mirror of https://gitee.com/openkylin/linux.git
220 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Linus Torvalds
|
6f630784cc |
This time around we have 4 lines of diff in the core framework, removing a
function that isn't used anymore. Otherwise the main new thing for the common
clk framework is that it is selectable in the Kconfig language now. Hopefully
this will let clk drivers and clk consumers be testable on more than the
architectures that support the clk framework. The goal is to introduce some
Kunit tests for the framework.
Outside of the core framework we have the usual set of various driver updates
and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the
largest addition this time around in terms of lines of code. After that the x86
(Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or
upcoming SoCs. After that the dirstat shows the usual suspects working on their
SoC support by fixing minor bugs, correcting data and converting some of their
DT bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix clock support
on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3
drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on
aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using composite
clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined
bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+
-----BEGIN PGP SIGNATURE-----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=nuG5
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
|
|
Linus Torvalds
|
828f3e18e1 |
ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
|
|
|
Arnd Bergmann
|
b5f73d47f3 |
clk: sprd: fix compile-testing
I got a build failure with CONFIG_ARCH_SPRD=m when the main portion of the clock driver failed to get linked into the kernel: ERROR: modpost: "sprd_pll_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_comp_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_clk_probe" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_clk_regmap_init" [drivers/clk/sprd/sc9863a-clk.ko] undefined! ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined! ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined! ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined! This is a combination of two trivial bugs: - A platform should not be 'tristate', it should be a 'bool' symbol like the other platforms, if only for consistency, and to avoid surprises like this one. - The clk Makefile does not traverse into the sprd subdirectory if the platform is disabled but the drivers are enabled for compile-testing. Fixing either of the two would be sufficient to address the link failure, but for correctness, both need to be changed. Fixes: |
|
|
Stephen Boyd
|
166e4b4841 |
Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next
- Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - New clk driver for Baikal-T1 SoCs * clk-vc5: dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 * clk-hsdk: CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first * clk-mediatek: clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC * clk-baikal: clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding |
|
|
Serge Semin
|
b7d950b928 |
clk: Add Baikal-T1 CCU PLLs driver
Baikal-T1 is supposed to be supplied with a high-frequency external oscillator. But in order to create signals suitable for each IP-block embedded into the SoC the oscillator output is primarily connected to a set of CCU PLLs. There are five of them to create clocks for the MIPS P5600 cores, an embedded DDR controller, SATA, Ethernet and PCIe domains. The last three domains though named by the biggest system interfaces in fact include nearly all of the rest SoC peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM IP-core with an interface wrapper (so called safe PLL' clocks switcher) to simplify the PLL configuration procedure. This driver creates the of-based hardware clocks to use them then in the corresponding subsystems. In order to simplify the driver code we split the functionality up into the PLLs clocks operations and hardware clocks declaration/registration procedures. Even though the PLLs are based on the same IP-core, they may have some differences. In particular, some CCU PLLs support the output clock change without gating them (like CPU or PCIe PLLs), while the others don't, some CCU PLLs are critical and aren't supposed to be gated. In order to cover all of these cases the hardware clocks driver is designed with an info-descriptor pattern. So there are special static descriptors declared for each PLL, which is then used to create a hardware clock with proper operations. Additionally debugfs-files are provided for each PLL' field to make sure the implemented rate-PLLs-dividers calculation algorithm is correct. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200526222056.18072-4-Sergey.Semin@baikalelectronics.ru [sboyd@kernel.org: Silence sparse warning about initializing structs with NULL vs. integer] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Dinh Nguyen
|
80c6b7a089 |
clk: socfpga: agilex: add clock driver for the Agilex platform
For the most part the Agilex clock structure is very similar to Stratix10, so we re-use most of the Stratix10 clock driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lkml.kernel.org/r/20200512181647.5071-5-dinguyen@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Rob Herring
|
81134fb541 |
clk: versatile: Rework kconfig structure
CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding Arm Ltd reference platform clock drivers. It is both selected by the platforms that need it and has a 'depends on' for those platforms. Let's drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a menuconfig entry. With this make CONFIG_ICST visible. Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did not). This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST as it was not visible before. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> |
|
|
Stephen Boyd
|
db865ee447 |
Merge branches 'clk-imx', 'clk-ti', 'clk-xilinx', 'clk-nvidia', 'clk-qcom', 'clk-freescale' and 'clk-qoriq' into clk-next
- Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Fixes for clk controllers on qcom msm8998 SoCs - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Adjust composite clk to new way of describing clk parents - Add a driver for BCLK of Freescale SAI cores * clk-imx: (32 commits) clk: imx: Add support for i.MX8MP clock driver dt-bindings: imx: Add clock binding doc for i.MX8MP clk: imx: gate4: Switch imx_clk_gate4_flags() to clk_hw based API clk: imx: imx8mq: Switch to clk_hw based API clk: imx: imx8mm: Switch to clk_hw based API clk: imx: imx8mn: Switch to clk_hw based API clk: imx: Remove __init for imx_obtain_fixed_clk_hw() API clk: imx: gate3: Switch to clk_hw based API clk: imx: add hw API imx_clk_hw_mux2_flags clk: imx: add imx_unregister_hw_clocks clk: imx: clk-composite-8m: Switch to clk_hw based API clk: imx: clk-pll14xx: Switch to clk_hw based API clk: imx7up: Rename the clks to hws clk: imx: Rename the imx_clk_divider_gate to imply it's clk_hw based clk: imx: Rename the imx_clk_pfdv2 to imply it's clk_hw based clk: imx: Rename the imx_clk_pllv4 to imply it's clk_hw based clk: imx: Rename sccg and frac pll register to suggest clk_hw clk: imx: imx7ulp composite: Rename to show is clk_hw based clk: imx: pllv2: Switch to clk_hw based API clk: imx: pllv1: Switch to clk_hw based API ... * clk-ti: clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock clk: ti: dra7: fix parent for gmac_clkctrl clk: ti: dra7: add vpe clkctrl data clk: ti: dra7: add cam clkctrl data dt-bindings: clock: Move ti-dra7-atl.h to dt-bindings/clock * clk-xilinx: clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver * clk-nvidia: clk: tegra20/30: Explicitly set parent clock for Video Decoder clk: tegra20/30: Don't pre-initialize displays parent clock clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe() clk: tegra: Mark fuse clock as critical * clk-qcom: (35 commits) clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: qcom: Add ipq6018 Global Clock Controller support clk: qcom: Add DT bindings for ipq6018 gcc clock controller clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks clk: qcom: rpmh: Add IPA clock for SC7180 clk: qcom: rpmh: skip undefined clocks when registering clk: qcom: Add video clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Video clock bindings dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings clk: qcom: Add graphics clock controller driver for SC7180 dt-bindings: clock: Introduce SC7180 QCOM Graphics clock bindings dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent clk: qcom: Add display clock controller driver for SC7180 dt-bindings: clock: Introduce QCOM sc7180 display clock bindings dt-bindings: clock: Add YAML schemas for the QCOM DISPCC clock bindings clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration clk: qcom: alpha-pll: Remove useless read from set rate ... * clk-freescale: clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants * clk-qoriq: clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings |
|
|
Wen He
|
d37010a3c1 |
clk: ls1028a: Add clock driver for Display output interface
Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY), as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable integer division and range of the display output pixel clock's 27-594MHz. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20191213083402.35678-2-wen.he_1@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Michael Walle
|
9cd1020522 |
clk: fsl-sai: new driver
With this driver it is possible to use the BCLK pin of the SAI module as a generic clock output. This is esp. useful if you want to drive a clock to an audio codec. Because the output only allows integer divider values the audio codec needs an integrated PLL. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lkml.kernel.org/r/20200102231101.11834-3-michael@walle.cc Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Manivannan Sadhasivam
|
1ab4601da5 |
clk: Add common clock driver for BM1880 SoC
Add common clock driver for Bitmain BM1880 SoC. The clock controller on BM1880 has supplies clocks to all peripherals in the form of gate clocks and composite clocks (fixed factor + gate). Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lkml.kernel.org/r/20191115162901.17456-7-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Joel Stanley
|
d3d04f6c33 |
clk: Add support for AST2600 SoC
The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks than the previous iterations, so support is broken out into it's own driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au [sboyd@kernel.org: Mark arrays const] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Mike Looijmans
|
3044a860fd |
clk: Add Si5341/Si5340 driver
Adds a driver for the Si5341 and Si5340 chips. The driver does not fully support all features of these chips, but allows the chip to be used without any support from the "clockbuilder pro" software. If the chip is preprogrammed, that is, you bought one with some defaults burned in, or you programmed the NVM in some way, the driver will just take over the current settings and only change them on demand. Otherwise the input must be a fixed XTAL in its most basic configuration (no predividers, no feedback, etc.). The driver supports dynamic changes of multisynth, output dividers and enabling or powering down outputs and multisynths. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd@kernel.org: Mark some things static, use BIT_ULL for big bits and ULL for big constants] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Stephen Boyd
|
ff060019f4 |
Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier |
|
|
Stephen Boyd
|
5816b74581 |
Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-next
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support |
|
|
Paul Walmsley
|
30b8e27e3b |
clk: sifive: add a driver for the SiFive FU540 PRCI IP block
Add driver code for the SiFive FU540 PRCI IP block. This IP block
handles reset and clock control for the SiFive FU540 device and
implements SoC-level clock tree controls and dividers.
Based on code written by Wesley Terpstra <wesley@sifive.com>:
|
|
|
Paul Walmsley
|
7b9487a9a5 |
clk: analogbits: add Wide-Range PLL library
Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP
block, as implemented in TSMC CLN28HPC.
There is no bus interface or register target associated with this PLL.
This library is intended to be used by drivers for IP blocks that
expose registers connected to the PLL configuration and status
signals.
