The cc library and cc binary (and other cc module types) are all
instances of cc.Module. So, to differentiate between them and make
sure that only appropriate library instances can be added to
native_shared/static_libs this adds a special sdkMemberTypes field to
Module which if set specifies the SdkMemberTypes the module supports.
If it is not set then the module type cannot be used in the sdk at all.
Corrects an issue with one of the tests where a prebuilt cc
library was added to the sdk instead of a source cc library.
Adds a new test to ensure that cc_library_(shared|static)_host module
types work with the sdk as well and another test to ensure that
cc_library can be used as either.
Bug: 142918168
Test: m checkbuild
Change-Id: I359cdbdd15328ca571f276d2b6ce9a229ebb2c86
prebuilts.
This runs Soong in skip-make mode, using normal in-make mode only to query
platform versions.
The same ${OUT_DIR} cannot be used for both skip-make and in-make builds,
because Soong generates a smaller build.ninja file in in-make builds where
many build targets are expected to be provided by the mk files. Thus this
script avoids using ${OUT_DIR} if it's an in-make build, defaulting instead
to out-aml/.
The script is based on build-ndk-prebuilts.sh, but uses a separate Soong
variable Aml_abis to enable the appropriate target architectures for
Mainline modules. Aml_abis is very similar to Ndk_abis, except "armeabi-v7a"
is used instead of "armeabi", which is necessary to match prebuilt
dependencies, e.g. for LLVM.
Test: build/soong/scripts/build-aml-prebuilts.sh libart libdexfile_external
(verify that libraries for arm, arm64, x86, x86_64 are built)
Test: build/soong/scripts/build-aml-prebuilts.sh \
out-aml/soong/.intermediates/external/conscrypt/conscrypt-module-sdk/android_common/conscrypt-module-sdk-current.zip
(verify that the zip file contains libconscrypt_jni.so's for all four arches)
Test: build/soong/scripts/build-aml-prebuilts.sh com.android.art.{release,debug,testing,host}
(verify that the build completes)
Test: Two identical build/soong/scripts/build-aml-prebuilts.sh runs after each other
(verify that the 2nd run completes both Soong and ninja steps quickly without any building)
Change-Id: I35712f9f8f0b1cbb77107314c5927c6720e6c3bf
This change modifies the location of generated compdb file from
$ANDROID_BUILD_TOP to where compdbOtuputProjectsDirectory points to,
under $OUT_DIR. This is especially required for the build environment
that maps $ANDROID_BUILD_TOP as read-only, such as Gitc.
Test: m SOONG_GEN_COMPDB=1 nothing
examine generated compile_commands.json
Signed-off-by: Changyeon Jo <changyeon@google.com>
Change-Id: I86700f89b613a443a33982ecd5501b0f68a62be7
When a java_sdk_library module is added, both impl jar and permission
xml files are packaged together.
For example, when a java_sdk_library "foo" is listed, following two
entries will be in an APEX package.
/javalibs/foo.jar
/etc/permissions/foo.xml
Bug: 145474221
Test: m com.android.cronet
deapexer list com.android.cronet.apex
Change-Id: If5883c02255e9309f20810b1532d3fbe73bf4e95
* changes:
Dedup system modules and sdk library module type registration
Dedup java genrule module type registration
Dedup droiddoc module type registration
This fixes JIT-zygote builds (b/146462581). The fix is a workaround:
boot image location is computed from boot image filename instead of
using the pre-computed location from the module dexpreopt config.
Currently parts of the dexpreopt module config use boot image name
that is hard-coded in Makefiles, and other parts use boot image name
that is generated by Soong. This is exacerbated by the fact that
"default" boot image config in JIT-zygote builds consists partly of
the "apex" boot image, and partly of "boot" boot image.
Test: walleye_jitzygote-userdebug builds.
Bug: 146462581
Change-Id: I9a91fc48e54d7d43abec2cb2b5a11e3581db380b
Effectively adds the cc_defaults module type to the set that are
registered for tests that rely on cc default deps so needed to remove
a few references of that.
Test: m checkbuild
Bug: 146540677
Change-Id: I9df3d33a0cf3f6b22d270efed8366d0183eccaec
This fixes an issue that arises when deduping cc build component
registration code.
The fuzzer and fuzzer_deps post deps mutators were not previously
added when running cc tests. That meant the tests were not actually
testing the same behavior as at runtime.
Adding the mutators breaks the TestFuzzTarget test as the mutator
changes the variant of the fuzz_smoke_test that is created and so the
test fails to find it.
