Signed-off-by: popcornmix <popcornmix@gmail.com>
vchiq: create_pagelist copes with vmalloc memory
Signed-off-by: Daniel Stone <daniels@collabora.com>
vchiq: fix the shim message release
Signed-off-by: Daniel Stone <daniels@collabora.com>
vchiq: export additional symbols
Signed-off-by: Daniel Stone <daniels@collabora.com>
VCHIQ: Make service closure fully synchronous (drv)
This is one half of a two-part patch, the other half of which is to
the vchiq_lib user library. With these patches, calls to
vchiq_close_service and vchiq_remove_service won't return until any
associated callbacks have been delivered to the callback thread.
VCHIQ: Add per-service tracing
The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that
toggles tracing for the specified service.
This commit also introduces vchi_service_set_option and the associated
option VCHI_SERVICE_OPTION_TRACE.
vchiq: Make the synchronous-CLOSE logic more tolerant
vchiq: Move logging control into debugfs
vchiq: Take care of a corner case tickled by VCSM
Closing a connection that isn't fully open requires care, since one
side does not know the other side's port number. Code was present to
handle the case where a CLOSE is sent immediately after an OPEN, i.e.
before the OPENACK has been received, but this was incorrectly being
used when an OPEN from a client using port 0 was rejected.
(In the observed failure, the host was attempting to use the VCSM
service, which isn't present in the 'cutdown' firmware. The failure
was intermittent because sometimes the keepalive service would
grab port 0.)
This case can be distinguished because the client's remoteport will
still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either
condition is sufficient to differentiate it from the special case
described above.
vchiq: Avoid high load when blocked and unkillable
vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work
vchiq_arm: Complete support for SYNCHRONOUS mode
vchiq: Remove inline from suspend/resume
vchiq: Allocation does not need to be atomic
vchiq: Fix wrong condition check
The log level is checked from within the log call. Remove the check in the call.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
BCM270x: Add vchiq device to platform file and Device Tree
Prepare to turn the vchiq module into a driver.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
bcm2708: vchiq: Add Device Tree support
Turn vchiq into a driver and stop hardcoding resources.
Use devm_* functions in probe path to simplify cleanup.
A global variable is used to hold the register address. This is done
to keep this patch as small as possible.
Also make available on ARCH_BCM2835.
Based on work by Lubomir Rintel.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
vchiq: Change logging level for inbound data
vchiq_arm: Two cacheing fixes
1) Make fragment size vary with cache line size
Without this patch, non-cache-line-aligned transfers may corrupt
(or be corrupted by) adjacent data structures.
Both ARM and VC need to be updated to enable this feature. This is
ensured by having the loader apply a new DT parameter -
cache-line-size. The existence of this parameter guarantees that the
kernel is capable, and the parameter will only be modified from the
safe default if the loader is capable.
2) Flush/invalidate vmalloc'd memory, and invalidate after reads
vchiq: fix NULL pointer dereference when closing driver
The following code run as root will cause a null pointer dereference oops:
int fd = open("/dev/vc-cma", O_RDONLY);
if (fd < 0)
err(1, "open failed");
(void)close(fd);
[ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 1704.877725] pgd = b899c000
[ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000
[ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio
[ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu
[ 1704.877777] Hardware name: BCM2709
[ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000
[ 1704.877798] PC is at __down_interruptible+0x50/0xec
[ 1704.877806] LR is at down_interruptible+0x5c/0x68
[ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093
sp : b7e69e50 ip : b7e69e88 fp : b7e69e84
[ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001
[ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34
[ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34
[ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015
[ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238)
[ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000)
[ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8
[ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88
[ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8
[ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c
[ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514
[ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18
[ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28
[ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794
[ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28
[ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0
[ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006
[ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000
[ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003
[ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000
[ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68)
[ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8)
[ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54)
[ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4)
[ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38)
[ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0)
[ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c)
[ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8)
[ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4)
[ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20)
[ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000)
..the fix is to ensure that we have actually initialized the queue before we attempt
to push any items onto it. This occurs if we do an open() followed by a close() without
any activity in between.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
vchiq_arm: Sort out the vmalloc case
See: https://github.com/raspberrypi/linux/issues/1055
vchiq: hack: Add include depecated dma include file
[gregkh] added dependancy on CONFIG_BROKEN to make things sane for now.