Based on code originally written by Wesley Terpstra
<wesley@sifive.com>:
|
|
|
Sugaya Taichi
|
6a6ba5b55a |
clock: milbeaut: Add Milbeaut M10V clock controller
The M10V of the Milbeaut SoCs has an on-chip controller that derive mostly clocks from a single external clock, using PLLs, dividers, multiplexers and gates. Since the PLLs have already been started and will not stop / restart, they are fixed factor. The gates will be added in later patch (all of the gates are off state now). Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Charles Keepax
|
76c547830b |
clk: lochnagar: Add support for the Cirrus Logic Lochnagar
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. The Lochnagar can take several input clocks from the host system, provides several of its own clock sources, and provides extensive routing options for those clocks to be supplied to the attached CODEC/Amp device. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Stephen Boyd
|
3f8e7e7247 |
Merge branches 'clk-optional', 'clk-devm-clkdev-register', 'clk-allwinner', 'clk-meson' and 'clk-renesas' into clk-next
- Add a {devm_}clk_get_optional() API
- Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
* clk-optional:
clk: Add (devm_)clk_get_optional() functions
clk: Add comment about __of_clk_get_by_name() error values
* clk-devm-clkdev-register:
clk: clk-st: avoid clkdev lookup leak at remove
clk: clk-max77686: Clean clkdev lookup leak and use devm
clkdev: add managed clkdev lookup registration
* clk-allwinner:
clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it
* clk-meson: (22 commits)
clk: meson: meson8b: fix the naming of the APB clocks
dt-bindings: clock: meson8b: add APB clock definition
clk: meson: Add G12A AO Clock + Reset Controller
dt-bindings: clk: add G12A AO Clock and Reset Bindings
clk: meson: factorise meson64 peripheral clock controller drivers
clk: meson: g12a: add peripheral clock controller
dt-bindings: clk: meson: add g12a periph clock controller bindings
clk: meson: pll: update driver for the g12a
clk: meson: rework and clean drivers dependencies
clk: meson: axg-audio does not require syscon
clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
clk: export some clk_hw function symbols for module drivers
clk: meson: ao-clkc: claim clock controller input clocks from DT
clk: meson: axg: claim clock controller input clock from DT
clk: meson: gxbb: claim clock controller input clock from DT
clk: meson: meson8b: add the GPU clock tree
clk: meson: meson8b: use a separate clock table for Meson8
clk: meson: axg-ao: add 32k generation subtree
clk: meson: gxbb-ao: replace cec-32k with the dual divider
clk: meson: add dual divider clock driver
...
* clk-renesas:
clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK
clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK
clk: renesas: r8a774c0: Add TMU clock
clk: renesas: r8a77980: Add RPC clocks
clk: renesas: rcar-gen3: Add RPC clocks
clk: renesas: rcar-gen3: Add spinlock
clk: renesas: rcar-gen3: Factor out cpg_reg_modify()
clk: renesas: r8a774c0: Correct parent clock of DU
clk: renesas: r8a774a1: Add missing CANFD clock
clk: renesas: r8a774c0: Add missing CANFD clock
|
|
|
Jerome Brunet
|
6e47b53073 |
clk: meson: use CONFIG_ARCH_MESON to enter meson clk directory
Use CONFIG_ARCH_MESON to let make enter the meson clock directory. As part of a rework, CONFIG_COMMON_CLK_AMLOGIC is about to be removed. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-3-jbrunet@baylibre.com |
|
|
Jan Kotas
|
50cc4caf53 |
clk: Add Fixed MMIO clock driver
This patch adds a driver for Fixed MMIO clock. The driver reads a clock frequency value from a single 32-bit memory mapped register and registers it as a fixed rate clock. It can be enabled with COMMON_CLK_FIXED_MMIO Kconfig option. Signed-off-by: Jan Kotas <jank@cadence.com> [sboyd@kernel.org: Make of_fixed_mmio_clk_setup() static, use clk_hw based APIs] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Stephen Boyd
|
58c05c823b |
Merge branches 'clk-imx7ulp', 'clk-imx6-fixes', 'clk-imx-fixes', 'clk-imx8qxp' and 'clk-imx8mq' into clk-next
- NXP i.MX7ULP SoC clock support - Support for i.MX8QXP SoC clocks - Support for NXP i.MX8MQ clock controllers * clk-imx7ulp: clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support * clk-imx6-fixes: clk: imx6q: handle ENET PLL bypass clk: imx6q: optionally get CCM inputs via standard clock handles clk: imx6q: reset exclusive gates on init * clk-imx-fixes: clk: imx6q: add DCICx clocks gate clk: imx6sl: ensure MMDC CH0 handshake is bypassed clk: imx7d: remove UART1 clock setting * clk-imx8qxp: clk: imx: add imx8qxp lpcg driver clk: imx: add lpcg clock support clk: imx: add imx8qxp clk driver clk: imx: add scu clock common part clk: imx: add configuration option for mmio clks dt-bindings: clock: add imx8qxp lpcg clock binding dt-bindings: clock: imx8qxp: add SCU clock IDs firmware: imx: add pm svc headfile dt-bindings: fsl: scu: update power domain binding firmware: imx: remove resource id enums dt-bindings: imx: add scu resource id headfile * clk-imx8mq: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant clk: imx: remove redundant initialization of ret to zero clk: imx: Add SCCG PLL type clk: imx: Add fractional PLL output clock clk: imx: Add clock driver for i.MX8MQ CCM clk: imx: Add imx composite clock dt-bindings: Add binding for i.MX8MQ CCM |
