It's possible that a device map has memory controlled by a single entry
device driver. Thus, you can deadlock if a process is touching that
device memory and we try to unwind it and also touch that device memory.
Simply skip any attempts to step through, or get function names from
device memory maps.
Bug: 36130325
Test: Ran new unit tests, ran bionic unit tests, ran art ThreadStress.
Change-Id: Ibc62d7ec8106c619ee08968f05e04aea55d7cbfa
scheduleUpdate forces a healthd battery update,
which will notify all listeners.
Test: Manual (strace -p $healthd_pid)
Bug: 32645990
Change-Id: I8b19f79b633ca8988f0e3dd5be14757f6421ddcb
- Emergency shutdown just marks the fs as clean while leaving fs
in the middle of any state. Do not use it anymore.
- Changed android_reboot to set sys.powerctl property so that
all shutdown can be done by init.
- Normal reboot sequence changed to
1. Terminate processes (give time to clean up). And wait for
completion based on ro.build.shutdown_timeout.
Default value (when not set) is changed to 3 secs. If it is 0, do not
terminate processes.
2. Kill all remaining services except critical services for shutdown.
3. Shutdown vold using "vdc volume shutdown"
4. umount all emulated partitions. If it fails, just detach.
Wait in step 5 can handle it.
5. Try umounting R/W block devices for up to max timeout.
If it fails, try DETACH.
If umount fails to complete before reboot, it can be detected when
system reboots.
6. Reboot
- Log shutdown time and umount stat to log so that it can be collected after reboot
- To umount emulated partitions, all pending writes inside kernel should
be completed.
- To umount /data partition, all emulated partitions on top of /data should
be umounted and all pending writes should be completed.
- umount retry will only wait up to timeout. If there are too many pending
writes, reboot will discard them and e2fsck after reboot will fix any file system
issues.
bug: 36004738
bug: 32246772
Test: many reboots combining reboot from UI and adb reboot. Check last_kmsg and
fs_stat after reboot.
Change-Id: I6e74d6c68a21e76e08cc0438573d1586fd9aaee2
Also start hals where hwservicemanager was started before.
Bug: 36278706
Test: internal marlin+angler boots
Change-Id: Ia55d2ef747fcbd086a09e1bb856824b14343118b
Bug: 33241851
Test: No changes needed for modules not using VNDK.
For VNDK, enable BOARD_VNDK_VERSION in BoardConfig.mk
and add libcutils to modules that need these headers.
Change-Id: I6102778aab35ed26a5ddde11230502dcd4edc852
Some extra initialization needs to occur before calling the local/remote
GetFunctioneName.
Also, cleanup the test code a bit:
- Make all local functions static.
- Create a common function to create and finish remote processes.
- Remove unused function.
- Fix the formatting a bit by making it match clang format.
Test: Ran the unit tests.
Change-Id: I998bed1378d582df59fdf9263df6f208db5d795a
Currently, if init crashes, the kernel panics. During development, we
would like to catch this crash before the kernel panics and reboot
into bootloader. This will prevent boot looping bad configurations,
particularly desired in test labs where manual intervention would
otherwise be required to reset the devices.
Keep the existing behavior for user builds, as init crashes should be
rare for production builds and rebooting the device is the correct
behavior for end users.
Bug: 34147472
Test: Boot bullhead userdebug, force init to crash, check that the
device is in bootloader
Test: Boot bullhead user, force init to crash, check that the kernel
panics and the device reboots as it did previously
Change-Id: Iab3d45ed0d1f82ffaad2a0835d9ca537c0516421
Normally 'writepid' is used to add a process to a particular cpuset. However
certain systems with big/small cores might need to specify a default cpuset for
system processes which do not explicitly specify one. Add an option to use
'ro.cpuset.default' system property to specify default cpuset for system processes
which do not explicitly write to /dev/cpuset/... with 'writepid' option.
The cpuset name specified in ro.cpuset.default is just the cpuset name, e.g.
'/system-background', '/foreground', or simply '/' for the "root" cpuset.
Bug: 28550814
Test: `m -j32` succeeds for aosp_sailfish-eng. Phone boots successfully.
Also tested manually with debug trace messages on emulator with different
combinations of values for 'ro.cpuset.default'.