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This merges the greybus branch into staging-testing. It contains the
drivers/staging/greybus/ subsystem and related drivers and has passed
the 0-day bot tests so no builds should break.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a proper Kconfig file for drivers/staging/greybus and fixes up
the Makefile to work correctly within the kernel build system (modules
depend on the .config options, etc.)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This driver is superseded by rtl8xxxu and has been marked as scheduled
for deletion since 4.6
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
See the TODO for details where this driver came from. Only a few minor
changes were made to make the driver suitable for staging:
* updated Kconfig help text and dependencies
* added TODO
* removed two __DATE__ and __TIME__ printouts to allow reproducible builds
* added to staging main Kconfig + Makefile
Tested on a Renesas Salvator-X board with a Spectec SDW-823 card. I
could connect to a WPA-protected network.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 82ef33af9d. It turns
out these machines are still out there, and the original patch broke
them. So revert it, adding back the driver, so people's machines still
work properly.
Reported-by: James Cameron <quozl@laptop.org>
Cc: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As of commit 62d5bdf972
"Merge branch 'synaptics-rmi4' into next" the input subsystem
has a proper RMI4 infrastructure and touchscreen driver.
The ST Ux500 platform has been converted to use the new driver
and its devicetree bindings. Delete this ancient hack.
Cc: Andrew Duggan <aduggan@synaptics.com>
Cc: Christopher Heiny <cheiny@synaptics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case of lustre routers you only need a functioning
LNet stack. Especially since often the routers are very
light weight and want to avoid any addition software that
would create additional pressures on the system.
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The icn, act2000 and pcbit drivers are all for very old hardware,
and it is highly unlikely that anyone is actually still using them
on modern kernels, if at all.
All three drivers apparently are for hardware that predates PCI
being the common connector, as they are ISA-only and active
PCI ISDN cards were widely available in the 1990s.
Looking through the git logs, it I cannot find any indication of a
patch to any of these drivers that has been tested on real hardware,
only cleanups or global API changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is essentially a revert of 86f69fe9c0
("Staging: workaround build system bug"), but to call it a revert would
imply it was wrong -- rather it seems more like it is just no longer
required anymore.
It doesn't list the full details of the failing use case, but the most
obvious would appear to be a "make allnoconfig" that subsequently had set
just CONFIG_STAGING=y in the .config file, to give:
paul@builder:~/git/linux-head$ grep STAGING ../staging-allno/.config
CONFIG_STAGING=y
# CONFIG_STAGING_MEDIA is not set
# CONFIG_STAGING_BOARD is not set
paul@builder:~/git/linux-head$
After building this .config (on ARM, just to be different), we see that
built-in.o is created, and the final vmlinux links OK:
paul@builder:~/git/linux-head$ ls -l ../staging-allno/drivers/staging/built-in.o
-rw-rw-r-- 1 paul paul 257 Nov 16 18:06 ../staging-allno/drivers/staging/built-in.o
paul@builder:~/git/linux-head$ file ../staging-allno/drivers/staging/built-in.o
../staging-allno/drivers/staging/built-in.o: ELF 32-bit LSB relocatable, ARM, version 1, not stripped
paul@builder:~/git/linux-head$ nm ../staging-allno/drivers/staging/built-in.o
nm: ../staging-allno/drivers/staging/built-in.o: no symbols
paul@builder:~/git/linux-head$ ls -l ../staging-allno/vmlinux
-rwxrwxr-x 1 paul paul 1236326 Nov 16 18:07 ../staging-allno/vmlinux
paul@builder:~/git/linux-head$
I also tested an "allmodconfig" and did not see any problems there
either. Switching back to x86-64 and testing several things there didn't
show any issues either. So it appears we do not need to carry the
workaround in tree any longer.