|
|
Aisheng Dong
|
3a48d918a4 |
clk: imx: add configuration option for mmio clks
The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks, this is required to compile legacy MMIO clock conditionally when adding SCU based clocks for MX8 platforms later. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Matti Vaittinen
|
2e62246b08 |
clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock
ROHM bd71837 and |
|
|
Linus Torvalds
|
519f64bf15 |
This time it looks like a quieter release cycle in the clk tree. I guess that's
because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvY4ysRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVaDBAA3Wv/rsCn4FJ2ZgIWYWQqr69lAWDcBVVe 4nNbFqzEmRoml8e+XOfVFwnbsai4B5ALVxyMnRlkDyxQ5TFQtF957U12Pf8upPa5 R447YBt4tw40NCj8u5KNAaBmYYHdmXXDvsBPXyQn+1iy/9R8Is8AcDmv+D2ucuJF PPBXOwb+2CstUQhuwlXyvsAw/tqq/rJDVyAZVJUoqXJwlNMjr76V0m0ZXHN6NcyC F2SfnzIO4srRteTeKXVFcMU/3uHC3zofEfammSJjGZkk4WHULuPpkD17RMEyBul1 Ju1S1nzGiKvYME/mmbIcRPNcpry65EVo/wn6IjAcG2m4GaWSq3F6qIttnoc6dnra R2VylIEy7HnNcAf8fkQdkd/l+h/TDp3iVrXg0p/rRxRk4Jlc86n2PWO6jtsZv4S+ NySeRhTb51KrTl72J76LP+dfDWdbeZfkAqr0Qx6QM04OznVYSTHlnQaeM1Nx2SZR 5+k126NdxDp7xgoJNfq18wzufrlefjuRTg2Kck1YuFuhV4Fjmq7ZC81bSSaakYPh /t073TcSZ+VfEYP5hVsl/pjMdFzHcj8pbavhs0UNIYLQNXe494Bm9PyYJOzQKnwz Zpbf7V6eplh8J1I03VI8RHviNp340iv2hhz9vp4mNP1vIhgdNiz7R2gn5sLSoFt+ vei0J0vEzCA= =V5aK -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time it looks like a quieter release cycle in the clk tree. I guess that's because of summer time holidays/vacations. The biggest change in the diffstat is in the Qualcomm clk driver, where they got support for CPUs and handful of SoCs. After that, the at91 driver got a major rewrite for newer DT bindings that should make things easier going forward and the TI code moved to a clockdomain based design. The long tail is mostly small driver updates for newer clks and some simpler SoC clock drivers such as the Hisilicon and imx support. In the core framework, we only have two small changes this time. One is a new clk API to get all clks for a device with the bulk clk APIs. This allows drivers that don't care about doing anything besides turning on all the clks to just clk_get() them all and turn them on. The other change is the beginning of a way to support save and restore of clk settings in the clk framework. TI is the only user right now, but we will want to expand upon this design in the future to support more save and restore of clk registers. At least this gets us started and works well enough for one SoC, but there's more work in the future. Core: - clk_bulk_get_all() API and friends to get all the clks for a device - Basic clk state save/restore hooks New Drivers: - Renesas RZ/A2 (R7S9210) SoC, including early clocks - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs - Rensas RZ/G2M (r8a774a1) SoC - Qualcomm Krait CPU clk support - Qualcomm QCS404 GCC support - Qualcomm SDM660 GCC support - Qualcomm SDM845 camera clock controller - Ingenic jz4725b CGU - Hisilicon 3670 SoC support - TI SCI clks on K3 SoCs - iMX6 MMDC clks - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs Updates: - Rework at91 PMC clock driver for new DT bindings - Nvidia Tegra clk driver MBIST workaround fix - S2RAM support for Marvell mvebu periph clks - Use updated printk format for OF node names - Fix TI code to only search DT subnodes - Various static analysis finds - Tag various drivers with SPDX license tags - Support dynamic frequency switching (DFS) on qcom SDM845 GCC - Only use s2mps11 dt-binding defines instead of redefining them in the driver - Add some more missing clks to qcom MSM8996 GCC - Quad SPI clks on qcom SDM845 - Add support for CMT timer clocks on R-Car V3H - Add support for SHDI and various timer clocks on R-Car V3M - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs - Amlogic clk-pll driver improvements and updates - Amlogic axg audio controller system clocks - Register Amlogic meson8b clock controller early - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC - Remove obsoleted Exynos4212 ISP clock definitions - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design - TI RTC+DDR sleep mode support for clock save/restore - Allwinner A64 display engine support and fixes - Allwinner A83t display engine support and fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits) clk: qcom: Remove unused