add PnvHomer device model to emulate homer memory access
for pstate table, occ-sensors, slw, occ static and dynamic
values for Power8 and Power9 chips.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-4-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
emulate occ common area region with occ sram device model which
occ and skiboot uses it to communicate regarding sensors, slw
and HWMON in PowerNV emulated host.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-3-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
During PowerNV boot skiboot populates the device tree by
retrieving base address of homer/occ common area from
PBA BARs and prd ipoll mask by accessing xscom read/write
accesses.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190912093056.4516-2-bala24@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unless the machine was started with kernel-irqchip=on, we cannot easily
tell if we're actually using an in-kernel or an emulated irqchip. This
information is important enough that it is worth printing it in 'info
pic'.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156829860985.2073005.5893493824873412773.stgit@bahia.tls.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There were few trailing comments after `/*` instead in
new line and line more than 80 character, these fixes are
trivial and doesn't change any logic in code.
Signed-off-by: Balamuruhan S <bala24@linux.ibm.com>
Message-Id: <20190911142925.19197-5-bala24@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity is reporting in CID 1405304 that tpm_execute() may pass a NULL
tpm_proxy->host_path pointer to open(). This is based on the fact that
h_tpm_comm() does a NULL check on tpm_proxy->host_path and then passes
tpm_proxy to tpm_execute().
The check in h_tpm_comm() is abusive actually since a spapr-proxy-tpm
requires a non NULL host_path property, as checked during realize.
Fixes: 0fb6bd0732
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156805260916.1779401.11054185183758185247.stgit@bahia.lan>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes the dtc output :
ERROR (node_name_chars): //bmc: Bad character '/' in node name
Warning (avoid_unnecessary_addr_size): /bmc: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190902092932.20200-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When we hotplug a CPU on memory-less/cpu-less node, the linux kernel
crashes.
This happens because linux kernel needs to know the NUMA topology at
start to be able to initialize the distance lookup table.
On pseries, the topology is provided by the firmware via the existing
CPUs and memory information. Thus a node without memory and CPU cannot be
discovered by the kernel.
To avoid the kernel crash, do not allow to start pseries with empty
nodes.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190830161345.22436-1-lvivier@redhat.com>
[dwg: Rework to cope with movement of numa state from globals to MachineState]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 9458a9a1df added synchronization
of vCPU and migration operations through calling run_on_cpu operation.
However, in replay mode this synchronization is unneeded, because
I/O and vCPU threads are already synchronized.
This patch disables such synchronization for record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
The 'r' variable was accidently shadowed, and because of this
we were always passing 0 to mpath_generic_sense, instead of original
return value, which triggers an abort()
This is an attempt to fix the
https://bugzilla.redhat.com/show_bug.cgi?id=1720047
although there might be other places in the code
that trigger qemu-pr-helper crash, and this fix might
not be the root cause.
The crash was reproduced by creating an iscsi target on a test machine,
and passing it twice to the guest like that:
-blockdev node-name=idisk0,driver=iscsi,transport=...,target=...
-device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=0,share-rw=on
-device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=1,share-rw=on
Then in the guest, both /dev/sda and /dev/sdb were aggregated by multipath to /dev/mpatha,
which was passed to a nested guest like that
-object pr-manager-helper,id=qemu_pr_helper,path=/root/work/vm/testvm/.run/pr_helper.socket
-blockdev node-name=test,driver=host_device,filename=/dev/mapper/mpatha,pr-manager=qemu_pr_helper
-device scsi-block,drive=test,bus=scsi0.0,bootindex=-1,scsi-id=0,lun=0
The nested guest run:
sg_persist --no-inquiry -v --out --register --param-sark 0x1234 /dev/sda
Strictly speaking this is wrong configuration since qemu is where
the multipath was split, and thus the iscsi target was not aware of
multipath, and thus when libmpathpersist code rightfully tried to register
the PR key on all paths, it failed to do so.
However qemu-pr-helper should not crash in this case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190909131335.16848-4-yury-kotov@yandex-team.ru>
[Reorganize check_migration_status for rebase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the cross compilers rightly complain there are cases where ret
may not be set. 0 seems to be the reasonable default unless particular
slot explicitly returns -1.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can be used to set a DNS server to be used by the guest which is
different from the one configured on the host.