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove support for dgap driver since there is no way to get
the firmware files required by the dgap driver into the linux-
firmware tree. The dgap driver is rendered useless without this
firmware and hence this product is considered obsolete by DIGI.
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove support for Qleadtek Flash-OFDM modems. Telecom carrier is
discontinuing service for the radio technology.
See http://www.gtigroup.org/news/ind/2015-08-18/6996.html.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing
read and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc. mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EHLg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull inifiniband/rdma updates from Doug Ledford:
"This is a fairly sizeable set of changes. I've put them through a
decent amount of testing prior to sending the pull request due to
that.
There are still a few fixups that I know are coming, but I wanted to
go ahead and get the big, sizable chunk into your hands sooner rather
than waiting for those last few fixups.
Of note is the fact that this creates what is intended to be a
temporary area in the drivers/staging tree specifically for some
cleanups and additions that are coming for the RDMA stack. We
deprecated two drivers (ipath and amso1100) and are waiting to hear
back if we can deprecate another one (ehca). We also put Intel's new
hfi1 driver into this area because it needs to be refactored and a
transfer library created out of the factored out code, and then it and
the qib driver and the soft-roce driver should all be modified to use
that library.
I expect drivers/staging/rdma to be around for three or four kernel
releases and then to go away as all of the work is completed and final
deletions of deprecated drivers are done.
Summary of changes for 4.3:
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular
tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing read
and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
IB/ipoib: Suppress warning for send only join failures
IB/ipoib: Clean up send-only multicast joins
IB/srp: Fix possible protection fault
IB/core: Move SM class defines from ib_mad.h to ib_smi.h
IB/core: Remove unnecessary defines from ib_mad.h
IB/hfi1: Add PSM2 user space header to header_install
IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
mlx5: Fix incorrect wc pkey_index assignment for GSI messages
IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
IB/uverbs: reject invalid or unknown opcodes
IB/cxgb4: Fix if statement in pick_local_ip6adddrs
IB/sa: Fix rdma netlink message flags
IB/ucma: HW Device hot-removal support
IB/mlx4_ib: Disassociate support
IB/uverbs: Enable device removal when there are active user space applications
IB/uverbs: Explicitly pass ib_dev to uverbs commands
IB/uverbs: Fix race between ib_uverbs_open and remove_one
IB/uverbs: Fix reference counting usage of event files
IB/core: Make ib_dealloc_pd return void
IB/srp: Create an insecure all physical rkey only if needed
...
Create the rdma directory in the staging area for use as we deprecate
some older drivers and as we bring in some new drivers that are in
need of work. Update the MAINTAINERS file so that updates to these
files go to linux-rdma@vger.kernel.org. Expected lifespan of this
directory is three releases for any deprecated drivers moved here
and an unknown, but theoretically bounded amount of time for the new
drivers as a new core RDMA transfer library needs to be written and
the drivers modified to use it in order for them to move out of this
directory.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ozwpan is completely unmaintained and potentially a security problem. As
this is a staging driver, it should be removed, since it has been
abandoned.
Cc: Shigekatsu Tateno <shigekatsu.tateno@atmel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now since all cleanups are done and the code is ready to be merged lets
move it out of staging into fbdev location.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the core module of the MOST driver to the kernel's driver
staging area. This module is part of the MOST driver and handles the
configuration interface in sysfs, the buffer management and the data
routing.
MOST defines the protocol, hardware and software layers necessary to allow
for the efficient and low-cost transport of control, real-time and packet
data using a single medium (physical layer). Media currently in use are
fiber optics, unshielded twisted pair cables (UTP) and coax cables. MOST
also supports various speed grades up to 150 Mbps.
For more information on MOST, visit the MOST Cooperation website:
www.mostcooperation.com.