This fixes the test by correct the variant name.
Test: m checkbuild
Bug: 146540677
Change-Id: I9d2be0023affb7722f0399663fa18a2a5fb610d8
This fixes an issue that arises when deduping cc build component
registration code.
The sanitize_runtime_deps and sanitize_runtime post deps mutators were
not previously added when running cc tests. That meant the tests were
not actually testing the same behavior as at runtime.
Adding the mutators breaks the TestFuzzTarget test as the mutator adds
libclang_rt.ubsan_standalone-aarch64-android as a dependency of libc++
and the former is not available.
This fixes the test by adding the missing dependency as a cc prebuilt
shared library.
Test: m checkbuild
Bug: 146540677
Change-Id: Ie13c7e6fcefef7d9cb1cc5364be3dc563ce40de5
The cc.GatherRequiredDepsForTest() method returns some default module
definitions that are required when using cc module types like
cc_library. Previously, the registration of the module types and
mutators needed to process those default definitions was duplicated
in the test config initialization.
This change removes that duplicated code and replaces it with calls
to cc.RegisterRequiredBuildComponentsForTest(ctx) which registers all
the required build components.
Test: m checkbuild
Bug: 146540677
Change-Id: I80b6913c5691ff164ce9d308b9e1da24940f2d42
Module type and singleton type names have to be unique but duplicates
are not checked when the relevant android.Register...() func is called.
Instead they are collated in lists and then registered with the Context
later on, at which point duplicates are detected. That loses
information that can be helpful in fixing the issue.
This is not an issue when testing as the module and singleton types
are registered directly with the Context.
This change adds duplicate detection to the initRegistrationContext
Register... methods prior to calling the android.Register... methods
which should make it easier to detect duplicates registered from an
init() function.
Test: m checkbuild
Bug: 146540677
Change-Id: I7f1a4b649072867717a9829c737a44454b12266c
Some tests were changed as they were using the wrong name for the
droiddoc_exported_dir module type.
Test: m checkbuild
Bug: 146540677
Change-Id: If57404760d2df3757c93e237696359355cf0c96e
Add OutputFileForModule and OutputFilesForModules to get paths from
OutputFileProducers.
Bug: 122332855
Test: m checkbuild
Change-Id: I2e9aeeb55987742077250390cdb804ba22e79442
sh_binary modules should implement HostToolProvider so that they
can be used in genrules. Install the script and then return
the installed path.
Also remove the unused SourceFilePath method.
Bug: 122332855
Fixes: 146496647
Test: m checkbuild
Change-Id: I191ce4eef1d50ac0b6a296b819feec6d6a18e753
The registration of module types and singletons is duplicated between
init() functions that register them for use in the build runtime and
test context creation code that registers them for testing.
This is a proof of concept for a mechanism that will allow the code
to be shared. It defines a RegistrationContext interface that is
implemented by both the TestContext and the new initRegistrationContext
type. An instance of the the latter is available through the
InitRegistrationContext variable.
The intent is that the registration of the module types and singleton
types will be extracted from the init() function into a separate
function that takes a RegistrationContext parameter. That method is
called from init() passing in the InitRegistrationContext and from a
test passing in the TestContext. Something like this:
func init() {
RegisterBuildComponents(android.InitRegistrationContext)
}
func RegisterBuildComponents(ctx android.RegistrationContext) {
ctx.RegisterModuleType(....)
....
}
A test would do something like this:
ctx := android.NewTestContext()
RegisterBuildComponents(ctx)
Test: m nothing
Change-Id: I97173cabb6d6cf7ce98fdb5f73418438b1997b35
The script now expects flags for filenames and no longer
just writes to stdout. Write full merged config too.
Test: m libcore-platform-compat-config
Change-Id: Ia524a8c271725665772c9543baecd4f494ee86f1
The module framework is now a build-only library whose purpose is to
provide hidden APIs from the non-updatable part of the platform and APIs
from the modules. Merging updatable_media_stub to framework, like the
stub libraries from other modules.
As a result, updatable_media_stub can be removed from DefaultLibraries.
Bug: N/A
Test: m
Exempt-From-Owner-Approval: cherry-pick from internal
Merged-In: I7f80716119ad6ac627e5666def9fe17112dcde3b
(cherry picked from commit 4c258d282b)
Change-Id: I7f80716119ad6ac627e5666def9fe17112dcde3b
Paul Duffin