29 20:31:44 +09:00
Yoshihiro Shimoda 4923576b8a net: sh_eth: add value of ether_link pin in platform_data
The method of ETHER_LINK pin is board dependence.
This patch adding paramters are:
 - no_ether_link          : If set to 1, do not use ETHER_LINK
 - ether_link_active_low  : If set to 1, ETHER_LINK is active low.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:19:35 -07:00
Yoshihiro Shimoda e79d57479c sh: sh7785lcr: fix prototype board on 32bit MMU mode.
Fix up PCA9564 resources on 32bit MMU mode using prototype board.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Raul Porcel <armin76@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28 10:19:13 +09:00
Paul Mundt f840dd5e74 sh: Tidy up watchdog build for SH-2.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28 10:19:12 +09:00
Kuninori Morimoto ea15edb292 sh: Add LCDC Panel support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto 2153ad3294 sh: Add CEU support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto fa3ba51bcf sh: Add support LCDC for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:10 +09:00
Kuninori Morimoto 907050a33d sh: Add USB support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto 35a3540891 sh: Add SH-ETH support for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto b7056bc194 sh: modify to enable boot for EcoVec24
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:36:09 +09:00
Kuninori Morimoto b37c7c66f0 sh: fix CPU_SH7723/7724 numbering bug
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:35:46 +09:00
Paul Mundt e76a0136a3 sh: Fix up sh4_flush_dcache_page() build on UP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27 11:31:16 +09:00
Paul Mundt c68e320686 sh: Fix an off-by-1 in FTRACE_SYSCALL_MAX.
This is supposed to be the equivalent of __NR_syscalls, not
__NR_syscalls -1. The x86 code this was based on had simply fallen
out of sync at the time this was implemented. Fix it up now.

As a result, tracing of __NR_perf_counter_open works as advertised.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-25 18:39:33 +09:00
Paul Mundt 0ceb4c3e3f timekeeping: Fix up read_persistent_clock() breakage on sh
The recent commit "timekeeping: Increase granularity of
read_persistent_clock()" introduced read_persistent_clock()
rework which inadvertently broke the sh conversion:

	arch/sh/kernel/time.c:45: error: passing argument 1 of 'rtc_sh_get_time' from incompatible pointer type
	distcc[13470] ERROR: compile arch/sh/kernel/time.c on sprygo/32 failed
	make[2]: *** [arch/sh/kernel/time.o] Error 1

This trivial fix gets it working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090824223239.GB20832@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-25 08:46:16 +02:00
Paul Mundt 12cceb6251 Merge branch 'sh/st-integration' 2009-08-24 22:49:17 +09:00
Paul Mundt f13327864f sh: Move the FTRACE_SYSCALL_MAX definition in to asm/ftrace.h.
Needed by ftrace changes in -tip.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 22:48:27 +09:00
Pawel Moll 05ecd5a1f7 sh: Simplify "multi-evt" interrupt handling.
This patch changes the way in which "multi-evt" interrups are handled.
The intc_evt2irq_table and related intc_evt2irq() have been removed and
the "redirecting" handler is installed for the coupled interrupts.

Thanks to that the do_IRQ() function don't have to use another level
of indirection for all the interrupts...

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 19:52:38 +09:00
Giuseppe Cavallaro 788e6af37a sh: fix sys_cacheflush error checking
sys_cacheflush should return with EINVAL if the cache parameter is not
one of ICACHE, DCACHE or BCACHE.
So, we need to include 0 in the first check.

It also adds the three definitions above as wrapper of the existent macros.