Cars continue to evolve into sophisticated consumer electronics platforms,
increasing the demand for reliable and simple solutions to support audio,
video and data communications. MOST can be used to connect multiple
consumer devices via optical or electrical physical layers directly to one
another or in a network configuration. As a synchronous network, MOST
provides excellent Quality of Service and seamless connectivity for
audio/video streaming. Therefore, the driver perfectly fits to the mission
of Automotive Grade Linux to create open source software solutions for
automotive applications.
The driver consists basically of three layers. The hardware layer, the
core layer and the application layer. The core layer consists of the core
module only. This module handles the communication flow through all three
layers, the configuration of the driver, the configuration interface
representation in sysfs, and the buffer management.
For each of the other two layers a selection of modules is provided. These
modules can arbitrarily be combined to meet the needs of the desired
system architecture. A module of the hardware layer is referred to as an
HDM (hardware dependent module). Each module of this layer handles exactly
one of the peripheral interfaces of a network interface controller (e.g.
USB, MediaLB, I2C). A module of the application layer is referred to as an
AIM (application interfacing module). The modules of this layer give access
to MOST via one the following ways: character devices, ALSA, Networking or
V4L2.
To physically access MOST, an Intelligent Network Interface Controller
(INIC) is needed. For more information on available controllers visit:
www.microchip.com
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver is for the wilc1000 which is a single chip IEEE 802.11
b/g/n device.
The driver works together with cfg80211, which is the kernel side of
configuration management for wireless devices because the wilc1000
chipset is fullmac where the MLME is managed in hardware.
The driver worked from kernel version 2.6.38 and being now ported
to several others since then.
A TODO file is included as well in this commit.
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This subsystem isn't used anymore, and the hardware isn't around. It's
been in staging for a while, and it's time for it to now be removed.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sm750fb's Kconfig option is CONFIG_FB_SM750, not CONFIG_FB_SM7XX.
Thus fix it to make the sm750fb can be built successfully.
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Reviewed-by: Huacai Chen <chenhc@@lemote.com>
Acked-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Platform device driver that sets up the basic bus infrastructure
for the fsl-mc bus type, including support for adding/removing
fsl-mc devices, register/unregister of fsl-mc drivers, and bus
match support to bind devices to drivers.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sm750 of Silicon Motion is pci-e display controller device and has
features like dual display and 2D acceleration. This patch adds the
driver to staging.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big staging driver tree update for 3.20-rc1. Lots of little
things in here, adding up to lots of overall cleanups. The IIO driver
updates are also in here as they cross the staging tree boundry a lot.
I2O has moved into staging as well, as a plan to drop it from the tree
eventually as that's a dead subsystem.
All of this has been in linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlTgtVQACgkQMUfUDdst+yk4mACgshYZ1fOQDoPR+BXd+QD1HXfh
GosAoICXkSjDQjwVo13W6QHIVMsUezY+
=4jHr
-----END PGP SIGNATURE-----
Merge tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging drivers patches from Greg KH:
"Here's the big staging driver tree update for 3.20-rc1.
Lots of little things in here, adding up to lots of overall cleanups.
The IIO driver updates are also in here as they cross the staging tree
boundry a lot. I2O has moved into staging as well, as a plan to drop
it from the tree eventually as that's a dead subsystem.
All of this has been in linux-next with no reported issues for a
while"
* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
staging: lustre: lustre: libcfs: define symbols as static
staging: rtl8712: Do coding style cleanup
staging: lustre: make obd_updatemax_lock static
staging: rtl8188eu: core: switch with redundant cases
staging: rtl8188eu: odm: conditional setting with no effect
staging: rtl8188eu: odm: condition with no effect
staging: ft1000: fix braces warning
staging: sm7xxfb: fix remaining CamelCase
staging: sm7xxfb: fix CamelCase
staging: rtl8723au: multiple condition with no effect - if identical to else
staging: sm7xxfb: make smtc_scr_info static
staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
staging/lustre/clio: Do not allow group locks with gid 0
staging/lustre/llite: don't add to page cache upon failure
staging/lustre/llite: Add exception entry check after radix_tree
staging/lustre/libcfs: protect kkuc_groups from write access
staging/lustre/fld: refer to MDT0 for fld lookup in some cases
staging/lustre/llite: Solve a race to access lli_has_smd in read case
staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
staging/lustre/lnet: portal spreading rotor should be unsigned
...