Buglink: https://bugs.launchpad.net/qemu/+bug/1010484
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-7-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-5-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-4-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-3-git-send-email-aleksandar.markovic@rt-rk.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl2PebUSHGFybWJydUBy
ZWRoYXQuY29tAAoJEDhwtADrkYZT/VEP/Rru2BgOV/6OSIunW9Ii6qUsVNYtYM0L
4XrOaVJBhNnakAdPPphXmhk6iRCJESZ+4z+s4Iw+yD4aSRYEWowMFi1blaIk+3lH
BNBllepKrvX9ZZyMHCooKrrO2PEPOPRin5izCDn5O93onQjwzXfWtuxZRn6WaLzB
MOtixr340ysa+KNktpAWWPH/NJFq+LLvyQVUdN5xR1i5YBEVE9s0uZg9uq+zpFEg
xSw45BDQSCjNNywd5mqJ0x+y7PCeGAINS9el43ernn654qVXpNgYepE3PpkCjCH7
snFKFJA8+h1VjXPd8/amJimD11+CFIUlhvtlVwccCWme8PRE6Hveerf7FvexnjpN
yGfDOV2ezgrnFspAjI3hrPfsF1Vfxe+eDOUg+y9xGtRgD5LsWmkUBEukKZocVYQG
H52BT6qt3IlUbWVPuHlWEUOsWKk7e3IeAZgnoaafRxwmLHaVWX0SPZCGm1Bfvxe2
LxXnS/pPWubyTrmQA9xCDhILrvkquCyOVBufFnS6D3h45psQKXr2Rh+vVjnYslRR
/B1tDAFZvu9Q6+Y9//AnnLhTZlEPf+qg7Ajv+rH8PTl7SbB/tNVI+vrJJCp5AJab
OifkqahV4H12STf4N2R3g4j/HqPj2PB1/GdLpmOc94ZY5h8GMxviEpwZkKTnw5xD
zhwDdMVqL6c1
=CNvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-09-28' into staging
QAPI patches for 2019-09-28
# gpg: Signature made Sat 28 Sep 2019 16:18:13 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2019-09-28: (27 commits)
qapi: Improve source file read error handling
qapi: Improve reporting of redefinition
qapi: Improve reporting of missing documentation comment
qapi: Eliminate check_keys(), rename check_known_keys()
qapi: Improve reporting of invalid 'if' further
qapi: Avoid redundant definition references in error messages
qapi: Improve reporting of missing / unknown definition keys
qapi: Improve reporting of invalid flags
qapi: Improve reporting of invalid 'if' errors
qapi: Move context-free checking to the proper place
qapi: Move context-sensitive checking to the proper place
qapi: Inline check_name() into check_union()
qapi: Plumb info to the QAPISchemaMember
qapi: Make check_type()'s array case a bit more obvious
qapi: Move check for reserved names out of add_name()
qapi: Report invalid '*' prefix like any other invalid name
qapi: Use check_name_str() where it suffices
qapi: Improve reporting of invalid name errors
qapi: Reorder check_FOO() parameters for consistency
qapi: Improve reporting of member name clashes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everybody who used something like "-machine accel=kvm:tcg" in the past
might be tempted to specify a similar list with the -accel parameter,
too, for example "-accel kvm:tcg". However, this is not how this
options is thought to be used, since each "-accel" should only take care
of one specific accelerator.
In the long run, we really should rework the "-accel" code completely,
so that it does not set "-machine accel=..." anymore internally, but
is completely independent from "-machine". For the short run, let's
make sure that users cannot use "-accel xyz:tcg", so that we avoid
that we have to deal with such cases in the wild later.
Message-Id: <20190930123505.11607-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Both, "rom->addr" and "addr" are derived from the binary image
that can be loaded with the "-kernel" paramer. The code in
rom_copy() then calculates:
d = dest + (rom->addr - addr);
and uses "d" as destination in a memcpy() some lines later. Now with
bad kernel images, it is possible that rom->addr is smaller than addr,
thus "rom->addr - addr" gets negative and the memcpy() then tries to
copy contents from the image to a bad memory location. This could
maybe be used to inject code from a kernel image into the QEMU binary,
so we better fix it with an additional sanity check here.