Change-Id: I501727fa5ee3f4bb7a938fa104b81a404b616633
Add reading of vendor file-system config files
/oem/etc/fs_config_dirs and /oem/etc/fs_config_files.
Order of interpretation (for dirs and files respectively):
- /system/etc/fs_config_dirs or /system/etc/fs_config_files
- /vendor/etc/fs_config_dirs or /vendor/etc/fs_config_files
- /oem/etc/fs_config_dirs or /oem/etc/fs_config_files
- internal android_dirs[] or android_files[] structures.
No restrictions are placed on the oem file-system config files,
although the developer is advised to restrict the scope to the /oem
file-system since the intent is to provide support only for
customized portions of oem.img.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I56f3fed5efa44d622a9a110937dbc949083d44ae
Add reading of vendor file-system config files
/vendor/etc/fs_config_dirs and /vendor/etc/fs_config_files.
Order of interpretation (for dirs and files respectively):
- /system/etc/fs_config_dirs or /system/etc/fs_config_files
- /vendor/etc/fs_config_dirs or /vendor/etc/fs_config_files
- internal android_dirs[] or android_files[] structures.
No restrictions are placed on the vendor file-system config files,
although the developer is advised to restrict the scope to the /vendor
file-system since the intent is to provide support only for
customized portions of vendor.img.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I4077bd6afcda2ee16189b2eb3c322af15205bbb9
Sort android_files[] first by requirements, grouping, specificity and
finally by alphanumeric order.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I92c4090eac0067e0327ac7c8dde229747893d585
Sort android_dirs[] first by requirements, grouping, specificity and
finally by alphanumeric order.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: Iff579600b05d7b2a0b9fc7d9e9d897e0bb69aebd
We have seen cases when threads in this cgroup not scheduled for more than
a few seconds in heavy workload situation and causing device freeze.
In Linux, multiple threads placed in ROOT cgroup cause the CPU resource to
be split per thread, rather than per group.
Currently we have many threads in ROOT cgroup, which makes threads in
bg_non_interactive cgroup to have "tiny" CPU resource other than 5%
quota defined.
Bug: 34193533
Test: on marlin
Change-Id: I7721f6196560fbedf6265e8b6db130cec9edefd7
Comply with clang-format. Adjust some comments.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I459a08b4dc4333ab3d75207621a27587849386a5
read_file() does not close its fd if either stat() fails or the file
has group/world writable permissions.
Use unique_fd to ensure that all return paths close the fd and make
the same change to write_file() for consistency.
Replace PLOG() with LOG() after a simple if conditional, that does not
set errno.
Old:
init: skipping insecure file '/data/bootchart/header': No such device or address
New:
init: skipping insecure file '/data/bootchart/header'
Test: Cause an invalid file read and check the error log
Test: Ensure non-error read_file() and write_file() work
Change-Id: Ib15d94e38362e335d671d30b36aa5605254ec7ab
Recent changes to OTA updates started "blaming" network usage on the
system UID, which makes it difficult to triage incoming bugreports
that claim heavy network usage. Instead, this change gives OTA
updates an explicit UID to make triage easier.
Test: builds, boots
Bug: 36130264
Change-Id: I0a0cc009f3d891b19b419bc12cd237ef8ac64519
Switch the jdwp control socket to SOCK_SEQPACKET so we don't have to
worry about short reads for the PID.
Bug: http://b/36411868
Test: adb jdwp
Change-Id: I908b88e93b1e0ca2895eb8e777d8438a7bbfa92a
Also fixed InvalidNumberArgs that broke when usage() was moved out from
bugreport.cpp.
Fixes: 26354314
Bug: 28054087
Test: m -j32 adb_test && ./out/host/linux-x86/nativetest64/adb_test/adb_test --gtest_filter=BugreportTest.*
Change-Id: I7be5ef7de0fb0d339dc80a2abc816e1c905deb22
If a process opens a JDWP socket, but crashes before writing the full
PID, adbd will spin forever.
Bug: http://b/36411868
Test: none
Change-Id: I1811759e15c3d9c819685c5fc159a566bd4bc842
Some classes referenced in comments in libcore.tzdata.update2 have
moved to libcore.tzdata.shared2.
Bug: 31008728
Test: mmm system/core/tzdatacheck
Change-Id: I390b375ab8fefbb46e69f4534000ff43ffcceae8
Treehugger Robot