arrays in SDM845 GCC clk: fixed-rate: fix of_node_get-put imbalance clk: s2mps11: Add used attribute to s2mps11_dt_match clk: qcom: gcc-sdm660: Add MODULE_LICENSE clk: qcom: Add safe switch hook for krait mux clocks dt-bindings: clock: Document qcom,krait-cc clk: qcom: Add Krait clock controller driver dt-bindings: arm: Document qcom,kpss-gcc clk: qcom: Add KPSS ACC/GCC driver clk: qcom: Add support for Krait clocks clk: qcom: Add IPQ806X's HFPLLs clk: qcom: Add MSM8960/APQ8064's HFPLLs dt-bindings: clock: Document qcom,hfpll clk: qcom: Add HFPLL driver clk: qcom: Add support for High-Frequency PLLs (HFPLLs) ARM: Add Krait L2 register accessor functions clk: imx6q: add mmdc0 ipg clock clk: imx6sl: add mmdc ipg clocks clk: imx6sll: add mmdc1 ipg clock clk: imx6sx: add mmdc1 ipg clock ... |
|
|
Stephen Boyd
|
19ef24654f |
Merge branch 'clk-ingenic-jz4725b' into clk-next
- Ingenic jz4725b CGU * clk-ingenic-jz4725b: clk: Add Ingenic jz4725b CGU driver dt-bindings: clock: Add jz4725b-cgu.h header dt-bindings: clock: ingenic: Explicitly list compatible strings clk: ingenic: Add proper Kconfig entries |
|
|
Paul Cercueil
|
0880fb8660 |
clk: ingenic: Add proper Kconfig entries
Previously, the CGU code corresponding to the SoC for which we're compiling the kernel was the only one enabled, which made it impossible to build one kernel that supports them all. Now, it is possible to select more than one SoC to support. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Jolly Shah
|
3fde0e16d0 |
drivers: clk: Add ZynqMP clock driver
This patch adds CCF compliant clock driver for ZynqMP. Clock driver queries supported clock information from firmware and regiters pll and output clocks with CCF. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Tejas Patel <tejasp@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Jolly Shah <jolly.shah@xilinx.com> Acked-by: Olof Johansson <olof@lixom.net> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> |
|
|
Nishanth Menon
|
2f149e6e14 |
clk: keystone: Enable TISCI clocks if K3_ARCH
K3_ARCH uses TISCI for clocks as well. Enable the same for the driver support. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
db06f826ec |
The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal
duty cycle ratios can be adjusted while taking into account things
like clk dividers and clk tree hierarchy. So far only one SoC has
implemented support for this, but I expect there will be more to
come in the future.
Outside of the core, we have the usual pile of clk driver updates
and additions. The Amlogic meson driver got the most lines in the
diffstat this time around because it added support for a whole bunch
of hardware and duty cycle configuration. After that the Rockchip PX30,
Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff.
We're left with the collection of non-critical fixes after that. Overall
it looks pretty quiet this time.
Core:
- Clk duty cycle support
- Proper CLK_SET_RATE_GATE support throughout the tree
New Drivers:
- Actions Semi Owl series S700 SoC clk driver
- Qualcomm SDM845 display clock controller
- i.MX6SX ocram_s clk support
- Uniphier NAND, USB3 PHY, and SPI clk support
- Qualcomm RPMh clk driver
- i.MX7D mailbox clk support
- Maxim 9485 Programmable Clock Generator
- Expose 32 kHz PLL on PXA SoCs
- imx6sll GPIO clk gate support
- Atmel at91 I2S audio clk support
- SI544/SI514 clk on/off support
- i.MX6UL GPIO clock gates in CCM CCGR
- Renesas Crypto Engine clocks on R-Car H3
- Renesas clk support for the new RZ/N1D SoC
- Allwinner A64 display engine clock support
- Support for Rockchip's PX30 SoC
- Amlogic Meson axg PCIe and audio clocks
- Amlogic Meson GEN CLK on gxbb, gxl and axg
Updates:
- Remove an unused variable from Exynos4412 ISP driver
- Fix a thinko bug in SCMI clk division logic
- Add missing of_node_put()s in some i.MX clk drivers
- Tegra SDMMC clk jitter improvements with high speed signaling modes
- SPDX tagging for qcom and cs2000-cp drivers
- Stop leaking con ids in __clk_put()
- Fix a corner case in fixed factor clk probing where node is in DT but
parent clk is registered much later
- Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value
- i.MX clk init arrays removed in place of CLK_IS_CRITICAL
- Convert to CLK_IS_CRITICAL for i.MX51/53 driver
- Fix Tegra BPMP driver oops when xlating a NULL clk
- Proper default configuration for vic03 and vde clks on Tegra124
- Mark Tegra memory controller clks as critical
- Fix array bounds clamp in Tegra's emc determine_rate() op
- Ingenic i2s bit update and allow UDC clk to gate
- Fix name of aspeed SDC clk define to have only one 'CLK'
- Fix i.MX6QDL video clk parent
- Critical clk markings for qcom SDM845
- Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
- Mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying
the pwm used to drive the logic supply of the rk3399 core.