Cc: qemu-stable@nongnu.org
Reported-by: Guangming Liu
Buglink: https://bugs.launchpad.net/qemu/+bug/1844635
Message-Id: <20190925130331.27825-1-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity currently complains that the "if (0x00 & (0x80 >> (phase - 8))"
in next-cube.c can never be true. Right it is. The "0x00" is meant as value
of the control register of the RTC, which is currently not implemented yet.
Thus, let's add a register variable for this now. However, the RTC
registers are currently defined as static variables in nextscr2_write(),
which is quite ugly. Thus let's also move the RTC variables to the main
machine state instead. In the long run, we should likely even refactor
the whole RTC code into a separate device in a separate file, but that's
something for calm winter nights later... as a first step, cleaning up
the static variables and shutting up the warning from Coverity should
be sufficient.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190921091738.26953-1-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
While at it, simplify using $(land).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-3-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: dad5ddcea3 ("check: Only test usb-ehci when it is compiled in")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes commit
e5758de4e8 ("tests/libqtest: Make
qtest_qmp_device_add/del independent from global_qtest")
and commit
dd21074972 ("tests/libqtest: Use
libqtest-single.h in tests that require global_qtest").
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-2-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of splitting at an unaligned address, we can simply split at
4TB.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
s390 was trying to solve limited KVM memslot size issue by abusing
memory_region_allocate_system_memory(), which breaks API contract
where the function might be called only once.
Beside an invalid use of API, the approach also introduced migration
issue, since RAM chunks for each KVM_SLOT_MAX_BYTES are transferred in
migration stream as separate RAMBlocks.
After discussion [1], it was agreed to break migration from older
QEMU for guest with RAM >8Tb (as it was relatively new (since 2.12)
and considered to be not actually used downstream).
Migration should keep working for guests with less than 8TB and for
more than 8TB with QEMU 4.2 and newer binary.
In case user tries to migrate more than 8TB guest, between incompatible
QEMU versions, migration should fail gracefully due to non-exiting
RAMBlock ID or RAMBlock size mismatch.
Taking in account above and that now KVM code is able to split too
big MemorySection into several memslots, partially revert commit
(bb223055b s390-ccw-virtio: allow for systems larger that 7.999TB)
and use kvm_set_max_memslot_size() to set KVMSlot size to
KVM_SLOT_MAX_BYTES.
1) [PATCH RFC v2 4/4] s390: do not call memory_region_allocate_system_memory() multiple times
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-5-imammedo@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Max memslot size supported by kvm on s390 is 8Tb,
move logic of splitting RAM in chunks upto 8T to KVM code.
This way it will hide KVM specific restrictions in KVM code
and won't affect board level design decisions. Which would allow
us to avoid misusing memory_region_allocate_system_memory() API
and eventually use a single hostmem backend for guest RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190924144751.24149-4-imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently MemoryRegionSection has 1:1 mapping to KVMSlot.
However next patch will allow splitting MemoryRegionSection into
several KVMSlot-s, make sure that kvm_physical_log_slot_clear()
is able to handle such 1:N mapping.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190924144751.24149-3-imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We may need to clear the dirty bitmap for more than one KVM memslot.
First do some code movement with no semantic change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190924144751.24149-2-imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[fixup line break]
On IBM Z, KVM in the kernel is only implemented for 64-bit mode, and
with regards to TCG, we also only support 64-bit host CPUs (see the
check at the beginning of tcg/s390/tcg-target.inc.c), so we should
remove s390 (without "x", i.e. the old 31-bit mode CPUs) from the
list of supported CPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190928190334.6897-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Return the correct error code when the SCCB buffer is too small to
contain all of the output, for the Read SCP Information and
Read CPU Information commands.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-5-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Requests over 4k are not a spec exception.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-4-git-send-email-imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
All sclp codes need to be checked for page boundary violations.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-3-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Invalid command checking has to be done before the boundary check,
refactoring it now allows to insert the boundary check at the correct
place later.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1569591203-15258-2-git-send-email-imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Balamuruhan S