Bug: 118016875
Test: Added 'interface' lines to an init_rc file and observed errors
when misspelled or missing entire inheritance hierarchy.
Change-Id: I681420f15539742d8415808b2a0dcbf0bf6faaf1
Without this change "adb reboot recovery" leads to normal boot.
Change-Id: I361d0a1f6f6f2c57f3dc80102c21970b462c9b9c
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
- unused
- using binder requires twoway calls (since getting a service from
servicemanager requires two calls)
Bug: 135768100
Test: N/A
Change-Id: Idc41f487bad2d8343e99ded98812f3a84e2b8e37
android-base:
* Add NOLINT for expanding namespace std for std::string* ostream
overload
libdm:
* Fix missing parentesis around macro parameters
init:
* Fix missing CLOEXEC usage and add NOLINT for the intended
usages.
* Fix missing parentesis around macro parameters
* Fix erase() / remove_if() idiom
* Correctly specific unsigned char when intended
* 'namespace flags' should be signed, since 'flags' it signed for
clone()
* Add clear to property restore vector<string> to empty after move
* Explicit comparison against 0 for strcmp
Test: build
Change-Id: I8c31dafda2c43ebc5aa50124cbbd6e23ed2c4101
Start and wait on a console if androidboot.first_stage_console=1 is
present on the kernel command line. This only works on eng and
userdebug builds.
Change-Id: I978e9390a89509431b399ea58b284736b27eeb1b
Test: Adding a misspelling to an init_rc's interface line and observing
build failure.
Bug: 77646540
Change-Id: I58f66d73f0bd9b4203e8259161843b56ad428d73
In retrospect, these always should have been header only. We don't
need setgroups() anymore either, since we have the right symbols now.
Test: build
Change-Id: If6fbf6f8ee288ed261576207d90a7ec5674853f9
By moving it into builtins.cpp..., but that's less bad than it is
now, especially since this is defunct in code targeting Q+. Remove
the guards that init.h isn't being included by other files too as it's
not useful anymore.
Test: build
Change-Id: Ic564fcff9e8716ec924098b07a8c9d94ca25f960
There's no fundamental reason to store this aside. That property can
only be written by init, so it's not likely that we're going to
corrupt it.
Test: boot and use serial console
Change-Id: I9248fbaf959ea913d09add829d4cb509af99d570
It's been a long standing problem that init calls fs_mgr functions
synchronously and therefore stops handling properties, which causes
deadlocks if either fs_mgr, or vdc, or vold attempt to set
properties.
Previous work, b/21904461, shows that there is a large performance
penalty for adding any amount of locking to properties, so moving
property service into its own thread generically is not a viable
option. However, we can be sure that init is not setting properties
while the fs_mgr functions are running, so we can poll the property
socket in a thread while we call these functions.
The other alternative would have been to separate the fs_mgr functions
into smaller pieces and revisit the main init loop between each
piece. Unfortunately, this would be difficult, since
fs_mgr_mount_all() calls out to different processes via logwrapper,
which synchronously polls on a logging FD from the child, among other
complexities that would make this strategy much more difficult than it
would be worth.
Bug: 21904461
Test: device boots, including when setting property in
fs_mgr_mount_all()
Change-Id: Ib0b7123024035884f9d90f9b489c1e2f5a2e1707
Modprobe functionality is required both within first stage init and also
as a standalone binary. Create a library for this using and extending
the logic in modalias_handler.cpp.
First stage init will attempt to load modules from /lib/modules.
Bug: 129780532
Change-Id: Ie3582358fd839c2f64e1b386b30ed551a86aef5d
Init had some pretty horrid Error() << StringPrintf(...) calls that
are all much better replaced by Errorf(...) now.
Test: build, check that keyword_map errors look correct
Change-Id: I572588c7541b928c72ae1bf140b814acdef1cd60
This change is to support importing property file with its path
variations.
By substitute its filename with another, it can be used to handle
runtime varying filename within single binary.
Here's an example of usage in property defined file.
import /odm/build_${ro.boot.product.hardware.sku}.prop
Bug: 132592551
Test: boot a device and checks above example import statement in
"/odm/build.prop" loading expanded filename correctly
Change-Id: If3fdcf620a5d717e0930b1e4e58261bc8f79ec24
Ueventd can't set properties currently, but this is an artificial
limitation, since ueventd communicates to init that it has finished
cold boot via a file, and init polls this file instead of returning to
the epoll loop, where properties are handled.
This change replaces that file with a property and thus frees ueventd
to be able to set properties.
Bug: 62301678
Test: boot, check that properties are set
Change-Id: I985688e9299456efcb2dfeef9b92668991aa9c05
Now that Result<T> is actually expected<T, ...>, and the expected
proposal states expected<void, ...> as the way to indicate an expected
object that returns either successfully with no object or an error,
let's move init's Result<Success> to the preferred Result<void>.
Bug: 132145659
Test: boot, init unit tests
Change-Id: Ib2f98396d8e6e274f95a496fcdfd8341f77585ee
This change fixes a bug that *.rc files in APEXes are not read when the
APEXes are flattened. This was because init used "/apex/*@*/etc/*.rc"
glob pattern to find the files, which gives 0 result with flattened
APEXes; with flattend APEXes /system/apex is just bind-mounted to /apex,
and therefore, the name@version directories don't exist.
Fixing the issue by globing /apex/*/etc/*.rc and filter-out the paths
with @ to avoid double parsing the *.rc files in case of non-flattend
APEXes.