PS: ltp cacheflush01 test now passes.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:59:09 +09:00
Stuart Menefy ffad9d7a54 sh: Fix problems with cache flushing when cache is in write-through mode
Change the method used to flush the cache in write-through mode to
avoid corrupted data being written back to memory.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:39:39 +09:00
Stuart Menefy a1fce73235 sh: Fix overzealous checking in __ioremap()
Allow peripherals before the start of RAM to be remapped.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:29:25 +09:00
Stuart Menefy 6000fc4d6f sh: Fixes some write posting issues in the interrupt handling for SH
It is possible for the CPU to re-enable it's interrupt block bit
before the write to the interrupt controller has actually masked out
the external interupt at the controller. We get around this by
reading back from the interrupt controller which will ensure the
write has happened.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:27:33 +09:00
Stuart Menefy bd4fb4d4c1 sh: Fix underflow in SH udelay() code.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:18:50 +09:00
Stuart Menefy 6d243dd370 sh: Add sys_cacheflush() call for SH CPUs.
Adds a system call to allow user code to flush code from the cache.
You can use instructions for the data side, but the iside can
only be done by a flush ROM which really only works with a direct
mapped cache. The later SH4's have 2 way Iside, so this call allows
a portable way to flush the cache.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 18:16:56 +09:00
Stuart Menefy a5cf9e2444 sh: Improve comments int SH4 cache flushing code
This is a pure documentation, to try to explain why the cache flushing code
for the SH4 is implemented the way it is.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:36:24 +09:00
Stuart Menefy 5e9377ec6f sh: Optimise memcpy_to/fromio for SH4
Optimise memcpy_to/fromio. This is used extensivly by MTD, so is a
worthwhile performance gain. The main savings come from not repeatedly
calling readl/writel, and doing word instead of byte at a time
transfers. Also using "movca.l" on SH4 gives a small performance win.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:35:07 +09:00
Stuart Menefy 8af57f8b4c sh: generic_in/outs{bwl} optimizations.
After performing the port2addr conversion, and checking that the data is
correctly aligned, simply call __raw_readsX/writesX. These have already been
optimised.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:26:39 +09:00
Stuart Menefy 7d9c035150 sh: Read from CCN_PVR instead of ROM for delay.
Reading from the ROM is not a good idea as it could disturb some
flash operation that it is in progress.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:13:52 +09:00
Stuart Menefy fea966f756 sh: Remove implicit sign extension from assembler immediates
The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 17:09:53 +09:00
Pawel Moll d724a9c9d5 sh: Allow for kernel command line concatenation.
So far kernel command line arguments could be passed in by a bootloader
or defined as CONFIG_CMDLINE, which completely overwriting the first one.

This change allows a developer to declare selected kernel parameters in
a kernel configuration (eg. project-specific defconfig), retaining
possibility of passing others by a bootloader.

The obvious examples of the first type are MTD partition or
bigphysarea-like region definitions, while "debug" option or network
configuration should be given by a bootloader or a JTAG boot script.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 16:25:38 +09:00
Jon Frosdick b46373e0d4 sh: Use internal watchdog timer to perform reset
This patches will trigger a reboot using the watchdog
timer instead of double fault.  Unlike the previous
method, this one actually works in 32 bit mode.

Reset should also be cleaner.

Signed-off-by: Jon Frosdick <jon.frosdick@st.com>
Signed-off-by: Carl Shaw <carl.shaw@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 16:20:44 +09:00
Giuseppe Cavallaro 27a30f53bb sh: kgdb: do not reload VBR while handling debugger breackpoint
Save the VBR allowing GDB to dump full registers set but do not reload it
as soon as the kgdb_handle_exception is invoked.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 16:14:03 +09:00
David McKay 15444a8973 sh: Allow use of GENERIC_IOMAP
The synopsys PCI cell used in the later STMicro chips requires code to
be run in order to do IO cycles, rather than just memory mapping the IO
space. Rather than extending the existing SH infrastructure to allow
this, use the GENERIC_IOMAP implmentation to save re-inventing the
wheel.

This set of changes allows the SH to be built with GENERIC_IOMAP
enabled, it just ifdef's out the functions provided by the GENERIC_IOMAP
implementation, and provides a few required missing functions.

Signed-off-by: David McKay <david.mckay@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 16:10:40 +09:00
Carl Shaw 2fc742f8d6 sh: Improve unwind info for signals
GCC does not issue unwind information for function epilogues.
Unfortunately we can catch a signal during an epilogue.  The signal
handler writes the current context and signal return code onto the stack
overwriting previous contents.  During unwinding, libgcc can try to
restore registers from the stack and restores corrupted ones. This can
lead to segmentation, misaligned access and sigbus faults.

For example, consider the following code:

    mov.l   r12,@-r15
    mov.l   r14,@-r15
    sts.l   pr,@-r15
    mov     r15,r14

    <do stuff>

    mov r14, r15
    lds.l @r15+, pr
	<<< SIGNAL HERE
    mov.l @r15+, r14
    mov.l @r15+, r12
    rts

Unwind is aware that pr was pushed to stack in prolog, so tries to
restore it.  Unfortunately it restores the last word of the signal
handler code placed on the stack by the kernel.

This patch tries to avoid the problem by adding a guard region on the
stack between where the function pushes data and where the signal handler
pushes its return code.  We probably don't see this problem often because
exception handling unwinding in an epilogue only occurs due to a pthread
cancel signal.  Also the kernel signal stack handler alignment of 8 bytes
could hide the occurance of this problem sometimes as the stack may not
be trampled at a particular required word.

