Adds the prefer_rlib property to allow linking libstd statically for
device rust binaries. This also changes the default behavior of rustlibs
to also prefer rlib linkage. This is because dylibs do not provide
rlib-libstd variants and always link in libstd dynamically. Thus a
binary requesting libstd rlib linkage should not attempt to link against
dylibs that link libstd dynamically.
Bug: 168729404
Test: New Soong test passes.
Change-Id: Idf8dfbbce8fd936f55a3fb323b17a1a7f0ee954e
I2954bb21c1cfdeb305f25cfb6c8711c930f6ed50 switched normalizeVersions
to work on ApiLevels, which inadvertantly caused it to return "current"
instead of "10000" for libraries that specify "current" in their stubs
property. ChooseSdkVersion couldn't handle "current" because it was
manually converting the version to an int. Switch ChooseSdkVersion
to use ApiLevels instead so that it can handle "current".
Test: m checkbuild
Change-Id: Id412359e092483ba419118dd03bc206fae702a96
There is no need to export the linkdirs from the SourceProvider
variant. Remove them to reduce differences in build.ninja from
a later patch that moves the flag exporting into compile(), which
isn't called by the SourceProvider variant.
Test: m checkbuild
Change-Id: I9c4d3a336a07cb9074376303bfa277c05d893b98
Whole_static_libs required custom error checking when
AllowMissingDependencies was set because it could end up depending
on an empty list of objects, which would leave nothing in the
dependency tree that had been replaced with an ErrorRule.
Reuse the prebuilts case to depend on the .a file when there
are no objects and remove the custom error handling.
Test: TestEmptyWholeStaticLibsAllowMissingDependencies
Change-Id: Ic3216235f7e5ae8b5b6ab31ef2ca35c3994d82aa
Mulitple init_rc files may be necessary to support multilib binaries
with different installed names.
Test: m checkbuild
Change-Id: I17d3a3b2346a25b230e5a325deb0d78f0ee045f0
When generating stubs source for contributions to the public API keep
the Javadoc comments from the input source so that the stubs source can
be used as input to the metalava invocation that creates the stubs from
which the public Javadoc is generated.
This is needed to fix an issue with conscrypt's contributions to the
public API, i.e. SSLEngines and SSLSockets where the Javadoc comments
were not present in the generated Javadoc.
Test: Built offline-sdk-docs with and without the change and
diffed them. The only difference was the timestamp.js
file and they now included proper documentation for the
SSLEngines/SSLSockets classes.
Bug: 169162018
Change-Id: I1b50cff3b91766ce261b2f8e798b77ebc6faac70
Until now, source provider modules duplicated the rule to generate the
source for each variant. Add a inter-variant dependency between the
source and the other variants (e.g. rlib, dylib) to avoid this
duplication. Add documentation on this behaviour.
Bug: 162588681
Test: m
Change-Id: I41c9e2220f8875245415e17374852e540dfd47ec
Both will create a nested property set, that may be merged with an
existing one.
Test: m nothing
Bug: 151303681
Change-Id: I30696ba3eb8960ca6fa54c9ee2cf6229ab9f5da9
In the previous mode, building Rust code using certain intrinsics would
fail on arm32 since our runtime is armv7, but our codegen was arm.
Test: cd external/rust; mma
Bug: 169245712
Change-Id: Ie800486b39325486f5ff319e46632df2a6987391
Experimental global ThinLTO mode for compilation time evaluation.
Bug: 169004486
Test: GLBOAL_THINLTO=true m
Change-Id: I2ff06397be8b65c7972f1e5f09ab1496949567ee
Adds the c_std and cpp_std properties to rust_bindgen, and use the
default values from cc if these are undefined.
This assumes by default that the header extension indicates whether
the header is a C or C++ header file. This default can be overridden
by setting either c_std or cpp_std.
Test: Soong tests pass, "-std=" arg included in bindgen calls
Bug: 163580541
Change-Id: I5b0d3b8eae9a54dd91d8a0aca583d7803a344f27
They used to be listed to not have this treatment, but we are
baselining the existing warnings and making them errors instead.
Bug: 154317059
Test: m
Change-Id: I306b5a07d1b771cc0061aaac44f881f40fbe85ed
Merged-In: I306b5a07d1b771cc0061aaac44f881f40fbe85ed
Pass the value of system_shared_libs to the Android.mk world, so that
prebuilt ELF check can exclude them from fix suggestions.
Bug: 141925662
Test: Write a bad cc_prebuilt_library module and check fix suggestions
Change-Id: I0cc61821765507180ce6a582bf8125a192f83a57
linux_bionic_arm64 is the new host target using Bionic as libc. This
change adds a new Soong config Host_bionic_arm64 that enables the
target.
This change also amends firstTarget() function to handle the case when
the available targets for an OS have different arch families. In that
case, first target is selected for each of the arch family. This is
needed in the (rare) care when both linux_bionic_x86_64 and
linux_bionic_arm64 targets are enabled.
Bug: 159685774
Test: add "Host_bionic_arm64": true to out/soong/soong.config and run
./build/soong/soong_ui.bash --make-mode --skip-make
out/soong/host/linux_bionic-arm64/bin/aarch64-linux-bionic/crosvm
Change-Id: I0885e49379f6ee216c6e82adbb1230655171a7a5
A host target is considered as being cross-compiled when the target
can't run natively on the build machine. For example, linux_glibc/x86_64
is a non-cross target on a standard x86/Linux machine, but is a cross
host on Mac. Previously, whether cross or not was a static attribute of
an OsType. For example, Windows was always considered as cross host,
while linux_bionic was not. This becomes a problem when we support more
host targets like linux_bionic/arm64 which should be cross-host on
standard x86/Linux machines.
This change removes HostCross from the OsClass type and instead adds a
property HostCross to the Target type. When a target is being added, it
is initialized to true when the target can't run natively on the current
build machine.
Bug: 168086242
Test: m
Change-Id: Ic37c8db918873ddf324c86b12b5412952b0f2be2
We should override log-dir with the environment variables if its set.
This is needed in our integration tests and generally to allow for
user-overrides.
Test: RBE_log_dir=`pwd`/rbelogs mmma external/boringssl
Change-Id: I3d316a2d60122c42f5c3b5dfede4037362a7b5f1
The test case I removed is invalid. The codename has had its int
assigned, but the config claims it is not final.
If this ever does need to be supported it's just a matter of making
sure the Q -> 29 mapping (or whatever) in the finalized codenames map
in android/api_levels.go.
Test: treehugger
Bug: http://b/154667674
Change-Id: I4f42ec2fd4a37750519ee3937938a1c65b6bb1e8
Keeping the int constant around for now as FutureApiLevelInt because
it's still useful in places that haven't adopted ApiLevel yet for
testing if their non-ApiLevel API level is current or not.
Test: treehugger
Bug: http://b/154667674
Change-Id: I47a7012703f41fdeb56f91edf9c83afa93042deb
Bug: http://b/119560349
Bug: http://b/168925229
To build with PGO instrumentation, the link step also needs
-fprofile-generate flag. Omitting this will result in a linker error.
This surfaces if module A depends on module B but PGO is used only for
module B.
Previous uses of PGO were avoiding or working around the issue but to
accommadate recent changes, this CL propagates the PGO linker flag to
module A.
Test: pgo-coral-config1 in release branch, TH
Change-Id: I12f6243152d4f5ea5526fbce03c25dba232ddab7
Treehugger Robot