qemu/hw/arm/versatilepb.c

407 lines
12 KiB
C
Raw Normal View History

/*
* ARM Versatile Platform/Application Baseboard System emulation.
*
* Copyright (c) 2005-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/devices.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#include "hw/pci/pci.h"
#include "hw/i2c/i2c.h"
#include "hw/boards.h"
#include "sysemu/blockdev.h"
#include "exec/address-spaces.h"
#include "hw/block/flash.h"
#define VERSATILE_FLASH_ADDR 0x34000000
#define VERSATILE_FLASH_SIZE (64 * 1024 * 1024)
#define VERSATILE_FLASH_SECT_SIZE (256 * 1024)
/* Primary interrupt controller. */
typedef struct vpb_sic_state
{
SysBusDevice busdev;
MemoryRegion iomem;
uint32_t level;
uint32_t mask;
uint32_t pic_enable;
qemu_irq parent[32];
int irq;
} vpb_sic_state;
static const VMStateDescription vmstate_vpb_sic = {
.name = "versatilepb_sic",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(level, vpb_sic_state),
VMSTATE_UINT32(mask, vpb_sic_state),
VMSTATE_UINT32(pic_enable, vpb_sic_state),
VMSTATE_END_OF_LIST()
}
};
static void vpb_sic_update(vpb_sic_state *s)
{
uint32_t flags;
flags = s->level & s->mask;
qemu_set_irq(s->parent[s->irq], flags != 0);
}
static void vpb_sic_update_pic(vpb_sic_state *s)
{
int i;
uint32_t mask;
for (i = 21; i <= 30; i++) {
mask = 1u << i;
if (!(s->pic_enable & mask))
continue;
qemu_set_irq(s->parent[i], (s->level & mask) != 0);
}
}
static void vpb_sic_set_irq(void *opaque, int irq, int level)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
if (level)
s->level |= 1u << irq;
else
s->level &= ~(1u << irq);
if (s->pic_enable & (1u << irq))
qemu_set_irq(s->parent[irq], level);
vpb_sic_update(s);
}
static uint64_t vpb_sic_read(void *opaque, hwaddr offset,
unsigned size)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
switch (offset >> 2) {
case 0: /* STATUS */
return s->level & s->mask;
case 1: /* RAWSTAT */
return s->level;
case 2: /* ENABLE */
return s->mask;
case 4: /* SOFTINT */
return s->level & 1;
case 8: /* PICENABLE */
return s->pic_enable;
default:
printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset);
return 0;
}
}
static void vpb_sic_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
vpb_sic_state *s = (vpb_sic_state *)opaque;
switch (offset >> 2) {
case 2: /* ENSET */
s->mask |= value;
break;
case 3: /* ENCLR */
s->mask &= ~value;
break;
case 4: /* SOFTINTSET */
if (value)
s->mask |= 1;
break;
case 5: /* SOFTINTCLR */
if (value)
s->mask &= ~1u;
break;
case 8: /* PICENSET */
s->pic_enable |= (value & 0x7fe00000);
vpb_sic_update_pic(s);
break;
case 9: /* PICENCLR */
s->pic_enable &= ~value;
vpb_sic_update_pic(s);
break;
default:
printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset);
return;
}
vpb_sic_update(s);
}
static const MemoryRegionOps vpb_sic_ops = {
.read = vpb_sic_read,
.write = vpb_sic_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static int vpb_sic_init(SysBusDevice *dev)
{
vpb_sic_state *s = FROM_SYSBUS(vpb_sic_state, dev);
int i;
qdev_init_gpio_in(&dev->qdev, vpb_sic_set_irq, 32);
for (i = 0; i < 32; i++) {
sysbus_init_irq(dev, &s->parent[i]);
}
s->irq = 31;
memory_region_init_io(&s->iomem, &vpb_sic_ops, s, "vpb-sic", 0x1000);
sysbus_init_mmio(dev, &s->iomem);
return 0;
}
/* Board init. */
/* The AB and PB boards both use the same core, just with different
peripherals and expansion busses. For now we emulate a subset of the
PB peripherals and just change the board ID. */
static struct arm_boot_info versatile_binfo;
static void versatile_init(QEMUMachineInitArgs *args, int board_id)
{
ARMCPU *cpu;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
qemu_irq *cpu_pic;
qemu_irq pic[32];
qemu_irq sic[32];
DeviceState *dev, *sysctl;
SysBusDevice *busdev;
DeviceState *pl041;
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
int n;
int done_smc = 0;
DriveInfo *dinfo;
if (!args->cpu_model) {
args->cpu_model = "arm926";
}
cpu = cpu_arm_init(args->cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
memory_region_init_ram(ram, "versatile.ram", args->ram_size);
vmstate_register_ram_global(ram);
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, ram);
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", 0x41007004);