This is not guaranteed to always work.  It relies on a frame pointer
existing for the function (so it can get the correct sp value) which is
not always the case for the SH4.

Modifications will also be made to libgcc for the case where there is no
fp.

Signed-off-by: Carl Shaw <carl.shaw@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 15:07:08 +09:00
Andre Draszik 5a0ab35e43 sh: cleanup of do_address_error()
This patch fixes a few problems with the existing code in do_address_error().

a) the variable used to printk()d the offending instruction wasn't
   initialized correctly. This is a fix to bug 5727

b) behaviour for CONFIG_CPU_SH2A wasn't correct

c) the 'ignore address error' behaviour didn't update the PC, causing an
   infinite loop.

Signed-off-by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 15:01:10 +09:00
Andre Draszik 7436cde6b2 sh: Allow user control over misaligned fixup handling
This patch brings the SH4 misaligned trap handler in line with what
happens on ARM:
Add a /proc/cpu/alignment which can be read from to get alignment
trap statistics and written to to influence the behaviour of the
alignment trap handling. The value to write is a bitfield, which
has the following meaning: 1 warn, 2 fixup, 4 signal
In addition, we add a /proc/cpu/kernel_alignment, to enable or
disable warnings in case of kernel code causing alignment errors.

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 14:53:46 +09:00
Andre Draszik 9a4af027a0 sh: ratelimit unaligned fixups
This patch makes sure we see messages about unaligned access fixups
every now and then. Else especially userspace apps suffering from
bad programming won't ever be noticed...

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 14:38:27 +09:00
Paul Mundt c3144fc46f Merge branches 'sh/hwblk' and 'sh/pm-runtime' 2009-08-23 18:04:07 +09:00
Magnus Damm cc58f597af sh: drop static UIO clocks for sh7722, sh7723 and sh7724
The Runtime PM patch for UIO driver implements coarse grained
dynamic power management for UIO devices. With that patch in
place we can get rid of the static clock configuration. Which
in turn makes it possible for cpuidle to enter deeper sleep.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:21 +09:00
Magnus Damm ac2c596b57 sh: let ARCH_SHMOBILE select PM and PM_RUNTIME
With the Runtime PM driver changes in place, we must have
Runtime PM support in place. Otherwise there is no way to
enable clocks to the Runtime PM enabled hardware blocks.
This patch makes Runtime PM mandatory on SuperH Mobile.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:20 +09:00
Paul Mundt a62926fe4b sh: Fix section mismatch in platform bus notifier.
The runtime PM for SH-Mobile code had platform_bus_notify() as __devinit,
which is rather bogus. Kill off the annotation, which subsequently
silences the section mismatch warnings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:20 +09:00
Magnus Damm 6a93dde1e8 sh: Runtime PM for SuperH Mobile platform bus devices
This patch is V3 of the SuperH Mobile Runtime PM platform bus
implentation matching Rafael's Runtime PM v16.

The code gets invoked from the SuperH specific Runtime PM
platform bus functions that override the weak symbols for:
 - platform_pm_runtime_suspend()
 - platform_pm_runtime_resume()
 - platform_pm_runtime_idle()

This Runtime PM implementation performs two levels of power
management. At the time of platform bus runtime suspend the
clock to the device is stopped instantly. Later on if all
devices within the power domain has their clocks stopped
then the device driver ->runtime_suspend() callbacks are
used to save hardware register state for each device.

Device driver ->runtime_suspend() calls are scheduled from
cpuidle context using platform_pm_runtime_suspend_idle().
When all devices have been fully suspended the processor
is allowed to enter deep sleep from cpuidle.

The runtime resume operation turns on clocks and also
restores registers if needed. It is worth noting that the
devices start in a suspended state and the device driver
is responsible for calling runtime resume before accessing
the actual hardware.

In this particular platform bus implementation runtime
resume is not allowed from interrupt context. Runtime
suspend is however allowed from interrupt context as
long as the synchronous functions are avoided.

