linux/arch/arm
Paul Walmsley 71348bcaac OMAP2/3/4 PRCM: add module IDLEST wait code
After a hardware module's clocks are enabled, Linux must wait for it
to indicate readiness via its IDLEST bit before attempting to access
the device, otherwise register accesses to the device may trigger an
abort.  This has traditionally been implemented in the clock
framework, but this is the wrong place for it: the clock framework
doesn't know which module clocks must be enabled for a module to leave
idle; and if a module is not in smart-idle mode, it may never leave
idle at all.  This type of information is best stored in a
per-hardware module data structure (coming in a following patch),
rather than a per-clock data structure.  The new code will use these new
functions to handle waiting for modules to enable.

Once hardware module data is filled in for all of the on-chip devices,
the clock framework code to handle IDLEST waiting can be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-03 20:14:02 +03:00
..
boot ARM: includecheck fix: misc.c 2009-07-25 17:07:00 +01:00
common ARM: 5639/1: arm: clkdev.c should include <linux/clk.h> 2009-08-05 22:06:58 +01:00
configs OMAP3: update OMAP3 Beagle defconfig 2009-08-28 11:24:17 -07:00
include/asm ARM: Fix broken highmem support 2009-08-15 12:36:00 +01:00
kernel ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH 2009-08-05 22:06:58 +01:00
lib Merge branch 'copy_user' of git://git.marvell.com/orion into devel 2009-06-14 10:59:32 +01:00
mach-aaec2000 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-at91 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx 2009-07-30 16:46:31 -07:00
mach-clps711x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-davinci ARM: includecheck fix: board-sffsdr.c 2009-07-25 17:07:02 +01:00
mach-ebsa110 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ep93xx [ARM] 5611/1: ep93xx: update ts72xx nor flash support 2009-07-23 10:21:24 +01:00
mach-footbridge [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-gemini Gemini: Fix SRAM/ROM location after memory swap 2009-05-28 16:42:25 +03:00
mach-h720x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-integrator [ARM] 5517/1: integrator: don't put clock lookups in __initdata 2009-05-18 17:43:16 +01:00
mach-iop13xx dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) 2009-04-07 08:31:10 -07:00
mach-iop32x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-iop33x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ixp4xx IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes 2009-08-11 19:22:20 +02:00
mach-ixp23xx [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-ixp2000 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-kirkwood [ARM] Kirkwood: enable eSATA on QNAP TS-219P 2009-08-24 11:56:00 -04:00
mach-ks8695 ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers 2009-08-05 22:06:56 +01:00
mach-l7200 [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF 2009-05-18 11:25:08 +01:00
mach-lh7a40x [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-loki [ARM] add coherent DMA mask for mv643xx_eth 2009-05-22 17:05:53 -04:00
mach-mmp [ARM] pxa: add PWM devices support for pxa168/910 2009-06-05 10:32:06 +08:00
mach-msm clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-mv78xx0 [ARM] orion: convert gpio to use gpiolib 2009-06-08 13:04:57 -04:00
mach-mx1 mx1ads: rename mxc_map_io to mx1_map_io 2009-05-07 16:20:22 +02:00
mach-mx2 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2009-06-14 13:42:43 -07:00
mach-mx3 mx31moboard: invert sdhc ro signal sense 2009-08-14 12:33:23 +02:00
mach-netx [ARM] VIC: Add power management device 2009-05-07 11:04:57 +01:00
mach-ns9xxx clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
mach-omap1 OMAP1: AMS_DELTA: add modem support 2009-08-28 10:51:37 -07:00
mach-omap2 OMAP2/3/4 PRCM: add module IDLEST wait code 2009-09-03 20:14:02 +03:00
mach-orion5x [ARM] orion5x: register the crypto device on SOCs that support it 2009-06-15 00:37:08 -04:00
mach-pnx4008 [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-pxa Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-07-30 10:46:12 +01:00
mach-realview ARM: Realview & Versatile: Fix i2c_board_info definitions 2009-07-18 17:08:59 +01:00
mach-rpc [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-s3c24a0/include/mach [ARM] S3C: Make IRQ_EINT sleep control common 2009-03-08 12:35:36 +00:00
mach-s3c2400 [ARM] S3C24XX: GPIO: Fix error returns from gpio functions 2009-05-18 19:40:18 +01:00
mach-s3c2410 S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip 2009-07-29 23:47:14 +01:00
mach-s3c2412 Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-10 22:41:06 +01:00
mach-s3c2440 [ARM] MINI2440: Add missing flash_bbt flat to NAND 2009-06-23 18:23:27 +01:00
mach-s3c2442 [ARM] GTA02: build fixes (s3c2410_nand_set usage) 2009-06-24 00:10:46 +01:00
mach-s3c2443 [ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h> 2009-05-01 11:39:06 +01:00
mach-s3c6400 Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-10 22:41:06 +01:00
mach-s3c6410 [ARM] SMDK6410: Add USB high-speed/OtG gadget device 2009-05-16 22:14:09 +01:00
mach-sa1100 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2009-06-14 13:46:25 -07:00
mach-shark [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
mach-stmp37xx [ARM] 5539/1: Freescale STMP: onboard devices declaration 2009-06-04 14:16:45 +01:00
mach-stmp378x [ARM] 5539/1: Freescale STMP: onboard devices declaration 2009-06-04 14:16:45 +01:00
mach-u300 ARM: 5673/1: U300 fix initsection compile warning 2009-08-15 15:36:52 +01:00
mach-versatile ARM: Realview & Versatile: Fix i2c_board_info definitions 2009-07-18 17:08:59 +01:00
mach-w90x900 [ARM] 5549/1: Add clock api for w90p910 platform. 2009-06-11 14:45:18 +01:00
mm ARM: Fix broken highmem support 2009-08-15 12:36:00 +01:00
nwfpe [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning 2009-05-15 12:49:14 +01:00
oprofile RealView: Move the IRQ_* definitions out of the board-*.h files 2009-05-30 14:00:17 +01:00
plat-iop dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) 2009-04-07 08:31:11 -07:00
plat-mxc pcm037: add MT9T031 camera support 2009-06-23 14:25:26 +02:00
plat-omap OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer 2009-09-03 20:14:01 +03:00
plat-orion [ARM] Kirkwood: __init requires linux/init.h 2009-08-24 11:55:59 -04:00
plat-pxa [ARM] pxa: use kzalloc() in pxa_init_gpio_chip() 2009-07-03 14:17:51 +08:00
plat-s3c [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices 2009-06-23 16:34:35 +01:00
plat-s3c24xx ARM: S3C24XX: Fix clkout mpx error 2009-08-14 00:45:49 +01:00
plat-s3c64xx Merge branch 's3c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linux 2009-07-30 10:47:55 +01:00
plat-stmp3xxx ARM: includecheck fix: plat-stmp3xxx/pinmux.c 2009-07-25 17:08:24 +01:00
tools [ARM] Update mach-types 2009-06-20 22:28:41 +01:00
vfp Fix the VFP handling on the Feroceon CPU 2009-05-30 14:00:18 +01:00
Kconfig [ARM] S3C64XX: Initial support for DVFS 2009-06-16 23:36:24 +01:00
Kconfig-nommu
Kconfig.debug [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT 2009-06-23 12:24:07 +01:00
Makefile Merge branch 'u300' into devel 2009-06-14 11:01:44 +01:00