-----BEGIN PGP SIGNATURE-----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=Mcn+
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal duty
cycle ratios can be adjusted while taking into account things like clk
dividers and clk tree hierarchy. So far only one SoC has implemented
support for this, but I expect there will be more to come in the
future.
Outside of the core, we have the usual pile of clk driver updates and
additions. The Amlogic meson driver got the most lines in the diffstat
this time around because it added support for a whole bunch of
hardware and duty cycle configuration. After that the Rockchip PX30,
Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
diff. We're left with the collection of non-critical fixes after that.
Overall it looks pretty quiet this time.
Core:
- Clk duty cycle support
- Proper CLK_SET_RATE_GATE support throughout the tree
New Drivers:
- Actions Semi Owl series S700 SoC clk driver
- Qualcomm SDM845 display clock controller
- i.MX6SX ocram_s clk support
- Uniphier NAND, USB3 PHY, and SPI clk support
- Qualcomm RPMh clk driver
- i.MX7D mailbox clk support
- Maxim 9485 Programmable Clock Generator
- expose 32 kHz PLL on PXA SoCs
- imx6sll GPIO clk gate support
- Atmel at91 I2S audio clk support
- SI544/SI514 clk on/off support
- i.MX6UL GPIO clock gates in CCM CCGR
- Renesas Crypto Engine clocks on R-Car H3
- Renesas clk support for the new RZ/N1D SoC
- Allwinner A64 display engine clock support
- support for Rockchip's PX30 SoC
- Amlogic Meson axg PCIe and audio clocks
- Amlogic Meson GEN CLK on gxbb, gxl and axg
Updates:
- remove an unused variable from Exynos4412 ISP driver
- fix a thinko bug in SCMI clk division logic
- add missing of_node_put()s in some i.MX clk drivers
- Tegra SDMMC clk jitter improvements with high speed signaling modes
- SPDX tagging for qcom and cs2000-cp drivers
- stop leaking con ids in __clk_put()
- fix a corner case in fixed factor clk probing where node is in DT
but parent clk is registered much later
- Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
value
- i.MX clk init arrays removed in place of CLK_IS_CRITICAL
- convert to CLK_IS_CRITICAL for i.MX51/53 driver
- fix Tegra BPMP driver oops when xlating a NULL clk
- proper default configuration for vic03 and vde clks on Tegra124
- mark Tegra memory controller clks as critical
- fix array bounds clamp in Tegra's emc determine_rate() op
- Ingenic i2s bit update and allow UDC clk to gate
- fix name of aspeed SDC clk define to have only one 'CLK'
- fix i.MX6QDL video clk parent
- critical clk markings for qcom SDM845
- fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
- mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
supplying the pwm used to drive the logic supply of the rk3399
core"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
clk: cs2000-cp: convert to SPDX identifiers
clk: scmi: Fix the rounding of clock rate
clk: qcom: Add display clock controller driver for SDM845
clk: mvebu: armada-37xx-periph: Remove unused var num_parents
clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
clk: actions: Add S700 SoC clock support
dt-bindings: clock: Add S700 support for Actions Semi Soc's
clk: actions: Add missing REGMAP_MMIO dependency
clk: uniphier: add clock frequency support for SPI
clk: uniphier: add more USB3 PHY clocks
clk: uniphier: add NAND 200MHz clock
clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
clk: tegra: Add sdmmc mux divider clock
clk: tegra: Refactor fractional divider calculation
clk: tegra: Fix includes required by fence_udelay()
clk: imx6sll: fix missing of_node_put()
clk: imx6ul: fix missing of_node_put()
clk: imx: add ocram_s clock for i.mx6sx
clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
...