[ updated for v17 -- PFM. ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:17 +09:00
Paul Mundt 4f896ffca2 sh: unwinder: cacheline align slab cache objects.
The CIE and FDE structs are big enough and accessed regularly enough in
certain configurations to make cacheline alignment useful.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 19:03:25 +09:00
Paul Mundt fa9d3b4da5 Merge branch 'sh/dwarf-unwinder'
Conflicts:
	arch/sh/kernel/cpu/sh3/entry.S
2009-08-22 05:37:14 +09:00
Paul Mundt 74db2479c1 sh64: dummy unwinder BUG wrappers.
sh64 does not yet support GENERIC_BUG, but still wants unwinder support.
Alias UNWINDER_BUG and UNWINDER_BUG_ON to their BUG counterparts until
the conversion to GENERIC_BUG is completed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 05:31:45 +09:00
Paul Mundt e115f2c17c sh: unwinder: Use a special bug flag for unwinder traps.
This simplifies the unwinder trap handling, dropping the use of the
special trapa vector and simply piggybacking on top of the BUG support. A
new BUGFLAG_UNWINDER is added for flagging the unwinder fault, before
continuing on with regular BUG dispatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 05:28:25 +09:00
Paul Mundt c153a58e71 Merge branch 'sh/dwarf-unwinder' of git://github.com/mfleming/linux-2.6 into sh/dwarf-unwinder 2009-08-22 03:49:58 +09:00
Paul Mundt 4ab8f241f6 sh: Export unwind_stack() to satisfy modular oprofile.
If the oprofile code is built as a module, unwind_stack() as used by the
oprofile backtrace code is not available, causing build breakage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 03:43:15 +09:00
Matt Fleming 5580e9044d sh: Handle the DWARF op, DW_CFA_undefined
Allow a DWARF register to have an undefined value. When applied to the
DWARF return address register this lets lets us label a function as
having no direct caller, e.g. kernel_thread_helper().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:04:11 +01:00
Matt Fleming 5480675dc6 sh: Fix bug calculating the end of the FDE instructions
The 'end' member of struct dwarf_fde denotes one byte past the end of
the CFA instruction stream for an FDE. The value of 'end' was being
calcualted incorrectly, it was being set too high. This resulted in
dwarf_cfa_execute_insns() interpreting data past the end of valid
instructions, thus causing all sorts of weird crashes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:04:10 +01:00
Matt Fleming fe98dd31eb sh: Setup the frame pointer in handle_interrupt
When CONFIG_DWARF_UNWINDER is enabled setup r14 in handle_interrupt, so
that we can figure out what function was running when we were
interrupted.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:04:10 +01:00
Matt Fleming b344e24a8e sh: unwinder: Introduce UNWINDER_BUG() and UNWINDER_BUG_ON()
We can't assume that if we execute the unwinder code and the unwinder
was already running that it has faulted. Clearly two kernel threads can
invoke the unwinder at the same time and may be running simultaneously.

The previous approach used BUG() and BUG_ON() in the unwinder code to
detect whether the unwinder was incapable of unwinding the stack, and
that the next available unwinder should be used instead. A better
approach is to explicitly invoke a trap handler to switch unwinders when
the current unwinder cannot continue.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:02:44 +01:00
Matt Fleming 97efbbd588 sh: unwinder: Set the flags for DW_CFA_val_offset ops as DWARF_VAL_OFFSET
The handling of DW_CFA_val_offset ops was incorrectly using the
DWARF_REG_OFFSET flag but the register's value cannot be calculated
using the DWARF_REG_OFFSET method. Create a new flag to indicate that a
different method must be used to calculate the register's value even
though there is no implementation for DWARF_VAL_OFFSET yet; it's mainly
just a place holder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:02:44 +01:00
Matt Fleming fb3f3e7fc6 sh: unwinder: Fix memory leak and create our own kmem cache
Plug a memory leak in dwarf_unwinder_dump() where we didn't free the
memory that we had previously allocated for the DWARF frames and DWARF
registers.

Now is also a opportune time to implement our own mempool and kmem
cache. It's a good idea to have a certain number of frame and register
objects in reserve at all times, so that we are guaranteed to have our
allocation satisfied even when memory is scarce. Since we have pools to
allocate from we can implement the registers for each frame as a linked
list as opposed to a sparsely populated array. Whilst it's true that the
lookup time for a linked list is larger than for arrays, there's only
usually a maximum of 8 registers per frame. So the overhead isn't that
much of a concern.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-08-21 13:02:43 +01:00
Paul Mundt 64a6d72213 sh: Kill off now redundant local irq disabling.
on_each_cpu() takes care of IRQ and preempt handling, the localized
handling in each of the called functions can be killed off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 18:21:07 +09:00
Yoshihiro Shimoda c01f0f1a4a sh: Add initial support for SH7757 CPU subtype
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 17:25:47 +09:00
Paul Mundt f26b2a562b sh: Make cache flushers SMP-aware.
This does a bit of rework for making the cache flushers SMP-aware. The
function pointer-based flushers are renamed to local variants with the
exported interface being commonly implemented and wrapping as necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 17:23:14 +09:00