Bug: 134067086
Test: revert I75ec6b69cca1cef071b50fac9a4cf8b8ceddb142
build sdk_gphone_x86_64 and record a video in the camera app.
The recording works. `ps -A | grep media.swcodec` shows media.swcodec process.
`atest CtsStatsdHostTestCases:android.cts.statsd.atom.UidAtomTests#testAudioState` passes
Test: build sdk_phone_x86_64 and do the same.
Change-Id: I00af1910a8e8a330addc4c6903e5f3695aeb6865
The Result, Error, ErrnoError are quite generic. Moving them from init
to libbase so that they can be used from other places.
Bug: 132145659
Test: libbase_test
Change-Id: Id774a587f74380fadd7a0fc88c0aa892c3d9a489
Factors out utility functions into service_utils.h/cpp, so that they
can be reused by the upcoming native zygote.
Bug: 133443795
Test: Build and boot cuttlefish.
Change-Id: I0531b6f17561119c8cc33dd9ba375b351747fcfe
This change factors out functions that handle selabels from
selinux.h/cpp into selabel.h/cpp. This allows util.cpp to be used by
the upcoming native zygote without a bunch of define flags that are
required for selinux.cpp.
Bug: 133443795
Test: Build and boot cuttlefish.
Change-Id: Ie238a96c6407c6698a605dd8803c1727abfaae7b
Currently, if init encounters a fatal issues it reboots to fastboot
but this may be not desirable in all cases, especially the case of
critical services crashing. Therefore this change adds the ability
for vendors to customize the reboot target via the
androidboot.init_fatal_reboot_target= kernel command line.
This applies to all LOG(FATAL) messages as well as fatal signals in
userdebug/eng builds, except for signals before logging is enabled in
first stage init.
Bug: 121006328
Test: device reboots to configurable target with LOG(FATAL)
Test: device reboots to configurable target after a segfault in the
various stages of init
Test: device reboots to fastboot without a configured target
Change-Id: I16ea9e32e2fee08dece3d33b697d7a08191d607b
Dump init stacks when aborting either due to LOG(FATAL) or in
userdebug/eng builds due to signals, including signals from
sanitizers.
Doesn't work for static first stage init yet, b/133450393 tracks
that.
Also, ensure that LOG(FATAL) in child processes calls abort() in all
stages of init, not just 2nd stage init.
Bug: 131747478
Test: abort init in various ways and see stacks
Test: hang or crash in backtrace handler and see child reboot
Change-Id: Ib53b5d3e7e814244203f875de016ada9900dfce8
When TARGET_FLATTEN_APEX is true (= ro.apex.updatable is unset or set to
false), apexd is not used to activate the built-in flattened APEXes.
Init simply bind-mounts /system/apex to /apex.
However, there is a special case here. The runtime APEX is installed as
either /system/apex/com.android.runtime.debug or
/system/apex/com.android.runtime.release, whereas it should be activated
on /apex/com.android.runtime - without the .debug or .release suffix.
To handle that case, the build system creates an empty directory
/system/apex/com.android.runtime and the .debug or .release directory
is bind-mounted to the empty directory by init at runtime.
This change also fixes a minor bug that native watchdog is triggered
for all post-apexd processes regardless of whether ro.apex.updatable
is true or not. Since apexd is expected to shutdown itself when ro.apex
.updatable is false, we don't trigger the watchdog in that case.
Bug: 132413565
Bug: 133305381
Test: marlin and sdk_gphone are bootable
Merged-In: I219465b8b81decb960e2c5f46bab6e0768b31317
Change-Id: I219465b8b81decb960e2c5f46bab6e0768b31317
(cherry picked from commit f93088ba2b)
Android-base has an implementation of the future std::expected<>.
This provides the same baseline functionality as Result<>, so use it
instead of our own version.
Bug: 132145659
Test: boot, init unit tests
Change-Id: I11e61bcb5719b262a6420483ed51a762826a9e23
In device root directory, we have the following symlinks:
- /odm/app -> /vendor/odm/app
- /odm/bin -> /vendor/odm/bin
- /odm/etc -> /vendor/odm/etc
...
This allows the Generic System Image (GSI) to be used on both devices:
1) Has a physical odm partition, where those symlink will be hidden
when /odm is used as the mount point
2) Has no physical odm partition and fallback to /vendor/odm/.
We can't just have the symlink /odm -> /vendor/odm, because the former
devices won't have /vendor/odm directory, which leads to mount failure
when the mount point /odm is resolved to /vendor/odm.
The existing /vendor/odm/build.prop won't be loaded in the latter
devices, because there is no symlink
- /odm/build.prop -> /vendor/odm/build.prop.
Note that init blocks reading through direct symlinks (O_NOFOLLOW) so
the above symlink won't work either. This CL moves the odm build.prop
to /odm/etc/build.prop for init to load it (symlinks in earlier
components of the path will still be followed by O_NOFOLLOW).
Bug: 132128501
Test: boot a device and checks /odm/etc/build.prop is loaded
Change-Id: I0733c277baa67c549bb45599abb70aba13fbdbcf
Merged-In: I0733c277baa67c549bb45599abb70aba13fbdbcf
Importing rc files during mount_all was at best a stop gap until
Treble's first stage mount and at worst a bad idea. It doesn't have a
reason to exist now that first stage mount exists and is required, and
always had edge cases where init could not handle loading some aspects
of scripts after it had started processing actions.
This change removes this functionality for devices launching after Q.
Test: devices boot
Change-Id: I3181289572968637b884e150d36651f453d40362
Tom Cherry