The nwbutton driver uses interruptible_sleep_on to wait for buttons
getting pressed after we enter the read() function, which is inherently
racy and cannot be fixed by using wait_event without changing the
driver's user space interface.
Instead, this patch just uses an open-coded variant of the same
interruptible_sleep_on() call, so the driver behavior doesn't change
but we remove the sleep_on family from the kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix syntax errors in comments and debug strings
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfc_nfc_free unlink clients from the device list
and has to be called under mei mutex
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When reset is caused by hbm protocol mismatch or timeout
we might end up in an endless reset loop and hbm protocol
will never sync
Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a potential deadlock in case of a firmware
initiated reset
mei_reset has a dialog with the interrupt thread hence
it has to be run from an another work item
Most of the mei_resets were called from mei_hbm_dispatch
which is called in interrupt thread context so this
function underwent major revamp. The error code is
propagated to the interrupt thread and if needed
the reset is scheduled from there.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function device_create_with_groups()
returns ERR_PTR() and never returns NULL. The NULL test in
the return value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dma_addr_t was not used, where it should have been used.
Some format strings were not optimal.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header which contained the declaration for kcalloc() was not
inlcuded.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Building mei-amt-version.o triggers a GCC warning:
Documentation/misc-devices/mei/mei-amt-version.c: In function 'main':
Documentation/misc-devices/mei/mei-amt-version.c:103:5: warning: 'acmd.fd' is used uninitialized in this function [-Wuninitialized]
if (cl->fd != -1)
^
Documentation/misc-devices/mei/mei-amt-version.c:443:21: note: 'acmd.fd' was declared here
struct amt_host_if acmd;
^
GCC is correct. See, the call chain that GCC detects must be
main()
amt_host_if_init()
mei_init()
mei_deinit()
But when we enter mei_deinit() struct amt_host_if acmd is still
unitialized. That makes the test for (effectively) amt_host_if->mei_cl->fd
bogus.
But it turns out that call of mei_deinit() isn't needed at all. All of
the members of mei_cl will be set later in mei_init() and none will be
used before they are set. So we can simply drop this call of
mei_deinit().
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of remaining bytes of a failing copy_to_user, the flash-update
ioctl is returning now -EFAULT. In addtion Dan discovered user triggerable
dev_errs(). Those I removed now from card_dev.c too. Some dev_infos()
were deleted and some others turned into dev_dbgs().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
interruptible_sleep_on_timeout is deprecated and going away soon.
The use in the sgi-xp driver leaves me puzzled, so I'd prefer not
to touch it. This patch replaces it with an open-coded prepare_to_wait
and finish_wait pair, which should be completely equivalent, so it
doesn't fix an existing race, but lets us get away with removing
the function so we can not get any new users.
In order to remove the typical sleep_on race, one would have to
replace the call with wait_event_interruptible_timeout and add
a condition to wait for. The fact that there is a one-jiffy timeout
suggests that we don't actually expect to get woken up properly
and the caller just uses this as a short sleeping function
if it doesn't wake up properly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Cliff Whickman <cpw@sgi.com>
Acked-by: Robin Holt <robinmholt@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a casting to u32 where u64 would be appropriate.
The bad casting made the driver unusable.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e6789cd3df (uio: Simplify uio error
path by using devres functions) converted uio to use devm_request_irq().
This introduced a change in behaviour since the IRQ is associated with
the parent device instead of the created UIO device. The IRQ will remain
active after uio_unregister_device() is called, and some drivers will
crash because of this. The patch fixes this.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: stable <stable@vger.kernel.org> # 3.13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As requested by Greg, replacing the hexdump function from dynamic_debug.h
with one defined in printk.h. I hope I picked the right one.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fengguang Wu used CF=-D__CHECK_ENDIAN__ to check the GenWQE driver for
endian issues. Sparse found a couple of those. Most of them were caused
by not correctly handling __be64/32 and __u64/32. Those I was able to
fix with appropriate castings.
One more serious issue was the ATS entry in struct genwqe_ddcb_cmd.
The kernel expected it in big-endian, but the type was defined __u64.
I decided that it is better to keep the interface consistent using
host endian byte-odering instead of having a mixture. With this change
the kernel likes to see host endian byte order for the ATS entry. That
would have been an interface change, if someone would have used the
driver already. Since this is not the case, I hope it is ok to fix it
now.
For the genqwe_readq/writeq/readl/writel functions I enforced the casts.
