mirror of https://gitee.com/openkylin/linux.git
b8c0aa46b3
to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume. Other changes include clean ups of uprobe code. Clean up of the trace_seq() code. And other various small fixes and clean ups to ftrace and tracing. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5 FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47 rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q= =fwQY -----END PGP SIGNATURE----- Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ... |
||
|---|---|---|
| .. | ||
| aacraid | ||
| aic7xxx | ||
| aic94xx | ||
| arcmsr | ||
| arm | ||
| be2iscsi | ||
| bfa | ||
| bnx2fc | ||
| bnx2i | ||
| csiostor | ||
| cxgbi | ||
| device_handler | ||
| dpt | ||
| esas2r | ||
| fcoe | ||
| fnic | ||
| ibmvscsi | ||
| isci | ||
| libfc | ||
| libsas | ||
| lpfc | ||
| megaraid | ||
| mpt2sas | ||
| mpt3sas | ||
| mvsas | ||
| osd | ||
| pcmcia | ||
| pm8001 | ||
| qla2xxx | ||
| qla4xxx | ||
| sym53c8xx_2 | ||
| ufs | ||
| .gitignore | ||
| 3w-9xxx.c | ||
| 3w-9xxx.h | ||
| 3w-sas.c | ||
| 3w-sas.h | ||
| 3w-xxxx.c | ||
| 3w-xxxx.h | ||
| 53c700.c | ||
| 53c700.h | ||
| 53c700.scr | ||
| 53c700_d.h_shipped | ||
| BusLogic.c | ||
| BusLogic.h | ||
| FlashPoint.c | ||
| Kconfig | ||
| Makefile | ||
| NCR53c406a.c | ||
| NCR5380.c | ||
| NCR5380.h | ||
| NCR_D700.c | ||
| NCR_D700.h | ||
| NCR_Q720.c | ||
| NCR_Q720.h | ||
| a100u2w.c | ||
| a100u2w.h | ||
| a2091.c | ||
| a2091.h | ||
| a3000.c | ||
| a3000.h | ||
| a4000t.c | ||
| advansys.c | ||
| aha152x.c | ||
| aha152x.h | ||
| aha1542.c | ||
| aha1542.h | ||
| aha1740.c | ||
| aha1740.h | ||
| atari_NCR5380.c | ||
| atari_scsi.c | ||
| atari_scsi.h | ||
| atp870u.c | ||
| atp870u.h | ||
| bvme6000_scsi.c | ||
| ch.c | ||
| constants.c | ||
| dc395x.c | ||
| dc395x.h | ||
| dmx3191d.c | ||
| dpt_i2o.c | ||
| dpti.h | ||
| dtc.c | ||
| dtc.h | ||
| eata.c | ||
| eata_generic.h | ||
| eata_pio.c | ||
| eata_pio.h | ||
| esp_scsi.c | ||
| esp_scsi.h | ||
| fdomain.c | ||
| fdomain.h | ||
| g_NCR5380.c | ||
| g_NCR5380.h | ||
| g_NCR5380_mmio.c | ||
| gdth.c | ||
| gdth.h | ||
| gdth_ioctl.h | ||
| gdth_proc.c | ||
| gdth_proc.h | ||
| gvp11.c | ||
| gvp11.h | ||
| hosts.c | ||
| hpsa.c | ||
| hpsa.h | ||
| hpsa_cmd.h | ||
| hptiop.c | ||
| hptiop.h | ||
| imm.c | ||
| imm.h | ||
| in2000.c | ||
| in2000.h | ||
| initio.c | ||
| initio.h | ||
| ipr.c | ||
| ipr.h | ||
| ips.c | ||
| ips.h | ||
| iscsi_boot_sysfs.c | ||
| iscsi_tcp.c | ||
| iscsi_tcp.h | ||
| jazz_esp.c | ||
| lasi700.c | ||
| libiscsi.c | ||
| libiscsi_tcp.c | ||
| libsrp.c | ||
| mac53c94.c | ||
| mac53c94.h | ||
| mac_esp.c | ||
| mac_scsi.c | ||
| mac_scsi.h | ||
| megaraid.c | ||
| megaraid.h | ||
| mesh.c | ||
| mesh.h | ||
| mvme16x_scsi.c | ||
| mvme147.c | ||
| mvme147.h | ||
| mvumi.c | ||
| mvumi.h | ||
| ncr53c8xx.c | ||
| ncr53c8xx.h | ||
| nsp32.c | ||
| nsp32.h | ||
| nsp32_debug.c | ||
| nsp32_io.h | ||
| osst.c | ||
| osst.h | ||
| osst_detect.h | ||
| osst_options.h | ||
| pas16.c | ||
| pas16.h | ||
| pmcraid.c | ||
| pmcraid.h | ||
| ppa.c | ||
| ppa.h | ||
| ps3rom.c | ||
| qla1280.c | ||
| qla1280.h | ||
| qlogicfas.c | ||
| qlogicfas408.c | ||
| qlogicfas408.h | ||
| qlogicpti.c | ||
| qlogicpti.h | ||
| raid_class.c | ||
| script_asm.pl | ||
| scsi.c | ||
| scsi.h | ||
| scsi_debug.c | ||
| scsi_devinfo.c | ||
| scsi_error.c | ||
| scsi_ioctl.c | ||
| scsi_lib.c | ||
| scsi_lib_dma.c | ||
| scsi_logging.h | ||
| scsi_module.c | ||
| scsi_netlink.c | ||
| scsi_pm.c | ||
| scsi_priv.h | ||
| scsi_proc.c | ||
| scsi_sas_internal.h | ||
| scsi_scan.c | ||
| scsi_sysctl.c | ||
| scsi_sysfs.c | ||
| scsi_tgt_if.c | ||
| scsi_tgt_lib.c | ||
| scsi_tgt_priv.h | ||
| scsi_trace.c | ||
| scsi_transport_api.h | ||
| scsi_transport_fc.c | ||
| scsi_transport_fc_internal.h | ||
| scsi_transport_iscsi.c | ||
| scsi_transport_sas.c | ||
| scsi_transport_spi.c | ||
| scsi_transport_srp.c | ||
| scsi_transport_srp_internal.h | ||
| scsi_typedefs.h | ||
| scsicam.c | ||
| sd.c | ||
| sd.h | ||
| sd_dif.c | ||
| ses.c | ||
| sg.c | ||
| sgiwd93.c | ||
| sim710.c | ||
| sni_53c710.c | ||
| sr.c | ||
| sr.h | ||
| sr_ioctl.c | ||
| sr_vendor.c | ||
| st.c | ||
| st.h | ||
| st_options.h | ||
| stex.c | ||
| storvsc_drv.c | ||
| sun3_NCR5380.c | ||
| sun3_scsi.c | ||
| sun3_scsi.h | ||
| sun3_scsi_vme.c | ||
| sun3x_esp.c | ||
| sun_esp.c | ||
| sym53c416.c | ||
| sym53c416.h | ||
| t128.c | ||
| t128.h | ||
| tmscsim.c | ||
| tmscsim.h | ||
| u14-34f.c | ||
| ultrastor.c | ||
| ultrastor.h | ||
| virtio_scsi.c | ||
| vmw_pvscsi.c | ||
| vmw_pvscsi.h | ||
| wd33c93.c | ||
| wd33c93.h | ||
| wd7000.c | ||
| zalon.c | ||
| zorro7xx.c | ||