qdev_prop_set_uint32(sysctl, "proc_id", 0x02000000);
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
cpu_pic = arm_pic_init_cpu(cpu);
dev = sysbus_create_varargs("pl190", 0x10140000,
cpu_pic[ARM_PIC_CPU_IRQ],
cpu_pic[ARM_PIC_CPU_FIQ], NULL);
for (n = 0; n < 32; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = sysbus_create_simple("versatilepb_sic", 0x10003000, NULL);
for (n = 0; n < 32; n++) {
sysbus_connect_irq(SYS_BUS_DEVICE(dev), n, pic[n]);
sic[n] = qdev_get_gpio_in(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]);
sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]);
dev = qdev_create(NULL, "versatile_pci");
busdev = SYS_BUS_DEVICE(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0x10001000); /* PCI controller regs */
sysbus_mmio_map(busdev, 1, 0x41000000); /* PCI self-config */
sysbus_mmio_map(busdev, 2, 0x42000000); /* PCI config */
sysbus_mmio_map(busdev, 3, 0x43000000); /* PCI I/O */
sysbus_mmio_map(busdev, 4, 0x44000000); /* PCI memory window 1 */
sysbus_mmio_map(busdev, 5, 0x50000000); /* PCI memory window 2 */
sysbus_mmio_map(busdev, 6, 0x60000000); /* PCI memory window 3 */
sysbus_connect_irq(busdev, 0, sic[27]);
sysbus_connect_irq(busdev, 1, sic[28]);
sysbus_connect_irq(busdev, 2, sic[29]);
sysbus_connect_irq(busdev, 3, sic[30]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!done_smc && (!nd->model || strcmp(nd->model, "smc91c111") == 0)) {
smc91c111_init(nd, 0x10010000, sic[25]);
done_smc = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
if (usb_enabled(false)) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
sysbus_create_simple("pl011", 0x101f1000, pic[12]);
sysbus_create_simple("pl011", 0x101f2000, pic[13]);
sysbus_create_simple("pl011", 0x101f3000, pic[14]);
sysbus_create_simple("pl011", 0x10009000, sic[6]);
sysbus_create_simple("pl080", 0x10130000, pic[17]);
sysbus_create_simple("sp804", 0x101e2000, pic[4]);
sysbus_create_simple("sp804", 0x101e3000, pic[5]);
sysbus_create_simple("pl061", 0x101e4000, pic[6]);
sysbus_create_simple("pl061", 0x101e5000, pic[7]);
sysbus_create_simple("pl061", 0x101e6000, pic[8]);
sysbus_create_simple("pl061", 0x101e7000, pic[9]);
/* The versatile/PB actually has a modified Color LCD controller
that includes hardware cursor support from the PL111. */
dev = sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]);
/* Wire up the mux control signals from the SYS_CLCD register */
qdev_connect_gpio_out(sysctl, 0, qdev_get_gpio_in(dev, 0));
sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL);
sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL);
/* Add PL031 Real Time Clock. */
sysbus_create_simple("pl031", 0x101e8000, pic[10]);
dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
/* Add PL041 AACI Interface to the LM4549 codec */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, sic[24]);
/* Memory map for Versatile/PB: */
/* 0x10000000 System registers. */
/* 0x10001000 PCI controller config registers. */
/* 0x10002000 Serial bus interface. */
/* 0x10003000 Secondary interrupt controller. */
/* 0x10004000 AACI (audio). */
/* 0x10005000 MMCI0. */
/* 0x10006000 KMI0 (keyboard). */
/* 0x10007000 KMI1 (mouse). */
/* 0x10008000 Character LCD Interface. */
/* 0x10009000 UART3. */
/* 0x1000a000 Smart card 1. */
/* 0x1000b000 MMCI1. */
/* 0x10010000 Ethernet. */
/* 0x10020000 USB. */
/* 0x10100000 SSMC. */
/* 0x10110000 MPMC. */
/* 0x10120000 CLCD Controller. */
/* 0x10130000 DMA Controller. */
/* 0x10140000 Vectored interrupt controller. */
/* 0x101d0000 AHB Monitor Interface. */
/* 0x101e0000 System Controller. */
/* 0x101e1000 Watchdog Interface. */
/* 0x101e2000 Timer 0/1. */
/* 0x101e3000 Timer 2/3. */
/* 0x101e4000 GPIO port 0. */
/* 0x101e5000 GPIO port 1. */
/* 0x101e6000 GPIO port 2. */
/* 0x101e7000 GPIO port 3. */
/* 0x101e8000 RTC. */
/* 0x101f0000 Smart card 0. */
/* 0x101f1000 UART0. */
/* 0x101f2000 UART1. */
/* 0x101f3000 UART2. */
/* 0x101f4000 SSPI. */
/* 0x34000000 NOR Flash */
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, NULL, "versatile.flash",
VERSATILE_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
VERSATILE_FLASH_SECT_SIZE,
VERSATILE_FLASH_SIZE / VERSATILE_FLASH_SECT_SIZE,
