Commit Graph

8 Commits

Author SHA1 Message Date
Martyn Welch f5d570d32c powerpc/86xx: Add MSI section to GE SBC310 DTS
Add the MSI section to the DTS file for the GE SBC310.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-17 21:17:03 -06:00
Martyn Welch 9093067ad1 powerpc/86xx: Support for NVRAM on GE Fanuc's SBC310
Add support for NVRAM on GE Fanuc's SBC310.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:36 -06:00
Martyn Welch 433abcdf32 powerpc/86xx: Update GE Fanuc sbc310 DTS
Update GE Fanuc DTS to match the alterations suggested during the merge of
the ppc9a DTS in commit 740d36ae63

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:58 +10:00
Martyn Welch 8798b9df26 powerpc/86xx: Enable XMC site on GE Fanuc SBC310
This patch enables the XMC (PCIe daughter card) site on the SBC310.
STG enter the description for the patch above.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:58 +10:00
Kumar Gala b1b6802586 powerpc/fsl: Removed reg property from 85xx/86xx soc node
Between the addition of the ecm/mcm law nodes and the fact that the
get_immrbase() has been using the range property of the SoC to determine
the base address of CCSR space we no longer need the reg property at
the soc node level.  It has been ill specified and varied between device
trees to cover either the {e,m}cm-law node, some odd subset of CCSR
space or all of CCSR space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:29 -05:00
Kumar Gala da38578048 powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systems
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:21 -05:00
Anton Vorontsov d8bc55fb33 powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:18 -05:00
Martyn Welch bb2b66dca1 powerpc/86xx: Board support for GE Fanuc SBC310
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's SBC310, a 3U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28 23:03:20 -06:00