We have a drivers/input layer for Synaptics products and nothing should now
be using the staging driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The I2O layer deals with a technology that to say the least didn't catch on
in the market.
The only relevant products are some of the AMI MegaRAID - which supported I2O
and its native mode (The native mode is faster and runs on Linux), an
obscure crypto ethernet card that's now so many years out of date nobody
would use it, the old DPT controllers, which speak their own dialect and
have their own driver - and ermm.. thats about it.
We also know the code isn't in good shape as recently a patch was proposed
and queried as buggy, which in turn showed the existing code was broken
already by prior "clean up" and nobody had noticed that either.
It's coding style robot code nothing more. Like some forgotten corridor
cleaned relentlessly by a lost Roomba but where no user has trodden in years.
Move it to staging and then to /dev/null.
The headers remain as they are shared with dpt_i2o.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.
This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here's the big staging tree pull request for 3.19-rc1.
We continued to delete more lines than were added, always a good thing,
but not at a huge rate this release, only about 70k lines removed
overall mostly from removing the horrid bcm driver.
Lots of normal staging driver cleanups and fixes all over the place,
well over a thousand of them, the shortlog shows all the horrid details.
The "contentious" thing here is the movement of the Android binder code
out of staging into the "real" part of the kernel. This is code that
has been stable for a few years now and is working as-is in the tens of
millions of devices with no issues. Yes, the code is horrid, and the
userspace api leaves a lot to be desired, but it's not going to change
due to legacy issues that we have no control over. Because so many
devices and companies rely on this, and the code is stable, might as
well promote it out of staging.
This was all discussed at the Linux Plumbers conference, and everyone
participating agreed that this was the best way forward.
There is work happening to replace the binder code with something new
that is happening right now, but I don't expect to see the results of
that work for another year at the earliest. If that ever happens, and
Android switches over to it, I'll gladly remove this version.
As for maintainers, I'll be glad to maintain this code, I've been doing
it for the past few years with no problems. I'll send a MAINTAINERS
entry for it before 3.19-final is out, still need to talk to the Google
developers about if they are willing to help with it or not, last I
checked they were, which was good.
All of these patches have been in linux-next for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSPICkACgkQMUfUDdst+yksdwCfSLE9VUy1o2sAPDRe+J3bQced
EWEAoL3RtnejKbo5tHS2IT69pLrwiIDS
=YXyM
-----END PGP SIGNATURE-----
Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here's the big staging tree pull request for 3.19-rc1.
We continued to delete more lines than were added, always a good
thing, but not at a huge rate this release, only about 70k lines
removed overall mostly from removing the horrid bcm driver.
Lots of normal staging driver cleanups and fixes all over the place,
well over a thousand of them, the shortlog shows all the horrid
details.
The "contentious" thing here is the movement of the Android binder
code out of staging into the "real" part of the kernel. This is code
that has been stable for a few years now and is working as-is in the
tens of millions of devices with no issues. Yes, the code is horrid,
and the userspace api leaves a lot to be desired, but it's not going
to change due to legacy issues that we have no control over. Because
so many devices and companies rely on this, and the code is stable,
might as well promote it out of staging.
This was all discussed at the Linux Plumbers conference, and everyone
participating agreed that this was the best way forward.
There is work happening to replace the binder code with something new
that is happening right now, but I don't expect to see the results of
that work for another year at the earliest. If that ever happens, and
Android switches over to it, I'll gladly remove this version.
As for maintainers, I'll be glad to maintain this code, I've been
doing it for the past few years with no problems. I'll send a
MAINTAINERS entry for it before 3.19-final is out, still need to talk
to the Google developers about if they are willing to help with it or
not, last I checked they were, which was good.