It still complains, as far as I can see, about some copy_to/from_user()
usages:
CHECK char-misc/drivers/misc/genwqe/card_dev.c
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
CC [M] drivers/misc/genwqe/card_dev.o
CHECK char-misc/drivers/misc/genwqe/card_ddcb.c
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
char-misc/arch/x86/include/asm/uaccess.h:625:18: warning: incorrect type in argument 1 (different modifiers)
char-misc/arch/x86/include/asm/uaccess.h:625:18: expected void *<noident>
char-misc/arch/x86/include/asm/uaccess.h:625:18: got void const *from
CC [M] drivers/misc/genwqe/card_ddcb.o
LD [M] drivers/misc/genwqe/genwqe_card.o
I appreciate some help from you to figure out what is causig those, and
making a proposal how to fix them.
I included the missing header file to fix the
implicit-function-declaration warning when using dynamic_hex_dump.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable possiblity to configure and build this driver.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sysfs interfaces for the GenWQE card. There are attributes to query
the version of the bitstream as well as some for the driver. For
debugging, please also see the debugfs interfaces of this driver.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debugfs interfaces for the GenWQE card. Help to debug potential
problems. Dump internal chip state for debugging and failure
determination.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miscelanous functionality used in the other GenWQE driver parts.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GenWQE card itself provides access to a generic work queue into
which the work can be put, which should be executed, e.g. compression
or decompression request, or whatever the card was configured to do.
Each request comes with a set of input data (ASV) and will produce some
output data (ASIV). The request will also contain a sequence number,
some timestamps and a command code/subcode plus some fields for hardware-/
software-interaction.
A request can contain references to blocks of memory. Since the card
requires DMA-addresses of that memory, the driver provides two ways to
solve that task:
1) The drivers mmap() will allocate some DMAable memory for the user.
The driver has a lookup table such that the virtual userspace
address can properly be replaced and checked.
2) The user allocates memory and the driver will pin/unpin that
memory and setup a scatter gatherlist with matching DMA addresses.
Currently work requests are synchronous.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Module initialization and PCIe setup. Card health monitoring and
recovery functionality. Character device creation and deletion are
controlled from here.
Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
Michael Jung <MIJUNG@de.ibm.com>,
Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan speed can be set to off, slow, and fast, which can be exported
to userspace through the hwmon ABI as pwm1 / pwm2.
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This doesn't work on Studio, XPS, Vostro, and Precision laptops,
and it doesn't provide any value except to cause confusion when
it does not work. Drop it and always use DMI BIOS version instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At least on Studio 1555 and XPS M140, the fan speed is reported directly,
not with the default speed multiplier of 30. Information on the web
suggests that this may be true for other models as well, though it is
unknown at this time which systems may be affected.
Use the driver_data field of dmi_system_id to override the default fan
multiplier value for the two systems known to use a multiplier of 1.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I made enough changes to the driver to warrant adding a copyright notice.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On Studio 1555 with dual-core CPU, reading sensor attributes
exported by this driver resulted in random failures combined
with system hangups and forced logouts. Information in
drivers/firmware/dcdbas.c suggests that SMM accesses must
run on CPU 0. With this patch, the problems are gone,
suggesting that this is in fact the case.
Code derived from drivers/firmware/dcdbas.c.
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver version number is long since obsolete, so drop it.
Also, drop the info message at driver startup to reduce boot noise.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accessing the link returns a page not found error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I have a couple of Dell laptops running Linux, so I have a vested
interest to keep this driver supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SMM API suggests that more than one temperature sensor is supported,
so add support for them. Currently only supported for hwmon interface.
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: __packed is preferred over __attribute__((packed))
WARNING: externs should be avoided in .c files
ERROR: spaces required around that ':' (ctx:ExV)
ERROR: do not use assignment in if condition
WARNING: line over 80 characters
WARNING: __initdata should be placed after i8k_dmi_table[]
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch marks the function hv_synic_free_cpu() as static in hv.c
because it is not used outside this file.
Thus, it also eliminates the following warning in hv.c:
drivers/hv/hv.c:304:6: warning: no previous prototype for ‘hv_synic_free_cpu’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch marks the function ad_dpot_add_files() and
ad_dpot_remove_files() as static in ad525x_dpot.c because they are not
used outside this file.