|
|
|
Daniel Mack
|
33f5104624 |
clk: Add driver for MAX9485
This patch adds a driver for MAX9485, a programmable audio clock generator. The device requires a 27.000 MHz clock input. It can provide a gated buffered output of its input clock and two gated outputs of a PLL that can generate one out of 16 discrete frequencies. There is only one PLL however, so the two gated outputs will always have the same frequency but they can be switched individually. The driver for this device exposes 4 clocks in total: - MAX9485_MCLKOUT: A gated, buffered output of the input clock - MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete frequencies - MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT Some PLL output frequencies can be achieved with different register settings. The driver will select the one with lowest jitter in such cases. Signed-off-by: Daniel Mack <daniel@zonque.org> [sboyd@kernel.org: Use local variable for val in max9485_clkout_recalc_rate() and shorten line of max9485_of_clk_get()] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Masahiro Yamada
|
12f8c553a5 |
clk: sunxi-ng: replace lib-y with obj-y
We had commit |
|
|
Stephen Boyd
|
872e47f75f |
Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and 'clk-qcom-rcg-fix' into clk-next
* clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency |
|
|
Stephen Boyd
|
43705f5294 |
Merge branch 'clk-actions' into clk-next
* clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings |
|
|
Tali Perry
|
fcfd143698 |
clk: npcm7xx: add clock controller
Nuvoton Poleg BMC NPCM7XX contains an integrated clock controller, which generates and supplies clocks to all modules within the BMC. Signed-off-by: Tali Perry <tali.perry1@gmail.com> [sboyd@kernel.org: Drop clk_get()s, cleanup whitespace, drop unused includes, fix static checker warnings] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Linus Torvalds
|
ca4e7c5120 |
The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+ /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf X6P2pfkBqkg= =ys4O -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The large diff this time around is from the addition of a new clk driver for the TI Davinci family of SoCs. So far those clks have been supported with a custom implementation of the clk API in the arch port instead of in the CCF. With this driver merged we're one step closer to having a single clk API implementation. The other large diff is from the Amlogic clk driver that underwent some major surgery to use regmap. Beyond that, the biggest hitter is Samsung which needed some reworks to properly handle clk provider power domains and a bunch of PLL rate updates. The core framework was fairly quiet this round, just getting some cleanups and small fixes for some of the more esoteric features. And the usual set of driver non-critical fixes, cleanups, and minor additions are here as well. Core: - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops - debugfs ops macroized to shave some lines of boilerplate code - Always calculate the phase instead of caching it in clk_get_phase() - More __must_check on bulk clk APIs New Drivers: - TI's Davinci family of SoCs - Intel's Stratix10 SoC - stm32mp157 SoC - Allwinner H6 CCU - Silicon Labs SI544 clock generator chip - Renesas R-Car M3-N and V3H SoCs - i.MX6SLL SoCs Removed Drivers: - ST-Ericsson AB8540/9540 Updates: - Mediatek MT2701 and MT7622 audsys support and MT2712 updates - STM32F469 DSI and STM32F769 sdmmc2 support - GPIO clks can sleep now - Spreadtrum SC9860 RTC clks - Nvidia Tegra MBIST workarounds and various minor fixes - Rockchip phase handling fixes and a memory leak plugged - Renesas drivers switch to readl/writel from clk_readl/clk_writel - Renesas gained CPU (Z/Z2) and watchdog support - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support - Qualcomm PM8921 PMIC XO buffers - Amlogic migrates to regmap APIs - TI Keystone clk latching support - Allwinner H3 and H5 video clk fixes - Broadcom BCM2835 PLLs needed another bit to enable - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix - i.MX6UL/ULL epdc_podf support - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits) clk: davinci: add a reset lookup table for psc0 clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux clk: cs2000: set pm_ops in hibernate-compatible way clk: bcm2835: De-assert/assert PLL reset signal when appropriate clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 clk: ti: fix flag space conflict with clkctrl clocks clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: Add driver for the si544 clock generator chip clk: davinci: Remove redundant dev_err calls clk: uniphier: add ethernet clock control support for PXs3 ... |
|
|
Manivannan Sadhasivam
|
3495e29565 |
clk: actions: Add common clock driver support
Add support for Actions Semi common clock driver with generic structures and interface functions. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Stephen Boyd
|
a339bdf64a |
Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and 'clk-imx6sll' into clk-next
* clk-stratix10: clk: socfpga: stratix10: add clock driver for Stratix10 platform dt-bindings: documentation: add clock bindings information for Stratix10 * clk-imx: clk: imx7d: Move clks_init_on before any clock operations clk: imx7d: Correct ahb clk parent select clk: imx7d: Correct dram pll type clk: imx7d: Add USB clock information clk: imx: pllv2: avoid using uninitialized values clk: imx6ull: Add epdc_podf instead of sim_podf clk: imx: imx7d: correct video pll clock tree clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock clk: imx: imx6sx: update cko mux options * clk-bcm: clk: bcm2835: De-assert/assert PLL reset signal when appropriate * clk-cs2000: clk: cs2000: set pm_ops in hibernate-compatible way * clk-imx6sll: clk: imx: add clock driver for imx6sll dt-bindings: imx: update clock doc for imx6sll clk: imx: add new gate/gate2 wrapper funtion clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux |
|
|
Stephen Boyd
|
a83fdfae5a |
Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' and 'clk-ti-flag-fix' into clk-next