All of these patches have been in linux-next for a while with no
reported issues"
* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
Staging: slicoss: Fix long line issues in slicoss.c
staging: rtl8712: remove unnecessary else after return
staging: comedi: change some printk calls to pr_err
staging: rtl8723au: hal: Removed the extra semicolon
lustre: Deletion of unnecessary checks before three function calls
staging: lustre: fix sparse warnings: static function declaration
staging: lustre: fixed sparse warnings related to static declarations
staging: unisys: remove duplicate header
staging: unisys: remove unneeded structure
staging: ft1000 : replace __attribute ((__packed__) with __packed
drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
Drivers:staging:rtl8192e: Fixed checkpatch warning
Drivers:staging:clocking-wizard: Added a newline
staging: clocking-wizard: check for a valid clk_name pointer
staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
...
The imx-drm driver was put into staging mostly for the following reasons,
all of which have been addressed or superseded:
- convert the irq driver to use linear irq domains
- work out the device tree bindings, this lead to the common of_graph
bindings being used
- factor out common helper functions, this mostly resulted in the
component framework and drm of_graph helpers.
Before adding new fixes, and certainly before adding new features,
move it into its proper place below drivers/gpu/drm.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The Beceem WiMAX driver was barely function in its current state
and was non-functional on 64 bit systems. Based on repeated
statements from Greg KH that he wanted the driver removed, I am
removing the driver.
CC: Matthias Beyer <mail@beyermatthias.de>
CC: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a driver for the Xilinx Clocking Wizard soft IP. The clocking wizard
provides an AXI interface to dynamically reconfigure the clocking
resources of Xilinx FPGAs.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current version of the et131x driver has been accepted into the
main tree at /drivers/net/ethernet, so it can now be removed from
staging.
The MAINTAINERS entry has not been touched here, as the patch to
add the driver to drivers/net modifies it correctly.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new version of this driver has been merged into the regular wireless tree.
The staging version is hereby removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is now a "real" driver in the wireless tree for this hardware
device, so remove the staging driver as it is no longer needed.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver has been functional and stable throughout the year it has spent
in the staging area. It has been patched for minor bugs, coding style issues
and improvements during this period.
This is the second submission of this move-out, after making several style
improvements, as suggested by Dan Carpenter.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Bluetooth maintainer has been complaining about it for a while, and
I shouldn't have merged it over his objections. There also has been no
real work done on it at all to get it out of the staging tree, so just
delete the code for now.
If someone wants to get this fixed up properly, feel free to revert this
commit and send the revert, along with cleanups and we will be glad to
consider it.
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>,
Cc: Miguel Oliveira <cmroliv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At this point, USB/IP kernel code is fully functional
and can be moved out of staging.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like no one's working on the driver anymore, so remove it for now.
If someone wants to work on moving it out of staging, this commit can be
reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Mark A. Allyn <mark.a.allyn@intel.com>
Cc: Jayant Mangalampalli <jayant.mangalampalli@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove it.
If someone wants to work on cleaning the driver up and moving it out of
staging, this commit can be reverted.
In addition, since this removes the CONFIG_NET_VENDOR_SILICOM config
symbol, remove the symbol from all defconfig files that reference it.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove the
driver from the kernel. If someone wants to work on cleaning it up and
moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Angelo Arrifano <miknix@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove the
driver from the kernel. If someone wants to work on cleaning it up and
moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been fully cleaned up and it doesn't look like anyone
is working on it anymore (including the original author). So remove the
driver and all references to it. If someone wants to finish cleaning
the driver up and moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver hasn't been cleaned up and it doesn't look like anyone is
working on it anymore (including the original author). So remove the
driver from the kernel. If someone wants to work on cleaning it up and
moving it out of staging, this commit can be reverted.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: David Täht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The state of the driver hasn't improved much since it was added to
staging, and no one with the hardware is currently working on it, so
remove it. This commit can be reverted if someone wants to clean the
driver up and move it to its proper place in the kernel.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Greg Smith <greg@ced.co.uk>
Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
popcornmix