4, 0x0089, 0x0018, 0x0000, 0x0, 0)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
}
versatile_binfo.ram_size = args->ram_size;
versatile_binfo.kernel_filename = args->kernel_filename;
versatile_binfo.kernel_cmdline = args->kernel_cmdline;
versatile_binfo.initrd_filename = args->initrd_filename;
versatile_binfo.board_id = board_id;
arm_load_kernel(cpu, &versatile_binfo);
}
static void vpb_init(QEMUMachineInitArgs *args)
{
versatile_init(args, 0x183);
}
static void vab_init(QEMUMachineInitArgs *args)
{
versatile_init(args, 0x25e);
}
static QEMUMachine versatilepb_machine = {
.name = "versatilepb",
.desc = "ARM Versatile/PB (ARM926EJ-S)",
.init = vpb_init,
Support default block interfaces per QEMUMachine There are QEMUMachines that have neither IF_IDE nor IF_SCSI as a default/standard interface to their block devices / drives. Therefore, this patch introduces a new field default_block_type per QEMUMachine struct. The prior use_scsi field becomes thereby obsolete and is replaced through .default_block_type = IF_SCSI. This patch also changes the default for s390x to IF_VIRTIO and removes an early hack that converts IF_IDE drives. Other parties have already claimed interest (e.g. IF_SD for exynos) To create a sane default, for machines that dont specify a default_block_type, this patch makes IF_IDE = 0 and IF_NONE = 1. I checked all users of IF_NONE (blockdev.c and ww/device-hotplug.c) as well as IF_IDE and it seems that it is ok to change the defines - in other words, I found no obvious (to me) assumption in the code regarding IF_NONE==0. IF_NONE is only set if there is an explicit if=none. Without if=* the interface becomes IF_DEFAULT. I would suggest to have some additional care, e.g. by letting this patch sit some days in the block tree. Based on an initial patch from Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Igor Mitsyanko <i.mitsyanko@samsung.com> CC: Markus Armbruster <armbru@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-20 22:30:34 +08:00
.block_default_type = IF_SCSI,
DEFAULT_MACHINE_OPTIONS,
};
static QEMUMachine versatileab_machine = {
.name = "versatileab",
.desc = "ARM Versatile/AB (ARM926EJ-S)",
.init = vab_init,
Support default block interfaces per QEMUMachine There are QEMUMachines that have neither IF_IDE nor IF_SCSI as a default/standard interface to their block devices / drives. Therefore, this patch introduces a new field default_block_type per QEMUMachine struct. The prior use_scsi field becomes thereby obsolete and is replaced through .default_block_type = IF_SCSI. This patch also changes the default for s390x to IF_VIRTIO and removes an early hack that converts IF_IDE drives. Other parties have already claimed interest (e.g. IF_SD for exynos) To create a sane default, for machines that dont specify a default_block_type, this patch makes IF_IDE = 0 and IF_NONE = 1. I checked all users of IF_NONE (blockdev.c and ww/device-hotplug.c) as well as IF_IDE and it seems that it is ok to change the defines - in other words, I found no obvious (to me) assumption in the code regarding IF_NONE==0. IF_NONE is only set if there is an explicit if=none. Without if=* the interface becomes IF_DEFAULT. I would suggest to have some additional care, e.g. by letting this patch sit some days in the block tree. Based on an initial patch from Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Igor Mitsyanko <i.mitsyanko@samsung.com> CC: Markus Armbruster <armbru@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-20 22:30:34 +08:00
.block_default_type = IF_SCSI,
DEFAULT_MACHINE_OPTIONS,
};
static void versatile_machine_init(void)
{
qemu_register_machine(&versatilepb_machine);
qemu_register_machine(&versatileab_machine);
}
machine_init(versatile_machine_init);
static void vpb_sic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = vpb_sic_init;
dc->no_user = 1;
dc->vmsd = &vmstate_vpb_sic;
}
static const TypeInfo vpb_sic_info = {
.name = "versatilepb_sic",
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(vpb_sic_state),
.class_init = vpb_sic_class_init,
};
static void versatilepb_register_types(void)
{
type_register_static(&vpb_sic_info);
}
type_init(versatilepb_register_types)