* clk-davinci: clk: davinci: Remove redundant dev_err calls clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks clk: davinci: New driver for TI DA8XX CFGCHIP clocks dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks clk: davinci: Add platform information for TI DM646x PSC clk: davinci: Add platform information for TI DM644x PSC clk: davinci: Add platform information for TI DM365 PSC clk: davinci: Add platform information for TI DM355 PSC clk: davinci: Add platform information for TI DA850 PSC clk: davinci: Add platform information for TI DA830 PSC clk: davinci: New driver for davinci PSC clocks dt-bindings: clock: New bindings for TI Davinci PSC clk: davinci: Add platform information for TI DM646x PLL clk: davinci: Add platform information for TI DM644x PLL clk: davinci: Add platform information for TI DM365 PLL clk: davinci: Add platform information for TI DM355 PLL clk: davinci: Add platform information for TI DA850 PLL clk: davinci: Add platform information for TI DA830 PLL clk: davinci: New driver for davinci PLL clocks dt-bindings: clock: Add new bindings for TI Davinci PLL clocks * clk-si544: clk: Add driver for the si544 clock generator chip * clk-rockchip: clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399 clk: rockchip: Fix error return in phase clock registration clk: rockchip: Correct the behaviour of restoring cached phase clk: rockchip: Fix wrong parents for MMC phase clock for rk3328 clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 clk: rockchip: Add 1.6GHz PLL rate for rk3399 clk: rockchip: Restore the clock phase after the rate was changed clk: rockchip: Prevent calculating mmc phase if clock rate is zero clk: rockchip: Free the memory on the error path clk: rockchip: document hdmi_phy external input for rk3328 clk: rockchip: add flags for rk3328 dclk_lcdc clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks clk: rockchip: protect all remaining rk3328 interconnect clocks clk: rockchip: export sclk_hdmi_sfc on rk3328 clk: rockchip: remove HCLK_VIO from rk3328 dt header clk: rockchip: fix hclk_vio_niu on rk3328 * clk-uniphier: clk: uniphier: add additional ethernet clock lines for Pro4 clk: uniphier: add SATA clock control support clk: uniphier: add PCIe clock control support clk: uniphier: add ethernet clock control support for PXs3 clk: uniphier: add Pro4/Pro5/PXs2 audio system clock * clk-ti-flag-fix: clk: ti: fix flag space conflict with clkctrl clocks clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag |
|
|
Dinh Nguyen
|
07afb8db73 |
clk: socfpga: stratix10: add clock driver for Stratix10 platform
Add a clock driver for the Stratix10 SoC. The driver is similar to the Cyclone5/Arria10 platforms, with the exception that this driver only uses one single clock binding. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Mike Looijmans
|
953cc3e811 |
clk: Add driver for the si544 clock generator chip
This patch adds the driver and devicetree documentation for the Silicon Labs SI544 clock generator chip. This is an I2C controlled oscillator capable of generating clock signals ranging from 200kHz to 1500MHz. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> [sboyd: assign max_freq to 0 in is_valid_frequency() to squelch warning] Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
David Lechner
|
2d17269151 |
clk: davinci: New driver for davinci PLL clocks
This adds a new driver for mach-davinci PLL clocks. This is porting the code from arch/arm/mach-davinci/clock.c to the common clock framework. Additionally, it adds device tree support for these clocks. The ifeq ($(CONFIG_COMMON_CLK), y) in the Makefile is needed to prevent compile errors until the clock code in arch/arm/mach-davinci is removed. Note: although there are similar clocks for TI Keystone we are not able to share the code for a few reasons. The keystone clocks are device tree only and use legacy one-node-per-clock bindings. Also the register layouts are a bit different, which would add even more if/else mess to the keystone clocks. And the keystone PLL driver doesn't support setting clock rates. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Benjamin Gaignard
|
da32d3539f |
clk: stm32: add configuration flags for each of the stm32 drivers
Add two configuration flags to be able to not compile all the time stm32f and stm32h7 drivers when ARCH_STM32 is set. That help to save some space on those small platforms. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
|
|
Gabriel Fernandez
|
9bee94e7b7 |
clk: stm32mp1: Introduce STM32MP1 clock driver
This patch introduces the mechanism to probe stm32mp1 driver. It also defines registers definition. This patch also introduces the generic mechanism to register a clock (a simple gate, divider and fixed factor). All clocks will be defined in one table. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> |
|
|
Sudeep Holla
|
6d6a1d82ea |
clk: add support for clocks provided by SCMI
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. This patch adds support for the clocks provided by SCP using SCMI protocol. Cc: linux-clk@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> |
|
|
Stephen Boyd
|
c43a52cfd2 |
Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next
* clk-aspeed: clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs dt-bindings: clock: Add ASPEED constants * clk-lock-UP: clk: fix reentrancy of clk_enable() on UP systems * clk-mediatek: clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: mediatek: Fix all warnings for missing struct clk_onecell_data clk: mediatek: fixup test-building of MediaTek clock drivers clk: mediatek: group drivers under indpendent menu * clk-allwinner: clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU clk: sunxi-ng: add support for Allwinner H3 DE2 CCU dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL clk: sunxi-ng: Support fixed post-dividers on NM style clocks clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks clk: sunxi-ng: Support fixed post-dividers on MP style clocks clk: sunxi: Use PTR_ERR_OR_ZERO() |
|
|
Joel Stanley
|
5eda5d79e4 |
clk: Add clock driver for ASPEED BMC SoCs
This adds the stub of a driver for the ASPEED SoCs. The clocks are defined and the static registration is set up. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> |
|
|
Sean Wang
|
74cb0d6dde |
clk: mediatek: fixup test-building of MediaTek clock drivers
Let the build system looking into the directiory where the clock drivers resides for the COMPILE_TEST alternative dependency allows test-building the drivers. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> |
|
|
Chunyan Zhang
|
d41f59fd92 |
clk: sprd: Add common infrastructure
Added Spreadtrum's clock driver framework together with common structures and interface functions. Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> |