Thus, it also eliminates the following warnings in ad525x_dpot.c:
drivers/misc/ad525x_dpot.c:644:5: warning: no previous prototype for ‘ad_dpot_add_files’ [-Wmissing-prototypes]
drivers/misc/ad525x_dpot.c:669:13: warning: no previous prototype for ‘ad_dpot_remove_files’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch marks the function jp_generic_ide_ioctl() as static in
lkdtm.c because it is not used outside this file.
Thus, it also eliminates the following warnings in lkdtm.c:
drivers/misc/lkdtm.c:227:5: warning: no previous prototype for ‘jp_generic_ide_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ME device is 64bit DMA capable
We assume both coherent and consistent memory to match
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set hbm header bit 30 for internal commands
This mark commands that are generated by
the device driver
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the clock properties required by the atmel-ssc driver.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the clock properties required by the atmel_tclib driver.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For NUMA systems, initializing the blk-mq layer and using per node hctx.
We initialize submit queues to 1, while blk-mq nr_hw_queues is
initialized to the number of NUMA nodes.
This makes the null_init_hctx function overwrite memory outside of what
it allocated. In my case it lead to writing garbage into struct
request_queue's mq_map.
Signed-off-by: Matias Bjorling <m@bjorling.me>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
figure out why it breaks things.
2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
was basically doing "x == x", from Dave Jones.
3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
Sebastian Siewior.
4) Blackhole and prohibit routes in ipv6 were not doing the right thing
because their ->input and ->output methods were not being assigned
correctly. Now they behave properly like their ipv4 counterparts.
From Kamala R.
5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
really do not support this feature and will send garbage packets if
fed fraglist SKBs. From Eric Dumazet.
6) Fix long standing user triggerable BUG_ON over loopback in RDS
protocol stack, from Venkat Venkatsubra.
7) Several not so common code paths can potentially try to invoke
packet scheduler actions that might be NULL without checking. Shore
things up by either 1) defining a method as mandatory and erroring
on registration if that method is NULL 2) defininig a method as
optional and the registration function hooks up a default
implementation when NULL is seen. From Jamal Hadi Salim.
8) Fix fragment detection in xen-natback driver, from Paul Durrant.
9) Kill dangling enter_memory_pressure method in cg_proto ops, from
Eric W Biederman.
10) SKBs that traverse namespaces should have their local_df cleared,
from Hannes Frederic Sowa.
11) IOCB file position is not being updated by macvtap_aio_read() and
tun_chr_aio_read(). From Zhi Yong Wu.
12) Don't free virtio_net netdev before releasing all of the NAPI
instances. From Andrey Vagin.
13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.
14) IPv6 routes that are no cached routes should not count against the
garbage collection limits. We had this almost right, but were
missing handling addrconf generated routes properly. From Hannes
Frederic Sowa.
15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
route info when they are called, from Stefan Tomanek.
16) TUN and MACVTAP have had truncated packet signalling for some time,
fix from Jason Wang.
17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.
18) xen-netback does not interpret the NAPI budget properly for TX work,
fix from Paul Durrant.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
igb: Fix for issue where values could be too high for udelay function.
i40e: fix null dereference
xen-netback: fix gso_prefix check
net: make neigh_priv_len in struct net_device 16bit instead of 8bit
drivers: net: cpsw: fix for cpsw crash when build as modules
xen-netback: napi: don't prematurely request a tx event
xen-netback: napi: fix abuse of budget
sch_tbf: use do_div() for 64-bit divide
udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
net:fec: remove duplicate lines in comment about errata ERR006358
Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
xen-netback: make sure skb linear area covers checksum field
net: smc91x: Fix device tree based configuration so it's usable
udp: ipv4: fix potential use after free in udp_v4_early_demux()
macvtap: signal truncated packets
tun: unbreak truncated packet signalling
net: sched: htb: fix the calculation of quantum
net: sched: tbf: fix the calculation of max_size
micrel: add support for KSZ8041RNLI
...
Pull x86 fixes from Peter Anvin:
"This is a pretty small batch:
The biggest single change is to stop using EFI time services on 32-bit
platforms. This matches our current behavior on 64-bit platforms as
we already had ruled them out there as being too unreliable. Turns
out that affects 32-bit platforms, too.
One NULL pointer fix for SGI UV.
Two minor build fixes, one of which only affects icc and the other
which affects icc and future versions or nonstandard default settings
of gcc"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Don't use (U)EFI time services on 32 bit
x86, build, icc: Remove uninitialized_var() from compiler-intel.h
x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
x86, build: Pass in additional -mno-mmx, -mno-sse options
Arnd Bergmann